June 2016 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Wed Jun 1 00:08:27 PDT 2016
Ending: Thu Jun 30 14:24:14 PDT 2016
Messages: 327

• [PATCH 0/12] Add basic support for arm64   Raphael Poggi
• [PATCH 0/12] Add basic support for arm64   Sascha Hauer
• [PATCH 0/12] Add basic support for arm64   Raphaël Poggi
• [PATCH 0/5] Fix problems with DS1307 RTC driver   Trent Piepho
• [PATCH 0/6] MIPS: ath79: sync dts stuff with linux v4.7-rc2   Antony Pavlov
• [PATCH 0/6] MIPS: ath79: sync dts stuff with linux v4.7-rc2   Sascha Hauer
• [PATCH 01/12] arm: add armv8 Kconfig entries   Raphael Poggi
• [PATCH 02/12] arm: Makefile: rework makefile to handle armv8   Raphael Poggi
• [PATCH 02/12] arm: Makefile: rework makefile to handle armv8   Sascha Hauer
• [PATCH 02/12] arm: Makefile: rework makefile to handle armv8   Raphaël Poggi
• [PATCH 03/12] arm: introduce lib64 for arm64 related stuff   Raphael Poggi
• [PATCH 03/12] arm: introduce lib64 for arm64 related stuff   Sascha Hauer
• [PATCH 04/12] arm: cpu: add arm64 specific code   Raphael Poggi
• [PATCH 04/12] arm: cpu: add arm64 specific code   Sascha Hauer
• [PATCH 05/12] arm: include: system: add arm64 helper functions   Raphael Poggi
• [PATCH 06/12] arm: cpu: start: arm64 does not support relocation   Raphael Poggi
• [PATCH 07/12] arm: include: bitops: arm64 use generic __fls   Raphael Poggi
• [PATCH 08/12] arm: include: system_info: add armv8 identification   Raphael Poggi
• [PATCH 08/21] e1000: Consolidate register offset fixups   Andrey Smirnov
• [PATCH 09/12] arm: cpu: cpuinfo: add armv8 support   Raphael Poggi
• [PATCH 1/2] aiodev: imx_thermal: remove empty include   Lucas Stach
• [PATCH 1/2] aiodev: imx_thermal: remove empty include   Sascha Hauer
• [PATCH 1/2] ARM: i.MX clk-pllv2: Do not use a negative value for the unsigned variable   Alexander Shiyan
• [PATCH 1/2] ARM: i.MX clk-pllv2: Do not use a negative value for the unsigned variable   Sascha Hauer
• [PATCH 1/2] defaultenv-2: select BOOTM   Lucas Stach
• [PATCH 1/2] defaultenv-2: select BOOTM   Sascha Hauer
• [PATCH 1/2] defaultenv-2: select BOOTM   Uwe Kleine-König
• [PATCH 1/2] eukrea-cpuimx35: Fix wrong clock gating for ESDHC1   Alexander Kurz
• [PATCH 1/2] ifup: remove deletion of ip env   Alexander Aring
• [PATCH 1/2] ifup: remove deletion of ip env   Sascha Hauer
• [PATCH 1/2] mtd: nand: Set ONFI function hooks earlier   Sascha Hauer
• [PATCH 1/2] scripts: imx-image: super_root_key command depends on header_version 1   Alexander Kurz
• [PATCH 1/2] state: Refactor state framework   Markus Pargmann
• [PATCH 1/2] state: Refactor state framework   Markus Pargmann
• [PATCH 1/3] GUI: Add a function to draw solid rectangles   Andrey Smirnov
• [PATCH 1/3] GUI: Add a function to draw solid rectangles   Holger Schurig
• [PATCH 1/3] GUI: Add a function to draw solid rectangles   Andrey Smirnov
• [PATCH 1/3] MIPS: ath79: pbl: add pbl_ar9331_wmac_enable macro   yegorslists at googlemail.com
• [PATCH 1/3] MIPS: ath79: pbl: add pbl_ar9331_wmac_enable macro   Sascha Hauer
• [PATCH 1/4] ARM: start: Fix arm_mem_barebox_image for !CONFIG_RELOCATABLE   Sascha Hauer
• [PATCH 1/4] commands: ubimkvol: Add option for static volumes   Teresa Remmet
• [PATCH 1/4] mci: imx: Use mci_register() return value for driver probe.   Alexander Shiyan
• [PATCH 1/4] mci: imx: Use mci_register() return value for driver probe.   Sascha Hauer
• [PATCH 1/4] OMAP: xload: Factor out reading image from mtd partition   Teresa Remmet
• [PATCH 1/4] OMAP: xload: Factor out reading image from mtd partition   Sascha Hauer
• [PATCH 1/5] rtc: ds1307: Keep DT based RTC configuration from breaking DS1337/41   Trent Piepho
• [PATCH 1/6] clk: ar933x: fix copyright header   Antony Pavlov
• [PATCH 10/12] arm: cpu: disable code portion in armv8 case   Raphael Poggi
• [PATCH 11/12] arm: cpu: add basic arm64 mmu support   Raphael Poggi
• [PATCH 11/12] arm: cpu: add basic arm64 mmu support   Sascha Hauer
• [PATCH 12/12] arm: boards: add virt board   Raphael Poggi
• [PATCH 12/12] arm: boards: add virt board   Sascha Hauer
• [PATCH 12/12] arm: boards: add virt board   Raphaël Poggi
• [PATCH 12/12] arm: boards: add virt board   Antony Pavlov
• [PATCH 12/12] arm: boards: add virt board   Raphaël Poggi
• [PATCH 12/12] arm: boards: add virt board   Antony Pavlov
• [PATCH 12/12] arm: boards: add virt board   Raphaël Poggi
• [PATCH 17/17] common: Kconfig: Remove orphaned dependency LOAD_PBL_SRAM   Alexander Shiyan
• [PATCH 17/17] common: Kconfig: Remove orphaned dependency LOAD_PBL_SRAM   Sascha Hauer
• [PATCH 2/2] aiodev: imx_thermal: depend on MACH_IMX6   Lucas Stach
• [PATCH 2/2] ARM: i.MX: central SOC type definition   Alexander Kurz
• [PATCH 2/2] ARM: i.MX clk-pllv1: Do not use a negative value for the unsigned variable   Alexander Shiyan
• [PATCH 2/2] docs: Add/Update state documentation   Markus Pargmann
• [PATCH 2/2] ifup: fix handling when ip env is not given   Alexander Aring
• [PATCH 2/2] ifup: fix handling when ip env is not given   Sascha Hauer
• [PATCH 2/2] imx35-regs: add and use common CGR element shifters   Alexander Kurz
• [PATCH 2/2] mtd: fix mtdraw_erase stub signature   Lucas Stach
• [PATCH 2/2] mtd: fix mtdraw_erase stub signature   Uwe Kleine-König
• [PATCH 2/2] mtd: nand_mxs: Setup timing   Sascha Hauer
• [PATCH 2/3] GUI: Add code to draw simple graphics   Andrey Smirnov
• [PATCH 2/3] GUI: Add code to draw simple graphics   Holger Schurig
• [PATCH 2/3] GUI: Add code to draw simple graphics   Andrey Smirnov
• [PATCH 2/3] MIPS: black-swift: pbl: init WMAC   yegorslists at googlemail.com
• [PATCH 2/4] ARM: start: do not change barebox_boarddata   Sascha Hauer
• [PATCH 2/4] mci: imx: Add devicetree options parsing by MCI core.   Alexander Shiyan
• [PATCH 2/4] mtd: UBI: Add support for updating static volumes   Teresa Remmet
• [PATCH 2/4] mtd: UBI: Add support for updating static volumes   Sascha Hauer
• [PATCH 2/4] mtd: UBI: Add support for updating static volumes   Teresa Remmet
• [PATCH 2/4] OMAP: xload: nand: Check for redundant barebox partition   Teresa Remmet
• [PATCH 2/5] rtc: ds1307: Remove unused and unneeded driver code   Trent Piepho
• [PATCH 2/6] MIPS: ath79: dts: sync clk stuff with linux v4.7-rc2   Antony Pavlov
• [PATCH 3/3] GUI: Add fbtest command   Andrey Smirnov
• [PATCH 3/3] GUI: Add fbtest command   Antony Pavlov
• [PATCH 3/3] GUI: Add fbtest command   Antony Pavlov
• [PATCH 3/3] GUI: Add fbtest command   Sascha Hauer
• [PATCH 3/3] GUI: Add fbtest command   Holger Schurig
• [PATCH 3/3] GUI: Add fbtest command   Sascha Hauer
• [PATCH 3/3] GUI: Add fbtest command   Andrey Smirnov
• [PATCH 3/3] GUI: Add fbtest command   Andrey Smirnov
• [PATCH 3/3] GUI: Add fbtest command   Andrey Smirnov
• [PATCH 3/3] GUI: Add fbtest command   Andrey Smirnov
• [PATCH 3/3] MIPS: tplink-mr3020: pbl: init WMAC   yegorslists at googlemail.com
• [PATCH 3/4] ARM: start: simplify board_data sdram allocation   Sascha Hauer
• [PATCH 3/4] commands: ubi: Add ubiupdatevol command   Teresa Remmet
• [PATCH 3/4] commands: ubi: Add ubiupdatevol command   Sascha Hauer
• [PATCH 3/4] commands: ubi: Add ubiupdatevol command   Teresa Remmet
• [PATCH 3/4] mci: core: Do not fail if vmmc regulator fail   Alexander Shiyan
• [PATCH 3/4] OMAP: am33xx_bbu_nand: Extent barebox update handler   Teresa Remmet
• [PATCH 3/5] rtc: ds1307: Clean up of chip variant support   Trent Piepho
• [PATCH 3/5] rtc: ds1307: Clean up of chip variant support   Andrey Smirnov
• [PATCH 3/6] MIPS: ath79: dts: sync uart stuff with linux v4.7-rc2   Antony Pavlov
• [PATCH 4/4] ARM: am335x_defconfig: Enable ubi fastmap and ubifs   Teresa Remmet
• [PATCH 4/4] ARM: phytec-som-am335x: Add backup partition for barebox   Teresa Remmet
• [PATCH 4/4] ARM: start: drop unnecessary variable   Sascha Hauer
• [PATCH 4/4] mci: imx-esdhc: Remove excess function   Alexander Shiyan
• [PATCH 4/5] rtc: ds1307: Allow configuring DS1337 type chips   Trent Piepho
• [PATCH 4/5] rtc: ds1307: Allow configuring DS1337 type chips   Andrey Smirnov
• [PATCH 4/6] MIPS: ath79: dts: sync spi stuff with linux v4.7-rc2   Antony Pavlov
• [PATCH 5/5] rtc: ds1307: Limit clock starting retries   Trent Piepho
• [PATCH 5/5] rtc: ds1307: Limit clock starting retries   Andrey Smirnov
• [PATCH 5/6] MIPS: ath79: dts: tplink-mr3020.dts: sync with linux v4.7-rc2   Antony Pavlov
• [PATCH 6/6] MIPS: ath79: dts: use ar9331.dtsi from linux v4.7-rc2   Antony Pavlov
• [PATCH] Add more files to .gitignore   Alexander Shiyan
• [PATCH] Add more files to .gitignore   Sascha Hauer
• [PATCH] Add more files to .gitignore   Holger Schurig
• [PATCH] Add support for Baltos systems   Sascha Hauer
• [PATCH] ARM: boards: variscite-mx6: Remove the excess assignment   Alexander Shiyan
• [PATCH] ARM: boards: variscite-mx6: Remove the excess assignment   Sascha Hauer
• [PATCH] ARM: boot: add prepend option for board specific ATAGs   Alexander Kurz
• [PATCH] ARM: boot: add prepend option for board specific ATAGs   Sascha Hauer
• [PATCH] ARM: i.MX: Remove unised procedure imx25_setup_weimcs   Alexander Shiyan
• [PATCH] ARM: i.MX: Remove unised procedure imx25_setup_weimcs   Uwe Kleine-König
• [PATCH] ARM: i.MX: Remove unised procedure imx25_setup_weimcs   Sascha Hauer
• [PATCH] ARM: imx_v7_defconfig: enable LED_GPIO_OF   Alexander Kurz
• [PATCH] ARM: imx_v7_defconfig: enable LED_GPIO_OF   Alexander Kurz
• [PATCH] ARM: imx_v7_defconfig: enable LED_GPIO_OF   Sascha Hauer
• [PATCH] ARM: mba53: include barebox TQMa53 overlay DT   Sascha Hauer
• [PATCH] ARM i.MX: de-duplicate PLL initializer macros   Alexander Kurz
• [PATCH] ARM iMX53: avoid magic number addressing for internal RAM   Alexander Kurz
• [PATCH] ARM iMX53: avoid magic number addressing for internal RAM   Sascha Hauer
• [PATCH] boot command: Make verbose/dryrun options work again   Sascha Hauer
• [PATCH] commands/Kconfig: Fix a typo   Andrey Smirnov
• [PATCH] crypto: crc32: Optimize dynamic CRC table generation   Alexander Shiyan
• [PATCH] crypto: crc32: Optimize dynamic CRC table generation   Sascha Hauer
• [PATCH] Documentation: imx: external boot capable SOC list complete   Alexander Kurz
• [PATCH] Documentation: imx: external boot capable SOC list complete   Sascha Hauer
• [PATCH] Do not rm the path from pbl-y target   zzs213 at 126.com
• [PATCH] Do not rm the path from pbl-y target   Sascha Hauer
• [PATCH] Do not rm the path from pbl-y target   Sascha Hauer
• [PATCH] Do not rm the path from pbl-y target   张忠山
• [PATCH] Do not rm the path from pbl-y target   Sascha Hauer
• [PATCH] eeprom: at24: fix discarding const qualifier   Sascha Hauer
• [PATCH] eeprom: at24: Use xasprintf for small allocation   Sascha Hauer
• [PATCH] Fix genphy_restart_aneg() for Micrel's ksz9031.   Guillermo Rodriguez Garcia
• [PATCH] Fix genphy_restart_aneg() for Micrel's ksz9031.   Sascha Hauer
• [PATCH] Fix genphy_restart_aneg() for Micrel's ksz9031.   Guillermo Rodriguez Garcia
• [PATCH] Fix genphy_restart_aneg() for Micrel's ksz9031.   Sascha Hauer
• [PATCH] Fix genphy_restart_aneg() for Micrel's ksz9031.   Guillermo Rodriguez Garcia
• [PATCH] fix IORESOURCE_MEM_xxx usage in dm9k driver   zzs213 at 126.com
• [PATCH] fix IORESOURCE_MEM_xxx usage in dm9k driver   Sascha Hauer
• [PATCH] fix IORESOURCE_MEM_xxx usage in dm9k driver   张忠山
• [PATCH] fix IORESOURCE_MEM_xxx usage in dm9k driver   张忠山
• [PATCH] fix IORESOURCE_MEM_xxx usage in dm9k driver   张忠山
• [PATCH] fs: squashfs: use correct format specifier   Lucas Stach
• [PATCH] fs: squashfs: use correct format specifier   Sascha Hauer
• [PATCH] input: Compile keymap only if necessary   Alexander Shiyan
• [PATCH] input: Compile keymap only if necessary   Sascha Hauer
• [PATCH] mci: Fix version numbers again   Sascha Hauer
• [PATCH] mfd: mc13xxx: VGEN1 and VGEN2 voltage bits positioned in "Regulator Setting 0" register   Alexander Shiyan
• [PATCH] mfd: mc13xxx: VGEN1 and VGEN2 voltage bits positioned in "Regulator Setting 0" register   Sascha Hauer
• Re: [PATCH] mfd: mc13xxx: VGEN1 and VGEN2 voltage bits positioned in "Regulator Setting 0" register   Alexander Shiyan
• [PATCH] MIPS: dts: add generated files to clean rule   Antony Pavlov
• [PATCH] MIPS: dts: add generated files to clean rule   Sascha Hauer
• [PATCH] mtd: nand: gpmi: Fix ecc strength calculation   Sascha Hauer
• [PATCH] mtd: nand: gpmi: Use subpage reads only on suitable NAND chips   Sascha Hauer
• [PATCH] mtd: nand: simplify nand_block_checkbad   Uwe Kleine-König
• [PATCH] mtd: nand: simplify nand_block_checkbad   Sascha Hauer
• [PATCH] mtd: ubi: Fix endless loop when moving PEB   Teresa Remmet
• [PATCH] mtd: ubi: Fix endless loop when moving PEB   Sascha Hauer
• [PATCH] mtd: ubi: Fix endless loop when moving PEB   Teresa Remmet
• [PATCH] mtd: ubi: Fix endless loop when moving PEB   Sascha Hauer
• [PATCH] net: phy: make locally used of_phy_register_fixed_link() static   Antony Pavlov
• [PATCH] net: phy: make locally used of_phy_register_fixed_link() static   Sascha Hauer
• [PATCH] net: smc911x: Add parsing devicetree options   Alexander Shiyan
• [PATCH] net: smc911x: Add parsing devicetree options   Sascha Hauer
• [PATCH] ppc: fix USPRG0 define   J. Tang
• [PATCH] ppc: fix USPRG0 define   Sascha Hauer
• [PATCH] spi: imx: Remove the use of property "fsl, spi-num-chipselects"   Alexander Shiyan
• [PATCH] spi: imx: Remove the use of property "fsl, spi-num-chipselects"   Sascha Hauer
• [PATCH] state: select CRC32   Lucas Stach
• [PATCH] state: select CRC32   Sascha Hauer
• [PATCH RFC] common: env: handle var="" not as var=NULL   Alexander Aring
• [PATCH RFC] common: env: handle var="" not as var=NULL   Sascha Hauer
• [PATCH v2 0/6] state: Refactor backend   Markus Pargmann
• [PATCH v2 00/22] e1000 code cleanup and iNVM support   Andrey Smirnov
• [PATCH v2 00/22] e1000 code cleanup and iNVM support   Sascha Hauer
• [PATCH v2 01/12] arm: add armv8 Kconfig entries   Raphael Poggi
• [PATCH v2 01/12] arm: add armv8 Kconfig entries   Sascha Hauer
• [PATCH v2 01/12] arm: add armv8 Kconfig entries   Raphaël Poggi
• [PATCH v2 01/22] e1000: Split driver into multiple files   Andrey Smirnov
• [PATCH v2 02/12] arm: Makefile: rework makefile to handle armv8   Raphael Poggi
• [PATCH v2 02/22] e1000: Include <net.h> in e1000.h   Andrey Smirnov
• [PATCH v2 03/12] arm: introduce lib64 for arm64 related stuff   Raphael Poggi
• [PATCH v2 03/12] arm: introduce lib64 for arm64 related stuff   Sascha Hauer
• [PATCH v2 03/12] arm: introduce lib64 for arm64 related stuff   Raphaël Poggi
• [PATCH v2 03/22] e1000: Convert E1000_*_REG macros to functions   Andrey Smirnov
• [PATCH v2 04/12] arm: cpu: add arm64 specific code   Raphael Poggi
• [PATCH v2 04/22] e1000: Fix a bug in e1000_detect_gig_phy   Andrey Smirnov
• [PATCH v2 05/12] arm: include: system: add arm64 helper functions   Raphael Poggi
• [PATCH v2 05/22] e1000: Remove unnecessary variable   Andrey Smirnov
• [PATCH v2 06/12] arm: cpu: start: arm64 does not support relocation   Raphael Poggi
• [PATCH v2 06/22] e1000: Do not read same register twice   Andrey Smirnov
• [PATCH v2 07/12] arm: include: bitops: arm64 use generic __fls   Raphael Poggi
• [PATCH v2 07/22] e1000: Remove unneeded i210 specific register code   Andrey Smirnov
• [PATCH v2 08/12] arm: include: system_info: add armv8 identification   Raphael Poggi
• [PATCH v2 08/22] e1000: Consolidate register offset fixups   Andrey Smirnov
• [PATCH v2 09/12] arm: cpu: cpuinfo: add armv8 support   Raphael Poggi
• [PATCH v2 09/22] e1000: Remove 'use_eewr' parameter   Andrey Smirnov
• [PATCH v2 1/4] commands: ubimkvol: Add option for static volumes   Teresa Remmet
• [PATCH v2 1/4] GUI: Add a function to draw vertical/horizontal bars   Andrey Smirnov
• [PATCH v2 1/4] GUI: Add a function to draw vertical/horizontal bars   Sascha Hauer
• [PATCH v2 1/4] GUI: Add a function to draw vertical/horizontal bars   Andrey Smirnov
• [PATCH v2 1/6] libfile: Change write_full to be have const buf   Markus Pargmann
• [PATCH v2 10/12] arm: cpu: disable code portion in armv8 case   Raphael Poggi
• [PATCH v2 10/22] e1000: Remove 'page_size'   Andrey Smirnov
• [PATCH v2 11/12] arm: cpu: add basic arm64 mmu support   Raphael Poggi
• [PATCH v2 11/22] e1000: Simplify EEPROM init for e1000_80003es2lan   Andrey Smirnov
• [PATCH v2 12/12] arm: boards: add mach-qemu and virt64 board   Raphael Poggi
• [PATCH v2 12/22] e1000: Simplify EEPROM init for e1000_igb   Andrey Smirnov
• [PATCH v2 13/22] e1000: Consolidate SPI EEPROM init code   Andrey Smirnov
• [PATCH v2 14/22] e1000: Consolidate Microwire EEPROM init code   Andrey Smirnov
• [PATCH v2 15/22] e1000: Fix a bug in e1000_probe()   Andrey Smirnov
• [PATCH v2 16/22] e1000: Remove unnecessary intialization   Andrey Smirnov
• [PATCH v2 17/22] e1000: Refactor Flash/EEPROM reading code   Andrey Smirnov
• [PATCH v2 18/22] e1000: Properly release SW_FW_SYNC semaphore bits   Andrey Smirnov
• [PATCH v2 19/22] e1000: Add EEPROM access locking for i210   Andrey Smirnov
• [PATCH v2 2/4] GUI: Add code to draw simple graphics   Andrey Smirnov
• [PATCH v2 2/4] mtd: UBI: Add support for updating static volumes   Teresa Remmet
• [PATCH v2 2/6] state: Refactor state framework   Markus Pargmann
• [PATCH v2 20/22] e1000: Add a "poll register" function   Andrey Smirnov
• [PATCH v2 21/22] e1000: Expose i210's iNVM as a cdev   Andrey Smirnov
• [PATCH v2 22/22] e1000: Expose i210's external flash as MTD   Andrey Smirnov
• [PATCH v2 3/4] commands: ubi: Add ubiupdatevol command   Teresa Remmet
• [PATCH v2 3/4] commands: ubi: Add ubiupdatevol command   Sascha Hauer
• [PATCH v2 3/4] commands: ubi: Add ubiupdatevol command   Teresa Remmet
• [PATCH v2 3/4] GUI: Add fbtest command   Andrey Smirnov
• [PATCH v2 3/4] GUI: Add fbtest command   Sascha Hauer
• [PATCH v2 3/4] GUI: Add fbtest command   Andrey Smirnov
• [PATCH v2 3/6] docs: Add/Update state documentation   Markus Pargmann
• [PATCH v2 4/4] ARM: am335x_defconfig: Enable ubi fastmap and ubifs   Teresa Remmet
• [PATCH v2 4/4] video/edid: Move int_sqrt() out   Andrey Smirnov
• [PATCH v2 4/4] video/edid: Move int_sqrt() out   Antony Pavlov
• [PATCH v2 4/4] video/edid: Move int_sqrt() out   Andrey Smirnov
• [PATCH v2 4/6] state: also append backend storage stridesize   Markus Pargmann
• [PATCH v2 5/6] state: backend_storage_direct: also use cached data on write   Markus Pargmann
• [PATCH v2 5/6] state: backend_storage_direct: also use cached data on write   Sascha Hauer
• [PATCH v2 5/6] state: backend_storage_direct: also use cached data on write   Michael Grzeschik
• [PATCH v2 5/6] state: backend_storage_direct: also use cached data on write   Markus Pargmann
• [PATCH v2 6/6] barebox-state: handle flush errno correctly   Markus Pargmann
• [PATCH v2] Add support for Baltos systems   Sascha Hauer
• [PATCH v2] Add support for Baltos systems   Yegor Yefremov
• [PATCH v2] Add support for Baltos systems   Sascha Hauer
• [PATCH v2] Add support for Baltos systems   Yegor Yefremov
• [PATCH v2] Add support for Baltos systems   Yegor Yefremov
• [PATCH v3 0/12] Add basic support for arm64   Raphael Poggi
• [PATCH v3 01/14] arm: add armv8 Kconfig entries   Raphael Poggi
• [PATCH v3 02/14] arm: Makefile: rework makefile to handle armv8   Raphael Poggi
• [PATCH v3 03/14] arm: introduce lib64 for arm64 related stuff   Raphael Poggi
• [PATCH v3 03/14] arm: introduce lib64 for arm64 related stuff   Sascha Hauer
• [PATCH v3 03/14] arm: introduce lib64 for arm64 related stuff   Raphaël Poggi
• [PATCH v3 03/14] arm: introduce lib64 for arm64 related stuff   Sascha Hauer
• [PATCH v3 03/14] arm: introduce lib64 for arm64 related stuff   Raphaël Poggi
• [PATCH v3 04/14] arm: cpu: add arm64 specific code   Raphael Poggi
• [PATCH v3 05/14] arm: include: system: add arm64 helper functions   Raphael Poggi
• [PATCH v3 06/14] arm: cpu: start: arm64 does not support relocation   Raphael Poggi
• [PATCH v3 06/14] arm: cpu: start: arm64 does not support relocation   Sascha Hauer
• [PATCH v3 06/14] arm: cpu: start: arm64 does not support relocation   Raphaël Poggi
• [PATCH v3 06/14] arm: cpu: start: arm64 does not support relocation   Sascha Hauer
• [PATCH v3 07/14] arm: include: bitops: arm64 use generic __fls   Raphael Poggi
• [PATCH v3 08/14] arm: include: system_info: add armv8 identification   Raphael Poggi
• [PATCH v3 09/14] arm: cpu: cpuinfo: add armv8 support   Raphael Poggi
• [PATCH v3 1/4] GUI: Add a function to draw vertical/horizontal bars   Andrey Smirnov
• [PATCH v3 1/4] GUI: Add a function to draw vertical/horizontal bars   Sascha Hauer
• [PATCH v3 10/14] arm: cpu: disable code portion in armv8 case   Raphael Poggi
• [PATCH v3 11/14] arm: cpu: add basic arm64 mmu support   Raphael Poggi
• [PATCH v3 11/14] arm: cpu: add basic arm64 mmu support   Sascha Hauer
• [PATCH v3 12/14] arm: boards: add mach-qemu and virt64 board   Raphael Poggi
• [PATCH v3 13/14] arm: include: swab: use rigth assembly for armv8   Raphael Poggi
• [PATCH v3 14/14] uimage: add define for ARM64 architecture   Raphael Poggi
• [PATCH v3 2/4] GUI: Add code to draw simple graphics   Andrey Smirnov
• [PATCH v3 3/4] video/edid: Move int_sqrt() out   Andrey Smirnov
• [PATCH v3 4/4] GUI: Add fbtest command   Andrey Smirnov
• [PATCH v4 0/12] Add basic support for arm64   Raphael Poggi
• [PATCH v4 01/13] arm64: add armv8 Kconfig entries   Raphael Poggi
• [PATCH v4 02/13] arm: Makefile: rework makefile to handle armv8   Raphael Poggi
• [PATCH v4 03/13] arm: rework lib directory to support arm64   Raphael Poggi
• [PATCH v4 04/13] arm: cpu: add arm64 specific code   Raphael Poggi
• [PATCH v4 05/13] arm: include: system: add arm64 helper functions   Raphael Poggi
• [PATCH v4 06/13] arm: include: bitops: arm64 use generic __fls   Raphael Poggi
• [PATCH v4 07/13] arm: include: system_info: add armv8 identification   Raphael Poggi
• [PATCH v4 08/13] arm: cpu: cpuinfo: add armv8 support   Raphael Poggi
• [PATCH v4 09/13] arm: cpu: disable code portion in armv8 case   Raphael Poggi
• [PATCH v4 10/13] arm: cpu: add basic arm64 mmu support   Raphael Poggi
• [PATCH v4 11/13] arm: boards: add mach-qemu and virt64 board   Raphael Poggi
• [PATCH v4 12/13] arm: include: swab: use rigth assembly for armv8   Raphael Poggi
• [PATCH v4 13/13] uimage: add define for ARM64 architecture   Raphael Poggi
• [RFC 0/1] am335x kernel not booting   Stefan Müller-Klieser
• [RFC 0/1] am335x kernel not booting   Sascha Hauer
• [RFC 1/1] ARM: bootm: recalculate decompression space   Stefan Müller-Klieser
• [RFC 1/1] ARM: bootm: recalculate decompression space   Sascha Hauer
• ARM memory layout   Daniel Krüger
• ARM memory layout   Sascha Hauer
• ARM memory layout   Daniel Krüger
• barebox dts/ directory has no updates for several mouths   Antony Pavlov
• barebox dts/ directory has no updates for several mouths   Sascha Hauer
• Boot iMX6 from IRAM on new Variscite SOM   Michael D. Burkey
• Boot iMX6 from IRAM on new Variscite SOM   Sascha Hauer
• Early access I2C and/or clock for iMX6?   Michael D. Burkey
• Early access I2C and/or clock for iMX6?   Michael D. Burkey
• Early access I2C and/or clock for iMX6?   Sascha Hauer
• how much contents can put to root dir   张忠山
• how much contents can put to root dir   Sascha Hauer
• No subject   Raphael Poggi
• No subject   Raphaël Poggi
• No subject   Sascha Hauer
• Problem with parcel shipping, ID:00000477165   FedEx International Economy
• Support USB port SAMA5D3   ner0
• Support USB port SAMA5D3   Sascha Hauer
• Support USB port SAMA5D3   Sascha Hauer
• v2016.06.0   Sascha Hauer
• Writing UBI image directly to flash from barebox   Guillermo Rodriguez Garcia
• Writing UBI image directly to flash from barebox   Alexander Richter
• Writing UBI image directly to flash from barebox   Juergen Borleis
• Writing UBI image directly to flash from barebox   Jan Remmet
• Writing UBI image directly to flash from barebox   Guillermo Rodriguez Garcia
• Writing UBI image directly to flash from barebox   Jan Remmet
• Writing UBI image directly to flash from barebox   Juergen Borleis

Last message date: Thu Jun 30 14:24:14 PDT 2016
Archived on: Thu Jun 30 14:26:40 PDT 2016

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...