[PATCH v2 11/22] e1000: Simplify EEPROM init for e1000_80003es2lan

Andrey Smirnov andrew.smirnov at gmail.com
Wed Jun 1 21:58:40 PDT 2016


That chip specifies read access uising EERD via use_eerd, which means
that none of the more "advanced" EEPROM parameters will be used for
reads, so remove them.

Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
---
 drivers/net/e1000/eeprom.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/net/e1000/eeprom.c b/drivers/net/e1000/eeprom.c
index e4ef5f9..63e84c1 100644
--- a/drivers/net/e1000/eeprom.c
+++ b/drivers/net/e1000/eeprom.c
@@ -369,13 +369,6 @@ int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
 		break;
 	case e1000_80003es2lan:
 		eeprom->type = e1000_eeprom_spi;
-		eeprom->opcode_bits = 8;
-		eeprom->delay_usec = 1;
-		if (eecd & E1000_EECD_ADDR_BITS)
-			eeprom->address_bits = 16;
-		else
-			eeprom->address_bits = 8;
-
 		eeprom->use_eerd = true;
 		break;
 	case e1000_igb:
-- 
2.5.5




More information about the barebox mailing list