[PATCH v2 09/22] e1000: Remove 'use_eewr' parameter

[Andrey Smirnov]

Remove 'use_eewr' from 'struct e1000_eeprom_info' since it is not used
anywhere in the code.

Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
---
 drivers/net/e1000/e1000.h  | 1 -
 drivers/net/e1000/eeprom.c | 7 -------
 2 files changed, 8 deletions(-)

diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 1d0b3c6..585e3ff 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -695,7 +695,6 @@ struct e1000_eeprom_info {
 	uint16_t delay_usec;
 	uint16_t page_size;
 	bool use_eerd;
-	bool use_eewr;
 };
 
 #define E1000_EEPROM_SWDPIN0   0x0001	/* SWDPIN 0 EEPROM Value */
diff --git a/drivers/net/e1000/eeprom.c b/drivers/net/e1000/eeprom.c
index c2dfad5..b6414b2 100644
--- a/drivers/net/e1000/eeprom.c
+++ b/drivers/net/e1000/eeprom.c
@@ -289,7 +289,6 @@ int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
 		eeprom->address_bits = 6;
 		eeprom->delay_usec = 50;
 		eeprom->use_eerd = false;
-		eeprom->use_eewr = false;
 	break;
 	case e1000_82540:
 	case e1000_82545:
@@ -307,7 +306,6 @@ int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
 			eeprom->address_bits = 6;
 		}
 		eeprom->use_eerd = false;
-		eeprom->use_eewr = false;
 		break;
 	case e1000_82541:
 	case e1000_82541_rev_2:
@@ -337,7 +335,6 @@ int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
 			}
 		}
 		eeprom->use_eerd = false;
-		eeprom->use_eewr = false;
 		break;
 	case e1000_82571:
 	case e1000_82572:
@@ -352,7 +349,6 @@ int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
 			eeprom->address_bits = 8;
 		}
 		eeprom->use_eerd = false;
-		eeprom->use_eewr = false;
 		break;
 	case e1000_82573:
 	case e1000_82574:
@@ -368,7 +364,6 @@ int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
 		}
 		if (e1000_is_onboard_nvm_eeprom(hw) == false) {
 			eeprom->use_eerd = true;
-			eeprom->use_eewr = true;
 
 			eeprom->type = e1000_eeprom_flash;
 			eeprom->word_size = 2048;
@@ -391,7 +386,6 @@ int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
 			eeprom->address_bits = 8;
 		}
 		eeprom->use_eerd = true;
-		eeprom->use_eewr = false;
 		break;
 	case e1000_igb:
 		/* i210 has 4k of iNVM mapped as EEPROM */
@@ -401,7 +395,6 @@ int32_t e1000_init_eeprom_params(struct e1000_hw *hw)
 		eeprom->page_size = 32;
 		eeprom->address_bits = 16;
 		eeprom->use_eerd = true;
-		eeprom->use_eewr = false;
 		break;
 	default:
 		break;
-- 
2.5.5