March 2012 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Thu Mar 1 08:50:12 EST 2012
Ending: Fri Mar 30 12:34:59 EDT 2012
Messages: 291

• [PATCH 1/2] pcaam1: Add support for the Phytec phyCARD-A-M1 (PCA-A-M1)   Christian Hemp
  • [PATCH 1/2] pcaam1: Add support for the Phytec phyCARD-A-M1 (PCA-A-M1)   Sascha Hauer
• [PATCH 2/2] pcaam1: Change the machine id/name to follow the phyCARD naming convention   Christian Hemp
  • [PATCH 2/2] pcaam1: Change the machine id/name to follow the phyCARD naming convention   Sascha Hauer
• [PATCH 1/3] pm9g45: fix Ethernet   Asen Chavdarov Dimov
  • [PATCH 3/3] pm9g45: enable USB OHCI host and USB mass storage   Asen Chavdarov Dimov
    • [PATCH 3/3] pm9g45: enable USB OHCI host and USB mass storage   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 3/3] pm9g45: enable USB OHCI host and USB mass storage   RONETIX - Asen Dimov
      • [PATCH 3/3] pm9g45: enable USB OHCI host and USB mass storage   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/3] pm9g45: fix Ethernet   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH v2 1/4] pm9g45: boot from NAND   Asen Chavdarov Dimov
    • [PATCH v2 1/4] pm9g45: boot from NAND   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH v2 1/4] pm9g45: boot from NAND   RONETIX - Asen Dimov
      • [PATCH v2 1/4] pm9g45: boot from NAND   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH v2 1/4] pm9g45: boot from NAND   RONETIX - Asen Dimov
  • [PATCH v2 2/4] pm9g45: fix Ethernet   Asen Chavdarov Dimov
    • [PATCH v2 2/4] pm9g45: fix Ethernet   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH v2 3/4] pm9g45: enable MCI0   Asen Chavdarov Dimov
    • [PATCH v2 3/4] pm9g45: enable MCI0   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH v2 4/4] pm9g45: enable USB OHCI host and USB mass storage   Asen Chavdarov Dimov
    • [PATCH v2 4/4] pm9g45: enable USB OHCI host and USB mass storage   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH v3 1/4] pm9g45: boot from NAND   Asen Chavdarov Dimov
  • [PATCH v3 2/4] pm9g45: fix Ethernet   Asen Chavdarov Dimov
  • [PATCH v3 3/4] pm9g45: enable MCI0   Asen Chavdarov Dimov
    • [PATCH v3 3/4] pm9g45: enable MCI0   Sascha Hauer
      • [PATCH v3 3/4] pm9g45: enable MCI0   RONETIX - Asen Dimov
      • [PATCH v3 3/4] pm9g45: enable MCI0   Sascha Hauer
  • [PATCH v3 4/4] pm9g45: enable USB OHCI host and USB mass storage   Asen Chavdarov Dimov
• [PATCH 2/3] pm9g45: enable MCI0   Asen Chavdarov Dimov
  • [PATCH 2/3] pm9g45: enable MCI0   Jean-Christophe PLAGNIOL-VILLARD
• Booting PPC Linux   Renaud Barbier
  • Booting PPC Linux   Sascha Hauer
    • Booting PPC Linux   Renaud Barbier
• [PATCH 2/2] pandaboard: Add gpmc_generic_init to board init.   Jan Weitzel
  • [PATCH 2/2] pandaboard: Add gpmc_generic_init to board init.   Belisko Marek
• [PATCH] pca-a-l1: remove duplicate includes   Teresa Gámez
  • [PATCH] pca-a-l1: remove duplicate includes   Sascha Hauer
• AT91SAM9G45: MACB: not usable Ethernet when MMU is enabled   RONETIX - Asen Dimov
  • AT91SAM9G45: MACB: not usable Ethernet when MMU is enabled   Jean-Christophe PLAGNIOL-VILLARD
  • AT91SAM9G45: MACB: not usable Ethernet when MMU is enabled   Sascha Hauer
    • AT91SAM9G45: MACB: not usable Ethernet when MMU is enabled   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] net: use net_alloc_packet to allocate packet   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/5] net: introduce net_free_packet to free the packet   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/5] macb: implement alloc_packet & free_packet   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 4/5] macb: implement alloc_packet & free_packet   Sascha Hauer
      • [PATCH 4/5] macb: implement alloc_packet & free_packet   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] net: allow the drivers to specify the tx buffer allocator   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] macb: add timeout on send   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 5/5] macb: add timeout on send   Sascha Hauer
    • [PATCH 5/5] macb: add timeout on send   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] omap: move scale_vcores to omap4_generic   Jan Weitzel
  • [PATCH 1/2] omap: move scale_vcores to omap4_generic   Sascha Hauer
• [PATCH 2/2] omap: move do_set_mux to omap4_generic   Jan Weitzel
  • [PATCH 2/2] omap: move do_set_mux to omap4_generic   Sascha Hauer
    • [PATCH 1/2 v2] omap: move scale_vcores to omap4_generic   Jan Weitzel
      • [PATCH 1/2 v2] omap: move scale_vcores to omap4_generic   Sascha Hauer
    • [PATCH 2/2 v2] omap: move do_set_mux to omap4_generic   Jan Weitzel
• [PATCH] mach-omap: add HAS_DEBUG_LL   Jan Weitzel
  • [PATCH] mach-omap: add HAS_DEBUG_LL   Sascha Hauer
• [PATCH 1/2 v2] macb: add timeout on send   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/2] macb: fix mmu support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH/RFC 3/4] barebox-data: add barebox-data sections   Sascha Hauer
• [PATCH/RFC 4/4] memtest: rewrite memtest commands   Sascha Hauer
• v2012.03.0   Sascha Hauer
• [PATCH] net: dhcp: allow to set transmitted vendor id   Enrico Scholz
  • [PATCH] net: dhcp: allow to set transmitted vendor id   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH] net: dhcp: allow to set transmitted vendor id   Sascha Hauer
• [PATCH] show_progress: minor optimizations   Enrico Scholz
• [PATCH] fs: flush device on close   Enrico Scholz
  • [PATCH] fs: flush device on close   Sascha Hauer
• [PATCH] bmp: honor alpha channel bits   Enrico Scholz
• [PATCH] fb: added flush() method to synchronize the used DMA buffer   Enrico Scholz
• [PATCH] NET: Add support for ks8851_mll   Jan Weitzel
  • [PATCH] NET: Add support for ks8851_mll   Sascha Hauer
    • [PATCH v2] NET: Add support for ks8851_mll   Jan Weitzel
      • [PATCH v2] NET: Add support for ks8851_mll   Sascha Hauer
• [PATCH] omap: add support for phycard-a-xl2   Jan Weitzel
  • [PATCH] omap: add support for phycard-a-xl2   Sascha Hauer
    • [PATCH v2] omap: add support for phycard-a-xl2   Jan Weitzel
      • [PATCH v2] omap: add support for phycard-a-xl2   Sascha Hauer
• __bss_stop question   George Stefan
  • __bss_stop question   Jean-Christophe PLAGNIOL-VILLARD
    • __bss_stop question   George Stefan
• [PATCH 1/1] net: dhcp: allow to set transmitted vendor id   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] net: dhcp: allow to set transmitted vendor id   Sascha Hauer
• [RFC V2 0/6] barebox PCI support   Antony Pavlov
  • [RFC V2 1/6] PCI: initial commit (draft)   Antony Pavlov
    • [RFC V2 1/6] PCI: initial commit (draft)   Sascha Hauer
  • [RFC V2 2/6] MIPS: add file gt64120.h from linux 2.6.39   Antony Pavlov
  • [RFC V2 3/6] MIPS: add PCI support for GT64120-based malta   Antony Pavlov
  • [RFC V2 4/6] PCI: add draft lspci command   Antony Pavlov
  • [RFC V2 5/6] net: add Realtek 8139 Ethernet controller support   Antony Pavlov
    • [RFC V2 5/6] net: add Realtek 8139 Ethernet controller support   Sascha Hauer
  • [RFC V2 6/6] net: add DEC 21143 (tulip) Ethernet controller support   Antony Pavlov
  • [RFC V2 0/6] barebox PCI support   Sascha Hauer
• [PATCH] ENV: remove kernelimage_type from env/config   Jan Weitzel
  • [PATCH] ENV: remove kernelimage_type from env/config   Sascha Hauer
• [PATCH] imx_nand_load_image: change all users to use barebox_image_size   Michael Grzeschik
  • [PATCH] imx_nand_load_image: change all users to use barebox_image_size   Sascha Hauer
• Shall 'bmp' uncompress automagically?   Wolfram Sang
  • Shall 'bmp' uncompress automagically?   Jean-Christophe PLAGNIOL-VILLARD
    • Shall 'bmp' uncompress automagically?   Wolfram Sang
      • Shall 'bmp' uncompress automagically?   Jean-Christophe PLAGNIOL-VILLARD
      • Shall 'bmp' uncompress automagically?   Wolfram Sang
• [PATCH] drivers/mtd: improve docg3 write speed   Robert Jarzmik
  • [PATCH] drivers/mtd: improve docg3 write speed   Sascha Hauer
• [PATCH 00/14] Atmel ref board update   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/14] macb: fix mmu support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 01/14] macb: fix mmu support   Sascha Hauer
    • [PATCH 01/14] macb: fix mmu support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/14] at91sam9263ek: add runtime nor detection   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/14] at91sam9263ek: add leds support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/14] at91sam9263ek: add dfu and usb serial support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/14] at91sam9263ek: update defconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/14] at91sam9261ek/9g10ek: update partition layout   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/14] at91sam9261ek/9g10ek: add leds support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/14] at91sam9261ek/9g10ek: add dfu and usb serial support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/14] at91sam9261ek/9g10ek: add gpio Keyboard support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/14] at91sam9261ek/9g10ek: update board supprt   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/14] at91sam9m10g45ek: update partition layout   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 12/14] at91sam9m10g45ek: add leds support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 13/14] at91sam9m10g45ek: update defconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 14/14] at91sam9260ek/9g20ek: update defconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/14] Atmel Reference Board Update   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 00/14] Atmel Reference Board Update   Sascha Hauer
• serial S3: fix local structure malloc   Juergen Beisert
  • serial S3: fix local structure malloc   Sascha Hauer
• [RFC] ARM/serial: add a DCC based console driver   Juergen Beisert
  • [RFC] ARM/serial: add a DCC based console driver   Sascha Hauer
    • [RFC] ARM/serial: add a DCC based console driver   Juergen Beisert
  • [RFC] ARM/serial: add a DCC based console driver   Juergen Beisert
• New Terms and Conditions   pbrown at contracts4commerce.com
• [PATCH 1/1] at91: set dhcp vendor id on Atmel Reference board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] defaultenv: add bootp support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/2] defaultenv: add dhcp-barebox option   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pcm038: increase size of barebox partition   Teresa Gámez
  • [PATCH] pcm038: increase size of barebox partition   Sascha Hauer
• [PATCH 1/5] pcm049: Update RAM timings   Teresa Gámez
  • [PATCH 2/5] pcm049: Update muxing   Teresa Gámez
  • [PATCH 4/5] devices-gpmc-nand: Add OMAP4 gpmc nand timings   Teresa Gámez
  • [PATCH 1/5] pcm049: Update RAM timings   Sascha Hauer
• [PATCH 3/5] pcm049: Update GPMC net conf   Teresa Gámez
• [PATCH 5/5] pcm049_xload_defconfig: activate Thumb-2 support   Teresa Gámez
• [PATCH 1/2] i.MX51: add support for UART3   Alexander Shiyan
  • [PATCH 1/2] i.MX51: add support for UART3   Sascha Hauer
• [PATCH 2/2] PCM038: add support for MMC   Alexander Shiyan
  • [PATCH 2/2] PCM038: add support for MMC   Sascha Hauer
    • Re[2]: [PATCH 2/2] PCM038: add support for MMC   Alexander Shiyan
• [PATCH] i.MX51: Remove GPIO2.6 setup from lowlevel_init   Alexander Shiyan
  • [PATCH] i.MX51: Remove GPIO2.6 setup from lowlevel_init   Sascha Hauer
• [PATCH 1/2] i.MX27: Define SDHC base address   Alexander Shiyan
  • [PATCH 1/2] i.MX27: Define SDHC base address   Sascha Hauer
• [PATCH 2/2] i.MX27: Add support for SDHC1   Alexander Shiyan
  • [PATCH 2/2] i.MX27: Add support for SDHC1   Sascha Hauer
    • [PATCH 1/3] i.MX27: Define base address for SDHC1,2,3   Alexander Shiyan
      • [PATCH 1/3] i.MX27: Define base address for SDHC1,2,3   Sascha Hauer
    • [PATCH 2/3] i.MX27: Add support for SDHC1,3   Alexander Shiyan
    • [PATCH 3/3] i.MX51: Fix name definition for SSI3   Alexander Shiyan
• [PATCH] i.MX27: Use resigter name in imx27_add_fb   Alexander Shiyan
  • [PATCH] i.MX27: Use resigter name in imx27_add_fb   Sascha Hauer
• [PATCH 1/3] Use register names for MC13892   Alexander Shiyan
  • [PATCH 1/3] Use register names for MC13892   Sascha Hauer
• [PATCH 2/3] Use mx53-related functions for i.MX53 boards   Alexander Shiyan
  • [PATCH 2/3] Use mx53-related functions for i.MX53 boards   Sascha Hauer
• [PATCH 3/3] i.MX51: Fix NANDF_RDY_INT pin definition   Alexander Shiyan
• [PATCH] Remove duplicate voltage setup for imx-esdhc   Alexander Shiyan
  • [PATCH] Remove duplicate voltage setup for imx-esdhc   Sascha Hauer
• [PATCH] Add support for Karo TX51 module   Christian Kapeler
  • [PATCH] Add support for Karo TX51 module   Sascha Hauer
• [PATCH] automount support   Sascha Hauer
  • [PATCH 1/8] fs: change get_fs_device_by_path prototype   Sascha Hauer
  • [PATCH 2/8] fs: drop struct mtab_entry   Sascha Hauer
  • [PATCH 3/8] Add automount support   Sascha Hauer
  • [PATCH 4/8] fs open: pass error from stat   Sascha Hauer
  • [PATCH 7/8] usb command: by default scan only once for USB devices   Sascha Hauer
• [PATCH 5/8] hush source: expand $PATH   Sascha Hauer
• [PATCH 6/8] FAT: Fix error path   Sascha Hauer
• [PATCH 8/8] partition command: optionally do not automatically prepend the device name   Sascha Hauer
• [PATCH] defenv: remove bogus defaultenv from defconfigs   Sascha Hauer
• flash_header for mx51   Alexander Shiyan
  • flash_header for mx51   Sascha Hauer
• kconfig-frontends: a packaging of the kconfig language   Yann E. MORIN
• [PATCH 0/3] miidev: improve phy initialization   Wolfram Sang
  • [PATCH 1/3] net: miidev: check for errors when accessing bus in restart_aneg   Wolfram Sang
  • [PATCH 2/3] net: miidev: Refactor timeout for aneg   Wolfram Sang
  • [PATCH 3/3] net: miidev: properly check for MII reset   Wolfram Sang
  • [PATCH 0/3] miidev: improve phy initialization   Sascha Hauer
• barebox-2012.03.0 imx_get_i2cclk   guenter.gebhardt at rafi.de
  • barebox-2012.03.0 imx_get_i2cclk   Sascha Hauer
• [PATCH V2 0/2] Add support for Karo TX51 module   Christian Kapeller
  • [PATCH V2 1/2] update mx51 pad definition for Karo TX51 board   Christian Kapeller
  • [PATCH V2 2/2] Add board support for Karo TX51 i.mx51 SODIMM module.   Christian Kapeller
  • [PATCH V2 0/2] Add support for Karo TX51 module   Sascha Hauer
• [PATCH 1/2] mtd: core: Fix compilation warning.   Marek Belisko
  • [PATCH 2/2] pxa27x_udc: Fix compilation warning.   Marek Belisko
    • [PATCH 2/2] pxa27x_udc: Fix compilation warning.   Sascha Hauer
  • [PATCH 1/2] mtd: core: Fix compilation warning.   Sascha Hauer
    • [PATCH 1/2] mtd: core: Fix compilation warning.   Belisko Marek
• i.MX21 USB OTG   Derald D. Woods
  • i.MX21 USB OTG   Sascha Hauer
  • i.MX21 USB OTG   Martin Fuzzey
    • i.MX21 USB OTG   Derald D. Woods
• Network Issue with Mini2440   Kamel BOUHARA
  • Network Issue with Mini2440   Juergen Beisert
    • Fwd: Network Issue with Mini2440   Kamel BOUHARA
      • Fwd: Network Issue with Mini2440   Juergen Beisert
    • Network Issue with Mini2440   Kamel BOUHARA
      • Network Issue with Mini2440   Juergen Beisert
      • Network Issue with Mini2440   Jean-Christophe PLAGNIOL-VILLARD
• fix i.MX flash header copy sizes   Sascha Hauer
  • [PATCH 2/2] ARM i.MX flash header: Fix barebox image sizes   Sascha Hauer
• [PATCH 1/2] ARM linker script: Fix barebox_image_size   Sascha Hauer
• ARM i.MX51: lowlevel code work   Sascha Hauer
  • [PATCH 1/3] ARM i.MX51 clk: select uart clk parent based on hardware setting   Sascha Hauer
  • [PATCH 2/3] ARM i.MX51 babbage: move lowlevel setup after power init   Sascha Hauer
  • [PATCH 3/3] ARM i.MX51 lowlevel: setup full cpu speed unconditionally   Sascha Hauer
• I'm away   Sascha Hauer
• [PATCH] ARM i.MX51 babbage: Remove clock raise from power_init.   Alexander Shiyan
• [PATCH] ARM i.MX51 eukrea_cpuimx51: Remove unused include   Alexander Shiyan
• [PATCH 1/6] Rename definitions for ULPI registers   Alexander Shiyan
  • [PATCH 5/6] Completely migrate option ISP1504 to ULPI   Alexander Shiyan
• [PATCH 2/6] Add ULPI detection function.   Alexander Shiyan
• [PATCH 3/6] Move set_vbus_power code to ULPI driver   Alexander Shiyan
• [PATCH 4/6] Rename function ulpi_init to ulpi_detect   Alexander Shiyan
• [PATCH 6/6] Cosmetic change name ISP1504 -> ISP150x   Alexander Shiyan
• [PATCH] i.MX27: Added helper for setup chipselect control register   Alexander Shiyan
• [PATCH] i.MX27: Added definition for 600 mHz PLL setup.   Alexander Shiyan
  • [PATCH] i.MX27: Added definition for 600 mHz PLL setup.   Sascha Hauer
• [PATCH] Select POLLER option for fsl_udc   Alexander Shiyan
• [PATCH] i.MX27: Export boot source to magic variables   Alexander Shiyan
• [PATCH] Add barebox.map and compressed default_env to distclean   Alexander Shiyan
• [PATCH] imx53: undefined reference to `imx_get_i2cclk'   guenter.gebhardt at rafi.de
  • [PATCH] imx53: undefined reference to `imx_get_i2cclk'   Sascha Hauer
• imx53 internal boot from NAND   guenter.gebhardt at rafi.de
  • AW: imx53 internal boot from NAND   Matthias Fend
    • Antwort: AW: imx53 internal boot from NAND   guenter.gebhardt at rafi.de
      • AW: Antwort: AW: imx53 internal boot from NAND   Matthias Fend
  • imx53 internal boot from NAND   Robert Schwebel
  • imx53 internal boot from NAND   christian.buettner at rafi.de
• [PATCH 0/4] mxs: iomux configuration improvements   esben.haabendal at gmail.com
  • [PATCH 4/4] mxs: Add remaining i.MX28 iomux configurations   esben.haabendal at gmail.com
• [PATCH 1/4] mxs: Fix support for BITKEEPER() macro   esben.haabendal at gmail.com
• [PATCH 2/4] mxs: Fix i.MX28 PWM3 iomux configuration   esben.haabendal at gmail.com
• [PATCH 3/4] mxs: Cleanup use of blank lines in i.MX28 iomux configurations   esben.haabendal at gmail.com
• [PATCH 0/2] mx28-evk LCD support   esben.haabendal at gmail.com
• [PATCH 1/2] mx28-evk: Add LCD support   esben.haabendal at gmail.com
• [PATCH 2/2] mx28-evk: Enable LCD support and bmp command   esben.haabendal at gmail.com
• Create NAND Partition through barebox   christian.buettner at rafi.de
  • Create NAND Partition through barebox   Eric Bénard
    • Antwort: Re: Create NAND Partition through barebox   christian.buettner at rafi.de
      • Create NAND Partition through barebox   Eric Bénard
      • Create NAND Partition through barebox   Alexander Aring
      • Antwort: Re: Re: Create NAND Partition through barebox   christian.buettner at rafi.de
      • Create NAND Partition through barebox   Eric Bénard
      • Create NAND Partition through barebox   Franck Jullien
      • Antwort: Re: Create NAND Partition through barebox   christian.buettner at rafi.de
  • Create NAND Partition through barebox   Alexander Aring
    • Antwort: Re: Create NAND Partition through barebox   christian.buettner at rafi.de
• filling string variables in script   Martino Ruppi
• [PATCH 0/8] Network update DHCP/BOOTP   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/8] net: dhcp: reset env variable before do a dhcp request   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/8] net: dhcp: add support of tftp name server   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/8] net: dhcp: add support of tftp server ip or Etherboot file (option 150)   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 3/8] net: dhcp: add support of tftp server ip or Etherboot file (option 150)   Sascha Hauer
      • [PATCH 3/8] net: dhcp: add support of tftp server ip or Etherboot file (option 150)   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/8] net: dhcp: allow to set transmitted client id   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 5/8] net: dhcp: allow to set transmitted client uuid   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 6/8] net: dhcp: allow to set transmitted user class   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 7/8] net: dns: export resolved ip to var resolved_ip   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 7/8] net: dns: export resolved ip to var resolved_ip   Sascha Hauer
      • [PATCH 7/8] net: dns: export resolved ip to var resolved_ip   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 8/8] defaultenv: add support of etherboot_file   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 7/8 v2] net: env: getenv_ip use resolv   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/6 for this release]   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/6] cfi_flash: fix missing resource update when probing the cfi size   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/6] net: at91_ether re-implement against new at91rm9200 api   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/6] at91rm9200ek: enable at91_ether and net support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/6] at91: set ip mode to dhcp-barebox   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 5/6] at91rm9200ek: update config for network   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 6/6] at91rm9200ek: adjust kernel partition to be able to flash mainline kernel   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/9] AT91 update rm9200ek support and add sam9x5 support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/9] at91rm9200ek: add ohci support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/9] at91rm9200ek: add leds support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 3/9] at91rm9200ek: add usb serial support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 4/9] at91rm9200ek: update defconfig   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 5/9] atmel_nand: add on_flash_btt option to enable bbt option   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 6/9] ARM: at91: add sam9x5 series CPU definition and cpu_is_xxx macro   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 7/9] ARM: at91: allow to pass the interface id to at91_add_device_eth   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 8/9] ARM: at91/pio: add new PIO3 features   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 9/9] AT91: at91sam9x5: add chip and board file   Jean-Christophe PLAGNIOL-VILLARD
• OMAP4 Panda - MMC access broken   Anand Gadiyar

Last message date: Fri Mar 30 12:34:59 EDT 2012
Archived on: Fri Mar 30 12:35:25 EDT 2012

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...