[PATCH V2 0/2] Add support for Karo TX51 module

[Christian Kapeller]

This patch introduces board support for the Karo TX51 i.mx51 sodimm module.

Supported features:
 - nand
 - ethernet
 - mmc0, mmc1 (on stk5v3 development board)
 - led (on stk5v3 development board)

What changed from patch V1:
 - fixed ethernet initialization
 - added mmc1 support
 - update defconfig to include commands for supported devices
 - updated env:
    - don't add 'tx51_base' parameter to kernel cmdline
    - update kernel image name to zImage_tx51, which comes with Karo BSP

What doesn't work:
 - fec mac is read in reverse byte order.

Kind regards,
Christian Kapeller


Christian Kapeller (2):
  update mx51 pad definition for Karo TX51 board
  Add board support for Karo TX51 i.mx51 SODIMM module.

 arch/arm/Makefile                           |    1 +
 arch/arm/boards/karo-tx51/Makefile          |    2 +
 arch/arm/boards/karo-tx51/config.h          |   21 ++
 arch/arm/boards/karo-tx51/env/config        |   43 ++++
 arch/arm/boards/karo-tx51/flash_header.c    |   58 ++++++
 arch/arm/boards/karo-tx51/tx51.c            |  290 +++++++++++++++++++++++++++
 arch/arm/boards/karo-tx51/tx51.dox          |   50 +++++
 arch/arm/configs/tx51stk5_defconfig         |  148 ++++++++++++++
 arch/arm/mach-imx/Kconfig                   |    8 +
 arch/arm/mach-imx/include/mach/iomux-mx51.h |   43 ++++-
 10 files changed, 659 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/boards/karo-tx51/Makefile
 create mode 100644 arch/arm/boards/karo-tx51/config.h
 create mode 100644 arch/arm/boards/karo-tx51/env/config
 create mode 100644 arch/arm/boards/karo-tx51/flash_header.c
 create mode 100644 arch/arm/boards/karo-tx51/tx51.c
 create mode 100644 arch/arm/boards/karo-tx51/tx51.dox
 create mode 100644 arch/arm/configs/tx51stk5_defconfig

-- 
1.7.5.4