[PATCH] Add support for Karo TX51 module

[Christian Kapeler]

Hi,

the attached patches introduce basic barebox support for the Karo 
SO-DIMM TX51 SOC modules.
Note, that the code is not tested with the Starterkit development board 
as base,
but on our own custom board.

Currently the board boots, supports nand, and mmc. Ethernet support is 
currently only working,
when barebox is chainloaded from Redboot shipped with the modules.

Kind regards,
Christian Kapeller

-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0001-Update-mx51-pad-definitions.patch
Type: text/x-patch
Size: 12314 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/barebox/attachments/20120318/4ac59e09/attachment-0002.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0002-Add-basic-board-support-for-Karo-TX51-module.patch
Type: text/x-patch
Size: 21702 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/barebox/attachments/20120318/4ac59e09/attachment-0003.bin>