[PATCH] drivers/mtd: improve docg3 write speed

[Sascha Hauer]

On Sun, Mar 11, 2012 at 12:07:06PM +0100, Robert Jarzmik wrote:
> When programming or erasing a page, don't wait
> systematically for 3s, but finish the operation as soon as
> the hardware has finished, and timeout if 3 seconds have
> passed.
> 
> Signed-off-by: Robert Jarzmik <robert.jarzmik at free.fr>

Applied, thanks

Sascha

> ---
>  drivers/mtd/devices/docg3.c |    5 +++--
>  1 files changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
> index 88d707c..7a40908 100644
> --- a/drivers/mtd/devices/docg3.c
> +++ b/drivers/mtd/devices/docg3.c
> @@ -21,6 +21,7 @@
>  #include <driver.h>
>  #include <errno.h>
>  #include <malloc.h>
> +#include <clock.h>
>  #include <io.h>
>  #include <linux/kernel.h>
>  #include <linux/mtd/mtd.h>
> @@ -780,9 +781,9 @@ static int doc_get_op_status(struct docg3 *docg3)
>  static int doc_write_erase_wait_status(struct docg3 *docg3)
>  {
>  	int status, ret = 0;
> +	uint64_t start = get_time_ns();
>  
> -	if (!doc_is_ready(docg3))
> -		mdelay(3000);
> +	while (!is_timeout(start, 3000 * MSECOND) && !doc_is_ready(docg3));
>  	if (!doc_is_ready(docg3)) {
>  		doc_dbg("Timeout reached and the chip is still not ready\n");
>  		ret = -EAGAIN;
> -- 
> 1.7.5.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |