Fwd: Network Issue with Mini2440

[Juergen Beisert]

Hi Kamel,

Kamel BOUHARA wrote:
> Ok, it light me on the way that my board don't use an eeprom to set the FEC
> address so I probably have to fix that somewhere ...maybe a macro #define
> NO_EEPROM or something like that ??

You do not need an EEPROM for the MAC address. Setting a random one should do 
the trick. The Mini6410 also has no EEPROM. The message is a little bit 
confusing. It only shows the already set MAC address in the DM9000.

> Can you, please, show me the *md -s /dev/phy0* command output from you
> mini6410.

mini6410:/ md -s /dev/phy0
00000000: 78693100 b8a00181 45e101e1 00000003                .1ix.......E....
00000010: 00000000 00000000 00000000 00000000                ................
00000020: 80180414 00007800 00000080 00000000                .....x..........
00000030: 000004e1 00000000 00000000 00000000                ................

Regards,
Juergen

-- 
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | http://www.pengutronix.de/  |