[RFC V2 1/6] PCI: initial commit (draft)
Antony Pavlov
antonynpavlov at gmail.com
Thu Mar 8 14:50:27 EST 2012
used shorten version of linux-2.6.39 pci_ids.h
Signed-off-by: Antony Pavlov <antonynpavlov at gmail.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
drivers/Makefile | 1 +
drivers/pci/Kconfig | 12 +
drivers/pci/Makefile | 8 +
drivers/pci/bus.c | 103 ++++++
drivers/pci/pci.c | 347 +++++++++++++++++++
include/linux/mod_devicetable.h | 24 ++
include/linux/pci.h | 270 +++++++++++++++
include/linux/pci_ids.h | 136 ++++++++
include/linux/pci_regs.h | 698 +++++++++++++++++++++++++++++++++++++++
9 files changed, 1599 insertions(+), 0 deletions(-)
create mode 100644 drivers/pci/Kconfig
create mode 100644 drivers/pci/Makefile
create mode 100644 drivers/pci/bus.c
create mode 100644 drivers/pci/pci.c
create mode 100644 include/linux/mod_devicetable.h
create mode 100644 include/linux/pci.h
create mode 100644 include/linux/pci_ids.h
create mode 100644 include/linux/pci_regs.h
diff --git a/drivers/Makefile b/drivers/Makefile
index 3aefc12..f3e61d4 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_LED) += led/
obj-y += eeprom/
obj-$(CONFIG_PWM) += pwm/
obj-y += input/
+obj-$(CONFIG_PCI) += pci/
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
new file mode 100644
index 0000000..88b8dfb
--- /dev/null
+++ b/drivers/pci/Kconfig
@@ -0,0 +1,12 @@
+#
+# PCI configuration
+#
+config PCI_DEBUG
+ bool "PCI Debugging"
+ depends on PCI
+ help
+ Say Y here if you want the PCI core to produce a bunch of debug
+ messages to the system log. Select this if you are having a
+ problem with PCI support and want to see more of what is going on.
+
+ When in doubt, say N.
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
new file mode 100644
index 0000000..c7d43c3
--- /dev/null
+++ b/drivers/pci/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the PCI bus specific drivers.
+#
+obj-y += pci.o bus.o
+
+ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
+
+CPPFLAGS += $(ccflags-y)
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
new file mode 100644
index 0000000..ca1a8d5
--- /dev/null
+++ b/drivers/pci/bus.c
@@ -0,0 +1,103 @@
+#include <common.h>
+#include <driver.h>
+#include <linux/pci.h>
+
+/**
+ * pci_match_one_device - Tell if a PCI device structure has a matching
+ * PCI device id structure
+ * @id: single PCI device id structure to match
+ * @dev: the PCI device structure to match against
+ *
+ * Returns the matching pci_device_id structure or %NULL if there is no match.
+ */
+static inline const struct pci_device_id *
+pci_match_one_device(const struct pci_device_id *id, const struct pci_dev *dev)
+{
+ if ((id->vendor == PCI_ANY_ID || id->vendor == dev->vendor) &&
+ (id->device == PCI_ANY_ID || id->device == dev->device) &&
+ (id->subvendor == PCI_ANY_ID || id->subvendor == dev->subsystem_vendor) &&
+ (id->subdevice == PCI_ANY_ID || id->subdevice == dev->subsystem_device) &&
+ !((id->class ^ dev->class) & id->class_mask))
+ return id;
+ return NULL;
+}
+
+static int pci_match(struct device_d *dev, struct driver_d *drv)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct pci_driver *pdrv = to_pci_driver(drv);
+ struct pci_device_id *id;
+
+ for (id = (struct pci_device_id*)pdrv->id_table; id->vendor; id++)
+ if (pci_match_one_device(id, pdev)) {
+ dev->priv = id;
+ return 0;
+ }
+
+ return -1;
+}
+
+static int pci_probe(struct device_d *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct pci_driver *pdrv = to_pci_driver(dev->driver);
+
+ return pdrv->probe(pdev, dev->priv);
+}
+
+static void pci_remove(struct device_d *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct pci_driver *pdrv = to_pci_driver(dev->driver);
+
+ pdrv->remove(pdev);
+}
+
+struct bus_type pci_bus = {
+ .name = "pci",
+ .match = pci_match,
+ .probe = pci_probe,
+ .remove = pci_remove,
+};
+
+int pci_register_driver(struct pci_driver *pdrv)
+{
+ struct driver_d *drv = &pdrv->driver;
+
+ if (!pdrv->id_table)
+ return -EIO;
+
+ strcpy(drv->name, pdrv->name);
+ drv->bus = &pci_bus;
+
+ return register_driver(drv);
+}
+
+int pci_register_device(struct pci_dev *pdev)
+{
+ char str[6];
+ struct device_d *dev = &pdev->dev;
+ int ret;
+
+ strcpy(dev->name, "pci");
+ dev->bus = &pci_bus;
+ dev->id = -1;
+
+ ret = register_device(dev);
+
+ if (ret)
+ return ret;
+
+ sprintf(str, "%02x", pdev->devfn);
+ dev_add_param_fixed(dev, "devfn", str);
+ sprintf(str, "%04x", (pdev->class >> 8) & 0xffff);
+ dev_add_param_fixed(dev, "class", str);
+ sprintf(str, "%04x", pdev->vendor);
+ dev_add_param_fixed(dev, "vendor", str);
+ sprintf(str, "%04x", pdev->device);
+ dev_add_param_fixed(dev, "device", str);
+ sprintf(str, "%04x", pdev->revision);
+ dev_add_param_fixed(dev, "revision", str);
+
+ return 0;
+}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
new file mode 100644
index 0000000..d1df399
--- /dev/null
+++ b/drivers/pci/pci.c
@@ -0,0 +1,347 @@
+#include <common.h>
+#include <init.h>
+#include <linux/pci.h>
+
+#include <command.h>
+#include <debug_ll.h>
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+unsigned int pci_scan_bus(struct pci_bus *bus);
+
+static struct pci_controller *hose_head, **hose_tail = &hose_head;
+
+struct pci_bus *pci_root;
+struct pci_dev *pci_devices = NULL;
+static struct pci_dev **pci_last_dev_p = &pci_devices;
+
+static struct pci_bus * pci_alloc_bus(void)
+{
+ struct pci_bus *b;
+
+ b = kzalloc(sizeof(*b), GFP_KERNEL);
+ if (b) {
+ INIT_LIST_HEAD(&b->node);
+ INIT_LIST_HEAD(&b->children);
+ INIT_LIST_HEAD(&b->devices);
+ INIT_LIST_HEAD(&b->slots);
+ INIT_LIST_HEAD(&b->resources);
+ //b->max_bus_speed = PCI_SPEED_UNKNOWN;
+ //b->cur_bus_speed = PCI_SPEED_UNKNOWN;
+ }
+ return b;
+}
+
+void register_pci_controller(struct pci_controller *hose)
+{
+ struct pci_bus *bus;
+
+ printf("PCI: register_pci_controller() \n");
+
+ *hose_tail = hose;
+ hose_tail = &hose->next;
+
+ bus = pci_alloc_bus();
+ hose->bus = bus;
+ bus->ops = hose->pci_ops;
+ bus->resource[0] = hose->mem_resource;
+ bus->resource[1] = hose->io_resource;
+
+ pci_scan_bus(bus);
+
+ pci_root = bus;
+
+ return;
+}
+
+int
+pci_bus_read_config_byte(struct pci_bus *bus, unsigned int devfn, u8 where, u8 *val)
+{
+ u32 data;
+ int status;
+
+ status = bus->ops->read(bus, devfn, where & 0xfc, 4, &data);
+ *val = (u8) (data >> ((where & 3) << 3));
+ return status;
+}
+
+int
+pci_bus_read_config_word(struct pci_bus *bus, unsigned int devfn, u8 where, u16 *val)
+{
+ u32 data;
+ int status;
+
+ status = bus->ops->read(bus, devfn, where & 0xfc, 4, &data);
+ *val = (u16) (data >> ((where & 3) << 3));
+ return status;
+}
+
+int
+pci_bus_read_config_dword(struct pci_bus *bus, unsigned int devfn, u8 where, u32 *val)
+{
+ return bus->ops->read(bus, devfn, where, 4, val);
+}
+
+int
+pci_bus_write_config_byte(struct pci_bus *bus, unsigned int devfn, u8 where, u8 val)
+{
+ u32 data;
+ int status;
+
+ bus->ops->read(bus, devfn, where & 0xfc, 4, &data);
+ data = (data & ~(0xff << ((where & 3) << 3))) | (val << ((where & 3) << 3));
+ status = bus->ops->write(bus, devfn, where & 0xfc, 4, data);
+
+ return status;
+}
+
+int
+pci_bus_write_config_word(struct pci_bus *bus, unsigned int devfn, u8 where, u16 val)
+{
+ u32 data;
+ int status;
+
+ bus->ops->read(bus, devfn, where & 0xfc, 4, &data);
+ data = (data & ~(0xffff << ((where & 3) << 3))) | (val << ((where & 3) << 3));
+ status = bus->ops->write(bus, devfn, where & 0xfc, 4, data);
+
+ return status;
+}
+
+int
+pci_bus_write_config_dword(struct pci_bus *bus, unsigned int devfn, u8 where, u32 val)
+{
+ return bus->ops->write(bus, devfn, where, 4, val);
+}
+
+int
+pci_read_config_byte(struct pci_dev *dev, u8 where, u8 *val)
+{
+ return pci_bus_read_config_byte(dev->bus, dev->devfn, where, val);
+}
+
+int
+pci_read_config_word(struct pci_dev *dev, u8 where, u16 *val)
+{
+ return pci_bus_read_config_word(dev->bus, dev->devfn, where, val);
+}
+
+int
+pci_read_config_dword(struct pci_dev *dev, u8 where, u32 *val)
+{
+ return pci_bus_read_config_dword(dev->bus, dev->devfn, where, val);
+}
+
+int
+pci_write_config_byte(struct pci_dev *dev, u8 where, u8 val)
+{
+ return pci_bus_write_config_byte(dev->bus, dev->devfn, where, val);
+}
+
+int
+pci_write_config_word(struct pci_dev *dev, u8 where, u16 val)
+{
+ return pci_bus_write_config_word(dev->bus, dev->devfn, where, val);
+}
+
+int
+pci_write_config_dword(struct pci_dev *dev, u8 where, u32 val)
+{
+ return pci_bus_write_config_dword(dev->bus, dev->devfn, where, val);
+}
+
+struct pci_dev *alloc_pci_dev(void)
+{
+ struct pci_dev *dev;
+
+ dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL);
+ if (!dev)
+ return NULL;
+
+ INIT_LIST_HEAD(&dev->bus_list);
+
+ return dev;
+}
+
+unsigned int pci_scan_bus(struct pci_bus *bus)
+{
+ unsigned int devfn, l, max, class;
+ unsigned char cmd, irq, tmp, hdr_type, is_multi = 0;
+ struct pci_dev *dev, **bus_last;
+ struct pci_bus *child;
+ resource_size_t last_mem;
+ resource_size_t last_io;
+
+ //last_mem = bus->ops->res_start(bus,
+ last_mem = bus->resource[0]->start;
+ last_io = bus->resource[1]->start;
+ // FIXME
+ // add 0x1000: skip malta serial port
+ last_io += 0x1000;
+
+ DBG("pci_scan_bus for bus %d\n", bus->number);
+ DBG(" last_io = 0x%08x, last_mem = 0x%08x\n", last_io, last_mem);
+ bus_last = &bus->devices;
+ max = bus->secondary;
+
+ for (devfn = 0; devfn < 0xff; ++devfn) {
+ if (PCI_FUNC(devfn) && !is_multi) {
+ /* not a multi-function device */
+ continue;
+ }
+ if (pci_bus_read_config_byte(bus, devfn, PCI_HEADER_TYPE, &hdr_type))
+ continue;
+ if (!PCI_FUNC(devfn))
+ is_multi = hdr_type & 0x80;
+
+ if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, &l) ||
+ /* some broken boards return 0 if a slot is empty: */
+ l == 0xffffffff || l == 0x00000000 || l == 0x0000ffff || l == 0xffff0000)
+ continue;
+
+ dev = alloc_pci_dev();
+ if (!dev)
+ return 0;
+
+ dev->bus = bus;
+ dev->devfn = devfn;
+ dev->vendor = l & 0xffff;
+ dev->device = (l >> 16) & 0xffff;
+
+ /* non-destructively determine if device can be a master: */
+ pci_read_config_byte(dev, PCI_COMMAND, &cmd);
+ pci_write_config_byte(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER);
+ pci_read_config_byte(dev, PCI_COMMAND, &tmp);
+ //dev->master = ((tmp & PCI_COMMAND_MASTER) != 0);
+ pci_write_config_byte(dev, PCI_COMMAND, cmd);
+
+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
+ dev->revision = class & 0xff;
+ class >>= 8; /* upper 3 bytes */
+ dev->class = class;
+ class >>= 8;
+ dev->hdr_type = hdr_type;
+
+ DBG("PCI: class = %08x, hdr_type = %08x\n", class, hdr_type);
+
+ switch (hdr_type & 0x7f) { /* header type */
+ case PCI_HEADER_TYPE_NORMAL: /* standard header */
+ if (class == PCI_CLASS_BRIDGE_PCI)
+ goto bad;
+ /*
+ * If the card generates interrupts, read IRQ number
+ * (some architectures change it during pcibios_fixup())
+ */
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq);
+ if (irq)
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
+ dev->irq = irq;
+ /*
+ * read base address registers, again pcibios_fixup() can
+ * tweak these
+ */
+ // pci_read_bases(dev, 6);
+ pci_read_config_dword(dev, PCI_ROM_ADDRESS, &l);
+ dev->rom_address = (l == 0xffffffff) ? 0 : l;
+ break;
+ #if 0
+ case PCI_HEADER_TYPE_BRIDGE: /* bridge header */
+ if (class != PCI_CLASS_BRIDGE_PCI)
+ goto bad;
+ pci_read_bases(dev, 2);
+ pcibios_read_config_dword(bus->number, devfn, PCI_ROM_ADDRESS1, &l);
+ dev->rom_address = (l == 0xffffffff) ? 0 : l;
+ break;
+ case PCI_HEADER_TYPE_CARDBUS: /* CardBus bridge header */
+ if (class != PCI_CLASS_BRIDGE_CARDBUS)
+ goto bad;
+ pci_read_bases(dev, 1);
+ break;
+#endif
+ default: /* unknown header */
+ bad:
+ printk(KERN_ERR "PCI: %02x:%02x [%04x/%04x/%06x] has unknown header type %02x, ignoring.\n",
+ bus->number, dev->devfn, dev->vendor, dev->device, class, hdr_type);
+ continue;
+ }
+
+ DBG("PCI: %02x:%02x [%04x/%04x]\n", bus->number, dev->devfn, dev->vendor, dev->device);
+
+ list_add_tail(&dev->bus_list, &bus->devices);
+ pci_register_device(dev);
+
+ if (class == PCI_CLASS_BRIDGE_HOST) {
+ DBG("PCI: skip pci host bridge\n");
+ continue;
+ }
+
+ {
+ int bar;
+ u32 old_bar, mask;
+ int size;
+
+ for (bar = 0; bar < 6; bar++) {
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, &old_bar);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, 0xfffffffe);
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, &mask);
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, old_bar);
+
+ if (mask == 0 || mask == 0xffffffff) {
+ //DBG(" PCI: pbar%d set bad mask\n", bar);
+ continue;
+ }
+
+ if (mask & 0x01) { /* IO */
+ size = -(mask & 0xfffffffe);
+ DBG(" PCI: pbar%d: mask=%08x io %d bytes\n", bar, mask, size);
+ DBG(" mapped to 0x%08x (0x%08x)\n", last_io, bus->ops->res_start(bus, last_io));
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, last_io);
+ last_io += size;
+
+ } else { /* MEM */
+ size = -(mask & 0xfffffff0);
+ DBG(" PCI: pbar%d: mask=%08x memory %d bytes\n", bar, mask, size);
+ DBG(" mapped to 0x%08x (0x%08x)\n", last_mem, bus->ops->res_start(bus, last_mem));
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + bar * 4, last_mem);
+ last_mem += size;
+ }
+ }
+ }
+ }
+
+ /*
+ * After performing arch-dependent fixup of the bus, look behind
+ * all PCI-to-PCI bridges on this bus.
+ */
+ //pcibios_fixup_bus(bus);
+
+ /*
+ * We've scanned the bus and so we know all about what's on
+ * the other side of any bridges that may be on this bus plus
+ * any devices.
+ *
+ * Return how far we've got finding sub-buses.
+ */
+ DBG("PCI: pci_scan_bus returning with max=%02x\n", max);
+ return max;
+}
+
+static int pci_init(void)
+{
+ pcibios_init();
+
+ if (!pci_present()) {
+ printf("PCI: No PCI bus detected\n");
+ return 0;
+ }
+
+ /* give BIOS a chance to apply platform specific fixes: */
+ //pcibios_fixup();
+
+ return 0;
+}
+postcore_initcall(pci_init);
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
new file mode 100644
index 0000000..911e461
--- /dev/null
+++ b/include/linux/mod_devicetable.h
@@ -0,0 +1,24 @@
+/*
+ * Device tables which are exported to userspace via
+ * scripts/mod/file2alias.c. You must keep that file in sync with this
+ * header.
+ */
+
+#ifndef LINUX_MOD_DEVICETABLE_H
+#define LINUX_MOD_DEVICETABLE_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+typedef unsigned long kernel_ulong_t;
+#endif
+
+#define PCI_ANY_ID (~0)
+
+struct pci_device_id {
+ __u32 vendor, device; /* Vendor and device ID or PCI_ANY_ID*/
+ __u32 subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
+ __u32 class, class_mask; /* (class,subclass,prog-if) triplet */
+ kernel_ulong_t driver_data; /* Data private to the driver */
+};
+
+#endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
new file mode 100644
index 0000000..e3d50d6
--- /dev/null
+++ b/include/linux/pci.h
@@ -0,0 +1,270 @@
+/*
+ * pci.h
+ *
+ * PCI defines and function prototypes
+ * Copyright 1994, Drew Eckhardt
+ * Copyright 1997--1999 Martin Mares <mj at ucw.cz>
+ *
+ * For more information, please consult the following manuals (look at
+ * http://www.pcisig.com/ for how to get them):
+ *
+ * PCI BIOS Specification
+ * PCI Local Bus Specification
+ * PCI to PCI Bridge Specification
+ * PCI System Design Guide
+ */
+
+#ifndef LINUX_PCI_H
+#define LINUX_PCI_H
+
+#include <linux/pci_regs.h> /* The pci register defines */
+
+/*
+ * The PCI interface treats multi-function devices as independent
+ * devices. The slot/function address of each device is encoded
+ * in a single byte as follows:
+ *
+ * 7:3 = slot
+ * 2:0 = function
+ */
+#define PCI_DEVFN(slot, func) ((((slot) & 0x1f) << 3) | ((func) & 0x07))
+#define PCI_SLOT(devfn) (((devfn) >> 3) & 0x1f)
+#define PCI_FUNC(devfn) ((devfn) & 0x07)
+
+/* Ioctls for /proc/bus/pci/X/Y nodes. */
+#define PCIIOC_BASE ('P' << 24 | 'C' << 16 | 'I' << 8)
+#define PCIIOC_CONTROLLER (PCIIOC_BASE | 0x00) /* Get controller for PCI device. */
+#define PCIIOC_MMAP_IS_IO (PCIIOC_BASE | 0x01) /* Set mmap state to I/O space. */
+#define PCIIOC_MMAP_IS_MEM (PCIIOC_BASE | 0x02) /* Set mmap state to MEM space. */
+#define PCIIOC_WRITE_COMBINE (PCIIOC_BASE | 0x03) /* Enable/disable write-combining. */
+
+#ifdef __KERNEL__
+
+#include <linux/mod_devicetable.h>
+
+#include <linux/types.h>
+#include <init.h>
+#include <linux/ioport.h>
+#include <linux/list.h>
+#include <linux/compiler.h>
+#include <errno.h>
+//#include <linux/kobject.h>
+//#include <asm/atomic.h>
+//#include <linux/device.h>
+#include <asm/io.h>
+//#include <linux/irqreturn.h>
+
+/* Include the ID list */
+#include <linux/pci_ids.h>
+
+/* Include architecture-dependent settings and functions */
+
+//#include <asm/pci.h>
+
+/*
+ * Error values that may be returned by PCI functions.
+ */
+#define PCIBIOS_SUCCESSFUL 0x00
+#define PCIBIOS_FUNC_NOT_SUPPORTED 0x81
+#define PCIBIOS_BAD_VENDOR_ID 0x83
+#define PCIBIOS_DEVICE_NOT_FOUND 0x86
+#define PCIBIOS_BAD_REGISTER_NUMBER 0x87
+#define PCIBIOS_SET_FAILED 0x88
+#define PCIBIOS_BUFFER_TOO_SMALL 0x89
+
+#define DEVICE_COUNT_RESOURCE 12
+#define PCI_BRIDGE_RESOURCE_NUM 2
+/*
+ * There is one pci_dev structure for each slot-number/function-number
+ * combination:
+ */
+struct pci_dev {
+ struct list_head bus_list; /* node in per-bus list */
+ struct pci_bus *bus; /* bus this device is on */
+ struct pci_bus *subordinate; /* bus this device bridges to */
+
+ void *sysdata; /* hook for sys-specific extension */
+ struct proc_dir_entry *procent; /* device entry in /proc/bus/pci */
+ struct pci_slot *slot; /* Physical slot this device is in */
+
+ struct device_d dev;
+
+ unsigned int devfn; /* encoded device & function index */
+ unsigned short vendor;
+ unsigned short device;
+ unsigned short subsystem_vendor;
+ unsigned short subsystem_device;
+ unsigned int class; /* 3 bytes: (base,sub,prog-if) */
+ u8 revision; /* PCI revision, low byte of class word */
+ u8 hdr_type; /* PCI header type (`multi' flag masked out) */
+ u8 pcie_cap; /* PCI-E capability offset */
+ u8 pcie_type; /* PCI-E device/port type */
+ u8 rom_base_reg; /* which config register controls the ROM */
+ u8 pin; /* which interrupt pin this device uses */
+
+ /*
+ * In theory, the irq level can be read from configuration
+ * space and all would be fine. However, old PCI chips don't
+ * support these registers and return 0 instead. For example,
+ * the Vision864-P rev 0 chip can uses INTA, but returns 0 in
+ * the interrupt line and pin registers. pci_init()
+ * initializes this field with the value at PCI_INTERRUPT_LINE
+ * and it is the job of pcibios_fixup() to change it if
+ * necessary. The field must not be 0 unless the device
+ * cannot generate interrupts at all.
+ */
+ unsigned int irq; /* irq generated by this device */
+ struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */
+
+ /* Base registers for this device, can be adjusted by
+ * pcibios_fixup() as necessary.
+ */
+ unsigned long base_address[6];
+ unsigned long rom_address;
+};
+#define to_pci_dev(dev) container_of(dev, struct pci_dev, dev)
+
+struct pci_bus {
+ struct list_head node; /* node in list of buses */
+ struct pci_bus *parent; /* parent bus this bridge is on */
+ struct list_head children; /* list of child buses */
+ struct list_head devices; /* list of devices on this bus */
+ struct pci_dev *self; /* bridge device as seen by parent */
+ struct list_head slots; /* list of slots on this bus */
+ struct resource *resource[PCI_BRIDGE_RESOURCE_NUM];
+ struct list_head resources; /* address space routed to this bus */
+
+ struct pci_ops *ops; /* configuration access functions */
+ void *sysdata; /* hook for sys-specific extension */
+ struct proc_dir_entry *procdir; /* directory entry in /proc/bus/pci */
+
+ unsigned char number; /* bus number */
+ unsigned char primary; /* number of primary bridge */
+ unsigned char secondary; /* number of secondary bridge */
+ unsigned char subordinate; /* max number of subordinate buses */
+ unsigned char max_bus_speed; /* enum pci_bus_speed */
+ unsigned char cur_bus_speed; /* enum pci_bus_speed */
+
+ char name[48];
+};
+
+/* Low-level architecture-dependent routines */
+
+struct pci_ops {
+ int (*read)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
+ int (*write)(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
+
+ /* return memory address for pci resource */
+ int (*res_start)(struct pci_bus *bus, resource_size_t res_addr);
+};
+
+extern struct pci_ops * pci_ops;
+
+static inline int pci_present()
+{
+ return 1;
+}
+
+#ifndef PCIBIOS_MAX_MEM_32
+#define PCIBIOS_MAX_MEM_32 (-1)
+#endif
+
+/*
+ * Each pci channel is a top-level PCI bus seem by CPU. A machine with
+ * multiple PCI channels may have multiple PCI host controllers or a
+ * single controller supporting multiple channels.
+ */
+struct pci_controller {
+ struct pci_controller *next;
+ struct pci_bus *bus;
+
+ struct pci_ops *pci_ops;
+ struct resource *mem_resource;
+ unsigned long mem_offset;
+ struct resource *io_resource;
+ unsigned long io_offset;
+ unsigned long io_map_base;
+
+ unsigned int index;
+ /* For compatibility with current (as of July 2003) pciutils
+ and XFree86. Eventually will be removed. */
+ unsigned int need_domain_info;
+
+ int iommu;
+
+ /* Optional access methods for reading/writing the bus number
+ of the PCI controller */
+ int (*get_busno)(void);
+ void (*set_busno)(int busno);
+};
+
+extern void register_pci_controller(struct pci_controller *hose);
+
+struct pci_driver {
+ struct list_head node;
+ const char *name;
+ const struct pci_device_id *id_table; /* must be non-NULL for probe to be called */
+ int (*probe) (struct pci_dev *dev, const struct pci_device_id *id); /* New device inserted */
+ void (*remove) (struct pci_dev *dev); /* Device removed (NULL if not a hot-plug capable driver) */
+ struct driver_d driver;
+};
+
+#define to_pci_driver(drv) container_of(drv, struct pci_driver, driver)
+
+/**
+ * DEFINE_PCI_DEVICE_TABLE - macro used to describe a pci device table
+ * @_table: device table name
+ *
+ * This macro is used to create a struct pci_device_id array (a device table)
+ * in a generic manner.
+ */
+#define DEFINE_PCI_DEVICE_TABLE(_table) \
+ const struct pci_device_id _table[]
+
+/**
+ * PCI_DEVICE - macro used to describe a specific pci device
+ * @vend: the 16 bit PCI Vendor ID
+ * @dev: the 16 bit PCI Device ID
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific device. The subvendor and subdevice fields will be set to
+ * PCI_ANY_ID.
+ */
+#define PCI_DEVICE(vend,dev) \
+ .vendor = (vend), .device = (dev), \
+ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
+
+/**
+ * PCI_DEVICE_CLASS - macro used to describe a specific pci device class
+ * @dev_class: the class, subclass, prog-if triple for this device
+ * @dev_class_mask: the class mask for this device
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific PCI class. The vendor, device, subvendor, and subdevice
+ * fields will be set to PCI_ANY_ID.
+ */
+#define PCI_DEVICE_CLASS(dev_class,dev_class_mask) \
+ .class = (dev_class), .class_mask = (dev_class_mask), \
+ .vendor = PCI_ANY_ID, .device = PCI_ANY_ID, \
+ .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
+
+/**
+ * PCI_VDEVICE - macro used to describe a specific pci device in short form
+ * @vendor: the vendor name
+ * @device: the 16 bit PCI Device ID
+ *
+ * This macro is used to create a struct pci_device_id that matches a
+ * specific PCI device. The subvendor, and subdevice fields will be set
+ * to PCI_ANY_ID. The macro allows the next field to follow as the device
+ * private data.
+ */
+
+#define PCI_VDEVICE(vendor, device) \
+ PCI_VENDOR_ID_##vendor, (device), \
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0
+
+int pci_register_driver(struct pci_driver *pdrv);
+int pci_register_device(struct pci_dev *pdev);
+
+#endif /* __KERNEL__ */
+#endif /* LINUX_PCI_H */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
new file mode 100644
index 0000000..49e2954
--- /dev/null
+++ b/include/linux/pci_ids.h
@@ -0,0 +1,136 @@
+/*
+ * PCI Class, Vendor and Device IDs
+ *
+ * Please keep sorted.
+ *
+ * Do not add new entries to this file unless the definitions
+ * are shared between multiple drivers.
+ */
+
+/* Device classes and subclasses */
+
+#define PCI_CLASS_NOT_DEFINED 0x0000
+#define PCI_CLASS_NOT_DEFINED_VGA 0x0001
+
+#define PCI_BASE_CLASS_STORAGE 0x01
+#define PCI_CLASS_STORAGE_SCSI 0x0100
+#define PCI_CLASS_STORAGE_IDE 0x0101
+#define PCI_CLASS_STORAGE_FLOPPY 0x0102
+#define PCI_CLASS_STORAGE_IPI 0x0103
+#define PCI_CLASS_STORAGE_RAID 0x0104
+#define PCI_CLASS_STORAGE_SATA 0x0106
+#define PCI_CLASS_STORAGE_SATA_AHCI 0x010601
+#define PCI_CLASS_STORAGE_SAS 0x0107
+#define PCI_CLASS_STORAGE_OTHER 0x0180
+
+#define PCI_BASE_CLASS_NETWORK 0x02
+#define PCI_CLASS_NETWORK_ETHERNET 0x0200
+#define PCI_CLASS_NETWORK_TOKEN_RING 0x0201
+#define PCI_CLASS_NETWORK_FDDI 0x0202
+#define PCI_CLASS_NETWORK_ATM 0x0203
+#define PCI_CLASS_NETWORK_OTHER 0x0280
+
+#define PCI_BASE_CLASS_DISPLAY 0x03
+#define PCI_CLASS_DISPLAY_VGA 0x0300
+#define PCI_CLASS_DISPLAY_XGA 0x0301
+#define PCI_CLASS_DISPLAY_3D 0x0302
+#define PCI_CLASS_DISPLAY_OTHER 0x0380
+
+#define PCI_BASE_CLASS_MULTIMEDIA 0x04
+#define PCI_CLASS_MULTIMEDIA_VIDEO 0x0400
+#define PCI_CLASS_MULTIMEDIA_AUDIO 0x0401
+#define PCI_CLASS_MULTIMEDIA_PHONE 0x0402
+#define PCI_CLASS_MULTIMEDIA_OTHER 0x0480
+
+#define PCI_BASE_CLASS_MEMORY 0x05
+#define PCI_CLASS_MEMORY_RAM 0x0500
+#define PCI_CLASS_MEMORY_FLASH 0x0501
+#define PCI_CLASS_MEMORY_OTHER 0x0580
+
+#define PCI_BASE_CLASS_BRIDGE 0x06
+#define PCI_CLASS_BRIDGE_HOST 0x0600
+#define PCI_CLASS_BRIDGE_ISA 0x0601
+#define PCI_CLASS_BRIDGE_EISA 0x0602
+#define PCI_CLASS_BRIDGE_MC 0x0603
+#define PCI_CLASS_BRIDGE_PCI 0x0604
+#define PCI_CLASS_BRIDGE_PCMCIA 0x0605
+#define PCI_CLASS_BRIDGE_NUBUS 0x0606
+#define PCI_CLASS_BRIDGE_CARDBUS 0x0607
+#define PCI_CLASS_BRIDGE_RACEWAY 0x0608
+#define PCI_CLASS_BRIDGE_OTHER 0x0680
+
+#define PCI_BASE_CLASS_COMMUNICATION 0x07
+#define PCI_CLASS_COMMUNICATION_SERIAL 0x0700
+#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701
+#define PCI_CLASS_COMMUNICATION_MULTISERIAL 0x0702
+#define PCI_CLASS_COMMUNICATION_MODEM 0x0703
+#define PCI_CLASS_COMMUNICATION_OTHER 0x0780
+
+#define PCI_BASE_CLASS_SYSTEM 0x08
+#define PCI_CLASS_SYSTEM_PIC 0x0800
+#define PCI_CLASS_SYSTEM_PIC_IOAPIC 0x080010
+#define PCI_CLASS_SYSTEM_PIC_IOXAPIC 0x080020
+#define PCI_CLASS_SYSTEM_DMA 0x0801
+#define PCI_CLASS_SYSTEM_TIMER 0x0802
+#define PCI_CLASS_SYSTEM_RTC 0x0803
+#define PCI_CLASS_SYSTEM_PCI_HOTPLUG 0x0804
+#define PCI_CLASS_SYSTEM_SDHCI 0x0805
+#define PCI_CLASS_SYSTEM_OTHER 0x0880
+
+#define PCI_BASE_CLASS_INPUT 0x09
+#define PCI_CLASS_INPUT_KEYBOARD 0x0900
+#define PCI_CLASS_INPUT_PEN 0x0901
+#define PCI_CLASS_INPUT_MOUSE 0x0902
+#define PCI_CLASS_INPUT_SCANNER 0x0903
+#define PCI_CLASS_INPUT_GAMEPORT 0x0904
+#define PCI_CLASS_INPUT_OTHER 0x0980
+
+#define PCI_BASE_CLASS_DOCKING 0x0a
+#define PCI_CLASS_DOCKING_GENERIC 0x0a00
+#define PCI_CLASS_DOCKING_OTHER 0x0a80
+
+#define PCI_BASE_CLASS_PROCESSOR 0x0b
+#define PCI_CLASS_PROCESSOR_386 0x0b00
+#define PCI_CLASS_PROCESSOR_486 0x0b01
+#define PCI_CLASS_PROCESSOR_PENTIUM 0x0b02
+#define PCI_CLASS_PROCESSOR_ALPHA 0x0b10
+#define PCI_CLASS_PROCESSOR_POWERPC 0x0b20
+#define PCI_CLASS_PROCESSOR_MIPS 0x0b30
+#define PCI_CLASS_PROCESSOR_CO 0x0b40
+
+#define PCI_BASE_CLASS_SERIAL 0x0c
+#define PCI_CLASS_SERIAL_FIREWIRE 0x0c00
+#define PCI_CLASS_SERIAL_FIREWIRE_OHCI 0x0c0010
+#define PCI_CLASS_SERIAL_ACCESS 0x0c01
+#define PCI_CLASS_SERIAL_SSA 0x0c02
+#define PCI_CLASS_SERIAL_USB 0x0c03
+#define PCI_CLASS_SERIAL_USB_UHCI 0x0c0300
+#define PCI_CLASS_SERIAL_USB_OHCI 0x0c0310
+#define PCI_CLASS_SERIAL_USB_EHCI 0x0c0320
+#define PCI_CLASS_SERIAL_USB_XHCI 0x0c0330
+#define PCI_CLASS_SERIAL_FIBER 0x0c04
+#define PCI_CLASS_SERIAL_SMBUS 0x0c05
+
+#define PCI_BASE_CLASS_WIRELESS 0x0d
+#define PCI_CLASS_WIRELESS_RF_CONTROLLER 0x0d10
+#define PCI_CLASS_WIRELESS_WHCI 0x0d1010
+
+#define PCI_BASE_CLASS_INTELLIGENT 0x0e
+#define PCI_CLASS_INTELLIGENT_I2O 0x0e00
+
+#define PCI_BASE_CLASS_SATELLITE 0x0f
+#define PCI_CLASS_SATELLITE_TV 0x0f00
+#define PCI_CLASS_SATELLITE_AUDIO 0x0f01
+#define PCI_CLASS_SATELLITE_VOICE 0x0f03
+#define PCI_CLASS_SATELLITE_DATA 0x0f04
+
+#define PCI_BASE_CLASS_CRYPT 0x10
+#define PCI_CLASS_CRYPT_NETWORK 0x1000
+#define PCI_CLASS_CRYPT_ENTERTAINMENT 0x1001
+#define PCI_CLASS_CRYPT_OTHER 0x1080
+
+#define PCI_BASE_CLASS_SIGNAL_PROCESSING 0x11
+#define PCI_CLASS_SP_DPIO 0x1100
+#define PCI_CLASS_SP_OTHER 0x1180
+
+#define PCI_CLASS_OTHERS 0xff
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
new file mode 100644
index 0000000..be01380
--- /dev/null
+++ b/include/linux/pci_regs.h
@@ -0,0 +1,698 @@
+/*
+ * pci_regs.h
+ *
+ * PCI standard defines
+ * Copyright 1994, Drew Eckhardt
+ * Copyright 1997--1999 Martin Mares <mj at ucw.cz>
+ *
+ * For more information, please consult the following manuals (look at
+ * http://www.pcisig.com/ for how to get them):
+ *
+ * PCI BIOS Specification
+ * PCI Local Bus Specification
+ * PCI to PCI Bridge Specification
+ * PCI System Design Guide
+ *
+ * For hypertransport information, please consult the following manuals
+ * from http://www.hypertransport.org
+ *
+ * The Hypertransport I/O Link Specification
+ */
+
+#ifndef LINUX_PCI_REGS_H
+#define LINUX_PCI_REGS_H
+
+/*
+ * Under PCI, each device has 256 bytes of configuration address space,
+ * of which the first 64 bytes are standardized as follows:
+ */
+#define PCI_VENDOR_ID 0x00 /* 16 bits */
+#define PCI_DEVICE_ID 0x02 /* 16 bits */
+#define PCI_COMMAND 0x04 /* 16 bits */
+#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */
+#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */
+#define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */
+#define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */
+#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */
+#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */
+#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */
+#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */
+#define PCI_COMMAND_SERR 0x100 /* Enable SERR */
+#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */
+#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
+
+#define PCI_STATUS 0x06 /* 16 bits */
+#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */
+#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */
+#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */
+#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */
+#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */
+#define PCI_STATUS_PARITY 0x100 /* Detected parity error */
+#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */
+#define PCI_STATUS_DEVSEL_FAST 0x000
+#define PCI_STATUS_DEVSEL_MEDIUM 0x200
+#define PCI_STATUS_DEVSEL_SLOW 0x400
+#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */
+#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */
+#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */
+#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */
+#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */
+
+#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 revision */
+#define PCI_REVISION_ID 0x08 /* Revision ID */
+#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */
+#define PCI_CLASS_DEVICE 0x0a /* Device class */
+
+#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */
+#define PCI_LATENCY_TIMER 0x0d /* 8 bits */
+#define PCI_HEADER_TYPE 0x0e /* 8 bits */
+#define PCI_HEADER_TYPE_NORMAL 0
+#define PCI_HEADER_TYPE_BRIDGE 1
+#define PCI_HEADER_TYPE_CARDBUS 2
+
+#define PCI_BIST 0x0f /* 8 bits */
+#define PCI_BIST_CODE_MASK 0x0f /* Return result */
+#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */
+#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */
+
+/*
+ * Base addresses specify locations in memory or I/O space.
+ * Decoded size can be determined by writing a value of
+ * 0xffffffff to the register, and reading it back. Only
+ * 1 bits are decoded.
+ */
+#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */
+#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */
+#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */
+#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */
+#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */
+#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */
+#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */
+#define PCI_BASE_ADDRESS_SPACE_IO 0x01
+#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00
+#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06
+#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */
+#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */
+#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */
+#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */
+#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL)
+#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL)
+/* bit 1 is reserved if address_space = 1 */
+
+/* Header type 0 (normal devices) */
+#define PCI_CARDBUS_CIS 0x28
+#define PCI_SUBSYSTEM_VENDOR_ID 0x2c
+#define PCI_SUBSYSTEM_ID 0x2e
+#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */
+#define PCI_ROM_ADDRESS_ENABLE 0x01
+#define PCI_ROM_ADDRESS_MASK (~0x7ffUL)
+
+#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */
+
+/* 0x35-0x3b are reserved */
+#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */
+#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */
+#define PCI_MIN_GNT 0x3e /* 8 bits */
+#define PCI_MAX_LAT 0x3f /* 8 bits */
+
+/* Header type 1 (PCI-to-PCI bridges) */
+#define PCI_PRIMARY_BUS 0x18 /* Primary bus number */
+#define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */
+#define PCI_SUBORDINATE_BUS 0x1a /* Highest bus number behind the bridge */
+#define PCI_SEC_LATENCY_TIMER 0x1b /* Latency timer for secondary interface */
+#define PCI_IO_BASE 0x1c /* I/O range behind the bridge */
+#define PCI_IO_LIMIT 0x1d
+#define PCI_IO_RANGE_TYPE_MASK 0x0fUL /* I/O bridging type */
+#define PCI_IO_RANGE_TYPE_16 0x00
+#define PCI_IO_RANGE_TYPE_32 0x01
+#define PCI_IO_RANGE_MASK (~0x0fUL)
+#define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */
+#define PCI_MEMORY_BASE 0x20 /* Memory range behind */
+#define PCI_MEMORY_LIMIT 0x22
+#define PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL
+#define PCI_MEMORY_RANGE_MASK (~0x0fUL)
+#define PCI_PREF_MEMORY_BASE 0x24 /* Prefetchable memory range behind */
+#define PCI_PREF_MEMORY_LIMIT 0x26
+#define PCI_PREF_RANGE_TYPE_MASK 0x0fUL
+#define PCI_PREF_RANGE_TYPE_32 0x00
+#define PCI_PREF_RANGE_TYPE_64 0x01
+#define PCI_PREF_RANGE_MASK (~0x0fUL)
+#define PCI_PREF_BASE_UPPER32 0x28 /* Upper half of prefetchable memory range */
+#define PCI_PREF_LIMIT_UPPER32 0x2c
+#define PCI_IO_BASE_UPPER16 0x30 /* Upper half of I/O addresses */
+#define PCI_IO_LIMIT_UPPER16 0x32
+/* 0x34 same as for htype 0 */
+/* 0x35-0x3b is reserved */
+#define PCI_ROM_ADDRESS1 0x38 /* Same as PCI_ROM_ADDRESS, but for htype 1 */
+/* 0x3c-0x3d are same as for htype 0 */
+#define PCI_BRIDGE_CONTROL 0x3e
+#define PCI_BRIDGE_CTL_PARITY 0x01 /* Enable parity detection on secondary interface */
+#define PCI_BRIDGE_CTL_SERR 0x02 /* The same for SERR forwarding */
+#define PCI_BRIDGE_CTL_ISA 0x04 /* Enable ISA mode */
+#define PCI_BRIDGE_CTL_VGA 0x08 /* Forward VGA addresses */
+#define PCI_BRIDGE_CTL_MASTER_ABORT 0x20 /* Report master aborts */
+#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */
+#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */
+
+/* Header type 2 (CardBus bridges) */
+#define PCI_CB_CAPABILITY_LIST 0x14
+/* 0x15 reserved */
+#define PCI_CB_SEC_STATUS 0x16 /* Secondary status */
+#define PCI_CB_PRIMARY_BUS 0x18 /* PCI bus number */
+#define PCI_CB_CARD_BUS 0x19 /* CardBus bus number */
+#define PCI_CB_SUBORDINATE_BUS 0x1a /* Subordinate bus number */
+#define PCI_CB_LATENCY_TIMER 0x1b /* CardBus latency timer */
+#define PCI_CB_MEMORY_BASE_0 0x1c
+#define PCI_CB_MEMORY_LIMIT_0 0x20
+#define PCI_CB_MEMORY_BASE_1 0x24
+#define PCI_CB_MEMORY_LIMIT_1 0x28
+#define PCI_CB_IO_BASE_0 0x2c
+#define PCI_CB_IO_BASE_0_HI 0x2e
+#define PCI_CB_IO_LIMIT_0 0x30
+#define PCI_CB_IO_LIMIT_0_HI 0x32
+#define PCI_CB_IO_BASE_1 0x34
+#define PCI_CB_IO_BASE_1_HI 0x36
+#define PCI_CB_IO_LIMIT_1 0x38
+#define PCI_CB_IO_LIMIT_1_HI 0x3a
+#define PCI_CB_IO_RANGE_MASK (~0x03UL)
+/* 0x3c-0x3d are same as for htype 0 */
+#define PCI_CB_BRIDGE_CONTROL 0x3e
+#define PCI_CB_BRIDGE_CTL_PARITY 0x01 /* Similar to standard bridge control register */
+#define PCI_CB_BRIDGE_CTL_SERR 0x02
+#define PCI_CB_BRIDGE_CTL_ISA 0x04
+#define PCI_CB_BRIDGE_CTL_VGA 0x08
+#define PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20
+#define PCI_CB_BRIDGE_CTL_CB_RESET 0x40 /* CardBus reset */
+#define PCI_CB_BRIDGE_CTL_16BIT_INT 0x80 /* Enable interrupt for 16-bit cards */
+#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100 /* Prefetch enable for both memory regions */
+#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200
+#define PCI_CB_BRIDGE_CTL_POST_WRITES 0x400
+#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40
+#define PCI_CB_SUBSYSTEM_ID 0x42
+#define PCI_CB_LEGACY_MODE_BASE 0x44 /* 16-bit PC Card legacy mode base address (ExCa) */
+/* 0x48-0x7f reserved */
+
+/* Capability lists */
+
+#define PCI_CAP_LIST_ID 0 /* Capability ID */
+#define PCI_CAP_ID_PM 0x01 /* Power Management */
+#define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */
+#define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */
+#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */
+#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */
+#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */
+#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */
+#define PCI_CAP_ID_HT 0x08 /* HyperTransport */
+#define PCI_CAP_ID_VNDR 0x09 /* Vendor specific */
+#define PCI_CAP_ID_DBG 0x0A /* Debug port */
+#define PCI_CAP_ID_CCRC 0x0B /* CompactPCI Central Resource Control */
+#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */
+#define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */
+#define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */
+#define PCI_CAP_ID_EXP 0x10 /* PCI Express */
+#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */
+#define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */
+#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */
+#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */
+#define PCI_CAP_SIZEOF 4
+
+/* Power Management Registers */
+
+#define PCI_PM_PMC 2 /* PM Capabilities Register */
+#define PCI_PM_CAP_VER_MASK 0x0007 /* Version */
+#define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */
+#define PCI_PM_CAP_RESERVED 0x0010 /* Reserved field */
+#define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */
+#define PCI_PM_CAP_AUX_POWER 0x01C0 /* Auxiliary power support mask */
+#define PCI_PM_CAP_D1 0x0200 /* D1 power state support */
+#define PCI_PM_CAP_D2 0x0400 /* D2 power state support */
+#define PCI_PM_CAP_PME 0x0800 /* PME pin supported */
+#define PCI_PM_CAP_PME_MASK 0xF800 /* PME Mask of all supported states */
+#define PCI_PM_CAP_PME_D0 0x0800 /* PME# from D0 */
+#define PCI_PM_CAP_PME_D1 0x1000 /* PME# from D1 */
+#define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */
+#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */
+#define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */
+#define PCI_PM_CAP_PME_SHIFT 11 /* Start of the PME Mask in PMC */
+#define PCI_PM_CTRL 4 /* PM control and status register */
+#define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */
+#define PCI_PM_CTRL_NO_SOFT_RESET 0x0008 /* No reset for D3hot->D0 */
+#define PCI_PM_CTRL_PME_ENABLE 0x0100 /* PME pin enable */
+#define PCI_PM_CTRL_DATA_SEL_MASK 0x1e00 /* Data select (??) */
+#define PCI_PM_CTRL_DATA_SCALE_MASK 0x6000 /* Data scale (??) */
+#define PCI_PM_CTRL_PME_STATUS 0x8000 /* PME pin status */
+#define PCI_PM_PPB_EXTENSIONS 6 /* PPB support extensions (??) */
+#define PCI_PM_PPB_B2_B3 0x40 /* Stop clock when in D3hot (??) */
+#define PCI_PM_BPCC_ENABLE 0x80 /* Bus power/clock control enable (??) */
+#define PCI_PM_DATA_REGISTER 7 /* (??) */
+#define PCI_PM_SIZEOF 8
+
+/* AGP registers */
+
+#define PCI_AGP_VERSION 2 /* BCD version number */
+#define PCI_AGP_RFU 3 /* Rest of capability flags */
+#define PCI_AGP_STATUS 4 /* Status register */
+#define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */
+#define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */
+#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */
+#define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */
+#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */
+#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */
+#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */
+#define PCI_AGP_COMMAND 8 /* Control register */
+#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */
+#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */
+#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */
+#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */
+#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */
+#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */
+#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */
+#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */
+#define PCI_AGP_SIZEOF 12
+
+/* Vital Product Data */
+
+#define PCI_VPD_ADDR 2 /* Address to access (15 bits!) */
+#define PCI_VPD_ADDR_MASK 0x7fff /* Address mask */
+#define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */
+#define PCI_VPD_DATA 4 /* 32-bits of data returned here */
+
+/* Slot Identification */
+
+#define PCI_SID_ESR 2 /* Expansion Slot Register */
+#define PCI_SID_ESR_NSLOTS 0x1f /* Number of expansion slots available */
+#define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */
+#define PCI_SID_CHASSIS_NR 3 /* Chassis Number */
+
+/* Message Signalled Interrupts registers */
+
+#define PCI_MSI_FLAGS 2 /* Various flags */
+#define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */
+#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */
+#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */
+#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */
+#define PCI_MSI_FLAGS_MASKBIT 0x100 /* 64-bit mask bits allowed */
+#define PCI_MSI_RFU 3 /* Rest of capability flags */
+#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */
+#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */
+#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */
+#define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */
+#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */
+#define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */
+
+/* MSI-X registers */
+#define PCI_MSIX_FLAGS 2
+#define PCI_MSIX_FLAGS_QSIZE 0x7FF
+#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
+#define PCI_MSIX_FLAGS_MASKALL (1 << 14)
+#define PCI_MSIX_TABLE 4
+#define PCI_MSIX_PBA 8
+#define PCI_MSIX_FLAGS_BIRMASK (7 << 0)
+
+/* MSI-X entry's format */
+#define PCI_MSIX_ENTRY_SIZE 16
+#define PCI_MSIX_ENTRY_LOWER_ADDR 0
+#define PCI_MSIX_ENTRY_UPPER_ADDR 4
+#define PCI_MSIX_ENTRY_DATA 8
+#define PCI_MSIX_ENTRY_VECTOR_CTRL 12
+#define PCI_MSIX_ENTRY_CTRL_MASKBIT 1
+
+/* CompactPCI Hotswap Register */
+
+#define PCI_CHSWP_CSR 2 /* Control and Status Register */
+#define PCI_CHSWP_DHA 0x01 /* Device Hiding Arm */
+#define PCI_CHSWP_EIM 0x02 /* ENUM# Signal Mask */
+#define PCI_CHSWP_PIE 0x04 /* Pending Insert or Extract */
+#define PCI_CHSWP_LOO 0x08 /* LED On / Off */
+#define PCI_CHSWP_PI 0x30 /* Programming Interface */
+#define PCI_CHSWP_EXT 0x40 /* ENUM# status - extraction */
+#define PCI_CHSWP_INS 0x80 /* ENUM# status - insertion */
+
+/* PCI Advanced Feature registers */
+
+#define PCI_AF_LENGTH 2
+#define PCI_AF_CAP 3
+#define PCI_AF_CAP_TP 0x01
+#define PCI_AF_CAP_FLR 0x02
+#define PCI_AF_CTRL 4
+#define PCI_AF_CTRL_FLR 0x01
+#define PCI_AF_STATUS 5
+#define PCI_AF_STATUS_TP 0x01
+
+/* PCI-X registers */
+
+#define PCI_X_CMD 2 /* Modes & Features */
+#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */
+#define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */
+#define PCI_X_CMD_READ_512 0x0000 /* 512 byte maximum read byte count */
+#define PCI_X_CMD_READ_1K 0x0004 /* 1Kbyte maximum read byte count */
+#define PCI_X_CMD_READ_2K 0x0008 /* 2Kbyte maximum read byte count */
+#define PCI_X_CMD_READ_4K 0x000c /* 4Kbyte maximum read byte count */
+#define PCI_X_CMD_MAX_READ 0x000c /* Max Memory Read Byte Count */
+ /* Max # of outstanding split transactions */
+#define PCI_X_CMD_SPLIT_1 0x0000 /* Max 1 */
+#define PCI_X_CMD_SPLIT_2 0x0010 /* Max 2 */
+#define PCI_X_CMD_SPLIT_3 0x0020 /* Max 3 */
+#define PCI_X_CMD_SPLIT_4 0x0030 /* Max 4 */
+#define PCI_X_CMD_SPLIT_8 0x0040 /* Max 8 */
+#define PCI_X_CMD_SPLIT_12 0x0050 /* Max 12 */
+#define PCI_X_CMD_SPLIT_16 0x0060 /* Max 16 */
+#define PCI_X_CMD_SPLIT_32 0x0070 /* Max 32 */
+#define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max Outstanding Split Transactions */
+#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */
+#define PCI_X_STATUS 4 /* PCI-X capabilities */
+#define PCI_X_STATUS_DEVFN 0x000000ff /* A copy of devfn */
+#define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of bus nr */
+#define PCI_X_STATUS_64BIT 0x00010000 /* 64-bit device */
+#define PCI_X_STATUS_133MHZ 0x00020000 /* 133 MHz capable */
+#define PCI_X_STATUS_SPL_DISC 0x00040000 /* Split Completion Discarded */
+#define PCI_X_STATUS_UNX_SPL 0x00080000 /* Unexpected Split Completion */
+#define PCI_X_STATUS_COMPLEX 0x00100000 /* Device Complexity */
+#define PCI_X_STATUS_MAX_READ 0x00600000 /* Designed Max Memory Read Count */
+#define PCI_X_STATUS_MAX_SPLIT 0x03800000 /* Designed Max Outstanding Split Transactions */
+#define PCI_X_STATUS_MAX_CUM 0x1c000000 /* Designed Max Cumulative Read Size */
+#define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */
+#define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */
+#define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */
+
+/* PCI Bridge Subsystem ID registers */
+
+#define PCI_SSVID_VENDOR_ID 4 /* PCI-Bridge subsystem vendor id register */
+#define PCI_SSVID_DEVICE_ID 6 /* PCI-Bridge subsystem device id register */
+
+/* PCI Express capability registers */
+
+#define PCI_EXP_FLAGS 2 /* Capabilities register */
+#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */
+#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */
+#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */
+#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */
+#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */
+#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */
+#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */
+#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */
+#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */
+#define PCI_EXP_TYPE_RC_EC 0x10 /* Root Complex Event Collector */
+#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */
+#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */
+#define PCI_EXP_DEVCAP 4 /* Device capabilities */
+#define PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */
+#define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */
+#define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */
+#define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */
+#define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */
+#define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */
+#define PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */
+#define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */
+#define PCI_EXP_DEVCAP_RBER 0x8000 /* Role-Based Error Reporting */
+#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */
+#define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */
+#define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */
+#define PCI_EXP_DEVCTL 8 /* Device Control */
+#define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */
+#define PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */
+#define PCI_EXP_DEVCTL_FERE 0x0004 /* Fatal Error Reporting Enable */
+#define PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */
+#define PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */
+#define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */
+#define PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */
+#define PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */
+#define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */
+#define PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800 /* Enable No Snoop */
+#define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */
+#define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */
+#define PCI_EXP_DEVSTA 10 /* Device Status */
+#define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */
+#define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */
+#define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */
+#define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */
+#define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */
+#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */
+#define PCI_EXP_LNKCAP 12 /* Link Capabilities */
+#define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */
+#define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */
+#define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */
+#define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */
+#define PCI_EXP_LNKCAP_L1EL 0x00038000 /* L1 Exit Latency */
+#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* L1 Clock Power Management */
+#define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Surprise Down Error Reporting Capable */
+#define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */
+#define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */
+#define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */
+#define PCI_EXP_LNKCTL 16 /* Link Control */
+#define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */
+#define PCI_EXP_LNKCTL_RCB 0x0008 /* Read Completion Boundary */
+#define PCI_EXP_LNKCTL_LD 0x0010 /* Link Disable */
+#define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link */
+#define PCI_EXP_LNKCTL_CCC 0x0040 /* Common Clock Configuration */
+#define PCI_EXP_LNKCTL_ES 0x0080 /* Extended Synch */
+#define PCI_EXP_LNKCTL_CLKREQ_EN 0x100 /* Enable clkreq */
+#define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */
+#define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */
+#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Lnk Autonomous Bandwidth Interrupt Enable */
+#define PCI_EXP_LNKSTA 18 /* Link Status */
+#define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */
+#define PCI_EXP_LNKSTA_CLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */
+#define PCI_EXP_LNKSTA_CLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */
+#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated Link Width */
+#define PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask in link status */
+#define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */
+#define PCI_EXP_LNKSTA_SLC 0x1000 /* Slot Clock Configuration */
+#define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */
+#define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */
+#define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */
+#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */
+#define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */
+#define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */
+#define PCI_EXP_SLTCAP_MRLSP 0x00000004 /* MRL Sensor Present */
+#define PCI_EXP_SLTCAP_AIP 0x00000008 /* Attention Indicator Present */
+#define PCI_EXP_SLTCAP_PIP 0x00000010 /* Power Indicator Present */
+#define PCI_EXP_SLTCAP_HPS 0x00000020 /* Hot-Plug Surprise */
+#define PCI_EXP_SLTCAP_HPC 0x00000040 /* Hot-Plug Capable */
+#define PCI_EXP_SLTCAP_SPLV 0x00007f80 /* Slot Power Limit Value */
+#define PCI_EXP_SLTCAP_SPLS 0x00018000 /* Slot Power Limit Scale */
+#define PCI_EXP_SLTCAP_EIP 0x00020000 /* Electromechanical Interlock Present */
+#define PCI_EXP_SLTCAP_NCCS 0x00040000 /* No Command Completed Support */
+#define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */
+#define PCI_EXP_SLTCTL 24 /* Slot Control */
+#define PCI_EXP_SLTCTL_ABPE 0x0001 /* Attention Button Pressed Enable */
+#define PCI_EXP_SLTCTL_PFDE 0x0002 /* Power Fault Detected Enable */
+#define PCI_EXP_SLTCTL_MRLSCE 0x0004 /* MRL Sensor Changed Enable */
+#define PCI_EXP_SLTCTL_PDCE 0x0008 /* Presence Detect Changed Enable */
+#define PCI_EXP_SLTCTL_CCIE 0x0010 /* Command Completed Interrupt Enable */
+#define PCI_EXP_SLTCTL_HPIE 0x0020 /* Hot-Plug Interrupt Enable */
+#define PCI_EXP_SLTCTL_AIC 0x00c0 /* Attention Indicator Control */
+#define PCI_EXP_SLTCTL_PIC 0x0300 /* Power Indicator Control */
+#define PCI_EXP_SLTCTL_PCC 0x0400 /* Power Controller Control */
+#define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */
+#define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */
+#define PCI_EXP_SLTSTA 26 /* Slot Status */
+#define PCI_EXP_SLTSTA_ABP 0x0001 /* Attention Button Pressed */
+#define PCI_EXP_SLTSTA_PFD 0x0002 /* Power Fault Detected */
+#define PCI_EXP_SLTSTA_MRLSC 0x0004 /* MRL Sensor Changed */
+#define PCI_EXP_SLTSTA_PDC 0x0008 /* Presence Detect Changed */
+#define PCI_EXP_SLTSTA_CC 0x0010 /* Command Completed */
+#define PCI_EXP_SLTSTA_MRLSS 0x0020 /* MRL Sensor State */
+#define PCI_EXP_SLTSTA_PDS 0x0040 /* Presence Detect State */
+#define PCI_EXP_SLTSTA_EIS 0x0080 /* Electromechanical Interlock Status */
+#define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link Layer State Changed */
+#define PCI_EXP_RTCTL 28 /* Root Control */
+#define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */
+#define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */
+#define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error on Fatal Error */
+#define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt Enable */
+#define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */
+#define PCI_EXP_RTCAP 30 /* Root Capabilities */
+#define PCI_EXP_RTSTA 32 /* Root Status */
+#define PCI_EXP_RTSTA_PME 0x10000 /* PME status */
+#define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */
+#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */
+#define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */
+#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */
+#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */
+#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */
+#define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */
+
+/* Extended Capabilities (PCI-X 2.0 and Express) */
+#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff)
+#define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf)
+#define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc)
+
+#define PCI_EXT_CAP_ID_ERR 1
+#define PCI_EXT_CAP_ID_VC 2
+#define PCI_EXT_CAP_ID_DSN 3
+#define PCI_EXT_CAP_ID_PWR 4
+#define PCI_EXT_CAP_ID_VNDR 11
+#define PCI_EXT_CAP_ID_ACS 13
+#define PCI_EXT_CAP_ID_ARI 14
+#define PCI_EXT_CAP_ID_ATS 15
+#define PCI_EXT_CAP_ID_SRIOV 16
+
+/* Advanced Error Reporting */
+#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */
+#define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */
+#define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */
+#define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */
+#define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */
+#define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */
+#define PCI_ERR_UNC_COMP_ABORT 0x00008000 /* Completer Abort */
+#define PCI_ERR_UNC_UNX_COMP 0x00010000 /* Unexpected Completion */
+#define PCI_ERR_UNC_RX_OVER 0x00020000 /* Receiver Overflow */
+#define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */
+#define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */
+#define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */
+#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */
+ /* Same bits as above */
+#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */
+ /* Same bits as above */
+#define PCI_ERR_COR_STATUS 16 /* Correctable Error Status */
+#define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */
+#define PCI_ERR_COR_BAD_TLP 0x00000040 /* Bad TLP Status */
+#define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */
+#define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */
+#define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */
+#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */
+ /* Same bits as above */
+#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */
+#define PCI_ERR_CAP_FEP(x) ((x) & 31) /* First Error Pointer */
+#define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */
+#define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */
+#define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */
+#define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */
+#define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */
+#define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */
+/* Correctable Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001
+/* Non-fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002
+/* Fatal Err Reporting Enable */
+#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004
+#define PCI_ERR_ROOT_STATUS 48
+#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */
+/* Multi ERR_COR Received */
+#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002
+/* ERR_FATAL/NONFATAL Recevied */
+#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004
+/* Multi ERR_FATAL/NONFATAL Recevied */
+#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008
+#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First Fatal */
+#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */
+#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */
+#define PCI_ERR_ROOT_ERR_SRC 52 /* Error Source Identification */
+
+/* Virtual Channel */
+#define PCI_VC_PORT_REG1 4
+#define PCI_VC_PORT_REG2 8
+#define PCI_VC_PORT_CTRL 12
+#define PCI_VC_PORT_STATUS 14
+#define PCI_VC_RES_CAP 16
+#define PCI_VC_RES_CTRL 20
+#define PCI_VC_RES_STATUS 26
+
+/* Power Budgeting */
+#define PCI_PWR_DSR 4 /* Data Select Register */
+#define PCI_PWR_DATA 8 /* Data Register */
+#define PCI_PWR_DATA_BASE(x) ((x) & 0xff) /* Base Power */
+#define PCI_PWR_DATA_SCALE(x) (((x) >> 8) & 3) /* Data Scale */
+#define PCI_PWR_DATA_PM_SUB(x) (((x) >> 10) & 7) /* PM Sub State */
+#define PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */
+#define PCI_PWR_DATA_TYPE(x) (((x) >> 15) & 7) /* Type */
+#define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */
+#define PCI_PWR_CAP 12 /* Capability */
+#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */
+
+/*
+ * Hypertransport sub capability types
+ *
+ * Unfortunately there are both 3 bit and 5 bit capability types defined
+ * in the HT spec, catering for that is a little messy. You probably don't
+ * want to use these directly, just use pci_find_ht_capability() and it
+ * will do the right thing for you.
+ */
+#define HT_3BIT_CAP_MASK 0xE0
+#define HT_CAPTYPE_SLAVE 0x00 /* Slave/Primary link configuration */
+#define HT_CAPTYPE_HOST 0x20 /* Host/Secondary link configuration */
+
+#define HT_5BIT_CAP_MASK 0xF8
+#define HT_CAPTYPE_IRQ 0x80 /* IRQ Configuration */
+#define HT_CAPTYPE_REMAPPING_40 0xA0 /* 40 bit address remapping */
+#define HT_CAPTYPE_REMAPPING_64 0xA2 /* 64 bit address remapping */
+#define HT_CAPTYPE_UNITID_CLUMP 0x90 /* Unit ID clumping */
+#define HT_CAPTYPE_EXTCONF 0x98 /* Extended Configuration Space Access */
+#define HT_CAPTYPE_MSI_MAPPING 0xA8 /* MSI Mapping Capability */
+#define HT_MSI_FLAGS 0x02 /* Offset to flags */
+#define HT_MSI_FLAGS_ENABLE 0x1 /* Mapping enable */
+#define HT_MSI_FLAGS_FIXED 0x2 /* Fixed mapping only */
+#define HT_MSI_FIXED_ADDR 0x00000000FEE00000ULL /* Fixed addr */
+#define HT_MSI_ADDR_LO 0x04 /* Offset to low addr bits */
+#define HT_MSI_ADDR_LO_MASK 0xFFF00000 /* Low address bit mask */
+#define HT_MSI_ADDR_HI 0x08 /* Offset to high addr bits */
+#define HT_CAPTYPE_DIRECT_ROUTE 0xB0 /* Direct routing configuration */
+#define HT_CAPTYPE_VCSET 0xB8 /* Virtual Channel configuration */
+#define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */
+#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 hypertransport configuration */
+#define HT_CAPTYPE_PM 0xE0 /* Hypertransport powermanagement configuration */
+
+/* Alternative Routing-ID Interpretation */
+#define PCI_ARI_CAP 0x04 /* ARI Capability Register */
+#define PCI_ARI_CAP_MFVC 0x0001 /* MFVC Function Groups Capability */
+#define PCI_ARI_CAP_ACS 0x0002 /* ACS Function Groups Capability */
+#define PCI_ARI_CAP_NFN(x) (((x) >> 8) & 0xff) /* Next Function Number */
+#define PCI_ARI_CTRL 0x06 /* ARI Control Register */
+#define PCI_ARI_CTRL_MFVC 0x0001 /* MFVC Function Groups Enable */
+#define PCI_ARI_CTRL_ACS 0x0002 /* ACS Function Groups Enable */
+#define PCI_ARI_CTRL_FG(x) (((x) >> 4) & 7) /* Function Group */
+
+/* Address Translation Service */
+#define PCI_ATS_CAP 0x04 /* ATS Capability Register */
+#define PCI_ATS_CAP_QDEP(x) ((x) & 0x1f) /* Invalidate Queue Depth */
+#define PCI_ATS_MAX_QDEP 32 /* Max Invalidate Queue Depth */
+#define PCI_ATS_CTRL 0x06 /* ATS Control Register */
+#define PCI_ATS_CTRL_ENABLE 0x8000 /* ATS Enable */
+#define PCI_ATS_CTRL_STU(x) ((x) & 0x1f) /* Smallest Translation Unit */
+#define PCI_ATS_MIN_STU 12 /* shift of minimum STU block */
+
+/* Single Root I/O Virtualization */
+#define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */
+#define PCI_SRIOV_CAP_VFM 0x01 /* VF Migration Capable */
+#define PCI_SRIOV_CAP_INTR(x) ((x) >> 21) /* Interrupt Message Number */
+#define PCI_SRIOV_CTRL 0x08 /* SR-IOV Control */
+#define PCI_SRIOV_CTRL_VFE 0x01 /* VF Enable */
+#define PCI_SRIOV_CTRL_VFM 0x02 /* VF Migration Enable */
+#define PCI_SRIOV_CTRL_INTR 0x04 /* VF Migration Interrupt Enable */
+#define PCI_SRIOV_CTRL_MSE 0x08 /* VF Memory Space Enable */
+#define PCI_SRIOV_CTRL_ARI 0x10 /* ARI Capable Hierarchy */
+#define PCI_SRIOV_STATUS 0x0a /* SR-IOV Status */
+#define PCI_SRIOV_STATUS_VFM 0x01 /* VF Migration Status */
+#define PCI_SRIOV_INITIAL_VF 0x0c /* Initial VFs */
+#define PCI_SRIOV_TOTAL_VF 0x0e /* Total VFs */
+#define PCI_SRIOV_NUM_VF 0x10 /* Number of VFs */
+#define PCI_SRIOV_FUNC_LINK 0x12 /* Function Dependency Link */
+#define PCI_SRIOV_VF_OFFSET 0x14 /* First VF Offset */
+#define PCI_SRIOV_VF_STRIDE 0x16 /* Following VF Stride */
+#define PCI_SRIOV_VF_DID 0x1a /* VF Device ID */
+#define PCI_SRIOV_SUP_PGSIZE 0x1c /* Supported Page Sizes */
+#define PCI_SRIOV_SYS_PGSIZE 0x20 /* System Page Size */
+#define PCI_SRIOV_BAR 0x24 /* VF BAR0 */
+#define PCI_SRIOV_NUM_BARS 6 /* Number of VF BARs */
+#define PCI_SRIOV_VFM 0x3c /* VF Migration State Array Offset*/
+#define PCI_SRIOV_VFM_BIR(x) ((x) & 7) /* State BIR */
+#define PCI_SRIOV_VFM_OFFSET(x) ((x) & ~7) /* State Offset */
+#define PCI_SRIOV_VFM_UA 0x0 /* Inactive.Unavailable */
+#define PCI_SRIOV_VFM_MI 0x1 /* Dormant.MigrateIn */
+#define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */
+#define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */
+
+/* Access Control Service */
+#define PCI_ACS_CAP 0x04 /* ACS Capability Register */
+#define PCI_ACS_SV 0x01 /* Source Validation */
+#define PCI_ACS_TB 0x02 /* Translation Blocking */
+#define PCI_ACS_RR 0x04 /* P2P Request Redirect */
+#define PCI_ACS_CR 0x08 /* P2P Completion Redirect */
+#define PCI_ACS_UF 0x10 /* Upstream Forwarding */
+#define PCI_ACS_EC 0x20 /* P2P Egress Control */
+#define PCI_ACS_DT 0x40 /* Direct Translated P2P */
+#define PCI_ACS_CTRL 0x06 /* ACS Control Register */
+#define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */
+
+#endif /* LINUX_PCI_REGS_H */
--
1.7.8.3
More information about the barebox
mailing list