April 2025 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue Apr 1 00:30:43 PDT 2025
Ending: Wed Apr 30 09:43:34 PDT 2025
Messages: 568

• [PATCH 1/1] phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking   Wayne Chang
• [PATCH v2 1/1] phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking   Wayne Chang
  • [PATCH v2 1/1] phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking   Jon Hunter
    • [PATCH v2 1/1] phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking   Wayne Chang
• [PATCH 0/2] Use devm_platform_ioremap_resource_byname in phy   shao.mingyin at zte.com.cn
  • [PATCH 1/2] phy: marvell: a3700-comphy: Use devm_platform_ioremap_resource_byname   shao.mingyin at zte.com.cn
  • [PATCH 2/2] phy: tegra: xusb: Use devm_platform_ioremap_resource_byname   shao.mingyin at zte.com.cn
  • [PATCH 1/2] phy: marvell: a3700-comphy: Use devm_platform_ioremap_resource_byname   Vinod Koul
• [PATCH 1/2] phy: marvell: a3700-comphy: Use devm_platform_ioremap_resource_byname   Miquel Raynal
• [PATCH] phy: freescale: fsl-samsung-hdmi: return closest rate instead LUT   Adam Ford
• [PATCH v6 1/2] phy: qcom: pcie: Determine has_nocsr_reset dynamically   Aleksandrs Vinarskis
• [PATCH v6 2/2] phy: qcom: qmp-pcie: Add PHY register retention support   Aleksandrs Vinarskis
• [PATCH v2 0/2] phy: usb: add support for bcm74110   Justin Chen
  • [PATCH v2 1/2] dt-bindings: phy: brcmstb-usb-phy: Add support for bcm74110   Justin Chen
    • [PATCH v2 1/2] dt-bindings: phy: brcmstb-usb-phy: Add support for bcm74110   Krzysztof Kozlowski
  • [PATCH v2 2/2] phy: usb: add support for bcm74110   Justin Chen
• [PATCH linux-next 0/5] Use dev_err_probe() in phy   shao.mingyin at zte.com.cn
  • [PATCH linux-next 1/5] phy: allwinner: phy-sun50i-usb3: Use dev_err_probe()   shao.mingyin at zte.com.cn
  • [PATCH linux-next 2/5] phy: broadcom: phy-bcm63xx-usbh: Use dev_err_probe()   shao.mingyin at zte.com.cn
  • [PATCH linux-next 3/5] phy: qualcomm: phy-qcom-ipq4019-usb: Use dev_err_probe()   shao.mingyin at zte.com.cn
  • [PATCH linux-next 4/5] phy: lantiq: phy-lantiq-rcu-usb2: Use dev_err_probe()   shao.mingyin at zte.com.cn
  • [PATCH linux-next 5/5] phy: rockchip: phy-rockchip-typec: Use dev_err_probe()   shao.mingyin at zte.com.cn
  • [PATCH linux-next 3/5] phy: qualcomm: phy-qcom-ipq4019-usb: Use dev_err_probe()   Dmitry Baryshkov
  • [PATCH linux-next 5/5] phy: rockchip: phy-rockchip-typec: Use dev_err_probe()   Sebastian Reichel
• [PATCH v2 2/2] phy: cadence: cdns-dphy: Update calibration wait time for startup state machine   Tomi Valkeinen
  • [PATCH v2 2/2] phy: cadence: cdns-dphy: Update calibration wait time for startup state machine   Devarsh Thakkar
    • [PATCH v2 2/2] phy: cadence: cdns-dphy: Update calibration wait time for startup state machine   Tomi Valkeinen
  • [PATCH v2 2/2] phy: cadence: cdns-dphy: Update calibration wait time for startup state machine   Devarsh Thakkar
• [PATCH v2 1/2] phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling   Tomi Valkeinen
  • [PATCH v2 1/2] phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling   Devarsh Thakkar
• [PATCH 03/18] drm/tidss: Add mode_fixup to adjust the clock based on HW   Tomi Valkeinen
• [PATCH v2 00/18] drm/bridge: cdns-dsi: Make it work a bit better   Tomi Valkeinen
  • [PATCH v2 01/18] drm/tidss: Fix missing includes and struct decls   Tomi Valkeinen
    • [PATCH v2 01/18] drm/tidss: Fix missing includes and struct decls   Aradhya Bhatia
  • [PATCH v2 02/18] drm/tidss: Use the crtc_* timings when programming the HW   Tomi Valkeinen
  • [PATCH v2 03/18] drm/tidss: Adjust the pclk based on the HW capabilities   Tomi Valkeinen
    • [PATCH v2 03/18] drm/tidss: Adjust the pclk based on the HW capabilities   Aradhya Bhatia
  • [PATCH v2 04/18] phy: cdns-dphy: Store hs_clk_rate and return it   Tomi Valkeinen
  • [PATCH v2 05/18] phy: cdns-dphy: Remove leftover code   Tomi Valkeinen
    • [PATCH v2 05/18] phy: cdns-dphy: Remove leftover code   Aradhya Bhatia
  • [PATCH v2 06/18] drm/bridge: cdns-dsi: Adjust mode to negative syncs   Tomi Valkeinen
  • [PATCH v2 07/18] drm/bridge: cdns-dsi: Fail if HS rate changed when validating PHY config   Tomi Valkeinen
    • [PATCH v2 07/18] drm/bridge: cdns-dsi: Fail if HS rate changed when validating PHY config   Aradhya Bhatia
  • [PATCH v2 08/18] drm/bridge: cdns-dsi: Clean up cdns_dsi_mode2cfg()   Tomi Valkeinen
    • [PATCH v2 08/18] drm/bridge: cdns-dsi: Clean up cdns_dsi_mode2cfg()   Aradhya Bhatia
  • [PATCH v2 09/18] drm/bridge: cdns-dsi: Fix REG_WAKEUP_TIME value   Tomi Valkeinen
  • [PATCH v2 10/18] drm/bridge: cdns-dsi: Fix event mode   Tomi Valkeinen
    • [PATCH v2 10/18] drm/bridge: cdns-dsi: Fix event mode   Jayesh Choudhary
  • [PATCH v2 11/18] drm/bridge: cdns-dsi: Remove broken fifo emptying check   Tomi Valkeinen
  • [PATCH v2 12/18] drm/bridge: cdns-dsi: Drop checks that shouldn't be in .mode_valid()   Tomi Valkeinen
    • [PATCH v2 12/18] drm/bridge: cdns-dsi: Drop checks that shouldn't be in .mode_valid()   Aradhya Bhatia
      • [PATCH v2 12/18] drm/bridge: cdns-dsi: Drop checks that shouldn't be in .mode_valid()   Tomi Valkeinen
      • [PATCH v2 12/18] drm/bridge: cdns-dsi: Drop checks that shouldn't be in .mode_valid()   Tomi Valkeinen
      • [PATCH v2 12/18] drm/bridge: cdns-dsi: Drop checks that shouldn't be in .mode_valid()   Aradhya Bhatia
  • [PATCH v2 13/18] drm/bridge: cdns-dsi: Do not use crtc_* values   Tomi Valkeinen
  • [PATCH v2 14/18] drm/bridge: cdns-dsi: Use videomode internally   Tomi Valkeinen
  • [PATCH v2 15/18] drm/bridge: cdns-dsi: Tune adjusted_mode->clock according to dsi needs   Tomi Valkeinen
  • [PATCH v2 16/18] drm/bridge: cdns-dsi: Update htotal in cdns_dsi_mode2cfg()   Tomi Valkeinen
  • [PATCH v2 17/18] drm/bridge: cdns-dsi: Drop cdns_dsi_adjust_phy_config()   Tomi Valkeinen
  • [PATCH v2 18/18] drm/bridge: cdns-dsi: Don't fail on MIPI_DSI_MODE_VIDEO_BURST   Tomi Valkeinen
  • [PATCH v2 00/18] drm/bridge: cdns-dsi: Make it work a bit better   Jayesh Choudhary
• [PATCH v3 0/2] phy: usb: add support for bcm74110   justin.chen at broadcom.com
  • [PATCH v3 1/2] dt-bindings: phy: brcmstb-usb-phy: Add support for bcm74110   justin.chen at broadcom.com
    • [PATCH v3 1/2] dt-bindings: phy: brcmstb-usb-phy: Add support for bcm74110   Florian Fainelli
    • [PATCH v3 1/2] dt-bindings: phy: brcmstb-usb-phy: Add support for bcm74110   Krzysztof Kozlowski
  • [PATCH v3 2/2] phy: usb: add support for bcm74110   justin.chen at broadcom.com
    • [PATCH v3 2/2] phy: usb: add support for bcm74110   Florian Fainelli
  • [PATCH v3 0/2] phy: usb: add support for bcm74110   Vinod Koul
• [PATCH linux-next 1/5] phy: allwinner: phy-sun50i-usb3: Use dev_err_probe()   Jernej Škrabec
• [PATCH] phy: tegra: xusb: Default otg mode to peripheral   Aaron Kling via B4 Relay
  • [PATCH] phy: tegra: xusb: Default otg mode to peripheral   Aaron Kling
    • [PATCH] phy: tegra: xusb: Default otg mode to peripheral   Aaron Kling
• [PATCH 1/2] phy: marvell: Do not enable by default during compile testing   Krzysztof Kozlowski
  • [PATCH 2/2] phy: samsung: Do not enable PHY_EXYNOS5_USBDRD by default during compile testing   Krzysztof Kozlowski
  • [PATCH 1/2] phy: marvell: Do not enable by default during compile testing   Vinod Koul
• [PATCH] dt-bindings: phy: rockchip: Add missing "phy-supply" property   Rob Herring (Arm)
  • [PATCH] dt-bindings: phy: rockchip: Add missing "phy-supply" property   Rob Herring (Arm)
• [PATCH] phy: qualcomm: phy-qcom-eusb2-repeater: rework reg override handler   Pengyu Luo
  • [PATCH] phy: qualcomm: phy-qcom-eusb2-repeater: rework reg override handler   Krzysztof Kozlowski
  • [PATCH] phy: qualcomm: phy-qcom-eusb2-repeater: rework reg override handler   Dmitry Baryshkov
  • [PATCH] phy: qualcomm: phy-qcom-eusb2-repeater: rework reg override handler   Rob Herring (Arm)
• [PATCH v2 2/6] phy: qcom-qmp-ufs: Add PHY Configuration support for sm8750   neil.armstrong at linaro.org
  • [PATCH v2 2/6] phy: qcom-qmp-ufs: Add PHY Configuration support for sm8750   Nitin Rawat
• [PATCH v2 1/2] phy: amlogic: meson8b-usb2: Use FIELD_PREP instead of _SHIFT macros   Anand Moon
• [PATCH v2 2/2] phy: amlogic: meson8b-usb2: Use the regmap_{clear,set}_bits helpers   Anand Moon
• [PATCH V1] phy: qcom-qmp-ufs: check for mode type for phy setting   Nitin Rawat
  • [PATCH V1] phy: qcom-qmp-ufs: check for mode type for phy setting   Vinod Koul
• [PATCH 0/7] Add USB3.0 PHY and host controller support for SpacemiT K1 SoC   Ze Huang
  • [PATCH 1/7] dt-bindings: phy: spacemit: add K1 USB2 PHY   Ze Huang
    • [PATCH 1/7] dt-bindings: phy: spacemit: add K1 USB2 PHY   Krzysztof Kozlowski
      • [PATCH 1/7] dt-bindings: phy: spacemit: add K1 USB2 PHY   Ze Huang
    • [PATCH 1/7] dt-bindings: phy: spacemit: add K1 USB2 PHY   Rob Herring (Arm)
  • [PATCH 2/7] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY   Ze Huang
    • [PATCH 2/7] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY   Krzysztof Kozlowski
      • [PATCH 2/7] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY   Ze Huang
  • [PATCH 3/7] dt-bindings: usb: add SpacemiT K1 DWC3 glue   Ze Huang
    • [PATCH 3/7] dt-bindings: usb: add SpacemiT K1 DWC3 glue   Krzysztof Kozlowski
      • [PATCH 3/7] dt-bindings: usb: add SpacemiT K1 DWC3 glue   Ze Huang
      • [PATCH 3/7] dt-bindings: usb: add SpacemiT K1 DWC3 glue   Krzysztof Kozlowski
    • [PATCH 3/7] dt-bindings: usb: add SpacemiT K1 DWC3 glue   Rob Herring (Arm)
      • [PATCH 3/7] dt-bindings: usb: add SpacemiT K1 DWC3 glue   Ze Huang
  • [PATCH 4/7] phy: spacemit: support K1 USB2.0 PHY controller   Ze Huang
    • [PATCH 4/7] phy: spacemit: support K1 USB2.0 PHY controller   Krzysztof Kozlowski
      • [PATCH 4/7] phy: spacemit: support K1 USB2.0 PHY controller   Ze Huang
  • [PATCH 5/7] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY   Ze Huang
    • [PATCH 5/7] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY   Krzysztof Kozlowski
      • [PATCH 5/7] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY   Ze Huang
      • [PATCH 5/7] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY   Krzysztof Kozlowski
    • [PATCH 5/7] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY   Pan Junzhong
      • [PATCH 5/7] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY   Ze Huang
  • [PATCH 6/7] usb: dwc3: add spacemit dwc3 glue layer driver   Ze Huang
    • [PATCH 6/7] usb: dwc3: add spacemit dwc3 glue layer driver   Thinh Nguyen
      • [PATCH 6/7] usb: dwc3: add spacemit dwc3 glue layer driver   Ze Huang
  • [PATCH 7/7] riscv: dts: spacemit: add usb3.0 support for K1   Ze Huang
• [PATCH 0/4] Add dsi support for mt8196   Bincai Liu
  • [PATCH 1/4] dt-bindings: soc: mediatek: add mipi yaml for MT8196   Bincai Liu
    • [PATCH 1/4] dt-bindings: soc: mediatek: add mipi yaml for MT8196   Conor Dooley
  • [PATCH 2/4] dt-bindings: soc: mediatek: add dsi yaml for MT8196   Bincai Liu
  • [PATCH 3/4] drm/mediatek: Add mipi dsi driver for mt8196   Bincai Liu
    • [PATCH 3/4] drm/mediatek: Add mipi dsi driver for mt8196   CK Hu (胡俊光)
  • [PATCH 4/4] drm/mediatek: dsi: Enable runtime PM   Bincai Liu
    • [PATCH 4/4] drm/mediatek: dsi: Enable runtime PM   CK Hu (胡俊光)
• [PATCH] phy: qcom-qusb2: Update the phy settings for IPQ5424   Kathiravan Thirumoorthy
  • [PATCH] phy: qcom-qusb2: Update the phy settings for IPQ5424   Dmitry Baryshkov
  • [PATCH] phy: qcom-qusb2: Update the phy settings for IPQ5424   Vinod Koul
    • [PATCH] phy: qcom-qusb2: Update the phy settings for IPQ5424   Kathiravan Thirumoorthy
      • [PATCH] phy: qcom-qusb2: Update the phy settings for IPQ5424   Vinod Koul
      • [PATCH] phy: qcom-qusb2: Update the phy settings for IPQ5424   Kathiravan Thirumoorthy
• (subset) [PATCH v3 00/15] arm64: dts: allwinner: Add basic Allwinner A523 support   Chen-Yu Tsai
• [PATCH v2] dt-bindings: phy: rockchip: Add missing "phy-supply" property   Rob Herring (Arm)
  • [PATCH v2] dt-bindings: phy: rockchip: Add missing "phy-supply" property   Heiko Stübner
  • [PATCH v2] dt-bindings: phy: rockchip: Add missing "phy-supply" property   Vinod Koul
• [PATCH 0/4] RK3576 USB Enablement   Nicolas Frattaroli
  • [PATCH 1/4] dt-bindings: phy: rockchip,inno-usb2phy: add port property   Nicolas Frattaroli
    • [PATCH 1/4] dt-bindings: phy: rockchip,inno-usb2phy: add port property   Rob Herring
      • [PATCH 1/4] dt-bindings: phy: rockchip,inno-usb2phy: add port property   Nicolas Frattaroli
      • [PATCH 1/4] dt-bindings: phy: rockchip,inno-usb2phy: add port property   Rob Herring
  • [PATCH 2/4] phy: rockchip: inno-usb2: add soft vbusvalid control   Nicolas Frattaroli
  • [PATCH 3/4] arm64: dts: rockchip: add phy suspend quirk to usb on rk3576   Nicolas Frattaroli
  • [PATCH 4/4] arm64: dts: rockchip: enable USB on Sige5   Nicolas Frattaroli
• [PATCH AUTOSEL 6.14 08/31] phy: qcom: qmp-pcie: Add X1P42100 Gen4x4 PHY   Sasha Levin
  • [PATCH AUTOSEL 6.14 08/31] phy: qcom: qmp-pcie: Add X1P42100 Gen4x4 PHY   Johan Hovold
    • [PATCH AUTOSEL 6.14 08/31] phy: qcom: qmp-pcie: Add X1P42100 Gen4x4 PHY   Sasha Levin
• [PATCH AUTOSEL 6.14 19/31] phy: rockchip: usbdp: Avoid call hpd_event_trigger in dp_phy_init   Sasha Levin
• [PATCH AUTOSEL 6.13 06/28] phy: qcom: qmp-pcie: Add X1P42100 Gen4x4 PHY   Sasha Levin
• [PATCH AUTOSEL 6.13 16/28] phy: rockchip: usbdp: Avoid call hpd_event_trigger in dp_phy_init   Sasha Levin
• [PATCH AUTOSEL 6.12 13/22] phy: rockchip: usbdp: Avoid call hpd_event_trigger in dp_phy_init   Sasha Levin
• [PATCH v3 06/10] phy: qcom: Add M31 based eUSB2 PHY driver   Wesley Cheng
• [PATCH V3 1/1] phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking   Wayne Chang
  • [PATCH V3 1/1] phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking   Jon Hunter
  • [PATCH V3 1/1] phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking   Vinod Koul
• AW: [PATCH v5 2/2] phy: Realtek Otto SerDes driver   markus.stockhausen at gmx.de
  • [PATCH v5 2/2] phy: Realtek Otto SerDes driver   Vinod Koul
• [PATCH v4 00/10] phy: qcom: Introduce USB support for SM8750   Melody Olvera
  • [PATCH v4 01/10] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Add SM8750 to QMP PHY   Melody Olvera
  • [PATCH v4 02/10] dt-bindings: phy: Add the M31 based eUSB2 PHY bindings   Melody Olvera
  • [PATCH v4 03/10] dt-bindings: usb: qcom,dwc3: Add SM8750 compatible   Melody Olvera
  • [PATCH v4 04/10] phy: qcom: qmp-combo: Add new PHY sequences for SM8750   Melody Olvera
    • [PATCH v4 04/10] phy: qcom: qmp-combo: Add new PHY sequences for SM8750   Dmitry Baryshkov
  • [PATCH v4 05/10] phy: qcom: Update description for QCOM based eUSB2 repeater   Melody Olvera
  • [PATCH v4 06/10] phy: qcom: Add M31 based eUSB2 PHY driver   Melody Olvera
    • [PATCH v4 06/10] phy: qcom: Add M31 based eUSB2 PHY driver   Dmitry Baryshkov
    • [PATCH v4 06/10] phy: qcom: Add M31 based eUSB2 PHY driver   Vinod Koul
      • [PATCH v4 06/10] phy: qcom: Add M31 based eUSB2 PHY driver   Wesley Cheng
  • [PATCH v4 07/10] arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs   Melody Olvera
  • [PATCH v4 08/10] arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform   Melody Olvera
  • [PATCH v4 09/10] arm64: dts: qcom: sm8750: Add USB support for SM8750 QRD platform   Melody Olvera
  • [PATCH v4 10/10] arm64: defconfig: Add M31 eUSB2 PHY config for SM8750   Melody Olvera
  • [PATCH v4 00/10] phy: qcom: Introduce USB support for SM8750   Rob Herring (Arm)
  • [PATCH v4 00/10] phy: qcom: Introduce USB support for SM8750   Dmitry Baryshkov
• [PATCH RESEND v2 0/3] Introduce USBDRD-PHY support for Exynos7870 SoC   Kaustabh Chakraborty
  • [PATCH RESEND v2 1/3] phy: exynos5-usbdrd: use GENMASK and FIELD_PREP for Exynos5 PHY registers   Kaustabh Chakraborty
  • [PATCH RESEND v2 2/3] dt-bindings: phy: samsung,usb3-drd-phy: add exynos7870-usbdrd-phy compatible   Kaustabh Chakraborty
  • [PATCH RESEND v2 3/3] phy: exynos5-usbdrd: add exynos7870 USBDRD support   Kaustabh Chakraborty
  • [PATCH RESEND v2 0/3] Introduce USBDRD-PHY support for Exynos7870 SoC   Vinod Koul
• [PATCH V3 0/9] Refactor phy powerup sequence   Nitin Rawat
  • [PATCH V3 2/9] phy: qcom-qmp-ufs: Rename qmp_ufs_enable and qmp_ufs_power_on   Nitin Rawat
    • [PATCH V3 2/9] phy: qcom-qmp-ufs: Rename qmp_ufs_enable and qmp_ufs_power_on   Dmitry Baryshkov
  • [PATCH V3 3/9] phy: qcom-qmp-ufs: Refactor phy_power_on and phy_calibrate callbacks   Nitin Rawat
    • [PATCH V3 3/9] phy: qcom-qmp-ufs: Refactor phy_power_on and phy_calibrate callbacks   Dmitry Baryshkov
  • [PATCH V3 4/9] phy: qcom-qmp-ufs: Refactor UFS PHY reset   Nitin Rawat
    • [PATCH V3 4/9] phy: qcom-qmp-ufs: Refactor UFS PHY reset   Dmitry Baryshkov
      • [PATCH V3 4/9] phy: qcom-qmp-ufs: Refactor UFS PHY reset   Nitin Rawat
      • [PATCH V3 4/9] phy: qcom-qmp-ufs: Refactor UFS PHY reset   Dmitry Baryshkov
      • [PATCH V3 4/9] phy: qcom-qmp-ufs: Refactor UFS PHY reset   Nitin Rawat
      • [PATCH V3 4/9] phy: qcom-qmp-ufs: Refactor UFS PHY reset   Dmitry Baryshkov
      • [PATCH V3 4/9] phy: qcom-qmp-ufs: Refactor UFS PHY reset   Nitin Rawat
      • [PATCH V3 4/9] phy: qcom-qmp-ufs: Refactor UFS PHY reset   Dmitry Baryshkov
      • [PATCH V3 4/9] phy: qcom-qmp-ufs: Refactor UFS PHY reset   Nitin Rawat
      • [PATCH V3 4/9] phy: qcom-qmp-ufs: Refactor UFS PHY reset   Konrad Dybcio
      • [PATCH V3 4/9] phy: qcom-qmp-ufs: Refactor UFS PHY reset   Konrad Dybcio
      • [PATCH V3 4/9] phy: qcom-qmp-ufs: Refactor UFS PHY reset   Nitin Rawat
      • [PATCH V3 4/9] phy: qcom-qmp-ufs: Refactor UFS PHY reset   Konrad Dybcio
      • [PATCH V3 4/9] phy: qcom-qmp-ufs: Refactor UFS PHY reset   Dmitry Baryshkov
  • [PATCH V3 5/9] phy: qcom-qmp-ufs: Remove qmp_ufs_com_init()   Nitin Rawat
    • [PATCH V3 5/9] phy: qcom-qmp-ufs: Remove qmp_ufs_com_init()   Dmitry Baryshkov
      • [PATCH V3 5/9] phy: qcom-qmp-ufs: Remove qmp_ufs_com_init()   Nitin Rawat
      • [PATCH V3 5/9] phy: qcom-qmp-ufs: Remove qmp_ufs_com_init()   Dmitry Baryshkov
      • [PATCH V3 5/9] phy: qcom-qmp-ufs: Remove qmp_ufs_com_init()   Nitin Rawat
      • [PATCH V3 5/9] phy: qcom-qmp-ufs: Remove qmp_ufs_com_init()   Dmitry Baryshkov
      • [PATCH V3 5/9] phy: qcom-qmp-ufs: Remove qmp_ufs_com_init()   Nitin Rawat
      • [PATCH V3 5/9] phy: qcom-qmp-ufs: Remove qmp_ufs_com_init()   Dmitry Baryshkov
  • [PATCH V3 6/9] phy: qcom-qmp-ufs: Refactor qmp_ufs_exit callback.   Nitin Rawat
    • [PATCH V3 6/9] phy: qcom-qmp-ufs: Refactor qmp_ufs_exit callback.   Konrad Dybcio
  • [PATCH V3 7/9] scsi: ufs: qcom : Refactor phy_power_on/off calls   Nitin Rawat
  • [PATCH V3 8/9] scsi: ufs: qcom : Introduce phy_power_on/off wrapper function   Nitin Rawat
  • [PATCH V3 9/9] scsi: ufs: qcom: Prevent calling phy_exit before phy_init   Nitin Rawat
  • [PATCH V3 0/9] Refactor phy powerup sequence   Dmitry Baryshkov
    • [PATCH V3 0/9] Refactor phy powerup sequence   Nitin Rawat
• [PATCH V3 1/9] scsi: ufs: qcom: add a new phy calibrate API call   Nitin Rawat
  • [PATCH V3 1/9] scsi: ufs: qcom: add a new phy calibrate API call   Konrad Dybcio
    • [PATCH V3 1/9] scsi: ufs: qcom: add a new phy calibrate API call   Nitin Rawat
• [PATCH V2 3/6] phy: qcom-qmp-ufs: Refactor UFS PHY reset   Nitin Rawat
  • [PATCH V2 3/6] phy: qcom-qmp-ufs: Refactor UFS PHY reset   Nitin Rawat
• [PATCH V2 2/6] phy: qcom-qmp-ufs: Refactor phy_power_on and phy_calibrate callbacks   Nitin Rawat
  • [PATCH V2 2/6] phy: qcom-qmp-ufs: Refactor phy_power_on and phy_calibrate callbacks   Dmitry Baryshkov
• [PATCH v1 0/6] Messon: Simplify error handling with dev_err_probe()   Anand Moon
  • [PATCH v1 1/6] phy: amlogic: phy-meson-gxl-usb2: Simplify error handling with dev_err_probe()   Anand Moon
    • [PATCH v1 1/6] phy: amlogic: phy-meson-gxl-usb2: Simplify error handling with dev_err_probe()   Neil Armstrong
  • [PATCH v1 2/6] phy: amlogic: phy-meson-g12a-usb2: Simplify error handling with dev_err_probe()   Anand Moon
    • [PATCH v1 2/6] phy: amlogic: phy-meson-g12a-usb2: Simplify error handling with dev_err_probe()   Neil Armstrong
  • [PATCH v1 3/6] phy: amlogic: phy-meson-axg-mipi-pcie-analog: Simplify error handling with dev_err_probe()   Anand Moon
    • [PATCH v1 3/6] phy: amlogic: phy-meson-axg-mipi-pcie-analog: Simplify error handling with dev_err_probe()   Neil Armstrong
  • [PATCH v1 4/6] phy: amlogic: phy-meson-axg-mipi-dphy: Simplify error handling with dev_err_probe()   Anand Moon
    • [PATCH v1 4/6] phy: amlogic: phy-meson-axg-mipi-dphy: Simplify error handling with dev_err_probe()   Neil Armstrong
  • [PATCH v1 5/6] phy: amlogic: phy-meson-axg-pcie: Simplify error handling with dev_err_probe()   Anand Moon
    • [PATCH v1 5/6] phy: amlogic: phy-meson-axg-pcie: Simplify error handling with dev_err_probe()   Neil Armstrong
  • [PATCH v1 6/6] phy: amlogic: phy-meson-axg-pcie: Fix PHY creation order in axg-pcie probe   Anand Moon
    • [PATCH v1 6/6] phy: amlogic: phy-meson-axg-pcie: Fix PHY creation order in axg-pcie probe   Neil Armstrong
  • [PATCH v1 0/6] Messon: Simplify error handling with dev_err_probe()   Vinod Koul
• [PATCH V2 6/6] scsi: ufs: host : Introduce phy_power_on/off wrapper function   Nitin Rawat
• [PATCH] dt-bindings: phy: cadence-torrent: enable PHY_TYPE_USXGMII   Siddharth Vadapalli
  • [PATCH] dt-bindings: phy: cadence-torrent: enable PHY_TYPE_USXGMII   Rob Herring (Arm)
• [PATCH v6 0/2] phy: qcom: qmp-pcie: Add PCIe PHY no_csr reset support   Vinod Koul
  • [PATCH v6 0/2] phy: qcom: qmp-pcie: Add PCIe PHY no_csr reset support   Vinod Koul
• [PATCH v7 0/2] phy: qcom: qmp-pcie: Add PCIe PHY no_csr reset support   Wenbin Yao
  • [PATCH v7 1/2] phy: qcom: pcie: Determine has_nocsr_reset dynamically   Wenbin Yao
  • [PATCH v7 2/2] phy: qcom: qmp-pcie: Add PHY register retention support   Wenbin Yao
  • [PATCH v7 0/2] phy: qcom: qmp-pcie: Add PCIe PHY no_csr reset support   Vinod Koul
• [PATCH v2] phy: can-transceiver: Re-instate "mux-states" property presence check   Vinod Koul
• [PATCH next] phy: rockchip-samsung-dcphy: Add missing assignment   Vinod Koul
• [PATCH v2 0/2] phy: amlogic: meson8b-usb2: two small cleanup patches   Vinod Koul
• (subset) [PATCH v7 0/6] Enable IPQ5018 PCI support   Vinod Koul
• [PATCH v6 00/14] phy: rockchip: samsung-hdptx: Support high color depth management   Vinod Koul
• [PATCH RESEND] phy: cadence: Sierra: Add multilink SGMII + SGMII register configuration   Bartosz Wawrzyniak
• [PATCH v4 00/10] phy: samsung: add Exynos2200 SNPS eUSB2 driver   Ivaylo Ivanov
  • [PATCH v4 01/10] dt-bindings: phy: add exynos2200 eusb2 phy support   Ivaylo Ivanov
    • [PATCH v4 01/10] dt-bindings: phy: add exynos2200 eusb2 phy support   Krzysztof Kozlowski
  • [PATCH v4 02/10] dt-bindings: phy: samsung,usb3-drd-phy: add exynos2200 support   Ivaylo Ivanov
    • [PATCH v4 02/10] dt-bindings: phy: samsung,usb3-drd-phy: add exynos2200 support   Krzysztof Kozlowski
  • [PATCH v4 03/10] phy: move phy-qcom-snps-eusb2 out of its vendor sub-directory   Ivaylo Ivanov
  • [PATCH v4 04/10] phy: phy-snps-eusb2: refactor constructs names   Ivaylo Ivanov
  • [PATCH v4 05/10] phy: phy-snps-eusb2: split phy init code   Ivaylo Ivanov
  • [PATCH v4 06/10] phy: phy-snps-eusb2: make repeater optional   Ivaylo Ivanov
  • [PATCH v4 07/10] phy: phy-snps-eusb2: make reset control optional   Ivaylo Ivanov
  • [PATCH v4 08/10] phy: phy-snps-eusb2: refactor reference clock init   Ivaylo Ivanov
  • [PATCH v4 09/10] phy: phy-snps-eusb2: add support for exynos2200   Ivaylo Ivanov
  • [PATCH v4 10/10] phy: exynos5-usbdrd: support Exynos USBDRD 3.2 4nm controller   Ivaylo Ivanov
• [RFC 0/5] Add mt7988 XS-PHY   Frank Wunderlich
  • [RFC 1/5] dt-bindings: phy: mtk-xs-phy: Add mt7988 compatible   Frank Wunderlich
  • [RFC 2/5] dt-bindings: phy: mtk-xs-phy: support type switch by pericfg   Frank Wunderlich
  • [RFC 3/5] dt-bindings: power: Add binding for MediaTek MT7988 topmisc power controller   Frank Wunderlich
    • [RFC 3/5] dt-bindings: power: Add binding for MediaTek MT7988 topmisc power controller   Rob Herring (Arm)
    • [RFC 3/5] dt-bindings: power: Add binding for MediaTek MT7988 topmisc power controller   AngeloGioacchino Del Regno
      • Re: [RFC 3/5] dt-bindings: power: Add binding for MediaTek MT7988 topmisc power controller   Frank Wunderlich
      • [RFC 3/5] dt-bindings: power: Add binding for MediaTek MT7988 topmisc power controller   AngeloGioacchino Del Regno
      • Re: [RFC 3/5] dt-bindings: power: Add binding for MediaTek MT7988 topmisc power controller   Frank Wunderlich
      • Re: [RFC 3/5] dt-bindings: power: Add binding for MediaTek MT7988 topmisc power controller   Frank Wunderlich
      • [RFC 3/5] dt-bindings: power: Add binding for MediaTek MT7988 topmisc power controller   AngeloGioacchino Del Regno
  • [RFC 4/5] phy: mediatek: xsphy: support type switch by pericfg   Frank Wunderlich
    • [RFC 4/5] phy: mediatek: xsphy: support type switch by pericfg   AngeloGioacchino Del Regno
  • [RFC 5/5] arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2   Frank Wunderlich
    • [RFC 5/5] arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2   AngeloGioacchino Del Regno
      • Re: [RFC 5/5] arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2   Frank Wunderlich
• [PATCH] phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug   Chenyuan Yang
  • [PATCH] phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug   Johan Hovold
  • [PATCH] phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug   Krzysztof Kozlowski
    • [PATCH] phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug   Johan Hovold
      • [PATCH] phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug   Krzysztof Kozlowski
      • [PATCH] phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug   Johan Hovold
      • [PATCH] phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug   Chenyuan Yang
• [PATCH v9 00/19] Add Freescale i.MX8qxp Display Controller support   Liu Ying
  • [PATCH v9 01/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller processing units   Liu Ying
  • [PATCH v9 02/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller blit engine   Liu Ying
  • [PATCH v9 03/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller display engine   Liu Ying
  • [PATCH v9 04/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller pixel engine   Liu Ying
  • [PATCH v9 05/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller AXI performance counter   Liu Ying
  • [PATCH v9 06/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller command sequencer   Liu Ying
  • [PATCH v9 07/19] dt-bindings: interrupt-controller: Add i.MX8qxp Display Controller interrupt controller   Liu Ying
  • [PATCH v9 08/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller   Liu Ying
  • [PATCH v9 09/19] drm/imx: Add i.MX8qxp Display Controller display engine   Liu Ying
  • [PATCH v9 10/19] drm/imx: Add i.MX8qxp Display Controller pixel engine   Liu Ying
  • [PATCH v9 11/19] drm/imx: Add i.MX8qxp Display Controller interrupt controller   Liu Ying
  • [PATCH v9 12/19] drm/imx: Add i.MX8qxp Display Controller KMS   Liu Ying
  • [PATCH v9 13/19] MAINTAINERS: Add maintainer for i.MX8qxp Display Controller   Liu Ying
  • [DO NOT MERGE PATCH v9 14/19] dt-bindings: phy: mixel, mipi-dsi-phy: Allow assigned-clock* properties   Liu Ying
  • [DO NOT MERGE PATCH v9 15/19] dt-bindings: firmware: imx: Add SCU controlled display pixel link nodes   Liu Ying
  • [DO NOT MERGE PATCH v9 16/19] arm64: dts: imx8qxp: Add display controller subsystem   Liu Ying
  • [DO NOT MERGE PATCH v9 17/19] arm64: dts: imx8qxp: Add MIPI-LVDS combo subsystems   Liu Ying
  • [DO NOT MERGE PATCH v9 18/19] arm64: dts: imx8qxp-mek: Enable display controller   Liu Ying
  • [DO NOT MERGE PATCH v9 19/19] arm64: dts: imx8qxp-mek: Add MX8-DLVDS-LCD1 display module support   Liu Ying
• [PATCH v3 00/17] drm/bridge: cdns-dsi: Make it work a bit better   Tomi Valkeinen
  • [PATCH v3 01/17] drm/tidss: Fix missing includes and struct decls   Tomi Valkeinen
  • [PATCH v3 02/17] drm/tidss: Use the crtc_* timings when programming the HW   Tomi Valkeinen
    • [PATCH v3 02/17] drm/tidss: Use the crtc_* timings when programming the HW   Aradhya Bhatia
  • [PATCH v3 03/17] drm/tidss: Adjust the pclk based on the HW capabilities   Tomi Valkeinen
  • [PATCH v3 04/17] phy: cdns-dphy: Store hs_clk_rate and return it   Tomi Valkeinen
    • [PATCH v3 04/17] phy: cdns-dphy: Store hs_clk_rate and return it   Aradhya Bhatia
  • [PATCH v3 05/17] phy: cdns-dphy: Remove leftover code   Tomi Valkeinen
  • [PATCH v3 06/17] drm/bridge: cdns-dsi: Remove extra line at the end of the file   Tomi Valkeinen
    • [PATCH v3 06/17] drm/bridge: cdns-dsi: Remove extra line at the end of the file   Aradhya Bhatia
  • [PATCH v3 07/17] drm/bridge: cdns-dsi: Drop crtc_* code   Tomi Valkeinen
  • [PATCH v3 08/17] drm/bridge: cdns-dsi: Remove broken fifo emptying check   Tomi Valkeinen
  • [PATCH v3 09/17] drm/bridge: cdns-dsi: Drop checks that shouldn't be in .mode_valid()   Tomi Valkeinen
    • [PATCH v3 09/17] drm/bridge: cdns-dsi: Drop checks that shouldn't be in .mode_valid()   Aradhya Bhatia
  • [PATCH v3 10/17] drm/bridge: cdns-dsi: Update htotal in cdns_dsi_mode2cfg()   Tomi Valkeinen
    • [PATCH v3 10/17] drm/bridge: cdns-dsi: Update htotal in cdns_dsi_mode2cfg()   Aradhya Bhatia
  • [PATCH v3 11/17] drm/bridge: cdns-dsi: Drop cdns_dsi_adjust_phy_config()   Tomi Valkeinen
  • [PATCH v3 12/17] drm/bridge: cdns-dsi: Adjust mode to negative syncs   Tomi Valkeinen
    • [PATCH v3 12/17] drm/bridge: cdns-dsi: Adjust mode to negative syncs   Aradhya Bhatia
  • [PATCH v3 13/17] drm/bridge: cdns-dsi: Fix REG_WAKEUP_TIME value   Tomi Valkeinen
    • [PATCH v3 13/17] drm/bridge: cdns-dsi: Fix REG_WAKEUP_TIME value   Aradhya Bhatia
      • [PATCH v3 13/17] drm/bridge: cdns-dsi: Fix REG_WAKEUP_TIME value   Tomi Valkeinen
  • [PATCH v3 14/17] drm/bridge: cdns-dsi: Use video mode and clean up cdns_dsi_mode2cfg()   Tomi Valkeinen
    • [PATCH v3 14/17] drm/bridge: cdns-dsi: Use video mode and clean up cdns_dsi_mode2cfg()   Aradhya Bhatia
      • [PATCH v3 14/17] drm/bridge: cdns-dsi: Use video mode and clean up cdns_dsi_mode2cfg()   Tomi Valkeinen
  • [PATCH v3 15/17] drm/bridge: cdns-dsi: Fix event mode   Tomi Valkeinen
  • [PATCH v3 16/17] drm/bridge: cdns-dsi: Tune adjusted_mode->clock according to dsi needs   Tomi Valkeinen
    • [PATCH v3 16/17] drm/bridge: cdns-dsi: Tune adjusted_mode->clock according to dsi needs   Aradhya Bhatia
      • [PATCH v3 16/17] drm/bridge: cdns-dsi: Tune adjusted_mode->clock according to dsi needs   Tomi Valkeinen
  • [PATCH v3 17/17] drm/bridge: cdns-dsi: Don't fail on MIPI_DSI_MODE_VIDEO_BURST   Tomi Valkeinen
  • [PATCH v3 00/17] drm/bridge: cdns-dsi: Make it work a bit better   Parth Panchoil
• [PATCH RESEND 0/2] phy: core: Remove 2 APIs   Zijun Hu
  • [PATCH RESEND 1/2] phy: core: Remove API devm_of_phy_provider_unregister()   Zijun Hu
  • [PATCH RESEND 2/2] phy: core: Remove API devm_phy_destroy()   Zijun Hu
• [PATCH v2 0/2] Reuse the IPQ6018 QUSB2 PHY settings for IPQ5424   Kathiravan Thirumoorthy
  • [PATCH v2 1/2] Revert "phy: qcom-qusb2: add QUSB2 support for IPQ5424"   Kathiravan Thirumoorthy
    • [PATCH v2 1/2] Revert "phy: qcom-qusb2: add QUSB2 support for IPQ5424"   Mukesh Kumar Savaliya
      • [PATCH v2 1/2] Revert "phy: qcom-qusb2: add QUSB2 support for IPQ5424"   Kathiravan Thirumoorthy
  • [PATCH v2 2/2] phy: qcom-qusb2: reuse the IPQ6018 settings for IPQ5424   Kathiravan Thirumoorthy
    • [PATCH v2 2/2] phy: qcom-qusb2: reuse the IPQ6018 settings for IPQ5424   Mukesh Kumar Savaliya
  • [PATCH v2 0/2] Reuse the IPQ6018 QUSB2 PHY settings for IPQ5424   Mukesh Kumar Savaliya
• [PATCH v2] phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug   Chenyuan Yang
  • [PATCH v2] phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug   Johan Hovold
  • [PATCH v2] phy: qcom-qmp-usb: Fix an NULL vs IS_ERR() bug   Dmitry Baryshkov
• [PATCH 0/4] Add USB2.0 PHY support for RZ/V2H(P) SoC   Prabhakar
  • [PATCH 1/4] dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family   Prabhakar
    • [PATCH 1/4] dt-bindings: phy: renesas,usb2-phy: Add clock constraint for RZ/G2L family   Rob Herring (Arm)
  • [PATCH 2/4] dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC   Prabhakar
    • [PATCH 2/4] dt-bindings: phy: renesas,usb2-phy: Document RZ/V2H(P) SoC   Rob Herring (Arm)
  • [PATCH 3/4] phy: renesas: phy-rcar-gen3-usb2: Sort compatible entries by SoC part number   Prabhakar
  • [PATCH 4/4] phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/V2H(P)   Prabhakar
• [PATCH] dt-bindings: phy: rockchip: Convert RK3399 PCIe PHY to schema   Rob Herring (Arm)
  • [PATCH] dt-bindings: phy: rockchip: Convert RK3399 PCIe PHY to schema   Rob Herring (Arm)
  • [PATCH] dt-bindings: phy: rockchip: Convert RK3399 PCIe PHY to schema   Rob Herring
• [PATCH] dt-bindings: phy: rockchip: Convert RK3399 Type-C PHY to schema   Rob Herring (Arm)
  • [PATCH] dt-bindings: phy: rockchip: Convert RK3399 Type-C PHY to schema   Rob Herring (Arm)
  • [PATCH] dt-bindings: phy: rockchip: Convert RK3399 Type-C PHY to schema   kernel test robot
• [PATCH v2] dt-bindings: phy: rockchip: Convert RK3399 PCIe PHY to schema   Rob Herring (Arm)
• [PATCH v3 0/2] Reuse the IPQ6018 QUSB2 PHY settings for IPQ5424   Kathiravan Thirumoorthy
  • [PATCH v3 1/2] Revert "phy: qcom-qusb2: add QUSB2 support for IPQ5424"   Kathiravan Thirumoorthy
  • [PATCH v3 2/2] phy: qcom-qusb2: reuse the IPQ6018 settings for IPQ5424   Kathiravan Thirumoorthy
    • [PATCH v3 2/2] phy: qcom-qusb2: reuse the IPQ6018 settings for IPQ5424   Dmitry Baryshkov
  • [PATCH v3 0/2] Reuse the IPQ6018 QUSB2 PHY settings for IPQ5424   Kathiravan Thirumoorthy
• [PATCH v2 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3562   Kever Yang
  • [PATCH v2 1/2] dt-bindings: phy: rockchip,inno-usb2phy: add rk3562   Krzysztof Kozlowski
• [PATCH v2 2/2] phy: rockchip: inno-usb2: Add usb2 phy support for rk3562   Kever Yang
• [PATCH] phy: rockchip: samsung-hdptx: Remove unneeded semicolon   Chen Ni
• [PATCH v3 0/8] Add Bananapi R4 variants and add xsphy   Frank Wunderlich
  • [PATCH v3 1/8] dt-bindings: arm: mediatek: add bpi-r4 2g5 phy variant   Frank Wunderlich
    • [PATCH v3 1/8] dt-bindings: arm: mediatek: add bpi-r4 2g5 phy variant   Krzysztof Kozlowski
  • [PATCH v3 2/8] arm64: dts: mediatek: mt7988a-bpi-r4: allow hw variants of bpi-r4   Frank Wunderlich
  • [PATCH v3 3/8] dt-bindings: phy: mtk-xs-phy: Add mt7988 compatible   Frank Wunderlich
    • [PATCH v3 3/8] dt-bindings: phy: mtk-xs-phy: Add mt7988 compatible   Krzysztof Kozlowski
  • [PATCH v3 4/8] dt-bindings: phy: mtk-xs-phy: support type switch by pericfg   Frank Wunderlich
    • [PATCH v3 4/8] dt-bindings: phy: mtk-xs-phy: support type switch by pericfg   Krzysztof Kozlowski
      • [PATCH v3 4/8] dt-bindings: phy: mtk-xs-phy: support type switch by pericfg   Frank Wunderlich (linux)
      • [PATCH v3 4/8] dt-bindings: phy: mtk-xs-phy: support type switch by pericfg   Krzysztof Kozlowski
      • [PATCH v3 4/8] dt-bindings: phy: mtk-xs-phy: support type switch by pericfg   Frank Wunderlich (linux)
      • [PATCH v3 4/8] dt-bindings: phy: mtk-xs-phy: support type switch by pericfg   Krzysztof Kozlowski
  • [PATCH v3 5/8] dt-bindings: mfd: syscon: Add mt7988-topmisc   Frank Wunderlich
  • [PATCH v3 6/8] phy: mediatek: xsphy: support type switch by pericfg   Frank Wunderlich
  • [PATCH v3 7/8] arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2   Frank Wunderlich
  • [PATCH v3 8/8] arm64: dts: mediatek: mt7988a-bpi-r4: enable xsphy   Frank Wunderlich
• [PATCH v2 0/2] phy: qualcomm: phy-qcom-eusb2-repeater: rework reg override handler   Pengyu Luo
  • [PATCH v2 1/2] dt-bindings: phy: qcom,snps-eusb2-repeater: Add more tuning overrides   Pengyu Luo
    • [PATCH v2 1/2] dt-bindings: phy: qcom,snps-eusb2-repeater: Add more tuning overrides   Rob Herring
  • [PATCH v2 2/2] phy: qualcomm: phy-qcom-eusb2-repeater: rework reg override handler   Pengyu Luo
    • [PATCH v2 2/2] phy: qualcomm: phy-qcom-eusb2-repeater: rework reg override handler   Dmitry Baryshkov
      • [PATCH v2 2/2] phy: qualcomm: phy-qcom-eusb2-repeater: rework reg override handler   Pengyu Luo
      • [PATCH v2 2/2] phy: qualcomm: phy-qcom-eusb2-repeater: rework reg override handler   Dmitry Baryshkov
      • [PATCH v2 2/2] phy: qualcomm: phy-qcom-eusb2-repeater: rework reg override handler   Pengyu Luo
• [PATCH 1/2] dt-bindings: phy: mediatek,dsi-phy: Add support for MT6893   AngeloGioacchino Del Regno
  • [PATCH 2/2] dt-bindings: phy: mediatek,tphy: Add support for MT6893   AngeloGioacchino Del Regno
    • [PATCH 2/2] dt-bindings: phy: mediatek,tphy: Add support for MT6893   Rob Herring (Arm)
  • [PATCH 1/2] dt-bindings: phy: mediatek,dsi-phy: Add support for MT6893   Rob Herring (Arm)
• [PATCH v2] dt-bindings: phy: rockchip: Convert RK3399 Type-C PHY to schema   Rob Herring (Arm)
  • [PATCH v2] dt-bindings: phy: rockchip: Convert RK3399 Type-C PHY to schema   Greg Kroah-Hartman
• [PATCH v6 0/2] phy: Realtek Otto SerDes: add new driver   Markus Stockhausen
• [PATCH v6 1/2] dt-bindings: phy: add realtek,rtl8380m-serdes   Markus Stockhausen
• [PATCH v6 2/2] phy: Realtek Otto SerDes driver   Markus Stockhausen
• [PATCH] phy-zynqmp: Postpone getting clock rate until actually needed   Mike Looijmans
  • [PATCH] phy-zynqmp: Postpone getting clock rate until actually needed   Laurent Pinchart
    • [PATCH] phy-zynqmp: Postpone getting clock rate until actually needed   Mike Looijmans
      • [PATCH] phy-zynqmp: Postpone getting clock rate until actually needed   Laurent Pinchart
      • [PATCH] phy-zynqmp: Postpone getting clock rate until actually needed   Mike Looijmans
• [PATCH 0/5] eDP driver for mt8196   Bincai Liu
  • [PATCH 3/5] drm/mediatek: Add dvo driver for mt8196   Bincai Liu
    • [PATCH 3/5] drm/mediatek: Add dvo driver for mt8196   kernel test robot
    • [PATCH 3/5] drm/mediatek: Add dvo driver for mt8196   kernel test robot
  • [PATCH 4/5] drm/mediatek: Add eDP driver for mt8196   Bincai Liu
  • [PATCH 5/5] drm/mediatek: Add eDP phy driver for mt8196   Bincai Liu
    • [PATCH 5/5] drm/mediatek: Add eDP phy driver for mt8196   Vinod Koul
• [PATCH 1/5] dt-bindings: eDP: mediatek: add eDP yaml for mt8196   Bincai Liu
  • [PATCH 1/5] dt-bindings: eDP: mediatek: add eDP yaml for mt8196   CK Hu (胡俊光)
• [PATCH 2/5] dt-bindings: dvo: mediatek: add dvo yaml for mt8196   Bincai Liu
  • [PATCH 2/5] dt-bindings: dvo: mediatek: add dvo yaml for mt8196   CK Hu (胡俊光)
• [PATCH v2 0/4] Add USB2.0 PHY and USB3.0 PHY support for SpacemiT K1   Ze Huang
  • [PATCH v2 2/4] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY   Ze Huang
    • [PATCH v2 2/4] dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY   Rob Herring (Arm)
  • [PATCH v2 3/4] phy: spacemit: support K1 USB2.0 PHY controller   Ze Huang
  • [PATCH v2 4/4] phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY   Ze Huang
• [PATCH v2 1/4] dt-bindings: phy: spacemit: add K1 USB2 PHY   Ze Huang
• [PATCH v7 3/6] dt-bindings: PCI: qcom: Add IPQ5018 SoC   Manivannan Sadhasivam
• [PATCH v7 4/6] PCI: qcom: Add support for IPQ5018   Manivannan Sadhasivam
• [PATCH v2 0/2] USB PHY support for Exynos990 SoCs   Igor Belwon
  • [PATCH v2 1/2] dt-bindings: phy: samsung,usb3-drd-phy: Add exynos990 compatible   Igor Belwon
  • [PATCH v2 2/2] phy: exynos5-usbdrd: Add support for the Exynos990 usbdrd phy   Igor Belwon
• [PATCH v5 00/10] phy: qcom: Introduce USB support for SM8750   Melody Olvera
  • [PATCH v5 09/10] arm64: dts: qcom: sm8750: Add USB support for SM8750 QRD platform   Melody Olvera
    • [PATCH v5 09/10] arm64: dts: qcom: sm8750: Add USB support for SM8750 QRD platform   Krzysztof Kozlowski
  • [PATCH v5 10/10] arm64: defconfig: Add M31 eUSB2 PHY config   Melody Olvera
    • [PATCH v5 10/10] arm64: defconfig: Add M31 eUSB2 PHY config   Krzysztof Kozlowski
      • [PATCH v5 10/10] arm64: defconfig: Add M31 eUSB2 PHY config   Melody Olvera
      • [PATCH v5 10/10] arm64: defconfig: Add M31 eUSB2 PHY config   Krzysztof Kozlowski
  • [PATCH v5 00/10] phy: qcom: Introduce USB support for SM8750   Dmitry Baryshkov
• [PATCH v5 01/10] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Add SM8750 to QMP PHY   Melody Olvera
• [PATCH v5 02/10] dt-bindings: phy: Add the M31 based eUSB2 PHY bindings   Melody Olvera
• [PATCH v5 03/10] dt-bindings: usb: qcom,dwc3: Correct the SM8750 compatible   Melody Olvera
  • [PATCH v5 03/10] dt-bindings: usb: qcom,dwc3: Correct the SM8750 compatible   Krzysztof Kozlowski
• [PATCH v5 04/10] phy: qcom: qmp-combo: Add new PHY sequences for SM8750   Melody Olvera
  • [PATCH v5 04/10] phy: qcom: qmp-combo: Add new PHY sequences for SM8750   Dmitry Baryshkov
• [PATCH v5 05/10] phy: qcom: Update description for QCOM based eUSB2 repeater   Melody Olvera
• [PATCH v5 06/10] phy: qcom: Add M31 based eUSB2 PHY driver   Melody Olvera
  • [PATCH v5 06/10] phy: qcom: Add M31 based eUSB2 PHY driver   Abel Vesa
• [PATCH v5 07/10] arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs   Melody Olvera
  • [PATCH v5 07/10] arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs   Dmitry Baryshkov
  • [PATCH v5 07/10] arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs   Krzysztof Kozlowski
  • [PATCH v5 07/10] arm64: dts: qcom: sm8750: Add USB support to SM8750 SoCs   Krzysztof Kozlowski
• [PATCH v5 08/10] arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform   Melody Olvera
  • [PATCH v5 08/10] arm64: dts: qcom: sm8750: Add USB support for SM8750 MTP platform   Krzysztof Kozlowski
• [PATCH v1] phy: starfive: jh7110-usb: Fix USB 2.0 host occasional detection failure   Hal Feng
• [PATCH v4 0/8] Add Bananapi R4 variants and add xsphy   Frank Wunderlich
  • [PATCH v4 2/8] arm64: dts: mediatek: mt7988a-bpi-r4: allow hw variants of bpi-r4   Frank Wunderlich
    • [PATCH v4 2/8] arm64: dts: mediatek: mt7988a-bpi-r4: allow hw variants of bpi-r4   AngeloGioacchino Del Regno
  • [PATCH v4 3/8] dt-bindings: phy: mtk-xs-phy: Add mt7988 compatible   Frank Wunderlich
    • [PATCH v4 3/8] dt-bindings: phy: mtk-xs-phy: Add mt7988 compatible   AngeloGioacchino Del Regno
    • [PATCH v4 3/8] dt-bindings: phy: mtk-xs-phy: Add mt7988 compatible   Krzysztof Kozlowski
  • [PATCH v4 4/8] dt-bindings: phy: mtk-xs-phy: support type switch by pericfg   Frank Wunderlich
    • [PATCH v4 4/8] dt-bindings: phy: mtk-xs-phy: support type switch by pericfg   AngeloGioacchino Del Regno
    • [PATCH v4 4/8] dt-bindings: phy: mtk-xs-phy: support type switch by pericfg   Krzysztof Kozlowski
    • [PATCH v4 4/8] dt-bindings: phy: mtk-xs-phy: support type switch by pericfg   Krzysztof Kozlowski
      • Re: [PATCH v4 4/8] dt-bindings: phy: mtk-xs-phy: support type switch by pericfg   Frank Wunderlich
  • [PATCH v4 5/8] dt-bindings: mfd: syscon: Add mt7988-topmisc   Frank Wunderlich
    • [PATCH v4 5/8] dt-bindings: mfd: syscon: Add mt7988-topmisc   AngeloGioacchino Del Regno
    • [PATCH v4 5/8] dt-bindings: mfd: syscon: Add mt7988-topmisc   Krzysztof Kozlowski
  • [PATCH v4 6/8] phy: mediatek: xsphy: support type switch by pericfg   Frank Wunderlich
    • [PATCH v4 6/8] phy: mediatek: xsphy: support type switch by pericfg   AngeloGioacchino Del Regno
  • [PATCH v4 7/8] arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2   Frank Wunderlich
    • [PATCH v4 7/8] arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2   AngeloGioacchino Del Regno
  • [PATCH v4 8/8] arm64: dts: mediatek: mt7988a-bpi-r4: enable xsphy   Frank Wunderlich
    • [PATCH v4 8/8] arm64: dts: mediatek: mt7988a-bpi-r4: enable xsphy   AngeloGioacchino Del Regno
• [PATCH v4 1/8] dt-bindings: arm: mediatek: add bpi-r4 2g5 phy variant   Frank Wunderlich
  • [PATCH v4 1/8] dt-bindings: arm: mediatek: add bpi-r4 2g5 phy variant   AngeloGioacchino Del Regno
  • [PATCH v4 1/8] dt-bindings: arm: mediatek: add bpi-r4 2g5 phy variant   Rob Herring
    • Re: [PATCH v4 1/8] dt-bindings: arm: mediatek: add bpi-r4 2g5 phy variant   Frank Wunderlich
  • [PATCH v4 1/8] dt-bindings: arm: mediatek: add bpi-r4 2g5 phy variant   Krzysztof Kozlowski
• [PATCH 00/33] Add support for Qualcomm Snapdragon SM7150 SoC and Google Pixel 4a   Danila Tikhonov
  • [PATCH 01/33] dt-bindings: arm: cpus: Add Kryo 470 CPUs   Danila Tikhonov
  • [PATCH 02/33] dt-bindings: cpufreq: qcom-hw: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 03/33] dt-bindings: watchdog: qcom-wdt: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 04/33] dt-bindings: mailbox: qcom: Add the SM7150 APCS compatible   Danila Tikhonov
  • [PATCH 05/33] dt-bindings: sram: qcom,imem: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 06/33] dt-bindings: soc: qcom: aoss-qmp: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 07/33] dt-bindings: thermal: tsens: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 08/33] dt-bindings: interrupt-controller: qcom-pdc: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 09/33] dt-bindings: usb: dwc3: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 10/33] dt-bindings: phy: qcom,qusb2: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 11/33] dt-bindings: mmc: sdhci-msm: Add the SM7150 compatible   Danila Tikhonov
    • [PATCH 11/33] dt-bindings: mmc: sdhci-msm: Add the SM7150 compatible   Ulf Hansson
  • [PATCH 12/33] dt-bindings: soc: qcom,dcc: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 13/33] dt-bindings: mfd: qcom,tcsr: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 14/33] dt-bindings: net: qcom,ipa: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 15/33] dt-bindings: ufs: qcom: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 16/33] dt-bindings: dmaengine: qcom: gpi: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 00/33] Add support for Qualcomm Snapdragon SM7150 SoC and Google Pixel 4a   Jens Reidel
    • [PATCH 00/33] Add support for Qualcomm Snapdragon SM7150 SoC and Google Pixel 4a   Neil Armstrong
  • [PATCH 00/33] Add support for Qualcomm Snapdragon SM7150 SoC and Google Pixel 4a   Krzysztof Kozlowski
  • [PATCH 00/33] Add support for Qualcomm Snapdragon SM7150 SoC and Google Pixel 4a   Pavel Machek
• [PATCH 17/33] dt-bindings: nvmem: qfprom: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 18/33] dt-bindings: crypto: qcom,inline-crypto-engine: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 19/33] dt-bindings: interconnect: qcom-bwmon: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 20/33] dt-bindings: i2c: qcom-cci: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 21/33] dt-bindings: clock: qcom-rpmhcc: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 22/33] dt-bindings: interconnect: OSM L3: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 23/33] dt-bindings: arm-smmu: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 24/33] dt-bindings: clock: qcom,gpucc: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 25/33] dt-bindings: remoteproc: qcom: sc7180-pas: Add the SM7150 compatible   Danila Tikhonov
  • [PATCH 26/33] remoteproc: qcom: pas: Add SM7150 remoteproc support   Danila Tikhonov
  • [PATCH 27/33] soc: qcom: pd-mapper: Add support for SM7150   Danila Tikhonov
    • [PATCH 27/33] soc: qcom: pd-mapper: Add support for SM7150   Dmitry Baryshkov
  • [PATCH 28/33] cpufreq: Add SM7150 to cpufreq-dt-platdev blocklist   Danila Tikhonov
    • [PATCH 28/33] cpufreq: Add SM7150 to cpufreq-dt-platdev blocklist   Dmitry Baryshkov
  • [PATCH 29/33] firmware: qcom: tzmem: disable sm7150 platform   Danila Tikhonov
    • [PATCH 29/33] firmware: qcom: tzmem: disable sm7150 platform   Dmitry Baryshkov
  • [PATCH 31/33] dt-bindings: arm: qcom: Add SM7150 Google Pixel 4a   Danila Tikhonov
  • [PATCH 32/33] dt-bindings: display: panel: samsung,ams581vf01: Add google,sunfish   Danila Tikhonov
    • [PATCH 32/33] dt-bindings: display: panel: samsung,ams581vf01: Add google,sunfish   Neil Armstrong
  • [PATCH 30/33] arm64: dts: qcom: Add dtsi for Snapdragon 730/730g/732g (SM7150) SoCs   Danila Tikhonov
  • [PATCH 30/33] arm64: dts: qcom: Add dtsi for Snapdragon 730/730g/732g (SM7150) SoCs   Konrad Dybcio
• [PATCH 1/2] dt-bindings: phy: imx8mq-usb: improve some tuning properties   Xu Yang
  • [PATCH 2/2] phy: fsl-imx8mq-usb: improve some tuning parameters and support i.MX95 tuning   Xu Yang
  • [PATCH 1/2] dt-bindings: phy: imx8mq-usb: improve some tuning properties   Krzysztof Kozlowski
    • [PATCH 1/2] dt-bindings: phy: imx8mq-usb: improve some tuning properties   Xu Yang
      • [PATCH 1/2] dt-bindings: phy: imx8mq-usb: improve some tuning properties   Krzysztof Kozlowski
      • [PATCH 1/2] dt-bindings: phy: imx8mq-usb: improve some tuning properties   Xu Yang
• [PATCH 0/2] Update PCIe PHY settings for SA8775P   Mrinmay Sarkar
  • [PATCH 1/2] phy: qcom: qmp-pcie: Update PHY settings for SA8775P   Mrinmay Sarkar
    • [PATCH 1/2] phy: qcom: qmp-pcie: Update PHY settings for SA8775P   Konrad Dybcio
    • [PATCH 1/2] phy: qcom: qmp-pcie: Update PHY settings for SA8775P   Dmitry Baryshkov
  • [PATCH 2/2] arm64: dts: qcom: sa8775p: Set max link speed to Gen4 for PCIe EP   Mrinmay Sarkar
    • [PATCH 2/2] arm64: dts: qcom: sa8775p: Set max link speed to Gen4 for PCIe EP   Konrad Dybcio
• [PATCH next] phy: tegra: xusb: remove a stray unlock   Dan Carpenter
  • [PATCH next] phy: tegra: xusb: remove a stray unlock   Jon Hunter
• [PATCH] phy: phy-rockchip-samsung-hdptx: Fix PHY PLL output 50.25MHz error   Algea Cao
  • [PATCH] phy: phy-rockchip-samsung-hdptx: Fix PHY PLL output 50.25MHz error   Cristian Ciocaltea
• [PATCH v8 0/2] Enable IPQ5018 PCI support   George Moussalem via B4 Relay
  • [PATCH v8 1/2] arm64: dts: qcom: ipq5018: Add PCIe related nodes   George Moussalem via B4 Relay
    • [PATCH v8 1/2] arm64: dts: qcom: ipq5018: Add PCIe related nodes   Konrad Dybcio
  • [PATCH v8 2/2] arm64: dts: qcom: ipq5018: Enable PCIe   George Moussalem via B4 Relay
• [PATCH v9 0/2] Enable IPQ5018 PCI support   George Moussalem via B4 Relay
  • [PATCH v9 1/2] arm64: dts: qcom: ipq5018: Add PCIe related nodes   George Moussalem via B4 Relay
  • [PATCH v9 2/2] arm64: dts: qcom: ipq5018: Enable PCIe   George Moussalem via B4 Relay
• [PATCH v2] phy: phy-rockchip-samsung-hdptx: Fix PHY PLL output 50.25MHz error   Algea Cao
• [PATCH v2] phy-zynqmp: Postpone getting clock rate until actually needed   Mike Looijmans
  • [PATCH v2] phy-zynqmp: Postpone getting clock rate until actually needed   Michal Simek
• [PATCH v2 1/3] dt-bindings: phy: imx8mq-usb: improve some tuning properties   Xu Yang
  • [PATCH v2 2/3] phy: fsl-imx8mq-usb: improve some tuning parameters   Xu Yang
  • [PATCH v2 3/3] phy: fsl-imx8mq-usb: add i.MX95 tuning support   Xu Yang
  • [PATCH v2 1/3] dt-bindings: phy: imx8mq-usb: improve some tuning properties   Frank Li
    • [PATCH v2 1/3] dt-bindings: phy: imx8mq-usb: improve some tuning properties   Xu Yang
      • [PATCH v2 1/3] dt-bindings: phy: imx8mq-usb: improve some tuning properties   Frank Li
  • [PATCH v2 1/3] dt-bindings: phy: imx8mq-usb: improve some tuning properties   Xu Yang
  • [PATCH v2 1/3] dt-bindings: phy: imx8mq-usb: improve some tuning properties   Krzysztof Kozlowski
  • [PATCH v2 1/3] dt-bindings: phy: imx8mq-usb: improve some tuning properties   Conor Dooley
    • [PATCH v2 1/3] dt-bindings: phy: imx8mq-usb: improve some tuning properties   Xu Yang
• [PATCH] phy: qcom: qmp-pcie: drop bogus x1e80100 qref supply   Johan Hovold
  • [PATCH] phy: qcom: qmp-pcie: drop bogus x1e80100 qref supply   Abel Vesa
  • [PATCH] phy: qcom: qmp-pcie: drop bogus x1e80100 qref supply   Qiang Yu
    • [PATCH] phy: qcom: qmp-pcie: drop bogus x1e80100 qref supply   Johan Hovold
• [PATCH 0/2] phy: exynos5-usbdrd: FIELD_PREP fixes   André Draszik
  • [PATCH 1/2] phy: exynos5-usbdrd: fix setting LINKSYSTEM_FLADJ on exynos7870   André Draszik
  • [PATCH 2/2] phy: exynos5-usbdrd: s/FIELD_PREP_CONST/FIELD_PREP where appropriate   André Draszik
• [PATCH 1/1] phy: freescale: imx8m-pcie: Simplify with dev_err_probe()   Alexander Stein
• [PATCH v3 1/4] dt-bindings: phy: imx8mq-usb: fix fsl,phy-tx-vboost-level-microvolt property   Xu Yang
  • [PATCH v3 2/4] dt-bindings: phy: imx8mq-usb: add imx95 tuning support   Xu Yang
  • [PATCH v3 3/4] phy: fsl-imx8mq-usb: fix phy_tx_vboost_level_from_property()   Xu Yang
  • [PATCH v3 4/4] phy: fsl-imx8mq-usb: add i.MX95 tuning support   Xu Yang

Last message date: Wed Apr 30 09:43:34 PDT 2025
Archived on: Mon May 12 04:18:32 PDT 2025

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...