[PATCH] phy: qcom: qmp-pcie: drop bogus x1e80100 qref supply

[Qiang Yu]

On 4/29/2025 3:54 PM, Johan Hovold wrote:
> The PCIe PHYs on x1e80100 do not a have a qref supply so stop requesting
> one. This also avoids the follow warning at boot:
>
> 	qcom-qmp-pcie-phy 1be0000.phy: supply vdda-qref not found, using dummy regulator
>
> Fixes: e961ec81a39b ("phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3")
> Cc: Qiang Yu <quic_qianyu at quicinc.com>
> Signed-off-by: Johan Hovold <johan+linaro at kernel.org>
> ---
We have QREF for each PCIe port on the X1E80100, all of which consume 
the regulator L3J. Although the PCIe PHY uses QREF indirectly, this 
creates a dependency, right? If PCIe doesn't vote for it, how can the 
PMIC driver decide when to disable L3J during system suspend or runtime 
suspend? Is there a chance that L3J could be disabled while PCIe still 
requires it?
>   drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> index c232b8fe9846..e5277ce9c136 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
> @@ -4233,8 +4233,8 @@ static const struct qmp_phy_cfg x1e80100_qmp_gen4x8_pciephy_cfg = {
>   
>   	.reset_list		= sdm845_pciephy_reset_l,
>   	.num_resets		= ARRAY_SIZE(sdm845_pciephy_reset_l),
> -	.vreg_list		= sm8550_qmp_phy_vreg_l,
> -	.num_vregs		= ARRAY_SIZE(sm8550_qmp_phy_vreg_l),
> +	.vreg_list		= qmp_phy_vreg_l,
> +	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
>   	.regs			= pciephy_v6_regs_layout,
>   
>   	.pwrdn_ctrl		= SW_PWRDN | REFCLK_DRV_DSBL,

-- 
With best wishes
Qiang Yu