August 2026 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sat Aug 1 10:51:24 PDT 2026
Ending: Mon Aug 31 19:53:15 PDT 2026
Messages: 287

• [PATCH v2] spi: meson-spifc: use devm_pm_runtime_set_active_enabled   Felix Gu
• [PATCH v2] spi: meson-spifc: use devm_pm_runtime_set_active_enabled   sashiko-bot at kernel.org
• [PATCH 1/2] ARM: dts: Correct white-space style   Krzysztof Kozlowski
• [PATCH 2/2] arm64: dts: Correct white-space style   Krzysztof Kozlowski
• [PATCH 2/2] arm64: dts: Correct white-space style   Sven Peter
• [PATCH 1/2] ARM: dts: Correct white-space style   Michal Simek
• [PATCH 2/2] arm64: dts: Correct white-space style   Michal Simek
• [PATCH v3 1/4] spi: dt-bindings: amlogic: spisg: Document A9-specific properties   Xianwei Zhao
• [PATCH v2 10/15] drm/renesas/shmobile: remove dependency on DRM simple helpers   Geert Uytterhoeven
• (subset) [PATCH 1/2] ARM: dts: Correct white-space style   Krzysztof Kozlowski
• (subset) [PATCH 2/2] arm64: dts: Correct white-space style   Krzysztof Kozlowski
• [PATCH v8 0/8] Add VIM4 MCU/FAN support   linux-kernel-dev at aliel.fr
• [PATCH v8 4/8] mfd: khadas-mcu: Add support for VIM4 MCU variant   linux-kernel-dev at aliel.fr
• [PATCH v5 0/3] nvmem: migrate to const void * in reg_write   Link Mauve
• [PATCH v5 1/3] firmware: meson: pass a const buffer to meson_sm_call_write()   Link Mauve
• [PATCH v5 2/3] nvmem: core: deprecate reg_write callback with reg_write_const   Link Mauve
• [PATCH v5 3/3] nvmem: make all reg_write callbacks take const void *   Link Mauve
• [PATCH 0/3] Power: Add power domain for A9   Ulf Hansson
• [PATCH v2] drm/meson: clean up KMS polling on register failure   Myeonghun Pak
• [PATCH v5 3/3] nvmem: make all reg_write callbacks take const void *   sashiko-bot at kernel.org
• [PATCH v2] drm/meson: clean up KMS polling on register failure   sashiko-bot at kernel.org
• [PATCH v9 0/6] Add VIM4 MCU/FAN support   Ronald Claveau via B4 Relay
• [PATCH v9 1/6] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support   Ronald Claveau via B4 Relay
• [PATCH v9 2/6] mfd: khadas-mcu: Use MFD_CELL_* macros for cell declarations   Ronald Claveau via B4 Relay
• [PATCH v9 3/6] mfd: khadas-mcu: Add support for VIM4 MCU variant   Ronald Claveau via B4 Relay
• [PATCH v9 4/6] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support   Ronald Claveau via B4 Relay
• [PATCH v9 5/6] arm64: dts: amlogic: t7: Add i2c controller node   Ronald Claveau via B4 Relay
• [PATCH v9 6/6] arm64: dts: amlogic: t7: khadas-vim4: Add i2c MCU fan node   Ronald Claveau via B4 Relay
• [PATCH v9 1/6] mfd: khadas-mcu: Add per-variant configuration infrastructure and VIM4 support   sashiko-bot at kernel.org
• [PATCH v9 2/6] mfd: khadas-mcu: Use MFD_CELL_* macros for cell declarations   sashiko-bot at kernel.org
• [PATCH v9 5/6] arm64: dts: amlogic: t7: Add i2c controller node   sashiko-bot at kernel.org
• [PATCH v9 3/6] mfd: khadas-mcu: Add support for VIM4 MCU variant   sashiko-bot at kernel.org
• [PATCH v9 4/6] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support   sashiko-bot at kernel.org
• [PATCH v9 6/6] arm64: dts: amlogic: t7: khadas-vim4: Add i2c MCU fan node   sashiko-bot at kernel.org
• [PATCH v9 4/6] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support   Daniel Lezcano
• [PATCH 2/2] thermal: amlogic: Add support for A9 thermal controller   Daniel Lezcano
• GXL/S905X HDMI: 1440x900 DMT mode fails to display despite clean modeset (meson_drm)   Steve_vr
• GXL/S905X HDMI: 1440x900 DMT mode fails to display despite clean modeset (meson_drm)   Christian Hewitt
• [PATCH] pwm: meson: Convert to waveform API   Alexandre Mergnat
• [PATCH v4 0/3] nvmem: migrate to const void * in reg_write   Andy Shevchenko
• [PATCH v4 0/3] nvmem: migrate to const void * in reg_write   Link Mauve
• [PATCH v4 0/3] nvmem: migrate to const void * in reg_write   Link Mauve
• [PATCH 2/2] thermal: amlogic: Add support for A9 thermal controller   Xianwei Zhao
• [PATCH v2 0/2] thermal: Add support A9   Xianwei Zhao via B4 Relay
• [PATCH v2 1/2] dt-bindings: thermal: amlogic: Add A9 thermal bindings   Xianwei Zhao via B4 Relay
• [PATCH v2 2/2] thermal: amlogic: Add support for A9 thermal controller   Xianwei Zhao via B4 Relay
• [PATCH v2] spi: meson-spifc: use devm_pm_runtime_set_active_enabled   Mark Brown
• [PATCH v7 0/6] Add Amlogic stateless H.264 video decoder for S4   Zhentao Guo via B4 Relay
• [PATCH v7 1/6] firmware: meson: sm: video firmware loading via secure monitor   Zhentao Guo via B4 Relay
• [PATCH v7 2/6] firmware: meson: sm: Add video firmware loading SMC call   Zhentao Guo via B4 Relay
• [PATCH v7 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Zhentao Guo via B4 Relay
• [PATCH v7 4/6] decoder: Add V4L2 stateless H.264 decoder driver   Zhentao Guo via B4 Relay
• [PATCH v7 5/6] arm64: dts: amlogic: Add video decoder driver support for S4 SOCs   Zhentao Guo via B4 Relay
• [PATCH v7 6/6] arm64: defconfig: Enable CONFIG_VIDEO_AMLOGIC_VDEC   Zhentao Guo via B4 Relay
• [PATCH v7 1/6] firmware: meson: sm: video firmware loading via secure monitor   sashiko-bot at kernel.org
• [PATCH v7 2/6] firmware: meson: sm: Add video firmware loading SMC call   sashiko-bot at kernel.org
• [PATCH v7 4/6] decoder: Add V4L2 stateless H.264 decoder driver   sashiko-bot at kernel.org
• [GIT PULL] clk: meson: Amlogic clock changes for v7.3   Stephen Boyd
• [PATCH] pinctrl: meson: a4: Add input enable pin configuration   Xianwei Zhao via B4 Relay
• [PATCH] pinctrl: meson: sync some modify from A4   Xianwei Zhao via B4 Relay
• [PATCH] pinctrl: meson: a4: Add input enable pin configuration   sashiko-bot at kernel.org
• [PATCH] pinctrl: meson: sync some modify from A4   sashiko-bot at kernel.org
• [PATCH 0/3] mmc: Handle errors from optional IRQ lookup   phucduc.bui at gmail.com
• [PATCH 1/3] mmc: meson-gx: Handle errors from optional IRQ lookup   phucduc.bui at gmail.com
• [PATCH 2/3] mmc: davinci: Handle errors from optional IRQ lookup   phucduc.bui at gmail.com
• [PATCH 3/3] mmc: davinci: Handle optional IRQ return value correctly   phucduc.bui at gmail.com
• [PATCH 1/3] mmc: meson-gx: Handle errors from optional IRQ lookup   sashiko-bot at kernel.org
• [PATCH 2/3] mmc: davinci: Handle errors from optional IRQ lookup   sashiko-bot at kernel.org
• [PATCH 3/3] mmc: davinci: Handle optional IRQ return value correctly   sashiko-bot at kernel.org
• [PATCH v9 3/6] mfd: khadas-mcu: Add support for VIM4 MCU variant   Lee Jones
• [PATCH 1/2] dt-bindings: usb: snps,dwc3: Correctly restrict number of resets   Krzysztof Kozlowski
• [PATCH 2/2] dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: Correctly restrict number of resets   Krzysztof Kozlowski
• [PATCH] ASoC: meson: aiu: make aiu_formatter_i2s_drv static   Jerome Brunet
• [PATCH] ASoC: meson: aiu: make aiu_formatter_i2s_drv static   Valerio Setti
• [PATCH 1/3] mmc: meson-gx: Handle errors from optional IRQ lookup   Bui Duc Phuc
• [PATCH 2/3] mmc: davinci: Handle errors from optional IRQ lookup   Bui Duc Phuc
• [PATCH 3/3] mmc: davinci: Handle optional IRQ return value correctly   Bui Duc Phuc
• [PATCH v2 0/3] mmc: Handle errors from optional IRQ lookup   phucduc.bui at gmail.com
• [PATCH v2 1/3] mmc: meson-gx: Handle errors from optional IRQ lookup   phucduc.bui at gmail.com
• [PATCH v2 2/3] mmc: davinci: Handle errors from optional IRQ lookup   phucduc.bui at gmail.com
• [PATCH v2 3/3] mmc: davinci: Handle optional IRQ return value correctly   phucduc.bui at gmail.com
• [PATCH v2 3/3] mmc: davinci: Handle optional IRQ return value correctly   sashiko-bot at kernel.org
• [PATCH v3 02/16] PCI: dwc: Use cached PCIe capability offset in core   Manivannan Sadhasivam
• [PATCH v7 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Krzysztof Kozlowski
• [PATCH v2 1/2] dt-bindings: thermal: amlogic: Add A9 thermal bindings   Krzysztof Kozlowski
• [PATCH v7 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Zhentao Guo
• [PATCH v7 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Krzysztof Kozlowski
• [PATCH v7 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Zhentao Guo
• [PATCH] ASoC: meson: aiu: make aiu_formatter_i2s_drv static   Mark Brown
• [PATCH v3 04/16] PCI: dwc: layerscape-ep: Use cached PCIe capability offset   Frank Li
• [PATCH v2 54/78] drm/meson: encoder_cvbs: Switch to atomic_create_state   sashiko-bot at kernel.org
• [PATCH v2 56/78] drm/meson: encoder_hdmi: Switch to atomic_create_state   sashiko-bot at kernel.org
• [PATCH] pinctrl: meson: a4: Add input enable pin configuration   Linus Walleij
• [PATCH] pinctrl: meson: sync some modify from A4   Linus Walleij
• [PATCH 1/2] ASoC: meson: aiu: Drop redundant probe error messages   phucduc.bui at gmail.com
• [PATCH 2/2] ASoC: meson: meson-card-utils: Drop redundant probe error messages   phucduc.bui at gmail.com
• [PATCH 2/2] ASoC: meson: meson-card-utils: Drop redundant probe error messages   sashiko-bot at kernel.org
• [PATCH 1/2] ASoC: meson: aiu: Drop redundant probe error messages   Jerome Brunet
• [PATCH 2/2] ASoC: meson: meson-card-utils: Drop redundant probe error messages   Jerome Brunet
• [PATCH 2/2] ASoC: meson: meson-card-utils: Drop redundant probe error messages   Jerome Brunet
• [PATCH v2 00/61] drm/plane: Convert all drivers to atomic_create_state and remove reset   Maxime Ripard
• [PATCH v2 23/61] drm/meson: Convert to atomic_create_state   Maxime Ripard
• [PATCH 0/5] drm/vblank: Enforce all-or-nothing vblank support   Lyude Paul
• [PATCH 1/5] drm/vblank: Add drm_device.has_hw_vblank   Lyude Paul
• [PATCH 2/5] drm/vblank: Remove drm->num_crtcs   Lyude Paul
• [PATCH 3/5] drm/vblank: Remove num_crtcs argument from drm_vblank_init()   Lyude Paul
• [PATCH 4/5] drm/vblank: Use drm_for_each_crtc() in drm_vblank_init()   Lyude Paul
• [PATCH 5/5] drm/vblank: Require all CRTCs implement vblank support in drm_vblank_init()   Lyude Paul
• [PATCH 3/5] drm/vblank: Remove num_crtcs argument from drm_vblank_init()   sashiko-bot at kernel.org
• [PATCH 4/5] drm/vblank: Use drm_for_each_crtc() in drm_vblank_init()   sashiko-bot at kernel.org
• [PATCH 5/5] drm/vblank: Require all CRTCs implement vblank support in drm_vblank_init()   sashiko-bot at kernel.org
• [PATCH 2/2] ASoC: meson: meson-card-utils: Drop redundant probe error messages   Bui Duc Phuc
• [PATCH 5/5] drm/msm/dp: mark the SST connector disconnected when MST is enabled   Yongxing Mou
• [PATCH 3/5] drm/msm/dp: suppress bridge hotplug events during MST operation   Yongxing Mou
• [PATCH 1/5] drm/bridge: allow hpd_notify() to suppress connector hotplug events   Yongxing Mou
• [PATCH 4/5] drm/msm/dp: report IRQ_HPD as an IRQ-only notification   Yongxing Mou
• [PATCH 2/5] drm/bridge_connector: preserve connector status for IRQ-only HPD events   Yongxing Mou
• [PATCH 0/5] drm/vblank: Enforce all-or-nothing vblank support   Jani Nikula
• [PATCH] pinctrl: meson: Fix typo in s4 group name   Sean Anderson
• [PATCH v5 0/3] nvmem: migrate to const void * in reg_write   Andy Shevchenko
• [PATCH 1/5] drm/bridge: allow hpd_notify() to suppress connector hotplug events   Chaoyi Chen
• [PATCH 1/5] drm/bridge: allow hpd_notify() to suppress connector hotplug events   Dmitry Baryshkov
• [PATCH 1/5] drm/bridge: allow hpd_notify() to suppress connector hotplug events   Dmitry Baryshkov
• [PATCH 2/5] drm/bridge_connector: preserve connector status for IRQ-only HPD events   Dmitry Baryshkov
• [PATCH 3/5] drm/msm/dp: suppress bridge hotplug events during MST operation   Dmitry Baryshkov
• [PATCH 5/5] drm/msm/dp: mark the SST connector disconnected when MST is enabled   Dmitry Baryshkov
• [PATCH v7 0/2] PCI: Configure Root Port MPS during host probing   Niklas Cassel
• [PATCH v3 2/2] pwm: meson: Add support for Amlogic S7   Alexandre Mergnat
• [PATCH v3 1/2] dt-bindings: pwm: amlogic: Add new bindings for S6 S7 S7D   Alexandre Mergnat
• [PATCH 0/2] arm64: dts: amlogic: t7: fix UART clock and SD card recovery   Lucas Tanure
• [PATCH 1/2] arm64: dts: amlogic: t7: use the real UART pclk   Lucas Tanure
• [PATCH 2/2] arm64: dts: amlogic: t7: khadas-vim4: allow the SD card to be power cycled   Lucas Tanure
• [PATCH v3 2/2] pwm: meson: Add support for Amlogic S7   Uwe Kleine-König
• [PATCH 1/2] arm64: dts: amlogic: t7: use the real UART pclk   Xianwei Zhao
• [PATCH 1/2] arm64: dts: amlogic: t7: use the real UART pclk   Ronald Claveau
• [PATCH v9 3/6] mfd: khadas-mcu: Add support for VIM4 MCU variant   Ronald Claveau
• [PATCH v9 4/6] thermal: khadas-mcu-fan: Add fan config from platform data Add regulator support   linux-kernel-dev at aliel.fr
• [PATCH] rtc: amlogic-a4: clear unsupported update interrupt feature   Alexandre Belloni
• [PATCH treewide 0/5] clk: Make sure clk_init_data is fully initialized (part 1)   Geert Uytterhoeven
• [PATCH treewide 1/5] clk: ti: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH treewide 2/5] clk: visconti: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH treewide 3/5] hwmon: (ltc4282) Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH treewide 4/5] iio: frequency: adf4377: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH treewide 5/5] spi: amlogic-spisg: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH treewide 1/5] clk: ti: Make sure clk_init_data is fully initialized   sashiko-bot at kernel.org
• [PATCH treewide 3/5] hwmon: (ltc4282) Make sure clk_init_data is fully initialized   sashiko-bot at kernel.org
• [PATCH treewide 4/5] iio: frequency: adf4377: Make sure clk_init_data is fully initialized   sashiko-bot at kernel.org
• [PATCH treewide 5/5] spi: amlogic-spisg: Make sure clk_init_data is fully initialized   sashiko-bot at kernel.org
• [PATCH treewide 2/5] clk: visconti: Make sure clk_init_data is fully initialized   sashiko-bot at kernel.org
• [PATCH treewide 3/5] hwmon: (ltc4282) Make sure clk_init_data is fully initialized   Guenter Roeck
• [PATCH treewide 1/5] clk: ti: Make sure clk_init_data is fully initialized   Brian Masney
• [PATCH treewide 2/5] clk: visconti: Make sure clk_init_data is fully initialized   Brian Masney
• [PATCH treewide 3/5] hwmon: (ltc4282) Make sure clk_init_data is fully initialized   Brian Masney
• [PATCH treewide 4/5] iio: frequency: adf4377: Make sure clk_init_data is fully initialized   Brian Masney
• [PATCH treewide 5/5] spi: amlogic-spisg: Make sure clk_init_data is fully initialized   Brian Masney
• [PATCH treewide 4/5] iio: frequency: adf4377: Make sure clk_init_data is fully initialized   Jonathan Cameron
• [PATCH treewide 2/5] clk: visconti: Make sure clk_init_data is fully initialized   nobuhiro.iwamatsu.x90 at mail.toshiba
• [PATCH treewide 1/5] clk: ti: Make sure clk_init_data is fully initialized   Mathieu Dubois-Briand
• [PATCH treewide 1/5] clk: ti: Make sure clk_init_data is fully initialized   Stephen Boyd
• [PATCH treewide 2/5] clk: visconti: Make sure clk_init_data is fully initialized   Stephen Boyd
• [PATCH v2 1/2] dt-bindings: thermal: amlogic: Add A9 thermal bindings   Xianwei Zhao
• [PATCH v2 1/2] dt-bindings: thermal: amlogic: Add A9 thermal bindings   Krzysztof Kozlowski
• [PATCH v2 1/2] dt-bindings: thermal: amlogic: Add A9 thermal bindings   Xianwei Zhao
• [PATCH treewide 4/5] iio: frequency: adf4377: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH treewide 5/5] spi: amlogic-spisg: Make sure clk_init_data is fully initialized   Xianwei Zhao
• (subset) [PATCH treewide 0/5] clk: Make sure clk_init_data is fully initialized (part 1)   Mark Brown
• [PATCH v3 02/16] PCI: dwc: Use cached PCIe capability offset in core   Hans Zhang
• [PATCH] media: rc: Convert to DEFINE_SIMPLE_DEV_PM_OPS()   Triet Hoang
• [PATCH 2/5] drm/bridge_connector: preserve connector status for IRQ-only HPD events   Yongxing Mou
• [PATCH 1/5] drm/bridge: allow hpd_notify() to suppress connector hotplug events   Yongxing Mou
• [PATCH] media: rc: Convert to DEFINE_SIMPLE_DEV_PM_OPS()   sashiko-bot at kernel.org
• [PATCH v3 0/2] thermal: Add support A9   Xianwei Zhao via B4 Relay
• [PATCH v3 1/2] dt-bindings: thermal: amlogic: Add A9 thermal bindings   Xianwei Zhao via B4 Relay
• [PATCH v3 2/2] thermal: amlogic: Add support for A9 thermal controller   Xianwei Zhao via B4 Relay
• [PATCH v3 1/2] dt-bindings: thermal: amlogic: Add A9 thermal bindings   sashiko-bot at kernel.org
• [PATCH v3 2/2] thermal: amlogic: Add support for A9 thermal controller   sashiko-bot at kernel.org
• [PATCH 0/3] media: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH 1/3] media: cec: meson: ao-cec-g12a: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH 2/3] media: microchip: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH 3/3] media: samsung: exynos4-is: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH 0/2] mmc: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH 1/2] mmc: meson-gx: FIXME: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH 2/2] mmc: sdhci-of-arasan: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH net-next 0/3] net: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH net-next 1/3] net: macb: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH net-next 2/3] net: mdio: mux-meson-g12a: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH net-next 3/3] net: phy: air_en8811h: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH 3/3] media: samsung: exynos4-is: Make sure clk_init_data is fully initialized   sashiko-bot at kernel.org
• [PATCH 2/2] mmc: sdhci-of-arasan: Make sure clk_init_data is fully initialized   sashiko-bot at kernel.org
• [PATCH treewide 0/5] clk: Make sure clk_init_data is fully initialized (part 1)   Geert Uytterhoeven
• [PATCH 1/2] mmc: meson-gx: FIXME: Make sure clk_init_data is fully initialized   sashiko-bot at kernel.org
• [PATCH 0/2] mmc: Make sure clk_init_data is fully initialized   Michal Simek
• [PATCH 0/2] mmc: Make sure clk_init_data is fully initialized   Geert Uytterhoeven
• [PATCH 00/70] drm/crtc: Convert all drivers to atomic_create_state and remove reset   Maxime Ripard
• [PATCH 16/70] drm/meson: Switch to drm_atomic_helper_crtc_create_state   Maxime Ripard
• [PATCH 1/2] crypto: amlogic: Fix IRQ handler return value and fallthrough logic   Mohamad Raizudeen
• [PATCH 2/2] crypto: amlogic: Use devm APIs for clock and engine management   Mohamad Raizudeen
• [PATCH v3 1/2] dt-bindings: thermal: amlogic: Add A9 thermal bindings   Conor Dooley
• [PATCH] crypto: amlogic: Fix DMA memory leak in cipher error path   Mohamad Raizudeen
• [PATCH] crypto: amlogic: Fix DMA memory leak in cipher error path   sashiko-bot at kernel.org
• [PATCH v2] crypto: amlogic: Fix DMA memory leak in cipher error path   Mohamad Raizudeen
• [PATCH v2] crypto: amlogic: Fix DMA memory leak in cipher error path   sashiko-bot at kernel.org
• [PATCH net-next 1/3] net: macb: Make sure clk_init_data is fully initialized   sashiko-bot at kernel.org
• [PATCH net-next 2/3] net: mdio: mux-meson-g12a: Make sure clk_init_data is fully initialized   sashiko-bot at kernel.org
• [PATCH net-next 3/3] net: phy: air_en8811h: Make sure clk_init_data is fully initialized   sashiko-bot at kernel.org
• [PATCH net-next 0/3] net: Make sure clk_init_data is fully initialized   Jakub Kicinski
• [PATCH 1/2] arm64: dts: amlogic: t7: use the real UART pclk   Lucas Tanure
• [PATCH 1/2] arm64: dts: amlogic: t7: use the real UART pclk   Lucas Tanure
• [PATCH v2 0/2] arm64: dts: amlogic: t7: fix UART clock and SD card recovery   Lucas Tanure
• [PATCH v2 1/2] arm64: dts: amlogic: t7: use the real UART pclk   Lucas Tanure
• [PATCH v2 2/2] arm64: dts: amlogic: t7: khadas-vim4: allow the SD card to be power cycled   Lucas Tanure
• [RFC] clk: meson: t7: Intermittent boot instability and memory corruption on VIM4   Lucas Tanure
• [PATCH 1/5] drm/bridge: allow hpd_notify() to suppress connector hotplug events   Yongxing Mou
• [PATCH 2/2] mmc: sdhci-of-arasan: Make sure clk_init_data is fully initialized   Adrian Hunter
• [PATCH 1/2] arm64: dts: amlogic: t7: use the real UART pclk   Ronald Claveau
• [PATCH 1/2] arm64: dts: amlogic: t7: use the real UART pclk   Lucas Tanure
• [PATCH 00/70] drm/crtc: Convert all drivers to atomic_create_state and remove reset   Thomas Zimmermann
• [PATCH 0/3] media: Make sure clk_init_data is fully initialized   Brian Masney
• [PATCH 1/2] mmc: meson-gx: FIXME: Make sure clk_init_data is fully initialized   Brian Masney
• [PATCH 2/2] mmc: sdhci-of-arasan: Make sure clk_init_data is fully initialized   Brian Masney
• [PATCH net-next 0/3] net: Make sure clk_init_data is fully initialized   Brian Masney
• [RFC] clk: meson: t7: Intermittent boot instability and memory corruption on VIM4   Brian Masney
• [PATCH net-next 1/3] net: macb: Make sure clk_init_data is fully initialized   Théo Lebrun
• [PATCH v4 0/2] thermal: Add support A9   Xianwei Zhao via B4 Relay
• [PATCH v4 1/2] dt-bindings: thermal: amlogic: Add A9 thermal bindings   Xianwei Zhao via B4 Relay
• [PATCH v4 2/2] thermal: amlogic: Add support for A9 thermal controller   Xianwei Zhao via B4 Relay
• [PATCH v4 2/2] thermal: amlogic: Add support for A9 thermal controller   sashiko-bot at kernel.org
• [PATCH v2 09/15] drm/mediatek: remove dependency on DRM simple helpers   CK Hu (胡俊光)
• [PATCH v2 00/15] drm/drm_simple: remove drm_simple_encoder_init   Thomas Zimmermann
• [PATCH 1/2] arm64: dts: amlogic: t7: use the real UART pclk   Ronald Claveau
• [PATCH v2 00/15] drm/drm_simple: remove drm_simple_encoder_init   Diogo Silva
• [RFC] clk: meson: t7: Intermittent boot instability and memory corruption on VIM4   Neil Armstrong
• [RFC] clk: meson: t7: Intermittent boot instability and memory corruption on VIM4   Lucas Tanure
• [RFC] clk: meson: t7: Intermittent boot instability and memory corruption on VIM4   Lucas Tanure
• [PATCH 3/5] drm/vblank: Remove num_crtcs argument from drm_vblank_init()   Thomas Zimmermann
• [PATCH v2 00/15] drm/drm_simple: remove drm_simple_encoder_init   Thomas Zimmermann
• [RFC] clk: meson: t7: Intermittent boot instability and memory corruption on VIM4   Lucas Tanure
• [RFC] clk: meson: t7: Intermittent boot instability and memory corruption on VIM4   Brian Masney
• [RFC] clk: meson: t7: Intermittent boot instability and memory corruption on VIM4   Lucas Tanure
• [RFC] clk: meson: t7: Intermittent boot instability and memory corruption on VIM4   Chuan Liu
• [PATCH 2/3] media: microchip: Make sure clk_init_data is fully initialized   Eugen Hristev
• [PATCH v3 2/2] pwm: meson: Add support for Amlogic S7   Xianwei Zhao
• [PATCH v4 0/4] Add PWM support Amlogic S7 S7D S6   Xianwei Zhao via B4 Relay
• [PATCH v4 1/4] dt-bindings: pwm: amlogic: Add new bindings for S6 S7 S7D   Xianwei Zhao via B4 Relay
• [PATCH v4 2/4] pwm: meson: add the PWM count driver data   Xianwei Zhao via B4 Relay
• [PATCH v4 3/4] pwm: meson: use bulk API for per-channel clocks   Xianwei Zhao via B4 Relay
• [PATCH v4 4/4] pwm: meson: Add support for Amlogic S7   Xianwei Zhao via B4 Relay
• [PATCH 1/2] arm64: dts: amlogic: t7: use the real UART pclk   Neil Armstrong
• [PATCH v2 1/2] arm64: dts: amlogic: t7: use the real UART pclk   Neil Armstrong
• [PATCH v2 2/2] arm64: dts: amlogic: t7: khadas-vim4: allow the SD card to be power cycled   Neil Armstrong
• [PATCH] pinctrl: meson: Fix typo in s4 group name   Neil Armstrong
• [RFC PATCH] drm/meson: dw-hdmi: Propagate reset failures during initialization   Pengpeng Hou
• [RFC PATCH] drm/meson: dw-hdmi: Propagate reset failures during initialization   sashiko-bot at kernel.org
• [PATCH 0/4] arm64: amlogic: t7: describe the VIM4 supplies and keep the fabric clocks running   Lucas Tanure
• [PATCH 1/4] clk: meson: t7: keep the memory fabric clocks running   Lucas Tanure
• [PATCH 2/4] arm64: dts: amlogic: t7: fix the pin groups of two PWM outputs   Lucas Tanure
• [PATCH 3/4] arm64: dts: amlogic: t7: khadas-vim4: add the PWM-driven supplies   Lucas Tanure
• [PATCH 4/4] arm64: dts: amlogic: t7: fix the pin groups of the vsync PWM   Lucas Tanure
• [PATCH] arm64: dts: amlogic: Replace spaces indentation with tabs   Krzysztof Kozlowski
• [PATCH] arm64: dts: amlogic: Replace spaces indentation with tabs   Neil Armstrong
• [PATCH 3/4] arm64: dts: amlogic: t7: khadas-vim4: add the PWM-driven supplies   Neil Armstrong
• [PATCH 4/4] arm64: dts: amlogic: t7: fix the pin groups of the vsync PWM   Neil Armstrong
• [PATCH 2/4] arm64: dts: amlogic: t7: fix the pin groups of two PWM outputs   Neil Armstrong
• [PATCH v8 0/6] Add Amlogic stateless H.264 video decoder for S4   Zhentao Guo via B4 Relay
• [PATCH v8 1/6] firmware: meson: sm: video firmware loading via secure monitor   Zhentao Guo via B4 Relay
• [PATCH v8 2/6] firmware: meson: sm: Add video firmware loading SMC call   Zhentao Guo via B4 Relay
• [PATCH v8 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Zhentao Guo via B4 Relay
• [PATCH v8 4/6] decoder: Add V4L2 stateless H.264 decoder driver   Zhentao Guo via B4 Relay
• [PATCH v8 5/6] arm64: dts: amlogic: Add video decoder driver support for S4 SOCs   Zhentao Guo via B4 Relay
• [PATCH v8 6/6] arm64: defconfig: Enable CONFIG_VIDEO_AMLOGIC_VDEC   Zhentao Guo via B4 Relay
• [PATCH v8 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   sashiko-bot at kernel.org
• [PATCH v8 1/6] firmware: meson: sm: video firmware loading via secure monitor   sashiko-bot at kernel.org
• [PATCH v8 2/6] firmware: meson: sm: Add video firmware loading SMC call   sashiko-bot at kernel.org
• [PATCH v8 4/6] decoder: Add V4L2 stateless H.264 decoder driver   sashiko-bot at kernel.org
• [PATCH v8 6/6] arm64: defconfig: Enable CONFIG_VIDEO_AMLOGIC_VDEC   sashiko-bot at kernel.org
• (subset) [PATCH 0/4] arm64: amlogic: t7: describe the VIM4 supplies and keep the fabric clocks running   Jerome Brunet
• [PATCH] spi: amlogic-spisg: check clk_prepare_enable() return value   Li Youhong
• [PATCH] spi: amlogic-spisg: check clk_prepare_enable() return value   sashiko-bot at kernel.org
• [PATCH v2 0/2] arm64: dts: amlogic: t7: fix UART clock and SD card recovery   Neil Armstrong
• (subset) [PATCH 0/4] arm64: amlogic: t7: describe the VIM4 supplies and keep the fabric clocks running   Neil Armstrong
• [PATCH] arm64: dts: amlogic: Replace spaces indentation with tabs   Neil Armstrong
• [PATCH AUTOSEL 6.18] pinctrl: meson: amlogic-a4: use nolock get range   Sasha Levin
• [PATCH 00/70] drm/crtc: Convert all drivers to atomic_create_state and remove reset   Maxime Ripard
• [PATCH v8 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Conor Dooley
• [PATCH v8 3/6] media: dt-bindings: Add Amlogic V4L2 video decoder   Zhentao Guo
• [PATCH v2] crypto/amlogic: Use devm APIs for clock management   Mohamad Raizudeen
• [PATCH v2] crypto/amlogic: Use devm APIs for clock management   sashiko-bot at kernel.org

Last message date: Mon Aug 31 19:53:15 PDT 2026
Archived on: Tue Sep 1 02:30:34 PDT 2026

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...