[PATCH net-next 1/3] net: macb: Make sure clk_init_data is fully initialized

[Geert Uytterhoeven]

The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need.  However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.

Make sure all members are fully initialized, to avoid such bugs, and to
prevent future breakage when converting drivers to a different method
for specifying the parents.

Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
Compile-tested only.
---
 drivers/net/ethernet/cadence/macb_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 1476bce77f34d2a5..319e43098f57ed7b 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -5376,7 +5376,7 @@ static int fu540_c000_clk_init(struct platform_device *pdev, struct clk **pclk,
 			       struct clk **hclk, struct clk **tx_clk,
 			       struct clk **rx_clk, struct clk **tsu_clk)
 {
-	struct clk_init_data init;
+	struct clk_init_data init = {};
 	int err = 0;
 
 	err = macb_clk_init_dflt(pdev, pclk, hclk, tx_clk, rx_clk, tsu_clk);
-- 
2.43.0