October 2022 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sat Oct 1 00:24:34 PDT 2022
Ending: Mon Oct 31 15:37:36 PDT 2022
Messages: 451

• [maintainer-tools] github-merge-pr: handle user using master as pushing repo   LEDE Commits
• [openwrt/openwrt] airoha: fix imagebuilder generation by introducing generic target   LEDE Commits
• [openwrt/openwrt] arm-trusted-firmware-mvebu: add Methode eDPU support   LEDE Commits
• [openwrt/openwrt] arm-trusted-firmware-sunxi: add package CPE ID   LEDE Commits
• [openwrt/openwrt] arm-trusted-firmware-sunxi: add package CPE ID   LEDE Commits
• [openwrt/openwrt] at91:   LEDE Commits
• [openwrt/openwrt] at91: kernel v5.10: refresh configs   LEDE Commits
• [openwrt/openwrt] at91: kernel v5.15: refresh configs   LEDE Commits
• [openwrt/openwrt] at91: kernel v5.15: use KERNEL_TESTING_PATCHVER:=5.15   LEDE Commits
• [openwrt/openwrt] at91: Remove CONFIG_PINCTRL_MCP23S08 configuration option   LEDE Commits
• [openwrt/openwrt] ath79: add low_mem to tiny image   LEDE Commits
• [openwrt/openwrt] ath79: add support for Linksys EA4500 v3   LEDE Commits
• [openwrt/openwrt] ath79: fix LibreRouter-v1 watchdog and poe_pass   LEDE Commits
• [openwrt/openwrt] ath79: fix LibreRouter-v1 watchdog and poe_pass   LEDE Commits
• [openwrt/openwrt] ath79: fix model name of Extreme Networks WS-AP3805i   LEDE Commits
• [openwrt/openwrt] ath79: fix model name of Extreme Networks WS-AP3805i   LEDE Commits
• [openwrt/openwrt] ath79: fix reference clock for RouterBoard 912UAG   LEDE Commits
• [openwrt/openwrt] ath79: fix reference clock for RouterBoard 912UAG   LEDE Commits
• [openwrt/openwrt] ath79: improve MAC address configuration of ELECOM devices   LEDE Commits
• [openwrt/openwrt] ath79: increase max tx ring buffer for ag71xx   LEDE Commits
• [openwrt/openwrt] ath79: move ubnt-xm to tiny   LEDE Commits
• [openwrt/openwrt] ath79: refresh kernel patches   LEDE Commits
• [openwrt/openwrt] ath79: support Ruckus ZoneFlex 7321   LEDE Commits
• [openwrt/openwrt] ath79: support Ruckus ZoneFlex 7372   LEDE Commits
• [openwrt/openwrt] ath79: use ARTIFACTS for initramfs-factory of ELECOM devices   LEDE Commits
• [openwrt/openwrt] ath79: use NVMEM for wlan caldata on ELECOM devices   LEDE Commits
• [openwrt/openwrt] base-files: accept gzipped nand sysupgrade images   LEDE Commits
• [openwrt/openwrt] base-files: add helper functions for adding wlan device entries to board.json   LEDE Commits
• [openwrt/openwrt] base-files: add protocol qmi/mbim support for ucidef_set_interface()   LEDE Commits
• [openwrt/openwrt] base-files: bring back nand_do_upgrade_success   LEDE Commits
• [openwrt/openwrt] base-files: fix and clean up nand sysupgrade code   LEDE Commits
• [openwrt/openwrt] base-files: fix ubinized nand sysupgrade   LEDE Commits
• [openwrt/openwrt] base-files: verify nand sysupgrade images   LEDE Commits
• [openwrt/openwrt] base-files: wifi: for wifi reconf, scan_wifi after network reload   LEDE Commits
• [openwrt/openwrt] base-files: wifi: for wifi up, scan_wifi after network reload   LEDE Commits
• [openwrt/openwrt] bcm4908: add pending BQL support for bcm4908_enet   LEDE Commits
• [openwrt/openwrt] bcm4908: backport bcm4908_enet fix for NULL dereference   LEDE Commits
• [openwrt/openwrt] bcm4908: backport bcm4908_enet fix for NULL dereference   LEDE Commits
• [openwrt/openwrt] bcm4908: optimize Ethernet driver by using build_skb()   LEDE Commits
• [openwrt/openwrt] bcm4908: optimize Ethernet driver by using build_skb()   LEDE Commits
• [openwrt/openwrt] bcm53xx: 5.10: refresh target patches   LEDE Commits
• [openwrt/openwrt] bcm53xx: backport clk driver fix for DT nodes names   LEDE Commits
• [openwrt/openwrt] bcm53xx: backport clk driver fix for DT nodes names   LEDE Commits
• [openwrt/openwrt] bcm53xx: enable Broadcom 4366b1 firmware for Asus RT-AC88U   LEDE Commits
• [openwrt/openwrt] bcm53xx: enable Broadcom 4366b1 firmware for Asus RT-AC88U   LEDE Commits
• [openwrt/openwrt] bcm53xx: linksys ea6500-v2: extend RAM to full 256MB   LEDE Commits
• [openwrt/openwrt] bcm53xx: only fixup seama on D-Link DIR-885L   LEDE Commits
• [openwrt/openwrt] bpf: check llvm version only when used   LEDE Commits
• [openwrt/openwrt] build: add support for python3.11 and higher   LEDE Commits
• [openwrt/openwrt] build: image: use printf for ModelNameLimit16   LEDE Commits
• [openwrt/openwrt] build: move Build/edimax-header to image-commands.mk   LEDE Commits
• [openwrt/openwrt] build: prefer HTTPS if available (for packages)   LEDE Commits
• [openwrt/openwrt] busybox: nslookup: ensure unique transaction IDs for the DNS queries   LEDE Commits
• [openwrt/openwrt] busybox: nslookup: ensure unique transaction IDs for the DNS queries   LEDE Commits
• [openwrt/openwrt] button-hotplug: simplify build   LEDE Commits
• [openwrt/openwrt] CI: Add workaround for github uppercase usernames   LEDE Commits
• [openwrt/openwrt] CI: bump actions/checkout action to v3   LEDE Commits
• [openwrt/openwrt] CI: bump actions/download,upload-artifact action to v3   LEDE Commits
• [openwrt/openwrt] CI: kernel: check if patch are refreshed for each target   LEDE Commits
• [openwrt/openwrt] CI: kernel: fix deprecation of set-output   LEDE Commits
• [openwrt/openwrt] CI: kernel: generate ccache cache on kernel push   LEDE Commits
• [openwrt/openwrt] ci: kernel: trigger build check on changes in kernel.mk as well   LEDE Commits
• [openwrt/openwrt] CI: kernel: use ccache to speedup workflow   LEDE Commits
• [openwrt/openwrt] CI: labeler: target major version of labeler action   LEDE Commits
• [openwrt/openwrt] CI: packages: Add github CI job to build all packages   LEDE Commits
• [openwrt/openwrt] CI: tools: compile tools with ccache support for tools container   LEDE Commits
• [openwrt/openwrt] ethtool: update to 6.0   LEDE Commits
• [openwrt/openwrt] expat: update to 2.5.0   LEDE Commits
• [openwrt/openwrt] firewall4: update to latest Git HEAD   LEDE Commits
• [openwrt/openwrt] firewall4: update to latest Git HEAD   LEDE Commits
• [openwrt/openwrt] firewall4: update to latest Git HEAD   LEDE Commits
• [openwrt/openwrt] firewall4: update to latest Git HEAD   LEDE Commits
• [openwrt/openwrt] firmware: intel-microcode: update to 20220809   LEDE Commits
• [openwrt/openwrt] firmware: intel-microcode: update to 20220809   LEDE Commits
• [openwrt/openwrt] fstools: update to git HEAD   LEDE Commits
• [openwrt/openwrt] gdb: add patch adding support for readline 8.2   LEDE Commits
• [openwrt/openwrt] generic: 5.10: refresh backport patches   LEDE Commits
• [openwrt/openwrt] generic: 5.10: refresh hack patches   LEDE Commits
• [openwrt/openwrt] generic: 5.15: add missing CMDLINE_OVERRIDE patch   LEDE Commits
• [openwrt/openwrt] generic: 5.15: add missing tag for some backports patches   LEDE Commits
• [openwrt/openwrt] generic: 5.15: backport qca8k fixup patches for Big-Endian systems   LEDE Commits
• [openwrt/openwrt] generic: 5.15: backport qcom smem patch for reserved-space support   LEDE Commits
• [openwrt/openwrt] generic: 5.15: backport smempart parser fixup patch with EPROBE_DEFER error   LEDE Commits
• [openwrt/openwrt] generic: 5.15: move bluetooth mt79 usb id patch from pending to backport   LEDE Commits
• [openwrt/openwrt] generic: 5.15: move dtc drop interrupt check from pending to backport   LEDE Commits
• [openwrt/openwrt] generic: 5.15: move MGLRU patches from pending to backport   LEDE Commits
• [openwrt/openwrt] generic: 5.15: move MIPS cpuinfo patch from pending to backport   LEDE Commits
• [openwrt/openwrt] generic: 5.15: move mtk eth soc patch from pending to backport   LEDE Commits
• [openwrt/openwrt] generic: 5.15: move mvebu aardvark patch from pending to backport   LEDE Commits
• [openwrt/openwrt] generic: 5.15: move not backport patch to pending dir   LEDE Commits
• [openwrt/openwrt] generic: 5.15: move pending xtx nand patch from pending to backport   LEDE Commits
• [openwrt/openwrt] generic: 5.15: move sfp HALNy patch from pending to backport   LEDE Commits
• [openwrt/openwrt] generic: 5.15: move ZTE MF286D modem patch from pending to backport   LEDE Commits
• [openwrt/openwrt] generic: 5.15: refresh backport patches   LEDE Commits
• [openwrt/openwrt] generic: 5.15: refresh hack patches   LEDE Commits
• [openwrt/openwrt] gettext-full: update to 0.21.1   LEDE Commits
• [openwrt/openwrt] hostapd: add measurement report value for beacon reports   LEDE Commits
• [openwrt/openwrt] image: always rebuild kernel loaders   LEDE Commits
• [openwrt/openwrt] image: always rebuild kernel loaders   LEDE Commits
• [openwrt/openwrt] ipq40xx: add DSA switch driver   LEDE Commits
• [openwrt/openwrt] ipq40xx: add IPQESS ethernet driver   LEDE Commits
• [openwrt/openwrt] ipq40xx: add PSGMII PHY mode define   LEDE Commits
• [openwrt/openwrt] ipq40xx: add shinfo based DSA tag driver   LEDE Commits
• [openwrt/openwrt] ipq40xx: add support for MikroTik hAP ac3 LTE6 kit   LEDE Commits
• [openwrt/openwrt] ipq40xx: Convert Google Wifi to DSA, reenable   LEDE Commits
• [openwrt/openwrt] ipq40xx: Convert mikrotik,wap-ac to DSA   LEDE Commits
• [openwrt/openwrt] ipq40xx: convert some boards to DSA   LEDE Commits
• [openwrt/openwrt] ipq40xx: convert to DSA and enable asus,rt-ac42u   LEDE Commits
• [openwrt/openwrt] ipq40xx: convert to DSA and enable mobipromo,cm520-79f   LEDE Commits
• [openwrt/openwrt] ipq40xx: convert to DSA and enable Netgear Orbi devices   LEDE Commits
• [openwrt/openwrt] ipq40xx: convert to DSA and enable Sony NCP-HG100/Cellular   LEDE Commits
• [openwrt/openwrt] ipq40xx: disable boards not converted to DSA   LEDE Commits
• [openwrt/openwrt] ipq40xx: disable nodes instead of deleting them   LEDE Commits
• [openwrt/openwrt] ipq40xx: drop ESSEDMA + AR40xx   LEDE Commits
• [openwrt/openwrt] ipq40xx: drop ESSEDMA + AR40xx DTS nodes   LEDE Commits
• [openwrt/openwrt] ipq40xx: enable ethernet and DSA driver combo   LEDE Commits
• [openwrt/openwrt] ipq40xx: Fix wrong GPIO for internal status LED on ZTE MF289F   LEDE Commits
• [openwrt/openwrt] ipq40xx: glinet-b1300: fix LAN and WAN MAC address assigments   LEDE Commits
• [openwrt/openwrt] ipq40xx: import qca8k from generic   LEDE Commits
• [openwrt/openwrt] ipq40xx: ipqess: enable threaded NAPI   LEDE Commits
• [openwrt/openwrt] ipq40xx: luma_wrtq-329acn: convert to DSA   LEDE Commits
• [openwrt/openwrt] ipq40xx: Meraki MR33: convert MAC addresses to nvmem   LEDE Commits
• [openwrt/openwrt] ipq40xx: pakedge_wr-1: convert to DSA   LEDE Commits
• [openwrt/openwrt] ipq40xx: qca807x: add SFP improvements   LEDE Commits
• [openwrt/openwrt] ipq40xx: qca807x: add suspend and resume ops   LEDE Commits
• [openwrt/openwrt] ipq40xx: qca807x: always set PSGMII AZ WAR   LEDE Commits
• [openwrt/openwrt] ipq40xx: qca807x: drop kernel version checks   LEDE Commits
• [openwrt/openwrt] ipq40xx: qca8k: introduce proper PSGMII calibration   LEDE Commits
• [openwrt/openwrt] ipq40xx: remove non-converted network configs   LEDE Commits
• [openwrt/openwrt] ipq40xx: sxtsq-5-ac: correct TCSR ESS type   LEDE Commits
• [openwrt/openwrt] ipq40xx: ZTE MF289F: convert to DSA   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: add 6.1 tag to upstream patch   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: add boot-partitions binding to fix block warning   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: add clk krait fixes/improvement patch   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: add krait-cc modernization patch and fixup   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: add krait clock modernization patch   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: add new version of cache cpu scaling driver   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: backport devfreq new cpufreq based PASSIVE governor   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: backport qcom_nandc patch for unprotected spare data fix   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: backport qcom clk fixes for krait and hfpll   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: drop mmc-ddr-1_8v from sdcc1 node   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: enable again usb node for each device   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: enable new devfreq scaling driver in config   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: refresh target patches   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: remove PCI_DOMAINS patch not needed anymore   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: remove qcom adm Documentation patch   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: remove useless spm patch   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: renumber tsens patch with new order   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: replace dtsi patches with upstream version   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: replace fab scaling patch with devfreq driver   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: replace gcc fixes with upstream version   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: replace lcc patch with upstream version   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: replace nandc patch with upstream version   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: replace stmmac pcs fix with upstream version   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: revert unwanted DSA conversion for ASRock G10   LEDE Commits
• [openwrt/openwrt] ipq806x: 5.15: rework nand_pins for wg2600hp3 dts   LEDE Commits
• [openwrt/openwrt] ipq806x: disable ea8500 image by default   LEDE Commits
• [openwrt/openwrt] ipq806x: disable ea8500 image by default   LEDE Commits
• [openwrt/openwrt] ipq806x: split files dir to 5.10 and 5.15   LEDE Commits
• [openwrt/openwrt] ipq806x: switch to 5.15 kernel by default   LEDE Commits
• [openwrt/openwrt] iproute2: update to 6.0.0   LEDE Commits
• [openwrt/openwrt] iwinfo: update to the latest version   LEDE Commits
• [openwrt/openwrt] kernel: add # CONFIG_ARM64_ERRATUM_1742098   LEDE Commits
• [openwrt/openwrt] kernel: add # CONFIG_ARM64_ERRATUM_2441007 symbol   LEDE Commits
• [openwrt/openwrt] kernel: add kmod-nvme package   LEDE Commits
• [openwrt/openwrt] kernel: add missing config symbols for 5.15   LEDE Commits
• [openwrt/openwrt] kernel: add missing config symbols for 5.15   LEDE Commits
• [openwrt/openwrt] kernel: Add missing kernel configuration options   LEDE Commits
• [openwrt/openwrt] kernel: add missing lockdep config symbols for 5.15   LEDE Commits
• [openwrt/openwrt] kernel: add support for mediatek NMBM flash mapping support   LEDE Commits
• [openwrt/openwrt] kernel: backport gnu11 upgrade   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.144   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.145   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.145   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.146   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.146   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.147   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.147   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.148   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.148   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.149   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.149   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.150   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.151   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.10 to 5.10.152   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.15 to 5.15.70   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.15 to 5.15.71   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.15 to 5.15.72   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.15 to 5.15.73   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.15 to 5.15.74   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.15 to 5.15.75   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.15 to 5.15.76   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.215   LEDE Commits
• [openwrt/openwrt] kernel: bump 5.4 to 5.4.219   LEDE Commits
• [openwrt/openwrt] kernel: disable CONFIG_CPU_LITTLE_ENDIAN in generic config   LEDE Commits
• [openwrt/openwrt] kernel: disable kmod-fs-ntfs3 for Linux 5.10   LEDE Commits
• [openwrt/openwrt] kernel: disable stack validation for external module builds as needed   LEDE Commits
• [openwrt/openwrt] kernel: fix possible mtd NULL pointer dereference   LEDE Commits
• [openwrt/openwrt] kernel: fix possible mtd NULL pointer dereference   LEDE Commits
• [openwrt/openwrt] kernel: fix possible mtd NULL pointer dereference   LEDE Commits
• [openwrt/openwrt] kernel: ltq-adsl-mei: Fix compilation with Linux 5.15   LEDE Commits
• [openwrt/openwrt] kernel: ltq-deu: Fix compilation with Linux 5.15   LEDE Commits
• [openwrt/openwrt] kernel: ltq-tapi: Fix compilation with Linux 5.15   LEDE Commits
• [openwrt/openwrt] kernel: ltq-vdsl-vr9-mei: Fix compilation with Linux 5.15   LEDE Commits
• [openwrt/openwrt] kernel: ltq-vmmc: Fix compilation with Linux 5.15   LEDE Commits
• [openwrt/openwrt] kernel: modules: iio: create and use AddDepends   LEDE Commits
• [openwrt/openwrt] kernel: move mac-address-ascii patches to generic   LEDE Commits
• [openwrt/openwrt] kernel: mtd: backport extended dynamic partitions support   LEDE Commits
• [openwrt/openwrt] kernel: mtd: backport extended dynamic partitions support   LEDE Commits
• [openwrt/openwrt] kernel: mtd: backport extended dynamic partitions support   LEDE Commits
• [openwrt/openwrt] kernel: mtd: backport SafeLoader parser   LEDE Commits
• [openwrt/openwrt] kernel: mtd: backport SafeLoader parser   LEDE Commits
• [openwrt/openwrt] kernel: mtd: fix unbalanced of_node_put() in dynamic partitions code   LEDE Commits
• [openwrt/openwrt] kernel: mtd: fix unbalanced of_node_put() in dynamic partitions code   LEDE Commits
• [openwrt/openwrt] kernel: mtd: fix unbalanced of_node_put() in dynamic partitions code   LEDE Commits
• [openwrt/openwrt] kernel: mtdsplit: support UBI after FIT images   LEDE Commits
• [openwrt/openwrt] kernel: mtk_bmt: add debugfs file to attempt repair of remapped sectors   LEDE Commits
• [openwrt/openwrt] kernel: mtk_bmt: allow get_mapping_block to return an error   LEDE Commits
• [openwrt/openwrt] kernel: mtk_bmt: fix block copying on remap with bmt v2   LEDE Commits
• [openwrt/openwrt] kernel: mtk_bmt: on error, do not attempt to remap out-of-range blocks   LEDE Commits
• [openwrt/openwrt] kernel: mtk_bmt: skip bitflip check if threshold isn't set   LEDE Commits
• [openwrt/openwrt] kernel: refresh backport-5.15 patches   LEDE Commits
• [openwrt/openwrt] kernel: remove CONFIG_GPIO_MCP23S08 from default kernel configs   LEDE Commits
• [openwrt/openwrt] kernel: remove handling of xfrm[4|6]_mode_* modules   LEDE Commits
• [openwrt/openwrt] kernel: remove target specific CONFIG_IKCONFIG lines   LEDE Commits
• [openwrt/openwrt] kernel: replace gpio-mcp23s08 with pinctrl-mcp23s08*   LEDE Commits
• [openwrt/openwrt] kernel: split up mtk_bmt driver code   LEDE Commits
• [openwrt/openwrt] kernel: test for kernel version greater 5.13 to fix mmc-spi   LEDE Commits
• [openwrt/openwrt] kernel: x86: Add glue_helper.ko only on kernel < 5.12   LEDE Commits
• [openwrt/openwrt] ksmbd: update to 3.4.6   LEDE Commits
• [openwrt/openwrt] lantiq: 5.15: refresh patches   LEDE Commits
• [openwrt/openwrt] lantiq: add 6.1 tag to upstream patch   LEDE Commits
• [openwrt/openwrt] lantiq: Add Linux 5.15 as testing kernel version   LEDE Commits
• [openwrt/openwrt] lantiq: add rgmii delays on BT Home Hub 5A   LEDE Commits
• [openwrt/openwrt] lantiq: dts: vr9: Add missing properties to the CPU port on the switch   LEDE Commits
• [openwrt/openwrt] lantiq: enable interrupts on second VPEs   LEDE Commits
• [openwrt/openwrt] layerscape: armv8_64b: add CONFIG_ARM64_ERRATUM_1742098   LEDE Commits
• [openwrt/openwrt] libbsd: update to 0.11.7   LEDE Commits
• [openwrt/openwrt] libcap: update to 2.66   LEDE Commits
• [openwrt/openwrt] libnftnl: add package CPE ID   LEDE Commits
• [openwrt/openwrt] libnftnl: add package CPE ID   LEDE Commits
• [openwrt/openwrt] libnl-tiny: update to the latest version   LEDE Commits
• [openwrt/openwrt] libtraceevent: update to 1.6.3   LEDE Commits
• [openwrt/openwrt] libtracefs: update to 1.5.0   LEDE Commits
• [openwrt/openwrt] libubox: update to the latest version   LEDE Commits
• [openwrt/openwrt] linux-firmware: update to 20221012   LEDE Commits
• [openwrt/openwrt] ltq-ifxos: add compatibility with kernel 5.15   LEDE Commits
• [openwrt/openwrt] ltq-vdsl-vr9-app: extend ubus call to provide DSL statistics   LEDE Commits
• [openwrt/openwrt] ltq-vdsl-vr9-app: skip invalid line status values   LEDE Commits
• [openwrt/openwrt] mac80211: add patch that gives the driver more control over netdev offloads   LEDE Commits
• [openwrt/openwrt] mac80211: backport security fix and disable MBSSID support   LEDE Commits
• [openwrt/openwrt] mac80211: backport security fixes   LEDE Commits
• [openwrt/openwrt] mac80211: backport security fixes   LEDE Commits
• [openwrt/openwrt] mac80211: change default ifname to <phy>-<type><index>   LEDE Commits
• [openwrt/openwrt] mac80211: change the default config for a renamed wiphy   LEDE Commits
• [openwrt/openwrt] mac80211: fix compile error when mesh is disabled   LEDE Commits
• [openwrt/openwrt] mac80211: fix detecting highest radio* config section index   LEDE Commits
• [openwrt/openwrt] mac80211: fix issues in HE capabilities   LEDE Commits
• [openwrt/openwrt] mac80211: fix issues with receiving small STP packets   LEDE Commits
• [openwrt/openwrt] mac80211: fix masking nested A-MSDU support for mesh   LEDE Commits
• [openwrt/openwrt] mac80211: fix typo in netifd script   LEDE Commits
• [openwrt/openwrt] mac80211: mask nested A-MSDU support for mesh   LEDE Commits
• [openwrt/openwrt] mac80211: merge upstream fixes   LEDE Commits
• [openwrt/openwrt] mac80211: rename phy according to board.json entries on bringup   LEDE Commits
• [openwrt/openwrt] mac80211: sync rx STP fix with updated version   LEDE Commits
• [openwrt/openwrt] mac80211: Update to version 5.10.149-1   LEDE Commits
• [openwrt/openwrt] mac80211: Update to version 5.15.74-1   LEDE Commits
• [openwrt/openwrt] mac80211: Update to version 5.15.74-1   LEDE Commits
• [openwrt/openwrt] mac80211: use board.json provided phy names in generated default config   LEDE Commits
• [openwrt/openwrt] mac80211: use KERNEL_MAKEOPTS instead of KERNEL_MAKE_FLAGS   LEDE Commits
• [openwrt/openwrt] mediatek: add Xiaomi Redmi Router AX6000 support   LEDE Commits
• [openwrt/openwrt] mediatek: clean up mt7622 kernel config   LEDE Commits
• [openwrt/openwrt] mediatek: clean up platform kernel modules   LEDE Commits
• [openwrt/openwrt] mediatek: consider adc_oe thermal calibration value in efuse   LEDE Commits
• [openwrt/openwrt] mediatek: don't break auxadc without 32k clk   LEDE Commits
• [openwrt/openwrt] mediatek: fill wlan device entries in board.json on mt7622   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: add support for hw i2c, pwm and thermal   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: consolidate adc '32k' clock   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: don't rely on image preset in flash or sysupgrade   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: enable thermal, I2C and PWM of the BPi-R3   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: set correct PWM clock and clean thermal zone   LEDE Commits
• [openwrt/openwrt] mediatek: filogic: use UBI fast map to speed up boot   LEDE Commits
• [openwrt/openwrt] mediatek: mt7622: don't rely on existing image for sysupgrade   LEDE Commits
• [openwrt/openwrt] mediatek: mt7622: kernel config fixes   LEDE Commits
• [openwrt/openwrt] mediatek: mt7623: fix thermal zone   LEDE Commits
• [openwrt/openwrt] mediatek: update pending and rename merged patch   LEDE Commits
• [openwrt/openwrt] mpc85xx: add SPI kernel loader for TP-Link TL-WDR4900 v1   LEDE Commits
• [openwrt/openwrt] mpc85xx: add SPI kernel loader for TP-Link TL-WDR4900 v1   LEDE Commits
• [openwrt/openwrt] mpc85xx: fix unset kernel symbol   LEDE Commits
• [openwrt/openwrt] mpc85xx: p1010: make TP-Link WDR4900 v1 build again   LEDE Commits
• [openwrt/openwrt] mpc85xx: p1010: make TP-Link WDR4900 v1 build again   LEDE Commits
• [openwrt/openwrt] mt7621: hiwifi_hc5962: fix reboot loop by using LZMA loader   LEDE Commits
• [openwrt/openwrt] mt7621: hiwifi_hc5962: fix reboot loop by using LZMA loader   LEDE Commits
• [openwrt/openwrt] mt7621: netgear_ex6150: fix reboot loop by using LZMA loader   LEDE Commits
• [openwrt/openwrt] mt7621: netgear_ex6150: fix reboot loop by using LZMA loader   LEDE Commits
• [openwrt/openwrt] mt7622: switch default CPU governor to ondemand   LEDE Commits
• [openwrt/openwrt] mt76: update to the latest version   LEDE Commits
• [openwrt/openwrt] mtd-utils: update to 2.1.5   LEDE Commits
• [openwrt/openwrt] mvebu: cortexa72: add CONFIG_ARM64_ERRATUM_1742098   LEDE Commits
• [openwrt/openwrt] ncurses: add package CPE ID   LEDE Commits
• [openwrt/openwrt] ncurses: add package CPE ID   LEDE Commits
• [openwrt/openwrt] octeon: fix imagebuilder generation by introducing generic target   LEDE Commits
• [openwrt/openwrt] odhcp6c: respect 'delegate' option for 464XLAT sub-interface   LEDE Commits
• [openwrt/openwrt] odhcpd: update to git HEAD   LEDE Commits
• [openwrt/openwrt] OpenWrt v21.02.4: adjust config defaults   LEDE Commits
• [openwrt/openwrt] OpenWrt v21.02.4: revert to branch defaults   LEDE Commits
• [openwrt/openwrt] OpenWrt v21.02.5: adjust config defaults   LEDE Commits
• [openwrt/openwrt] OpenWrt v21.02.5: revert to branch defaults   LEDE Commits
• [openwrt/openwrt] OpenWrt v22.03.1: adjust config defaults   LEDE Commits
• [openwrt/openwrt] OpenWrt v22.03.1: revert to branch defaults   LEDE Commits
• [openwrt/openwrt] OpenWrt v22.03.2: adjust config defaults   LEDE Commits
• [openwrt/openwrt] OpenWrt v22.03.2: revert to branch defaults   LEDE Commits
• [openwrt/openwrt] oxnas: shuttle-kd20: fix thermal zone   LEDE Commits
• [openwrt/openwrt] oxnas: switch to Linux 5.15 and drop Linux 5.10   LEDE Commits
• [openwrt/openwrt] pistachio: refresh kernel patches   LEDE Commits
• [openwrt/openwrt] popt: update to 1.19   LEDE Commits
• [openwrt/openwrt] qoriq: fix typo in FEATURES   LEDE Commits
• [openwrt/openwrt] ramips: add A-040W-Q alternative name for MSG1500 X.00   LEDE Commits
• [openwrt/openwrt] ramips: add missing WAN LED for Xiaomi Mi Router 4A / 4C   LEDE Commits
• [openwrt/openwrt] ramips: add support for SNR SNR-CPE-ME2-Lite   LEDE Commits
• [openwrt/openwrt] ramips: add support for YunCore FAP640   LEDE Commits
• [openwrt/openwrt] ramips: add support for YunCore FAP690   LEDE Commits
• [openwrt/openwrt] ramips: add support for ZyXEL NWA50AX / NWA55AXE   LEDE Commits
• [openwrt/openwrt] ramips: Correct Unielec 01 and 06 dts wan macaddr byte location   LEDE Commits
• [openwrt/openwrt] ramips: enable LZMA loader to fix Linksys RE6500 boot   LEDE Commits
• [openwrt/openwrt] ramips: enable LZMA loader to fix Linksys RE6500 boot   LEDE Commits
• [openwrt/openwrt] ramips: enable support for mtk_bmt in the nand flash driver   LEDE Commits
• [openwrt/openwrt] ramips: fix switch setup for ASUS RT-AX53U   LEDE Commits
• [openwrt/openwrt] ramips: fix switch setup for ASUS RT-AX53U   LEDE Commits
• [openwrt/openwrt] ramips: fix WAN mac address allocation for Unielec 01 and 06 models   LEDE Commits
• [openwrt/openwrt] ramips: fix WAN mac address allocation for Unielec 01 and 06 models   LEDE Commits
• [openwrt/openwrt] ramips: fix ZyXEL NWA55AXE model name   LEDE Commits
• [openwrt/openwrt] ramips: kndrt31r19: set up wan interface by default   LEDE Commits
• [openwrt/openwrt] ramips: move mt7621_nand driver to files   LEDE Commits
• [openwrt/openwrt] ramips: mt7621: enable lzma-loader for Asus RT-N56U-B1   LEDE Commits
• [openwrt/openwrt] ramips: mt7621: enable lzma-loader for Asus RT-N56U-B1   LEDE Commits
• [openwrt/openwrt] ramips: mt7621_nand: initialize ECC_FDMADDR   LEDE Commits
• [openwrt/openwrt] ramips: mt7621_nand: reduce log verbosity   LEDE Commits
• [openwrt/openwrt] ramips: rt3883: enable lzma-loader for Belkin F9K1109v1   LEDE Commits
• [openwrt/openwrt] ramips: rt3883: enable lzma-loader for Belkin F9K1109v1   LEDE Commits
• [openwrt/openwrt] ramips: rt3883: enable lzma-loader for Belkin F9K1109v1   LEDE Commits
• [openwrt/openwrt] ramips: skip bbt scan on mt7621   LEDE Commits
• [openwrt/openwrt] ramips: use lzma-loader on JCG Q20   LEDE Commits
• [openwrt/openwrt] readline: update to 8.2   LEDE Commits
• [openwrt/openwrt] README: add download section   LEDE Commits
• [openwrt/openwrt] realtek: 5.10: refresh kernel patches   LEDE Commits
• [openwrt/openwrt] realtek: add debugfs node for L2 table   LEDE Commits
• [openwrt/openwrt] realtek: add missing of.h include in phy driver   LEDE Commits
• [openwrt/openwrt] realtek: avoid busy waiting for RTL839x PHY read/write   LEDE Commits
• [openwrt/openwrt] realtek: cleanup rtl83{8x,9x}_enable_learning/flood   LEDE Commits
• [openwrt/openwrt] realtek: consistently flood RMA frames   LEDE Commits
• [openwrt/openwrt] realtek: disable otto timer for RTL93xx targets   LEDE Commits
• [openwrt/openwrt] realtek: Fix CRC offloading for rtl83xx   LEDE Commits
• [openwrt/openwrt] realtek: fix place of fdb/mdb info messages   LEDE Commits
• [openwrt/openwrt] realtek: fix SMP startup   LEDE Commits
• [openwrt/openwrt] realtek: fix use of uninitialized sds_mode   LEDE Commits
• [openwrt/openwrt] realtek: reduce excessive logging for FDB operations   LEDE Commits
• [openwrt/openwrt] realtek: remove RTL839x path in RTL838x multicast   LEDE Commits
• [openwrt/openwrt] realtek: resurrect timer driver   LEDE Commits
• [openwrt/openwrt] realtek: separate lock of RTL8231 from phy driver   LEDE Commits
• [openwrt/openwrt] realtek: set up L2 table entries properly   LEDE Commits
• [openwrt/openwrt] realtek: SMP handling of R4K timer interrupts   LEDE Commits
• [openwrt/openwrt] realtek: swap *_phylink_mac_link_down() contents   LEDE Commits
• [openwrt/openwrt] realtek: timer driver: activate for RTL838X devices   LEDE Commits
• [openwrt/openwrt] realtek: timer driver: activate for RTL839X devices   LEDE Commits
• [openwrt/openwrt] realtek: timer driver: documentation   LEDE Commits
• [openwrt/openwrt] realtek: update SMP-related calls in prom_init()   LEDE Commits
• [openwrt/openwrt] realtek: use assisted learning on CPU port   LEDE Commits
• [openwrt/openwrt] realtek: use correct CAUSEF_DC macro in prom.c   LEDE Commits
• [openwrt/openwrt] realtek: use MIPS fw_init_cmdline()   LEDE Commits
• [openwrt/openwrt] Revert "at91:"   LEDE Commits
• [openwrt/openwrt] rockchip: armv8: add CONFIG_ARM64_ERRATUM_1742098   LEDE Commits
• [openwrt/openwrt] rockchip: refresh kernel 5.15 config   LEDE Commits
• [openwrt/openwrt] rockchip: switch to 5.15 kernel   LEDE Commits
• [openwrt/openwrt] rpcd: update to latest Git HEAD   LEDE Commits
• [openwrt/openwrt] rpcd: update to latest Git HEAD   LEDE Commits
• [openwrt/openwrt] rtl8812au-ct: Fix compile   LEDE Commits
• [openwrt/openwrt] rules.mk: move DOWNLOAD_CHECK_CERTIFICATE to include/download.mk   LEDE Commits
• [openwrt/openwrt] rules_mk: don't include wrapped bin with external toolchains   LEDE Commits
• [openwrt/openwrt] rules_mk: use gcc versions for external toolchain   LEDE Commits
• [openwrt/openwrt] scripts/download.pl: make the download tool configurable   LEDE Commits
• [openwrt/openwrt] scripts/download.pl: pass aria2 config in ENV only   LEDE Commits
• [openwrt/openwrt] scripts: ext-toolchain: actually probe libc type on config generation   LEDE Commits
• [openwrt/openwrt] scripts: ext-toolchain: add option to overwrite config   LEDE Commits
• [openwrt/openwrt] scripts: ext-toolchain: add support for info.mk in probe_cc   LEDE Commits
• [openwrt/openwrt] scripts: ext-toolchain: add support for musl   LEDE Commits
• [openwrt/openwrt] scripts: ext-toolchain: fix wrong prefix in print_config generation   LEDE Commits
• [openwrt/openwrt] scripts: fix missing character '0' issue in linksys image   LEDE Commits
• [openwrt/openwrt] target/at91: replace gpio-mcp23s08 with pinctrl-mcp23s08-spi update config   LEDE Commits
• [openwrt/openwrt] target/mxs: replace gpio-mcp23s08 with pinctrl-mcp23s08   LEDE Commits
• [openwrt/openwrt] thc-ipv6: update to 3.8   LEDE Commits
• [openwrt/openwrt] toolchain: gcc: Remove gcc 10.x support   LEDE Commits
• [openwrt/openwrt] toolchain: gcc: Remove gcc 8.x support   LEDE Commits
• [openwrt/openwrt] toolchain: Include ./include/fortify for external musl toolchain   LEDE Commits
• [openwrt/openwrt] toolchain: Select USE_SSTRIP with external musl toolchain   LEDE Commits
• [openwrt/openwrt] tools/bash: update to 5.2   LEDE Commits
• [openwrt/openwrt] tools/bc: update to 1.07.1   LEDE Commits
• [openwrt/openwrt] tools/ccache: update to 4.7   LEDE Commits
• [openwrt/openwrt] tools/ccache: update to 4.7.1   LEDE Commits
• [openwrt/openwrt] tools/ccache: update to 4.7.2   LEDE Commits
• [openwrt/openwrt] tools/cmake: update to 3.24.2   LEDE Commits
• [openwrt/openwrt] tools/dwarves: update to 1.24   LEDE Commits
• [openwrt/openwrt] tools/expat: switch to tar.xz to save bandwidth   LEDE Commits
• [openwrt/openwrt] tools/expat: update to 2.4.9   LEDE Commits
• [openwrt/openwrt] tools/genext2fs: Add dependency to libtool   LEDE Commits
• [openwrt/openwrt] tools/genext2fs: switch to codeload.github.com   LEDE Commits
• [openwrt/openwrt] tools/genext2fs: update to 1.5.0   LEDE Commits
• [openwrt/openwrt] tools/meson: backport WSL2 fix   LEDE Commits
• [openwrt/openwrt] tools/meson: backport WSL2 fix   LEDE Commits
• [openwrt/openwrt] tools/mkimage: bring back removed patches   LEDE Commits
• [openwrt/openwrt] tools/mkimage: update to 2022.10   LEDE Commits
• [openwrt/openwrt] tools/mtools: update to 4.0.41   LEDE Commits
• [openwrt/openwrt] tools/xz: update to 5.2.7   LEDE Commits
• [openwrt/openwrt] tools/zlib: update to 1.2.13   LEDE Commits
• [openwrt/openwrt] tools: add Host/Uninstall where possible   LEDE Commits
• [openwrt/openwrt] tools: remove implicit dependencies   LEDE Commits
• [openwrt/openwrt] trace-cmd: update to v3.1.3   LEDE Commits
• [openwrt/openwrt] trace-cmd: update to v3.1.4   LEDE Commits
• [openwrt/openwrt] treewide: fix security issues by bumping all packages using libwolfssl   LEDE Commits
• [openwrt/openwrt] treewide: fix security issues by bumping all packages using libwolfssl   LEDE Commits
• [openwrt/openwrt] treewide: fix security issues by bumping all packages using libwolfssl   LEDE Commits
• [openwrt/openwrt] uboot-envtools: mediatek/mt7622: don't rely on mapped rootfs   LEDE Commits
• [openwrt/openwrt] uboot-envtools: mediatek_filogic: fix BPi-R3 when no OS is installed   LEDE Commits
• [openwrt/openwrt] uboot-envtools: update to 2022.10   LEDE Commits
• [openwrt/openwrt] uboot-fritz4040: build FritzBox 7520 variant   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: fixes defconfig typo for Linksys E8450   LEDE Commits
• [openwrt/openwrt] uboot-mediatek: fixes defconfig typo for UniFi 6 LR   LEDE Commits
• [openwrt/openwrt] uboot-mvebu: add Methode eDPU support   LEDE Commits
• [openwrt/openwrt] uboot-mvebu: backport LibreSSL patches for older version of LibreSSL   LEDE Commits
• [openwrt/openwrt] uboot-mvebu: backport LibreSSL patches for older version of LibreSSL   LEDE Commits
• [openwrt/openwrt] uboot-mvebu: backport patch to fix compilation on non glibc system   LEDE Commits
• [openwrt/openwrt] uboot-mvebu: backport patch to fix compilation on non glibc system   LEDE Commits
• [openwrt/openwrt] uboot-mvebu: update to 2022.10   LEDE Commits
• [openwrt/openwrt] ucode: update to latest Git HEAD   LEDE Commits
• [openwrt/openwrt] ucode: update to latest Git HEAD   LEDE Commits
• [openwrt/openwrt] ucode: update to latest Git HEAD   LEDE Commits
• [openwrt/openwrt] ucode: update to latest Git HEAD   LEDE Commits
• [openwrt/openwrt] uhttpd: use acme hotplug   LEDE Commits
• [openwrt/openwrt] wireless-regdb: bump to 2022.06.06   LEDE Commits
• [openwrt/openwrt] wireless-regdb: update to 2022-08-12   LEDE Commits
• [openwrt/openwrt] wireless-regdb: update to version 2022.02.18   LEDE Commits
• [openwrt/openwrt] wireless-tools: add package CPE ID   LEDE Commits
• [openwrt/openwrt] wireless-tools: add package CPE ID   LEDE Commits
• [openwrt/openwrt] wolfssl: bump to 5.4.0   LEDE Commits
• [openwrt/openwrt] wolfssl: bump to 5.5.0   LEDE Commits
• [openwrt/openwrt] wolfssl: bump to 5.5.0   LEDE Commits
• [openwrt/openwrt] wolfssl: bump to v5.3.0-stable   LEDE Commits
• [openwrt/openwrt] wolfssl: fix TLSv1.3 RCE in uhttpd by using 5.5.1-stable (CVE-2022-39173)   LEDE Commits
• [openwrt/openwrt] wolfssl: fix TLSv1.3 RCE in uhttpd by using 5.5.1-stable (CVE-2022-39173)   LEDE Commits
• [openwrt/openwrt] wolfssl: refresh patches   LEDE Commits
• [openwrt/openwrt] x86: switch to 5.15 as default kernel   LEDE Commits

Last message date: Mon Oct 31 15:37:36 PDT 2022
Archived on: Mon Oct 31 15:37:42 PDT 2022

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...