[openwrt/openwrt] ramips: kndrt31r19: set up wan interface by default

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/47d58afbdf208f162026159e33c66bd3f4eb159d

commit 47d58afbdf208f162026159e33c66bd3f4eb159d
Author: Andrey Butirsky <butirsky at gmail.com>
AuthorDate: Sat Sep 10 01:57:20 2022 +0300

    ramips: kndrt31r19: set up wan interface by default
    
    The only WAN port of the device is it's modem, so set it up as such
    
    Signed-off-by: Andrey Butirsky <butirsky at gmail.com>
---
 target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
index 963a20c653..38ff38bac5 100644
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
@@ -117,6 +117,13 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "6 at eth0"
 		;;
+	kroks,kndrt31r19)
+		ucidef_add_switch "switch0" \
+			"0:lan" "6 at eth0"
+		ucidef_add_switch_attr "switch0" "enable" "false"
+		ucidef_set_interface_lan "eth0"
+		ucidef_set_interface "wan" device "/dev/cdc-wdm0" protocol "qmi"
+		;;
 	motorola,mwr03)
 		ucidef_add_switch "switch0" \
 			"1:lan" "2:lan" "3:lan" "0:wan" "6 at eth0"
@@ -132,7 +139,6 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6t at eth0"
 		;;
-	kroks,kndrt31r19|\
 	tplink,tl-mr3020-v3)
 		ucidef_add_switch "switch0" \
 			"0:lan" "6 at eth0"