[openwrt/openwrt] lantiq: enable interrupts on second VPEs

[LEDE Commits]

hauke pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/fbd33d61648ae8982fbada7ad3b6d8222b367ab5

commit fbd33d61648ae8982fbada7ad3b6d8222b367ab5
Author: Aleksander Jan Bajkowski <olek2 at wp.pl>
AuthorDate: Sat Sep 10 20:13:58 2022 +0200

    lantiq: enable interrupts on second VPEs
    
    This patch is needed to handle interrupts by the second VPE on the Lantiq
    ARX100, xRX200, xRX300 and xRX330 SoCs. Switching some ICU interrupts to
    the second VPE results in a hang. Currently, the vsmp_init_secondary()
    function is responsible for enabling these interrupts. It only enables
    Malta-specific interrupts (SW0, SW1, HW4 and HW5).
    
    The MIPS core has 8 interrupts defined. On Lantiq SoCs, hardware
    interrupts are wired to an ICU instance. Each VPE has an independent
    instance of the ICU. The mapping of the ICU interrupts is shown below:
    SW0(IP0) - IPI call,
    SW1(IP1) - IPI resched,
    HW0(IP2) - ICU 0-31,
    HW1(IP3) - ICU 32-63,
    HW2(IP4) - ICU 64-95,
    HW3(IP5) - ICU 96-127,
    HW4(IP6) - ICU 128-159,
    HW5(IP7) - timer.
    
    This patch enables all interrupt lines on the second VPE.
    
    This problem affects multithreaded SoCs with a custom interrupt controller.
    SOCs with 1004Kc core and newer use the MIPS GIC. At this point, I am aware
    that the Realtek RTL839x and RTL930x SoCs may need a similar fix. In the
    future, this may be replaced with some generic solution.
    
    Tested on Lantiq xRX200.
    
    Signed-off-by: Aleksander Jan Bajkowski <olek2 at wp.pl>
---
 ...-enable-all-hardware-interrupts-on-second.patch | 86 ++++++++++++++++++++++
 1 file changed, 86 insertions(+)

diff --git a/target/linux/lantiq/patches-5.10/0320-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch b/target/linux/lantiq/patches-5.10/0320-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch
new file mode 100644
index 0000000000..0ac9adfb96
--- /dev/null
+++ b/target/linux/lantiq/patches-5.10/0320-MIPS-lantiq-enable-all-hardware-interrupts-on-second.patch
@@ -0,0 +1,86 @@
+From 2025bc9c3a949b65bfd0601f727678b37962c6c5 Mon Sep 17 00:00:00 2001
+From: Aleksander Jan Bajkowski <olek2 at wp.pl>
+Date: Fri, 4 Jun 2021 18:27:58 +0200
+Subject: [PATCH] MIPS: lantiq: enable all hardware interrupts on second VPE
+
+This patch is needed to handle interrupts by the second VPE on the Lantiq
+ARX100, xRX200, xRX300 and xRX330 SoCs. Switching some ICU interrupts to
+the second VPE results in a hang. Currently, the vsmp_init_secondary()
+function is responsible for enabling these interrupts. It only enables
+Malta-specific interrupts (SW0, SW1, HW4 and HW5).
+
+The MIPS core has 8 interrupts defined. On Lantiq SoCs, hardware
+interrupts are wired to an ICU instance. Each VPE has an independent
+instance of the ICU. The mapping of the ICU interrupts is shown below:
+SW0(IP0) - IPI call,
+SW1(IP1) - IPI resched,
+HW0(IP2) - ICU 0-31,
+HW1(IP3) - ICU 32-63,
+HW2(IP4) - ICU 64-95,
+HW3(IP5) - ICU 96-127,
+HW4(IP6) - ICU 128-159,
+HW5(IP7) - timer.
+
+This patch enables all interrupt lines on the second VPE.
+
+This problem affects multithreaded SoCs with a custom interrupt controller.
+SOCs with 1004Kc core and newer use the MIPS GIC. At this point, I am aware
+that the Realtek RTL839x and RTL930x SoCs may need a similar fix. In the
+future, this may be replaced with some generic solution.
+
+Tested on Lantiq xRX200.
+
+Suggested-by: Thomas Bogendoerfer <tsbogend at alpha.franken.de>
+Signed-off-by: Aleksander Jan Bajkowski <olek2 at wp.pl>
+---
+ arch/mips/lantiq/prom.c | 26 ++++++++++++++++++++++++--
+ 1 file changed, 24 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/lantiq/prom.c
++++ b/arch/mips/lantiq/prom.c
+@@ -37,6 +37,14 @@ static struct ltq_soc_info soc_info;
+ /* for Multithreading (APRP), vpe.c will use it */
+ unsigned long cp0_memsize;
+ 
++/*
++ * These structs are used to override vsmp_init_secondary()
++ */
++#if defined(CONFIG_MIPS_MT_SMP)
++extern const struct plat_smp_ops vsmp_smp_ops;
++static struct plat_smp_ops lantiq_smp_ops;
++#endif
++
+ const char *get_system_type(void)
+ {
+ 	return soc_info.sys_type;
+@@ -100,6 +108,17 @@ void __init device_tree_init(void)
+ 	unflatten_and_copy_device_tree();
+ }
+ 
++#if defined(CONFIG_MIPS_MT_SMP)
++static void lantiq_init_secondary(void)
++{
++	/*
++	 * MIPS CPU startup function vsmp_init_secondary() will only
++	 * enable some of the interrupts for the second CPU/VPE.
++	 */
++	set_c0_status(ST0_IM);
++}
++#endif
++
+ void __init prom_init(void)
+ {
+ 	/* call the soc specific detetcion code and get it to fill soc_info */
+@@ -111,7 +130,10 @@ void __init prom_init(void)
+ 	prom_init_cmdline();
+ 
+ #if defined(CONFIG_MIPS_MT_SMP)
+-	if (register_vsmp_smp_ops())
+-		panic("failed to register_vsmp_smp_ops()");
++	if (cpu_has_mipsmt) {
++		lantiq_smp_ops = vsmp_smp_ops;
++		lantiq_smp_ops.init_secondary = lantiq_init_secondary;
++		register_smp_ops(&lantiq_smp_ops);
++	}
+ #endif
+ }