[openwrt/openwrt] ipq40xx: remove non-converted network configs

[LEDE Commits]

blocktrron pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/116feb4a1cadeeb15ec55b995d8a3fd3d2d9a959

commit 116feb4a1cadeeb15ec55b995d8a3fd3d2d9a959
Author: Robert Marko <robert.marko at sartura.hr>
AuthorDate: Wed Sep 7 12:06:47 2022 +0200

    ipq40xx: remove non-converted network configs
    
    Remove networking configs for non DSA converted boards in ipq40xx.
    Currently, they are just causing clutter.
    
    Signed-off-by: Robert Marko <robert.marko at sartura.hr>
---
 .../ipq40xx/base-files/etc/board.d/02_network      | 96 ----------------------
 1 file changed, 96 deletions(-)

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index f57e3fd5d2..3d05589369 100644
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -51,105 +51,9 @@ ipq40xx_setup_interfaces()
 	glinet,gl-b1300)
 		ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
 		;;
-	engenius,emr3500|\
-	engenius,ens620ext|\
-	luma,wrtq-329acn|\
-	plasmacloud,pa1200|\
-	plasmacloud,pa2200|\
-	sony,ncp-hg100-cellular)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		;;
-	aruba,ap-365|\
-	dlink,dap-2610 |\
-	engenius,eap1300|\
-	engenius,emd1|\
-	extreme-networks,ws-ap3915i|\
-	netgear,ex6100v2|\
-	netgear,ex6150v2|\
-	zyxel,wre6606)
-		ucidef_set_interface_lan "eth0"
-		;;
-	aruba,ap-303h|\
-	teltonika,rutx10)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u at eth0" "2:lan:1" "3:lan:2" "4:lan:3" "0u at eth1" "5:wan"
-		;;
-	edgecore,ecw5211|\
-	edgecore,oap100|\
-	google,wifi|\
-	openmesh,a42|\
-	openmesh,a62)
-		ucidef_set_interfaces_lan_wan "eth1" "eth0"
-		;;
-	asus,rt-ac42u)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u at eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
-		;;
-	avm,fritzrepeater-3000|\
-	linksys,whw01-v1)
-		ucidef_add_switch "switch0" \
-			"0u at eth0" "4:lan:1" "5:lan:2"
-		;;
-	compex,wpj419|\
-	compex,wpj428|\
-	engenius,eap2200|\
-	mikrotik,wap-ac)
-		ucidef_set_interface_lan "eth0 eth1"
-		;;
-	buffalo,wtr-m2133hp)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u at eth0" "2:lan:3" "3:lan:2" "4:lan:1"
-		;;
 	compex,wpj428)
 		ucidef_set_interface_lan "lan1 lan2"
 		;;
-	devolo,magic-2-wifi-next)
-		ucidef_set_interface_lan "eth0 eth1 eth2"
-		;;
-	ezviz,cs-w3-wd1200g-eup)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u at eth0" "2:lan:3" "3:lan:2" "4:lan:1" "0u at eth1" "5:wan"
-		;;
-	glinet,gl-ap1300 |\
-	glinet,gl-s1300)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u at eth0" "3:lan" "4:lan"
-		;;
-	mobipromo,cm520-79f)
-		ucidef_add_switch "switch0" \
-			"0u at eth0" "3:lan:2" "4:lan:1"
-		ucidef_set_interface_wan "eth1"
-		;;
-	netgear,rbr50|\
-	netgear,rbs50|\
-	netgear,srr60|\
-	netgear,srs60)
-		ucidef_add_switch "switch0" \
-			"0u at eth0" "2:lan" "3:lan" "4:lan"
-		ucidef_set_interface_wan "eth1"
-		;;
-	pakedge,wr-1)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u at eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0u at eth1" "5:wan"
-		;;
-	qxwlan,e2600ac-c1 |\
-	qxwlan,e2600ac-c2)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u at eth0" "3:lan" "4:lan" "0u at eth1" "5:wan"
-		;;
-	unielec,u4019-32m |\
-	tel,x1pro)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u at eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u at eth1" "5:wan"
-		;;
 	zte,mf286d)
 		ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan"
 		;;