[openwrt/openwrt] ipq40xx: drop ESSEDMA + AR40xx
LEDE Commits
lede-commits at lists.infradead.org
Sun Oct 2 14:05:37 PDT 2022
blocktrron pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/6d24d10f3db0a537b16ed5ca195bacdfb7dfb844
commit 6d24d10f3db0a537b16ed5ca195bacdfb7dfb844
Author: Robert Marko <robert.marko at sartura.hr>
AuthorDate: Mon Oct 25 18:33:32 2021 +0200
ipq40xx: drop ESSEDMA + AR40xx
In order to start working on IPQESS + DSA drop the old ESSEDMA + AR40xx
driver combo.
Remove the kernel symbols, disable swconfig and drop swconfig package
as they are not needed anymore.
Signed-off-by: Robert Marko <robert.marko at sartura.hr>
---
target/linux/ipq40xx/Makefile | 2 +-
target/linux/ipq40xx/config-5.10 | 4 -
target/linux/ipq40xx/config-5.15 | 4 -
.../drivers/net/ethernet/qualcomm/essedma/Makefile | 9 -
.../drivers/net/ethernet/qualcomm/essedma/edma.c | 2177 --------------------
.../drivers/net/ethernet/qualcomm/essedma/edma.h | 455 ----
.../net/ethernet/qualcomm/essedma/edma_axi.c | 1346 ------------
.../net/ethernet/qualcomm/essedma/edma_ethtool.c | 350 ----
.../net/ethernet/qualcomm/essedma/ess_edma.h | 389 ----
.../linux/ipq40xx/files/drivers/net/mdio/ar40xx.c | 1893 -----------------
.../linux/ipq40xx/files/drivers/net/mdio/ar40xx.h | 342 ---
.../702-dts-ipq4019-add-PHY-switch-nodes.patch | 46 -
...t-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch | 53 -
.../705-net-add-qualcomm-ar40xx-phy.patch | 27 -
...-net-add-qualcomm-essedma-ethernet-driver.patch | 37 -
...711-dts-ipq4019-add-ethernet-essedma-node.patch | 92 -
.../702-dts-ipq4019-add-PHY-switch-nodes.patch | 46 -
...t-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch | 53 -
.../705-net-add-qualcomm-ar40xx-phy.patch | 27 -
...-net-add-qualcomm-essedma-ethernet-driver.patch | 37 -
...711-dts-ipq4019-add-ethernet-essedma-node.patch | 92 -
21 files changed, 1 insertion(+), 7480 deletions(-)
diff --git a/target/linux/ipq40xx/Makefile b/target/linux/ipq40xx/Makefile
index 6eb9c00223..1da72664ad 100644
--- a/target/linux/ipq40xx/Makefile
+++ b/target/linux/ipq40xx/Makefile
@@ -15,7 +15,7 @@ KERNELNAME:=zImage Image dtbs
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += \
kmod-usb-dwc3-qcom \
- kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
+ kmod-leds-gpio kmod-gpio-button-hotplug \
kmod-ath10k-ct wpad-basic-wolfssl \
kmod-usb3 kmod-usb-dwc3 ath10k-firmware-qca4019-ct \
uboot-envtools
diff --git a/target/linux/ipq40xx/config-5.10 b/target/linux/ipq40xx/config-5.10
index 6d325bcaa2..3269e3f50f 100644
--- a/target/linux/ipq40xx/config-5.10
+++ b/target/linux/ipq40xx/config-5.10
@@ -1,7 +1,6 @@
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_APQ_GCC_8084 is not set
# CONFIG_APQ_MMCC_8084 is not set
-CONFIG_AR40XX_PHY=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_IPQ40XX=y
@@ -148,7 +147,6 @@ CONFIG_DYNAMIC_DEBUG=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EEPROM_AT24=y
-CONFIG_ESSEDMA=y
CONFIG_EXTCON=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
@@ -457,8 +455,6 @@ CONFIG_SPMI=y
CONFIG_SPMI_MSM_PMIC_ARB=y
# CONFIG_SPMI_PMIC_CLKDIV is not set
CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
CONFIG_SWPHY=y
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
diff --git a/target/linux/ipq40xx/config-5.15 b/target/linux/ipq40xx/config-5.15
index 82a3f9f8a3..4bfa4117fd 100644
--- a/target/linux/ipq40xx/config-5.15
+++ b/target/linux/ipq40xx/config-5.15
@@ -1,7 +1,6 @@
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_APQ_GCC_8084 is not set
# CONFIG_APQ_MMCC_8084 is not set
-CONFIG_AR40XX_PHY=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_IPQ40XX=y
@@ -149,7 +148,6 @@ CONFIG_DYNAMIC_DEBUG=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EEPROM_AT24=y
-CONFIG_ESSEDMA=y
CONFIG_EXTCON=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
@@ -466,8 +464,6 @@ CONFIG_SPMI=y
CONFIG_SPMI_MSM_PMIC_ARB=y
# CONFIG_SPMI_PMIC_CLKDIV is not set
CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
CONFIG_SWPHY=y
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
diff --git a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/Makefile b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/Makefile
deleted file mode 100644
index 4e6cd6505e..0000000000
--- a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-## Makefile for the Qualcomm Atheros ethernet edma driver
-#
-
-
-obj-$(CONFIG_ESSEDMA) += essedma.o
-
-essedma-objs := edma_axi.o edma.o edma_ethtool.o
-
diff --git a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma.c b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma.c
deleted file mode 100644
index 80db1f0acb..0000000000
--- a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma.c
+++ /dev/null
@@ -1,2177 +0,0 @@
-/*
- * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for
- * any purpose with or without fee is hereby granted, provided that the
- * above copyright notice and this permission notice appear in all copies.
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
- * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/platform_device.h>
-#include <linux/if_vlan.h>
-#include "ess_edma.h"
-#include "edma.h"
-
-extern struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED];
-bool edma_stp_rstp;
-u16 edma_ath_eth_type;
-
-/* edma_skb_priority_offset()
- * get edma skb priority
- */
-static unsigned int edma_skb_priority_offset(struct sk_buff *skb)
-{
- return (skb->priority >> 2) & 1;
-}
-
-/* edma_alloc_tx_ring()
- * Allocate Tx descriptors ring
- */
-static int edma_alloc_tx_ring(struct edma_common_info *edma_cinfo,
- struct edma_tx_desc_ring *etdr)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
-
- /* Initialize ring */
- etdr->size = sizeof(struct edma_sw_desc) * etdr->count;
- etdr->sw_next_to_fill = 0;
- etdr->sw_next_to_clean = 0;
-
- /* Allocate SW descriptors */
- etdr->sw_desc = vzalloc(etdr->size);
- if (!etdr->sw_desc) {
- dev_err(&pdev->dev, "buffer alloc of tx ring failed=%p", etdr);
- return -ENOMEM;
- }
-
- /* Allocate HW descriptors */
- etdr->hw_desc = dma_alloc_coherent(&pdev->dev, etdr->size, &etdr->dma,
- GFP_KERNEL);
- if (!etdr->hw_desc) {
- dev_err(&pdev->dev, "descriptor allocation for tx ring failed");
- vfree(etdr->sw_desc);
- return -ENOMEM;
- }
-
- return 0;
-}
-
-/* edma_free_tx_ring()
- * Free tx rings allocated by edma_alloc_tx_rings
- */
-static void edma_free_tx_ring(struct edma_common_info *edma_cinfo,
- struct edma_tx_desc_ring *etdr)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
-
- if (likely(etdr->dma))
- dma_free_coherent(&pdev->dev, etdr->size, etdr->hw_desc,
- etdr->dma);
-
- vfree(etdr->sw_desc);
- etdr->sw_desc = NULL;
-}
-
-/* edma_alloc_rx_ring()
- * allocate rx descriptor ring
- */
-static int edma_alloc_rx_ring(struct edma_common_info *edma_cinfo,
- struct edma_rfd_desc_ring *erxd)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
-
- erxd->size = sizeof(struct edma_sw_desc) * erxd->count;
- erxd->sw_next_to_fill = 0;
- erxd->sw_next_to_clean = 0;
-
- /* Allocate SW descriptors */
- erxd->sw_desc = vzalloc(erxd->size);
- if (!erxd->sw_desc)
- return -ENOMEM;
-
- /* Alloc HW descriptors */
- erxd->hw_desc = dma_alloc_coherent(&pdev->dev, erxd->size, &erxd->dma,
- GFP_KERNEL);
- if (!erxd->hw_desc) {
- vfree(erxd->sw_desc);
- return -ENOMEM;
- }
-
- /* Initialize pending_fill */
- erxd->pending_fill = 0;
-
- return 0;
-}
-
-/* edma_free_rx_ring()
- * Free rx ring allocated by alloc_rx_ring
- */
-static void edma_free_rx_ring(struct edma_common_info *edma_cinfo,
- struct edma_rfd_desc_ring *rxdr)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
-
- if (likely(rxdr->dma))
- dma_free_coherent(&pdev->dev, rxdr->size, rxdr->hw_desc,
- rxdr->dma);
-
- vfree(rxdr->sw_desc);
- rxdr->sw_desc = NULL;
-}
-
-/* edma_configure_tx()
- * Configure transmission control data
- */
-static void edma_configure_tx(struct edma_common_info *edma_cinfo)
-{
- u32 txq_ctrl_data;
-
- txq_ctrl_data = (EDMA_TPD_BURST << EDMA_TXQ_NUM_TPD_BURST_SHIFT);
- txq_ctrl_data |= EDMA_TXQ_CTRL_TPD_BURST_EN;
- txq_ctrl_data |= (EDMA_TXF_BURST << EDMA_TXQ_TXF_BURST_NUM_SHIFT);
- edma_write_reg(EDMA_REG_TXQ_CTRL, txq_ctrl_data);
-}
-
-
-/* edma_configure_rx()
- * configure reception control data
- */
-static void edma_configure_rx(struct edma_common_info *edma_cinfo)
-{
- struct edma_hw *hw = &edma_cinfo->hw;
- u32 rss_type, rx_desc1, rxq_ctrl_data;
-
- /* Set RSS type */
- rss_type = hw->rss_type;
- edma_write_reg(EDMA_REG_RSS_TYPE, rss_type);
-
- /* Set RFD burst number */
- rx_desc1 = (EDMA_RFD_BURST << EDMA_RXQ_RFD_BURST_NUM_SHIFT);
-
- /* Set RFD prefetch threshold */
- rx_desc1 |= (EDMA_RFD_THR << EDMA_RXQ_RFD_PF_THRESH_SHIFT);
-
- /* Set RFD in host ring low threshold to generte interrupt */
- rx_desc1 |= (EDMA_RFD_LTHR << EDMA_RXQ_RFD_LOW_THRESH_SHIFT);
- edma_write_reg(EDMA_REG_RX_DESC1, rx_desc1);
-
- /* Set Rx FIFO threshold to start to DMA data to host */
- rxq_ctrl_data = EDMA_FIFO_THRESH_128_BYTE;
-
- /* Set RX remove vlan bit */
- rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN;
-
- edma_write_reg(EDMA_REG_RXQ_CTRL, rxq_ctrl_data);
-}
-
-/* edma_alloc_rx_buf()
- * does skb allocation for the received packets.
- */
-static int edma_alloc_rx_buf(struct edma_common_info
- *edma_cinfo,
- struct edma_rfd_desc_ring *erdr,
- int cleaned_count, int queue_id)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
- struct edma_rx_free_desc *rx_desc;
- struct edma_sw_desc *sw_desc;
- struct sk_buff *skb;
- unsigned int i;
- u16 prod_idx, length;
- u32 reg_data;
-
- if (cleaned_count > erdr->count)
- cleaned_count = erdr->count - 1;
-
- i = erdr->sw_next_to_fill;
-
- while (cleaned_count) {
- sw_desc = &erdr->sw_desc[i];
- length = edma_cinfo->rx_head_buffer_len;
-
- if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_REUSE) {
- skb = sw_desc->skb;
-
- /* Clear REUSE Flag */
- sw_desc->flags &= ~EDMA_SW_DESC_FLAG_SKB_REUSE;
- } else {
- /* alloc skb */
- skb = netdev_alloc_skb_ip_align(edma_netdev[0], length);
- if (!skb) {
- /* Better luck next round */
- break;
- }
- }
-
- if (edma_cinfo->page_mode) {
- struct page *pg = alloc_page(GFP_ATOMIC);
-
- if (!pg) {
- dev_kfree_skb_any(skb);
- break;
- }
-
- sw_desc->dma = dma_map_page(&pdev->dev, pg, 0,
- edma_cinfo->rx_page_buffer_len,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(&pdev->dev,
- sw_desc->dma)) {
- __free_page(pg);
- dev_kfree_skb_any(skb);
- break;
- }
-
- skb_fill_page_desc(skb, 0, pg, 0,
- edma_cinfo->rx_page_buffer_len);
- sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_FRAG;
- sw_desc->length = edma_cinfo->rx_page_buffer_len;
- } else {
- sw_desc->dma = dma_map_single(&pdev->dev, skb->data,
- length, DMA_FROM_DEVICE);
- if (dma_mapping_error(&pdev->dev,
- sw_desc->dma)) {
- dev_kfree_skb_any(skb);
- break;
- }
-
- sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_HEAD;
- sw_desc->length = length;
- }
-
- /* Update the buffer info */
- sw_desc->skb = skb;
- rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[i]);
- rx_desc->buffer_addr = cpu_to_le64(sw_desc->dma);
- if (++i == erdr->count)
- i = 0;
- cleaned_count--;
- }
-
- erdr->sw_next_to_fill = i;
-
- if (i == 0)
- prod_idx = erdr->count - 1;
- else
- prod_idx = i - 1;
-
- /* Update the producer index */
- edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), ®_data);
- reg_data &= ~EDMA_RFD_PROD_IDX_BITS;
- reg_data |= prod_idx;
- edma_write_reg(EDMA_REG_RFD_IDX_Q(queue_id), reg_data);
-
- /* If we couldn't allocate all the buffers
- * we increment the alloc failure counters
- */
- if (cleaned_count)
- edma_cinfo->edma_ethstats.rx_alloc_fail_ctr++;
-
- return cleaned_count;
-}
-
-/* edma_init_desc()
- * update descriptor ring size, buffer and producer/consumer index
- */
-static void edma_init_desc(struct edma_common_info *edma_cinfo)
-{
- struct edma_rfd_desc_ring *rfd_ring;
- struct edma_tx_desc_ring *etdr;
- int i = 0, j = 0;
- u32 data = 0;
- u16 hw_cons_idx = 0;
-
- /* Set the base address of every TPD ring. */
- for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
- etdr = edma_cinfo->tpd_ring[i];
-
- /* Update descriptor ring base address */
- edma_write_reg(EDMA_REG_TPD_BASE_ADDR_Q(i), (u32)etdr->dma);
- edma_read_reg(EDMA_REG_TPD_IDX_Q(i), &data);
-
- /* Calculate hardware consumer index */
- hw_cons_idx = (data >> EDMA_TPD_CONS_IDX_SHIFT) & 0xffff;
- etdr->sw_next_to_fill = hw_cons_idx;
- etdr->sw_next_to_clean = hw_cons_idx;
- data &= ~(EDMA_TPD_PROD_IDX_MASK << EDMA_TPD_PROD_IDX_SHIFT);
- data |= hw_cons_idx;
-
- /* update producer index */
- edma_write_reg(EDMA_REG_TPD_IDX_Q(i), data);
-
- /* update SW consumer index register */
- edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(i), hw_cons_idx);
-
- /* Set TPD ring size */
- edma_write_reg(EDMA_REG_TPD_RING_SIZE,
- edma_cinfo->tx_ring_count &
- EDMA_TPD_RING_SIZE_MASK);
- }
-
- for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
- rfd_ring = edma_cinfo->rfd_ring[j];
- /* Update Receive Free descriptor ring base address */
- edma_write_reg(EDMA_REG_RFD_BASE_ADDR_Q(j),
- (u32)(rfd_ring->dma));
- j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
- }
-
- data = edma_cinfo->rx_head_buffer_len;
- if (edma_cinfo->page_mode)
- data = edma_cinfo->rx_page_buffer_len;
-
- data &= EDMA_RX_BUF_SIZE_MASK;
- data <<= EDMA_RX_BUF_SIZE_SHIFT;
-
- /* Update RFD ring size and RX buffer size */
- data |= (edma_cinfo->rx_ring_count & EDMA_RFD_RING_SIZE_MASK)
- << EDMA_RFD_RING_SIZE_SHIFT;
-
- edma_write_reg(EDMA_REG_RX_DESC0, data);
-
- /* Disable TX FIFO low watermark and high watermark */
- edma_write_reg(EDMA_REG_TXF_WATER_MARK, 0);
-
- /* Load all of base address above */
- edma_read_reg(EDMA_REG_TX_SRAM_PART, &data);
- data |= 1 << EDMA_LOAD_PTR_SHIFT;
- edma_write_reg(EDMA_REG_TX_SRAM_PART, data);
-}
-
-/* edma_receive_checksum
- * Api to check checksum on receive packets
- */
-static void edma_receive_checksum(struct edma_rx_return_desc *rd,
- struct sk_buff *skb)
-{
- skb_checksum_none_assert(skb);
-
- /* check the RRD IP/L4 checksum bit to see if
- * its set, which in turn indicates checksum
- * failure.
- */
- if (rd->rrd6 & EDMA_RRD_CSUM_FAIL_MASK)
- return;
-
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-}
-
-/* edma_clean_rfd()
- * clean up rx resourcers on error
- */
-static void edma_clean_rfd(struct edma_rfd_desc_ring *erdr, u16 index)
-{
- struct edma_rx_free_desc *rx_desc;
- struct edma_sw_desc *sw_desc;
-
- rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[index]);
- sw_desc = &erdr->sw_desc[index];
- if (sw_desc->skb) {
- dev_kfree_skb_any(sw_desc->skb);
- sw_desc->skb = NULL;
- }
-
- memset(rx_desc, 0, sizeof(struct edma_rx_free_desc));
-}
-
-/* edma_rx_complete_fraglist()
- * Complete Rx processing for fraglist skbs
- */
-static void edma_rx_complete_stp_rstp(struct sk_buff *skb, int port_id, struct edma_rx_return_desc *rd)
-{
- int i;
- u32 priority;
- u16 port_type;
- u8 mac_addr[EDMA_ETH_HDR_LEN];
-
- port_type = (rd->rrd1 >> EDMA_RRD_PORT_TYPE_SHIFT)
- & EDMA_RRD_PORT_TYPE_MASK;
- /* if port type is 0x4, then only proceed with
- * other stp/rstp calculation
- */
- if (port_type == EDMA_RX_ATH_HDR_RSTP_PORT_TYPE) {
- u8 bpdu_mac[6] = {0x01, 0x80, 0xc2, 0x00, 0x00, 0x00};
-
- /* calculate the frame priority */
- priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT)
- & EDMA_RRD_PRIORITY_MASK;
-
- for (i = 0; i < EDMA_ETH_HDR_LEN; i++)
- mac_addr[i] = skb->data[i];
-
- /* Check if destination mac addr is bpdu addr */
- if (!memcmp(mac_addr, bpdu_mac, 6)) {
- /* destination mac address is BPDU
- * destination mac address, then add
- * atheros header to the packet.
- */
- u16 athr_hdr = (EDMA_RX_ATH_HDR_VERSION << EDMA_RX_ATH_HDR_VERSION_SHIFT) |
- (priority << EDMA_RX_ATH_HDR_PRIORITY_SHIFT) |
- (EDMA_RX_ATH_HDR_RSTP_PORT_TYPE << EDMA_RX_ATH_PORT_TYPE_SHIFT) | port_id;
- skb_push(skb, 4);
- memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN);
- *(uint16_t *)&skb->data[12] = htons(edma_ath_eth_type);
- *(uint16_t *)&skb->data[14] = htons(athr_hdr);
- }
- }
-}
-
-/*
- * edma_rx_complete_fraglist()
- * Complete Rx processing for fraglist skbs
- */
-static int edma_rx_complete_fraglist(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean,
- u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
- struct edma_hw *hw = &edma_cinfo->hw;
- struct sk_buff *skb_temp;
- struct edma_sw_desc *sw_desc;
- int i;
- u16 size_remaining;
-
- skb->data_len = 0;
- skb->tail += (hw->rx_head_buff_size - 16);
- skb->len = skb->truesize = length;
- size_remaining = length - (hw->rx_head_buff_size - 16);
-
- /* clean-up all related sw_descs */
- for (i = 1; i < num_rfds; i++) {
- struct sk_buff *skb_prev;
- sw_desc = &erdr->sw_desc[sw_next_to_clean];
- skb_temp = sw_desc->skb;
-
- dma_unmap_single(&pdev->dev, sw_desc->dma,
- sw_desc->length, DMA_FROM_DEVICE);
-
- if (size_remaining < hw->rx_head_buff_size)
- skb_put(skb_temp, size_remaining);
- else
- skb_put(skb_temp, hw->rx_head_buff_size);
-
- /*
- * If we are processing the first rfd, we link
- * skb->frag_list to the skb corresponding to the
- * first RFD
- */
- if (i == 1)
- skb_shinfo(skb)->frag_list = skb_temp;
- else
- skb_prev->next = skb_temp;
- skb_prev = skb_temp;
- skb_temp->next = NULL;
-
- skb->data_len += skb_temp->len;
- size_remaining -= skb_temp->len;
-
- /* Increment SW index */
- sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
- (*cleaned_count)++;
- }
-
- return sw_next_to_clean;
-}
-
-/* edma_rx_complete_paged()
- * Complete Rx processing for paged skbs
- */
-static int edma_rx_complete_paged(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean,
- u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
- struct sk_buff *skb_temp;
- struct edma_sw_desc *sw_desc;
- int i;
- u16 size_remaining;
-
- skb_frag_t *frag = &skb_shinfo(skb)->frags[0];
-
- /* Setup skbuff fields */
- skb->len = length;
-
- if (likely(num_rfds <= 1)) {
- skb->data_len = length;
- skb->truesize += edma_cinfo->rx_page_buffer_len;
- skb_fill_page_desc(skb, 0, skb_frag_page(frag),
- 16, length);
- } else {
- skb_frag_size_sub(frag, 16);
- skb->data_len = skb_frag_size(frag);
- skb->truesize += edma_cinfo->rx_page_buffer_len;
- size_remaining = length - skb_frag_size(frag);
-
- skb_fill_page_desc(skb, 0, skb_frag_page(frag),
- 16, skb_frag_size(frag));
-
- /* clean-up all related sw_descs */
- for (i = 1; i < num_rfds; i++) {
- sw_desc = &erdr->sw_desc[sw_next_to_clean];
- skb_temp = sw_desc->skb;
- frag = &skb_shinfo(skb_temp)->frags[0];
- dma_unmap_page(&pdev->dev, sw_desc->dma,
- sw_desc->length, DMA_FROM_DEVICE);
-
- if (size_remaining < edma_cinfo->rx_page_buffer_len)
- skb_frag_size_set(frag, size_remaining);
-
- skb_fill_page_desc(skb, i, skb_frag_page(frag),
- 0, skb_frag_size(frag));
-
- skb_shinfo(skb_temp)->nr_frags = 0;
- dev_kfree_skb_any(skb_temp);
-
- skb->data_len += skb_frag_size(frag);
- skb->truesize += edma_cinfo->rx_page_buffer_len;
- size_remaining -= skb_frag_size(frag);
-
- /* Increment SW index */
- sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
- (*cleaned_count)++;
- }
- }
-
- return sw_next_to_clean;
-}
-
-/*
- * edma_rx_complete()
- * Main api called from the poll function to process rx packets.
- */
-static u16 edma_rx_complete(struct edma_common_info *edma_cinfo,
- int *work_done, int work_to_do, int queue_id,
- struct napi_struct *napi)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
- struct edma_rfd_desc_ring *erdr = edma_cinfo->rfd_ring[queue_id];
- struct net_device *netdev;
- struct edma_adapter *adapter;
- struct edma_sw_desc *sw_desc;
- struct sk_buff *skb;
- struct edma_rx_return_desc *rd;
- u16 hash_type, rrd[8], cleaned_count = 0, length = 0, num_rfds = 1,
- sw_next_to_clean, hw_next_to_clean = 0, vlan = 0, ret_count = 0;
- u32 data = 0;
- u8 *vaddr;
- int port_id, i, drop_count = 0;
- u32 priority;
- u16 count = erdr->count, rfd_avail;
- u8 queue_to_rxid[8] = {0, 0, 1, 1, 2, 2, 3, 3};
-
- cleaned_count = erdr->pending_fill;
- sw_next_to_clean = erdr->sw_next_to_clean;
-
- edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data);
- hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) &
- EDMA_RFD_CONS_IDX_MASK;
-
- do {
- while (sw_next_to_clean != hw_next_to_clean) {
- if (!work_to_do)
- break;
-
- sw_desc = &erdr->sw_desc[sw_next_to_clean];
- skb = sw_desc->skb;
-
- /* Unmap the allocated buffer */
- if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD))
- dma_unmap_single(&pdev->dev, sw_desc->dma,
- sw_desc->length, DMA_FROM_DEVICE);
- else
- dma_unmap_page(&pdev->dev, sw_desc->dma,
- sw_desc->length, DMA_FROM_DEVICE);
-
- /* Get RRD */
- if (edma_cinfo->page_mode) {
- vaddr = kmap_atomic(skb_frag_page(&skb_shinfo(skb)->frags[0]));
- memcpy((uint8_t *)&rrd[0], vaddr, 16);
- rd = (struct edma_rx_return_desc *)rrd;
- kunmap_atomic(vaddr);
- } else {
- rd = (struct edma_rx_return_desc *)skb->data;
- }
-
- /* Check if RRD is valid */
- if (!(rd->rrd7 & EDMA_RRD_DESC_VALID)) {
- edma_clean_rfd(erdr, sw_next_to_clean);
- sw_next_to_clean = (sw_next_to_clean + 1) &
- (erdr->count - 1);
- cleaned_count++;
- continue;
- }
-
- /* Get the number of RFDs from RRD */
- num_rfds = rd->rrd1 & EDMA_RRD_NUM_RFD_MASK;
-
- /* Get Rx port ID from switch */
- port_id = (rd->rrd1 >> EDMA_PORT_ID_SHIFT) & EDMA_PORT_ID_MASK;
- if ((!port_id) || (port_id > EDMA_MAX_PORTID_SUPPORTED)) {
- dev_err(&pdev->dev, "Invalid RRD source port bit set");
- for (i = 0; i < num_rfds; i++) {
- edma_clean_rfd(erdr, sw_next_to_clean);
- sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
- cleaned_count++;
- }
- continue;
- }
-
- /* check if we have a sink for the data we receive.
- * If the interface isn't setup, we have to drop the
- * incoming data for now.
- */
- netdev = edma_cinfo->portid_netdev_lookup_tbl[port_id];
- if (!netdev) {
- edma_clean_rfd(erdr, sw_next_to_clean);
- sw_next_to_clean = (sw_next_to_clean + 1) &
- (erdr->count - 1);
- cleaned_count++;
- continue;
- }
- adapter = netdev_priv(netdev);
-
- /* This code is added to handle a usecase where high
- * priority stream and a low priority stream are
- * received simultaneously on DUT. The problem occurs
- * if one of the Rx rings is full and the corresponding
- * core is busy with other stuff. This causes ESS CPU
- * port to backpressure all incoming traffic including
- * high priority one. We monitor free descriptor count
- * on each CPU and whenever it reaches threshold (< 80),
- * we drop all low priority traffic and let only high
- * priotiy traffic pass through. We can hence avoid
- * ESS CPU port to send backpressure on high priroity
- * stream.
- */
- priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT)
- & EDMA_RRD_PRIORITY_MASK;
- if (likely(!priority && !edma_cinfo->page_mode && (num_rfds <= 1))) {
- rfd_avail = (count + sw_next_to_clean - hw_next_to_clean - 1) & (count - 1);
- if (rfd_avail < EDMA_RFD_AVAIL_THR) {
- sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_REUSE;
- sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
- adapter->stats.rx_dropped++;
- cleaned_count++;
- drop_count++;
- if (drop_count == 3) {
- work_to_do--;
- (*work_done)++;
- drop_count = 0;
- }
- if (cleaned_count >= EDMA_RX_BUFFER_WRITE) {
- /* If buffer clean count reaches 16, we replenish HW buffers. */
- ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
- edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
- sw_next_to_clean);
- cleaned_count = ret_count;
- erdr->pending_fill = ret_count;
- }
- continue;
- }
- }
-
- work_to_do--;
- (*work_done)++;
-
- /* Increment SW index */
- sw_next_to_clean = (sw_next_to_clean + 1) &
- (erdr->count - 1);
-
- cleaned_count++;
-
- /* Get the packet size and allocate buffer */
- length = rd->rrd6 & EDMA_RRD_PKT_SIZE_MASK;
-
- if (edma_cinfo->page_mode) {
- /* paged skb */
- sw_next_to_clean = edma_rx_complete_paged(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo);
- if (!pskb_may_pull(skb, ETH_HLEN)) {
- dev_kfree_skb_any(skb);
- continue;
- }
- } else {
- /* single or fraglist skb */
-
- /* Addition of 16 bytes is required, as in the packet
- * first 16 bytes are rrd descriptors, so actual data
- * starts from an offset of 16.
- */
- skb_reserve(skb, 16);
- if (likely((num_rfds <= 1) || !edma_cinfo->fraglist_mode)) {
- skb_put(skb, length);
- } else {
- sw_next_to_clean = edma_rx_complete_fraglist(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo);
- }
- }
-
- if (edma_stp_rstp) {
- edma_rx_complete_stp_rstp(skb, port_id, rd);
- }
-
- skb->protocol = eth_type_trans(skb, netdev);
-
- /* Record Rx queue for RFS/RPS and fill flow hash from HW */
- skb_record_rx_queue(skb, queue_to_rxid[queue_id]);
- if (netdev->features & NETIF_F_RXHASH) {
- hash_type = (rd->rrd5 >> EDMA_HASH_TYPE_SHIFT);
- if ((hash_type > EDMA_HASH_TYPE_START) && (hash_type < EDMA_HASH_TYPE_END))
- skb_set_hash(skb, rd->rrd2, PKT_HASH_TYPE_L4);
- }
-
-#ifdef CONFIG_NF_FLOW_COOKIE
- skb->flow_cookie = rd->rrd3 & EDMA_RRD_FLOW_COOKIE_MASK;
-#endif
- edma_receive_checksum(rd, skb);
-
- /* Process VLAN HW acceleration indication provided by HW */
- if (unlikely(adapter->default_vlan_tag != rd->rrd4)) {
- vlan = rd->rrd4;
- if (likely(rd->rrd7 & EDMA_RRD_CVLAN))
- __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan);
- else if (rd->rrd1 & EDMA_RRD_SVLAN)
- __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021AD), vlan);
- }
-
- /* Update rx statistics */
- adapter->stats.rx_packets++;
- adapter->stats.rx_bytes += length;
-
- /* Check if we reached refill threshold */
- if (cleaned_count >= EDMA_RX_BUFFER_WRITE) {
- ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
- edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
- sw_next_to_clean);
- cleaned_count = ret_count;
- erdr->pending_fill = ret_count;
- }
-
- /* At this point skb should go to stack */
- napi_gro_receive(napi, skb);
- }
-
- /* Check if we still have NAPI budget */
- if (!work_to_do)
- break;
-
- /* Read index once again since we still have NAPI budget */
- edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data);
- hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) &
- EDMA_RFD_CONS_IDX_MASK;
- } while (hw_next_to_clean != sw_next_to_clean);
-
- erdr->sw_next_to_clean = sw_next_to_clean;
-
- /* Refill here in case refill threshold wasn't reached */
- if (likely(cleaned_count)) {
- ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
- erdr->pending_fill = ret_count;
- if (ret_count) {
- if (net_ratelimit())
- dev_dbg(&pdev->dev, "Not all buffers was reallocated");
- }
-
- edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
- erdr->sw_next_to_clean);
- }
-
- return erdr->pending_fill;
-}
-
-/* edma_delete_rfs_filter()
- * Remove RFS filter from switch
- */
-static int edma_delete_rfs_filter(struct edma_adapter *adapter,
- struct edma_rfs_filter_node *filter_node)
-{
- int res = -1;
-
- struct flow_keys *keys = &filter_node->keys;
-
- if (likely(adapter->set_rfs_rule))
- res = (*adapter->set_rfs_rule)(adapter->netdev,
- flow_get_u32_src(keys), flow_get_u32_dst(keys),
- keys->ports.src, keys->ports.dst,
- keys->basic.ip_proto, filter_node->rq_id, 0);
-
- return res;
-}
-
-/* edma_add_rfs_filter()
- * Add RFS filter to switch
- */
-static int edma_add_rfs_filter(struct edma_adapter *adapter,
- struct flow_keys *keys, u16 rq,
- struct edma_rfs_filter_node *filter_node)
-{
- int res = -1;
-
- struct flow_keys *dest_keys = &filter_node->keys;
-
- memcpy(dest_keys, &filter_node->keys, sizeof(*dest_keys));
-/*
- dest_keys->control = keys->control;
- dest_keys->basic = keys->basic;
- dest_keys->addrs = keys->addrs;
- dest_keys->ports = keys->ports;
- dest_keys.ip_proto = keys->ip_proto;
-*/
- /* Call callback registered by ESS driver */
- if (likely(adapter->set_rfs_rule))
- res = (*adapter->set_rfs_rule)(adapter->netdev, flow_get_u32_src(keys),
- flow_get_u32_dst(keys), keys->ports.src, keys->ports.dst,
- keys->basic.ip_proto, rq, 1);
-
- return res;
-}
-
-/* edma_rfs_key_search()
- * Look for existing RFS entry
- */
-static struct edma_rfs_filter_node *edma_rfs_key_search(struct hlist_head *h,
- struct flow_keys *key)
-{
- struct edma_rfs_filter_node *p;
-
- hlist_for_each_entry(p, h, node)
- if (flow_get_u32_src(&p->keys) == flow_get_u32_src(key) &&
- flow_get_u32_dst(&p->keys) == flow_get_u32_dst(key) &&
- p->keys.ports.src == key->ports.src &&
- p->keys.ports.dst == key->ports.dst &&
- p->keys.basic.ip_proto == key->basic.ip_proto)
- return p;
- return NULL;
-}
-
-/* edma_initialise_rfs_flow_table()
- * Initialise EDMA RFS flow table
- */
-static void edma_initialise_rfs_flow_table(struct edma_adapter *adapter)
-{
- int i;
-
- spin_lock_init(&adapter->rfs.rfs_ftab_lock);
-
- /* Initialize EDMA flow hash table */
- for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++)
- INIT_HLIST_HEAD(&adapter->rfs.hlist_head[i]);
-
- adapter->rfs.max_num_filter = EDMA_RFS_FLOW_ENTRIES;
- adapter->rfs.filter_available = adapter->rfs.max_num_filter;
- adapter->rfs.hashtoclean = 0;
-
- /* Add timer to get periodic RFS updates from OS */
- timer_setup(&adapter->rfs.expire_rfs, edma_flow_may_expire, 0);
- mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4);
-}
-
-/* edma_free_rfs_flow_table()
- * Free EDMA RFS flow table
- */
-static void edma_free_rfs_flow_table(struct edma_adapter *adapter)
-{
- int i;
-
- /* Remove sync timer */
- del_timer_sync(&adapter->rfs.expire_rfs);
- spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
-
- /* Free EDMA RFS table entries */
- adapter->rfs.filter_available = 0;
-
- /* Clean-up EDMA flow hash table */
- for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++) {
- struct hlist_head *hhead;
- struct hlist_node *tmp;
- struct edma_rfs_filter_node *filter_node;
- int res;
-
- hhead = &adapter->rfs.hlist_head[i];
- hlist_for_each_entry_safe(filter_node, tmp, hhead, node) {
- res = edma_delete_rfs_filter(adapter, filter_node);
- if (res < 0)
- dev_warn(&adapter->netdev->dev,
- "EDMA going down but RFS entry %d not allowed to be flushed by Switch",
- filter_node->flow_id);
- hlist_del(&filter_node->node);
- kfree(filter_node);
- }
- }
- spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
-}
-
-/* edma_tx_unmap_and_free()
- * clean TX buffer
- */
-static inline void edma_tx_unmap_and_free(struct platform_device *pdev,
- struct edma_sw_desc *sw_desc)
-{
- struct sk_buff *skb = sw_desc->skb;
-
- if (likely((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD) ||
- (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAGLIST)))
- /* unmap_single for skb head area */
- dma_unmap_single(&pdev->dev, sw_desc->dma,
- sw_desc->length, DMA_TO_DEVICE);
- else if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG)
- /* unmap page for paged fragments */
- dma_unmap_page(&pdev->dev, sw_desc->dma,
- sw_desc->length, DMA_TO_DEVICE);
-
- if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_LAST))
- dev_kfree_skb_any(skb);
-
- sw_desc->flags = 0;
-}
-
-/* edma_tx_complete()
- * Used to clean tx queues and update hardware and consumer index
- */
-static void edma_tx_complete(struct edma_common_info *edma_cinfo, int queue_id)
-{
- struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
- struct edma_sw_desc *sw_desc;
- struct platform_device *pdev = edma_cinfo->pdev;
- int i;
-
- u16 sw_next_to_clean = etdr->sw_next_to_clean;
- u16 hw_next_to_clean;
- u32 data = 0;
-
- edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &data);
- hw_next_to_clean = (data >> EDMA_TPD_CONS_IDX_SHIFT) & EDMA_TPD_CONS_IDX_MASK;
-
- /* clean the buffer here */
- while (sw_next_to_clean != hw_next_to_clean) {
- sw_desc = &etdr->sw_desc[sw_next_to_clean];
- edma_tx_unmap_and_free(pdev, sw_desc);
- sw_next_to_clean = (sw_next_to_clean + 1) & (etdr->count - 1);
- }
-
- etdr->sw_next_to_clean = sw_next_to_clean;
-
- /* update the TPD consumer index register */
- edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(queue_id), sw_next_to_clean);
-
- /* Wake the queue if queue is stopped and netdev link is up */
- for (i = 0; i < EDMA_MAX_NETDEV_PER_QUEUE && etdr->nq[i] ; i++) {
- if (netif_tx_queue_stopped(etdr->nq[i])) {
- if ((etdr->netdev[i]) && netif_carrier_ok(etdr->netdev[i]))
- netif_tx_wake_queue(etdr->nq[i]);
- }
- }
-}
-
-/* edma_get_tx_buffer()
- * Get sw_desc corresponding to the TPD
- */
-static struct edma_sw_desc *edma_get_tx_buffer(struct edma_common_info *edma_cinfo,
- struct edma_tx_desc *tpd, int queue_id)
-{
- struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
- return &etdr->sw_desc[tpd - (struct edma_tx_desc *)etdr->hw_desc];
-}
-
-/* edma_get_next_tpd()
- * Return a TPD descriptor for transfer
- */
-static struct edma_tx_desc *edma_get_next_tpd(struct edma_common_info *edma_cinfo,
- int queue_id)
-{
- struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
- u16 sw_next_to_fill = etdr->sw_next_to_fill;
- struct edma_tx_desc *tpd_desc =
- (&((struct edma_tx_desc *)(etdr->hw_desc))[sw_next_to_fill]);
-
- etdr->sw_next_to_fill = (etdr->sw_next_to_fill + 1) & (etdr->count - 1);
-
- return tpd_desc;
-}
-
-/* edma_tpd_available()
- * Check number of free TPDs
- */
-static inline u16 edma_tpd_available(struct edma_common_info *edma_cinfo,
- int queue_id)
-{
- struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
-
- u16 sw_next_to_fill;
- u16 sw_next_to_clean;
- u16 count = 0;
-
- sw_next_to_clean = etdr->sw_next_to_clean;
- sw_next_to_fill = etdr->sw_next_to_fill;
-
- if (likely(sw_next_to_clean <= sw_next_to_fill))
- count = etdr->count;
-
- return count + sw_next_to_clean - sw_next_to_fill - 1;
-}
-
-/* edma_tx_queue_get()
- * Get the starting number of the queue
- */
-static inline int edma_tx_queue_get(struct edma_adapter *adapter,
- struct sk_buff *skb, int txq_id)
-{
- /* skb->priority is used as an index to skb priority table
- * and based on packet priority, correspong queue is assigned.
- */
- return adapter->tx_start_offset[txq_id] + edma_skb_priority_offset(skb);
-}
-
-/* edma_tx_update_hw_idx()
- * update the producer index for the ring transmitted
- */
-static void edma_tx_update_hw_idx(struct edma_common_info *edma_cinfo,
- struct sk_buff *skb, int queue_id)
-{
- struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
- u32 tpd_idx_data;
-
- /* Read and update the producer index */
- edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &tpd_idx_data);
- tpd_idx_data &= ~EDMA_TPD_PROD_IDX_BITS;
- tpd_idx_data |= (etdr->sw_next_to_fill & EDMA_TPD_PROD_IDX_MASK)
- << EDMA_TPD_PROD_IDX_SHIFT;
-
- edma_write_reg(EDMA_REG_TPD_IDX_Q(queue_id), tpd_idx_data);
-}
-
-/* edma_rollback_tx()
- * Function to retrieve tx resources in case of error
- */
-static void edma_rollback_tx(struct edma_adapter *adapter,
- struct edma_tx_desc *start_tpd, int queue_id)
-{
- struct edma_tx_desc_ring *etdr = adapter->edma_cinfo->tpd_ring[queue_id];
- struct edma_sw_desc *sw_desc;
- struct edma_tx_desc *tpd = NULL;
- u16 start_index, index;
-
- start_index = start_tpd - (struct edma_tx_desc *)(etdr->hw_desc);
-
- index = start_index;
- while (index != etdr->sw_next_to_fill) {
- tpd = (&((struct edma_tx_desc *)(etdr->hw_desc))[index]);
- sw_desc = &etdr->sw_desc[index];
- edma_tx_unmap_and_free(adapter->pdev, sw_desc);
- memset(tpd, 0, sizeof(struct edma_tx_desc));
- if (++index == etdr->count)
- index = 0;
- }
- etdr->sw_next_to_fill = start_index;
-}
-
-/* edma_tx_map_and_fill()
- * gets called from edma_xmit_frame
- *
- * This is where the dma of the buffer to be transmitted
- * gets mapped
- */
-static int edma_tx_map_and_fill(struct edma_common_info *edma_cinfo,
- struct edma_adapter *adapter, struct sk_buff *skb, int queue_id,
- unsigned int flags_transmit, u16 from_cpu, u16 dp_bitmap,
- bool packet_is_rstp, int nr_frags)
-{
- struct edma_sw_desc *sw_desc = NULL;
- struct platform_device *pdev = edma_cinfo->pdev;
- struct edma_tx_desc *tpd = NULL, *start_tpd = NULL;
- struct sk_buff *iter_skb;
- int i = 0;
- u32 word1 = 0, word3 = 0, lso_word1 = 0, svlan_tag = 0;
- u16 buf_len, lso_desc_len = 0;
-
- /* It should either be a nr_frags skb or fraglist skb but not both */
- BUG_ON(nr_frags && skb_has_frag_list(skb));
-
- if (skb_is_gso(skb)) {
- /* TODO: What additional checks need to be performed here */
- if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4) {
- lso_word1 |= EDMA_TPD_IPV4_EN;
- ip_hdr(skb)->check = 0;
- tcp_hdr(skb)->check = ~csum_tcpudp_magic(ip_hdr(skb)->saddr,
- ip_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
- } else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) {
- lso_word1 |= EDMA_TPD_LSO_V2_EN;
- ipv6_hdr(skb)->payload_len = 0;
- tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
- &ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
- } else
- return -EINVAL;
-
- lso_word1 |= EDMA_TPD_LSO_EN | ((skb_shinfo(skb)->gso_size & EDMA_TPD_MSS_MASK) << EDMA_TPD_MSS_SHIFT) |
- (skb_transport_offset(skb) << EDMA_TPD_HDR_SHIFT);
- } else if (flags_transmit & EDMA_HW_CHECKSUM) {
- u8 css, cso;
- cso = skb_checksum_start_offset(skb);
- css = cso + skb->csum_offset;
-
- word1 |= (EDMA_TPD_CUSTOM_CSUM_EN);
- word1 |= (cso >> 1) << EDMA_TPD_HDR_SHIFT;
- word1 |= ((css >> 1) << EDMA_TPD_CUSTOM_CSUM_SHIFT);
- }
-
- if (skb->protocol == htons(ETH_P_PPP_SES))
- word1 |= EDMA_TPD_PPPOE_EN;
-
- if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_FLAG) {
- switch(skb->vlan_proto) {
- case htons(ETH_P_8021Q):
- word3 |= (1 << EDMA_TX_INS_CVLAN);
- word3 |= skb_vlan_tag_get(skb) << EDMA_TX_CVLAN_TAG_SHIFT;
- break;
- case htons(ETH_P_8021AD):
- word1 |= (1 << EDMA_TX_INS_SVLAN);
- svlan_tag = skb_vlan_tag_get(skb) << EDMA_TX_SVLAN_TAG_SHIFT;
- break;
- default:
- dev_err(&pdev->dev, "no ctag or stag present\n");
- goto vlan_tag_error;
- }
- } else if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG) {
- word3 |= (1 << EDMA_TX_INS_CVLAN);
- word3 |= (adapter->default_vlan_tag) << EDMA_TX_CVLAN_TAG_SHIFT;
- }
-
- if (packet_is_rstp) {
- word3 |= dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT;
- word3 |= from_cpu << EDMA_TPD_FROM_CPU_SHIFT;
- } else {
- word3 |= adapter->dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT;
- }
-
- buf_len = skb_headlen(skb);
-
- if (lso_word1) {
- if (lso_word1 & EDMA_TPD_LSO_V2_EN) {
-
- /* IPv6 LSOv2 descriptor */
- start_tpd = tpd = edma_get_next_tpd(edma_cinfo, queue_id);
- sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
- sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_NONE;
-
- /* LSOv2 descriptor overrides addr field to pass length */
- tpd->addr = cpu_to_le16(skb->len);
- tpd->svlan_tag = svlan_tag;
- tpd->word1 = word1 | lso_word1;
- tpd->word3 = word3;
- }
-
- tpd = edma_get_next_tpd(edma_cinfo, queue_id);
- if (!start_tpd)
- start_tpd = tpd;
- sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
-
- /* The last buffer info contain the skb address,
- * so skb will be freed after unmap
- */
- sw_desc->length = lso_desc_len;
- sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
-
- sw_desc->dma = dma_map_single(&adapter->pdev->dev,
- skb->data, buf_len, DMA_TO_DEVICE);
- if (dma_mapping_error(&pdev->dev, sw_desc->dma))
- goto dma_error;
-
- tpd->addr = cpu_to_le32(sw_desc->dma);
- tpd->len = cpu_to_le16(buf_len);
-
- tpd->svlan_tag = svlan_tag;
- tpd->word1 = word1 | lso_word1;
- tpd->word3 = word3;
-
- /* The last buffer info contain the skb address,
- * so it will be freed after unmap
- */
- sw_desc->length = lso_desc_len;
- sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
-
- buf_len = 0;
- }
-
- if (likely(buf_len)) {
-
- /* TODO Do not dequeue descriptor if there is a potential error */
- tpd = edma_get_next_tpd(edma_cinfo, queue_id);
-
- if (!start_tpd)
- start_tpd = tpd;
-
- sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
-
- /* The last buffer info contain the skb address,
- * so it will be free after unmap
- */
- sw_desc->length = buf_len;
- sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
- sw_desc->dma = dma_map_single(&adapter->pdev->dev,
- skb->data, buf_len, DMA_TO_DEVICE);
- if (dma_mapping_error(&pdev->dev, sw_desc->dma))
- goto dma_error;
-
- tpd->addr = cpu_to_le32(sw_desc->dma);
- tpd->len = cpu_to_le16(buf_len);
-
- tpd->svlan_tag = svlan_tag;
- tpd->word1 = word1 | lso_word1;
- tpd->word3 = word3;
- }
-
- /* Walk through all paged fragments */
- while (nr_frags--) {
- skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
- buf_len = skb_frag_size(frag);
- tpd = edma_get_next_tpd(edma_cinfo, queue_id);
- sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
- sw_desc->length = buf_len;
- sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAG;
-
- sw_desc->dma = skb_frag_dma_map(&pdev->dev, frag, 0, buf_len, DMA_TO_DEVICE);
-
- if (dma_mapping_error(NULL, sw_desc->dma))
- goto dma_error;
-
- tpd->addr = cpu_to_le32(sw_desc->dma);
- tpd->len = cpu_to_le16(buf_len);
-
- tpd->svlan_tag = svlan_tag;
- tpd->word1 = word1 | lso_word1;
- tpd->word3 = word3;
- i++;
- }
-
- /* Walk through all fraglist skbs */
- skb_walk_frags(skb, iter_skb) {
- buf_len = iter_skb->len;
- tpd = edma_get_next_tpd(edma_cinfo, queue_id);
- sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
- sw_desc->length = buf_len;
- sw_desc->dma = dma_map_single(&adapter->pdev->dev,
- iter_skb->data, buf_len, DMA_TO_DEVICE);
-
- if (dma_mapping_error(NULL, sw_desc->dma))
- goto dma_error;
-
- tpd->addr = cpu_to_le32(sw_desc->dma);
- tpd->len = cpu_to_le16(buf_len);
- tpd->svlan_tag = svlan_tag;
- tpd->word1 = word1 | lso_word1;
- tpd->word3 = word3;
- sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAGLIST;
- }
-
- if (tpd)
- tpd->word1 |= 1 << EDMA_TPD_EOP_SHIFT;
-
- sw_desc->skb = skb;
- sw_desc->flags |= EDMA_SW_DESC_FLAG_LAST;
-
- return 0;
-
-dma_error:
- edma_rollback_tx(adapter, start_tpd, queue_id);
- dev_err(&pdev->dev, "TX DMA map failed\n");
-vlan_tag_error:
- return -ENOMEM;
-}
-
-/* edma_check_link()
- * check Link status
- */
-static int edma_check_link(struct edma_adapter *adapter)
-{
- struct phy_device *phydev = adapter->phydev;
-
- if (!(adapter->poll_required))
- return __EDMA_LINKUP;
-
- if (phydev->link)
- return __EDMA_LINKUP;
-
- return __EDMA_LINKDOWN;
-}
-
-/* edma_adjust_link()
- * check for edma link status
- */
-void edma_adjust_link(struct net_device *netdev)
-{
- int status;
- struct edma_adapter *adapter = netdev_priv(netdev);
- struct phy_device *phydev = adapter->phydev;
-
- if (!test_bit(__EDMA_UP, &adapter->state_flags))
- return;
-
- status = edma_check_link(adapter);
-
- if (status == __EDMA_LINKUP && adapter->link_state == __EDMA_LINKDOWN) {
- phy_print_status(phydev);
- adapter->link_state = __EDMA_LINKUP;
- if (adapter->edma_cinfo->is_single_phy) {
- ess_set_port_status_speed(adapter->edma_cinfo, phydev,
- ffs(adapter->dp_bitmap) - 1);
- }
- netif_carrier_on(netdev);
- if (netif_running(netdev))
- netif_tx_wake_all_queues(netdev);
- } else if (status == __EDMA_LINKDOWN && adapter->link_state == __EDMA_LINKUP) {
- phy_print_status(phydev);
- adapter->link_state = __EDMA_LINKDOWN;
- netif_carrier_off(netdev);
- netif_tx_stop_all_queues(netdev);
- }
-}
-
-/* edma_get_stats()
- * Statistics api used to retreive the tx/rx statistics
- */
-struct net_device_stats *edma_get_stats(struct net_device *netdev)
-{
- struct edma_adapter *adapter = netdev_priv(netdev);
-
- return &adapter->stats;
-}
-
-/* edma_xmit()
- * Main api to be called by the core for packet transmission
- */
-netdev_tx_t edma_xmit(struct sk_buff *skb,
- struct net_device *net_dev)
-{
- struct edma_adapter *adapter = netdev_priv(net_dev);
- struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
- struct edma_tx_desc_ring *etdr;
- u16 from_cpu, dp_bitmap, txq_id;
- int ret, nr_frags = 0, num_tpds_needed = 1, queue_id;
- unsigned int flags_transmit = 0;
- bool packet_is_rstp = false;
- struct netdev_queue *nq = NULL;
-
- if (skb_shinfo(skb)->nr_frags) {
- nr_frags = skb_shinfo(skb)->nr_frags;
- num_tpds_needed += nr_frags;
- } else if (skb_has_frag_list(skb)) {
- struct sk_buff *iter_skb;
-
- skb_walk_frags(skb, iter_skb)
- num_tpds_needed++;
- }
-
- if (num_tpds_needed > EDMA_MAX_SKB_FRAGS) {
- dev_err(&net_dev->dev,
- "skb received with fragments %d which is more than %lu",
- num_tpds_needed, EDMA_MAX_SKB_FRAGS);
- dev_kfree_skb_any(skb);
- adapter->stats.tx_errors++;
- return NETDEV_TX_OK;
- }
-
- if (edma_stp_rstp) {
- u16 ath_hdr, ath_eth_type;
- u8 mac_addr[EDMA_ETH_HDR_LEN];
- ath_eth_type = ntohs(*(uint16_t *)&skb->data[12]);
- if (ath_eth_type == edma_ath_eth_type) {
- packet_is_rstp = true;
- ath_hdr = htons(*(uint16_t *)&skb->data[14]);
- dp_bitmap = ath_hdr & EDMA_TX_ATH_HDR_PORT_BITMAP_MASK;
- from_cpu = (ath_hdr & EDMA_TX_ATH_HDR_FROM_CPU_MASK) >> EDMA_TX_ATH_HDR_FROM_CPU_SHIFT;
- memcpy(mac_addr, skb->data, EDMA_ETH_HDR_LEN);
-
- skb_pull(skb, 4);
-
- memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN);
- }
- }
-
- /* this will be one of the 4 TX queues exposed to linux kernel */
- txq_id = skb_get_queue_mapping(skb);
- queue_id = edma_tx_queue_get(adapter, skb, txq_id);
- etdr = edma_cinfo->tpd_ring[queue_id];
- nq = netdev_get_tx_queue(net_dev, txq_id);
-
- local_bh_disable();
- /* Tx is not handled in bottom half context. Hence, we need to protect
- * Tx from tasks and bottom half
- */
-
- if (num_tpds_needed > edma_tpd_available(edma_cinfo, queue_id)) {
- /* not enough descriptor, just stop queue */
- netif_tx_stop_queue(nq);
- local_bh_enable();
- dev_dbg(&net_dev->dev, "Not enough descriptors available");
- edma_cinfo->edma_ethstats.tx_desc_error++;
- return NETDEV_TX_BUSY;
- }
-
- /* Check and mark VLAN tag offload */
- if (unlikely(skb_vlan_tag_present(skb)))
- flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG;
- else if (!adapter->edma_cinfo->is_single_phy && adapter->default_vlan_tag)
- flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG;
-
- /* Check and mark checksum offload */
- if (likely(skb->ip_summed == CHECKSUM_PARTIAL))
- flags_transmit |= EDMA_HW_CHECKSUM;
-
- /* Map and fill descriptor for Tx */
- ret = edma_tx_map_and_fill(edma_cinfo, adapter, skb, queue_id,
- flags_transmit, from_cpu, dp_bitmap, packet_is_rstp, nr_frags);
- if (ret) {
- dev_kfree_skb_any(skb);
- adapter->stats.tx_errors++;
- goto netdev_okay;
- }
-
- /* Update SW producer index */
- edma_tx_update_hw_idx(edma_cinfo, skb, queue_id);
-
- /* update tx statistics */
- adapter->stats.tx_packets++;
- adapter->stats.tx_bytes += skb->len;
-
-netdev_okay:
- local_bh_enable();
- return NETDEV_TX_OK;
-}
-
-/*
- * edma_flow_may_expire()
- * Timer function called periodically to delete the node
- */
-void edma_flow_may_expire(struct timer_list *t)
-{
- struct edma_rfs_flow_table *table = from_timer(table, t, expire_rfs);
- struct edma_adapter *adapter =
- container_of(table, typeof(*adapter), rfs);
- int j;
-
- spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
- for (j = 0; j < EDMA_RFS_EXPIRE_COUNT_PER_CALL; j++) {
- struct hlist_head *hhead;
- struct hlist_node *tmp;
- struct edma_rfs_filter_node *n;
- bool res;
-
- hhead = &adapter->rfs.hlist_head[adapter->rfs.hashtoclean++];
- hlist_for_each_entry_safe(n, tmp, hhead, node) {
- res = rps_may_expire_flow(adapter->netdev, n->rq_id,
- n->flow_id, n->filter_id);
- if (res) {
- int ret;
- ret = edma_delete_rfs_filter(adapter, n);
- if (ret < 0)
- dev_dbg(&adapter->netdev->dev,
- "RFS entry %d not allowed to be flushed by Switch",
- n->flow_id);
- else {
- hlist_del(&n->node);
- kfree(n);
- adapter->rfs.filter_available++;
- }
- }
- }
- }
-
- adapter->rfs.hashtoclean = adapter->rfs.hashtoclean & (EDMA_RFS_FLOW_ENTRIES - 1);
- spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
- mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4);
-}
-
-/* edma_rx_flow_steer()
- * Called by core to to steer the flow to CPU
- */
-int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb,
- u16 rxq, u32 flow_id)
-{
- struct flow_keys keys;
- struct edma_rfs_filter_node *filter_node;
- struct edma_adapter *adapter = netdev_priv(dev);
- u16 hash_tblid;
- int res;
-
- if (skb->protocol == htons(ETH_P_IPV6)) {
- dev_err(&adapter->pdev->dev, "IPv6 not supported\n");
- res = -EINVAL;
- goto no_protocol_err;
- }
-
- /* Dissect flow parameters
- * We only support IPv4 + TCP/UDP
- */
- res = skb_flow_dissect_flow_keys(skb, &keys, 0);
- if (!((keys.basic.ip_proto == IPPROTO_TCP) || (keys.basic.ip_proto == IPPROTO_UDP))) {
- res = -EPROTONOSUPPORT;
- goto no_protocol_err;
- }
-
- /* Check if table entry exists */
- hash_tblid = skb_get_hash_raw(skb) & EDMA_RFS_FLOW_ENTRIES_MASK;
-
- spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
- filter_node = edma_rfs_key_search(&adapter->rfs.hlist_head[hash_tblid], &keys);
-
- if (filter_node) {
- if (rxq == filter_node->rq_id) {
- res = -EEXIST;
- goto out;
- } else {
- res = edma_delete_rfs_filter(adapter, filter_node);
- if (res < 0)
- dev_warn(&adapter->netdev->dev,
- "Cannot steer flow %d to different queue",
- filter_node->flow_id);
- else {
- adapter->rfs.filter_available++;
- res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node);
- if (res < 0) {
- dev_warn(&adapter->netdev->dev,
- "Cannot steer flow %d to different queue",
- filter_node->flow_id);
- } else {
- adapter->rfs.filter_available--;
- filter_node->rq_id = rxq;
- filter_node->filter_id = res;
- }
- }
- }
- } else {
- if (adapter->rfs.filter_available == 0) {
- res = -EBUSY;
- goto out;
- }
-
- filter_node = kmalloc(sizeof(*filter_node), GFP_ATOMIC);
- if (!filter_node) {
- res = -ENOMEM;
- goto out;
- }
-
- res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node);
- if (res < 0) {
- kfree(filter_node);
- goto out;
- }
-
- adapter->rfs.filter_available--;
- filter_node->rq_id = rxq;
- filter_node->filter_id = res;
- filter_node->flow_id = flow_id;
- filter_node->keys = keys;
- INIT_HLIST_NODE(&filter_node->node);
- hlist_add_head(&filter_node->node, &adapter->rfs.hlist_head[hash_tblid]);
- }
-
-out:
- spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
-no_protocol_err:
- return res;
-}
-
-/* edma_register_rfs_filter()
- * Add RFS filter callback
- */
-int edma_register_rfs_filter(struct net_device *netdev,
- set_rfs_filter_callback_t set_filter)
-{
- struct edma_adapter *adapter = netdev_priv(netdev);
-
- spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
-
- if (adapter->set_rfs_rule) {
- spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
- return -1;
- }
-
- adapter->set_rfs_rule = set_filter;
- spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
-
- return 0;
-}
-
-/* edma_alloc_tx_rings()
- * Allocate rx rings
- */
-int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
- int i, err = 0;
-
- for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
- err = edma_alloc_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]);
- if (err) {
- dev_err(&pdev->dev, "Tx Queue alloc %u failed\n", i);
- return err;
- }
- }
-
- return 0;
-}
-
-/* edma_free_tx_rings()
- * Free tx rings
- */
-void edma_free_tx_rings(struct edma_common_info *edma_cinfo)
-{
- int i;
-
- for (i = 0; i < edma_cinfo->num_tx_queues; i++)
- edma_free_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]);
-}
-
-/* edma_free_tx_resources()
- * Free buffers associated with tx rings
- */
-void edma_free_tx_resources(struct edma_common_info *edma_cinfo)
-{
- struct edma_tx_desc_ring *etdr;
- struct edma_sw_desc *sw_desc;
- struct platform_device *pdev = edma_cinfo->pdev;
- int i, j;
-
- for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
- etdr = edma_cinfo->tpd_ring[i];
- for (j = 0; j < EDMA_TX_RING_SIZE; j++) {
- sw_desc = &etdr->sw_desc[j];
- if (sw_desc->flags & (EDMA_SW_DESC_FLAG_SKB_HEAD |
- EDMA_SW_DESC_FLAG_SKB_FRAG | EDMA_SW_DESC_FLAG_SKB_FRAGLIST))
- edma_tx_unmap_and_free(pdev, sw_desc);
- }
- }
-}
-
-/* edma_alloc_rx_rings()
- * Allocate rx rings
- */
-int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo)
-{
- struct platform_device *pdev = edma_cinfo->pdev;
- int i, j, err = 0;
-
- for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
- err = edma_alloc_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]);
- if (err) {
- dev_err(&pdev->dev, "Rx Queue alloc%u failed\n", i);
- return err;
- }
- j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
- }
-
- return 0;
-}
-
-/* edma_free_rx_rings()
- * free rx rings
- */
-void edma_free_rx_rings(struct edma_common_info *edma_cinfo)
-{
- int i, j;
-
- for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
- edma_free_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]);
- j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
- }
-}
-
-/* edma_free_queues()
- * Free the queues allocaated
- */
-void edma_free_queues(struct edma_common_info *edma_cinfo)
-{
- int i , j;
-
- for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
- if (edma_cinfo->tpd_ring[i])
- kfree(edma_cinfo->tpd_ring[i]);
- edma_cinfo->tpd_ring[i] = NULL;
- }
-
- for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
- if (edma_cinfo->rfd_ring[j])
- kfree(edma_cinfo->rfd_ring[j]);
- edma_cinfo->rfd_ring[j] = NULL;
- j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
- }
-
- edma_cinfo->num_rx_queues = 0;
- edma_cinfo->num_tx_queues = 0;
-
- return;
-}
-
-/* edma_free_rx_resources()
- * Free buffers associated with tx rings
- */
-void edma_free_rx_resources(struct edma_common_info *edma_cinfo)
-{
- struct edma_rfd_desc_ring *erdr;
- struct edma_sw_desc *sw_desc;
- struct platform_device *pdev = edma_cinfo->pdev;
- int i, j, k;
-
- for (i = 0, k = 0; i < edma_cinfo->num_rx_queues; i++) {
- erdr = edma_cinfo->rfd_ring[k];
- for (j = 0; j < EDMA_RX_RING_SIZE; j++) {
- sw_desc = &erdr->sw_desc[j];
- if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD)) {
- dma_unmap_single(&pdev->dev, sw_desc->dma,
- sw_desc->length, DMA_FROM_DEVICE);
- edma_clean_rfd(erdr, j);
- } else if ((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG)) {
- dma_unmap_page(&pdev->dev, sw_desc->dma,
- sw_desc->length, DMA_FROM_DEVICE);
- edma_clean_rfd(erdr, j);
- }
- }
- k += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
-
- }
-}
-
-/* edma_alloc_queues_tx()
- * Allocate memory for all rings
- */
-int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo)
-{
- int i;
-
- for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
- struct edma_tx_desc_ring *etdr;
- etdr = kzalloc(sizeof(struct edma_tx_desc_ring), GFP_KERNEL);
- if (!etdr)
- goto err;
- etdr->count = edma_cinfo->tx_ring_count;
- edma_cinfo->tpd_ring[i] = etdr;
- }
-
- return 0;
-err:
- edma_free_queues(edma_cinfo);
- return -1;
-}
-
-/* edma_alloc_queues_rx()
- * Allocate memory for all rings
- */
-int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo)
-{
- int i, j;
-
- for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
- struct edma_rfd_desc_ring *rfd_ring;
- rfd_ring = kzalloc(sizeof(struct edma_rfd_desc_ring),
- GFP_KERNEL);
- if (!rfd_ring)
- goto err;
- rfd_ring->count = edma_cinfo->rx_ring_count;
- edma_cinfo->rfd_ring[j] = rfd_ring;
- j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
- }
- return 0;
-err:
- edma_free_queues(edma_cinfo);
- return -1;
-}
-
-/* edma_clear_irq_status()
- * Clear interrupt status
- */
-void edma_clear_irq_status()
-{
- edma_write_reg(EDMA_REG_RX_ISR, 0xff);
- edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
- edma_write_reg(EDMA_REG_MISC_ISR, 0x1fff);
- edma_write_reg(EDMA_REG_WOL_ISR, 0x1);
-};
-
-/* edma_configure()
- * Configure skb, edma interrupts and control register.
- */
-int edma_configure(struct edma_common_info *edma_cinfo)
-{
- struct edma_hw *hw = &edma_cinfo->hw;
- u32 intr_modrt_data;
- u32 intr_ctrl_data = 0;
- int i, j, ret_count;
-
- edma_read_reg(EDMA_REG_INTR_CTRL, &intr_ctrl_data);
- intr_ctrl_data &= ~(1 << EDMA_INTR_SW_IDX_W_TYP_SHIFT);
- intr_ctrl_data |= hw->intr_sw_idx_w << EDMA_INTR_SW_IDX_W_TYP_SHIFT;
- edma_write_reg(EDMA_REG_INTR_CTRL, intr_ctrl_data);
-
- edma_clear_irq_status();
-
- /* Clear any WOL status */
- edma_write_reg(EDMA_REG_WOL_CTRL, 0);
- intr_modrt_data = (EDMA_TX_IMT << EDMA_IRQ_MODRT_TX_TIMER_SHIFT);
- intr_modrt_data |= (EDMA_RX_IMT << EDMA_IRQ_MODRT_RX_TIMER_SHIFT);
- edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, intr_modrt_data);
- edma_configure_tx(edma_cinfo);
- edma_configure_rx(edma_cinfo);
-
- /* Allocate the RX buffer */
- for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
- struct edma_rfd_desc_ring *ring = edma_cinfo->rfd_ring[j];
- ret_count = edma_alloc_rx_buf(edma_cinfo, ring, ring->count, j);
- if (ret_count) {
- dev_dbg(&edma_cinfo->pdev->dev, "not all rx buffers allocated\n");
- }
- j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
- }
-
- /* Configure descriptor Ring */
- edma_init_desc(edma_cinfo);
- return 0;
-}
-
-/* edma_irq_enable()
- * Enable default interrupt generation settings
- */
-void edma_irq_enable(struct edma_common_info *edma_cinfo)
-{
- struct edma_hw *hw = &edma_cinfo->hw;
- int i, j;
-
- edma_write_reg(EDMA_REG_RX_ISR, 0xff);
- for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
- edma_write_reg(EDMA_REG_RX_INT_MASK_Q(j), hw->rx_intr_mask);
- j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
- }
- edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
- for (i = 0; i < edma_cinfo->num_tx_queues; i++)
- edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), hw->tx_intr_mask);
-}
-
-/* edma_irq_disable()
- * Disable Interrupt
- */
-void edma_irq_disable(struct edma_common_info *edma_cinfo)
-{
- int i;
-
- for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++)
- edma_write_reg(EDMA_REG_RX_INT_MASK_Q(i), 0x0);
-
- for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++)
- edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), 0x0);
- edma_write_reg(EDMA_REG_MISC_IMR, 0);
- edma_write_reg(EDMA_REG_WOL_IMR, 0);
-}
-
-/* edma_free_irqs()
- * Free All IRQs
- */
-void edma_free_irqs(struct edma_adapter *adapter)
-{
- struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
- int i, j;
- int k = ((edma_cinfo->num_rx_queues == 4) ? 1 : 2);
-
- for (i = 0; i < CONFIG_NR_CPUS; i++) {
- for (j = edma_cinfo->edma_percpu_info[i].tx_start; j < (edma_cinfo->edma_percpu_info[i].tx_start + 4); j++)
- free_irq(edma_cinfo->tx_irq[j], &edma_cinfo->edma_percpu_info[i]);
-
- for (j = edma_cinfo->edma_percpu_info[i].rx_start; j < (edma_cinfo->edma_percpu_info[i].rx_start + k); j++)
- free_irq(edma_cinfo->rx_irq[j], &edma_cinfo->edma_percpu_info[i]);
- }
-}
-
-/* edma_enable_rx_ctrl()
- * Enable RX queue control
- */
-void edma_enable_rx_ctrl(struct edma_hw *hw)
-{
- u32 data;
-
- edma_read_reg(EDMA_REG_RXQ_CTRL, &data);
- data |= EDMA_RXQ_CTRL_EN;
- edma_write_reg(EDMA_REG_RXQ_CTRL, data);
-}
-
-
-/* edma_enable_tx_ctrl()
- * Enable TX queue control
- */
-void edma_enable_tx_ctrl(struct edma_hw *hw)
-{
- u32 data;
-
- edma_read_reg(EDMA_REG_TXQ_CTRL, &data);
- data |= EDMA_TXQ_CTRL_TXQ_EN;
- edma_write_reg(EDMA_REG_TXQ_CTRL, data);
-}
-
-/* edma_stop_rx_tx()
- * Disable RX/TQ Queue control
- */
-void edma_stop_rx_tx(struct edma_hw *hw)
-{
- u32 data;
-
- edma_read_reg(EDMA_REG_RXQ_CTRL, &data);
- data &= ~EDMA_RXQ_CTRL_EN;
- edma_write_reg(EDMA_REG_RXQ_CTRL, data);
- edma_read_reg(EDMA_REG_TXQ_CTRL, &data);
- data &= ~EDMA_TXQ_CTRL_TXQ_EN;
- edma_write_reg(EDMA_REG_TXQ_CTRL, data);
-}
-
-/* edma_reset()
- * Reset the EDMA
- */
-int edma_reset(struct edma_common_info *edma_cinfo)
-{
- struct edma_hw *hw = &edma_cinfo->hw;
-
- edma_irq_disable(edma_cinfo);
-
- edma_clear_irq_status();
-
- edma_stop_rx_tx(hw);
-
- return 0;
-}
-
-/* edma_fill_netdev()
- * Fill netdev for each etdr
- */
-int edma_fill_netdev(struct edma_common_info *edma_cinfo, int queue_id,
- int dev, int txq_id)
-{
- struct edma_tx_desc_ring *etdr;
- int i = 0;
-
- etdr = edma_cinfo->tpd_ring[queue_id];
-
- while (etdr->netdev[i])
- i++;
-
- if (i >= EDMA_MAX_NETDEV_PER_QUEUE)
- return -1;
-
- /* Populate the netdev associated with the tpd ring */
- etdr->netdev[i] = edma_netdev[dev];
- etdr->nq[i] = netdev_get_tx_queue(edma_netdev[dev], txq_id);
-
- return 0;
-}
-
-/* edma_set_mac()
- * Change the Ethernet Address of the NIC
- */
-int edma_set_mac_addr(struct net_device *netdev, void *p)
-{
- struct sockaddr *addr = p;
-
- if (!is_valid_ether_addr(addr->sa_data))
- return -EINVAL;
-
- if (netif_running(netdev))
- return -EBUSY;
-
- memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
- return 0;
-}
-
-/* edma_set_stp_rstp()
- * set stp/rstp
- */
-void edma_set_stp_rstp(bool rstp)
-{
- edma_stp_rstp = rstp;
-}
-
-/* edma_assign_ath_hdr_type()
- * assign atheros header eth type
- */
-void edma_assign_ath_hdr_type(int eth_type)
-{
- edma_ath_eth_type = eth_type & EDMA_ETH_TYPE_MASK;
-}
-
-/* edma_get_default_vlan_tag()
- * Used by other modules to get the default vlan tag
- */
-int edma_get_default_vlan_tag(struct net_device *netdev)
-{
- struct edma_adapter *adapter = netdev_priv(netdev);
-
- if (adapter->default_vlan_tag)
- return adapter->default_vlan_tag;
-
- return 0;
-}
-
-/* edma_open()
- * gets called when netdevice is up, start the queue.
- */
-int edma_open(struct net_device *netdev)
-{
- struct edma_adapter *adapter = netdev_priv(netdev);
- struct platform_device *pdev = adapter->edma_cinfo->pdev;
-
- netif_tx_start_all_queues(netdev);
- edma_initialise_rfs_flow_table(adapter);
- set_bit(__EDMA_UP, &adapter->state_flags);
-
- /* if Link polling is enabled, in our case enabled for WAN, then
- * do a phy start, else always set link as UP
- */
- if (adapter->poll_required) {
- if (!IS_ERR(adapter->phydev)) {
- /* AR40xx calibration will leave the PHY in unwanted state,
- * so a soft reset is required before phy_start()
- */
- genphy_soft_reset(adapter->phydev);
- phy_start(adapter->phydev);
- phy_start_aneg(adapter->phydev);
- adapter->link_state = __EDMA_LINKDOWN;
- } else {
- dev_dbg(&pdev->dev, "Invalid PHY device for a link polled interface\n");
- }
- } else {
- adapter->link_state = __EDMA_LINKUP;
- netif_carrier_on(netdev);
- }
-
- return 0;
-}
-
-
-/* edma_close()
- * gets called when netdevice is down, stops the queue.
- */
-int edma_close(struct net_device *netdev)
-{
- struct edma_adapter *adapter = netdev_priv(netdev);
-
- edma_free_rfs_flow_table(adapter);
- netif_carrier_off(netdev);
- netif_tx_stop_all_queues(netdev);
-
- if (adapter->poll_required) {
- if (!IS_ERR(adapter->phydev))
- phy_stop(adapter->phydev);
- }
-
- adapter->link_state = __EDMA_LINKDOWN;
-
- /* Set GMAC state to UP before link state is checked
- */
- clear_bit(__EDMA_UP, &adapter->state_flags);
-
- return 0;
-}
-
-/* edma_poll
- * polling function that gets called when the napi gets scheduled.
- *
- * Main sequence of task performed in this api
- * is clear irq status -> clear_tx_irq -> clean_rx_irq->
- * enable interrupts.
- */
-int edma_poll(struct napi_struct *napi, int budget)
-{
- struct edma_per_cpu_queues_info *edma_percpu_info = container_of(napi,
- struct edma_per_cpu_queues_info, napi);
- struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo;
- u32 reg_data;
- u32 shadow_rx_status, shadow_tx_status;
- int queue_id;
- int i, work_done = 0;
- u16 rx_pending_fill;
-
- /* Store the Rx/Tx status by ANDing it with
- * appropriate CPU RX?TX mask
- */
- edma_read_reg(EDMA_REG_RX_ISR, ®_data);
- edma_percpu_info->rx_status |= reg_data & edma_percpu_info->rx_mask;
- shadow_rx_status = edma_percpu_info->rx_status;
- edma_read_reg(EDMA_REG_TX_ISR, ®_data);
- edma_percpu_info->tx_status |= reg_data & edma_percpu_info->tx_mask;
- shadow_tx_status = edma_percpu_info->tx_status;
-
- /* Every core will have a start, which will be computed
- * in probe and stored in edma_percpu_info->tx_start variable.
- * We will shift the status bit by tx_start to obtain
- * status bits for the core on which the current processing
- * is happening. Since, there are 4 tx queues per core,
- * we will run the loop till we get the correct queue to clear.
- */
- while (edma_percpu_info->tx_status) {
- queue_id = ffs(edma_percpu_info->tx_status) - 1;
- edma_tx_complete(edma_cinfo, queue_id);
- edma_percpu_info->tx_status &= ~(1 << queue_id);
- }
-
- /* Every core will have a start, which will be computed
- * in probe and stored in edma_percpu_info->tx_start variable.
- * We will shift the status bit by tx_start to obtain
- * status bits for the core on which the current processing
- * is happening. Since, there are 4 tx queues per core, we
- * will run the loop till we get the correct queue to clear.
- */
- while (edma_percpu_info->rx_status) {
- queue_id = ffs(edma_percpu_info->rx_status) - 1;
- rx_pending_fill = edma_rx_complete(edma_cinfo, &work_done,
- budget, queue_id, napi);
-
- if (likely(work_done < budget)) {
- if (rx_pending_fill) {
- /* reschedule poll() to refill rx buffer deficit */
- work_done = budget;
- break;
- }
- edma_percpu_info->rx_status &= ~(1 << queue_id);
- } else {
- break;
- }
- }
-
- /* Clear the status register, to avoid the interrupts to
- * reoccur.This clearing of interrupt status register is
- * done here as writing to status register only takes place
- * once the producer/consumer index has been updated to
- * reflect that the packet transmission/reception went fine.
- */
- edma_write_reg(EDMA_REG_RX_ISR, shadow_rx_status);
- edma_write_reg(EDMA_REG_TX_ISR, shadow_tx_status);
-
- /* If budget not fully consumed, exit the polling mode */
- if (likely(work_done < budget)) {
- napi_complete(napi);
-
- /* re-enable the interrupts */
- for (i = 0; i < edma_cinfo->num_rxq_per_core; i++)
- edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x1);
- for (i = 0; i < edma_cinfo->num_txq_per_core; i++)
- edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x1);
- }
-
- return work_done;
-}
-
-/* edma interrupt()
- * interrupt handler
- */
-irqreturn_t edma_interrupt(int irq, void *dev)
-{
- struct edma_per_cpu_queues_info *edma_percpu_info = (struct edma_per_cpu_queues_info *) dev;
- struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo;
- int i;
-
- /* Unmask the TX/RX interrupt register */
- for (i = 0; i < edma_cinfo->num_rxq_per_core; i++)
- edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x0);
-
- for (i = 0; i < edma_cinfo->num_txq_per_core; i++)
- edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x0);
-
- napi_schedule(&edma_percpu_info->napi);
-
- return IRQ_HANDLED;
-}
diff --git a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma.h b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma.h
deleted file mode 100644
index 015e5f5026..0000000000
--- a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma.h
+++ /dev/null
@@ -1,455 +0,0 @@
-/*
- * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for
- * any purpose with or without fee is hereby granted, provided that the
- * above copyright notice and this permission notice appear in all copies.
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
- * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _EDMA_H_
-#define _EDMA_H_
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/io.h>
-#include <linux/vmalloc.h>
-#include <linux/pagemap.h>
-#include <linux/smp.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/clk.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/sysctl.h>
-#include <linux/phy.h>
-#include <linux/of_net.h>
-#include <net/checksum.h>
-#include <net/ip6_checksum.h>
-#include <asm-generic/bug.h>
-#include "ess_edma.h"
-
-#define EDMA_CPU_CORES_SUPPORTED 4
-#define EDMA_MAX_PORTID_SUPPORTED 5
-#define EDMA_MAX_VLAN_SUPPORTED EDMA_MAX_PORTID_SUPPORTED
-#define EDMA_MAX_PORTID_BITMAP_INDEX (EDMA_MAX_PORTID_SUPPORTED + 1)
-#define EDMA_MAX_PORTID_BITMAP_SUPPORTED 0x1f /* 0001_1111 = 0x1f */
-#define EDMA_MAX_NETDEV_PER_QUEUE 4 /* 3 Netdev per queue, 1 space for indexing */
-
-#define EDMA_MAX_RECEIVE_QUEUE 8
-#define EDMA_MAX_TRANSMIT_QUEUE 16
-
-/* WAN/LAN adapter number */
-#define EDMA_WAN 0
-#define EDMA_LAN 1
-
-/* VLAN tag */
-#define EDMA_LAN_DEFAULT_VLAN 1
-#define EDMA_WAN_DEFAULT_VLAN 2
-
-#define EDMA_DEFAULT_GROUP1_VLAN 1
-#define EDMA_DEFAULT_GROUP2_VLAN 2
-#define EDMA_DEFAULT_GROUP3_VLAN 3
-#define EDMA_DEFAULT_GROUP4_VLAN 4
-#define EDMA_DEFAULT_GROUP5_VLAN 5
-
-/* Queues exposed to linux kernel */
-#define EDMA_NETDEV_TX_QUEUE 4
-#define EDMA_NETDEV_RX_QUEUE 4
-
-/* Number of queues per core */
-#define EDMA_NUM_TXQ_PER_CORE 4
-#define EDMA_NUM_RXQ_PER_CORE 2
-
-#define EDMA_TPD_EOP_SHIFT 31
-
-#define EDMA_PORT_ID_SHIFT 12
-#define EDMA_PORT_ID_MASK 0x7
-
-/* tpd word 3 bit 18-28 */
-#define EDMA_TPD_PORT_BITMAP_SHIFT 18
-
-#define EDMA_TPD_FROM_CPU_SHIFT 25
-
-#define EDMA_FROM_CPU_MASK 0x80
-#define EDMA_SKB_PRIORITY_MASK 0x38
-
-/* TX/RX descriptor ring count */
-/* should be a power of 2 */
-#define EDMA_RX_RING_SIZE 128
-#define EDMA_TX_RING_SIZE 128
-
-/* Flags used in paged/non paged mode */
-#define EDMA_RX_HEAD_BUFF_SIZE_JUMBO 256
-#define EDMA_RX_HEAD_BUFF_SIZE 1540
-
-/* MAX frame size supported by switch */
-#define EDMA_MAX_JUMBO_FRAME_SIZE 9216
-
-/* Configurations */
-#define EDMA_INTR_CLEAR_TYPE 0
-#define EDMA_INTR_SW_IDX_W_TYPE 0
-#define EDMA_FIFO_THRESH_TYPE 0
-#define EDMA_RSS_TYPE 0
-#define EDMA_RX_IMT 0x0020
-#define EDMA_TX_IMT 0x0050
-#define EDMA_TPD_BURST 5
-#define EDMA_TXF_BURST 0x100
-#define EDMA_RFD_BURST 8
-#define EDMA_RFD_THR 16
-#define EDMA_RFD_LTHR 0
-
-/* RX/TX per CPU based mask/shift */
-#define EDMA_TX_PER_CPU_MASK 0xF
-#define EDMA_RX_PER_CPU_MASK 0x3
-#define EDMA_TX_PER_CPU_MASK_SHIFT 0x2
-#define EDMA_RX_PER_CPU_MASK_SHIFT 0x1
-#define EDMA_TX_CPU_START_SHIFT 0x2
-#define EDMA_RX_CPU_START_SHIFT 0x1
-
-/* FLags used in transmit direction */
-#define EDMA_HW_CHECKSUM 0x00000001
-#define EDMA_VLAN_TX_TAG_INSERT_FLAG 0x00000002
-#define EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG 0x00000004
-
-#define EDMA_SW_DESC_FLAG_LAST 0x1
-#define EDMA_SW_DESC_FLAG_SKB_HEAD 0x2
-#define EDMA_SW_DESC_FLAG_SKB_FRAG 0x4
-#define EDMA_SW_DESC_FLAG_SKB_FRAGLIST 0x8
-#define EDMA_SW_DESC_FLAG_SKB_NONE 0x10
-#define EDMA_SW_DESC_FLAG_SKB_REUSE 0x20
-
-
-#define EDMA_MAX_SKB_FRAGS (MAX_SKB_FRAGS + 1)
-
-/* Ethtool specific list of EDMA supported features */
-#define EDMA_SUPPORTED_FEATURES (SUPPORTED_10baseT_Half \
- | SUPPORTED_10baseT_Full \
- | SUPPORTED_100baseT_Half \
- | SUPPORTED_100baseT_Full \
- | SUPPORTED_1000baseT_Full)
-
-/* Recevie side atheros Header */
-#define EDMA_RX_ATH_HDR_VERSION 0x2
-#define EDMA_RX_ATH_HDR_VERSION_SHIFT 14
-#define EDMA_RX_ATH_HDR_PRIORITY_SHIFT 11
-#define EDMA_RX_ATH_PORT_TYPE_SHIFT 6
-#define EDMA_RX_ATH_HDR_RSTP_PORT_TYPE 0x4
-
-/* Transmit side atheros Header */
-#define EDMA_TX_ATH_HDR_PORT_BITMAP_MASK 0x7F
-#define EDMA_TX_ATH_HDR_FROM_CPU_MASK 0x80
-#define EDMA_TX_ATH_HDR_FROM_CPU_SHIFT 7
-
-#define EDMA_TXQ_START_CORE0 8
-#define EDMA_TXQ_START_CORE1 12
-#define EDMA_TXQ_START_CORE2 0
-#define EDMA_TXQ_START_CORE3 4
-
-#define EDMA_TXQ_IRQ_MASK_CORE0 0x0F00
-#define EDMA_TXQ_IRQ_MASK_CORE1 0xF000
-#define EDMA_TXQ_IRQ_MASK_CORE2 0x000F
-#define EDMA_TXQ_IRQ_MASK_CORE3 0x00F0
-
-#define EDMA_ETH_HDR_LEN 12
-#define EDMA_ETH_TYPE_MASK 0xFFFF
-
-#define EDMA_RX_BUFFER_WRITE 16
-#define EDMA_RFD_AVAIL_THR 80
-
-#define EDMA_GMAC_NO_MDIO_PHY PHY_MAX_ADDR
-
-extern int ssdk_rfs_ipct_rule_set(__be32 ip_src, __be32 ip_dst,
- __be16 sport, __be16 dport,
- uint8_t proto, u16 loadbalance, bool action);
-struct edma_ethtool_statistics {
- u32 tx_q0_pkt;
- u32 tx_q1_pkt;
- u32 tx_q2_pkt;
- u32 tx_q3_pkt;
- u32 tx_q4_pkt;
- u32 tx_q5_pkt;
- u32 tx_q6_pkt;
- u32 tx_q7_pkt;
- u32 tx_q8_pkt;
- u32 tx_q9_pkt;
- u32 tx_q10_pkt;
- u32 tx_q11_pkt;
- u32 tx_q12_pkt;
- u32 tx_q13_pkt;
- u32 tx_q14_pkt;
- u32 tx_q15_pkt;
- u32 tx_q0_byte;
- u32 tx_q1_byte;
- u32 tx_q2_byte;
- u32 tx_q3_byte;
- u32 tx_q4_byte;
- u32 tx_q5_byte;
- u32 tx_q6_byte;
- u32 tx_q7_byte;
- u32 tx_q8_byte;
- u32 tx_q9_byte;
- u32 tx_q10_byte;
- u32 tx_q11_byte;
- u32 tx_q12_byte;
- u32 tx_q13_byte;
- u32 tx_q14_byte;
- u32 tx_q15_byte;
- u32 rx_q0_pkt;
- u32 rx_q1_pkt;
- u32 rx_q2_pkt;
- u32 rx_q3_pkt;
- u32 rx_q4_pkt;
- u32 rx_q5_pkt;
- u32 rx_q6_pkt;
- u32 rx_q7_pkt;
- u32 rx_q0_byte;
- u32 rx_q1_byte;
- u32 rx_q2_byte;
- u32 rx_q3_byte;
- u32 rx_q4_byte;
- u32 rx_q5_byte;
- u32 rx_q6_byte;
- u32 rx_q7_byte;
- u32 tx_desc_error;
- u32 rx_alloc_fail_ctr;
-};
-
-struct edma_mdio_data {
- struct mii_bus *mii_bus;
- void __iomem *membase;
- int phy_irq[PHY_MAX_ADDR];
-};
-
-/* EDMA LINK state */
-enum edma_link_state {
- __EDMA_LINKUP, /* Indicate link is UP */
- __EDMA_LINKDOWN /* Indicate link is down */
-};
-
-/* EDMA GMAC state */
-enum edma_gmac_state {
- __EDMA_UP /* use to indicate GMAC is up */
-};
-
-/* edma transmit descriptor */
-struct edma_tx_desc {
- __le16 len; /* full packet including CRC */
- __le16 svlan_tag; /* vlan tag */
- __le32 word1; /* byte 4-7 */
- __le32 addr; /* address of buffer */
- __le32 word3; /* byte 12 */
-};
-
-/* edma receive return descriptor */
-struct edma_rx_return_desc {
- u16 rrd0;
- u16 rrd1;
- u16 rrd2;
- u16 rrd3;
- u16 rrd4;
- u16 rrd5;
- u16 rrd6;
- u16 rrd7;
-};
-
-/* RFD descriptor */
-struct edma_rx_free_desc {
- __le32 buffer_addr; /* buffer address */
-};
-
-/* edma hw specific data */
-struct edma_hw {
- u32 __iomem *hw_addr; /* inner register address */
- struct edma_adapter *adapter; /* netdevice adapter */
- u32 rx_intr_mask; /*rx interrupt mask */
- u32 tx_intr_mask; /* tx interrupt nask */
- u32 misc_intr_mask; /* misc interrupt mask */
- u32 wol_intr_mask; /* wake on lan interrupt mask */
- bool intr_clear_type; /* interrupt clear */
- bool intr_sw_idx_w; /* interrupt software index */
- u32 rx_head_buff_size; /* Rx buffer size */
- u8 rss_type; /* rss protocol type */
-};
-
-/* edma_sw_desc stores software descriptor
- * SW descriptor has 1:1 map with HW descriptor
- */
-struct edma_sw_desc {
- struct sk_buff *skb;
- dma_addr_t dma; /* dma address */
- u16 length; /* Tx/Rx buffer length */
- u32 flags;
-};
-
-/* per core related information */
-struct edma_per_cpu_queues_info {
- struct napi_struct napi; /* napi associated with the core */
- u32 tx_mask; /* tx interrupt mask */
- u32 rx_mask; /* rx interrupt mask */
- u32 tx_status; /* tx interrupt status */
- u32 rx_status; /* rx interrupt status */
- u32 tx_start; /* tx queue start */
- u32 rx_start; /* rx queue start */
- struct edma_common_info *edma_cinfo; /* edma common info */
-};
-
-/* edma specific common info */
-struct edma_common_info {
- struct edma_tx_desc_ring *tpd_ring[16]; /* 16 Tx queues */
- struct edma_rfd_desc_ring *rfd_ring[8]; /* 8 Rx queues */
- struct platform_device *pdev; /* device structure */
- struct net_device *netdev[EDMA_MAX_PORTID_SUPPORTED];
- struct net_device *portid_netdev_lookup_tbl[EDMA_MAX_PORTID_BITMAP_INDEX];
- struct ctl_table_header *edma_ctl_table_hdr;
- int num_gmac;
- struct edma_ethtool_statistics edma_ethstats; /* ethtool stats */
- int num_rx_queues; /* number of rx queue */
- u32 num_tx_queues; /* number of tx queue */
- u32 tx_irq[16]; /* number of tx irq */
- u32 rx_irq[8]; /* number of rx irq */
- u32 from_cpu; /* from CPU TPD field */
- u32 num_rxq_per_core; /* Rx queues per core */
- u32 num_txq_per_core; /* Tx queues per core */
- u16 tx_ring_count; /* Tx ring count */
- u16 rx_ring_count; /* Rx ring*/
- u16 rx_head_buffer_len; /* rx buffer length */
- u16 rx_page_buffer_len; /* rx buffer length */
- u32 page_mode; /* Jumbo frame supported flag */
- u32 fraglist_mode; /* fraglist supported flag */
- struct edma_hw hw; /* edma hw specific structure */
- struct edma_per_cpu_queues_info edma_percpu_info[CONFIG_NR_CPUS]; /* per cpu information */
- spinlock_t stats_lock; /* protect edma stats area for updation */
- struct timer_list edma_stats_timer;
- bool is_single_phy;
- void __iomem *ess_hw_addr;
- struct clk *ess_clk;
-};
-
-/* transimit packet descriptor (tpd) ring */
-struct edma_tx_desc_ring {
- struct netdev_queue *nq[EDMA_MAX_NETDEV_PER_QUEUE]; /* Linux queue index */
- struct net_device *netdev[EDMA_MAX_NETDEV_PER_QUEUE];
- /* Array of netdevs associated with the tpd ring */
- void *hw_desc; /* descriptor ring virtual address */
- struct edma_sw_desc *sw_desc; /* buffer associated with ring */
- int netdev_bmp; /* Bitmap for per-ring netdevs */
- u32 size; /* descriptor ring length in bytes */
- u16 count; /* number of descriptors in the ring */
- dma_addr_t dma; /* descriptor ring physical address */
- u16 sw_next_to_fill; /* next Tx descriptor to fill */
- u16 sw_next_to_clean; /* next Tx descriptor to clean */
-};
-
-/* receive free descriptor (rfd) ring */
-struct edma_rfd_desc_ring {
- void *hw_desc; /* descriptor ring virtual address */
- struct edma_sw_desc *sw_desc; /* buffer associated with ring */
- u16 size; /* bytes allocated to sw_desc */
- u16 count; /* number of descriptors in the ring */
- dma_addr_t dma; /* descriptor ring physical address */
- u16 sw_next_to_fill; /* next descriptor to fill */
- u16 sw_next_to_clean; /* next descriptor to clean */
- u16 pending_fill; /* fill pending from previous iteration */
-};
-
-/* edma_rfs_flter_node - rfs filter node in hash table */
-struct edma_rfs_filter_node {
- struct flow_keys keys;
- u32 flow_id; /* flow_id of filter provided by kernel */
- u16 filter_id; /* filter id of filter returned by adaptor */
- u16 rq_id; /* desired rq index */
- struct hlist_node node; /* edma rfs list node */
-};
-
-/* edma_rfs_flow_tbl - rfs flow table */
-struct edma_rfs_flow_table {
- u16 max_num_filter; /* Maximum number of filters edma supports */
- u16 hashtoclean; /* hash table index to clean next */
- int filter_available; /* Number of free filters available */
- struct hlist_head hlist_head[EDMA_RFS_FLOW_ENTRIES];
- spinlock_t rfs_ftab_lock;
- struct timer_list expire_rfs; /* timer function for edma_rps_may_expire_flow */
-};
-
-/* EDMA net device structure */
-struct edma_adapter {
- struct net_device *netdev; /* netdevice */
- struct platform_device *pdev; /* platform device */
- struct edma_common_info *edma_cinfo; /* edma common info */
- struct phy_device *phydev; /* Phy device */
- struct edma_rfs_flow_table rfs; /* edma rfs flow table */
- struct net_device_stats stats; /* netdev statistics */
- set_rfs_filter_callback_t set_rfs_rule;
- u32 flags;/* status flags */
- unsigned long state_flags; /* GMAC up/down flags */
- u32 forced_speed; /* link force speed */
- u32 forced_duplex; /* link force duplex */
- u32 link_state; /* phy link state */
- u32 phy_mdio_addr; /* PHY device address on MII interface */
- u32 poll_required; /* check if link polling is required */
- u32 tx_start_offset[CONFIG_NR_CPUS]; /* tx queue start */
- u32 default_vlan_tag; /* vlan tag */
- u32 dp_bitmap;
- uint8_t phy_id[MII_BUS_ID_SIZE + 3];
-};
-
-int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo);
-int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo);
-int edma_open(struct net_device *netdev);
-int edma_close(struct net_device *netdev);
-void edma_free_tx_resources(struct edma_common_info *edma_c_info);
-void edma_free_rx_resources(struct edma_common_info *edma_c_info);
-int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo);
-int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo);
-void edma_free_tx_rings(struct edma_common_info *edma_cinfo);
-void edma_free_rx_rings(struct edma_common_info *edma_cinfo);
-void edma_free_queues(struct edma_common_info *edma_cinfo);
-void edma_irq_disable(struct edma_common_info *edma_cinfo);
-int edma_reset(struct edma_common_info *edma_cinfo);
-int edma_poll(struct napi_struct *napi, int budget);
-netdev_tx_t edma_xmit(struct sk_buff *skb,
- struct net_device *netdev);
-int edma_configure(struct edma_common_info *edma_cinfo);
-void edma_irq_enable(struct edma_common_info *edma_cinfo);
-void edma_enable_tx_ctrl(struct edma_hw *hw);
-void edma_enable_rx_ctrl(struct edma_hw *hw);
-void edma_stop_rx_tx(struct edma_hw *hw);
-void edma_free_irqs(struct edma_adapter *adapter);
-irqreturn_t edma_interrupt(int irq, void *dev);
-void edma_write_reg(u16 reg_addr, u32 reg_value);
-void edma_read_reg(u16 reg_addr, volatile u32 *reg_value);
-struct net_device_stats *edma_get_stats(struct net_device *netdev);
-int edma_set_mac_addr(struct net_device *netdev, void *p);
-int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb,
- u16 rxq, u32 flow_id);
-int edma_register_rfs_filter(struct net_device *netdev,
- set_rfs_filter_callback_t set_filter);
-void edma_flow_may_expire(struct timer_list *t);
-void edma_set_ethtool_ops(struct net_device *netdev);
-void edma_set_stp_rstp(bool tag);
-void edma_assign_ath_hdr_type(int tag);
-int edma_get_default_vlan_tag(struct net_device *netdev);
-void edma_adjust_link(struct net_device *netdev);
-int edma_fill_netdev(struct edma_common_info *edma_cinfo, int qid, int num, int txq_id);
-void edma_read_append_stats(struct edma_common_info *edma_cinfo);
-void edma_change_tx_coalesce(int usecs);
-void edma_change_rx_coalesce(int usecs);
-void edma_get_tx_rx_coalesce(u32 *reg_val);
-void edma_clear_irq_status(void);
-void ess_set_port_status_speed(struct edma_common_info *edma_cinfo,
- struct phy_device *phydev, uint8_t port_id);
-#endif /* _EDMA_H_ */
diff --git a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_axi.c b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
deleted file mode 100644
index e6739261c3..0000000000
--- a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
+++ /dev/null
@@ -1,1346 +0,0 @@
-/*
- * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for
- * any purpose with or without fee is hereby granted, provided that the
- * above copyright notice and this permission notice appear in all copies.
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
- * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/cpu_rmap.h>
-#include <linux/of.h>
-#include <linux/of_net.h>
-#include <linux/timer.h>
-#include <linux/of_platform.h>
-#include <linux/of_address.h>
-#include <linux/of_mdio.h>
-#include <linux/clk.h>
-#include <linux/string.h>
-#include <linux/reset.h>
-#include <linux/version.h>
-#include "edma.h"
-#include "ess_edma.h"
-
-/* Weight round robin and virtual QID mask */
-#define EDMA_WRR_VID_SCTL_MASK 0xffff
-
-/* Weight round robin and virtual QID shift */
-#define EDMA_WRR_VID_SCTL_SHIFT 16
-
-char edma_axi_driver_name[] = "ess_edma";
-static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
- NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;
-
-static u32 edma_hw_addr;
-
-char edma_tx_irq[16][64];
-char edma_rx_irq[8][64];
-struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED];
-static u16 tx_start[4] = {EDMA_TXQ_START_CORE0, EDMA_TXQ_START_CORE1,
- EDMA_TXQ_START_CORE2, EDMA_TXQ_START_CORE3};
-static u32 tx_mask[4] = {EDMA_TXQ_IRQ_MASK_CORE0, EDMA_TXQ_IRQ_MASK_CORE1,
- EDMA_TXQ_IRQ_MASK_CORE2, EDMA_TXQ_IRQ_MASK_CORE3};
-
-static u32 edma_default_ltag __read_mostly = EDMA_LAN_DEFAULT_VLAN;
-static u32 edma_default_wtag __read_mostly = EDMA_WAN_DEFAULT_VLAN;
-static u32 edma_default_group1_vtag __read_mostly = EDMA_DEFAULT_GROUP1_VLAN;
-static u32 edma_default_group2_vtag __read_mostly = EDMA_DEFAULT_GROUP2_VLAN;
-static u32 edma_default_group3_vtag __read_mostly = EDMA_DEFAULT_GROUP3_VLAN;
-static u32 edma_default_group4_vtag __read_mostly = EDMA_DEFAULT_GROUP4_VLAN;
-static u32 edma_default_group5_vtag __read_mostly = EDMA_DEFAULT_GROUP5_VLAN;
-static u32 edma_rss_idt_val = EDMA_RSS_IDT_VALUE;
-static u32 edma_rss_idt_idx;
-
-static int edma_weight_assigned_to_q __read_mostly;
-static int edma_queue_to_virtual_q __read_mostly;
-static bool edma_enable_rstp __read_mostly;
-static int edma_athr_hdr_eth_type __read_mostly;
-
-static int page_mode;
-module_param(page_mode, int, 0);
-MODULE_PARM_DESC(page_mode, "enable page mode");
-
-static int overwrite_mode;
-module_param(overwrite_mode, int, 0);
-MODULE_PARM_DESC(overwrite_mode, "overwrite default page_mode setting");
-
-static int jumbo_mru = EDMA_RX_HEAD_BUFF_SIZE;
-module_param(jumbo_mru, int, 0);
-MODULE_PARM_DESC(jumbo_mru, "enable fraglist support");
-
-static int num_rxq = 4;
-module_param(num_rxq, int, 0);
-MODULE_PARM_DESC(num_rxq, "change the number of rx queues");
-
-void edma_write_reg(u16 reg_addr, u32 reg_value)
-{
- writel(reg_value, ((void __iomem *)(edma_hw_addr + reg_addr)));
-}
-
-void edma_read_reg(u16 reg_addr, volatile u32 *reg_value)
-{
- *reg_value = readl((void __iomem *)(edma_hw_addr + reg_addr));
-}
-
-static void ess_write_reg(struct edma_common_info *edma, u16 reg_addr, u32 reg_value)
-{
- writel(reg_value, ((void __iomem *)
- ((unsigned long)edma->ess_hw_addr + reg_addr)));
-}
-
-static void ess_read_reg(struct edma_common_info *edma, u16 reg_addr,
- volatile u32 *reg_value)
-{
- *reg_value = readl((void __iomem *)
- ((unsigned long)edma->ess_hw_addr + reg_addr));
-}
-
-static int ess_reset(struct edma_common_info *edma)
-{
- struct device_node *switch_node = NULL;
- struct reset_control *ess_rst;
- u32 regval;
-
- switch_node = of_find_node_by_name(NULL, "ess-switch");
- if (!switch_node) {
- pr_err("switch-node not found\n");
- return -EINVAL;
- }
-
- ess_rst = of_reset_control_get(switch_node, "ess_rst");
- of_node_put(switch_node);
-
- if (IS_ERR(ess_rst)) {
- pr_err("failed to find ess_rst!\n");
- return -ENOENT;
- }
-
- reset_control_assert(ess_rst);
- msleep(10);
- reset_control_deassert(ess_rst);
- msleep(100);
- reset_control_put(ess_rst);
-
- /* Enable only port 5 <--> port 0
- * bits 0:6 bitmap of ports it can fwd to */
-#define SET_PORT_BMP(r,v) \
- ess_read_reg(edma, r, ®val); \
- ess_write_reg(edma, r, ((regval & ~0x3F) | v));
-
- SET_PORT_BMP(ESS_PORT0_LOOKUP_CTRL,0x20);
- SET_PORT_BMP(ESS_PORT1_LOOKUP_CTRL,0x00);
- SET_PORT_BMP(ESS_PORT2_LOOKUP_CTRL,0x00);
- SET_PORT_BMP(ESS_PORT3_LOOKUP_CTRL,0x00);
- SET_PORT_BMP(ESS_PORT4_LOOKUP_CTRL,0x00);
- SET_PORT_BMP(ESS_PORT5_LOOKUP_CTRL,0x01);
- ess_write_reg(edma, ESS_RGMII_CTRL, 0x400);
- ess_write_reg(edma, ESS_PORT0_STATUS, ESS_PORT_1G_FDX);
- ess_write_reg(edma, ESS_PORT5_STATUS, ESS_PORT_1G_FDX);
- ess_write_reg(edma, ESS_PORT0_HEADER_CTRL, 0);
-#undef SET_PORT_BMP
-
- /* forward multicast and broadcast frames to CPU */
- ess_write_reg(edma, ESS_FWD_CTRL1,
- (ESS_PORTS_ALL << ESS_FWD_CTRL1_UC_FLOOD_S) |
- (ESS_PORTS_ALL << ESS_FWD_CTRL1_MC_FLOOD_S) |
- (ESS_PORTS_ALL << ESS_FWD_CTRL1_BC_FLOOD_S));
-
- return 0;
-}
-
-void ess_set_port_status_speed(struct edma_common_info *edma,
- struct phy_device *phydev, uint8_t port_id)
-{
- uint16_t reg_off = ESS_PORT0_STATUS + (4 * port_id);
- uint32_t reg_val = 0;
-
- ess_read_reg(edma, reg_off, ®_val);
-
- /* reset the speed bits [0:1] */
- reg_val &= ~ESS_PORT_STATUS_SPEED_INV;
-
- /* set the new speed */
- switch(phydev->speed) {
- case SPEED_1000: reg_val |= ESS_PORT_STATUS_SPEED_1000; break;
- case SPEED_100: reg_val |= ESS_PORT_STATUS_SPEED_100; break;
- case SPEED_10: reg_val |= ESS_PORT_STATUS_SPEED_10; break;
- default: reg_val |= ESS_PORT_STATUS_SPEED_INV; break;
- }
-
- /* check full/half duplex */
- if (phydev->duplex) {
- reg_val |= ESS_PORT_STATUS_DUPLEX_MODE;
- } else {
- reg_val &= ~ESS_PORT_STATUS_DUPLEX_MODE;
- }
-
- ess_write_reg(edma, reg_off, reg_val);
-}
-
-/* edma_change_tx_coalesce()
- * change tx interrupt moderation timer
- */
-void edma_change_tx_coalesce(int usecs)
-{
- u32 reg_value;
-
- /* Here, we right shift the value from the user by 1, this is
- * done because IMT resolution timer is 2usecs. 1 count
- * of this register corresponds to 2 usecs.
- */
- edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, ®_value);
- reg_value = ((reg_value & 0xffff) | ((usecs >> 1) << 16));
- edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value);
-}
-
-/* edma_change_rx_coalesce()
- * change rx interrupt moderation timer
- */
-void edma_change_rx_coalesce(int usecs)
-{
- u32 reg_value;
-
- /* Here, we right shift the value from the user by 1, this is
- * done because IMT resolution timer is 2usecs. 1 count
- * of this register corresponds to 2 usecs.
- */
- edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, ®_value);
- reg_value = ((reg_value & 0xffff0000) | (usecs >> 1));
- edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value);
-}
-
-/* edma_get_tx_rx_coalesce()
- * Get tx/rx interrupt moderation value
- */
-void edma_get_tx_rx_coalesce(u32 *reg_val)
-{
- edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_val);
-}
-
-void edma_read_append_stats(struct edma_common_info *edma_cinfo)
-{
- uint32_t *p;
- int i;
- u32 stat;
-
- spin_lock_bh(&edma_cinfo->stats_lock);
- p = (uint32_t *)&(edma_cinfo->edma_ethstats);
-
- for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) {
- edma_read_reg(EDMA_REG_TX_STAT_PKT_Q(i), &stat);
- *p += stat;
- p++;
- }
-
- for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) {
- edma_read_reg(EDMA_REG_TX_STAT_BYTE_Q(i), &stat);
- *p += stat;
- p++;
- }
-
- for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) {
- edma_read_reg(EDMA_REG_RX_STAT_PKT_Q(i), &stat);
- *p += stat;
- p++;
- }
-
- for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) {
- edma_read_reg(EDMA_REG_RX_STAT_BYTE_Q(i), &stat);
- *p += stat;
- p++;
- }
-
- spin_unlock_bh(&edma_cinfo->stats_lock);
-}
-
-static void edma_statistics_timer(struct timer_list *t)
-{
- struct edma_common_info *edma_cinfo =
- from_timer(edma_cinfo, t, edma_stats_timer);
-
- edma_read_append_stats(edma_cinfo);
-
- mod_timer(&edma_cinfo->edma_stats_timer, jiffies + 1*HZ);
-}
-
-static int edma_enable_stp_rstp(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- int ret;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
- if (write)
- edma_set_stp_rstp(edma_enable_rstp);
-
- return ret;
-}
-
-static int edma_ath_hdr_eth_type(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- int ret;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
- if (write)
- edma_assign_ath_hdr_type(edma_athr_hdr_eth_type);
-
- return ret;
-}
-
-static int edma_change_default_lan_vlan(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- struct edma_adapter *adapter;
- int ret;
-
- if (!edma_netdev[1]) {
- pr_err("Netdevice for default_lan does not exist\n");
- return -1;
- }
-
- adapter = netdev_priv(edma_netdev[1]);
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
-
- if (write)
- adapter->default_vlan_tag = edma_default_ltag;
-
- return ret;
-}
-
-static int edma_change_default_wan_vlan(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- struct edma_adapter *adapter;
- int ret;
-
- if (!edma_netdev[0]) {
- pr_err("Netdevice for default_wan does not exist\n");
- return -1;
- }
-
- adapter = netdev_priv(edma_netdev[0]);
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
-
- if (write)
- adapter->default_vlan_tag = edma_default_wtag;
-
- return ret;
-}
-
-static int edma_change_group1_vtag(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- struct edma_adapter *adapter;
- struct edma_common_info *edma_cinfo;
- int ret;
-
- if (!edma_netdev[0]) {
- pr_err("Netdevice for Group 1 does not exist\n");
- return -1;
- }
-
- adapter = netdev_priv(edma_netdev[0]);
- edma_cinfo = adapter->edma_cinfo;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
-
- if (write)
- adapter->default_vlan_tag = edma_default_group1_vtag;
-
- return ret;
-}
-
-static int edma_change_group2_vtag(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- struct edma_adapter *adapter;
- struct edma_common_info *edma_cinfo;
- int ret;
-
- if (!edma_netdev[1]) {
- pr_err("Netdevice for Group 2 does not exist\n");
- return -1;
- }
-
- adapter = netdev_priv(edma_netdev[1]);
- edma_cinfo = adapter->edma_cinfo;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
-
- if (write)
- adapter->default_vlan_tag = edma_default_group2_vtag;
-
- return ret;
-}
-
-static int edma_change_group3_vtag(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- struct edma_adapter *adapter;
- struct edma_common_info *edma_cinfo;
- int ret;
-
- if (!edma_netdev[2]) {
- pr_err("Netdevice for Group 3 does not exist\n");
- return -1;
- }
-
- adapter = netdev_priv(edma_netdev[2]);
- edma_cinfo = adapter->edma_cinfo;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
-
- if (write)
- adapter->default_vlan_tag = edma_default_group3_vtag;
-
- return ret;
-}
-
-static int edma_change_group4_vtag(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- struct edma_adapter *adapter;
- struct edma_common_info *edma_cinfo;
- int ret;
-
- if (!edma_netdev[3]) {
- pr_err("Netdevice for Group 4 does not exist\n");
- return -1;
- }
-
- adapter = netdev_priv(edma_netdev[3]);
- edma_cinfo = adapter->edma_cinfo;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
-
- if (write)
- adapter->default_vlan_tag = edma_default_group4_vtag;
-
- return ret;
-}
-
-static int edma_change_group5_vtag(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- struct edma_adapter *adapter;
- struct edma_common_info *edma_cinfo;
- int ret;
-
- if (!edma_netdev[4]) {
- pr_err("Netdevice for Group 5 does not exist\n");
- return -1;
- }
-
- adapter = netdev_priv(edma_netdev[4]);
- edma_cinfo = adapter->edma_cinfo;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
-
- if (write)
- adapter->default_vlan_tag = edma_default_group5_vtag;
-
- return ret;
-}
-
-static int edma_set_rss_idt_value(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- int ret;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
- if (write && !ret)
- edma_write_reg(EDMA_REG_RSS_IDT(edma_rss_idt_idx),
- edma_rss_idt_val);
- return ret;
-}
-
-static int edma_set_rss_idt_idx(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- int ret;
- u32 old_value = edma_rss_idt_idx;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
- if (!write || ret)
- return ret;
-
- if (edma_rss_idt_idx >= EDMA_NUM_IDT) {
- pr_err("Invalid RSS indirection table index %d\n",
- edma_rss_idt_idx);
- edma_rss_idt_idx = old_value;
- return -EINVAL;
- }
- return ret;
-}
-
-static int edma_weight_assigned_to_queues(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- int ret, queue_id, weight;
- u32 reg_data, data, reg_addr;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
- if (write) {
- queue_id = edma_weight_assigned_to_q & EDMA_WRR_VID_SCTL_MASK;
- if (queue_id < 0 || queue_id > 15) {
- pr_err("queue_id not within desired range\n");
- return -EINVAL;
- }
-
- weight = edma_weight_assigned_to_q >> EDMA_WRR_VID_SCTL_SHIFT;
- if (weight < 0 || weight > 0xF) {
- pr_err("queue_id not within desired range\n");
- return -EINVAL;
- }
-
- data = weight << EDMA_WRR_SHIFT(queue_id);
-
- reg_addr = EDMA_REG_WRR_CTRL_Q0_Q3 + (queue_id & ~0x3);
- edma_read_reg(reg_addr, ®_data);
- reg_data &= ~(1 << EDMA_WRR_SHIFT(queue_id));
- edma_write_reg(reg_addr, data | reg_data);
- }
-
- return ret;
-}
-
-static int edma_queue_to_virtual_queue_map(struct ctl_table *table, int write,
- void __user *buffer, size_t *lenp,
- loff_t *ppos)
-{
- int ret, queue_id, virtual_qid;
- u32 reg_data, data, reg_addr;
-
- ret = proc_dointvec(table, write, buffer, lenp, ppos);
- if (write) {
- queue_id = edma_queue_to_virtual_q & EDMA_WRR_VID_SCTL_MASK;
- if (queue_id < 0 || queue_id > 15) {
- pr_err("queue_id not within desired range\n");
- return -EINVAL;
- }
-
- virtual_qid = edma_queue_to_virtual_q >>
- EDMA_WRR_VID_SCTL_SHIFT;
- if (virtual_qid < 0 || virtual_qid > 8) {
- pr_err("queue_id not within desired range\n");
- return -EINVAL;
- }
-
- data = virtual_qid << EDMA_VQ_ID_SHIFT(queue_id);
-
- reg_addr = EDMA_REG_VQ_CTRL0 + (queue_id & ~0x3);
- edma_read_reg(reg_addr, ®_data);
- reg_data &= ~(1 << EDMA_VQ_ID_SHIFT(queue_id));
- edma_write_reg(reg_addr, data | reg_data);
- }
-
- return ret;
-}
-
-static struct ctl_table edma_table[] = {
- {
- .procname = "default_lan_tag",
- .data = &edma_default_ltag,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_change_default_lan_vlan
- },
- {
- .procname = "default_wan_tag",
- .data = &edma_default_wtag,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_change_default_wan_vlan
- },
- {
- .procname = "weight_assigned_to_queues",
- .data = &edma_weight_assigned_to_q,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_weight_assigned_to_queues
- },
- {
- .procname = "queue_to_virtual_queue_map",
- .data = &edma_queue_to_virtual_q,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_queue_to_virtual_queue_map
- },
- {
- .procname = "enable_stp_rstp",
- .data = &edma_enable_rstp,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_enable_stp_rstp
- },
- {
- .procname = "athr_hdr_eth_type",
- .data = &edma_athr_hdr_eth_type,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_ath_hdr_eth_type
- },
- {
- .procname = "default_group1_vlan_tag",
- .data = &edma_default_group1_vtag,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_change_group1_vtag
- },
- {
- .procname = "default_group2_vlan_tag",
- .data = &edma_default_group2_vtag,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_change_group2_vtag
- },
- {
- .procname = "default_group3_vlan_tag",
- .data = &edma_default_group3_vtag,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_change_group3_vtag
- },
- {
- .procname = "default_group4_vlan_tag",
- .data = &edma_default_group4_vtag,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_change_group4_vtag
- },
- {
- .procname = "default_group5_vlan_tag",
- .data = &edma_default_group5_vtag,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_change_group5_vtag
- },
- {
- .procname = "edma_rss_idt_value",
- .data = &edma_rss_idt_val,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_set_rss_idt_value
- },
- {
- .procname = "edma_rss_idt_idx",
- .data = &edma_rss_idt_idx,
- .maxlen = sizeof(int),
- .mode = 0644,
- .proc_handler = edma_set_rss_idt_idx
- },
- {}
-};
-
-static int ess_parse(struct edma_common_info *edma)
-{
- struct device_node *switch_node;
- int ret = -EINVAL;
-
- switch_node = of_find_node_by_name(NULL, "ess-switch");
- if (!switch_node) {
- pr_err("cannot find ess-switch node\n");
- goto out;
- }
-
- edma->ess_hw_addr = of_io_request_and_map(switch_node,
- 0, KBUILD_MODNAME);
- if (!edma->ess_hw_addr) {
- pr_err("%s ioremap fail.", __func__);
- goto out;
- }
-
- edma->ess_clk = of_clk_get_by_name(switch_node, "ess_clk");
- ret = clk_prepare_enable(edma->ess_clk);
-out:
- of_node_put(switch_node);
- return ret;
-}
-
-/* edma_axi_netdev_ops
- * Describe the operations supported by registered netdevices
- *
- * static const struct net_device_ops edma_axi_netdev_ops = {
- * .ndo_open = edma_open,
- * .ndo_stop = edma_close,
- * .ndo_start_xmit = edma_xmit_frame,
- * .ndo_set_mac_address = edma_set_mac_addr,
- * }
- */
-static const struct net_device_ops edma_axi_netdev_ops = {
- .ndo_open = edma_open,
- .ndo_stop = edma_close,
- .ndo_start_xmit = edma_xmit,
- .ndo_set_mac_address = edma_set_mac_addr,
-#ifdef CONFIG_RFS_ACCEL
- .ndo_rx_flow_steer = edma_rx_flow_steer,
- .ndo_register_rfs_filter = edma_register_rfs_filter,
- .ndo_get_default_vlan_tag = edma_get_default_vlan_tag,
-#endif
- .ndo_get_stats = edma_get_stats,
-};
-
-/* edma_axi_probe()
- * Initialise an adapter identified by a platform_device structure.
- *
- * The OS initialization, configuring of the adapter private structure,
- * and a hardware reset occur in the probe.
- */
-static int edma_axi_probe(struct platform_device *pdev)
-{
- struct edma_common_info *edma_cinfo;
- struct edma_hw *hw;
- struct edma_adapter *adapter[EDMA_MAX_PORTID_SUPPORTED];
- struct resource *res;
- struct device_node *np = pdev->dev.of_node;
- struct device_node *pnp;
- struct device_node *mdio_node = NULL;
- struct mii_bus *miibus = NULL;
- int i, j, k, err = 0;
- int portid_bmp;
- int idx = 0, idx_mac = 0;
-
- if (CONFIG_NR_CPUS != EDMA_CPU_CORES_SUPPORTED) {
- dev_err(&pdev->dev, "Invalid CPU Cores\n");
- return -EINVAL;
- }
-
- if ((num_rxq != 4) && (num_rxq != 8)) {
- dev_err(&pdev->dev, "Invalid RX queue, edma probe failed\n");
- return -EINVAL;
- }
- edma_cinfo = kzalloc(sizeof(struct edma_common_info), GFP_KERNEL);
- if (!edma_cinfo) {
- err = -ENOMEM;
- goto err_alloc;
- }
-
- edma_cinfo->pdev = pdev;
-
- of_property_read_u32(np, "qcom,num_gmac", &edma_cinfo->num_gmac);
- if (edma_cinfo->num_gmac > EDMA_MAX_PORTID_SUPPORTED) {
- pr_err("Invalid DTSI Entry for qcom,num_gmac\n");
- err = -EINVAL;
- goto err_cinfo;
- }
-
- /* Initialize the netdev array before allocation
- * to avoid double free
- */
- for (i = 0 ; i < edma_cinfo->num_gmac ; i++)
- edma_netdev[i] = NULL;
-
- for (i = 0 ; i < edma_cinfo->num_gmac ; i++) {
- edma_netdev[i] = alloc_etherdev_mqs(sizeof(struct edma_adapter),
- EDMA_NETDEV_TX_QUEUE, EDMA_NETDEV_RX_QUEUE);
-
- if (!edma_netdev[i]) {
- dev_err(&pdev->dev,
- "net device alloc fails for index=%d\n", i);
- err = -ENODEV;
- goto err_ioremap;
- }
-
- SET_NETDEV_DEV(edma_netdev[i], &pdev->dev);
- platform_set_drvdata(pdev, edma_netdev[i]);
- edma_cinfo->netdev[i] = edma_netdev[i];
- }
-
- /* Fill ring details */
- edma_cinfo->num_tx_queues = EDMA_MAX_TRANSMIT_QUEUE;
- edma_cinfo->num_txq_per_core = (EDMA_MAX_TRANSMIT_QUEUE / 4);
- edma_cinfo->tx_ring_count = EDMA_TX_RING_SIZE;
-
- /* Update num rx queues based on module parameter */
- edma_cinfo->num_rx_queues = num_rxq;
- edma_cinfo->num_rxq_per_core = ((num_rxq == 4) ? 1 : 2);
-
- edma_cinfo->rx_ring_count = EDMA_RX_RING_SIZE;
-
- hw = &edma_cinfo->hw;
-
- /* Fill HW defaults */
- hw->tx_intr_mask = EDMA_TX_IMR_NORMAL_MASK;
- hw->rx_intr_mask = EDMA_RX_IMR_NORMAL_MASK;
-
- of_property_read_u32(np, "qcom,page-mode", &edma_cinfo->page_mode);
- of_property_read_u32(np, "qcom,rx_head_buf_size",
- &hw->rx_head_buff_size);
-
- if (overwrite_mode) {
- dev_info(&pdev->dev, "page mode overwritten");
- edma_cinfo->page_mode = page_mode;
- }
-
- if (jumbo_mru)
- edma_cinfo->fraglist_mode = 1;
-
- if (edma_cinfo->page_mode)
- hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE_JUMBO;
- else if (edma_cinfo->fraglist_mode)
- hw->rx_head_buff_size = jumbo_mru;
- else if (!hw->rx_head_buff_size)
- hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE;
-
- hw->misc_intr_mask = 0;
- hw->wol_intr_mask = 0;
-
- hw->intr_clear_type = EDMA_INTR_CLEAR_TYPE;
- hw->intr_sw_idx_w = EDMA_INTR_SW_IDX_W_TYPE;
-
- /* configure RSS type to the different protocol that can be
- * supported
- */
- hw->rss_type = EDMA_RSS_TYPE_IPV4TCP | EDMA_RSS_TYPE_IPV6_TCP |
- EDMA_RSS_TYPE_IPV4_UDP | EDMA_RSS_TYPE_IPV6UDP |
- EDMA_RSS_TYPE_IPV4 | EDMA_RSS_TYPE_IPV6;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
- edma_cinfo->hw.hw_addr = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(edma_cinfo->hw.hw_addr)) {
- err = PTR_ERR(edma_cinfo->hw.hw_addr);
- goto err_ioremap;
- }
-
- edma_hw_addr = (u32)edma_cinfo->hw.hw_addr;
-
- /* Parse tx queue interrupt number from device tree */
- for (i = 0; i < edma_cinfo->num_tx_queues; i++)
- edma_cinfo->tx_irq[i] = platform_get_irq(pdev, i);
-
- /* Parse rx queue interrupt number from device tree
- * Here we are setting j to point to the point where we
- * left tx interrupt parsing(i.e 16) and run run the loop
- * from 0 to 7 to parse rx interrupt number.
- */
- for (i = 0, j = edma_cinfo->num_tx_queues, k = 0;
- i < edma_cinfo->num_rx_queues; i++) {
- edma_cinfo->rx_irq[k] = platform_get_irq(pdev, j);
- k += ((num_rxq == 4) ? 2 : 1);
- j += ((num_rxq == 4) ? 2 : 1);
- }
-
- edma_cinfo->rx_head_buffer_len = edma_cinfo->hw.rx_head_buff_size;
- edma_cinfo->rx_page_buffer_len = PAGE_SIZE;
-
- err = edma_alloc_queues_tx(edma_cinfo);
- if (err) {
- dev_err(&pdev->dev, "Allocation of TX queue failed\n");
- goto err_tx_qinit;
- }
-
- err = edma_alloc_queues_rx(edma_cinfo);
- if (err) {
- dev_err(&pdev->dev, "Allocation of RX queue failed\n");
- goto err_rx_qinit;
- }
-
- err = edma_alloc_tx_rings(edma_cinfo);
- if (err) {
- dev_err(&pdev->dev, "Allocation of TX resources failed\n");
- goto err_tx_rinit;
- }
-
- err = edma_alloc_rx_rings(edma_cinfo);
- if (err) {
- dev_err(&pdev->dev, "Allocation of RX resources failed\n");
- goto err_rx_rinit;
- }
-
- /* Initialize netdev and netdev bitmap for transmit descriptor rings */
- for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
- struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[i];
- int j;
-
- etdr->netdev_bmp = 0;
- for (j = 0; j < EDMA_MAX_NETDEV_PER_QUEUE; j++) {
- etdr->netdev[j] = NULL;
- etdr->nq[j] = NULL;
- }
- }
-
- if (of_property_read_bool(np, "qcom,mdio_supported")) {
- mdio_node = of_find_compatible_node(NULL, NULL,
- "qcom,ipq4019-mdio");
- if (!mdio_node) {
- dev_err(&pdev->dev, "cannot find mdio node by phandle");
- err = -EIO;
- goto err_mdiobus_init_fail;
- }
-
- miibus = of_mdio_find_bus(mdio_node);
- if (!miibus)
- return -EINVAL;
- }
-
- if (of_property_read_bool(np, "qcom,single-phy") &&
- edma_cinfo->num_gmac == 1) {
- err = ess_parse(edma_cinfo);
- if (!err)
- err = ess_reset(edma_cinfo);
- if (err)
- goto err_single_phy_init;
- else
- edma_cinfo->is_single_phy = true;
- }
-
- for_each_available_child_of_node(np, pnp) {
- /* this check is needed if parent and daughter dts have
- * different number of gmac nodes
- */
- if (idx_mac == edma_cinfo->num_gmac) {
- of_node_put(np);
- break;
- }
-
- of_get_mac_address(pnp, edma_netdev[idx_mac]->dev_addr);
-
- idx_mac++;
- }
-
- /* Populate the adapter structure register the netdevice */
- for (i = 0; i < edma_cinfo->num_gmac; i++) {
- int k, m;
-
- adapter[i] = netdev_priv(edma_netdev[i]);
- adapter[i]->netdev = edma_netdev[i];
- adapter[i]->pdev = pdev;
- for (j = 0; j < CONFIG_NR_CPUS; j++) {
- m = i % 2;
- adapter[i]->tx_start_offset[j] =
- ((j << EDMA_TX_CPU_START_SHIFT) + (m << 1));
- /* Share the queues with available net-devices.
- * For instance , with 5 net-devices
- * eth0/eth2/eth4 will share q0,q1,q4,q5,q8,q9,q12,q13
- * and eth1/eth3 will get the remaining.
- */
- for (k = adapter[i]->tx_start_offset[j]; k <
- (adapter[i]->tx_start_offset[j] + 2); k++) {
- if (edma_fill_netdev(edma_cinfo, k, i, j)) {
- pr_err("Netdev overflow Error\n");
- goto err_register;
- }
- }
- }
-
- adapter[i]->edma_cinfo = edma_cinfo;
- edma_netdev[i]->netdev_ops = &edma_axi_netdev_ops;
- edma_netdev[i]->max_mtu = 9000;
- edma_netdev[i]->features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM
- | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_SG |
- NETIF_F_TSO | NETIF_F_GRO | NETIF_F_HW_VLAN_CTAG_TX;
- edma_netdev[i]->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
- NETIF_F_HW_VLAN_CTAG_RX
- | NETIF_F_SG | NETIF_F_TSO | NETIF_F_GRO;
- edma_netdev[i]->vlan_features = NETIF_F_HW_CSUM | NETIF_F_SG |
- NETIF_F_TSO | NETIF_F_GRO;
- edma_netdev[i]->wanted_features = NETIF_F_HW_CSUM | NETIF_F_SG |
- NETIF_F_TSO | NETIF_F_GRO;
-
-#ifdef CONFIG_RFS_ACCEL
- edma_netdev[i]->features |= NETIF_F_NTUPLE | NETIF_F_RXHASH;
- edma_netdev[i]->hw_features |= NETIF_F_NTUPLE | NETIF_F_RXHASH;
- edma_netdev[i]->vlan_features |= NETIF_F_NTUPLE | NETIF_F_RXHASH;
- edma_netdev[i]->wanted_features |= NETIF_F_NTUPLE | NETIF_F_RXHASH;
-#endif
- edma_set_ethtool_ops(edma_netdev[i]);
-
- /* This just fill in some default MAC address
- */
- if (!is_valid_ether_addr(edma_netdev[i]->dev_addr)) {
- random_ether_addr(edma_netdev[i]->dev_addr);
- pr_info("EDMA using MAC@ - using");
- pr_info("%02x:%02x:%02x:%02x:%02x:%02x\n",
- *(edma_netdev[i]->dev_addr),
- *(edma_netdev[i]->dev_addr + 1),
- *(edma_netdev[i]->dev_addr + 2),
- *(edma_netdev[i]->dev_addr + 3),
- *(edma_netdev[i]->dev_addr + 4),
- *(edma_netdev[i]->dev_addr + 5));
- }
-
- err = register_netdev(edma_netdev[i]);
- if (err)
- goto err_register;
-
- /* carrier off reporting is important to
- * ethtool even BEFORE open
- */
- netif_carrier_off(edma_netdev[i]);
-
- /* Allocate reverse irq cpu mapping structure for
- * receive queues
- */
-#ifdef CONFIG_RFS_ACCEL
- edma_netdev[i]->rx_cpu_rmap =
- alloc_irq_cpu_rmap(EDMA_NETDEV_RX_QUEUE);
- if (!edma_netdev[i]->rx_cpu_rmap) {
- err = -ENOMEM;
- goto err_rmap_alloc_fail;
- }
-#endif
- }
-
- for (i = 0; i < EDMA_MAX_PORTID_BITMAP_INDEX; i++)
- edma_cinfo->portid_netdev_lookup_tbl[i] = NULL;
-
- for_each_available_child_of_node(np, pnp) {
- const uint32_t *vlan_tag = NULL;
- int len;
-
- /* this check is needed if parent and daughter dts have
- * different number of gmac nodes
- */
- if (idx == edma_cinfo->num_gmac)
- break;
-
- /* Populate port-id to netdev lookup table */
- vlan_tag = of_get_property(pnp, "vlan_tag", &len);
- if (!vlan_tag) {
- pr_err("Vlan tag parsing Failed.\n");
- goto err_rmap_alloc_fail;
- }
-
- adapter[idx]->default_vlan_tag = of_read_number(vlan_tag, 1);
- vlan_tag++;
- portid_bmp = of_read_number(vlan_tag, 1);
- adapter[idx]->dp_bitmap = portid_bmp;
-
- portid_bmp = portid_bmp >> 1; /* We ignore CPU Port bit 0 */
- while (portid_bmp) {
- int port_bit = ffs(portid_bmp);
-
- if (port_bit > EDMA_MAX_PORTID_SUPPORTED)
- goto err_rmap_alloc_fail;
- edma_cinfo->portid_netdev_lookup_tbl[port_bit] =
- edma_netdev[idx];
- portid_bmp &= ~(1 << (port_bit - 1));
- }
-
- if (!of_property_read_u32(pnp, "qcom,poll_required",
- &adapter[idx]->poll_required)) {
- if (adapter[idx]->poll_required) {
- of_property_read_u32(pnp, "qcom,phy_mdio_addr",
- &adapter[idx]->phy_mdio_addr);
- of_property_read_u32(pnp, "qcom,forced_speed",
- &adapter[idx]->forced_speed);
- of_property_read_u32(pnp, "qcom,forced_duplex",
- &adapter[idx]->forced_duplex);
-
- /* create a phyid using MDIO bus id
- * and MDIO bus address
- */
- snprintf(adapter[idx]->phy_id,
- MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
- miibus->id,
- adapter[idx]->phy_mdio_addr);
- }
- } else {
- adapter[idx]->poll_required = 0;
- adapter[idx]->forced_speed = SPEED_1000;
- adapter[idx]->forced_duplex = DUPLEX_FULL;
- }
-
- idx++;
- }
-
- edma_cinfo->edma_ctl_table_hdr = register_net_sysctl(&init_net,
- "net/edma",
- edma_table);
- if (!edma_cinfo->edma_ctl_table_hdr) {
- dev_err(&pdev->dev, "edma sysctl table hdr not registered\n");
- goto err_unregister_sysctl_tbl;
- }
-
- /* Disable all 16 Tx and 8 rx irqs */
- edma_irq_disable(edma_cinfo);
-
- err = edma_reset(edma_cinfo);
- if (err) {
- err = -EIO;
- goto err_reset;
- }
-
- /* populate per_core_info, do a napi_Add, request 16 TX irqs,
- * 8 RX irqs, do a napi enable
- */
- for (i = 0; i < CONFIG_NR_CPUS; i++) {
- u8 rx_start;
-
- edma_cinfo->edma_percpu_info[i].napi.state = 0;
-
- netif_napi_add(edma_netdev[0],
- &edma_cinfo->edma_percpu_info[i].napi,
- edma_poll, 64);
- napi_enable(&edma_cinfo->edma_percpu_info[i].napi);
- edma_cinfo->edma_percpu_info[i].tx_mask = tx_mask[i];
- edma_cinfo->edma_percpu_info[i].rx_mask = EDMA_RX_PER_CPU_MASK
- << (i << EDMA_RX_PER_CPU_MASK_SHIFT);
- edma_cinfo->edma_percpu_info[i].tx_start = tx_start[i];
- edma_cinfo->edma_percpu_info[i].rx_start =
- i << EDMA_RX_CPU_START_SHIFT;
- rx_start = i << EDMA_RX_CPU_START_SHIFT;
- edma_cinfo->edma_percpu_info[i].tx_status = 0;
- edma_cinfo->edma_percpu_info[i].rx_status = 0;
- edma_cinfo->edma_percpu_info[i].edma_cinfo = edma_cinfo;
-
- /* Request irq per core */
- for (j = edma_cinfo->edma_percpu_info[i].tx_start;
- j < tx_start[i] + 4; j++) {
- sprintf(&edma_tx_irq[j][0], "edma_eth_tx%d", j);
- err = request_irq(edma_cinfo->tx_irq[j],
- edma_interrupt,
- 0,
- &edma_tx_irq[j][0],
- &edma_cinfo->edma_percpu_info[i]);
- if (err)
- goto err_reset;
- }
-
- for (j = edma_cinfo->edma_percpu_info[i].rx_start;
- j < (rx_start +
- ((edma_cinfo->num_rx_queues == 4) ? 1 : 2));
- j++) {
- sprintf(&edma_rx_irq[j][0], "edma_eth_rx%d", j);
- err = request_irq(edma_cinfo->rx_irq[j],
- edma_interrupt,
- 0,
- &edma_rx_irq[j][0],
- &edma_cinfo->edma_percpu_info[i]);
- if (err)
- goto err_reset;
- }
-
-#ifdef CONFIG_RFS_ACCEL
- for (j = edma_cinfo->edma_percpu_info[i].rx_start;
- j < rx_start + 2; j += 2) {
- err = irq_cpu_rmap_add(edma_netdev[0]->rx_cpu_rmap,
- edma_cinfo->rx_irq[j]);
- if (err)
- goto err_rmap_add_fail;
- }
-#endif
- }
-
- /* Used to clear interrupt status, allocate rx buffer,
- * configure edma descriptors registers
- */
- err = edma_configure(edma_cinfo);
- if (err) {
- err = -EIO;
- goto err_configure;
- }
-
- /* Configure RSS indirection table.
- * 128 hash will be configured in the following
- * pattern: hash{0,1,2,3} = {Q0,Q2,Q4,Q6} respectively
- * and so on
- */
- for (i = 0; i < EDMA_NUM_IDT; i++)
- edma_write_reg(EDMA_REG_RSS_IDT(i), EDMA_RSS_IDT_VALUE);
-
- /* Configure load balance mapping table.
- * 4 table entry will be configured according to the
- * following pattern: load_balance{0,1,2,3} = {Q0,Q1,Q3,Q4}
- * respectively.
- */
- edma_write_reg(EDMA_REG_LB_RING, EDMA_LB_REG_VALUE);
-
- /* Configure Virtual queue for Tx rings
- * User can also change this value runtime through
- * a sysctl
- */
- edma_write_reg(EDMA_REG_VQ_CTRL0, EDMA_VQ_REG_VALUE);
- edma_write_reg(EDMA_REG_VQ_CTRL1, EDMA_VQ_REG_VALUE);
-
- /* Configure Max AXI Burst write size to 128 bytes*/
- edma_write_reg(EDMA_REG_AXIW_CTRL_MAXWRSIZE,
- EDMA_AXIW_MAXWRSIZE_VALUE);
-
- /* Enable All 16 tx and 8 rx irq mask */
- edma_irq_enable(edma_cinfo);
- edma_enable_tx_ctrl(&edma_cinfo->hw);
- edma_enable_rx_ctrl(&edma_cinfo->hw);
-
- for (i = 0; i < edma_cinfo->num_gmac; i++) {
- if (adapter[i]->poll_required) {
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,5,0)
- phy_interface_t phy_mode;
-
- err = of_get_phy_mode(np, &phy_mode);
- if (err)
- phy_mode = PHY_INTERFACE_MODE_SGMII;
-#else
- int phy_mode = of_get_phy_mode(np);
- if (phy_mode < 0)
- phy_mode = PHY_INTERFACE_MODE_SGMII;
-#endif
- adapter[i]->phydev =
- phy_connect(edma_netdev[i],
- (const char *)adapter[i]->phy_id,
- &edma_adjust_link,
- phy_mode);
- if (IS_ERR(adapter[i]->phydev)) {
- dev_dbg(&pdev->dev, "PHY attach FAIL");
- err = -EIO;
- goto edma_phy_attach_fail;
- } else {
- linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
- adapter[i]->phydev->advertising);
- linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
- adapter[i]->phydev->advertising);
- linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT,
- adapter[i]->phydev->supported);
- linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
- adapter[i]->phydev->supported);
- }
- } else {
- adapter[i]->phydev = NULL;
- }
- }
-
- spin_lock_init(&edma_cinfo->stats_lock);
-
- timer_setup(&edma_cinfo->edma_stats_timer, edma_statistics_timer, 0);
- mod_timer(&edma_cinfo->edma_stats_timer, jiffies + 1*HZ);
-
- return 0;
-
-edma_phy_attach_fail:
- miibus = NULL;
-err_configure:
-#ifdef CONFIG_RFS_ACCEL
- for (i = 0; i < edma_cinfo->num_gmac; i++) {
- free_irq_cpu_rmap(adapter[i]->netdev->rx_cpu_rmap);
- adapter[i]->netdev->rx_cpu_rmap = NULL;
- }
-#endif
-err_rmap_add_fail:
- edma_free_irqs(adapter[0]);
- for (i = 0; i < CONFIG_NR_CPUS; i++)
- napi_disable(&edma_cinfo->edma_percpu_info[i].napi);
-err_reset:
-err_unregister_sysctl_tbl:
-err_rmap_alloc_fail:
- for (i = 0; i < edma_cinfo->num_gmac; i++)
- unregister_netdev(edma_netdev[i]);
-err_register:
-err_single_phy_init:
- iounmap(edma_cinfo->ess_hw_addr);
- clk_disable_unprepare(edma_cinfo->ess_clk);
-err_mdiobus_init_fail:
- edma_free_rx_rings(edma_cinfo);
-err_rx_rinit:
- edma_free_tx_rings(edma_cinfo);
-err_tx_rinit:
- edma_free_queues(edma_cinfo);
-err_rx_qinit:
-err_tx_qinit:
- iounmap(edma_cinfo->hw.hw_addr);
-err_ioremap:
- for (i = 0; i < edma_cinfo->num_gmac; i++) {
- if (edma_netdev[i])
- free_netdev(edma_netdev[i]);
- }
-err_cinfo:
- kfree(edma_cinfo);
-err_alloc:
- return err;
-}
-
-/* edma_axi_remove()
- * Device Removal Routine
- *
- * edma_axi_remove is called by the platform subsystem to alert the driver
- * that it should release a platform device.
- */
-static int edma_axi_remove(struct platform_device *pdev)
-{
- struct edma_adapter *adapter = netdev_priv(edma_netdev[0]);
- struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
- struct edma_hw *hw = &edma_cinfo->hw;
- int i;
-
- for (i = 0; i < edma_cinfo->num_gmac; i++)
- unregister_netdev(edma_netdev[i]);
-
- edma_stop_rx_tx(hw);
- for (i = 0; i < CONFIG_NR_CPUS; i++)
- napi_disable(&edma_cinfo->edma_percpu_info[i].napi);
-
- edma_irq_disable(edma_cinfo);
- edma_write_reg(EDMA_REG_RX_ISR, 0xff);
- edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
-#ifdef CONFIG_RFS_ACCEL
- for (i = 0; i < edma_cinfo->num_gmac; i++) {
- free_irq_cpu_rmap(edma_netdev[i]->rx_cpu_rmap);
- edma_netdev[i]->rx_cpu_rmap = NULL;
- }
-#endif
-
- for (i = 0; i < edma_cinfo->num_gmac; i++) {
- struct edma_adapter *adapter = netdev_priv(edma_netdev[i]);
-
- if (adapter->phydev)
- phy_disconnect(adapter->phydev);
- }
-
- del_timer_sync(&edma_cinfo->edma_stats_timer);
- edma_free_irqs(adapter);
- unregister_net_sysctl_table(edma_cinfo->edma_ctl_table_hdr);
- iounmap(edma_cinfo->ess_hw_addr);
- clk_disable_unprepare(edma_cinfo->ess_clk);
- edma_free_tx_resources(edma_cinfo);
- edma_free_rx_resources(edma_cinfo);
- edma_free_tx_rings(edma_cinfo);
- edma_free_rx_rings(edma_cinfo);
- edma_free_queues(edma_cinfo);
- for (i = 0; i < edma_cinfo->num_gmac; i++)
- free_netdev(edma_netdev[i]);
-
- kfree(edma_cinfo);
-
- return 0;
-}
-
-static const struct of_device_id edma_of_mtable[] = {
- {.compatible = "qcom,ess-edma" },
- {}
-};
-MODULE_DEVICE_TABLE(of, edma_of_mtable);
-
-static struct platform_driver edma_axi_driver = {
- .driver = {
- .name = edma_axi_driver_name,
- .of_match_table = edma_of_mtable,
- },
- .probe = edma_axi_probe,
- .remove = edma_axi_remove,
-};
-
-module_platform_driver(edma_axi_driver);
-
-MODULE_AUTHOR("Qualcomm Atheros Inc");
-MODULE_DESCRIPTION("QCA ESS EDMA driver");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c
deleted file mode 100644
index 65706cfae1..0000000000
--- a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * Copyright (c) 2015 - 2016, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for
- * any purpose with or without fee is hereby granted, provided that the
- * above copyright notice and this permission notice appear in all copies.
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
- * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/ethtool.h>
-#include <linux/netdevice.h>
-#include <linux/string.h>
-#include <linux/version.h>
-#include "edma.h"
-
-struct edma_ethtool_stats {
- uint8_t stat_string[ETH_GSTRING_LEN];
- uint32_t stat_offset;
-};
-
-#define EDMA_STAT(m) offsetof(struct edma_ethtool_statistics, m)
-#define DRVINFO_LEN 32
-
-/* Array of strings describing statistics
- */
-static const struct edma_ethtool_stats edma_gstrings_stats[] = {
- {"tx_q0_pkt", EDMA_STAT(tx_q0_pkt)},
- {"tx_q1_pkt", EDMA_STAT(tx_q1_pkt)},
- {"tx_q2_pkt", EDMA_STAT(tx_q2_pkt)},
- {"tx_q3_pkt", EDMA_STAT(tx_q3_pkt)},
- {"tx_q4_pkt", EDMA_STAT(tx_q4_pkt)},
- {"tx_q5_pkt", EDMA_STAT(tx_q5_pkt)},
- {"tx_q6_pkt", EDMA_STAT(tx_q6_pkt)},
- {"tx_q7_pkt", EDMA_STAT(tx_q7_pkt)},
- {"tx_q8_pkt", EDMA_STAT(tx_q8_pkt)},
- {"tx_q9_pkt", EDMA_STAT(tx_q9_pkt)},
- {"tx_q10_pkt", EDMA_STAT(tx_q10_pkt)},
- {"tx_q11_pkt", EDMA_STAT(tx_q11_pkt)},
- {"tx_q12_pkt", EDMA_STAT(tx_q12_pkt)},
- {"tx_q13_pkt", EDMA_STAT(tx_q13_pkt)},
- {"tx_q14_pkt", EDMA_STAT(tx_q14_pkt)},
- {"tx_q15_pkt", EDMA_STAT(tx_q15_pkt)},
- {"tx_q0_byte", EDMA_STAT(tx_q0_byte)},
- {"tx_q1_byte", EDMA_STAT(tx_q1_byte)},
- {"tx_q2_byte", EDMA_STAT(tx_q2_byte)},
- {"tx_q3_byte", EDMA_STAT(tx_q3_byte)},
- {"tx_q4_byte", EDMA_STAT(tx_q4_byte)},
- {"tx_q5_byte", EDMA_STAT(tx_q5_byte)},
- {"tx_q6_byte", EDMA_STAT(tx_q6_byte)},
- {"tx_q7_byte", EDMA_STAT(tx_q7_byte)},
- {"tx_q8_byte", EDMA_STAT(tx_q8_byte)},
- {"tx_q9_byte", EDMA_STAT(tx_q9_byte)},
- {"tx_q10_byte", EDMA_STAT(tx_q10_byte)},
- {"tx_q11_byte", EDMA_STAT(tx_q11_byte)},
- {"tx_q12_byte", EDMA_STAT(tx_q12_byte)},
- {"tx_q13_byte", EDMA_STAT(tx_q13_byte)},
- {"tx_q14_byte", EDMA_STAT(tx_q14_byte)},
- {"tx_q15_byte", EDMA_STAT(tx_q15_byte)},
- {"rx_q0_pkt", EDMA_STAT(rx_q0_pkt)},
- {"rx_q1_pkt", EDMA_STAT(rx_q1_pkt)},
- {"rx_q2_pkt", EDMA_STAT(rx_q2_pkt)},
- {"rx_q3_pkt", EDMA_STAT(rx_q3_pkt)},
- {"rx_q4_pkt", EDMA_STAT(rx_q4_pkt)},
- {"rx_q5_pkt", EDMA_STAT(rx_q5_pkt)},
- {"rx_q6_pkt", EDMA_STAT(rx_q6_pkt)},
- {"rx_q7_pkt", EDMA_STAT(rx_q7_pkt)},
- {"rx_q0_byte", EDMA_STAT(rx_q0_byte)},
- {"rx_q1_byte", EDMA_STAT(rx_q1_byte)},
- {"rx_q2_byte", EDMA_STAT(rx_q2_byte)},
- {"rx_q3_byte", EDMA_STAT(rx_q3_byte)},
- {"rx_q4_byte", EDMA_STAT(rx_q4_byte)},
- {"rx_q5_byte", EDMA_STAT(rx_q5_byte)},
- {"rx_q6_byte", EDMA_STAT(rx_q6_byte)},
- {"rx_q7_byte", EDMA_STAT(rx_q7_byte)},
- {"tx_desc_error", EDMA_STAT(tx_desc_error)},
- {"rx_alloc_fail_ctr", EDMA_STAT(rx_alloc_fail_ctr)},
-};
-
-#define EDMA_STATS_LEN ARRAY_SIZE(edma_gstrings_stats)
-
-/* edma_get_strset_count()
- * Get strset count
- */
-static int edma_get_strset_count(struct net_device *netdev,
- int sset)
-{
- switch (sset) {
- case ETH_SS_STATS:
- return EDMA_STATS_LEN;
- default:
- netdev_dbg(netdev, "%s: Invalid string set", __func__);
- return -EOPNOTSUPP;
- }
-}
-
-
-/* edma_get_strings()
- * get stats string
- */
-static void edma_get_strings(struct net_device *netdev, uint32_t stringset,
- uint8_t *data)
-{
- uint8_t *p = data;
- uint32_t i;
-
- switch (stringset) {
- case ETH_SS_STATS:
- for (i = 0; i < EDMA_STATS_LEN; i++) {
- memcpy(p, edma_gstrings_stats[i].stat_string,
- min((size_t)ETH_GSTRING_LEN,
- strlen(edma_gstrings_stats[i].stat_string)
- + 1));
- p += ETH_GSTRING_LEN;
- }
- break;
- }
-}
-
-/* edma_get_ethtool_stats()
- * Get ethtool statistics
- */
-static void edma_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats, uint64_t *data)
-{
- struct edma_adapter *adapter = netdev_priv(netdev);
- struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
- int i;
- uint8_t *p = NULL;
-
- edma_read_append_stats(edma_cinfo);
-
- for(i = 0; i < EDMA_STATS_LEN; i++) {
- p = (uint8_t *)&(edma_cinfo->edma_ethstats) +
- edma_gstrings_stats[i].stat_offset;
- data[i] = *(uint32_t *)p;
- }
-}
-
-/* edma_get_drvinfo()
- * get edma driver info
- */
-static void edma_get_drvinfo(struct net_device *dev,
- struct ethtool_drvinfo *info)
-{
- strlcpy(info->driver, "ess_edma", DRVINFO_LEN);
- strlcpy(info->bus_info, "axi", ETHTOOL_BUSINFO_LEN);
-}
-
-/* edma_nway_reset()
- * Reset the phy, if available.
- */
-static int edma_nway_reset(struct net_device *netdev)
-{
- return -EINVAL;
-}
-
-/* edma_get_wol()
- * get wake on lan info
- */
-static void edma_get_wol(struct net_device *netdev,
- struct ethtool_wolinfo *wol)
-{
- wol->supported = 0;
- wol->wolopts = 0;
-}
-
-/* edma_get_msglevel()
- * get message level.
- */
-static uint32_t edma_get_msglevel(struct net_device *netdev)
-{
- return 0;
-}
-
-/* edma_get_settings()
- * Get edma settings
- */
-static int edma_get_settings(struct net_device *netdev,
- struct ethtool_link_ksettings *cmd)
-{
- struct edma_adapter *adapter = netdev_priv(netdev);
-
- if (adapter->poll_required) {
- if ((adapter->forced_speed != SPEED_UNKNOWN)
- && !(adapter->poll_required))
- return -EPERM;
-
- phy_ethtool_ksettings_get(adapter->phydev, cmd);
- if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, adapter->phydev->advertising))
- cmd->base.port = PORT_FIBRE;
- else
- cmd->base.port = PORT_TP;
- } else {
- /* If the speed/duplex for this GMAC is forced and we
- * are not polling for link state changes, return the
- * values as specified by platform. This will be true
- * for GMACs connected to switch, and interfaces that
- * do not use a PHY.
- */
- if (!(adapter->poll_required)) {
- if (adapter->forced_speed != SPEED_UNKNOWN) {
- /* set speed and duplex */
- cmd->base.speed = SPEED_1000;
- cmd->base.duplex = DUPLEX_FULL;
-
- /* Populate capabilities advertised by self */
- linkmode_zero(cmd->link_modes.advertising);
- cmd->base.autoneg = 0;
- cmd->base.port = PORT_TP;
- cmd->base.transceiver = XCVR_EXTERNAL;
- } else {
- /* non link polled and non
- * forced speed/duplex interface
- */
- return -EIO;
- }
- }
- }
-
- return 0;
-}
-
-/* edma_set_settings()
- * Set EDMA settings
- */
-static int edma_set_settings(struct net_device *netdev,
- const struct ethtool_link_ksettings *cmd)
-{
- struct edma_adapter *adapter = netdev_priv(netdev);
-
- if ((adapter->forced_speed != SPEED_UNKNOWN) &&
- !adapter->poll_required)
- return -EPERM;
-
- return phy_ethtool_ksettings_set(adapter->phydev, cmd);
-}
-
-/* edma_get_coalesce
- * get interrupt mitigation
- */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,15,0)
-static int edma_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec,
- struct kernel_ethtool_coalesce *kernel_coal,
- struct netlink_ext_ack *extack)
-#else
-static int edma_get_coalesce(struct net_device *netdev,
- struct ethtool_coalesce *ec)
-#endif
-{
- u32 reg_val;
-
- edma_get_tx_rx_coalesce(®_val);
-
- /* We read the Interrupt Moderation Timer(IMT) register value,
- * use lower 16 bit for rx and higher 16 bit for Tx. We do a
- * left shift by 1, because IMT resolution timer is 2usecs.
- * Hence the value given by the register is multiplied by 2 to
- * get the actual time in usecs.
- */
- ec->tx_coalesce_usecs = (((reg_val >> 16) & 0xffff) << 1);
- ec->rx_coalesce_usecs = ((reg_val & 0xffff) << 1);
-
- return 0;
-}
-
-/* edma_set_coalesce
- * set interrupt mitigation
- */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,15,0)
-static int edma_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec,
- struct kernel_ethtool_coalesce *kernel_coal,
- struct netlink_ext_ack *extack)
-#else
-static int edma_set_coalesce(struct net_device *netdev,
- struct ethtool_coalesce *ec)
-#endif
-{
- if (ec->tx_coalesce_usecs)
- edma_change_tx_coalesce(ec->tx_coalesce_usecs);
- if (ec->rx_coalesce_usecs)
- edma_change_rx_coalesce(ec->rx_coalesce_usecs);
-
- return 0;
-}
-
-/* edma_set_priv_flags()
- * Set EDMA private flags
- */
-static int edma_set_priv_flags(struct net_device *netdev, u32 flags)
-{
- return 0;
-}
-
-/* edma_get_priv_flags()
- * get edma driver flags
- */
-static u32 edma_get_priv_flags(struct net_device *netdev)
-{
- return 0;
-}
-
-/* edma_get_ringparam()
- * get ring size
- */
-static void edma_get_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct edma_adapter *adapter = netdev_priv(netdev);
- struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
-
- ring->tx_max_pending = edma_cinfo->tx_ring_count;
- ring->rx_max_pending = edma_cinfo->rx_ring_count;
-}
-
-/* Ethtool operations
- */
-static const struct ethtool_ops edma_ethtool_ops = {
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,7,0)
- .supported_coalesce_params = ETHTOOL_COALESCE_USECS,
-#endif
- .get_drvinfo = &edma_get_drvinfo,
- .get_link = ðtool_op_get_link,
- .get_msglevel = &edma_get_msglevel,
- .nway_reset = &edma_nway_reset,
- .get_wol = &edma_get_wol,
- .get_link_ksettings = &edma_get_settings,
- .set_link_ksettings = &edma_set_settings,
- .get_strings = &edma_get_strings,
- .get_sset_count = &edma_get_strset_count,
- .get_ethtool_stats = &edma_get_ethtool_stats,
- .get_coalesce = &edma_get_coalesce,
- .set_coalesce = &edma_set_coalesce,
- .get_priv_flags = edma_get_priv_flags,
- .set_priv_flags = edma_set_priv_flags,
- .get_ringparam = edma_get_ringparam,
-};
-
-/* edma_set_ethtool_ops
- * Set ethtool operations
- */
-void edma_set_ethtool_ops(struct net_device *netdev)
-{
- netdev->ethtool_ops = &edma_ethtool_ops;
-}
diff --git a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/ess_edma.h b/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/ess_edma.h
deleted file mode 100644
index 021be98a38..0000000000
--- a/target/linux/ipq40xx/files/drivers/net/ethernet/qualcomm/essedma/ess_edma.h
+++ /dev/null
@@ -1,389 +0,0 @@
-/*
- * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for
- * any purpose with or without fee is hereby granted, provided that the
- * above copyright notice and this permission notice appear in all copies.
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
- * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _ESS_EDMA_H_
-#define _ESS_EDMA_H_
-
-#include <linux/types.h>
-
-struct edma_adapter;
-struct edma_hw;
-
-/* register definition */
-#define EDMA_REG_MAS_CTRL 0x0
-#define EDMA_REG_TIMEOUT_CTRL 0x004
-#define EDMA_REG_DBG0 0x008
-#define EDMA_REG_DBG1 0x00C
-#define EDMA_REG_SW_CTRL0 0x100
-#define EDMA_REG_SW_CTRL1 0x104
-
-/* Interrupt Status Register */
-#define EDMA_REG_RX_ISR 0x200
-#define EDMA_REG_TX_ISR 0x208
-#define EDMA_REG_MISC_ISR 0x210
-#define EDMA_REG_WOL_ISR 0x218
-
-#define EDMA_MISC_ISR_RX_URG_Q(x) (1 << x)
-
-#define EDMA_MISC_ISR_AXIR_TIMEOUT 0x00000100
-#define EDMA_MISC_ISR_AXIR_ERR 0x00000200
-#define EDMA_MISC_ISR_TXF_DEAD 0x00000400
-#define EDMA_MISC_ISR_AXIW_ERR 0x00000800
-#define EDMA_MISC_ISR_AXIW_TIMEOUT 0x00001000
-
-#define EDMA_WOL_ISR 0x00000001
-
-/* Interrupt Mask Register */
-#define EDMA_REG_MISC_IMR 0x214
-#define EDMA_REG_WOL_IMR 0x218
-
-#define EDMA_RX_IMR_NORMAL_MASK 0x1
-#define EDMA_TX_IMR_NORMAL_MASK 0x1
-#define EDMA_MISC_IMR_NORMAL_MASK 0x80001FFF
-#define EDMA_WOL_IMR_NORMAL_MASK 0x1
-
-/* Edma receive consumer index */
-#define EDMA_REG_RX_SW_CONS_IDX_Q(x) (0x220 + ((x) << 2)) /* x is the queue id */
-/* Edma transmit consumer index */
-#define EDMA_REG_TX_SW_CONS_IDX_Q(x) (0x240 + ((x) << 2)) /* x is the queue id */
-
-/* IRQ Moderator Initial Timer Register */
-#define EDMA_REG_IRQ_MODRT_TIMER_INIT 0x280
-#define EDMA_IRQ_MODRT_TIMER_MASK 0xFFFF
-#define EDMA_IRQ_MODRT_RX_TIMER_SHIFT 0
-#define EDMA_IRQ_MODRT_TX_TIMER_SHIFT 16
-
-/* Interrupt Control Register */
-#define EDMA_REG_INTR_CTRL 0x284
-#define EDMA_INTR_CLR_TYP_SHIFT 0
-#define EDMA_INTR_SW_IDX_W_TYP_SHIFT 1
-#define EDMA_INTR_CLEAR_TYPE_W1 0
-#define EDMA_INTR_CLEAR_TYPE_R 1
-
-/* RX Interrupt Mask Register */
-#define EDMA_REG_RX_INT_MASK_Q(x) (0x300 + ((x) << 2)) /* x = queue id */
-
-/* TX Interrupt mask register */
-#define EDMA_REG_TX_INT_MASK_Q(x) (0x340 + ((x) << 2)) /* x = queue id */
-
-/* Load Ptr Register
- * Software sets this bit after the initialization of the head and tail
- */
-#define EDMA_REG_TX_SRAM_PART 0x400
-#define EDMA_LOAD_PTR_SHIFT 16
-
-/* TXQ Control Register */
-#define EDMA_REG_TXQ_CTRL 0x404
-#define EDMA_TXQ_CTRL_IP_OPTION_EN 0x10
-#define EDMA_TXQ_CTRL_TXQ_EN 0x20
-#define EDMA_TXQ_CTRL_ENH_MODE 0x40
-#define EDMA_TXQ_CTRL_LS_8023_EN 0x80
-#define EDMA_TXQ_CTRL_TPD_BURST_EN 0x100
-#define EDMA_TXQ_CTRL_LSO_BREAK_EN 0x200
-#define EDMA_TXQ_NUM_TPD_BURST_MASK 0xF
-#define EDMA_TXQ_TXF_BURST_NUM_MASK 0xFFFF
-#define EDMA_TXQ_NUM_TPD_BURST_SHIFT 0
-#define EDMA_TXQ_TXF_BURST_NUM_SHIFT 16
-
-#define EDMA_REG_TXF_WATER_MARK 0x408 /* In 8-bytes */
-#define EDMA_TXF_WATER_MARK_MASK 0x0FFF
-#define EDMA_TXF_LOW_WATER_MARK_SHIFT 0
-#define EDMA_TXF_HIGH_WATER_MARK_SHIFT 16
-#define EDMA_TXQ_CTRL_BURST_MODE_EN 0x80000000
-
-/* WRR Control Register */
-#define EDMA_REG_WRR_CTRL_Q0_Q3 0x40c
-#define EDMA_REG_WRR_CTRL_Q4_Q7 0x410
-#define EDMA_REG_WRR_CTRL_Q8_Q11 0x414
-#define EDMA_REG_WRR_CTRL_Q12_Q15 0x418
-
-/* Weight round robin(WRR), it takes queue as input, and computes
- * starting bits where we need to write the weight for a particular
- * queue
- */
-#define EDMA_WRR_SHIFT(x) (((x) * 5) % 20)
-
-/* Tx Descriptor Control Register */
-#define EDMA_REG_TPD_RING_SIZE 0x41C
-#define EDMA_TPD_RING_SIZE_SHIFT 0
-#define EDMA_TPD_RING_SIZE_MASK 0xFFFF
-
-/* Transmit descriptor base address */
-#define EDMA_REG_TPD_BASE_ADDR_Q(x) (0x420 + ((x) << 2)) /* x = queue id */
-
-/* TPD Index Register */
-#define EDMA_REG_TPD_IDX_Q(x) (0x460 + ((x) << 2)) /* x = queue id */
-
-#define EDMA_TPD_PROD_IDX_BITS 0x0000FFFF
-#define EDMA_TPD_CONS_IDX_BITS 0xFFFF0000
-#define EDMA_TPD_PROD_IDX_MASK 0xFFFF
-#define EDMA_TPD_CONS_IDX_MASK 0xFFFF
-#define EDMA_TPD_PROD_IDX_SHIFT 0
-#define EDMA_TPD_CONS_IDX_SHIFT 16
-
-/* TX Virtual Queue Mapping Control Register */
-#define EDMA_REG_VQ_CTRL0 0x4A0
-#define EDMA_REG_VQ_CTRL1 0x4A4
-
-/* Virtual QID shift, it takes queue as input, and computes
- * Virtual QID position in virtual qid control register
- */
-#define EDMA_VQ_ID_SHIFT(i) (((i) * 3) % 24)
-
-/* Virtual Queue Default Value */
-#define EDMA_VQ_REG_VALUE 0x240240
-
-/* Tx side Port Interface Control Register */
-#define EDMA_REG_PORT_CTRL 0x4A8
-#define EDMA_PAD_EN_SHIFT 15
-
-/* Tx side VLAN Configuration Register */
-#define EDMA_REG_VLAN_CFG 0x4AC
-
-#define EDMA_TX_CVLAN 16
-#define EDMA_TX_INS_CVLAN 17
-#define EDMA_TX_CVLAN_TAG_SHIFT 0
-
-#define EDMA_TX_SVLAN 14
-#define EDMA_TX_INS_SVLAN 15
-#define EDMA_TX_SVLAN_TAG_SHIFT 16
-
-/* Tx Queue Packet Statistic Register */
-#define EDMA_REG_TX_STAT_PKT_Q(x) (0x700 + ((x) << 3)) /* x = queue id */
-
-#define EDMA_TX_STAT_PKT_MASK 0xFFFFFF
-
-/* Tx Queue Byte Statistic Register */
-#define EDMA_REG_TX_STAT_BYTE_Q(x) (0x704 + ((x) << 3)) /* x = queue id */
-
-/* Load Balance Based Ring Offset Register */
-#define EDMA_REG_LB_RING 0x800
-#define EDMA_LB_RING_ENTRY_MASK 0xff
-#define EDMA_LB_RING_ID_MASK 0x7
-#define EDMA_LB_RING_PROFILE_ID_MASK 0x3
-#define EDMA_LB_RING_ENTRY_BIT_OFFSET 8
-#define EDMA_LB_RING_ID_OFFSET 0
-#define EDMA_LB_RING_PROFILE_ID_OFFSET 3
-#define EDMA_LB_REG_VALUE 0x6040200
-
-/* Load Balance Priority Mapping Register */
-#define EDMA_REG_LB_PRI_START 0x804
-#define EDMA_REG_LB_PRI_END 0x810
-#define EDMA_LB_PRI_REG_INC 4
-#define EDMA_LB_PRI_ENTRY_BIT_OFFSET 4
-#define EDMA_LB_PRI_ENTRY_MASK 0xf
-
-/* RSS Priority Mapping Register */
-#define EDMA_REG_RSS_PRI 0x820
-#define EDMA_RSS_PRI_ENTRY_MASK 0xf
-#define EDMA_RSS_RING_ID_MASK 0x7
-#define EDMA_RSS_PRI_ENTRY_BIT_OFFSET 4
-
-/* RSS Indirection Register */
-#define EDMA_REG_RSS_IDT(x) (0x840 + ((x) << 2)) /* x = No. of indirection table */
-#define EDMA_NUM_IDT 16
-#define EDMA_RSS_IDT_VALUE 0x64206420
-
-/* Default RSS Ring Register */
-#define EDMA_REG_DEF_RSS 0x890
-#define EDMA_DEF_RSS_MASK 0x7
-
-/* RSS Hash Function Type Register */
-#define EDMA_REG_RSS_TYPE 0x894
-#define EDMA_RSS_TYPE_NONE 0x01
-#define EDMA_RSS_TYPE_IPV4TCP 0x02
-#define EDMA_RSS_TYPE_IPV6_TCP 0x04
-#define EDMA_RSS_TYPE_IPV4_UDP 0x08
-#define EDMA_RSS_TYPE_IPV6UDP 0x10
-#define EDMA_RSS_TYPE_IPV4 0x20
-#define EDMA_RSS_TYPE_IPV6 0x40
-#define EDMA_RSS_HASH_MODE_MASK 0x7f
-
-#define EDMA_REG_RSS_HASH_VALUE 0x8C0
-
-#define EDMA_REG_RSS_TYPE_RESULT 0x8C4
-
-#define EDMA_HASH_TYPE_START 0
-#define EDMA_HASH_TYPE_END 5
-#define EDMA_HASH_TYPE_SHIFT 12
-
-#define EDMA_RFS_FLOW_ENTRIES 1024
-#define EDMA_RFS_FLOW_ENTRIES_MASK (EDMA_RFS_FLOW_ENTRIES - 1)
-#define EDMA_RFS_EXPIRE_COUNT_PER_CALL 128
-
-/* RFD Base Address Register */
-#define EDMA_REG_RFD_BASE_ADDR_Q(x) (0x950 + ((x) << 2)) /* x = queue id */
-
-/* RFD Index Register */
-#define EDMA_REG_RFD_IDX_Q(x) (0x9B0 + ((x) << 2))
-
-#define EDMA_RFD_PROD_IDX_BITS 0x00000FFF
-#define EDMA_RFD_CONS_IDX_BITS 0x0FFF0000
-#define EDMA_RFD_PROD_IDX_MASK 0xFFF
-#define EDMA_RFD_CONS_IDX_MASK 0xFFF
-#define EDMA_RFD_PROD_IDX_SHIFT 0
-#define EDMA_RFD_CONS_IDX_SHIFT 16
-
-/* Rx Descriptor Control Register */
-#define EDMA_REG_RX_DESC0 0xA10
-#define EDMA_RFD_RING_SIZE_MASK 0xFFF
-#define EDMA_RX_BUF_SIZE_MASK 0xFFFF
-#define EDMA_RFD_RING_SIZE_SHIFT 0
-#define EDMA_RX_BUF_SIZE_SHIFT 16
-
-#define EDMA_REG_RX_DESC1 0xA14
-#define EDMA_RXQ_RFD_BURST_NUM_MASK 0x3F
-#define EDMA_RXQ_RFD_PF_THRESH_MASK 0x1F
-#define EDMA_RXQ_RFD_LOW_THRESH_MASK 0xFFF
-#define EDMA_RXQ_RFD_BURST_NUM_SHIFT 0
-#define EDMA_RXQ_RFD_PF_THRESH_SHIFT 8
-#define EDMA_RXQ_RFD_LOW_THRESH_SHIFT 16
-
-/* RXQ Control Register */
-#define EDMA_REG_RXQ_CTRL 0xA18
-#define EDMA_FIFO_THRESH_TYPE_SHIF 0
-#define EDMA_FIFO_THRESH_128_BYTE 0x0
-#define EDMA_FIFO_THRESH_64_BYTE 0x1
-#define EDMA_RXQ_CTRL_RMV_VLAN 0x00000002
-#define EDMA_RXQ_CTRL_EN 0x0000FF00
-
-/* AXI Burst Size Config */
-#define EDMA_REG_AXIW_CTRL_MAXWRSIZE 0xA1C
-#define EDMA_AXIW_MAXWRSIZE_VALUE 0x0
-
-/* Rx Statistics Register */
-#define EDMA_REG_RX_STAT_BYTE_Q(x) (0xA30 + ((x) << 2)) /* x = queue id */
-#define EDMA_REG_RX_STAT_PKT_Q(x) (0xA50 + ((x) << 2)) /* x = queue id */
-
-/* WoL Pattern Length Register */
-#define EDMA_REG_WOL_PATTERN_LEN0 0xC00
-#define EDMA_WOL_PT_LEN_MASK 0xFF
-#define EDMA_WOL_PT0_LEN_SHIFT 0
-#define EDMA_WOL_PT1_LEN_SHIFT 8
-#define EDMA_WOL_PT2_LEN_SHIFT 16
-#define EDMA_WOL_PT3_LEN_SHIFT 24
-
-#define EDMA_REG_WOL_PATTERN_LEN1 0xC04
-#define EDMA_WOL_PT4_LEN_SHIFT 0
-#define EDMA_WOL_PT5_LEN_SHIFT 8
-#define EDMA_WOL_PT6_LEN_SHIFT 16
-
-/* WoL Control Register */
-#define EDMA_REG_WOL_CTRL 0xC08
-#define EDMA_WOL_WK_EN 0x00000001
-#define EDMA_WOL_MG_EN 0x00000002
-#define EDMA_WOL_PT0_EN 0x00000004
-#define EDMA_WOL_PT1_EN 0x00000008
-#define EDMA_WOL_PT2_EN 0x00000010
-#define EDMA_WOL_PT3_EN 0x00000020
-#define EDMA_WOL_PT4_EN 0x00000040
-#define EDMA_WOL_PT5_EN 0x00000080
-#define EDMA_WOL_PT6_EN 0x00000100
-
-/* MAC Control Register */
-#define EDMA_REG_MAC_CTRL0 0xC20
-#define EDMA_REG_MAC_CTRL1 0xC24
-
-/* WoL Pattern Register */
-#define EDMA_REG_WOL_PATTERN_START 0x5000
-#define EDMA_PATTERN_PART_REG_OFFSET 0x40
-
-
-/* TX descriptor fields */
-#define EDMA_TPD_HDR_SHIFT 0
-#define EDMA_TPD_PPPOE_EN 0x00000100
-#define EDMA_TPD_IP_CSUM_EN 0x00000200
-#define EDMA_TPD_TCP_CSUM_EN 0x0000400
-#define EDMA_TPD_UDP_CSUM_EN 0x00000800
-#define EDMA_TPD_CUSTOM_CSUM_EN 0x00000C00
-#define EDMA_TPD_LSO_EN 0x00001000
-#define EDMA_TPD_LSO_V2_EN 0x00002000
-#define EDMA_TPD_IPV4_EN 0x00010000
-#define EDMA_TPD_MSS_MASK 0x1FFF
-#define EDMA_TPD_MSS_SHIFT 18
-#define EDMA_TPD_CUSTOM_CSUM_SHIFT 18
-
-/* RRD descriptor fields */
-#define EDMA_RRD_NUM_RFD_MASK 0x000F
-#define EDMA_RRD_SVLAN 0x8000
-#define EDMA_RRD_FLOW_COOKIE_MASK 0x07FF;
-
-#define EDMA_RRD_PKT_SIZE_MASK 0x3FFF
-#define EDMA_RRD_CSUM_FAIL_MASK 0xC000
-#define EDMA_RRD_CVLAN 0x0001
-#define EDMA_RRD_DESC_VALID 0x8000
-
-#define EDMA_RRD_PRIORITY_SHIFT 4
-#define EDMA_RRD_PRIORITY_MASK 0x7
-#define EDMA_RRD_PORT_TYPE_SHIFT 7
-#define EDMA_RRD_PORT_TYPE_MASK 0x1F
-
-#define ESS_RGMII_CTRL 0x0004
-
-/* Port status registers */
-#define ESS_PORT0_STATUS 0x007C
-#define ESS_PORT1_STATUS 0x0080
-#define ESS_PORT2_STATUS 0x0084
-#define ESS_PORT3_STATUS 0x0088
-#define ESS_PORT4_STATUS 0x008C
-#define ESS_PORT5_STATUS 0x0090
-
-#define ESS_PORT_STATUS_HDX_FLOW_CTL 0x80
-#define ESS_PORT_STATUS_DUPLEX_MODE 0x40
-#define ESS_PORT_STATUS_RX_FLOW_EN 0x20
-#define ESS_PORT_STATUS_TX_FLOW_EN 0x10
-#define ESS_PORT_STATUS_RX_MAC_EN 0x08
-#define ESS_PORT_STATUS_TX_MAC_EN 0x04
-#define ESS_PORT_STATUS_SPEED_INV 0x03
-#define ESS_PORT_STATUS_SPEED_1000 0x02
-#define ESS_PORT_STATUS_SPEED_100 0x01
-#define ESS_PORT_STATUS_SPEED_10 0x00
-
-#define ESS_PORT_1G_FDX (ESS_PORT_STATUS_DUPLEX_MODE | ESS_PORT_STATUS_RX_FLOW_EN | \
- ESS_PORT_STATUS_TX_FLOW_EN | ESS_PORT_STATUS_RX_MAC_EN | \
- ESS_PORT_STATUS_TX_MAC_EN | ESS_PORT_STATUS_SPEED_1000)
-
-#define PHY_STATUS_REG 0x11
-#define PHY_STATUS_SPEED 0xC000
-#define PHY_STATUS_SPEED_SHIFT 14
-#define PHY_STATUS_DUPLEX 0x2000
-#define PHY_STATUS_DUPLEX_SHIFT 13
-#define PHY_STATUS_SPEED_DUPLEX_RESOLVED 0x0800
-#define PHY_STATUS_CARRIER 0x0400
-#define PHY_STATUS_CARRIER_SHIFT 10
-
-/* Port lookup control registers */
-#define ESS_PORT0_LOOKUP_CTRL 0x0660
-#define ESS_PORT1_LOOKUP_CTRL 0x066C
-#define ESS_PORT2_LOOKUP_CTRL 0x0678
-#define ESS_PORT3_LOOKUP_CTRL 0x0684
-#define ESS_PORT4_LOOKUP_CTRL 0x0690
-#define ESS_PORT5_LOOKUP_CTRL 0x069C
-
-#define ESS_PORT0_HEADER_CTRL 0x009C
-
-#define ESS_PORTS_ALL 0x3f
-
-#define ESS_FWD_CTRL1 0x0624
-#define ESS_FWD_CTRL1_UC_FLOOD BITS(0, 7)
-#define ESS_FWD_CTRL1_UC_FLOOD_S 0
-#define ESS_FWD_CTRL1_MC_FLOOD BITS(8, 7)
-#define ESS_FWD_CTRL1_MC_FLOOD_S 8
-#define ESS_FWD_CTRL1_BC_FLOOD BITS(16, 7)
-#define ESS_FWD_CTRL1_BC_FLOOD_S 16
-#define ESS_FWD_CTRL1_IGMP BITS(24, 7)
-#define ESS_FWD_CTRL1_IGMP_S 24
-
-#endif /* _ESS_EDMA_H_ */
diff --git a/target/linux/ipq40xx/files/drivers/net/mdio/ar40xx.c b/target/linux/ipq40xx/files/drivers/net/mdio/ar40xx.c
deleted file mode 100644
index d5ef7af151..0000000000
--- a/target/linux/ipq40xx/files/drivers/net/mdio/ar40xx.c
+++ /dev/null
@@ -1,1893 +0,0 @@
-/*
- * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for
- * any purpose with or without fee is hereby granted, provided that the
- * above copyright notice and this permission notice appear in all copies.
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
- * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/bitfield.h>
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/bitops.h>
-#include <linux/switch.h>
-#include <linux/delay.h>
-#include <linux/phy.h>
-#include <linux/clk.h>
-#include <linux/reset.h>
-#include <linux/lockdep.h>
-#include <linux/workqueue.h>
-#include <linux/of_device.h>
-#include <linux/of_address.h>
-#include <linux/of_mdio.h>
-#include <linux/mdio.h>
-#include <linux/gpio.h>
-
-#include "ar40xx.h"
-
-static struct ar40xx_priv *ar40xx_priv;
-
-#define MIB_DESC(_s , _o, _n) \
- { \
- .size = (_s), \
- .offset = (_o), \
- .name = (_n), \
- }
-
-static const struct ar40xx_mib_desc ar40xx_mibs[] = {
- MIB_DESC(1, AR40XX_STATS_RXBROAD, "RxBroad"),
- MIB_DESC(1, AR40XX_STATS_RXPAUSE, "RxPause"),
- MIB_DESC(1, AR40XX_STATS_RXMULTI, "RxMulti"),
- MIB_DESC(1, AR40XX_STATS_RXFCSERR, "RxFcsErr"),
- MIB_DESC(1, AR40XX_STATS_RXALIGNERR, "RxAlignErr"),
- MIB_DESC(1, AR40XX_STATS_RXRUNT, "RxRunt"),
- MIB_DESC(1, AR40XX_STATS_RXFRAGMENT, "RxFragment"),
- MIB_DESC(1, AR40XX_STATS_RX64BYTE, "Rx64Byte"),
- MIB_DESC(1, AR40XX_STATS_RX128BYTE, "Rx128Byte"),
- MIB_DESC(1, AR40XX_STATS_RX256BYTE, "Rx256Byte"),
- MIB_DESC(1, AR40XX_STATS_RX512BYTE, "Rx512Byte"),
- MIB_DESC(1, AR40XX_STATS_RX1024BYTE, "Rx1024Byte"),
- MIB_DESC(1, AR40XX_STATS_RX1518BYTE, "Rx1518Byte"),
- MIB_DESC(1, AR40XX_STATS_RXMAXBYTE, "RxMaxByte"),
- MIB_DESC(1, AR40XX_STATS_RXTOOLONG, "RxTooLong"),
- MIB_DESC(2, AR40XX_STATS_RXGOODBYTE, "RxGoodByte"),
- MIB_DESC(2, AR40XX_STATS_RXBADBYTE, "RxBadByte"),
- MIB_DESC(1, AR40XX_STATS_RXOVERFLOW, "RxOverFlow"),
- MIB_DESC(1, AR40XX_STATS_FILTERED, "Filtered"),
- MIB_DESC(1, AR40XX_STATS_TXBROAD, "TxBroad"),
- MIB_DESC(1, AR40XX_STATS_TXPAUSE, "TxPause"),
- MIB_DESC(1, AR40XX_STATS_TXMULTI, "TxMulti"),
- MIB_DESC(1, AR40XX_STATS_TXUNDERRUN, "TxUnderRun"),
- MIB_DESC(1, AR40XX_STATS_TX64BYTE, "Tx64Byte"),
- MIB_DESC(1, AR40XX_STATS_TX128BYTE, "Tx128Byte"),
- MIB_DESC(1, AR40XX_STATS_TX256BYTE, "Tx256Byte"),
- MIB_DESC(1, AR40XX_STATS_TX512BYTE, "Tx512Byte"),
- MIB_DESC(1, AR40XX_STATS_TX1024BYTE, "Tx1024Byte"),
- MIB_DESC(1, AR40XX_STATS_TX1518BYTE, "Tx1518Byte"),
- MIB_DESC(1, AR40XX_STATS_TXMAXBYTE, "TxMaxByte"),
- MIB_DESC(1, AR40XX_STATS_TXOVERSIZE, "TxOverSize"),
- MIB_DESC(2, AR40XX_STATS_TXBYTE, "TxByte"),
- MIB_DESC(1, AR40XX_STATS_TXCOLLISION, "TxCollision"),
- MIB_DESC(1, AR40XX_STATS_TXABORTCOL, "TxAbortCol"),
- MIB_DESC(1, AR40XX_STATS_TXMULTICOL, "TxMultiCol"),
- MIB_DESC(1, AR40XX_STATS_TXSINGLECOL, "TxSingleCol"),
- MIB_DESC(1, AR40XX_STATS_TXEXCDEFER, "TxExcDefer"),
- MIB_DESC(1, AR40XX_STATS_TXDEFER, "TxDefer"),
- MIB_DESC(1, AR40XX_STATS_TXLATECOL, "TxLateCol"),
-};
-
-static u32
-ar40xx_read(struct ar40xx_priv *priv, int reg)
-{
- return readl(priv->hw_addr + reg);
-}
-
-static u32
-ar40xx_psgmii_read(struct ar40xx_priv *priv, int reg)
-{
- return readl(priv->psgmii_hw_addr + reg);
-}
-
-static void
-ar40xx_write(struct ar40xx_priv *priv, int reg, u32 val)
-{
- writel(val, priv->hw_addr + reg);
-}
-
-static u32
-ar40xx_rmw(struct ar40xx_priv *priv, int reg, u32 mask, u32 val)
-{
- u32 ret;
-
- ret = ar40xx_read(priv, reg);
- ret &= ~mask;
- ret |= val;
- ar40xx_write(priv, reg, ret);
- return ret;
-}
-
-static void
-ar40xx_psgmii_write(struct ar40xx_priv *priv, int reg, u32 val)
-{
- writel(val, priv->psgmii_hw_addr + reg);
-}
-
-static void
-ar40xx_phy_dbg_write(struct ar40xx_priv *priv, int phy_addr,
- u16 dbg_addr, u16 dbg_data)
-{
- struct mii_bus *bus = priv->mii_bus;
-
- mutex_lock(&bus->mdio_lock);
- bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_ADDR, dbg_addr);
- bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_DATA, dbg_data);
- mutex_unlock(&bus->mdio_lock);
-}
-
-static void
-ar40xx_phy_dbg_read(struct ar40xx_priv *priv, int phy_addr,
- u16 dbg_addr, u16 *dbg_data)
-{
- struct mii_bus *bus = priv->mii_bus;
-
- mutex_lock(&bus->mdio_lock);
- bus->write(bus, phy_addr, AR40XX_MII_ATH_DBG_ADDR, dbg_addr);
- *dbg_data = bus->read(bus, phy_addr, AR40XX_MII_ATH_DBG_DATA);
- mutex_unlock(&bus->mdio_lock);
-}
-
-static void
-ar40xx_phy_mmd_write(struct ar40xx_priv *priv, u32 phy_id,
- u16 mmd_num, u16 reg_id, u16 reg_val)
-{
- struct mii_bus *bus = priv->mii_bus;
-
- mutex_lock(&bus->mdio_lock);
- bus->write(bus, phy_id,
- AR40XX_MII_ATH_MMD_ADDR, mmd_num);
- bus->write(bus, phy_id,
- AR40XX_MII_ATH_MMD_DATA, reg_id);
- bus->write(bus, phy_id,
- AR40XX_MII_ATH_MMD_ADDR,
- 0x4000 | mmd_num);
- bus->write(bus, phy_id,
- AR40XX_MII_ATH_MMD_DATA, reg_val);
- mutex_unlock(&bus->mdio_lock);
-}
-
-static u16
-ar40xx_phy_mmd_read(struct ar40xx_priv *priv, u32 phy_id,
- u16 mmd_num, u16 reg_id)
-{
- u16 value;
- struct mii_bus *bus = priv->mii_bus;
-
- mutex_lock(&bus->mdio_lock);
- bus->write(bus, phy_id,
- AR40XX_MII_ATH_MMD_ADDR, mmd_num);
- bus->write(bus, phy_id,
- AR40XX_MII_ATH_MMD_DATA, reg_id);
- bus->write(bus, phy_id,
- AR40XX_MII_ATH_MMD_ADDR,
- 0x4000 | mmd_num);
- value = bus->read(bus, phy_id, AR40XX_MII_ATH_MMD_DATA);
- mutex_unlock(&bus->mdio_lock);
- return value;
-}
-
-/* Start of swconfig support */
-
-static void
-ar40xx_phy_poll_reset(struct ar40xx_priv *priv)
-{
- u32 i, in_reset, retries = 500;
- struct mii_bus *bus = priv->mii_bus;
-
- /* Assume RESET was recently issued to some or all of the phys */
- in_reset = GENMASK(AR40XX_NUM_PHYS - 1, 0);
-
- while (retries--) {
- /* 1ms should be plenty of time.
- * 802.3 spec allows for a max wait time of 500ms
- */
- usleep_range(1000, 2000);
-
- for (i = 0; i < AR40XX_NUM_PHYS; i++) {
- int val;
-
- /* skip devices which have completed reset */
- if (!(in_reset & BIT(i)))
- continue;
-
- val = mdiobus_read(bus, i, MII_BMCR);
- if (val < 0)
- continue;
-
- /* mark when phy is no longer in reset state */
- if (!(val & BMCR_RESET))
- in_reset &= ~BIT(i);
- }
-
- if (!in_reset)
- return;
- }
-
- dev_warn(&bus->dev, "Failed to reset all phys! (in_reset: 0x%x)\n",
- in_reset);
-}
-
-static void
-ar40xx_phy_init(struct ar40xx_priv *priv)
-{
- int i;
- struct mii_bus *bus;
- u16 val;
-
- bus = priv->mii_bus;
- for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) {
- ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_0, &val);
- val &= ~AR40XX_PHY_MANU_CTRL_EN;
- ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_0, val);
- mdiobus_write(bus, i,
- MII_ADVERTISE, ADVERTISE_ALL |
- ADVERTISE_PAUSE_CAP |
- ADVERTISE_PAUSE_ASYM);
- mdiobus_write(bus, i, MII_CTRL1000, ADVERTISE_1000FULL);
- mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
- }
-
- ar40xx_phy_poll_reset(priv);
-}
-
-static void
-ar40xx_port_phy_linkdown(struct ar40xx_priv *priv)
-{
- struct mii_bus *bus;
- int i;
- u16 val;
-
- bus = priv->mii_bus;
- for (i = 0; i < AR40XX_NUM_PORTS - 1; i++) {
- mdiobus_write(bus, i, MII_CTRL1000, 0);
- mdiobus_write(bus, i, MII_ADVERTISE, 0);
- mdiobus_write(bus, i, MII_BMCR, BMCR_RESET | BMCR_ANENABLE);
- ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_0, &val);
- val |= AR40XX_PHY_MANU_CTRL_EN;
- ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_0, val);
- /* disable transmit */
- ar40xx_phy_dbg_read(priv, i, AR40XX_PHY_DEBUG_2, &val);
- val &= 0xf00f;
- ar40xx_phy_dbg_write(priv, i, AR40XX_PHY_DEBUG_2, val);
- }
-}
-
-static void
-ar40xx_set_mirror_regs(struct ar40xx_priv *priv)
-{
- int port;
-
- /* reset all mirror registers */
- ar40xx_rmw(priv, AR40XX_REG_FWD_CTRL0,
- AR40XX_FWD_CTRL0_MIRROR_PORT,
- (0xF << AR40XX_FWD_CTRL0_MIRROR_PORT_S));
- for (port = 0; port < AR40XX_NUM_PORTS; port++) {
- ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(port),
- AR40XX_PORT_LOOKUP_ING_MIRROR_EN, 0);
-
- ar40xx_rmw(priv, AR40XX_REG_PORT_HOL_CTRL1(port),
- AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN, 0);
- }
-
- /* now enable mirroring if necessary */
- if (priv->source_port >= AR40XX_NUM_PORTS ||
- priv->monitor_port >= AR40XX_NUM_PORTS ||
- priv->source_port == priv->monitor_port) {
- return;
- }
-
- ar40xx_rmw(priv, AR40XX_REG_FWD_CTRL0,
- AR40XX_FWD_CTRL0_MIRROR_PORT,
- (priv->monitor_port << AR40XX_FWD_CTRL0_MIRROR_PORT_S));
-
- if (priv->mirror_rx)
- ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(priv->source_port), 0,
- AR40XX_PORT_LOOKUP_ING_MIRROR_EN);
-
- if (priv->mirror_tx)
- ar40xx_rmw(priv, AR40XX_REG_PORT_HOL_CTRL1(priv->source_port),
- 0, AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN);
-}
-
-static int
-ar40xx_sw_get_ports(struct switch_dev *dev, struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
- u8 ports = priv->vlan_table[val->port_vlan];
- int i;
-
- val->len = 0;
- for (i = 0; i < dev->ports; i++) {
- struct switch_port *p;
-
- if (!(ports & BIT(i)))
- continue;
-
- p = &val->value.ports[val->len++];
- p->id = i;
- if ((priv->vlan_tagged & BIT(i)) ||
- (priv->pvid[i] != val->port_vlan))
- p->flags = BIT(SWITCH_PORT_FLAG_TAGGED);
- else
- p->flags = 0;
- }
- return 0;
-}
-
-static int
-ar40xx_sw_set_ports(struct switch_dev *dev, struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
- u8 *vt = &priv->vlan_table[val->port_vlan];
- int i;
-
- *vt = 0;
- for (i = 0; i < val->len; i++) {
- struct switch_port *p = &val->value.ports[i];
-
- if (p->flags & BIT(SWITCH_PORT_FLAG_TAGGED)) {
- if (val->port_vlan == priv->pvid[p->id])
- priv->vlan_tagged |= BIT(p->id);
- } else {
- priv->vlan_tagged &= ~BIT(p->id);
- priv->pvid[p->id] = val->port_vlan;
- }
-
- *vt |= BIT(p->id);
- }
- return 0;
-}
-
-static int
-ar40xx_reg_wait(struct ar40xx_priv *priv, u32 reg, u32 mask, u32 val,
- unsigned timeout)
-{
- int i;
-
- for (i = 0; i < timeout; i++) {
- u32 t;
-
- t = ar40xx_read(priv, reg);
- if ((t & mask) == val)
- return 0;
-
- usleep_range(1000, 2000);
- }
-
- return -ETIMEDOUT;
-}
-
-static int
-ar40xx_mib_op(struct ar40xx_priv *priv, u32 op)
-{
- int ret;
-
- lockdep_assert_held(&priv->mib_lock);
-
- /* Capture the hardware statistics for all ports */
- ar40xx_rmw(priv, AR40XX_REG_MIB_FUNC,
- AR40XX_MIB_FUNC, (op << AR40XX_MIB_FUNC_S));
-
- /* Wait for the capturing to complete. */
- ret = ar40xx_reg_wait(priv, AR40XX_REG_MIB_FUNC,
- AR40XX_MIB_BUSY, 0, 10);
-
- return ret;
-}
-
-static void
-ar40xx_mib_fetch_port_stat(struct ar40xx_priv *priv, int port, bool flush)
-{
- unsigned int base;
- u64 *mib_stats;
- int i;
- u32 num_mibs = ARRAY_SIZE(ar40xx_mibs);
-
- WARN_ON(port >= priv->dev.ports);
-
- lockdep_assert_held(&priv->mib_lock);
-
- base = AR40XX_REG_PORT_STATS_START +
- AR40XX_REG_PORT_STATS_LEN * port;
-
- mib_stats = &priv->mib_stats[port * num_mibs];
- if (flush) {
- u32 len;
-
- len = num_mibs * sizeof(*mib_stats);
- memset(mib_stats, 0, len);
- return;
- }
- for (i = 0; i < num_mibs; i++) {
- const struct ar40xx_mib_desc *mib;
- u64 t;
-
- mib = &ar40xx_mibs[i];
- t = ar40xx_read(priv, base + mib->offset);
- if (mib->size == 2) {
- u64 hi;
-
- hi = ar40xx_read(priv, base + mib->offset + 4);
- t |= hi << 32;
- }
-
- mib_stats[i] += t;
- }
-}
-
-static int
-ar40xx_mib_capture(struct ar40xx_priv *priv)
-{
- return ar40xx_mib_op(priv, AR40XX_MIB_FUNC_CAPTURE);
-}
-
-static int
-ar40xx_mib_flush(struct ar40xx_priv *priv)
-{
- return ar40xx_mib_op(priv, AR40XX_MIB_FUNC_FLUSH);
-}
-
-static int
-ar40xx_sw_set_reset_mibs(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
- unsigned int len;
- int ret;
- u32 num_mibs = ARRAY_SIZE(ar40xx_mibs);
-
- mutex_lock(&priv->mib_lock);
-
- len = priv->dev.ports * num_mibs * sizeof(*priv->mib_stats);
- memset(priv->mib_stats, 0, len);
- ret = ar40xx_mib_flush(priv);
-
- mutex_unlock(&priv->mib_lock);
- return ret;
-}
-
-static int
-ar40xx_sw_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- priv->vlan = !!val->value.i;
- return 0;
-}
-
-static int
-ar40xx_sw_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- val->value.i = priv->vlan;
- return 0;
-}
-
-static int
-ar40xx_sw_set_mirror_rx_enable(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- mutex_lock(&priv->reg_mutex);
- priv->mirror_rx = !!val->value.i;
- ar40xx_set_mirror_regs(priv);
- mutex_unlock(&priv->reg_mutex);
-
- return 0;
-}
-
-static int
-ar40xx_sw_get_mirror_rx_enable(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- mutex_lock(&priv->reg_mutex);
- val->value.i = priv->mirror_rx;
- mutex_unlock(&priv->reg_mutex);
- return 0;
-}
-
-static int
-ar40xx_sw_set_mirror_tx_enable(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- mutex_lock(&priv->reg_mutex);
- priv->mirror_tx = !!val->value.i;
- ar40xx_set_mirror_regs(priv);
- mutex_unlock(&priv->reg_mutex);
-
- return 0;
-}
-
-static int
-ar40xx_sw_get_mirror_tx_enable(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- mutex_lock(&priv->reg_mutex);
- val->value.i = priv->mirror_tx;
- mutex_unlock(&priv->reg_mutex);
- return 0;
-}
-
-static int
-ar40xx_sw_set_mirror_monitor_port(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- mutex_lock(&priv->reg_mutex);
- priv->monitor_port = val->value.i;
- ar40xx_set_mirror_regs(priv);
- mutex_unlock(&priv->reg_mutex);
-
- return 0;
-}
-
-static int
-ar40xx_sw_get_mirror_monitor_port(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- mutex_lock(&priv->reg_mutex);
- val->value.i = priv->monitor_port;
- mutex_unlock(&priv->reg_mutex);
- return 0;
-}
-
-static int
-ar40xx_sw_set_mirror_source_port(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- mutex_lock(&priv->reg_mutex);
- priv->source_port = val->value.i;
- ar40xx_set_mirror_regs(priv);
- mutex_unlock(&priv->reg_mutex);
-
- return 0;
-}
-
-static int
-ar40xx_sw_get_mirror_source_port(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- mutex_lock(&priv->reg_mutex);
- val->value.i = priv->source_port;
- mutex_unlock(&priv->reg_mutex);
- return 0;
-}
-
-static int
-ar40xx_sw_set_linkdown(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- if (val->value.i == 1)
- ar40xx_port_phy_linkdown(priv);
- else
- ar40xx_phy_init(priv);
-
- return 0;
-}
-
-static int
-ar40xx_sw_set_port_reset_mib(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
- int port;
- int ret;
-
- port = val->port_vlan;
- if (port >= dev->ports)
- return -EINVAL;
-
- mutex_lock(&priv->mib_lock);
- ret = ar40xx_mib_capture(priv);
- if (ret)
- goto unlock;
-
- ar40xx_mib_fetch_port_stat(priv, port, true);
-
-unlock:
- mutex_unlock(&priv->mib_lock);
- return ret;
-}
-
-static int
-ar40xx_sw_get_port_mib(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
- u64 *mib_stats;
- int port;
- int ret;
- char *buf = priv->buf;
- int i, len = 0;
- u32 num_mibs = ARRAY_SIZE(ar40xx_mibs);
-
- port = val->port_vlan;
- if (port >= dev->ports)
- return -EINVAL;
-
- mutex_lock(&priv->mib_lock);
- ret = ar40xx_mib_capture(priv);
- if (ret)
- goto unlock;
-
- ar40xx_mib_fetch_port_stat(priv, port, false);
-
- len += snprintf(buf + len, sizeof(priv->buf) - len,
- "Port %d MIB counters\n",
- port);
-
- mib_stats = &priv->mib_stats[port * num_mibs];
- for (i = 0; i < num_mibs; i++)
- len += snprintf(buf + len, sizeof(priv->buf) - len,
- "%-12s: %llu\n",
- ar40xx_mibs[i].name,
- mib_stats[i]);
-
- val->value.s = buf;
- val->len = len;
-
-unlock:
- mutex_unlock(&priv->mib_lock);
- return ret;
-}
-
-static int
-ar40xx_sw_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- priv->vlan_id[val->port_vlan] = val->value.i;
- return 0;
-}
-
-static int
-ar40xx_sw_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- val->value.i = priv->vlan_id[val->port_vlan];
- return 0;
-}
-
-static int
-ar40xx_sw_get_pvid(struct switch_dev *dev, int port, int *vlan)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
- *vlan = priv->pvid[port];
- return 0;
-}
-
-static int
-ar40xx_sw_set_pvid(struct switch_dev *dev, int port, int vlan)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- /* make sure no invalid PVIDs get set */
- if (vlan >= dev->vlans)
- return -EINVAL;
-
- priv->pvid[port] = vlan;
- return 0;
-}
-
-static void
-ar40xx_read_port_link(struct ar40xx_priv *priv, int port,
- struct switch_port_link *link)
-{
- u32 status;
- u32 speed;
-
- memset(link, 0, sizeof(*link));
-
- status = ar40xx_read(priv, AR40XX_REG_PORT_STATUS(port));
-
- link->aneg = !!(status & AR40XX_PORT_AUTO_LINK_EN);
- if (link->aneg || (port != AR40XX_PORT_CPU))
- link->link = !!(status & AR40XX_PORT_STATUS_LINK_UP);
- else
- link->link = true;
-
- if (!link->link)
- return;
-
- link->duplex = !!(status & AR40XX_PORT_DUPLEX);
- link->tx_flow = !!(status & AR40XX_PORT_STATUS_TXFLOW);
- link->rx_flow = !!(status & AR40XX_PORT_STATUS_RXFLOW);
-
- speed = (status & AR40XX_PORT_SPEED) >>
- AR40XX_PORT_STATUS_SPEED_S;
-
- switch (speed) {
- case AR40XX_PORT_SPEED_10M:
- link->speed = SWITCH_PORT_SPEED_10;
- break;
- case AR40XX_PORT_SPEED_100M:
- link->speed = SWITCH_PORT_SPEED_100;
- break;
- case AR40XX_PORT_SPEED_1000M:
- link->speed = SWITCH_PORT_SPEED_1000;
- break;
- default:
- link->speed = SWITCH_PORT_SPEED_UNKNOWN;
- break;
- }
-}
-
-static int
-ar40xx_sw_get_port_link(struct switch_dev *dev, int port,
- struct switch_port_link *link)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
-
- ar40xx_read_port_link(priv, port, link);
- return 0;
-}
-
-static const struct switch_attr ar40xx_sw_attr_globals[] = {
- {
- .type = SWITCH_TYPE_INT,
- .name = "enable_vlan",
- .description = "Enable VLAN mode",
- .set = ar40xx_sw_set_vlan,
- .get = ar40xx_sw_get_vlan,
- .max = 1
- },
- {
- .type = SWITCH_TYPE_NOVAL,
- .name = "reset_mibs",
- .description = "Reset all MIB counters",
- .set = ar40xx_sw_set_reset_mibs,
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "enable_mirror_rx",
- .description = "Enable mirroring of RX packets",
- .set = ar40xx_sw_set_mirror_rx_enable,
- .get = ar40xx_sw_get_mirror_rx_enable,
- .max = 1
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "enable_mirror_tx",
- .description = "Enable mirroring of TX packets",
- .set = ar40xx_sw_set_mirror_tx_enable,
- .get = ar40xx_sw_get_mirror_tx_enable,
- .max = 1
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "mirror_monitor_port",
- .description = "Mirror monitor port",
- .set = ar40xx_sw_set_mirror_monitor_port,
- .get = ar40xx_sw_get_mirror_monitor_port,
- .max = AR40XX_NUM_PORTS - 1
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "mirror_source_port",
- .description = "Mirror source port",
- .set = ar40xx_sw_set_mirror_source_port,
- .get = ar40xx_sw_get_mirror_source_port,
- .max = AR40XX_NUM_PORTS - 1
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "linkdown",
- .description = "Link down all the PHYs",
- .set = ar40xx_sw_set_linkdown,
- .max = 1
- },
-};
-
-static const struct switch_attr ar40xx_sw_attr_port[] = {
- {
- .type = SWITCH_TYPE_NOVAL,
- .name = "reset_mib",
- .description = "Reset single port MIB counters",
- .set = ar40xx_sw_set_port_reset_mib,
- },
- {
- .type = SWITCH_TYPE_STRING,
- .name = "mib",
- .description = "Get port's MIB counters",
- .set = NULL,
- .get = ar40xx_sw_get_port_mib,
- },
-};
-
-const struct switch_attr ar40xx_sw_attr_vlan[] = {
- {
- .type = SWITCH_TYPE_INT,
- .name = "vid",
- .description = "VLAN ID (0-4094)",
- .set = ar40xx_sw_set_vid,
- .get = ar40xx_sw_get_vid,
- .max = 4094,
- },
-};
-
-/* End of swconfig support */
-
-static int
-ar40xx_wait_bit(struct ar40xx_priv *priv, int reg, u32 mask, u32 val)
-{
- int timeout = 20;
- u32 t;
-
- while (1) {
- t = ar40xx_read(priv, reg);
- if ((t & mask) == val)
- return 0;
-
- if (timeout-- <= 0)
- break;
-
- usleep_range(10, 20);
- }
-
- pr_err("ar40xx: timeout for reg %08x: %08x & %08x != %08x\n",
- (unsigned int)reg, t, mask, val);
- return -ETIMEDOUT;
-}
-
-static int
-ar40xx_atu_flush(struct ar40xx_priv *priv)
-{
- int ret;
-
- ret = ar40xx_wait_bit(priv, AR40XX_REG_ATU_FUNC,
- AR40XX_ATU_FUNC_BUSY, 0);
- if (!ret)
- ar40xx_write(priv, AR40XX_REG_ATU_FUNC,
- AR40XX_ATU_FUNC_OP_FLUSH |
- AR40XX_ATU_FUNC_BUSY);
-
- return ret;
-}
-
-static void
-ar40xx_ess_reset(struct ar40xx_priv *priv)
-{
- reset_control_assert(priv->ess_rst);
- mdelay(10);
- reset_control_deassert(priv->ess_rst);
- /* Waiting for all inner tables init done.
- * It cost 5~10ms.
- */
- mdelay(10);
-
- pr_info("ESS reset ok!\n");
-}
-
-/* Start of psgmii self test */
-
-static void
-ar40xx_malibu_psgmii_ess_reset(struct ar40xx_priv *priv)
-{
- u32 n;
- struct mii_bus *bus = priv->mii_bus;
- /* reset phy psgmii */
- /* fix phy psgmii RX 20bit */
- mdiobus_write(bus, 5, 0x0, 0x005b);
- /* reset phy psgmii */
- mdiobus_write(bus, 5, 0x0, 0x001b);
- /* release reset phy psgmii */
- mdiobus_write(bus, 5, 0x0, 0x005b);
-
- for (n = 0; n < AR40XX_PSGMII_CALB_NUM; n++) {
- u16 status;
-
- status = ar40xx_phy_mmd_read(priv, 5, 1, 0x28);
- if (status & BIT(0))
- break;
- /* Polling interval to check PSGMII PLL in malibu is ready
- * the worst time is 8.67ms
- * for 25MHz reference clock
- * [512+(128+2048)*49]*80ns+100us
- */
- mdelay(2);
- }
- mdelay(50);
-
- /*check malibu psgmii calibration done end..*/
-
- /*freeze phy psgmii RX CDR*/
- mdiobus_write(bus, 5, 0x1a, 0x2230);
-
- ar40xx_ess_reset(priv);
-
- /*check psgmii calibration done start*/
- for (n = 0; n < AR40XX_PSGMII_CALB_NUM; n++) {
- u32 status;
-
- status = ar40xx_psgmii_read(priv, 0xa0);
- if (status & BIT(0))
- break;
- /* Polling interval to check PSGMII PLL in ESS is ready */
- mdelay(2);
- }
- mdelay(50);
-
- /* check dakota psgmii calibration done end..*/
-
- /* relesae phy psgmii RX CDR */
- mdiobus_write(bus, 5, 0x1a, 0x3230);
- /* release phy psgmii RX 20bit */
- mdiobus_write(bus, 5, 0x0, 0x005f);
- mdelay(200);
-}
-
-static void
-ar40xx_psgmii_single_phy_testing(struct ar40xx_priv *priv, int phy)
-{
- int j;
- u32 tx_ok, tx_error;
- u32 rx_ok, rx_error;
- u32 tx_ok_high16;
- u32 rx_ok_high16;
- u32 tx_all_ok, rx_all_ok;
- struct mii_bus *bus = priv->mii_bus;
-
- mdiobus_write(bus, phy, 0x0, 0x9000);
- mdiobus_write(bus, phy, 0x0, 0x4140);
-
- for (j = 0; j < AR40XX_PSGMII_CALB_NUM; j++) {
- u16 status;
-
- status = mdiobus_read(bus, phy, 0x11);
- if (status & AR40XX_PHY_SPEC_STATUS_LINK)
- break;
- /* the polling interval to check if the PHY link up or not
- * maxwait_timer: 750 ms +/-10 ms
- * minwait_timer : 1 us +/- 0.1us
- * time resides in minwait_timer ~ maxwait_timer
- * see IEEE 802.3 section 40.4.5.2
- */
- mdelay(8);
- }
-
- /* enable check */
- ar40xx_phy_mmd_write(priv, phy, 7, 0x8029, 0x0000);
- ar40xx_phy_mmd_write(priv, phy, 7, 0x8029, 0x0003);
-
- /* start traffic */
- ar40xx_phy_mmd_write(priv, phy, 7, 0x8020, 0xa000);
- /* wait for all traffic end
- * 4096(pkt num)*1524(size)*8ns(125MHz)=49.9ms
- */
- mdelay(50);
-
- /* check counter */
- tx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802e);
- tx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802d);
- tx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802f);
- rx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802b);
- rx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802a);
- rx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802c);
- tx_all_ok = tx_ok + (tx_ok_high16 << 16);
- rx_all_ok = rx_ok + (rx_ok_high16 << 16);
- if (tx_all_ok == 0x1000 && tx_error == 0) {
- /* success */
- priv->phy_t_status &= (~BIT(phy));
- } else {
- pr_info("PHY %d single test PSGMII issue happen!\n", phy);
- priv->phy_t_status |= BIT(phy);
- }
-
- mdiobus_write(bus, phy, 0x0, 0x1840);
-}
-
-static void
-ar40xx_psgmii_all_phy_testing(struct ar40xx_priv *priv)
-{
- int phy, j;
- struct mii_bus *bus = priv->mii_bus;
-
- mdiobus_write(bus, 0x1f, 0x0, 0x9000);
- mdiobus_write(bus, 0x1f, 0x0, 0x4140);
-
- for (j = 0; j < AR40XX_PSGMII_CALB_NUM; j++) {
- for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
- u16 status;
-
- status = mdiobus_read(bus, phy, 0x11);
- if (!(status & BIT(10)))
- break;
- }
-
- if (phy >= (AR40XX_NUM_PORTS - 1))
- break;
- /* The polling interva to check if the PHY link up or not */
- mdelay(8);
- }
- /* enable check */
- ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0000);
- ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0003);
-
- /* start traffic */
- ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8020, 0xa000);
- /* wait for all traffic end
- * 4096(pkt num)*1524(size)*8ns(125MHz)=49.9ms
- */
- mdelay(50);
-
- for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
- u32 tx_ok, tx_error;
- u32 rx_ok, rx_error;
- u32 tx_ok_high16;
- u32 rx_ok_high16;
- u32 tx_all_ok, rx_all_ok;
-
- /* check counter */
- tx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802e);
- tx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802d);
- tx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802f);
- rx_ok = ar40xx_phy_mmd_read(priv, phy, 7, 0x802b);
- rx_ok_high16 = ar40xx_phy_mmd_read(priv, phy, 7, 0x802a);
- rx_error = ar40xx_phy_mmd_read(priv, phy, 7, 0x802c);
- tx_all_ok = tx_ok + (tx_ok_high16<<16);
- rx_all_ok = rx_ok + (rx_ok_high16<<16);
- if (tx_all_ok == 0x1000 && tx_error == 0) {
- /* success */
- priv->phy_t_status &= ~BIT(phy + 8);
- } else {
- pr_info("PHY%d test see issue!\n", phy);
- priv->phy_t_status |= BIT(phy + 8);
- }
- }
-
- pr_debug("PHY all test 0x%x \r\n", priv->phy_t_status);
-}
-
-void
-ar40xx_psgmii_self_test(struct ar40xx_priv *priv)
-{
- u32 i, phy;
- struct mii_bus *bus = priv->mii_bus;
-
- ar40xx_malibu_psgmii_ess_reset(priv);
-
- /* switch to access MII reg for copper */
- mdiobus_write(bus, 4, 0x1f, 0x8500);
- for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
- /*enable phy mdio broadcast write*/
- ar40xx_phy_mmd_write(priv, phy, 7, 0x8028, 0x801f);
- }
- /* force no link by power down */
- mdiobus_write(bus, 0x1f, 0x0, 0x1840);
- /*packet number*/
- ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8021, 0x1000);
- ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8062, 0x05e0);
-
- /*fix mdi status */
- mdiobus_write(bus, 0x1f, 0x10, 0x6800);
- for (i = 0; i < AR40XX_PSGMII_CALB_NUM; i++) {
- priv->phy_t_status = 0;
-
- for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
- ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(phy + 1),
- AR40XX_PORT_LOOKUP_LOOPBACK,
- AR40XX_PORT_LOOKUP_LOOPBACK);
- }
-
- for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++)
- ar40xx_psgmii_single_phy_testing(priv, phy);
-
- ar40xx_psgmii_all_phy_testing(priv);
-
- if (priv->phy_t_status)
- ar40xx_malibu_psgmii_ess_reset(priv);
- else
- break;
- }
-
- if (i >= AR40XX_PSGMII_CALB_NUM)
- pr_info("PSGMII cannot recover\n");
- else
- pr_debug("PSGMII recovered after %d times reset\n", i);
-
- /* configuration recover */
- /* packet number */
- ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8021, 0x0);
- /* disable check */
- ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8029, 0x0);
- /* disable traffic */
- ar40xx_phy_mmd_write(priv, 0x1f, 7, 0x8020, 0x0);
-}
-
-void
-ar40xx_psgmii_self_test_clean(struct ar40xx_priv *priv)
-{
- int phy;
- struct mii_bus *bus = priv->mii_bus;
-
- /* disable phy internal loopback */
- mdiobus_write(bus, 0x1f, 0x10, 0x6860);
- mdiobus_write(bus, 0x1f, 0x0, 0x9040);
-
- for (phy = 0; phy < AR40XX_NUM_PORTS - 1; phy++) {
- /* disable mac loop back */
- ar40xx_rmw(priv, AR40XX_REG_PORT_LOOKUP(phy + 1),
- AR40XX_PORT_LOOKUP_LOOPBACK, 0);
- /* disable phy mdio broadcast write */
- ar40xx_phy_mmd_write(priv, phy, 7, 0x8028, 0x001f);
- }
-
- /* clear fdb entry */
- ar40xx_atu_flush(priv);
-}
-
-/* End of psgmii self test */
-
-static void
-ar40xx_mac_mode_init(struct ar40xx_priv *priv, u32 mode)
-{
- if (mode == PORT_WRAPPER_PSGMII) {
- ar40xx_psgmii_write(priv, AR40XX_PSGMII_MODE_CONTROL, 0x2200);
- ar40xx_psgmii_write(priv, AR40XX_PSGMIIPHY_TX_CONTROL, 0x8380);
- }
-}
-
-static
-int ar40xx_cpuport_setup(struct ar40xx_priv *priv)
-{
- u32 t;
-
- t = AR40XX_PORT_STATUS_TXFLOW |
- AR40XX_PORT_STATUS_RXFLOW |
- AR40XX_PORT_TXHALF_FLOW |
- AR40XX_PORT_DUPLEX |
- AR40XX_PORT_SPEED_1000M;
- ar40xx_write(priv, AR40XX_REG_PORT_STATUS(0), t);
- usleep_range(10, 20);
-
- t |= AR40XX_PORT_TX_EN |
- AR40XX_PORT_RX_EN;
- ar40xx_write(priv, AR40XX_REG_PORT_STATUS(0), t);
-
- return 0;
-}
-
-static void
-ar40xx_init_port(struct ar40xx_priv *priv, int port)
-{
- u32 t;
-
- ar40xx_write(priv, AR40XX_REG_PORT_STATUS(port), 0);
-
- ar40xx_write(priv, AR40XX_REG_PORT_HEADER(port), 0);
-
- ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), 0);
-
- t = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH << AR40XX_PORT_VLAN1_OUT_MODE_S;
- ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t);
-
- t = AR40XX_PORT_LOOKUP_LEARN;
- t |= AR40XX_PORT_STATE_FORWARD << AR40XX_PORT_LOOKUP_STATE_S;
- ar40xx_write(priv, AR40XX_REG_PORT_LOOKUP(port), t);
-}
-
-void
-ar40xx_init_globals(struct ar40xx_priv *priv)
-{
- u32 t;
-
- /* enable CPU port and disable mirror port */
- t = AR40XX_FWD_CTRL0_CPU_PORT_EN |
- AR40XX_FWD_CTRL0_MIRROR_PORT;
- ar40xx_write(priv, AR40XX_REG_FWD_CTRL0, t);
-
- /* forward multicast and broadcast frames to CPU */
- t = (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_UC_FLOOD_S) |
- (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_MC_FLOOD_S) |
- (AR40XX_PORTS_ALL << AR40XX_FWD_CTRL1_BC_FLOOD_S);
- ar40xx_write(priv, AR40XX_REG_FWD_CTRL1, t);
-
- /* enable jumbo frames */
- ar40xx_rmw(priv, AR40XX_REG_MAX_FRAME_SIZE,
- AR40XX_MAX_FRAME_SIZE_MTU, 9018 + 8 + 2);
-
- /* Enable MIB counters */
- ar40xx_rmw(priv, AR40XX_REG_MODULE_EN, 0,
- AR40XX_MODULE_EN_MIB);
-
- /* Disable AZ */
- ar40xx_write(priv, AR40XX_REG_EEE_CTRL, 0);
-
- /* set flowctrl thershold for cpu port */
- t = (AR40XX_PORT0_FC_THRESH_ON_DFLT << 16) |
- AR40XX_PORT0_FC_THRESH_OFF_DFLT;
- ar40xx_write(priv, AR40XX_REG_PORT_FLOWCTRL_THRESH(0), t);
-}
-
-static int
-ar40xx_hw_init(struct ar40xx_priv *priv)
-{
- u32 i;
-
- ar40xx_ess_reset(priv);
-
- if (!priv->mii_bus)
- return -1;
-
- ar40xx_psgmii_self_test(priv);
- ar40xx_psgmii_self_test_clean(priv);
-
- ar40xx_mac_mode_init(priv, priv->mac_mode);
-
- for (i = 0; i < priv->dev.ports; i++)
- ar40xx_init_port(priv, i);
-
- ar40xx_init_globals(priv);
-
- return 0;
-}
-
-/* Start of qm error WAR */
-
-static
-int ar40xx_force_1g_full(struct ar40xx_priv *priv, u32 port_id)
-{
- u32 reg;
-
- if (port_id < 0 || port_id > 6)
- return -1;
-
- reg = AR40XX_REG_PORT_STATUS(port_id);
- return ar40xx_rmw(priv, reg, AR40XX_PORT_SPEED,
- (AR40XX_PORT_SPEED_1000M | AR40XX_PORT_DUPLEX));
-}
-
-static
-int ar40xx_get_qm_status(struct ar40xx_priv *priv,
- u32 port_id, u32 *qm_buffer_err)
-{
- u32 reg;
- u32 qm_val;
-
- if (port_id < 1 || port_id > 5) {
- *qm_buffer_err = 0;
- return -1;
- }
-
- if (port_id < 4) {
- reg = AR40XX_REG_QM_PORT0_3_QNUM;
- ar40xx_write(priv, AR40XX_REG_QM_DEBUG_ADDR, reg);
- qm_val = ar40xx_read(priv, AR40XX_REG_QM_DEBUG_VALUE);
- /* every 8 bits for each port */
- *qm_buffer_err = (qm_val >> (port_id * 8)) & 0xFF;
- } else {
- reg = AR40XX_REG_QM_PORT4_6_QNUM;
- ar40xx_write(priv, AR40XX_REG_QM_DEBUG_ADDR, reg);
- qm_val = ar40xx_read(priv, AR40XX_REG_QM_DEBUG_VALUE);
- /* every 8 bits for each port */
- *qm_buffer_err = (qm_val >> ((port_id-4) * 8)) & 0xFF;
- }
-
- return 0;
-}
-
-static void
-ar40xx_sw_mac_polling_task(struct ar40xx_priv *priv)
-{
- static int task_count;
- u32 i;
- u32 reg, value;
- u32 link, speed, duplex;
- u32 qm_buffer_err;
- u16 port_phy_status[AR40XX_NUM_PORTS];
- static u32 qm_err_cnt[AR40XX_NUM_PORTS] = {0, 0, 0, 0, 0, 0};
- static u32 link_cnt[AR40XX_NUM_PORTS] = {0, 0, 0, 0, 0, 0};
- struct mii_bus *bus = NULL;
-
- if (!priv || !priv->mii_bus)
- return;
-
- bus = priv->mii_bus;
-
- ++task_count;
-
- for (i = 1; i < AR40XX_NUM_PORTS; ++i) {
- port_phy_status[i] =
- mdiobus_read(bus, i-1, AR40XX_PHY_SPEC_STATUS);
-
- speed = FIELD_GET(AR40XX_PHY_SPEC_STATUS_SPEED,
- port_phy_status[i]);
- link = FIELD_GET(AR40XX_PHY_SPEC_STATUS_LINK,
- port_phy_status[i]);
- duplex = FIELD_GET(AR40XX_PHY_SPEC_STATUS_DUPLEX,
- port_phy_status[i]);
-
- if (link != priv->ar40xx_port_old_link[i]) {
- ++link_cnt[i];
- /* Up --> Down */
- if ((priv->ar40xx_port_old_link[i] ==
- AR40XX_PORT_LINK_UP) &&
- (link == AR40XX_PORT_LINK_DOWN)) {
- /* LINK_EN disable(MAC force mode)*/
- reg = AR40XX_REG_PORT_STATUS(i);
- ar40xx_rmw(priv, reg,
- AR40XX_PORT_AUTO_LINK_EN, 0);
-
- /* Check queue buffer */
- qm_err_cnt[i] = 0;
- ar40xx_get_qm_status(priv, i, &qm_buffer_err);
- if (qm_buffer_err) {
- priv->ar40xx_port_qm_buf[i] =
- AR40XX_QM_NOT_EMPTY;
- } else {
- u16 phy_val = 0;
-
- priv->ar40xx_port_qm_buf[i] =
- AR40XX_QM_EMPTY;
- ar40xx_force_1g_full(priv, i);
- /* Ref:QCA8337 Datasheet,Clearing
- * MENU_CTRL_EN prevents phy to
- * stuck in 100BT mode when
- * bringing up the link
- */
- ar40xx_phy_dbg_read(priv, i-1,
- AR40XX_PHY_DEBUG_0,
- &phy_val);
- phy_val &= (~AR40XX_PHY_MANU_CTRL_EN);
- ar40xx_phy_dbg_write(priv, i-1,
- AR40XX_PHY_DEBUG_0,
- phy_val);
- }
- priv->ar40xx_port_old_link[i] = link;
- } else if ((priv->ar40xx_port_old_link[i] ==
- AR40XX_PORT_LINK_DOWN) &&
- (link == AR40XX_PORT_LINK_UP)) {
- /* Down --> Up */
- if (priv->port_link_up[i] < 1) {
- ++priv->port_link_up[i];
- } else {
- /* Change port status */
- reg = AR40XX_REG_PORT_STATUS(i);
- value = ar40xx_read(priv, reg);
- priv->port_link_up[i] = 0;
-
- value &= ~(AR40XX_PORT_DUPLEX |
- AR40XX_PORT_SPEED);
- value |= speed | (duplex ? BIT(6) : 0);
- ar40xx_write(priv, reg, value);
- /* clock switch need such time
- * to avoid glitch
- */
- usleep_range(100, 200);
-
- value |= AR40XX_PORT_AUTO_LINK_EN;
- ar40xx_write(priv, reg, value);
- /* HW need such time to make sure link
- * stable before enable MAC
- */
- usleep_range(100, 200);
-
- if (speed == AR40XX_PORT_SPEED_100M) {
- u16 phy_val = 0;
- /* Enable @100M, if down to 10M
- * clock will change smoothly
- */
- ar40xx_phy_dbg_read(priv, i-1,
- 0,
- &phy_val);
- phy_val |=
- AR40XX_PHY_MANU_CTRL_EN;
- ar40xx_phy_dbg_write(priv, i-1,
- 0,
- phy_val);
- }
- priv->ar40xx_port_old_link[i] = link;
- }
- }
- }
-
- if (priv->ar40xx_port_qm_buf[i] == AR40XX_QM_NOT_EMPTY) {
- /* Check QM */
- ar40xx_get_qm_status(priv, i, &qm_buffer_err);
- if (qm_buffer_err) {
- ++qm_err_cnt[i];
- } else {
- priv->ar40xx_port_qm_buf[i] =
- AR40XX_QM_EMPTY;
- qm_err_cnt[i] = 0;
- ar40xx_force_1g_full(priv, i);
- }
- }
- }
-}
-
-static void
-ar40xx_qm_err_check_work_task(struct work_struct *work)
-{
- struct ar40xx_priv *priv = container_of(work, struct ar40xx_priv,
- qm_dwork.work);
-
- mutex_lock(&priv->qm_lock);
-
- ar40xx_sw_mac_polling_task(priv);
-
- mutex_unlock(&priv->qm_lock);
-
- schedule_delayed_work(&priv->qm_dwork,
- msecs_to_jiffies(AR40XX_QM_WORK_DELAY));
-}
-
-static int
-ar40xx_qm_err_check_work_start(struct ar40xx_priv *priv)
-{
- mutex_init(&priv->qm_lock);
-
- INIT_DELAYED_WORK(&priv->qm_dwork, ar40xx_qm_err_check_work_task);
-
- schedule_delayed_work(&priv->qm_dwork,
- msecs_to_jiffies(AR40XX_QM_WORK_DELAY));
-
- return 0;
-}
-
-/* End of qm error WAR */
-
-static int
-ar40xx_vlan_init(struct ar40xx_priv *priv)
-{
- int port;
- unsigned long bmp;
-
- /* By default Enable VLAN */
- priv->vlan = 1;
- priv->vlan_table[AR40XX_LAN_VLAN] = priv->cpu_bmp | priv->lan_bmp;
- priv->vlan_table[AR40XX_WAN_VLAN] = priv->cpu_bmp | priv->wan_bmp;
- priv->vlan_tagged = priv->cpu_bmp;
- bmp = priv->lan_bmp;
- for_each_set_bit(port, &bmp, AR40XX_NUM_PORTS)
- priv->pvid[port] = AR40XX_LAN_VLAN;
-
- bmp = priv->wan_bmp;
- for_each_set_bit(port, &bmp, AR40XX_NUM_PORTS)
- priv->pvid[port] = AR40XX_WAN_VLAN;
-
- return 0;
-}
-
-static void
-ar40xx_mib_work_func(struct work_struct *work)
-{
- struct ar40xx_priv *priv;
- int err;
-
- priv = container_of(work, struct ar40xx_priv, mib_work.work);
-
- mutex_lock(&priv->mib_lock);
-
- err = ar40xx_mib_capture(priv);
- if (err)
- goto next_port;
-
- ar40xx_mib_fetch_port_stat(priv, priv->mib_next_port, false);
-
-next_port:
- priv->mib_next_port++;
- if (priv->mib_next_port >= priv->dev.ports)
- priv->mib_next_port = 0;
-
- mutex_unlock(&priv->mib_lock);
-
- schedule_delayed_work(&priv->mib_work,
- msecs_to_jiffies(AR40XX_MIB_WORK_DELAY));
-}
-
-static void
-ar40xx_setup_port(struct ar40xx_priv *priv, int port, u32 members)
-{
- u32 t;
- u32 egress, ingress;
- u32 pvid = priv->vlan_id[priv->pvid[port]];
-
- if (priv->vlan) {
- egress = AR40XX_PORT_VLAN1_OUT_MODE_UNMOD;
-
- ingress = AR40XX_IN_SECURE;
- } else {
- egress = AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH;
- ingress = AR40XX_IN_PORT_ONLY;
- }
-
- t = pvid << AR40XX_PORT_VLAN0_DEF_SVID_S;
- t |= pvid << AR40XX_PORT_VLAN0_DEF_CVID_S;
- ar40xx_write(priv, AR40XX_REG_PORT_VLAN0(port), t);
-
- t = AR40XX_PORT_VLAN1_PORT_VLAN_PROP;
- t |= egress << AR40XX_PORT_VLAN1_OUT_MODE_S;
-
- ar40xx_write(priv, AR40XX_REG_PORT_VLAN1(port), t);
-
- t = members;
- t |= AR40XX_PORT_LOOKUP_LEARN;
- t |= ingress << AR40XX_PORT_LOOKUP_IN_MODE_S;
- t |= AR40XX_PORT_STATE_FORWARD << AR40XX_PORT_LOOKUP_STATE_S;
- ar40xx_write(priv, AR40XX_REG_PORT_LOOKUP(port), t);
-}
-
-static void
-ar40xx_vtu_op(struct ar40xx_priv *priv, u32 op, u32 val)
-{
- if (ar40xx_wait_bit(priv, AR40XX_REG_VTU_FUNC1,
- AR40XX_VTU_FUNC1_BUSY, 0))
- return;
-
- if ((op & AR40XX_VTU_FUNC1_OP) == AR40XX_VTU_FUNC1_OP_LOAD)
- ar40xx_write(priv, AR40XX_REG_VTU_FUNC0, val);
-
- op |= AR40XX_VTU_FUNC1_BUSY;
- ar40xx_write(priv, AR40XX_REG_VTU_FUNC1, op);
-}
-
-static void
-ar40xx_vtu_load_vlan(struct ar40xx_priv *priv, u32 vid, u32 port_mask)
-{
- u32 op;
- u32 val;
- int i;
-
- op = AR40XX_VTU_FUNC1_OP_LOAD | (vid << AR40XX_VTU_FUNC1_VID_S);
- val = AR40XX_VTU_FUNC0_VALID | AR40XX_VTU_FUNC0_IVL;
- for (i = 0; i < AR40XX_NUM_PORTS; i++) {
- u32 mode;
-
- if ((port_mask & BIT(i)) == 0)
- mode = AR40XX_VTU_FUNC0_EG_MODE_NOT;
- else if (priv->vlan == 0)
- mode = AR40XX_VTU_FUNC0_EG_MODE_KEEP;
- else if ((priv->vlan_tagged & BIT(i)) ||
- (priv->vlan_id[priv->pvid[i]] != vid))
- mode = AR40XX_VTU_FUNC0_EG_MODE_TAG;
- else
- mode = AR40XX_VTU_FUNC0_EG_MODE_UNTAG;
-
- val |= mode << AR40XX_VTU_FUNC0_EG_MODE_S(i);
- }
- ar40xx_vtu_op(priv, op, val);
-}
-
-static void
-ar40xx_vtu_flush(struct ar40xx_priv *priv)
-{
- ar40xx_vtu_op(priv, AR40XX_VTU_FUNC1_OP_FLUSH, 0);
-}
-
-static int
-ar40xx_sw_hw_apply(struct switch_dev *dev)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
- u8 portmask[AR40XX_NUM_PORTS];
- int i, j;
-
- mutex_lock(&priv->reg_mutex);
- /* flush all vlan entries */
- ar40xx_vtu_flush(priv);
-
- memset(portmask, 0, sizeof(portmask));
- if (priv->vlan) {
- for (j = 0; j < AR40XX_MAX_VLANS; j++) {
- u8 vp = priv->vlan_table[j];
-
- if (!vp)
- continue;
-
- for (i = 0; i < dev->ports; i++) {
- u8 mask = BIT(i);
-
- if (vp & mask)
- portmask[i] |= vp & ~mask;
- }
-
- ar40xx_vtu_load_vlan(priv, priv->vlan_id[j],
- priv->vlan_table[j]);
- }
- } else {
- /* 8021q vlan disabled */
- for (i = 0; i < dev->ports; i++) {
- if (i == AR40XX_PORT_CPU)
- continue;
-
- portmask[i] = BIT(AR40XX_PORT_CPU);
- portmask[AR40XX_PORT_CPU] |= BIT(i);
- }
- }
-
- /* update the port destination mask registers and tag settings */
- for (i = 0; i < dev->ports; i++)
- ar40xx_setup_port(priv, i, portmask[i]);
-
- ar40xx_set_mirror_regs(priv);
-
- mutex_unlock(&priv->reg_mutex);
- return 0;
-}
-
-static int
-ar40xx_sw_reset_switch(struct switch_dev *dev)
-{
- struct ar40xx_priv *priv = swdev_to_ar40xx(dev);
- int i, rv;
-
- mutex_lock(&priv->reg_mutex);
- memset(&priv->vlan, 0, sizeof(struct ar40xx_priv) -
- offsetof(struct ar40xx_priv, vlan));
-
- for (i = 0; i < AR40XX_MAX_VLANS; i++)
- priv->vlan_id[i] = i;
-
- ar40xx_vlan_init(priv);
-
- priv->mirror_rx = false;
- priv->mirror_tx = false;
- priv->source_port = 0;
- priv->monitor_port = 0;
-
- mutex_unlock(&priv->reg_mutex);
-
- rv = ar40xx_sw_hw_apply(dev);
- return rv;
-}
-
-static int
-ar40xx_start(struct ar40xx_priv *priv)
-{
- int ret;
-
- ret = ar40xx_hw_init(priv);
- if (ret)
- return ret;
-
- ret = ar40xx_sw_reset_switch(&priv->dev);
- if (ret)
- return ret;
-
- /* at last, setup cpu port */
- ret = ar40xx_cpuport_setup(priv);
- if (ret)
- return ret;
-
- schedule_delayed_work(&priv->mib_work,
- msecs_to_jiffies(AR40XX_MIB_WORK_DELAY));
-
- ar40xx_qm_err_check_work_start(priv);
-
- return 0;
-}
-
-static const struct switch_dev_ops ar40xx_sw_ops = {
- .attr_global = {
- .attr = ar40xx_sw_attr_globals,
- .n_attr = ARRAY_SIZE(ar40xx_sw_attr_globals),
- },
- .attr_port = {
- .attr = ar40xx_sw_attr_port,
- .n_attr = ARRAY_SIZE(ar40xx_sw_attr_port),
- },
- .attr_vlan = {
- .attr = ar40xx_sw_attr_vlan,
- .n_attr = ARRAY_SIZE(ar40xx_sw_attr_vlan),
- },
- .get_port_pvid = ar40xx_sw_get_pvid,
- .set_port_pvid = ar40xx_sw_set_pvid,
- .get_vlan_ports = ar40xx_sw_get_ports,
- .set_vlan_ports = ar40xx_sw_set_ports,
- .apply_config = ar40xx_sw_hw_apply,
- .reset_switch = ar40xx_sw_reset_switch,
- .get_port_link = ar40xx_sw_get_port_link,
-};
-
-/* Platform driver probe function */
-
-static int ar40xx_probe(struct platform_device *pdev)
-{
- struct device_node *switch_node;
- struct device_node *psgmii_node;
- struct device_node *mdio_node;
- const __be32 *mac_mode;
- struct clk *ess_clk;
- struct switch_dev *swdev;
- struct ar40xx_priv *priv;
- u32 len;
- u32 num_mibs;
- struct resource psgmii_base = {0};
- struct resource switch_base = {0};
- int ret;
-
- priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- platform_set_drvdata(pdev, priv);
- ar40xx_priv = priv;
-
- switch_node = of_node_get(pdev->dev.of_node);
- if (of_address_to_resource(switch_node, 0, &switch_base) != 0)
- return -EIO;
-
- priv->hw_addr = devm_ioremap_resource(&pdev->dev, &switch_base);
- if (IS_ERR(priv->hw_addr)) {
- dev_err(&pdev->dev, "Failed to ioremap switch_base!\n");
- return PTR_ERR(priv->hw_addr);
- }
-
- /*psgmii dts get*/
- psgmii_node = of_find_node_by_name(NULL, "ess-psgmii");
- if (!psgmii_node) {
- dev_err(&pdev->dev, "Failed to find ess-psgmii node!\n");
- return -EINVAL;
- }
-
- if (of_address_to_resource(psgmii_node, 0, &psgmii_base) != 0)
- return -EIO;
-
- priv->psgmii_hw_addr = devm_ioremap_resource(&pdev->dev, &psgmii_base);
- if (IS_ERR(priv->psgmii_hw_addr)) {
- dev_err(&pdev->dev, "psgmii ioremap fail!\n");
- return PTR_ERR(priv->psgmii_hw_addr);
- }
-
- mac_mode = of_get_property(switch_node, "switch_mac_mode", &len);
- if (!mac_mode) {
- dev_err(&pdev->dev, "Failed to read switch_mac_mode\n");
- return -EINVAL;
- }
- priv->mac_mode = be32_to_cpup(mac_mode);
-
- ess_clk = of_clk_get_by_name(switch_node, "ess_clk");
- if (ess_clk)
- clk_prepare_enable(ess_clk);
-
- priv->ess_rst = devm_reset_control_get(&pdev->dev, "ess_rst");
- if (IS_ERR(priv->ess_rst)) {
- dev_err(&pdev->dev, "Failed to get ess_rst control!\n");
- return PTR_ERR(priv->ess_rst);
- }
-
- if (of_property_read_u32(switch_node, "switch_cpu_bmp",
- &priv->cpu_bmp) ||
- of_property_read_u32(switch_node, "switch_lan_bmp",
- &priv->lan_bmp) ||
- of_property_read_u32(switch_node, "switch_wan_bmp",
- &priv->wan_bmp)) {
- dev_err(&pdev->dev, "Failed to read port properties\n");
- return -EIO;
- }
-
- mutex_init(&priv->reg_mutex);
- mutex_init(&priv->mib_lock);
- INIT_DELAYED_WORK(&priv->mib_work, ar40xx_mib_work_func);
-
- /* register switch */
- swdev = &priv->dev;
-
- mdio_node = of_find_compatible_node(NULL, NULL, "qcom,ipq4019-mdio");
- if (!mdio_node) {
- dev_err(&pdev->dev, "Probe failed - Cannot find mdio node by phandle!\n");
- ret = -ENODEV;
- goto err_missing_phy;
- }
-
- priv->mii_bus = of_mdio_find_bus(mdio_node);
-
- if (priv->mii_bus == NULL) {
- dev_err(&pdev->dev, "Probe failed - Missing PHYs!\n");
- ret = -ENODEV;
- goto err_missing_phy;
- }
-
- swdev->alias = dev_name(&priv->mii_bus->dev);
-
- swdev->cpu_port = AR40XX_PORT_CPU;
- swdev->name = "QCA AR40xx";
- swdev->vlans = AR40XX_MAX_VLANS;
- swdev->ports = AR40XX_NUM_PORTS;
- swdev->ops = &ar40xx_sw_ops;
- ret = register_switch(swdev, NULL);
- if (ret < 0) {
- dev_err(&pdev->dev, "Switch registration failed!\n");
- return ret;
- }
-
- num_mibs = ARRAY_SIZE(ar40xx_mibs);
- len = priv->dev.ports * num_mibs *
- sizeof(*priv->mib_stats);
- priv->mib_stats = devm_kzalloc(&pdev->dev, len, GFP_KERNEL);
- if (!priv->mib_stats) {
- ret = -ENOMEM;
- goto err_unregister_switch;
- }
-
- ar40xx_start(priv);
-
- return 0;
-
-err_unregister_switch:
- unregister_switch(&priv->dev);
-err_missing_phy:
- platform_set_drvdata(pdev, NULL);
- return ret;
-}
-
-static int ar40xx_remove(struct platform_device *pdev)
-{
- struct ar40xx_priv *priv = platform_get_drvdata(pdev);
-
- cancel_delayed_work_sync(&priv->qm_dwork);
- cancel_delayed_work_sync(&priv->mib_work);
-
- unregister_switch(&priv->dev);
-
- return 0;
-}
-
-static const struct of_device_id ar40xx_of_mtable[] = {
- {.compatible = "qcom,ess-switch" },
- {}
-};
-
-struct platform_driver ar40xx_drv = {
- .probe = ar40xx_probe,
- .remove = ar40xx_remove,
- .driver = {
- .name = "ar40xx",
- .of_match_table = ar40xx_of_mtable,
- },
-};
-
-module_platform_driver(ar40xx_drv);
-
-MODULE_DESCRIPTION("IPQ40XX ESS driver");
-MODULE_LICENSE("Dual BSD/GPL");
diff --git a/target/linux/ipq40xx/files/drivers/net/mdio/ar40xx.h b/target/linux/ipq40xx/files/drivers/net/mdio/ar40xx.h
deleted file mode 100644
index 7ba40ccf75..0000000000
--- a/target/linux/ipq40xx/files/drivers/net/mdio/ar40xx.h
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- *
- * Permission to use, copy, modify, and/or distribute this software for
- * any purpose with or without fee is hereby granted, provided that the
- * above copyright notice and this permission notice appear in all copies.
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
- * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
- #ifndef __AR40XX_H
-#define __AR40XX_H
-
-#define AR40XX_MAX_VLANS 128
-#define AR40XX_NUM_PORTS 6
-#define AR40XX_NUM_PHYS 5
-
-#define BITS(_s, _n) (((1UL << (_n)) - 1) << _s)
-
-struct ar40xx_priv {
- struct switch_dev dev;
-
- u8 __iomem *hw_addr;
- u8 __iomem *psgmii_hw_addr;
- u32 mac_mode;
- struct reset_control *ess_rst;
- u32 cpu_bmp;
- u32 lan_bmp;
- u32 wan_bmp;
-
- struct mii_bus *mii_bus;
- struct phy_device *phy;
-
- /* mutex for qm task */
- struct mutex qm_lock;
- struct delayed_work qm_dwork;
- u32 port_link_up[AR40XX_NUM_PORTS];
- u32 ar40xx_port_old_link[AR40XX_NUM_PORTS];
- u32 ar40xx_port_qm_buf[AR40XX_NUM_PORTS];
-
- u32 phy_t_status;
-
- /* mutex for switch reg access */
- struct mutex reg_mutex;
-
- /* mutex for mib task */
- struct mutex mib_lock;
- struct delayed_work mib_work;
- int mib_next_port;
- u64 *mib_stats;
-
- char buf[2048];
-
- /* all fields below will be cleared on reset */
- bool vlan;
- u16 vlan_id[AR40XX_MAX_VLANS];
- u8 vlan_table[AR40XX_MAX_VLANS];
- u8 vlan_tagged;
- u16 pvid[AR40XX_NUM_PORTS];
-
- /* mirror */
- bool mirror_rx;
- bool mirror_tx;
- int source_port;
- int monitor_port;
-};
-
-#define AR40XX_PORT_LINK_UP 1
-#define AR40XX_PORT_LINK_DOWN 0
-#define AR40XX_QM_NOT_EMPTY 1
-#define AR40XX_QM_EMPTY 0
-
-#define AR40XX_LAN_VLAN 1
-#define AR40XX_WAN_VLAN 2
-
-enum ar40xx_port_wrapper_cfg {
- PORT_WRAPPER_PSGMII = 0,
-};
-
-struct ar40xx_mib_desc {
- u32 size;
- u32 offset;
- const char *name;
-};
-
-#define AR40XX_PORT_CPU 0
-
-#define AR40XX_PSGMII_MODE_CONTROL 0x1b4
-#define AR40XX_PSGMII_ATHR_CSCO_MODE_25M BIT(0)
-
-#define AR40XX_PSGMIIPHY_TX_CONTROL 0x288
-
-#define AR40XX_MII_ATH_MMD_ADDR 0x0d
-#define AR40XX_MII_ATH_MMD_DATA 0x0e
-#define AR40XX_MII_ATH_DBG_ADDR 0x1d
-#define AR40XX_MII_ATH_DBG_DATA 0x1e
-
-#define AR40XX_STATS_RXBROAD 0x00
-#define AR40XX_STATS_RXPAUSE 0x04
-#define AR40XX_STATS_RXMULTI 0x08
-#define AR40XX_STATS_RXFCSERR 0x0c
-#define AR40XX_STATS_RXALIGNERR 0x10
-#define AR40XX_STATS_RXRUNT 0x14
-#define AR40XX_STATS_RXFRAGMENT 0x18
-#define AR40XX_STATS_RX64BYTE 0x1c
-#define AR40XX_STATS_RX128BYTE 0x20
-#define AR40XX_STATS_RX256BYTE 0x24
-#define AR40XX_STATS_RX512BYTE 0x28
-#define AR40XX_STATS_RX1024BYTE 0x2c
-#define AR40XX_STATS_RX1518BYTE 0x30
-#define AR40XX_STATS_RXMAXBYTE 0x34
-#define AR40XX_STATS_RXTOOLONG 0x38
-#define AR40XX_STATS_RXGOODBYTE 0x3c
-#define AR40XX_STATS_RXBADBYTE 0x44
-#define AR40XX_STATS_RXOVERFLOW 0x4c
-#define AR40XX_STATS_FILTERED 0x50
-#define AR40XX_STATS_TXBROAD 0x54
-#define AR40XX_STATS_TXPAUSE 0x58
-#define AR40XX_STATS_TXMULTI 0x5c
-#define AR40XX_STATS_TXUNDERRUN 0x60
-#define AR40XX_STATS_TX64BYTE 0x64
-#define AR40XX_STATS_TX128BYTE 0x68
-#define AR40XX_STATS_TX256BYTE 0x6c
-#define AR40XX_STATS_TX512BYTE 0x70
-#define AR40XX_STATS_TX1024BYTE 0x74
-#define AR40XX_STATS_TX1518BYTE 0x78
-#define AR40XX_STATS_TXMAXBYTE 0x7c
-#define AR40XX_STATS_TXOVERSIZE 0x80
-#define AR40XX_STATS_TXBYTE 0x84
-#define AR40XX_STATS_TXCOLLISION 0x8c
-#define AR40XX_STATS_TXABORTCOL 0x90
-#define AR40XX_STATS_TXMULTICOL 0x94
-#define AR40XX_STATS_TXSINGLECOL 0x98
-#define AR40XX_STATS_TXEXCDEFER 0x9c
-#define AR40XX_STATS_TXDEFER 0xa0
-#define AR40XX_STATS_TXLATECOL 0xa4
-
-#define AR40XX_REG_MODULE_EN 0x030
-#define AR40XX_MODULE_EN_MIB BIT(0)
-
-#define AR40XX_REG_MIB_FUNC 0x034
-#define AR40XX_MIB_BUSY BIT(17)
-#define AR40XX_MIB_CPU_KEEP BIT(20)
-#define AR40XX_MIB_FUNC BITS(24, 3)
-#define AR40XX_MIB_FUNC_S 24
-#define AR40XX_MIB_FUNC_NO_OP 0x0
-#define AR40XX_MIB_FUNC_FLUSH 0x1
-
-#define AR40XX_ESS_SERVICE_TAG 0x48
-#define AR40XX_ESS_SERVICE_TAG_STAG BIT(17)
-
-#define AR40XX_REG_PORT_STATUS(_i) (0x07c + (_i) * 4)
-#define AR40XX_PORT_SPEED BITS(0, 2)
-#define AR40XX_PORT_STATUS_SPEED_S 0
-#define AR40XX_PORT_TX_EN BIT(2)
-#define AR40XX_PORT_RX_EN BIT(3)
-#define AR40XX_PORT_STATUS_TXFLOW BIT(4)
-#define AR40XX_PORT_STATUS_RXFLOW BIT(5)
-#define AR40XX_PORT_DUPLEX BIT(6)
-#define AR40XX_PORT_TXHALF_FLOW BIT(7)
-#define AR40XX_PORT_STATUS_LINK_UP BIT(8)
-#define AR40XX_PORT_AUTO_LINK_EN BIT(9)
-#define AR40XX_PORT_STATUS_FLOW_CONTROL BIT(12)
-
-#define AR40XX_REG_MAX_FRAME_SIZE 0x078
-#define AR40XX_MAX_FRAME_SIZE_MTU BITS(0, 14)
-
-#define AR40XX_REG_PORT_HEADER(_i) (0x09c + (_i) * 4)
-
-#define AR40XX_REG_EEE_CTRL 0x100
-#define AR40XX_EEE_CTRL_DISABLE_PHY(_i) BIT(4 + (_i) * 2)
-
-#define AR40XX_REG_PORT_VLAN0(_i) (0x420 + (_i) * 0x8)
-#define AR40XX_PORT_VLAN0_DEF_SVID BITS(0, 12)
-#define AR40XX_PORT_VLAN0_DEF_SVID_S 0
-#define AR40XX_PORT_VLAN0_DEF_CVID BITS(16, 12)
-#define AR40XX_PORT_VLAN0_DEF_CVID_S 16
-
-#define AR40XX_REG_PORT_VLAN1(_i) (0x424 + (_i) * 0x8)
-#define AR40XX_PORT_VLAN1_CORE_PORT BIT(9)
-#define AR40XX_PORT_VLAN1_PORT_TLS_MODE BIT(7)
-#define AR40XX_PORT_VLAN1_PORT_VLAN_PROP BIT(6)
-#define AR40XX_PORT_VLAN1_OUT_MODE BITS(12, 2)
-#define AR40XX_PORT_VLAN1_OUT_MODE_S 12
-#define AR40XX_PORT_VLAN1_OUT_MODE_UNMOD 0
-#define AR40XX_PORT_VLAN1_OUT_MODE_UNTAG 1
-#define AR40XX_PORT_VLAN1_OUT_MODE_TAG 2
-#define AR40XX_PORT_VLAN1_OUT_MODE_UNTOUCH 3
-
-#define AR40XX_REG_VTU_FUNC0 0x0610
-#define AR40XX_VTU_FUNC0_EG_MODE BITS(4, 14)
-#define AR40XX_VTU_FUNC0_EG_MODE_S(_i) (4 + (_i) * 2)
-#define AR40XX_VTU_FUNC0_EG_MODE_KEEP 0
-#define AR40XX_VTU_FUNC0_EG_MODE_UNTAG 1
-#define AR40XX_VTU_FUNC0_EG_MODE_TAG 2
-#define AR40XX_VTU_FUNC0_EG_MODE_NOT 3
-#define AR40XX_VTU_FUNC0_IVL BIT(19)
-#define AR40XX_VTU_FUNC0_VALID BIT(20)
-
-#define AR40XX_REG_VTU_FUNC1 0x0614
-#define AR40XX_VTU_FUNC1_OP BITS(0, 3)
-#define AR40XX_VTU_FUNC1_OP_NOOP 0
-#define AR40XX_VTU_FUNC1_OP_FLUSH 1
-#define AR40XX_VTU_FUNC1_OP_LOAD 2
-#define AR40XX_VTU_FUNC1_OP_PURGE 3
-#define AR40XX_VTU_FUNC1_OP_REMOVE_PORT 4
-#define AR40XX_VTU_FUNC1_OP_GET_NEXT 5
-#define AR40XX7_VTU_FUNC1_OP_GET_ONE 6
-#define AR40XX_VTU_FUNC1_FULL BIT(4)
-#define AR40XX_VTU_FUNC1_PORT BIT(8, 4)
-#define AR40XX_VTU_FUNC1_PORT_S 8
-#define AR40XX_VTU_FUNC1_VID BIT(16, 12)
-#define AR40XX_VTU_FUNC1_VID_S 16
-#define AR40XX_VTU_FUNC1_BUSY BIT(31)
-
-#define AR40XX_REG_FWD_CTRL0 0x620
-#define AR40XX_FWD_CTRL0_CPU_PORT_EN BIT(10)
-#define AR40XX_FWD_CTRL0_MIRROR_PORT BITS(4, 4)
-#define AR40XX_FWD_CTRL0_MIRROR_PORT_S 4
-
-#define AR40XX_REG_FWD_CTRL1 0x624
-#define AR40XX_FWD_CTRL1_UC_FLOOD BITS(0, 7)
-#define AR40XX_FWD_CTRL1_UC_FLOOD_S 0
-#define AR40XX_FWD_CTRL1_MC_FLOOD BITS(8, 7)
-#define AR40XX_FWD_CTRL1_MC_FLOOD_S 8
-#define AR40XX_FWD_CTRL1_BC_FLOOD BITS(16, 7)
-#define AR40XX_FWD_CTRL1_BC_FLOOD_S 16
-#define AR40XX_FWD_CTRL1_IGMP BITS(24, 7)
-#define AR40XX_FWD_CTRL1_IGMP_S 24
-
-#define AR40XX_REG_PORT_LOOKUP(_i) (0x660 + (_i) * 0xc)
-#define AR40XX_PORT_LOOKUP_MEMBER BITS(0, 7)
-#define AR40XX_PORT_LOOKUP_IN_MODE BITS(8, 2)
-#define AR40XX_PORT_LOOKUP_IN_MODE_S 8
-#define AR40XX_PORT_LOOKUP_STATE BITS(16, 3)
-#define AR40XX_PORT_LOOKUP_STATE_S 16
-#define AR40XX_PORT_LOOKUP_LEARN BIT(20)
-#define AR40XX_PORT_LOOKUP_LOOPBACK BIT(21)
-#define AR40XX_PORT_LOOKUP_ING_MIRROR_EN BIT(25)
-
-#define AR40XX_REG_ATU_FUNC 0x60c
-#define AR40XX_ATU_FUNC_OP BITS(0, 4)
-#define AR40XX_ATU_FUNC_OP_NOOP 0x0
-#define AR40XX_ATU_FUNC_OP_FLUSH 0x1
-#define AR40XX_ATU_FUNC_OP_LOAD 0x2
-#define AR40XX_ATU_FUNC_OP_PURGE 0x3
-#define AR40XX_ATU_FUNC_OP_FLUSH_LOCKED 0x4
-#define AR40XX_ATU_FUNC_OP_FLUSH_UNICAST 0x5
-#define AR40XX_ATU_FUNC_OP_GET_NEXT 0x6
-#define AR40XX_ATU_FUNC_OP_SEARCH_MAC 0x7
-#define AR40XX_ATU_FUNC_OP_CHANGE_TRUNK 0x8
-#define AR40XX_ATU_FUNC_BUSY BIT(31)
-
-#define AR40XX_REG_QM_DEBUG_ADDR 0x820
-#define AR40XX_REG_QM_DEBUG_VALUE 0x824
-#define AR40XX_REG_QM_PORT0_3_QNUM 0x1d
-#define AR40XX_REG_QM_PORT4_6_QNUM 0x1e
-
-#define AR40XX_REG_PORT_HOL_CTRL1(_i) (0x974 + (_i) * 0x8)
-#define AR40XX_PORT_HOL_CTRL1_EG_MIRROR_EN BIT(16)
-
-#define AR40XX_REG_PORT_FLOWCTRL_THRESH(_i) (0x9b0 + (_i) * 0x4)
-#define AR40XX_PORT0_FC_THRESH_ON_DFLT 0x60
-#define AR40XX_PORT0_FC_THRESH_OFF_DFLT 0x90
-
-#define AR40XX_PHY_DEBUG_0 0
-#define AR40XX_PHY_MANU_CTRL_EN BIT(12)
-
-#define AR40XX_PHY_DEBUG_2 2
-
-#define AR40XX_PHY_SPEC_STATUS 0x11
-#define AR40XX_PHY_SPEC_STATUS_LINK BIT(10)
-#define AR40XX_PHY_SPEC_STATUS_DUPLEX BIT(13)
-#define AR40XX_PHY_SPEC_STATUS_SPEED BITS(14, 2)
-
-/* port forwarding state */
-enum {
- AR40XX_PORT_STATE_DISABLED = 0,
- AR40XX_PORT_STATE_BLOCK = 1,
- AR40XX_PORT_STATE_LISTEN = 2,
- AR40XX_PORT_STATE_LEARN = 3,
- AR40XX_PORT_STATE_FORWARD = 4
-};
-
-/* ingress 802.1q mode */
-enum {
- AR40XX_IN_PORT_ONLY = 0,
- AR40XX_IN_PORT_FALLBACK = 1,
- AR40XX_IN_VLAN_ONLY = 2,
- AR40XX_IN_SECURE = 3
-};
-
-/* egress 802.1q mode */
-enum {
- AR40XX_OUT_KEEP = 0,
- AR40XX_OUT_STRIP_VLAN = 1,
- AR40XX_OUT_ADD_VLAN = 2
-};
-
-/* port speed */
-enum {
- AR40XX_PORT_SPEED_10M = 0,
- AR40XX_PORT_SPEED_100M = 1,
- AR40XX_PORT_SPEED_1000M = 2,
- AR40XX_PORT_SPEED_ERR = 3,
-};
-
-#define AR40XX_MIB_WORK_DELAY 2000 /* msecs */
-
-#define AR40XX_QM_WORK_DELAY 100
-
-#define AR40XX_MIB_FUNC_CAPTURE 0x3
-
-#define AR40XX_REG_PORT_STATS_START 0x1000
-#define AR40XX_REG_PORT_STATS_LEN 0x100
-
-#define AR40XX_PORTS_ALL 0x3f
-
-#define AR40XX_PSGMII_ID 5
-#define AR40XX_PSGMII_CALB_NUM 100
-#define AR40XX_MALIBU_PSGMII_MODE_CTRL 0x6d
-#define AR40XX_MALIBU_PHY_PSGMII_MODE_CTRL_ADJUST_VAL 0x220c
-#define AR40XX_MALIBU_PHY_MMD7_DAC_CTRL 0x801a
-#define AR40XX_MALIBU_DAC_CTRL_MASK 0x380
-#define AR40XX_MALIBU_DAC_CTRL_VALUE 0x280
-#define AR40XX_MALIBU_PHY_RLP_CTRL 0x805a
-#define AR40XX_PSGMII_TX_DRIVER_1_CTRL 0xb
-#define AR40XX_MALIBU_PHY_PSGMII_REDUCE_SERDES_TX_AMP 0x8a
-#define AR40XX_MALIBU_PHY_LAST_ADDR 4
-
-static inline struct ar40xx_priv *
-swdev_to_ar40xx(struct switch_dev *swdev)
-{
- return container_of(swdev, struct ar40xx_priv, dev);
-}
-
-#endif
diff --git a/target/linux/ipq40xx/patches-5.10/702-dts-ipq4019-add-PHY-switch-nodes.patch b/target/linux/ipq40xx/patches-5.10/702-dts-ipq4019-add-PHY-switch-nodes.patch
deleted file mode 100644
index d95e75107b..0000000000
--- a/target/linux/ipq40xx/patches-5.10/702-dts-ipq4019-add-PHY-switch-nodes.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 9deeec35dd3b628b95624e41d4e04acf728991ba Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey at gmail.com>
-Date: Sun, 20 Nov 2016 02:20:54 +0100
-Subject: [PATCH] dts: ipq4019: add PHY/switch nodes
-
-This patch adds both the "qcom,ess-switch" and "qcom,ess-psgmii"
-nodes which are needed for the ar40xx.c driver to initialize the
-switch.
-
-Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 23 +++++++++++++++++++++++
- 1 file changed, 23 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -617,6 +617,29 @@
- };
- };
-
-+ ess-switch at c000000 {
-+ compatible = "qcom,ess-switch";
-+ reg = <0xc000000 0x80000>;
-+ switch_access_mode = "local bus";
-+ resets = <&gcc ESS_RESET>;
-+ reset-names = "ess_rst";
-+ clocks = <&gcc GCC_ESS_CLK>;
-+ clock-names = "ess_clk";
-+ switch_cpu_bmp = <0x1>;
-+ switch_lan_bmp = <0x1e>;
-+ switch_wan_bmp = <0x20>;
-+ switch_mac_mode = <0>; /* PORT_WRAPPER_PSGMII */
-+ switch_initvlas = <0x7c 0x54>;
-+ status = "disabled";
-+ };
-+
-+ ess-psgmii at 98000 {
-+ compatible = "qcom,ess-psgmii";
-+ reg = <0x98000 0x800>;
-+ psgmii_access_mode = "local bus";
-+ status = "disabled";
-+ };
-+
- usb3_ss_phy: ssphy at 9a000 {
- compatible = "qcom,usb-ss-ipq4019-phy";
- #phy-cells = <0>;
diff --git a/target/linux/ipq40xx/patches-5.10/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch b/target/linux/ipq40xx/patches-5.10/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch
deleted file mode 100644
index 739a603b07..0000000000
--- a/target/linux/ipq40xx/patches-5.10/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 7c129254adb1093d10a62ed7bf7b956fcc6ffe34 Mon Sep 17 00:00:00 2001
-From: Rakesh Nair <ranair at codeaurora.org>
-Date: Wed, 20 Jul 2016 15:02:01 +0530
-Subject: [PATCH] net: IPQ4019 needs rfs/vlan_tag callbacks in
- netdev_ops
-
-Add callback support to get default vlan tag and register
-receive flow steering filter.
-
-Used by IPQ4019 ess-edma driver.
-
-BUG=chrome-os-partner:33096
-TEST=none
-
-Change-Id: I266070e4a0fbe4a0d9966fe79a71e50ec4f26c75
-Signed-off-by: Rakesh Nair <ranair at codeaurora.org>
-Reviewed-on: https://chromium-review.googlesource.com/362203
-Commit-Ready: Grant Grundler <grundler at chromium.org>
-Tested-by: Grant Grundler <grundler at chromium.org>
-Reviewed-by: Grant Grundler <grundler at chromium.org>
----
- include/linux/netdevice.h | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -779,6 +779,16 @@ struct xps_map {
- #define XPS_MIN_MAP_ALLOC ((L1_CACHE_ALIGN(offsetof(struct xps_map, queues[1])) \
- - sizeof(struct xps_map)) / sizeof(u16))
-
-+#ifdef CONFIG_RFS_ACCEL
-+typedef int (*set_rfs_filter_callback_t)(struct net_device *dev,
-+ __be32 src,
-+ __be32 dst,
-+ __be16 sport,
-+ __be16 dport,
-+ u8 proto,
-+ u16 rxq_index,
-+ u32 action);
-+#endif
- /*
- * This structure holds all XPS maps for device. Maps are indexed by CPU.
- */
-@@ -1466,6 +1476,9 @@ struct net_device_ops {
- const struct sk_buff *skb,
- u16 rxq_index,
- u32 flow_id);
-+ int (*ndo_register_rfs_filter)(struct net_device *dev,
-+ set_rfs_filter_callback_t set_filter);
-+ int (*ndo_get_default_vlan_tag)(struct net_device *net);
- #endif
- int (*ndo_add_slave)(struct net_device *dev,
- struct net_device *slave_dev,
diff --git a/target/linux/ipq40xx/patches-5.10/705-net-add-qualcomm-ar40xx-phy.patch b/target/linux/ipq40xx/patches-5.10/705-net-add-qualcomm-ar40xx-phy.patch
deleted file mode 100644
index cd0b10c6c8..0000000000
--- a/target/linux/ipq40xx/patches-5.10/705-net-add-qualcomm-ar40xx-phy.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/net/mdio/Kconfig
-+++ b/drivers/net/mdio/Kconfig
-@@ -27,6 +27,13 @@ config OF_MDIO
- help
- OpenFirmware MDIO bus (Ethernet PHY) accessors
-
-+config AR40XX_PHY
-+ tristate "Driver for Qualcomm Atheros IPQ40XX switches"
-+ depends on HAS_IOMEM && OF && OF_MDIO
-+ select SWCONFIG
-+ help
-+ This is the driver for Qualcomm Atheros IPQ40XX ESS switches.
-+
- if MDIO_BUS
-
- config MDIO_DEVRES
---- a/drivers/net/mdio/Makefile
-+++ b/drivers/net/mdio/Makefile
-@@ -21,6 +21,8 @@ obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.
- obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
- obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
-
-+obj-$(CONFIG_AR40XX_PHY) += ar40xx.o
-+
- obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
- obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o
- obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
diff --git a/target/linux/ipq40xx/patches-5.10/710-net-add-qualcomm-essedma-ethernet-driver.patch b/target/linux/ipq40xx/patches-5.10/710-net-add-qualcomm-essedma-ethernet-driver.patch
deleted file mode 100644
index 793ce72142..0000000000
--- a/target/linux/ipq40xx/patches-5.10/710-net-add-qualcomm-essedma-ethernet-driver.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 12e9319da1adacac92930c899c99f0e1970cac11 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey at googlemail.com>
-Date: Thu, 19 Jan 2017 02:01:31 +0100
-Subject: [PATCH 33/38] NET: add qualcomm essedma ethernet driver
-
-Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
----
- drivers/net/ethernet/qualcomm/Kconfig | 9 +++++++++
- drivers/net/ethernet/qualcomm/Makefile | 1 +
- 2 files changed, 10 insertions(+)
-
---- a/drivers/net/ethernet/qualcomm/Kconfig
-+++ b/drivers/net/ethernet/qualcomm/Kconfig
-@@ -62,4 +62,14 @@ config QCOM_EMAC
-
- source "drivers/net/ethernet/qualcomm/rmnet/Kconfig"
-
-+config ESSEDMA
-+ tristate "Qualcomm Atheros ESS Edma support"
-+ depends on OF_MDIO
-+ help
-+ This driver supports ethernet edma adapter.
-+ Say Y to build this driver.
-+
-+ To compile this driver as a module, choose M here. The module
-+ will be called essedma.ko.
-+
- endif # NET_VENDOR_QUALCOMM
---- a/drivers/net/ethernet/qualcomm/Makefile
-+++ b/drivers/net/ethernet/qualcomm/Makefile
-@@ -10,5 +10,6 @@ obj-$(CONFIG_QCA7000_UART) += qcauart.o
- qcauart-objs := qca_uart.o
-
- obj-y += emac/
-+obj-$(CONFIG_ESSEDMA) += essedma/
-
- obj-$(CONFIG_RMNET) += rmnet/
diff --git a/target/linux/ipq40xx/patches-5.10/711-dts-ipq4019-add-ethernet-essedma-node.patch b/target/linux/ipq40xx/patches-5.10/711-dts-ipq4019-add-ethernet-essedma-node.patch
deleted file mode 100644
index 3567eb7810..0000000000
--- a/target/linux/ipq40xx/patches-5.10/711-dts-ipq4019-add-ethernet-essedma-node.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From c611d3780fa101662a822d10acf8feb04ca97409 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey at gmail.com>
-Date: Sun, 20 Nov 2016 01:01:10 +0100
-Subject: [PATCH] dts: ipq4019: add ethernet essedma node
-
-This patch adds the device-tree node for the ethernet
-interfaces.
-
-Note: The driver isn't anywhere close to be upstream,
-so the info might change.
-
-Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 60 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -39,6 +39,8 @@
- spi1 = &blsp1_spi2;
- i2c0 = &blsp1_i2c3;
- i2c1 = &blsp1_i2c4;
-+ ethernet0 = &gmac0;
-+ ethernet1 = &gmac1;
- };
-
- cpus {
-@@ -658,6 +660,64 @@
- status = "disabled";
- };
-
-+ edma at c080000 {
-+ compatible = "qcom,ess-edma";
-+ reg = <0xc080000 0x8000>;
-+ qcom,page-mode = <0>;
-+ qcom,rx_head_buf_size = <1540>;
-+ qcom,mdio_supported;
-+ qcom,poll_required = <1>;
-+ qcom,num_gmac = <2>;
-+ interrupts = <0 65 IRQ_TYPE_EDGE_RISING
-+ 0 66 IRQ_TYPE_EDGE_RISING
-+ 0 67 IRQ_TYPE_EDGE_RISING
-+ 0 68 IRQ_TYPE_EDGE_RISING
-+ 0 69 IRQ_TYPE_EDGE_RISING
-+ 0 70 IRQ_TYPE_EDGE_RISING
-+ 0 71 IRQ_TYPE_EDGE_RISING
-+ 0 72 IRQ_TYPE_EDGE_RISING
-+ 0 73 IRQ_TYPE_EDGE_RISING
-+ 0 74 IRQ_TYPE_EDGE_RISING
-+ 0 75 IRQ_TYPE_EDGE_RISING
-+ 0 76 IRQ_TYPE_EDGE_RISING
-+ 0 77 IRQ_TYPE_EDGE_RISING
-+ 0 78 IRQ_TYPE_EDGE_RISING
-+ 0 79 IRQ_TYPE_EDGE_RISING
-+ 0 80 IRQ_TYPE_EDGE_RISING
-+ 0 240 IRQ_TYPE_EDGE_RISING
-+ 0 241 IRQ_TYPE_EDGE_RISING
-+ 0 242 IRQ_TYPE_EDGE_RISING
-+ 0 243 IRQ_TYPE_EDGE_RISING
-+ 0 244 IRQ_TYPE_EDGE_RISING
-+ 0 245 IRQ_TYPE_EDGE_RISING
-+ 0 246 IRQ_TYPE_EDGE_RISING
-+ 0 247 IRQ_TYPE_EDGE_RISING
-+ 0 248 IRQ_TYPE_EDGE_RISING
-+ 0 249 IRQ_TYPE_EDGE_RISING
-+ 0 250 IRQ_TYPE_EDGE_RISING
-+ 0 251 IRQ_TYPE_EDGE_RISING
-+ 0 252 IRQ_TYPE_EDGE_RISING
-+ 0 253 IRQ_TYPE_EDGE_RISING
-+ 0 254 IRQ_TYPE_EDGE_RISING
-+ 0 255 IRQ_TYPE_EDGE_RISING>;
-+
-+ status = "disabled";
-+
-+ gmac0: gmac0 {
-+ local-mac-address = [00 00 00 00 00 00];
-+ vlan_tag = <1 0x1f>;
-+ };
-+
-+ gmac1: gmac1 {
-+ local-mac-address = [00 00 00 00 00 00];
-+ qcom,phy_mdio_addr = <4>;
-+ qcom,poll_required = <1>;
-+ qcom,forced_speed = <1000>;
-+ qcom,forced_duplex = <1>;
-+ vlan_tag = <2 0x20>;
-+ };
-+ };
-+
- usb3_ss_phy: ssphy at 9a000 {
- compatible = "qcom,usb-ss-ipq4019-phy";
- #phy-cells = <0>;
diff --git a/target/linux/ipq40xx/patches-5.15/702-dts-ipq4019-add-PHY-switch-nodes.patch b/target/linux/ipq40xx/patches-5.15/702-dts-ipq4019-add-PHY-switch-nodes.patch
deleted file mode 100644
index d95e75107b..0000000000
--- a/target/linux/ipq40xx/patches-5.15/702-dts-ipq4019-add-PHY-switch-nodes.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 9deeec35dd3b628b95624e41d4e04acf728991ba Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey at gmail.com>
-Date: Sun, 20 Nov 2016 02:20:54 +0100
-Subject: [PATCH] dts: ipq4019: add PHY/switch nodes
-
-This patch adds both the "qcom,ess-switch" and "qcom,ess-psgmii"
-nodes which are needed for the ar40xx.c driver to initialize the
-switch.
-
-Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 23 +++++++++++++++++++++++
- 1 file changed, 23 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -617,6 +617,29 @@
- };
- };
-
-+ ess-switch at c000000 {
-+ compatible = "qcom,ess-switch";
-+ reg = <0xc000000 0x80000>;
-+ switch_access_mode = "local bus";
-+ resets = <&gcc ESS_RESET>;
-+ reset-names = "ess_rst";
-+ clocks = <&gcc GCC_ESS_CLK>;
-+ clock-names = "ess_clk";
-+ switch_cpu_bmp = <0x1>;
-+ switch_lan_bmp = <0x1e>;
-+ switch_wan_bmp = <0x20>;
-+ switch_mac_mode = <0>; /* PORT_WRAPPER_PSGMII */
-+ switch_initvlas = <0x7c 0x54>;
-+ status = "disabled";
-+ };
-+
-+ ess-psgmii at 98000 {
-+ compatible = "qcom,ess-psgmii";
-+ reg = <0x98000 0x800>;
-+ psgmii_access_mode = "local bus";
-+ status = "disabled";
-+ };
-+
- usb3_ss_phy: ssphy at 9a000 {
- compatible = "qcom,usb-ss-ipq4019-phy";
- #phy-cells = <0>;
diff --git a/target/linux/ipq40xx/patches-5.15/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch b/target/linux/ipq40xx/patches-5.15/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch
deleted file mode 100644
index efc35712c8..0000000000
--- a/target/linux/ipq40xx/patches-5.15/703-net-IPQ4019-needs-rfs-vlan_tag-callbacks-in.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From 7c129254adb1093d10a62ed7bf7b956fcc6ffe34 Mon Sep 17 00:00:00 2001
-From: Rakesh Nair <ranair at codeaurora.org>
-Date: Wed, 20 Jul 2016 15:02:01 +0530
-Subject: [PATCH] net: IPQ4019 needs rfs/vlan_tag callbacks in
- netdev_ops
-
-Add callback support to get default vlan tag and register
-receive flow steering filter.
-
-Used by IPQ4019 ess-edma driver.
-
-BUG=chrome-os-partner:33096
-TEST=none
-
-Change-Id: I266070e4a0fbe4a0d9966fe79a71e50ec4f26c75
-Signed-off-by: Rakesh Nair <ranair at codeaurora.org>
-Reviewed-on: https://chromium-review.googlesource.com/362203
-Commit-Ready: Grant Grundler <grundler at chromium.org>
-Tested-by: Grant Grundler <grundler at chromium.org>
-Reviewed-by: Grant Grundler <grundler at chromium.org>
----
- include/linux/netdevice.h | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -785,6 +785,16 @@ struct xps_map {
- #define XPS_MIN_MAP_ALLOC ((L1_CACHE_ALIGN(offsetof(struct xps_map, queues[1])) \
- - sizeof(struct xps_map)) / sizeof(u16))
-
-+#ifdef CONFIG_RFS_ACCEL
-+typedef int (*set_rfs_filter_callback_t)(struct net_device *dev,
-+ __be32 src,
-+ __be32 dst,
-+ __be16 sport,
-+ __be16 dport,
-+ u8 proto,
-+ u16 rxq_index,
-+ u32 action);
-+#endif
- /*
- * This structure holds all XPS maps for device. Maps are indexed by CPU.
- *
-@@ -1491,6 +1501,9 @@ struct net_device_ops {
- const struct sk_buff *skb,
- u16 rxq_index,
- u32 flow_id);
-+ int (*ndo_register_rfs_filter)(struct net_device *dev,
-+ set_rfs_filter_callback_t set_filter);
-+ int (*ndo_get_default_vlan_tag)(struct net_device *net);
- #endif
- int (*ndo_add_slave)(struct net_device *dev,
- struct net_device *slave_dev,
diff --git a/target/linux/ipq40xx/patches-5.15/705-net-add-qualcomm-ar40xx-phy.patch b/target/linux/ipq40xx/patches-5.15/705-net-add-qualcomm-ar40xx-phy.patch
deleted file mode 100644
index 46d311a9b9..0000000000
--- a/target/linux/ipq40xx/patches-5.15/705-net-add-qualcomm-ar40xx-phy.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/net/mdio/Kconfig
-+++ b/drivers/net/mdio/Kconfig
-@@ -41,6 +41,13 @@ config ACPI_MDIO
- help
- ACPI MDIO bus (Ethernet PHY) accessors
-
-+config AR40XX_PHY
-+ tristate "Driver for Qualcomm Atheros IPQ40XX switches"
-+ depends on HAS_IOMEM && OF && OF_MDIO
-+ select SWCONFIG
-+ help
-+ This is the driver for Qualcomm Atheros IPQ40XX ESS switches.
-+
- if MDIO_BUS
-
- config MDIO_DEVRES
---- a/drivers/net/mdio/Makefile
-+++ b/drivers/net/mdio/Makefile
-@@ -23,6 +23,8 @@ obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.
- obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
- obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
-
-+obj-$(CONFIG_AR40XX_PHY) += ar40xx.o
-+
- obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
- obj-$(CONFIG_MDIO_BUS_MUX_BCM6368) += mdio-mux-bcm6368.o
- obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o
diff --git a/target/linux/ipq40xx/patches-5.15/710-net-add-qualcomm-essedma-ethernet-driver.patch b/target/linux/ipq40xx/patches-5.15/710-net-add-qualcomm-essedma-ethernet-driver.patch
deleted file mode 100644
index 793ce72142..0000000000
--- a/target/linux/ipq40xx/patches-5.15/710-net-add-qualcomm-essedma-ethernet-driver.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 12e9319da1adacac92930c899c99f0e1970cac11 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey at googlemail.com>
-Date: Thu, 19 Jan 2017 02:01:31 +0100
-Subject: [PATCH 33/38] NET: add qualcomm essedma ethernet driver
-
-Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
----
- drivers/net/ethernet/qualcomm/Kconfig | 9 +++++++++
- drivers/net/ethernet/qualcomm/Makefile | 1 +
- 2 files changed, 10 insertions(+)
-
---- a/drivers/net/ethernet/qualcomm/Kconfig
-+++ b/drivers/net/ethernet/qualcomm/Kconfig
-@@ -62,4 +62,14 @@ config QCOM_EMAC
-
- source "drivers/net/ethernet/qualcomm/rmnet/Kconfig"
-
-+config ESSEDMA
-+ tristate "Qualcomm Atheros ESS Edma support"
-+ depends on OF_MDIO
-+ help
-+ This driver supports ethernet edma adapter.
-+ Say Y to build this driver.
-+
-+ To compile this driver as a module, choose M here. The module
-+ will be called essedma.ko.
-+
- endif # NET_VENDOR_QUALCOMM
---- a/drivers/net/ethernet/qualcomm/Makefile
-+++ b/drivers/net/ethernet/qualcomm/Makefile
-@@ -10,5 +10,6 @@ obj-$(CONFIG_QCA7000_UART) += qcauart.o
- qcauart-objs := qca_uart.o
-
- obj-y += emac/
-+obj-$(CONFIG_ESSEDMA) += essedma/
-
- obj-$(CONFIG_RMNET) += rmnet/
diff --git a/target/linux/ipq40xx/patches-5.15/711-dts-ipq4019-add-ethernet-essedma-node.patch b/target/linux/ipq40xx/patches-5.15/711-dts-ipq4019-add-ethernet-essedma-node.patch
deleted file mode 100644
index 3567eb7810..0000000000
--- a/target/linux/ipq40xx/patches-5.15/711-dts-ipq4019-add-ethernet-essedma-node.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From c611d3780fa101662a822d10acf8feb04ca97409 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey at gmail.com>
-Date: Sun, 20 Nov 2016 01:01:10 +0100
-Subject: [PATCH] dts: ipq4019: add ethernet essedma node
-
-This patch adds the device-tree node for the ethernet
-interfaces.
-
-Note: The driver isn't anywhere close to be upstream,
-so the info might change.
-
-Signed-off-by: Christian Lamparter <chunkeey at gmail.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 60 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -39,6 +39,8 @@
- spi1 = &blsp1_spi2;
- i2c0 = &blsp1_i2c3;
- i2c1 = &blsp1_i2c4;
-+ ethernet0 = &gmac0;
-+ ethernet1 = &gmac1;
- };
-
- cpus {
-@@ -658,6 +660,64 @@
- status = "disabled";
- };
-
-+ edma at c080000 {
-+ compatible = "qcom,ess-edma";
-+ reg = <0xc080000 0x8000>;
-+ qcom,page-mode = <0>;
-+ qcom,rx_head_buf_size = <1540>;
-+ qcom,mdio_supported;
-+ qcom,poll_required = <1>;
-+ qcom,num_gmac = <2>;
-+ interrupts = <0 65 IRQ_TYPE_EDGE_RISING
-+ 0 66 IRQ_TYPE_EDGE_RISING
-+ 0 67 IRQ_TYPE_EDGE_RISING
-+ 0 68 IRQ_TYPE_EDGE_RISING
-+ 0 69 IRQ_TYPE_EDGE_RISING
-+ 0 70 IRQ_TYPE_EDGE_RISING
-+ 0 71 IRQ_TYPE_EDGE_RISING
-+ 0 72 IRQ_TYPE_EDGE_RISING
-+ 0 73 IRQ_TYPE_EDGE_RISING
-+ 0 74 IRQ_TYPE_EDGE_RISING
-+ 0 75 IRQ_TYPE_EDGE_RISING
-+ 0 76 IRQ_TYPE_EDGE_RISING
-+ 0 77 IRQ_TYPE_EDGE_RISING
-+ 0 78 IRQ_TYPE_EDGE_RISING
-+ 0 79 IRQ_TYPE_EDGE_RISING
-+ 0 80 IRQ_TYPE_EDGE_RISING
-+ 0 240 IRQ_TYPE_EDGE_RISING
-+ 0 241 IRQ_TYPE_EDGE_RISING
-+ 0 242 IRQ_TYPE_EDGE_RISING
-+ 0 243 IRQ_TYPE_EDGE_RISING
-+ 0 244 IRQ_TYPE_EDGE_RISING
-+ 0 245 IRQ_TYPE_EDGE_RISING
-+ 0 246 IRQ_TYPE_EDGE_RISING
-+ 0 247 IRQ_TYPE_EDGE_RISING
-+ 0 248 IRQ_TYPE_EDGE_RISING
-+ 0 249 IRQ_TYPE_EDGE_RISING
-+ 0 250 IRQ_TYPE_EDGE_RISING
-+ 0 251 IRQ_TYPE_EDGE_RISING
-+ 0 252 IRQ_TYPE_EDGE_RISING
-+ 0 253 IRQ_TYPE_EDGE_RISING
-+ 0 254 IRQ_TYPE_EDGE_RISING
-+ 0 255 IRQ_TYPE_EDGE_RISING>;
-+
-+ status = "disabled";
-+
-+ gmac0: gmac0 {
-+ local-mac-address = [00 00 00 00 00 00];
-+ vlan_tag = <1 0x1f>;
-+ };
-+
-+ gmac1: gmac1 {
-+ local-mac-address = [00 00 00 00 00 00];
-+ qcom,phy_mdio_addr = <4>;
-+ qcom,poll_required = <1>;
-+ qcom,forced_speed = <1000>;
-+ qcom,forced_duplex = <1>;
-+ vlan_tag = <2 0x20>;
-+ };
-+ };
-+
- usb3_ss_phy: ssphy at 9a000 {
- compatible = "qcom,usb-ss-ipq4019-phy";
- #phy-cells = <0>;
More information about the lede-commits
mailing list