[openwrt/openwrt] ipq40xx: import qca8k from generic
LEDE Commits
lede-commits at lists.infradead.org
Sun Oct 2 14:05:45 PDT 2022
blocktrron pushed a commit to openwrt/openwrt.git, branch master:
https://git.openwrt.org/28b13bb15766aa6d888718ad83fe3aebcdfd512a
commit 28b13bb15766aa6d888718ad83fe3aebcdfd512a
Author: Robert Marko <robert.marko at sartura.hr>
AuthorDate: Mon Nov 1 18:59:46 2021 +0100
ipq40xx: import qca8k from generic
This is just importing the qca8k driver from the generic target.
It will be used as the based for IPQ40xx version, this is just
to be able to see the diff.
Signed-off-by: Robert Marko <robert.marko at sartura.hr>
---
.../files/drivers/net/dsa/qca/qca8k-ipq4019.c | 2190 ++++++++++++++++++++
.../files/drivers/net/dsa/qca/qca8k-ipq4019.h | 310 +++
2 files changed, 2500 insertions(+)
diff --git a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
new file mode 100644
index 0000000000..fc8579d952
--- /dev/null
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.c
@@ -0,0 +1,2190 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2009 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg at openwrt.org>
+ * Copyright (c) 2015, 2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2016 John Crispin <john at phrozen.org>
+ */
+
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+#include <net/dsa.h>
+#include <linux/of_net.h>
+#include <linux/of_mdio.h>
+#include <linux/of_platform.h>
+#include <linux/if_bridge.h>
+#include <linux/mdio.h>
+#include <linux/phylink.h>
+#include <linux/gpio/consumer.h>
+#include <linux/etherdevice.h>
+
+#include "qca8k.h"
+
+#define MIB_DESC(_s, _o, _n) \
+ { \
+ .size = (_s), \
+ .offset = (_o), \
+ .name = (_n), \
+ }
+
+static const struct qca8k_mib_desc ar8327_mib[] = {
+ MIB_DESC(1, 0x00, "RxBroad"),
+ MIB_DESC(1, 0x04, "RxPause"),
+ MIB_DESC(1, 0x08, "RxMulti"),
+ MIB_DESC(1, 0x0c, "RxFcsErr"),
+ MIB_DESC(1, 0x10, "RxAlignErr"),
+ MIB_DESC(1, 0x14, "RxRunt"),
+ MIB_DESC(1, 0x18, "RxFragment"),
+ MIB_DESC(1, 0x1c, "Rx64Byte"),
+ MIB_DESC(1, 0x20, "Rx128Byte"),
+ MIB_DESC(1, 0x24, "Rx256Byte"),
+ MIB_DESC(1, 0x28, "Rx512Byte"),
+ MIB_DESC(1, 0x2c, "Rx1024Byte"),
+ MIB_DESC(1, 0x30, "Rx1518Byte"),
+ MIB_DESC(1, 0x34, "RxMaxByte"),
+ MIB_DESC(1, 0x38, "RxTooLong"),
+ MIB_DESC(2, 0x3c, "RxGoodByte"),
+ MIB_DESC(2, 0x44, "RxBadByte"),
+ MIB_DESC(1, 0x4c, "RxOverFlow"),
+ MIB_DESC(1, 0x50, "Filtered"),
+ MIB_DESC(1, 0x54, "TxBroad"),
+ MIB_DESC(1, 0x58, "TxPause"),
+ MIB_DESC(1, 0x5c, "TxMulti"),
+ MIB_DESC(1, 0x60, "TxUnderRun"),
+ MIB_DESC(1, 0x64, "Tx64Byte"),
+ MIB_DESC(1, 0x68, "Tx128Byte"),
+ MIB_DESC(1, 0x6c, "Tx256Byte"),
+ MIB_DESC(1, 0x70, "Tx512Byte"),
+ MIB_DESC(1, 0x74, "Tx1024Byte"),
+ MIB_DESC(1, 0x78, "Tx1518Byte"),
+ MIB_DESC(1, 0x7c, "TxMaxByte"),
+ MIB_DESC(1, 0x80, "TxOverSize"),
+ MIB_DESC(2, 0x84, "TxByte"),
+ MIB_DESC(1, 0x8c, "TxCollision"),
+ MIB_DESC(1, 0x90, "TxAbortCol"),
+ MIB_DESC(1, 0x94, "TxMultiCol"),
+ MIB_DESC(1, 0x98, "TxSingleCol"),
+ MIB_DESC(1, 0x9c, "TxExcDefer"),
+ MIB_DESC(1, 0xa0, "TxDefer"),
+ MIB_DESC(1, 0xa4, "TxLateCol"),
+};
+
+/* The 32bit switch registers are accessed indirectly. To achieve this we need
+ * to set the page of the register. Track the last page that was set to reduce
+ * mdio writes
+ */
+static u16 qca8k_current_page = 0xffff;
+
+static void
+qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
+{
+ regaddr >>= 1;
+ *r1 = regaddr & 0x1e;
+
+ regaddr >>= 5;
+ *r2 = regaddr & 0x7;
+
+ regaddr >>= 3;
+ *page = regaddr & 0x3ff;
+}
+
+static int
+qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
+{
+ int ret;
+
+ ret = bus->read(bus, phy_id, regnum);
+ if (ret >= 0) {
+ *val = ret;
+ ret = bus->read(bus, phy_id, regnum + 1);
+ *val |= ret << 16;
+ }
+
+ if (ret < 0) {
+ dev_err_ratelimited(&bus->dev,
+ "failed to read qca8k 32bit register\n");
+ *val = 0;
+ return ret;
+ }
+
+ return 0;
+}
+
+static void
+qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
+{
+ u16 lo, hi;
+ int ret;
+
+ lo = val & 0xffff;
+ hi = (u16)(val >> 16);
+
+ ret = bus->write(bus, phy_id, regnum, lo);
+ if (ret >= 0)
+ ret = bus->write(bus, phy_id, regnum + 1, hi);
+ if (ret < 0)
+ dev_err_ratelimited(&bus->dev,
+ "failed to write qca8k 32bit register\n");
+}
+
+static int
+qca8k_set_page(struct mii_bus *bus, u16 page)
+{
+ int ret;
+
+ if (page == qca8k_current_page)
+ return 0;
+
+ ret = bus->write(bus, 0x18, 0, page);
+ if (ret < 0) {
+ dev_err_ratelimited(&bus->dev,
+ "failed to set qca8k page\n");
+ return ret;
+ }
+
+ qca8k_current_page = page;
+ usleep_range(1000, 2000);
+ return 0;
+}
+
+static int
+qca8k_read(struct qca8k_priv *priv, u32 reg, u32 *val)
+{
+ struct mii_bus *bus = priv->bus;
+ u16 r1, r2, page;
+ int ret;
+
+ qca8k_split_addr(reg, &r1, &r2, &page);
+
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ ret = qca8k_set_page(bus, page);
+ if (ret < 0)
+ goto exit;
+
+ ret = qca8k_mii_read32(bus, 0x10 | r2, r1, val);
+
+exit:
+ mutex_unlock(&bus->mdio_lock);
+ return ret;
+}
+
+static int
+qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val)
+{
+ struct mii_bus *bus = priv->bus;
+ u16 r1, r2, page;
+ int ret;
+
+ qca8k_split_addr(reg, &r1, &r2, &page);
+
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ ret = qca8k_set_page(bus, page);
+ if (ret < 0)
+ goto exit;
+
+ qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+
+exit:
+ mutex_unlock(&bus->mdio_lock);
+ return ret;
+}
+
+static int
+qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val)
+{
+ struct mii_bus *bus = priv->bus;
+ u16 r1, r2, page;
+ u32 val;
+ int ret;
+
+ qca8k_split_addr(reg, &r1, &r2, &page);
+
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ ret = qca8k_set_page(bus, page);
+ if (ret < 0)
+ goto exit;
+
+ ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val);
+ if (ret < 0)
+ goto exit;
+
+ val &= ~mask;
+ val |= write_val;
+ qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+
+exit:
+ mutex_unlock(&bus->mdio_lock);
+
+ return ret;
+}
+
+static int
+qca8k_reg_set(struct qca8k_priv *priv, u32 reg, u32 val)
+{
+ return qca8k_rmw(priv, reg, 0, val);
+}
+
+static int
+qca8k_reg_clear(struct qca8k_priv *priv, u32 reg, u32 val)
+{
+ return qca8k_rmw(priv, reg, val, 0);
+}
+
+static int
+qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
+
+ return qca8k_read(priv, reg, val);
+}
+
+static int
+qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
+
+ return qca8k_write(priv, reg, val);
+}
+
+static const struct regmap_range qca8k_readable_ranges[] = {
+ regmap_reg_range(0x0000, 0x00e4), /* Global control */
+ regmap_reg_range(0x0100, 0x0168), /* EEE control */
+ regmap_reg_range(0x0200, 0x0270), /* Parser control */
+ regmap_reg_range(0x0400, 0x0454), /* ACL */
+ regmap_reg_range(0x0600, 0x0718), /* Lookup */
+ regmap_reg_range(0x0800, 0x0b70), /* QM */
+ regmap_reg_range(0x0c00, 0x0c80), /* PKT */
+ regmap_reg_range(0x0e00, 0x0e98), /* L3 */
+ regmap_reg_range(0x1000, 0x10ac), /* MIB - Port0 */
+ regmap_reg_range(0x1100, 0x11ac), /* MIB - Port1 */
+ regmap_reg_range(0x1200, 0x12ac), /* MIB - Port2 */
+ regmap_reg_range(0x1300, 0x13ac), /* MIB - Port3 */
+ regmap_reg_range(0x1400, 0x14ac), /* MIB - Port4 */
+ regmap_reg_range(0x1500, 0x15ac), /* MIB - Port5 */
+ regmap_reg_range(0x1600, 0x16ac), /* MIB - Port6 */
+
+};
+
+static const struct regmap_access_table qca8k_readable_table = {
+ .yes_ranges = qca8k_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(qca8k_readable_ranges),
+};
+
+static struct regmap_config qca8k_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 0x16ac, /* end MIB - Port6 range */
+ .reg_read = qca8k_regmap_read,
+ .reg_write = qca8k_regmap_write,
+ .rd_table = &qca8k_readable_table,
+};
+
+static int
+qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask)
+{
+ int ret, ret1;
+ u32 val;
+
+ ret = read_poll_timeout(qca8k_read, ret1, !(val & mask),
+ 0, QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false,
+ priv, reg, &val);
+
+ /* Check if qca8k_read has failed for a different reason
+ * before returning -ETIMEDOUT
+ */
+ if (ret < 0 && ret1 < 0)
+ return ret1;
+
+ return ret;
+}
+
+static int
+qca8k_fdb_read(struct qca8k_priv *priv, struct qca8k_fdb *fdb)
+{
+ u32 reg[4], val;
+ int i, ret;
+
+ /* load the ARL table into an array */
+ for (i = 0; i < 4; i++) {
+ ret = qca8k_read(priv, QCA8K_REG_ATU_DATA0 + (i * 4), &val);
+ if (ret < 0)
+ return ret;
+
+ reg[i] = val;
+ }
+
+ /* vid - 83:72 */
+ fdb->vid = (reg[2] >> QCA8K_ATU_VID_S) & QCA8K_ATU_VID_M;
+ /* aging - 67:64 */
+ fdb->aging = reg[2] & QCA8K_ATU_STATUS_M;
+ /* portmask - 54:48 */
+ fdb->port_mask = (reg[1] >> QCA8K_ATU_PORT_S) & QCA8K_ATU_PORT_M;
+ /* mac - 47:0 */
+ fdb->mac[0] = (reg[1] >> QCA8K_ATU_ADDR0_S) & 0xff;
+ fdb->mac[1] = reg[1] & 0xff;
+ fdb->mac[2] = (reg[0] >> QCA8K_ATU_ADDR2_S) & 0xff;
+ fdb->mac[3] = (reg[0] >> QCA8K_ATU_ADDR3_S) & 0xff;
+ fdb->mac[4] = (reg[0] >> QCA8K_ATU_ADDR4_S) & 0xff;
+ fdb->mac[5] = reg[0] & 0xff;
+
+ return 0;
+}
+
+static void
+qca8k_fdb_write(struct qca8k_priv *priv, u16 vid, u8 port_mask, const u8 *mac,
+ u8 aging)
+{
+ u32 reg[3] = { 0 };
+ int i;
+
+ /* vid - 83:72 */
+ reg[2] = (vid & QCA8K_ATU_VID_M) << QCA8K_ATU_VID_S;
+ /* aging - 67:64 */
+ reg[2] |= aging & QCA8K_ATU_STATUS_M;
+ /* portmask - 54:48 */
+ reg[1] = (port_mask & QCA8K_ATU_PORT_M) << QCA8K_ATU_PORT_S;
+ /* mac - 47:0 */
+ reg[1] |= mac[0] << QCA8K_ATU_ADDR0_S;
+ reg[1] |= mac[1];
+ reg[0] |= mac[2] << QCA8K_ATU_ADDR2_S;
+ reg[0] |= mac[3] << QCA8K_ATU_ADDR3_S;
+ reg[0] |= mac[4] << QCA8K_ATU_ADDR4_S;
+ reg[0] |= mac[5];
+
+ /* load the array into the ARL table */
+ for (i = 0; i < 3; i++)
+ qca8k_write(priv, QCA8K_REG_ATU_DATA0 + (i * 4), reg[i]);
+}
+
+static int
+qca8k_fdb_access(struct qca8k_priv *priv, enum qca8k_fdb_cmd cmd, int port)
+{
+ u32 reg;
+ int ret;
+
+ /* Set the command and FDB index */
+ reg = QCA8K_ATU_FUNC_BUSY;
+ reg |= cmd;
+ if (port >= 0) {
+ reg |= QCA8K_ATU_FUNC_PORT_EN;
+ reg |= (port & QCA8K_ATU_FUNC_PORT_M) << QCA8K_ATU_FUNC_PORT_S;
+ }
+
+ /* Write the function register triggering the table access */
+ ret = qca8k_write(priv, QCA8K_REG_ATU_FUNC, reg);
+ if (ret)
+ return ret;
+
+ /* wait for completion */
+ ret = qca8k_busy_wait(priv, QCA8K_REG_ATU_FUNC, QCA8K_ATU_FUNC_BUSY);
+ if (ret)
+ return ret;
+
+ /* Check for table full violation when adding an entry */
+ if (cmd == QCA8K_FDB_LOAD) {
+ ret = qca8k_read(priv, QCA8K_REG_ATU_FUNC, ®);
+ if (ret < 0)
+ return ret;
+ if (reg & QCA8K_ATU_FUNC_FULL)
+ return -1;
+ }
+
+ return 0;
+}
+
+static int
+qca8k_fdb_next(struct qca8k_priv *priv, struct qca8k_fdb *fdb, int port)
+{
+ int ret;
+
+ qca8k_fdb_write(priv, fdb->vid, fdb->port_mask, fdb->mac, fdb->aging);
+ ret = qca8k_fdb_access(priv, QCA8K_FDB_NEXT, port);
+ if (ret < 0)
+ return ret;
+
+ return qca8k_fdb_read(priv, fdb);
+}
+
+static int
+qca8k_fdb_add(struct qca8k_priv *priv, const u8 *mac, u16 port_mask,
+ u16 vid, u8 aging)
+{
+ int ret;
+
+ mutex_lock(&priv->reg_mutex);
+ qca8k_fdb_write(priv, vid, port_mask, mac, aging);
+ ret = qca8k_fdb_access(priv, QCA8K_FDB_LOAD, -1);
+ mutex_unlock(&priv->reg_mutex);
+
+ return ret;
+}
+
+static int
+qca8k_fdb_del(struct qca8k_priv *priv, const u8 *mac, u16 port_mask, u16 vid)
+{
+ int ret;
+
+ mutex_lock(&priv->reg_mutex);
+ qca8k_fdb_write(priv, vid, port_mask, mac, 0);
+ ret = qca8k_fdb_access(priv, QCA8K_FDB_PURGE, -1);
+ mutex_unlock(&priv->reg_mutex);
+
+ return ret;
+}
+
+static void
+qca8k_fdb_flush(struct qca8k_priv *priv)
+{
+ mutex_lock(&priv->reg_mutex);
+ qca8k_fdb_access(priv, QCA8K_FDB_FLUSH, -1);
+ mutex_unlock(&priv->reg_mutex);
+}
+
+static int
+qca8k_vlan_access(struct qca8k_priv *priv, enum qca8k_vlan_cmd cmd, u16 vid)
+{
+ u32 reg;
+ int ret;
+
+ /* Set the command and VLAN index */
+ reg = QCA8K_VTU_FUNC1_BUSY;
+ reg |= cmd;
+ reg |= vid << QCA8K_VTU_FUNC1_VID_S;
+
+ /* Write the function register triggering the table access */
+ ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC1, reg);
+ if (ret)
+ return ret;
+
+ /* wait for completion */
+ ret = qca8k_busy_wait(priv, QCA8K_REG_VTU_FUNC1, QCA8K_VTU_FUNC1_BUSY);
+ if (ret)
+ return ret;
+
+ /* Check for table full violation when adding an entry */
+ if (cmd == QCA8K_VLAN_LOAD) {
+ ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC1, ®);
+ if (ret < 0)
+ return ret;
+ if (reg & QCA8K_VTU_FUNC1_FULL)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int
+qca8k_vlan_add(struct qca8k_priv *priv, u8 port, u16 vid, bool untagged)
+{
+ u32 reg;
+ int ret;
+
+ /*
+ We do the right thing with VLAN 0 and treat it as untagged while
+ preserving the tag on egress.
+ */
+ if (vid == 0)
+ return 0;
+
+ mutex_lock(&priv->reg_mutex);
+ ret = qca8k_vlan_access(priv, QCA8K_VLAN_READ, vid);
+ if (ret < 0)
+ goto out;
+
+ ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC0, ®);
+ if (ret < 0)
+ goto out;
+ reg |= QCA8K_VTU_FUNC0_VALID | QCA8K_VTU_FUNC0_IVL_EN;
+ reg &= ~(QCA8K_VTU_FUNC0_EG_MODE_MASK << QCA8K_VTU_FUNC0_EG_MODE_S(port));
+ if (untagged)
+ reg |= QCA8K_VTU_FUNC0_EG_MODE_UNTAG <<
+ QCA8K_VTU_FUNC0_EG_MODE_S(port);
+ else
+ reg |= QCA8K_VTU_FUNC0_EG_MODE_TAG <<
+ QCA8K_VTU_FUNC0_EG_MODE_S(port);
+
+ ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
+ if (ret)
+ goto out;
+ ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid);
+
+out:
+ mutex_unlock(&priv->reg_mutex);
+
+ return ret;
+}
+
+static int
+qca8k_vlan_del(struct qca8k_priv *priv, u8 port, u16 vid)
+{
+ u32 reg, mask;
+ int ret, i;
+ bool del;
+
+ mutex_lock(&priv->reg_mutex);
+ ret = qca8k_vlan_access(priv, QCA8K_VLAN_READ, vid);
+ if (ret < 0)
+ goto out;
+
+ ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC0, ®);
+ if (ret < 0)
+ goto out;
+ reg &= ~(3 << QCA8K_VTU_FUNC0_EG_MODE_S(port));
+ reg |= QCA8K_VTU_FUNC0_EG_MODE_NOT <<
+ QCA8K_VTU_FUNC0_EG_MODE_S(port);
+
+ /* Check if we're the last member to be removed */
+ del = true;
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ mask = QCA8K_VTU_FUNC0_EG_MODE_NOT;
+ mask <<= QCA8K_VTU_FUNC0_EG_MODE_S(i);
+
+ if ((reg & mask) != mask) {
+ del = false;
+ break;
+ }
+ }
+
+ if (del) {
+ ret = qca8k_vlan_access(priv, QCA8K_VLAN_PURGE, vid);
+ } else {
+ ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
+ if (ret)
+ goto out;
+ ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid);
+ }
+
+out:
+ mutex_unlock(&priv->reg_mutex);
+
+ return ret;
+}
+
+static int
+qca8k_mib_init(struct qca8k_priv *priv)
+{
+ int ret;
+
+ mutex_lock(&priv->reg_mutex);
+ ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY);
+ if (ret)
+ goto exit;
+
+ ret = qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY);
+ if (ret)
+ goto exit;
+
+ ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP);
+ if (ret)
+ goto exit;
+
+ ret = qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB);
+
+exit:
+ mutex_unlock(&priv->reg_mutex);
+ return ret;
+}
+
+static void
+qca8k_port_set_status(struct qca8k_priv *priv, int port, int enable)
+{
+ u32 mask = QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC;
+
+ /* Port 0 and 6 have no internal PHY */
+ if (port > 0 && port < 6)
+ mask |= QCA8K_PORT_STATUS_LINK_AUTO;
+
+ if (enable)
+ qca8k_reg_set(priv, QCA8K_REG_PORT_STATUS(port), mask);
+ else
+ qca8k_reg_clear(priv, QCA8K_REG_PORT_STATUS(port), mask);
+}
+
+static u32
+qca8k_port_to_phy(int port)
+{
+ /* From Andrew Lunn:
+ * Port 0 has no internal phy.
+ * Port 1 has an internal PHY at MDIO address 0.
+ * Port 2 has an internal PHY at MDIO address 1.
+ * ...
+ * Port 5 has an internal PHY at MDIO address 4.
+ * Port 6 has no internal PHY.
+ */
+
+ return port - 1;
+}
+
+static int
+qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask)
+{
+ u16 r1, r2, page;
+ u32 val;
+ int ret, ret1;
+
+ qca8k_split_addr(reg, &r1, &r2, &page);
+
+ ret = read_poll_timeout(qca8k_mii_read32, ret1, !(val & mask), 0,
+ QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false,
+ bus, 0x10 | r2, r1, &val);
+
+ /* Check if qca8k_read has failed for a different reason
+ * before returnting -ETIMEDOUT
+ */
+ if (ret < 0 && ret1 < 0)
+ return ret1;
+
+ return ret;
+}
+
+static int
+qca8k_mdio_write(struct mii_bus *bus, int phy, int regnum, u16 data)
+{
+ u16 r1, r2, page;
+ u32 val;
+ int ret;
+
+ if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
+ return -EINVAL;
+
+ val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
+ QCA8K_MDIO_MASTER_WRITE | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
+ QCA8K_MDIO_MASTER_REG_ADDR(regnum) |
+ QCA8K_MDIO_MASTER_DATA(data);
+
+ qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
+
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ ret = qca8k_set_page(bus, page);
+ if (ret)
+ goto exit;
+
+ qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+
+ ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
+ QCA8K_MDIO_MASTER_BUSY);
+
+exit:
+ /* even if the busy_wait timeouts try to clear the MASTER_EN */
+ qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
+
+ mutex_unlock(&bus->mdio_lock);
+
+ return ret;
+}
+
+static int
+qca8k_mdio_read(struct mii_bus *bus, int phy, int regnum)
+{
+ u16 r1, r2, page;
+ u32 val;
+ int ret;
+
+ if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
+ return -EINVAL;
+
+ val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
+ QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
+ QCA8K_MDIO_MASTER_REG_ADDR(regnum);
+
+ qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
+
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ ret = qca8k_set_page(bus, page);
+ if (ret)
+ goto exit;
+
+ qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+
+ ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
+ QCA8K_MDIO_MASTER_BUSY);
+ if (ret)
+ goto exit;
+
+ ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val);
+
+exit:
+ /* even if the busy_wait timeouts try to clear the MASTER_EN */
+ qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
+
+ mutex_unlock(&bus->mdio_lock);
+
+ if (ret >= 0)
+ ret = val & QCA8K_MDIO_MASTER_DATA_MASK;
+
+ return ret;
+}
+
+static int
+qca8k_internal_mdio_write(struct mii_bus *slave_bus, int phy, int regnum, u16 data)
+{
+ struct qca8k_priv *priv = slave_bus->priv;
+ struct mii_bus *bus = priv->bus;
+
+ return qca8k_mdio_write(bus, phy, regnum, data);
+}
+
+static int
+qca8k_internal_mdio_read(struct mii_bus *slave_bus, int phy, int regnum)
+{
+ struct qca8k_priv *priv = slave_bus->priv;
+ struct mii_bus *bus = priv->bus;
+
+ return qca8k_mdio_read(bus, phy, regnum);
+}
+
+static int
+qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ /* Check if the legacy mapping should be used and the
+ * port is not correctly mapped to the right PHY in the
+ * devicetree
+ */
+ if (priv->legacy_phy_port_mapping)
+ port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
+
+ return qca8k_mdio_write(priv->bus, port, regnum, data);
+}
+
+static int
+qca8k_phy_read(struct dsa_switch *ds, int port, int regnum)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int ret;
+
+ /* Check if the legacy mapping should be used and the
+ * port is not correctly mapped to the right PHY in the
+ * devicetree
+ */
+ if (priv->legacy_phy_port_mapping)
+ port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
+
+ ret = qca8k_mdio_read(priv->bus, port, regnum);
+
+ if (ret < 0)
+ return 0xffff;
+
+ return ret;
+}
+
+static int
+qca8k_mdio_register(struct qca8k_priv *priv, struct device_node *mdio)
+{
+ struct dsa_switch *ds = priv->ds;
+ struct mii_bus *bus;
+
+ bus = devm_mdiobus_alloc(ds->dev);
+
+ if (!bus)
+ return -ENOMEM;
+
+ bus->priv = (void *)priv;
+ bus->name = "qca8k slave mii";
+ bus->read = qca8k_internal_mdio_read;
+ bus->write = qca8k_internal_mdio_write;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d",
+ ds->index);
+
+ bus->parent = ds->dev;
+ bus->phy_mask = ~ds->phys_mii_mask;
+
+ ds->slave_mii_bus = bus;
+
+ return devm_of_mdiobus_register(priv->dev, bus, mdio);
+}
+
+static int
+qca8k_setup_mdio_bus(struct qca8k_priv *priv)
+{
+ u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg;
+ struct device_node *ports, *port, *mdio;
+ phy_interface_t mode;
+ int err;
+
+ ports = of_get_child_by_name(priv->dev->of_node, "ports");
+ if (!ports)
+ ports = of_get_child_by_name(priv->dev->of_node, "ethernet-ports");
+
+ if (!ports)
+ return -EINVAL;
+
+ for_each_available_child_of_node(ports, port) {
+ err = of_property_read_u32(port, "reg", ®);
+ if (err) {
+ of_node_put(port);
+ of_node_put(ports);
+ return err;
+ }
+
+ if (!dsa_is_user_port(priv->ds, reg))
+ continue;
+
+ of_get_phy_mode(port, &mode);
+
+ if (of_property_read_bool(port, "phy-handle") &&
+ mode != PHY_INTERFACE_MODE_INTERNAL)
+ external_mdio_mask |= BIT(reg);
+ else
+ internal_mdio_mask |= BIT(reg);
+ }
+
+ of_node_put(ports);
+ if (!external_mdio_mask && !internal_mdio_mask) {
+ dev_err(priv->dev, "no PHYs are defined.\n");
+ return -EINVAL;
+ }
+
+ /* The QCA8K_MDIO_MASTER_EN Bit, which grants access to PHYs through
+ * the MDIO_MASTER register also _disconnects_ the external MDC
+ * passthrough to the internal PHYs. It's not possible to use both
+ * configurations at the same time!
+ *
+ * Because this came up during the review process:
+ * If the external mdio-bus driver is capable magically disabling
+ * the QCA8K_MDIO_MASTER_EN and mutex/spin-locking out the qca8k's
+ * accessors for the time being, it would be possible to pull this
+ * off.
+ */
+ if (!!external_mdio_mask && !!internal_mdio_mask) {
+ dev_err(priv->dev, "either internal or external mdio bus configuration is supported.\n");
+ return -EINVAL;
+ }
+
+ if (external_mdio_mask) {
+ /* Make sure to disable the internal mdio bus in cases
+ * a dt-overlay and driver reload changed the configuration
+ */
+
+ return qca8k_reg_clear(priv, QCA8K_MDIO_MASTER_CTRL,
+ QCA8K_MDIO_MASTER_EN);
+ }
+
+ /* Check if the devicetree declare the port:phy mapping */
+ mdio = of_get_child_by_name(priv->dev->of_node, "mdio");
+ if (of_device_is_available(mdio)) {
+ err = qca8k_mdio_register(priv, mdio);
+ if (err)
+ of_node_put(mdio);
+
+ return err;
+ }
+
+ /* If a mapping can't be found the legacy mapping is used,
+ * using the qca8k_port_to_phy function
+ */
+ priv->legacy_phy_port_mapping = true;
+ priv->ops.phy_read = qca8k_phy_read;
+ priv->ops.phy_write = qca8k_phy_write;
+
+ return 0;
+}
+
+static int
+qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv)
+{
+ u32 mask = 0;
+ int ret = 0;
+
+ /* SoC specific settings for ipq8064.
+ * If more device require this consider adding
+ * a dedicated binding.
+ */
+ if (of_machine_is_compatible("qcom,ipq8064"))
+ mask |= QCA8K_MAC_PWR_RGMII0_1_8V;
+
+ /* SoC specific settings for ipq8065 */
+ if (of_machine_is_compatible("qcom,ipq8065"))
+ mask |= QCA8K_MAC_PWR_RGMII1_1_8V;
+
+ if (mask) {
+ ret = qca8k_rmw(priv, QCA8K_REG_MAC_PWR_SEL,
+ QCA8K_MAC_PWR_RGMII0_1_8V |
+ QCA8K_MAC_PWR_RGMII1_1_8V,
+ mask);
+ }
+
+ return ret;
+}
+
+static int qca8k_find_cpu_port(struct dsa_switch *ds)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ /* Find the connected cpu port. Valid port are 0 or 6 */
+ if (dsa_is_cpu_port(ds, 0))
+ return 0;
+
+ dev_dbg(priv->dev, "port 0 is not the CPU port. Checking port 6");
+
+ if (dsa_is_cpu_port(ds, 6))
+ return 6;
+
+ return -EINVAL;
+}
+
+static int
+qca8k_setup_of_pws_reg(struct qca8k_priv *priv)
+{
+ struct device_node *node = priv->dev->of_node;
+ const struct qca8k_match_data *data;
+ u32 val = 0;
+ int ret;
+
+ /* QCA8327 require to set to the correct mode.
+ * His bigger brother QCA8328 have the 172 pin layout.
+ * Should be applied by default but we set this just to make sure.
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8327) {
+ data = of_device_get_match_data(priv->dev);
+
+ /* Set the correct package of 148 pin for QCA8327 */
+ if (data->reduced_package)
+ val |= QCA8327_PWS_PACKAGE148_EN;
+
+ ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8327_PWS_PACKAGE148_EN,
+ val);
+ if (ret)
+ return ret;
+ }
+
+ if (of_property_read_bool(node, "qca,ignore-power-on-sel"))
+ val |= QCA8K_PWS_POWER_ON_SEL;
+
+ if (of_property_read_bool(node, "qca,led-open-drain")) {
+ if (!(val & QCA8K_PWS_POWER_ON_SEL)) {
+ dev_err(priv->dev, "qca,led-open-drain require qca,ignore-power-on-sel to be set.");
+ return -EINVAL;
+ }
+
+ val |= QCA8K_PWS_LED_OPEN_EN_CSR;
+ }
+
+ return qca8k_rmw(priv, QCA8K_REG_PWS,
+ QCA8K_PWS_LED_OPEN_EN_CSR | QCA8K_PWS_POWER_ON_SEL,
+ val);
+}
+
+static int
+qca8k_parse_port_config(struct qca8k_priv *priv)
+{
+ int port, cpu_port_index = -1, ret;
+ struct device_node *port_dn;
+ phy_interface_t mode;
+ struct dsa_port *dp;
+ u32 delay;
+
+ /* We have 2 CPU port. Check them */
+ for (port = 0; port < QCA8K_NUM_PORTS && cpu_port_index < QCA8K_NUM_CPU_PORTS; port++) {
+ /* Skip every other port */
+ if (port != 0 && port != 6)
+ continue;
+
+ dp = dsa_to_port(priv->ds, port);
+ port_dn = dp->dn;
+ cpu_port_index++;
+
+ if (!of_device_is_available(port_dn))
+ continue;
+
+ ret = of_get_phy_mode(port_dn, &mode);
+ if (ret)
+ continue;
+
+ switch (mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_SGMII:
+ delay = 0;
+
+ if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay))
+ /* Switch regs accept value in ns, convert ps to ns */
+ delay = delay / 1000;
+ else if (mode == PHY_INTERFACE_MODE_RGMII_ID ||
+ mode == PHY_INTERFACE_MODE_RGMII_TXID)
+ delay = 1;
+
+ if (delay > QCA8K_MAX_DELAY) {
+ dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value");
+ delay = 3;
+ }
+
+ priv->ports_config.rgmii_tx_delay[cpu_port_index] = delay;
+
+ delay = 0;
+
+ if (!of_property_read_u32(port_dn, "rx-internal-delay-ps", &delay))
+ /* Switch regs accept value in ns, convert ps to ns */
+ delay = delay / 1000;
+ else if (mode == PHY_INTERFACE_MODE_RGMII_ID ||
+ mode == PHY_INTERFACE_MODE_RGMII_RXID)
+ delay = 2;
+
+ if (delay > QCA8K_MAX_DELAY) {
+ dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value");
+ delay = 3;
+ }
+
+ priv->ports_config.rgmii_rx_delay[cpu_port_index] = delay;
+
+ /* Skip sgmii parsing for rgmii* mode */
+ if (mode == PHY_INTERFACE_MODE_RGMII ||
+ mode == PHY_INTERFACE_MODE_RGMII_ID ||
+ mode == PHY_INTERFACE_MODE_RGMII_TXID ||
+ mode == PHY_INTERFACE_MODE_RGMII_RXID)
+ break;
+
+ if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge"))
+ priv->ports_config.sgmii_tx_clk_falling_edge = true;
+
+ if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge"))
+ priv->ports_config.sgmii_rx_clk_falling_edge = true;
+
+ if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) {
+ priv->ports_config.sgmii_enable_pll = true;
+
+ if (priv->switch_id == QCA8K_ID_QCA8327) {
+ dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling");
+ priv->ports_config.sgmii_enable_pll = false;
+ }
+
+ if (priv->switch_revision < 2)
+ dev_warn(priv->dev, "SGMII PLL should NOT be enabled for qca8337 with revision 2 or more.");
+ }
+
+ break;
+ default:
+ continue;
+ }
+ }
+
+ return 0;
+}
+
+static int
+qca8k_setup(struct dsa_switch *ds)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ int cpu_port, ret, i;
+ u32 mask;
+
+ cpu_port = qca8k_find_cpu_port(ds);
+ if (cpu_port < 0) {
+ dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6");
+ return cpu_port;
+ }
+
+ /* Parse CPU port config to be later used in phy_link mac_config */
+ ret = qca8k_parse_port_config(priv);
+ if (ret)
+ return ret;
+
+ mutex_init(&priv->reg_mutex);
+
+ /* Start by setting up the register mapping */
+ priv->regmap = devm_regmap_init(ds->dev, NULL, priv,
+ &qca8k_regmap_config);
+ if (IS_ERR(priv->regmap))
+ dev_warn(priv->dev, "regmap initialization failed");
+
+ ret = qca8k_setup_mdio_bus(priv);
+ if (ret)
+ return ret;
+
+ ret = qca8k_setup_of_pws_reg(priv);
+ if (ret)
+ return ret;
+
+ ret = qca8k_setup_mac_pwr_sel(priv);
+ if (ret)
+ return ret;
+
+ /* Enable CPU Port */
+ ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0,
+ QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
+ if (ret) {
+ dev_err(priv->dev, "failed enabling CPU port");
+ return ret;
+ }
+
+ /* Enable MIB counters */
+ ret = qca8k_mib_init(priv);
+ if (ret)
+ dev_warn(priv->dev, "mib init failed");
+
+ /* Initial setup of all ports */
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ /* Disable forwarding by default on all ports */
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ QCA8K_PORT_LOOKUP_MEMBER, 0);
+ if (ret)
+ return ret;
+
+ /* Enable QCA header mode on all cpu ports */
+ if (dsa_is_cpu_port(ds, i)) {
+ ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i),
+ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S |
+ QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S);
+ if (ret) {
+ dev_err(priv->dev, "failed enabling QCA header mode");
+ return ret;
+ }
+ }
+
+ /* Disable MAC by default on all user ports */
+ if (dsa_is_user_port(ds, i))
+ qca8k_port_set_status(priv, i, 0);
+ }
+
+ /* Forward all unknown frames to CPU port for Linux processing
+ * Notice that in multi-cpu config only one port should be set
+ * for igmp, unknown, multicast and broadcast packet
+ */
+ ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
+ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S |
+ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S |
+ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S |
+ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S);
+ if (ret)
+ return ret;
+
+ /* Setup connection between CPU port & user ports
+ * Configure specific switch configuration for ports
+ */
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ /* CPU port gets connected to all user ports of the switch */
+ if (dsa_is_cpu_port(ds, i)) {
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
+ if (ret)
+ return ret;
+ }
+
+ /* Individual user ports get connected to CPU port only */
+ if (dsa_is_user_port(ds, i)) {
+ int shift = 16 * (i % 2);
+
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ QCA8K_PORT_LOOKUP_MEMBER,
+ BIT(cpu_port));
+ if (ret)
+ return ret;
+
+ /* Enable ARP Auto-learning by default */
+ ret = qca8k_reg_set(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ QCA8K_PORT_LOOKUP_LEARN);
+ if (ret)
+ return ret;
+
+ /* For port based vlans to work we need to set the
+ * default egress vid
+ */
+ ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
+ 0xfff << shift,
+ QCA8K_PORT_VID_DEF << shift);
+ if (ret)
+ return ret;
+
+ ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
+ QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
+ QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
+ if (ret)
+ return ret;
+ }
+
+ /* The port 5 of the qca8337 have some problem in flood condition. The
+ * original legacy driver had some specific buffer and priority settings
+ * for the different port suggested by the QCA switch team. Add this
+ * missing settings to improve switch stability under load condition.
+ * This problem is limited to qca8337 and other qca8k switch are not affected.
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8337) {
+ switch (i) {
+ /* The 2 CPU port and port 5 requires some different
+ * priority than any other ports.
+ */
+ case 0:
+ case 5:
+ case 6:
+ mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) |
+ QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e);
+ break;
+ default:
+ mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) |
+ QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19);
+ }
+ qca8k_write(priv, QCA8K_REG_PORT_HOL_CTRL0(i), mask);
+
+ mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) |
+ QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
+ QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
+ QCA8K_PORT_HOL_CTRL1_WRED_EN;
+ qca8k_rmw(priv, QCA8K_REG_PORT_HOL_CTRL1(i),
+ QCA8K_PORT_HOL_CTRL1_ING_BUF |
+ QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
+ QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
+ QCA8K_PORT_HOL_CTRL1_WRED_EN,
+ mask);
+ }
+
+ /* Set initial MTU for every port.
+ * We have only have a general MTU setting. So track
+ * every port and set the max across all port.
+ */
+ priv->port_mtu[i] = ETH_FRAME_LEN + ETH_FCS_LEN;
+ }
+
+ /* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */
+ if (priv->switch_id == QCA8K_ID_QCA8327) {
+ mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) |
+ QCA8K_GLOBAL_FC_GOL_XOFF_THRES(496);
+ qca8k_rmw(priv, QCA8K_REG_GLOBAL_FC_THRESH,
+ QCA8K_GLOBAL_FC_GOL_XON_THRES_S |
+ QCA8K_GLOBAL_FC_GOL_XOFF_THRES_S,
+ mask);
+ }
+
+ /* Setup our port MTUs to match power on defaults */
+ ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN);
+ if (ret)
+ dev_warn(priv->dev, "failed setting MTU settings");
+
+ /* Flush the FDB table */
+ qca8k_fdb_flush(priv);
+
+ /* We don't have interrupts for link changes, so we need to poll */
+ ds->pcs_poll = true;
+
+ return 0;
+}
+
+static void
+qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_index,
+ u32 reg)
+{
+ u32 delay, val = 0;
+ int ret;
+
+ /* Delay can be declared in 3 different way.
+ * Mode to rgmii and internal-delay standard binding defined
+ * rgmii-id or rgmii-tx/rx phy mode set.
+ * The parse logic set a delay different than 0 only when one
+ * of the 3 different way is used. In all other case delay is
+ * not enabled. With ID or TX/RXID delay is enabled and set
+ * to the default and recommended value.
+ */
+ if (priv->ports_config.rgmii_tx_delay[cpu_port_index]) {
+ delay = priv->ports_config.rgmii_tx_delay[cpu_port_index];
+
+ val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) |
+ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN;
+ }
+
+ if (priv->ports_config.rgmii_rx_delay[cpu_port_index]) {
+ delay = priv->ports_config.rgmii_rx_delay[cpu_port_index];
+
+ val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) |
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN;
+ }
+
+ /* Set RGMII delay based on the selected values */
+ ret = qca8k_rmw(priv, reg,
+ QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK |
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK |
+ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN |
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN,
+ val);
+ if (ret)
+ dev_err(priv->dev, "Failed to set internal delay for CPU port%d",
+ cpu_port_index == QCA8K_CPU_PORT0 ? 0 : 6);
+}
+
+static void
+qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int cpu_port_index, ret;
+ u32 reg, val;
+
+ switch (port) {
+ case 0: /* 1st CPU port */
+ if (state->interface != PHY_INTERFACE_MODE_RGMII &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
+ state->interface != PHY_INTERFACE_MODE_SGMII)
+ return;
+
+ reg = QCA8K_REG_PORT0_PAD_CTRL;
+ cpu_port_index = QCA8K_CPU_PORT0;
+ break;
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ /* Internal PHY, nothing to do */
+ return;
+ case 6: /* 2nd CPU port / external PHY */
+ if (state->interface != PHY_INTERFACE_MODE_RGMII &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
+ state->interface != PHY_INTERFACE_MODE_SGMII &&
+ state->interface != PHY_INTERFACE_MODE_1000BASEX)
+ return;
+
+ reg = QCA8K_REG_PORT6_PAD_CTRL;
+ cpu_port_index = QCA8K_CPU_PORT6;
+ break;
+ default:
+ dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port);
+ return;
+ }
+
+ if (port != 6 && phylink_autoneg_inband(mode)) {
+ dev_err(ds->dev, "%s: in-band negotiation unsupported\n",
+ __func__);
+ return;
+ }
+
+ switch (state->interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN);
+
+ /* Configure rgmii delay */
+ qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
+
+ /* QCA8337 requires to set rgmii rx delay for all ports.
+ * This is enabled through PORT5_PAD_CTRL for all ports,
+ * rather than individual port registers.
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8337)
+ qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_1000BASEX:
+ /* Enable SGMII on the port */
+ qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
+
+ /* Enable/disable SerDes auto-negotiation as necessary */
+ ret = qca8k_read(priv, QCA8K_REG_PWS, &val);
+ if (ret)
+ return;
+ if (phylink_autoneg_inband(mode))
+ val &= ~QCA8K_PWS_SERDES_AEN_DIS;
+ else
+ val |= QCA8K_PWS_SERDES_AEN_DIS;
+ qca8k_write(priv, QCA8K_REG_PWS, val);
+
+ /* Configure the SGMII parameters */
+ ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val);
+ if (ret)
+ return;
+
+ val |= QCA8K_SGMII_EN_SD;
+
+ if (priv->ports_config.sgmii_enable_pll)
+ val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
+ QCA8K_SGMII_EN_TX;
+
+ if (dsa_is_cpu_port(ds, port)) {
+ /* CPU port, we're talking to the CPU MAC, be a PHY */
+ val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
+ val |= QCA8K_SGMII_MODE_CTRL_PHY;
+ } else if (state->interface == PHY_INTERFACE_MODE_SGMII) {
+ val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
+ val |= QCA8K_SGMII_MODE_CTRL_MAC;
+ } else if (state->interface == PHY_INTERFACE_MODE_1000BASEX) {
+ val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
+ val |= QCA8K_SGMII_MODE_CTRL_BASEX;
+ }
+
+ qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val);
+
+ /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and
+ * falling edge is set writing in the PORT0 PAD reg
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8327 ||
+ priv->switch_id == QCA8K_ID_QCA8337)
+ reg = QCA8K_REG_PORT0_PAD_CTRL;
+
+ val = 0;
+
+ /* SGMII Clock phase configuration */
+ if (priv->ports_config.sgmii_rx_clk_falling_edge)
+ val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE;
+
+ if (priv->ports_config.sgmii_tx_clk_falling_edge)
+ val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE;
+
+ if (val)
+ ret = qca8k_rmw(priv, reg,
+ QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE |
+ QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE,
+ val);
+
+ /* From original code is reported port instability as SGMII also
+ * require delay set. Apply advised values here or take them from DT.
+ */
+ if (state->interface == PHY_INTERFACE_MODE_SGMII)
+ qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
+
+ break;
+ default:
+ dev_err(ds->dev, "xMII mode %s not supported for port %d\n",
+ phy_modes(state->interface), port);
+ return;
+ }
+}
+
+static void
+qca8k_phylink_validate(struct dsa_switch *ds, int port,
+ unsigned long *supported,
+ struct phylink_link_state *state)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+
+ switch (port) {
+ case 0: /* 1st CPU port */
+ if (state->interface != PHY_INTERFACE_MODE_NA &&
+ state->interface != PHY_INTERFACE_MODE_RGMII &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
+ state->interface != PHY_INTERFACE_MODE_SGMII)
+ goto unsupported;
+ break;
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ /* Internal PHY */
+ if (state->interface != PHY_INTERFACE_MODE_NA &&
+ state->interface != PHY_INTERFACE_MODE_GMII &&
+ state->interface != PHY_INTERFACE_MODE_INTERNAL)
+ goto unsupported;
+ break;
+ case 6: /* 2nd CPU port / external PHY */
+ if (state->interface != PHY_INTERFACE_MODE_NA &&
+ state->interface != PHY_INTERFACE_MODE_RGMII &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
+ state->interface != PHY_INTERFACE_MODE_SGMII &&
+ state->interface != PHY_INTERFACE_MODE_1000BASEX)
+ goto unsupported;
+ break;
+ default:
+unsupported:
+ linkmode_zero(supported);
+ return;
+ }
+
+ phylink_set_port_modes(mask);
+ phylink_set(mask, Autoneg);
+
+ phylink_set(mask, 1000baseT_Full);
+ phylink_set(mask, 10baseT_Half);
+ phylink_set(mask, 10baseT_Full);
+ phylink_set(mask, 100baseT_Half);
+ phylink_set(mask, 100baseT_Full);
+
+ if (state->interface == PHY_INTERFACE_MODE_1000BASEX)
+ phylink_set(mask, 1000baseX_Full);
+
+ phylink_set(mask, Pause);
+ phylink_set(mask, Asym_Pause);
+
+ linkmode_and(supported, supported, mask);
+ linkmode_and(state->advertising, state->advertising, mask);
+}
+
+static int
+qca8k_phylink_mac_link_state(struct dsa_switch *ds, int port,
+ struct phylink_link_state *state)
+{
+ struct qca8k_priv *priv = ds->priv;
+ u32 reg;
+ int ret;
+
+ ret = qca8k_read(priv, QCA8K_REG_PORT_STATUS(port), ®);
+ if (ret < 0)
+ return ret;
+
+ state->link = !!(reg & QCA8K_PORT_STATUS_LINK_UP);
+ state->an_complete = state->link;
+ state->an_enabled = !!(reg & QCA8K_PORT_STATUS_LINK_AUTO);
+ state->duplex = (reg & QCA8K_PORT_STATUS_DUPLEX) ? DUPLEX_FULL :
+ DUPLEX_HALF;
+
+ switch (reg & QCA8K_PORT_STATUS_SPEED) {
+ case QCA8K_PORT_STATUS_SPEED_10:
+ state->speed = SPEED_10;
+ break;
+ case QCA8K_PORT_STATUS_SPEED_100:
+ state->speed = SPEED_100;
+ break;
+ case QCA8K_PORT_STATUS_SPEED_1000:
+ state->speed = SPEED_1000;
+ break;
+ default:
+ state->speed = SPEED_UNKNOWN;
+ break;
+ }
+
+ state->pause = MLO_PAUSE_NONE;
+ if (reg & QCA8K_PORT_STATUS_RXFLOW)
+ state->pause |= MLO_PAUSE_RX;
+ if (reg & QCA8K_PORT_STATUS_TXFLOW)
+ state->pause |= MLO_PAUSE_TX;
+
+ return 1;
+}
+
+static void
+qca8k_phylink_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
+ phy_interface_t interface)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ qca8k_port_set_status(priv, port, 0);
+}
+
+static void
+qca8k_phylink_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
+ phy_interface_t interface, struct phy_device *phydev,
+ int speed, int duplex, bool tx_pause, bool rx_pause)
+{
+ struct qca8k_priv *priv = ds->priv;
+ u32 reg;
+
+ if (phylink_autoneg_inband(mode)) {
+ reg = QCA8K_PORT_STATUS_LINK_AUTO;
+ } else {
+ switch (speed) {
+ case SPEED_10:
+ reg = QCA8K_PORT_STATUS_SPEED_10;
+ break;
+ case SPEED_100:
+ reg = QCA8K_PORT_STATUS_SPEED_100;
+ break;
+ case SPEED_1000:
+ reg = QCA8K_PORT_STATUS_SPEED_1000;
+ break;
+ default:
+ reg = QCA8K_PORT_STATUS_LINK_AUTO;
+ break;
+ }
+
+ if (duplex == DUPLEX_FULL)
+ reg |= QCA8K_PORT_STATUS_DUPLEX;
+
+ if (rx_pause || dsa_is_cpu_port(ds, port))
+ reg |= QCA8K_PORT_STATUS_RXFLOW;
+
+ if (tx_pause || dsa_is_cpu_port(ds, port))
+ reg |= QCA8K_PORT_STATUS_TXFLOW;
+ }
+
+ reg |= QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC;
+
+ qca8k_write(priv, QCA8K_REG_PORT_STATUS(port), reg);
+}
+
+static void
+qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data)
+{
+ int i;
+
+ if (stringset != ETH_SS_STATS)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++)
+ strncpy(data + i * ETH_GSTRING_LEN, ar8327_mib[i].name,
+ ETH_GSTRING_LEN);
+}
+
+static void
+qca8k_get_ethtool_stats(struct dsa_switch *ds, int port,
+ uint64_t *data)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ const struct qca8k_mib_desc *mib;
+ u32 reg, i, val;
+ u32 hi = 0;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) {
+ mib = &ar8327_mib[i];
+ reg = QCA8K_PORT_MIB_COUNTER(port) + mib->offset;
+
+ ret = qca8k_read(priv, reg, &val);
+ if (ret < 0)
+ continue;
+
+ if (mib->size == 2) {
+ ret = qca8k_read(priv, reg + 4, &hi);
+ if (ret < 0)
+ continue;
+ }
+
+ data[i] = val;
+ if (mib->size == 2)
+ data[i] |= (u64)hi << 32;
+ }
+}
+
+static int
+qca8k_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+ if (sset != ETH_SS_STATS)
+ return 0;
+
+ return ARRAY_SIZE(ar8327_mib);
+}
+
+static int
+qca8k_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *eee)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ u32 lpi_en = QCA8K_REG_EEE_CTRL_LPI_EN(port);
+ u32 reg;
+ int ret;
+
+ mutex_lock(&priv->reg_mutex);
+ ret = qca8k_read(priv, QCA8K_REG_EEE_CTRL, ®);
+ if (ret < 0)
+ goto exit;
+
+ if (eee->eee_enabled)
+ reg |= lpi_en;
+ else
+ reg &= ~lpi_en;
+ ret = qca8k_write(priv, QCA8K_REG_EEE_CTRL, reg);
+
+exit:
+ mutex_unlock(&priv->reg_mutex);
+ return ret;
+}
+
+static int
+qca8k_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
+{
+ /* Nothing to do on the port's MAC */
+ return 0;
+}
+
+static void
+qca8k_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ u32 stp_state;
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_DISABLED;
+ break;
+ case BR_STATE_BLOCKING:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_BLOCKING;
+ break;
+ case BR_STATE_LISTENING:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_LISTENING;
+ break;
+ case BR_STATE_LEARNING:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_LEARNING;
+ break;
+ case BR_STATE_FORWARDING:
+ default:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_FORWARD;
+ break;
+ }
+
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_STATE_MASK, stp_state);
+}
+
+static int
+qca8k_port_bridge_join(struct dsa_switch *ds, int port, struct net_device *br)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ int port_mask, cpu_port;
+ int i, ret;
+
+ cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
+ port_mask = BIT(cpu_port);
+
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ if (dsa_is_cpu_port(ds, i))
+ continue;
+ if (dsa_to_port(ds, i)->bridge_dev != br)
+ continue;
+ /* Add this port to the portvlan mask of the other ports
+ * in the bridge
+ */
+ ret = qca8k_reg_set(priv,
+ QCA8K_PORT_LOOKUP_CTRL(i),
+ BIT(port));
+ if (ret)
+ return ret;
+ if (i != port)
+ port_mask |= BIT(i);
+ }
+
+ /* Add all other ports to this ports portvlan mask */
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_MEMBER, port_mask);
+
+ return ret;
+}
+
+static void
+qca8k_port_bridge_leave(struct dsa_switch *ds, int port, struct net_device *br)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ int cpu_port, i;
+
+ cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
+
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ if (dsa_is_cpu_port(ds, i))
+ continue;
+ if (dsa_to_port(ds, i)->bridge_dev != br)
+ continue;
+ /* Remove this port to the portvlan mask of the other ports
+ * in the bridge
+ */
+ qca8k_reg_clear(priv,
+ QCA8K_PORT_LOOKUP_CTRL(i),
+ BIT(port));
+ }
+
+ /* Set the cpu port to be the only one in the portvlan mask of
+ * this port
+ */
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_MEMBER, BIT(cpu_port));
+}
+
+static int
+qca8k_port_enable(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+
+ qca8k_port_set_status(priv, port, 1);
+ priv->port_sts[port].enabled = 1;
+
+ if (dsa_is_user_port(ds, port))
+ phy_support_asym_pause(phy);
+
+ return 0;
+}
+
+static void
+qca8k_port_disable(struct dsa_switch *ds, int port)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+
+ qca8k_port_set_status(priv, port, 0);
+ priv->port_sts[port].enabled = 0;
+}
+
+static int
+qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int i, mtu = 0;
+
+ priv->port_mtu[port] = new_mtu;
+
+ for (i = 0; i < QCA8K_NUM_PORTS; i++)
+ if (priv->port_mtu[i] > mtu)
+ mtu = priv->port_mtu[i];
+
+ /* Include L2 header / FCS length */
+ return qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, mtu + ETH_HLEN + ETH_FCS_LEN);
+}
+
+static int
+qca8k_port_max_mtu(struct dsa_switch *ds, int port)
+{
+ return QCA8K_MAX_MTU;
+}
+
+static int
+qca8k_port_fdb_insert(struct qca8k_priv *priv, const u8 *addr,
+ u16 port_mask, u16 vid)
+{
+ /* Set the vid to the port vlan id if no vid is set */
+ if (!vid)
+ vid = QCA8K_PORT_VID_DEF;
+
+ return qca8k_fdb_add(priv, addr, port_mask, vid,
+ QCA8K_ATU_STATUS_STATIC);
+}
+
+static int
+qca8k_port_fdb_add(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ u16 port_mask = BIT(port);
+
+ return qca8k_port_fdb_insert(priv, addr, port_mask, vid);
+}
+
+static int
+qca8k_port_fdb_del(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ u16 port_mask = BIT(port);
+
+ if (!vid)
+ vid = QCA8K_PORT_VID_DEF;
+
+ return qca8k_fdb_del(priv, addr, port_mask, vid);
+}
+
+static int
+qca8k_port_fdb_dump(struct dsa_switch *ds, int port,
+ dsa_fdb_dump_cb_t *cb, void *data)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ struct qca8k_fdb _fdb = { 0 };
+ int cnt = QCA8K_NUM_FDB_RECORDS;
+ bool is_static;
+ int ret = 0;
+
+ mutex_lock(&priv->reg_mutex);
+ while (cnt-- && !qca8k_fdb_next(priv, &_fdb, port)) {
+ if (!_fdb.aging)
+ break;
+ is_static = (_fdb.aging == QCA8K_ATU_STATUS_STATIC);
+ ret = cb(_fdb.mac, _fdb.vid, is_static, data);
+ if (ret)
+ break;
+ }
+ mutex_unlock(&priv->reg_mutex);
+
+ return 0;
+}
+
+static int
+qca8k_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
+ struct switchdev_trans *trans)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ if (switchdev_trans_ph_prepare(trans))
+ return 0;
+
+ if (vlan_filtering) {
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_VLAN_MODE,
+ QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE);
+ } else {
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_VLAN_MODE,
+ QCA8K_PORT_LOOKUP_VLAN_MODE_NONE);
+ }
+
+ return 0;
+}
+
+static int
+qca8k_port_vlan_prepare(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ return 0;
+}
+
+static void
+qca8k_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
+ struct qca8k_priv *priv = ds->priv;
+ int ret = 0;
+ u16 vid;
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end && !ret; ++vid)
+ ret = qca8k_vlan_add(priv, port, vid, untagged);
+
+ if (ret)
+ dev_err(priv->dev, "Failed to add VLAN to port %d (%d)", port, ret);
+
+ if (pvid) {
+ int shift = 16 * (port % 2);
+
+ qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port),
+ 0xfff << shift,
+ vlan->vid_end << shift);
+ qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port),
+ QCA8K_PORT_VLAN_CVID(vlan->vid_end) |
+ QCA8K_PORT_VLAN_SVID(vlan->vid_end));
+ }
+}
+
+static int
+qca8k_port_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int ret = 0;
+ u16 vid;
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end && !ret; ++vid)
+ ret = qca8k_vlan_del(priv, port, vid);
+
+ if (ret)
+ dev_err(priv->dev, "Failed to delete VLAN from port %d (%d)", port, ret);
+
+ return ret;
+}
+
+static u32 qca8k_get_phy_flags(struct dsa_switch *ds, int port)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ /* Communicate to the phy internal driver the switch revision.
+ * Based on the switch revision different values needs to be
+ * set to the dbg and mmd reg on the phy.
+ * The first 2 bit are used to communicate the switch revision
+ * to the phy driver.
+ */
+ if (port > 0 && port < 6)
+ return priv->switch_revision;
+
+ return 0;
+}
+
+static enum dsa_tag_protocol
+qca8k_get_tag_protocol(struct dsa_switch *ds, int port,
+ enum dsa_tag_protocol mp)
+{
+ return DSA_TAG_PROTO_QCA;
+}
+
+static const struct dsa_switch_ops qca8k_switch_ops = {
+ .get_tag_protocol = qca8k_get_tag_protocol,
+ .setup = qca8k_setup,
+ .get_strings = qca8k_get_strings,
+ .get_ethtool_stats = qca8k_get_ethtool_stats,
+ .get_sset_count = qca8k_get_sset_count,
+ .get_mac_eee = qca8k_get_mac_eee,
+ .set_mac_eee = qca8k_set_mac_eee,
+ .port_enable = qca8k_port_enable,
+ .port_disable = qca8k_port_disable,
+ .port_change_mtu = qca8k_port_change_mtu,
+ .port_max_mtu = qca8k_port_max_mtu,
+ .port_stp_state_set = qca8k_port_stp_state_set,
+ .port_bridge_join = qca8k_port_bridge_join,
+ .port_bridge_leave = qca8k_port_bridge_leave,
+ .port_fdb_add = qca8k_port_fdb_add,
+ .port_fdb_del = qca8k_port_fdb_del,
+ .port_fdb_dump = qca8k_port_fdb_dump,
+ .port_vlan_filtering = qca8k_port_vlan_filtering,
+ .port_vlan_prepare = qca8k_port_vlan_prepare,
+ .port_vlan_add = qca8k_port_vlan_add,
+ .port_vlan_del = qca8k_port_vlan_del,
+ .phylink_validate = qca8k_phylink_validate,
+ .phylink_mac_link_state = qca8k_phylink_mac_link_state,
+ .phylink_mac_config = qca8k_phylink_mac_config,
+ .phylink_mac_link_down = qca8k_phylink_mac_link_down,
+ .phylink_mac_link_up = qca8k_phylink_mac_link_up,
+ .get_phy_flags = qca8k_get_phy_flags,
+};
+
+static int qca8k_read_switch_id(struct qca8k_priv *priv)
+{
+ const struct qca8k_match_data *data;
+ u32 val;
+ u8 id;
+ int ret;
+
+ /* get the switches ID from the compatible */
+ data = of_device_get_match_data(priv->dev);
+ if (!data)
+ return -ENODEV;
+
+ ret = qca8k_read(priv, QCA8K_REG_MASK_CTRL, &val);
+ if (ret < 0)
+ return -ENODEV;
+
+ id = QCA8K_MASK_CTRL_DEVICE_ID(val & QCA8K_MASK_CTRL_DEVICE_ID_MASK);
+ if (id != data->id) {
+ dev_err(priv->dev, "Switch id detected %x but expected %x", id, data->id);
+ return -ENODEV;
+ }
+
+ priv->switch_id = id;
+
+ /* Save revision to communicate to the internal PHY driver */
+ priv->switch_revision = (val & QCA8K_MASK_CTRL_REV_ID_MASK);
+
+ return 0;
+}
+
+static int
+qca8k_sw_probe(struct mdio_device *mdiodev)
+{
+ struct qca8k_priv *priv;
+ int ret;
+
+ /* allocate the private data struct so that we can probe the switches
+ * ID register
+ */
+ priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->bus = mdiodev->bus;
+ priv->dev = &mdiodev->dev;
+
+ priv->reset_gpio = devm_gpiod_get_optional(priv->dev, "reset",
+ GPIOD_ASIS);
+ if (IS_ERR(priv->reset_gpio))
+ return PTR_ERR(priv->reset_gpio);
+
+ if (priv->reset_gpio) {
+ gpiod_set_value_cansleep(priv->reset_gpio, 1);
+ /* The active low duration must be greater than 10 ms
+ * and checkpatch.pl wants 20 ms.
+ */
+ msleep(20);
+ gpiod_set_value_cansleep(priv->reset_gpio, 0);
+ }
+
+ /* Check the detected switch id */
+ ret = qca8k_read_switch_id(priv);
+ if (ret)
+ return ret;
+
+ priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
+ if (!priv->ds)
+ return -ENOMEM;
+
+ priv->ds->dev = &mdiodev->dev;
+ priv->ds->num_ports = QCA8K_NUM_PORTS;
+ priv->ds->configure_vlan_while_not_filtering = true;
+ priv->ds->priv = priv;
+ priv->ops = qca8k_switch_ops;
+ priv->ds->ops = &priv->ops;
+ mutex_init(&priv->reg_mutex);
+ dev_set_drvdata(&mdiodev->dev, priv);
+
+ return dsa_register_switch(priv->ds);
+}
+
+static void
+qca8k_sw_remove(struct mdio_device *mdiodev)
+{
+ struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev);
+ int i;
+
+ for (i = 0; i < QCA8K_NUM_PORTS; i++)
+ qca8k_port_set_status(priv, i, 0);
+
+ dsa_unregister_switch(priv->ds);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void
+qca8k_set_pm(struct qca8k_priv *priv, int enable)
+{
+ int i;
+
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ if (!priv->port_sts[i].enabled)
+ continue;
+
+ qca8k_port_set_status(priv, i, enable);
+ }
+}
+
+static int qca8k_suspend(struct device *dev)
+{
+ struct qca8k_priv *priv = dev_get_drvdata(dev);
+
+ qca8k_set_pm(priv, 0);
+
+ return dsa_switch_suspend(priv->ds);
+}
+
+static int qca8k_resume(struct device *dev)
+{
+ struct qca8k_priv *priv = dev_get_drvdata(dev);
+
+ qca8k_set_pm(priv, 1);
+
+ return dsa_switch_resume(priv->ds);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
+ qca8k_suspend, qca8k_resume);
+
+static const struct qca8k_match_data qca8327 = {
+ .id = QCA8K_ID_QCA8327,
+ .reduced_package = true,
+};
+
+static const struct qca8k_match_data qca8328 = {
+ .id = QCA8K_ID_QCA8327,
+};
+
+static const struct qca8k_match_data qca833x = {
+ .id = QCA8K_ID_QCA8337,
+};
+
+static const struct of_device_id qca8k_of_match[] = {
+ { .compatible = "qca,qca8327", .data = &qca8327 },
+ { .compatible = "qca,qca8328", .data = &qca8328 },
+ { .compatible = "qca,qca8334", .data = &qca833x },
+ { .compatible = "qca,qca8337", .data = &qca833x },
+ { /* sentinel */ },
+};
+
+static struct mdio_driver qca8kmdio_driver = {
+ .probe = qca8k_sw_probe,
+ .remove = qca8k_sw_remove,
+ .mdiodrv.driver = {
+ .name = "qca8k",
+ .of_match_table = qca8k_of_match,
+ .pm = &qca8k_pm_ops,
+ },
+};
+
+mdio_module_driver(qca8kmdio_driver);
+
+MODULE_AUTHOR("Mathieu Olivari, John Crispin <john at phrozen.org>");
+MODULE_DESCRIPTION("Driver for QCA8K ethernet switch family");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qca8k");
diff --git a/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
new file mode 100644
index 0000000000..e10571a398
--- /dev/null
+++ b/target/linux/ipq40xx/files/drivers/net/dsa/qca/qca8k-ipq4019.h
@@ -0,0 +1,310 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2009 Felix Fietkau <nbd at nbd.name>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg at openwrt.org>
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __QCA8K_H
+#define __QCA8K_H
+
+#include <linux/delay.h>
+#include <linux/regmap.h>
+#include <linux/gpio.h>
+
+#define QCA8K_NUM_PORTS 7
+#define QCA8K_NUM_CPU_PORTS 2
+#define QCA8K_MAX_MTU 9000
+
+#define PHY_ID_QCA8327 0x004dd034
+#define QCA8K_ID_QCA8327 0x12
+#define PHY_ID_QCA8337 0x004dd036
+#define QCA8K_ID_QCA8337 0x13
+
+#define QCA8K_BUSY_WAIT_TIMEOUT 2000
+
+#define QCA8K_NUM_FDB_RECORDS 2048
+
+#define QCA8K_PORT_VID_DEF 1
+
+/* Global control registers */
+#define QCA8K_REG_MASK_CTRL 0x000
+#define QCA8K_MASK_CTRL_REV_ID_MASK GENMASK(7, 0)
+#define QCA8K_MASK_CTRL_REV_ID(x) ((x) >> 0)
+#define QCA8K_MASK_CTRL_DEVICE_ID_MASK GENMASK(15, 8)
+#define QCA8K_MASK_CTRL_DEVICE_ID(x) ((x) >> 8)
+#define QCA8K_REG_PORT0_PAD_CTRL 0x004
+#define QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE BIT(19)
+#define QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE BIT(18)
+#define QCA8K_REG_PORT5_PAD_CTRL 0x008
+#define QCA8K_REG_PORT6_PAD_CTRL 0x00c
+#define QCA8K_PORT_PAD_RGMII_EN BIT(26)
+#define QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK GENMASK(23, 22)
+#define QCA8K_PORT_PAD_RGMII_TX_DELAY(x) ((x) << 22)
+#define QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK GENMASK(21, 20)
+#define QCA8K_PORT_PAD_RGMII_RX_DELAY(x) ((x) << 20)
+#define QCA8K_PORT_PAD_RGMII_TX_DELAY_EN BIT(25)
+#define QCA8K_PORT_PAD_RGMII_RX_DELAY_EN BIT(24)
+#define QCA8K_MAX_DELAY 3
+#define QCA8K_PORT_PAD_SGMII_EN BIT(7)
+#define QCA8K_REG_PWS 0x010
+#define QCA8K_PWS_POWER_ON_SEL BIT(31)
+/* This reg is only valid for QCA832x and toggle the package
+ * type from 176 pin (by default) to 148 pin used on QCA8327
+ */
+#define QCA8327_PWS_PACKAGE148_EN BIT(30)
+#define QCA8K_PWS_LED_OPEN_EN_CSR BIT(24)
+#define QCA8K_PWS_SERDES_AEN_DIS BIT(7)
+#define QCA8K_REG_MODULE_EN 0x030
+#define QCA8K_MODULE_EN_MIB BIT(0)
+#define QCA8K_REG_MIB 0x034
+#define QCA8K_MIB_FLUSH BIT(24)
+#define QCA8K_MIB_CPU_KEEP BIT(20)
+#define QCA8K_MIB_BUSY BIT(17)
+#define QCA8K_MDIO_MASTER_CTRL 0x3c
+#define QCA8K_MDIO_MASTER_BUSY BIT(31)
+#define QCA8K_MDIO_MASTER_EN BIT(30)
+#define QCA8K_MDIO_MASTER_READ BIT(27)
+#define QCA8K_MDIO_MASTER_WRITE 0
+#define QCA8K_MDIO_MASTER_SUP_PRE BIT(26)
+#define QCA8K_MDIO_MASTER_PHY_ADDR(x) ((x) << 21)
+#define QCA8K_MDIO_MASTER_REG_ADDR(x) ((x) << 16)
+#define QCA8K_MDIO_MASTER_DATA(x) (x)
+#define QCA8K_MDIO_MASTER_DATA_MASK GENMASK(15, 0)
+#define QCA8K_MDIO_MASTER_MAX_PORTS 5
+#define QCA8K_MDIO_MASTER_MAX_REG 32
+#define QCA8K_GOL_MAC_ADDR0 0x60
+#define QCA8K_GOL_MAC_ADDR1 0x64
+#define QCA8K_MAX_FRAME_SIZE 0x78
+#define QCA8K_REG_PORT_STATUS(_i) (0x07c + (_i) * 4)
+#define QCA8K_PORT_STATUS_SPEED GENMASK(1, 0)
+#define QCA8K_PORT_STATUS_SPEED_10 0
+#define QCA8K_PORT_STATUS_SPEED_100 0x1
+#define QCA8K_PORT_STATUS_SPEED_1000 0x2
+#define QCA8K_PORT_STATUS_TXMAC BIT(2)
+#define QCA8K_PORT_STATUS_RXMAC BIT(3)
+#define QCA8K_PORT_STATUS_TXFLOW BIT(4)
+#define QCA8K_PORT_STATUS_RXFLOW BIT(5)
+#define QCA8K_PORT_STATUS_DUPLEX BIT(6)
+#define QCA8K_PORT_STATUS_LINK_UP BIT(8)
+#define QCA8K_PORT_STATUS_LINK_AUTO BIT(9)
+#define QCA8K_PORT_STATUS_LINK_PAUSE BIT(10)
+#define QCA8K_PORT_STATUS_FLOW_AUTO BIT(12)
+#define QCA8K_REG_PORT_HDR_CTRL(_i) (0x9c + (_i * 4))
+#define QCA8K_PORT_HDR_CTRL_RX_MASK GENMASK(3, 2)
+#define QCA8K_PORT_HDR_CTRL_RX_S 2
+#define QCA8K_PORT_HDR_CTRL_TX_MASK GENMASK(1, 0)
+#define QCA8K_PORT_HDR_CTRL_TX_S 0
+#define QCA8K_PORT_HDR_CTRL_ALL 2
+#define QCA8K_PORT_HDR_CTRL_MGMT 1
+#define QCA8K_PORT_HDR_CTRL_NONE 0
+#define QCA8K_REG_SGMII_CTRL 0x0e0
+#define QCA8K_SGMII_EN_PLL BIT(1)
+#define QCA8K_SGMII_EN_RX BIT(2)
+#define QCA8K_SGMII_EN_TX BIT(3)
+#define QCA8K_SGMII_EN_SD BIT(4)
+#define QCA8K_SGMII_CLK125M_DELAY BIT(7)
+#define QCA8K_SGMII_MODE_CTRL_MASK (BIT(22) | BIT(23))
+#define QCA8K_SGMII_MODE_CTRL_BASEX (0 << 22)
+#define QCA8K_SGMII_MODE_CTRL_PHY (1 << 22)
+#define QCA8K_SGMII_MODE_CTRL_MAC (2 << 22)
+
+/* MAC_PWR_SEL registers */
+#define QCA8K_REG_MAC_PWR_SEL 0x0e4
+#define QCA8K_MAC_PWR_RGMII1_1_8V BIT(18)
+#define QCA8K_MAC_PWR_RGMII0_1_8V BIT(19)
+
+/* EEE control registers */
+#define QCA8K_REG_EEE_CTRL 0x100
+#define QCA8K_REG_EEE_CTRL_LPI_EN(_i) ((_i + 1) * 2)
+
+/* ACL registers */
+#define QCA8K_REG_PORT_VLAN_CTRL0(_i) (0x420 + (_i * 8))
+#define QCA8K_PORT_VLAN_CVID(x) (x << 16)
+#define QCA8K_PORT_VLAN_SVID(x) x
+#define QCA8K_REG_PORT_VLAN_CTRL1(_i) (0x424 + (_i * 8))
+#define QCA8K_REG_IPV4_PRI_BASE_ADDR 0x470
+#define QCA8K_REG_IPV4_PRI_ADDR_MASK 0x474
+
+/* Lookup registers */
+#define QCA8K_REG_ATU_DATA0 0x600
+#define QCA8K_ATU_ADDR2_S 24
+#define QCA8K_ATU_ADDR3_S 16
+#define QCA8K_ATU_ADDR4_S 8
+#define QCA8K_REG_ATU_DATA1 0x604
+#define QCA8K_ATU_PORT_M 0x7f
+#define QCA8K_ATU_PORT_S 16
+#define QCA8K_ATU_ADDR0_S 8
+#define QCA8K_REG_ATU_DATA2 0x608
+#define QCA8K_ATU_VID_M 0xfff
+#define QCA8K_ATU_VID_S 8
+#define QCA8K_ATU_STATUS_M 0xf
+#define QCA8K_ATU_STATUS_STATIC 0xf
+#define QCA8K_REG_ATU_FUNC 0x60c
+#define QCA8K_ATU_FUNC_BUSY BIT(31)
+#define QCA8K_ATU_FUNC_PORT_EN BIT(14)
+#define QCA8K_ATU_FUNC_MULTI_EN BIT(13)
+#define QCA8K_ATU_FUNC_FULL BIT(12)
+#define QCA8K_ATU_FUNC_PORT_M 0xf
+#define QCA8K_ATU_FUNC_PORT_S 8
+#define QCA8K_REG_VTU_FUNC0 0x610
+#define QCA8K_VTU_FUNC0_VALID BIT(20)
+#define QCA8K_VTU_FUNC0_IVL_EN BIT(19)
+#define QCA8K_VTU_FUNC0_EG_MODE_S(_i) (4 + (_i) * 2)
+#define QCA8K_VTU_FUNC0_EG_MODE_MASK 3
+#define QCA8K_VTU_FUNC0_EG_MODE_UNMOD 0
+#define QCA8K_VTU_FUNC0_EG_MODE_UNTAG 1
+#define QCA8K_VTU_FUNC0_EG_MODE_TAG 2
+#define QCA8K_VTU_FUNC0_EG_MODE_NOT 3
+#define QCA8K_REG_VTU_FUNC1 0x614
+#define QCA8K_VTU_FUNC1_BUSY BIT(31)
+#define QCA8K_VTU_FUNC1_VID_S 16
+#define QCA8K_VTU_FUNC1_FULL BIT(4)
+#define QCA8K_REG_GLOBAL_FW_CTRL0 0x620
+#define QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN BIT(10)
+#define QCA8K_REG_GLOBAL_FW_CTRL1 0x624
+#define QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S 24
+#define QCA8K_GLOBAL_FW_CTRL1_BC_DP_S 16
+#define QCA8K_GLOBAL_FW_CTRL1_MC_DP_S 8
+#define QCA8K_GLOBAL_FW_CTRL1_UC_DP_S 0
+#define QCA8K_PORT_LOOKUP_CTRL(_i) (0x660 + (_i) * 0xc)
+#define QCA8K_PORT_LOOKUP_MEMBER GENMASK(6, 0)
+#define QCA8K_PORT_LOOKUP_VLAN_MODE GENMASK(9, 8)
+#define QCA8K_PORT_LOOKUP_VLAN_MODE_NONE (0 << 8)
+#define QCA8K_PORT_LOOKUP_VLAN_MODE_FALLBACK (1 << 8)
+#define QCA8K_PORT_LOOKUP_VLAN_MODE_CHECK (2 << 8)
+#define QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE (3 << 8)
+#define QCA8K_PORT_LOOKUP_STATE_MASK GENMASK(18, 16)
+#define QCA8K_PORT_LOOKUP_STATE_DISABLED (0 << 16)
+#define QCA8K_PORT_LOOKUP_STATE_BLOCKING (1 << 16)
+#define QCA8K_PORT_LOOKUP_STATE_LISTENING (2 << 16)
+#define QCA8K_PORT_LOOKUP_STATE_LEARNING (3 << 16)
+#define QCA8K_PORT_LOOKUP_STATE_FORWARD (4 << 16)
+#define QCA8K_PORT_LOOKUP_STATE GENMASK(18, 16)
+#define QCA8K_PORT_LOOKUP_LEARN BIT(20)
+
+#define QCA8K_REG_GLOBAL_FC_THRESH 0x800
+#define QCA8K_GLOBAL_FC_GOL_XON_THRES(x) ((x) << 16)
+#define QCA8K_GLOBAL_FC_GOL_XON_THRES_S GENMASK(24, 16)
+#define QCA8K_GLOBAL_FC_GOL_XOFF_THRES(x) ((x) << 0)
+#define QCA8K_GLOBAL_FC_GOL_XOFF_THRES_S GENMASK(8, 0)
+
+#define QCA8K_REG_PORT_HOL_CTRL0(_i) (0x970 + (_i) * 0x8)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI0_BUF GENMASK(3, 0)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI0(x) ((x) << 0)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI1_BUF GENMASK(7, 4)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI1(x) ((x) << 4)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI2_BUF GENMASK(11, 8)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI2(x) ((x) << 8)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI3_BUF GENMASK(15, 12)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI3(x) ((x) << 12)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI4_BUF GENMASK(19, 16)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI4(x) ((x) << 16)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI5_BUF GENMASK(23, 20)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI5(x) ((x) << 20)
+#define QCA8K_PORT_HOL_CTRL0_EG_PORT_BUF GENMASK(29, 24)
+#define QCA8K_PORT_HOL_CTRL0_EG_PORT(x) ((x) << 24)
+
+#define QCA8K_REG_PORT_HOL_CTRL1(_i) (0x974 + (_i) * 0x8)
+#define QCA8K_PORT_HOL_CTRL1_ING_BUF GENMASK(3, 0)
+#define QCA8K_PORT_HOL_CTRL1_ING(x) ((x) << 0)
+#define QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN BIT(6)
+#define QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN BIT(7)
+#define QCA8K_PORT_HOL_CTRL1_WRED_EN BIT(8)
+#define QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN BIT(16)
+
+/* Pkt edit registers */
+#define QCA8K_EGRESS_VLAN(x) (0x0c70 + (4 * (x / 2)))
+
+/* L3 registers */
+#define QCA8K_HROUTER_CONTROL 0xe00
+#define QCA8K_HROUTER_CONTROL_GLB_LOCKTIME_M GENMASK(17, 16)
+#define QCA8K_HROUTER_CONTROL_GLB_LOCKTIME_S 16
+#define QCA8K_HROUTER_CONTROL_ARP_AGE_MODE 1
+#define QCA8K_HROUTER_PBASED_CONTROL1 0xe08
+#define QCA8K_HROUTER_PBASED_CONTROL2 0xe0c
+#define QCA8K_HNAT_CONTROL 0xe38
+
+/* MIB registers */
+#define QCA8K_PORT_MIB_COUNTER(_i) (0x1000 + (_i) * 0x100)
+
+/* QCA specific MII registers */
+#define MII_ATH_MMD_ADDR 0x0d
+#define MII_ATH_MMD_DATA 0x0e
+
+enum {
+ QCA8K_PORT_SPEED_10M = 0,
+ QCA8K_PORT_SPEED_100M = 1,
+ QCA8K_PORT_SPEED_1000M = 2,
+ QCA8K_PORT_SPEED_ERR = 3,
+};
+
+enum qca8k_fdb_cmd {
+ QCA8K_FDB_FLUSH = 1,
+ QCA8K_FDB_LOAD = 2,
+ QCA8K_FDB_PURGE = 3,
+ QCA8K_FDB_NEXT = 6,
+ QCA8K_FDB_SEARCH = 7,
+};
+
+enum qca8k_vlan_cmd {
+ QCA8K_VLAN_FLUSH = 1,
+ QCA8K_VLAN_LOAD = 2,
+ QCA8K_VLAN_PURGE = 3,
+ QCA8K_VLAN_REMOVE_PORT = 4,
+ QCA8K_VLAN_NEXT = 5,
+ QCA8K_VLAN_READ = 6,
+};
+
+struct ar8xxx_port_status {
+ int enabled;
+};
+
+struct qca8k_match_data {
+ u8 id;
+ bool reduced_package;
+};
+
+enum {
+ QCA8K_CPU_PORT0,
+ QCA8K_CPU_PORT6,
+};
+
+struct qca8k_ports_config {
+ bool sgmii_rx_clk_falling_edge;
+ bool sgmii_tx_clk_falling_edge;
+ bool sgmii_enable_pll;
+ u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
+ u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
+};
+
+struct qca8k_priv {
+ u8 switch_id;
+ u8 switch_revision;
+ bool legacy_phy_port_mapping;
+ struct qca8k_ports_config ports_config;
+ struct regmap *regmap;
+ struct mii_bus *bus;
+ struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS];
+ struct dsa_switch *ds;
+ struct mutex reg_mutex;
+ struct device *dev;
+ struct dsa_switch_ops ops;
+ struct gpio_desc *reset_gpio;
+ unsigned int port_mtu[QCA8K_NUM_PORTS];
+};
+
+struct qca8k_mib_desc {
+ unsigned int size;
+ unsigned int offset;
+ const char *name;
+};
+
+struct qca8k_fdb {
+ u16 vid;
+ u8 port_mask;
+ u8 aging;
+ u8 mac[6];
+};
+
+#endif /* __QCA8K_H */
More information about the lede-commits
mailing list