February 2017 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Feb 1 00:03:54 PST 2017
Ending: Tue Feb 28 23:50:54 PST 2017
Messages: 245

• [PATCH 5/5] ARM i.MX6SL: Add support for the Tolino Vision, Vision2 and Vision3HD   Sascha Hauer
• [PATCH 1/5] ARM i.MX: move cpu_type macros in front of cpu_revision code   Sascha Hauer
  • [PATCH 1/5] ARM i.MX: move cpu_type macros in front of cpu_revision code   Alexander Kurz
    • [PATCH 1/5] ARM i.MX: move cpu_type macros in front of cpu_revision code   Sascha Hauer
• [PATCH] arm: boards: phytec-som-am335x: Remove 1GB RAM type   Daniel Schultz
  • [PATCH] arm: boards: phytec-som-am335x: Remove 1GB RAM type   Sascha Hauer
  • [PATCH] arm: boards: phytec-som-am335x: Remove 1GB RAM type   Sascha Hauer
• squashfs: corrupted kernel image when booting/reading from squashfs   Falco Hyfing
  • squashfs: corrupted kernel image when booting/reading from squashfs   Ulrich Ölmann
    • squashfs: corrupted kernel image when booting/reading from squashfs   Falco Hyfing
• Multiple root file systems   Haris Papadopoulos
  • Multiple root file systems   Uwe Kleine-König
• [PATCH] i.MX: vf610: Add support for ZII VF610 Dev Family   Andrey Smirnov
• [PATCH v2] i.MX: vf610: Add support for ZII VF610 Dev Family   Andrey Smirnov
  • [PATCH v2] i.MX: vf610: Add support for ZII VF610 Dev Family   Sascha Hauer
• i.MX7 Ethernet clock fixes   Sascha Hauer
  • [PATCH 2/9] clk: implement CLK_OPS_PARENT_ENABLE   Sascha Hauer
  • [PATCH 3/9] clk: i.MX: clk-gate2: Allow to pass flags   Sascha Hauer
  • [PATCH 4/9] clk: i.MX: Pass CLK_OPS_PARENT_ENABLE where necessary   Sascha Hauer
  • [PATCH 5/9] clk: i.MX7: do clock reparenting when all clocks are initialized   Sascha Hauer
  • [PATCH 6/9] clk: Add support for shared gates   Sascha Hauer
  • [PATCH 7/9] clk: i.MX7: Fix ethernet clocks   Sascha Hauer
  • [PATCH 8/9] clk: i.MX7: do not register PLL bypass clocks as separate clocks   Sascha Hauer
  • [PATCH 9/9] clk: i.MX7: setup ethernet clocks   Sascha Hauer
• [PATCH 1/9] clk: Keep enable count consistent over reparent   Sascha Hauer
• [PATCH] pinctrl: i.MX7: Fix LPSR sel_imput setting   Sascha Hauer
• [PATCH] ARM: i.MX7: Add imx7s.dtsi   Sascha Hauer
• [PATCH] ARM: i.MX7: Initialize CSU   Sascha Hauer
• Add PSCI support   Sascha Hauer
  • [PATCH 3/4] ARM: Add PSCI support   Sascha Hauer
  • [PATCH 4/4] ARM: i.MX7: Add PSCI support   Sascha Hauer
    • [PATCH 4/4] ARM: i.MX7: Add PSCI support   Andrey Smirnov
      • [PATCH 4/4] ARM: i.MX7: Add PSCI support   Sascha Hauer
      • [PATCH 4/4] ARM: i.MX7: Add PSCI support   Andrey Smirnov
• [PATCH 1/4] ARM: Add UNWIND macro   Sascha Hauer
• [PATCH 2/4] ARM: Add smc call support   Sascha Hauer
• [PATCH 1/2] ARM: phycore-rk3288: Use UART2 as debug output   Wadim Egorov
  • [PATCH 1/2] ARM: phycore-rk3288: Use UART2 as debug output   Sascha Hauer
• [RFC] serial: ns16550: Set read/write functions depending on reg-io-width   Wadim Egorov
  • [RFC] serial: ns16550: Set read/write functions depending on reg-io-width   Wadim Egorov
    • [RFC] serial: ns16550: Set read/write functions depending on reg-io-width   Sascha Hauer
• [PATCH 2/2] config: Set UART port 2 as debug port   Wadim Egorov
• GPLv3 file in barebox   Sascha Hauer
  • GPLv3 file in barebox   Teresa Remmet
    • GPLv3 file in barebox   Sascha Hauer
  • GPLv3 file in barebox   Daniel Schultz
    • GPLv3 file in barebox   Sascha Hauer
• Using LVDS in a iMX6Q/D from Barebox   gianluca
  • Using LVDS in a iMX6Q/D from Barebox   Sascha Hauer
    • Using LVDS in a iMX6Q/D from Barebox   gianluca
      • Using LVDS in a iMX6Q/D from Barebox   gianluca
      • Using LVDS in a iMX6Q/D from Barebox   gianluca
      • Using LVDS in a iMX6Q/D from Barebox   Sascha Hauer
      • Using LVDS in a iMX6Q/D from Barebox   gianluca
      • Using LVDS in a iMX6Q/D from Barebox   Sascha Hauer
      • Using LVDS in a iMX6Q/D from Barebox   gianluca
      • Using LVDS in a iMX6Q/D from Barebox   gianluca
      • Using LVDS in a iMX6Q/D from Barebox   Lucas Stach
      • Using LVDS in a iMX6Q/D from Barebox   gianluca
      • Using LVDS in a iMX6Q/D from Barebox   Sascha Hauer
      • Using LVDS in a iMX6Q/D from Barebox   gianluca
      • Using LVDS in a iMX6Q/D from Barebox   gianluca
      • Using LVDS in a iMX6Q/D from Barebox   Sascha Hauer
      • Using LVDS in a iMX6Q/D from Barebox   gianluca
• v2017.02.0   Sascha Hauer
• [PATCH 0/9] EFI: drop arch efi   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/9] efi: move block io driver to driver/block   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 3/9] efi: move bus driver to driver/efi   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 4/9] efi: move debug_ll.h to include/efi   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 5/9] efi: move startup and payload to common/efi   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 6/9] x86: move bios bootup code to arch/x86/bios   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 7/9] efi: move x86 efi boot support to x86 arch   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 8/9] ARCH: efi: Finally drop it as now we can build efi bootup from x86   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 9/9] efi: bus: add firmware vendor and resision and tables info   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/9] efi: move clocksource out of arch   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 0/9] EFI: drop arch efi   Sascha Hauer
  • [PATCH 0/9] EFI: drop arch efi   Sascha Hauer
    • [PATCH 0/9] EFI: drop arch efi   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] mvebu: make more RAM available from malloc   Uwe Kleine-König
  • [PATCH 1/2] mvebu: make boards pass initial memory size   Uwe Kleine-König
    • [PATCH 1/2] mvebu: make boards pass initial memory size   Sascha Hauer
  • [PATCH 2/2] netgear-rn2120: use complete memory from the start   Uwe Kleine-König
• [USB BOOT] Help needed   Vicente Bergas
  • [USB BOOT] Help needed   Sascha Hauer
    • [USB BOOT] Help needed   Vicente Bergas
• [PATCH 1/2] scripts: kwboot: fix image check for padded images   Uwe Kleine-König
  • [PATCH 2/2] scripts/kwboot: new parameter -n to skip a number of NAKs   Uwe Kleine-König
  • [PATCH 1/2] scripts: kwboot: fix image check for padded images   Sascha Hauer
• [PATCH 1/2] i.MX: i2c: fix i2c-fsl for non-OF boards   Alexander Kurz
  • [PATCH 2/2] i.MX: esdhc: fix imx-esdhc driver for non-OF boards   Alexander Kurz
  • [PATCH 1/2] i.MX: i2c: fix i2c-fsl for non-OF boards   Sascha Hauer
    • [PATCH 1/2] i.MX: i2c: fix i2c-fsl for non-OF boards   Alexander Kurz
• [PATCH] ARM: i.MX7: Add PSCI support   Sascha Hauer
• [PATCH] ARM: i.MX: iim: Only register actually equipped fuses   Sascha Hauer
• barebox PBL question   Wadim Egorov
  • barebox PBL question   Sascha Hauer
    • barebox PBL question   Trent Piepho
      • barebox PBL question   Sascha Hauer
      • barebox PBL question   Trent Piepho
      • barebox PBL question   s.hauer at pengutronix.de
    • barebox PBL question   Wadim Egorov
      • barebox PBL question   Sascha Hauer
      • barebox PBL question   Wadim Egorov
• [PATCH] at91: serial: pullup RX pins, do not pullup TX pins   Peter Rosin
  • [PATCH] at91: serial: pullup RX pins, do not pullup TX pins   Sascha Hauer
• [PATCH] ata: new driver to support the internal sata controller on Armada-XP   Uwe Kleine-König
  • [PATCH] ata: new driver to support the internal sata controller on Armada-XP   Sascha Hauer
• [PATCH 1/3] mvebu: simplify detection and fixup of MV78230-A0   Uwe Kleine-König
  • [PATCH 2/3] mvebu: remove unused function barebox_arm_reset_vector   Uwe Kleine-König
  • [PATCH 3/3] mvebu: rework how memory is detected   Uwe Kleine-König
    • [PATCH 3/3] fixup! mvebu: rework how memory is detected   Uwe Kleine-König
  • [PATCH 4/3] mvebu: armada-370-xp: simplify soc init code flow   Uwe Kleine-König
  • [PATCH 5/3] mvebu: dove: simplify soc init code flow   Uwe Kleine-König
  • [PATCH 6/3] mvebu: kirkwood: simplify soc init code flow   Uwe Kleine-König
    • [PATCH 6/3] mvebu: kirkwood: simplify soc init code flow   Sascha Hauer
• [PATCH] arm: imx: don't let MACH_SABRELITE select HAVE_PBL_MULTI_IMAGES   Uwe Kleine-König
  • [PATCH] arm: imx: don't let MACH_SABRELITE select HAVE_PBL_MULTI_IMAGES   Sascha Hauer
• problems with ext4   Oleksij Rempel
  • problems with ext4   Oleksij Rempel
  • problems with ext4   Sascha Hauer
    • problems with ext4   Oleksij Rempel
      • problems with ext4   Oleksij Rempel
      • problems with ext4   Oleksij Rempel
• [RFC 0/2] sandbox: add gpio support with libftdi1   Antony Pavlov
  • [RFC 2/2] sandbox: add gpio support with libftdi1   Antony Pavlov
  • [RFC 0/2] sandbox: add gpio support with libftdi1   Sascha Hauer
    • [RFC 0/2] sandbox: add gpio support with libftdi1   Antony Pavlov
      • [RFC 0/2] sandbox: add gpio support with libftdi1   Sascha Hauer
    • [RFC 0/2] sandbox: add gpio support with libftdi1   Ian Abbott
• [RFC 1/2] sandbox: avoid symbol conflict for {open,read,close}dir   Antony Pavlov
• [PATCH] mvebu: rn2120: Make available all RAM   Uwe Kleine-König
• [PATCH 0/12] EFI: drop arch efi   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 01/12] efi: move block io driver to driver/block   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 02/12] efi: move clocksource out of arch   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 03/12] efi: move bus driver to driver/efi   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 04/12] efi: move debug_ll.h to include/efi   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 05/12] efi: move startup and payload to common/efi   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 06/12] x86: move bios bootup code to arch/x86/bios   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 07/12] efi: move x86 efi boot support to x86 arch   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 07/12] efi: move x86 efi boot support to x86 arch   Michael Olbrich
      • [PATCH 07/12] efi: move x86 efi boot support to x86 arch   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 07/12] efi: move x86 efi boot support to x86 arch   Sascha Hauer
    • [PATCH 08/12] ARCH: efi: Finally drop it as now we can build efi bootup from x86   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 09/12] efi: bus: add firmware vendor and resision and tables info   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 0/12] EFI: drop arch efi   Michael Olbrich
    • [PATCH 0/12] EFI: drop arch efi   Michael Olbrich
  • [PATCH 10/12] efi: add minor and major to the bus and display it at boot   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 12/12] efi: add efi handle dump command   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 11/12] efi-gui: add Timestamp Protocol GUID definition   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: i.MX50: do not pass base address to imx53_boot_save_loc   Alexander Kurz
  • [PATCH] ARM: i.MX50: do not pass base address to imx53_boot_save_loc   Sascha Hauer
• [PATCH] scripts: imx-usb-loader: implement DCD v2 check command   Alexander Kurz
  • [PATCH] scripts: imx-usb-loader: implement DCD v2 check command   Sascha Hauer
• [PATCH] scripts: mxsimage: Fix build with OpenSSL < 1.1.x   Lucas Stach
  • [PATCH] scripts: mxsimage: Fix build with OpenSSL < 1.1.x   Sascha Hauer
• Fwd: Barebox 2017.02 works great but no Linux Framebuffer... :-/   gianluca
  • Fwd: Barebox 2017.02 works great but no Linux Framebuffer... :-/   gianluca
  • Fwd: Barebox 2017.02 works great but no Linux Framebuffer... :-/   Lucas Stach
    • Fwd: Barebox 2017.02 works great but no Linux Framebuffer... :-/   gianluca
• [PATCH] lib: xz: add support for bcj filters   yegorslists at googlemail.com
  • [PATCH] lib: xz: add support for bcj filters   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH] lib: xz: add support for bcj filters   Yegor Yefremov
      • [PATCH] lib: xz: add support for bcj filters   Sascha Hauer
      • [PATCH] lib: xz: add support for bcj filters   Yegor Yefremov
      • [PATCH] lib: xz: add support for bcj filters   Sascha Hauer
      • [PATCH] lib: xz: add support for bcj filters   Yegor Yefremov
      • [PATCH] lib: xz: add support for bcj filters   Sascha Hauer
• [PATCH v2] lib: xz: add support for bcj filters   yegorslists at googlemail.com
  • [PATCH v2] lib: xz: add support for bcj filters   Sascha Hauer
• [PATCH] mvebu: Fix fixup of mbus device-tree ranges   Uwe Kleine-König
  • [PATCH] mvebu: Fix fixup of mbus device-tree ranges   Sascha Hauer
    • [PATCH] mvebu: Fix fixup of mbus device-tree ranges   Uwe Kleine-König
• [PATCH] usb: gadget: fastboot: close fd after download   Sascha Hauer
• [PATCH 1/2] i2c: mv64xxx: add software delays   Bastian Stender
  • [PATCH 1/2] i2c: mv64xxx: add software delays   Sascha Hauer
• [PATCH 2/2] i2c: mv64xxx: simplify mv64xxx_i2c_wait_for_completion   Bastian Stender
• [PATCH 1/3] graphic_utils: implement 8 bpp color depth in gu_set_pixel   Bastian Stender
  • [PATCH 3/3] 2d-primitives: check dimensions in __illuminate   Bastian Stender
  • [PATCH 1/3] graphic_utils: implement 8 bpp color depth in gu_set_pixel   Sascha Hauer
• [PATCH 2/3] graphic_utils: do not allocate info in fb_open   Bastian Stender
• [PATCH] lib/fonts: add VGA8x8 font   Bastian Stender
  • [PATCH] lib/fonts: add VGA8x8 font   Sascha Hauer
    • [PATCH] lib/fonts: add VGA8x8 font   Ian Abbott
• [PATCH 1/2] fbconsole: check cursor position before moving   Bastian Stender
  • [PATCH 2/2] fbconsole: implement vt100 cursor shown/hidden   Bastian Stender
  • [PATCH 1/2] fbconsole: check cursor position before moving   Sascha Hauer
    • [PATCH 1/2] fbconsole: check cursor position before moving   Ian Abbott
      • [PATCH 1/2] fbconsole: check cursor position before moving   Bastian Stender
      • [PATCH v2] fbconsole: check cursor position before moving   Bastian Stender
      • [PATCH v2] fbconsole: check cursor position before moving   Sascha Hauer
      • [PATCH v3] fbconsole: check cursor position before moving   Bastian Stender
      • [PATCH v3] fbconsole: check cursor position before moving   Ian Abbott
      • [PATCH v3] fbconsole: check cursor position before moving   Ian Abbott
      • [PATCH v3] fbconsole: check cursor position before moving   Sascha Hauer
• [PATCH] lseek: ensure errno is set on failure and return -1   Uwe Kleine-König
  • [PATCH] lseek: ensure errno is set on failure and return -1   Sascha Hauer
    • [PATCH] lseek: ensure errno is set on failure and return -1   Uwe Kleine-König
• mw crash   Chris Healy
  • mw crash   Uwe Kleine-König
• [PATCH 0/4] Prepare consoles, add fb flush and Solomon SSD1307 OLED controller support   Bastian Stender
  • [PATCH 1/4] console: replace set_active by open/close   Bastian Stender
    • [PATCH 1/4] console: replace set_active by open/close   Sascha Hauer
      • [PATCH v2] console: replace set_active by open/close   Bastian Stender
      • [PATCH v2] console: replace set_active by open/close   Sascha Hauer
  • [PATCH 2/4] console: expose consoles in devfs   Bastian Stender
    • [PATCH 2/4] console: expose consoles in devfs   Sascha Hauer
      • [PATCH v2] console: expose consoles in devfs   Bastian Stender
      • [PATCH v2] console: expose consoles in devfs   Sascha Hauer
  • [PATCH 3/4] fb: introduce flush for virtual framebuffer   Bastian Stender
  • [PATCH 4/4] video: add support for Solomon SSD1307 OLED controller family   Bastian Stender
    • [PATCH 4/4] video: add support for Solomon SSD1307 OLED controller family   Bastian Stender
    • [PATCH 4/4] video: add support for Solomon SSD1307 OLED controller family   Sascha Hauer
      • [PATCH 4/4] video: add support for Solomon SSD1307 OLED controller family   Bastian Stender
      • [PATCH 4/4] video: add support for Solomon SSD1307 OLED controller family   Sascha Hauer
• [PATCH v2 3+0/3] retry on simplification of init code flow   Uwe Kleine-König
  • [PATCH v2 5/3] mvebu: dove: simplify soc init code flow   Uwe Kleine-König
  • [PATCH v2 6/3] mvebu: kirkwood: simplify soc init code flow   Uwe Kleine-König
  • [PATCH v2 3+0/3] retry on simplification of init code flow   Sascha Hauer
• [PATCH v2 4/3] mvebu: armada-370-xp: simplify soc init code flow   Uwe Kleine-König
• [PATCH 0/4] mvebu: Make 2nd-stage booting possible   Uwe Kleine-König
  • [PATCH 0/4] mvebu: Make 2nd-stage booting possible   Sascha Hauer
    • [PATCH 0/4] mvebu: Make 2nd-stage booting possible   Uwe Kleine-König
• [PATCH 1/4] mvebu: get initial position of register window from image header   Uwe Kleine-König
• [PATCH 2/4] filetype: Add image type for boot images used on Armada 370 and XP   Uwe Kleine-König
• [PATCH 3/4] kwbimage_v1: add support to boot a mvebu image   Uwe Kleine-König
• [PATCH 4/4] mvebu: netgear-rn2120: make use of mvebu_get_initial_int_reg_base   Uwe Kleine-König
• Zyxel NAS540 bricked?   AndrewCz
  • Zyxel NAS540 bricked?   Sascha Hauer
• [PATCH 0/8] add generic EFI timer   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/8] efi: add prototype and definition for creating and closing event   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 2/8] efi: add prototype and definition for setting timer   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 3/8] efi: move LoaderTimeInitUSec and LoaderDevicePartUUID to postcore initcall   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 4/8] efi: move x86 clocksource init at core initcall level   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 5/8] clocksource: allow to have multiple device from clock source   Jean-Christophe PLAGNIOL-VILLARD
      • [PATCH 5/8] clocksource: allow to have multiple device from clock source   Sascha Hauer
    • [PATCH 6/8] efi: move x86 clocksource to device/driver   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 7/8] efi: clocksoure: use event for timer   Jean-Christophe PLAGNIOL-VILLARD
    • [PATCH 8/8] efi: add veriable to report secure boot support and status   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 0/4] Prepare consoles, add fb flush and Solomon SSD1307 OLED controller support   Bastian Stender
  • [PATCH v2 1/4] console: replace set_active by open/close   Bastian Stender
  • [PATCH v2 2/4] console: expose consoles in devfs   Bastian Stender
  • [PATCH v2 3/4] fb: introduce flush for virtual framebuffer   Bastian Stender
  • [PATCH v2 4/4] video: add support for Solomon SSD1307 OLED controller family   Bastian Stender
  • [PATCH v2 0/4] Prepare consoles, add fb flush and Solomon SSD1307 OLED controller support   Sascha Hauer
• [PATCH v2] arm: boards: phytec-som-am335x: Remove 1GB RAM type   Daniel Schultz

Last message date: Tue Feb 28 23:50:54 PST 2017
Archived on: Tue Feb 28 23:51:21 PST 2017

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...