[PATCH v2 0/4] Prepare consoles, add fb flush and Solomon SSD1307 OLED controller support
Sascha Hauer
s.hauer at pengutronix.de
Tue Feb 28 23:03:36 PST 2017
On Tue, Feb 28, 2017 at 03:31:23PM +0100, Bastian Stender wrote:
> Changes since last version:
>
> console: replace set_active by open/close
> - use a counter rather than flags
> - inrease counter independent of the presence of the cdev->open() hook
>
> console: expose consoles in devfs
> - test for presence before using flush hook
>
> video: add support for Solomon SSD1307 OLED controller family
> - remove pwm dependency and SSD1307 compatibility
> - use tabs and spaces consistently
> - remove unnecessary 'struct ssd1307fb_par'
> - remove unnecessary xzalloc check
> - bail out if any of the *required* device tree properties are missing
> - replace errno on gpio failure with error string
> - remove obsolete printk include
>
> Bastian Stender (4):
> console: replace set_active by open/close
> console: expose consoles in devfs
> fb: introduce flush for virtual framebuffer
> video: add support for Solomon SSD1307 OLED controller family
Applied, thanks
Sascha
>
> commands/fbtest.c | 1 +
> common/console.c | 99 +++++++-
> drivers/video/Kconfig | 4 +
> drivers/video/Makefile | 1 +
> drivers/video/fb.c | 26 +++
> drivers/video/fbconsole.c | 31 ++-
> drivers/video/ssd1307fb.c | 566 ++++++++++++++++++++++++++++++++++++++++++++++
> include/console.h | 10 +-
> include/fb.h | 2 +
> net/netconsole.c | 27 ++-
> 10 files changed, 744 insertions(+), 23 deletions(-)
> create mode 100644 drivers/video/ssd1307fb.c
>
> --
> 2.11.0
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list