September 2010 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Wed Sep 1 02:42:35 EDT 2010
Ending: Thu Sep 30 23:40:58 EDT 2010
Messages: 229

• barebox: write a file to /dev/ubi0   Nataraj S Narayan
• barebox: write a file to /dev/ubi0   Baruch Siach
• [PATCH 0/9] preperation for sh adding   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/9] types.h: move __kernel_dev_t to include/linux/types.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/9] device: fix dev_name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/9] stm8815: fix the uart device clock match   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/9] arm: move clkdev to drivers/clk   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/9] vsprintf: add %w and %w support to print unit   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/9] at91/clock: switch to %w for clock info printing   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/9] cfi_flash: use %W and IEEE 1541 format   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/9] use %W instead of size_human_readable and use IEEE 1541 format   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 9/9] clkdev: add print clk info command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 9/9] clkdev: add print clk info command   Uwe Kleine-König
• [PATCH 5/9] vsprintf: add %w and %w support to print unit   Uwe Kleine-König
• [PATCH 5/9] vsprintf: add %w and %w support to print unit   Uwe Kleine-König
• [PATCH 5/9] vsprintf: add %w and %w support to print unit   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/9] vsprintf: add %w and %w support to print unit   Uwe Kleine-König
• [PATCH 0/9 V2] preperation for sh adding   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/9 V2] types.h: move __kernel_dev_t to include/linux/types.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/9 V2] device: fix dev_name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/9 V2] stm8815: fix the uart device clock match   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/9 V2] arm: move clkdev to drivers/clk   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/9 V2] vsprintf: add %w and %w support to print unit   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/9 V2] at91/clock: switch to %w for clock info printing   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/9 V2] cfi_flash: use %W and IEEE 1541 format   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/9 V2] use %W instead of size_human_readable and use IEEE 1541 format   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 9/9 V2] clkdev: add print clk info command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/9 V2] vsprintf: add %w and %w support to print unit   Uwe Kleine-König
• [PATCH] Menu: add box stype entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2] Menu: add box style entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] init: introduce __BARE_INIT for .section ".text_bare_init.text"   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/18] add sh support and st40 primarly support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] init: introduce __BARE_INIT for .section ".text_bare_init.text"   Sam Ravnborg
• [PATCH 1/2] menu: shell fix do_menu_select   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] menu: add auto select support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2 v2] menu: add auto select support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2] Menu: add box style entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] Menu: add box style entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] Menu: add box style entry   Jean-Christophe PLAGNIOL-VILLARD
• a9m2440_defconfig failed to compile   Belisko Marek
• a9m2440_defconfig failed to compile   Juergen Beisert
• a9m2440_defconfig failed to compile   Belisko Marek
• a9m2440_defconfig failed to compile   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mach-s3c24xx: Fix compilation problem when make a9m2410 or a9m2440 defconfig.   Marek Belisko
• [PATCH] mach-s3c24xx: Fix compilation problem when make a9m2410 or a9m2440 defconfig.   Juergen Beisert
• [PATCH] mach-s3c24xx: Fix compilation problem when make a9m2410 or a9m2440 defconfig.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mach-s3c24xx: Fix compilation problem when make a9m2410 or a9m2440 defconfig.   Belisko Marek
• [PATCH] mach-s3c24xx: Fix compilation problem when make a9m2410 or a9m2440 defconfig.   Juergen Beisert
• [PATCH] mach-s3c24xx: Fix compilation problem when make a9m2410 or a9m2440 defconfig.   Peter Korsgaard
• [PATCH] mach-s3c24xx: Fix compilation problem when make a9m2410 or a9m2440 defconfig.   Juergen Beisert
• Mentor Inventra USB Contoller driver   Gaurav Singh
• Generating barebox.S   Teresa Gamez
• Generating barebox.S   Juergen Beisert
• [PATCH 0/7] Digest and login/password Frameworks   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] add digest framework   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] add md5 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] add sha1 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] add sha256 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] add password framework   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] add passwd command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] add login support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/7] Digest and login/password Frameworks   Jean-Christophe PLAGNIOL-VILLARD
• storing barebox to flash /dev/nand0   Belisko Marek
• storing barebox to flash /dev/nand0   Abdoulaye Walsimou Gaye
• storing barebox to flash /dev/nand0   Juergen Beisert
• storing barebox to flash /dev/nand0   Jean-Christophe PLAGNIOL-VILLARD
• storing barebox to flash /dev/nand0   Belisko Marek
• storing barebox to flash /dev/nand0   Belisko Marek
• storing barebox to flash /dev/nand0   Juergen Beisert
• storing barebox to flash /dev/nand0   Belisko Marek
• storing barebox to flash /dev/nand0   Jean-Christophe PLAGNIOL-VILLARD
• storing barebox to flash /dev/nand0   Belisko Marek
• storing barebox to flash /dev/nand0   Abdoulaye Walsimou Gaye
• storing barebox to flash /dev/nand0   Robert Schwebel
• storing barebox to flash /dev/nand0   Belisko Marek
• [PATCH 1/4] driver: allow register device with specific id   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] device: fix dev_name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] amba-pl011: probe fail if we can get the clock   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] stm8815: fix the uart device clock match   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] init: introduce __BARE_INIT for .section ".text_bare_init.text"   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] amba-pl011: probe fail if we can get the clock   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] i2c rename CONFIG_DRIVER_I2C_xx to CONFIG_I2C_xx   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] i2c: move busses to drivers/i2c/busses   Jean-Christophe PLAGNIOL-VILLARD
• WATCHDOG question   James Robinson
• WATCHDOG question   Marc Kleine-Budde
• [PATCH 0/3] add generic polling infrastructure   Marc Kleine-Budde
• [PATCH 1/3] poller: add poller support   Marc Kleine-Budde
• [PATCH 2/3] clock: add poller call to is_timeout()   Marc Kleine-Budde
• [PATCH 3/3] unlzo: add poller call to unlzo routine   Marc Kleine-Budde
• [PATCH 1/3] poller: add poller support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] poller: add poller support   Marc Kleine-Budde
• [PATCH] configs: use new savedefconfig format as in linux   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/9 V2] preperation for sh adding   Sascha Hauer
• [PATCH V2] Menu: add box style entry   Sascha Hauer
• [PATCH] init: introduce __BARE_INIT for .section ".text_bare_init.text"   Sascha Hauer
• [PATCH] init: introduce __BARE_INIT for .section ".text_bare_init.text"   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2] Menu: add box style entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2] Menu: add box style entry   Sascha Hauer
• [PATCH 2/2] menu: add auto select support   Sascha Hauer
• [PATCH 2/7] add md5 support   Sascha Hauer
• [PATCH 3/7] add sha1 support   Sascha Hauer
• [PATCH 2/2] menu: add auto select support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] add sha1 support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2] Menu: add box style entry   Jean-Christophe PLAGNIOL-VILLARD
• dos file support.   James Robinson
• [PATCH 1/5] gitignore: update generated link and file   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] move version.h to include/generated/ instead of include/linux   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] move utsrelease.h to include/generated/ instead of include/linux   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] arm: move mach-types.h to include/generated/   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] move barebox_default_env.h to include/generated/   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] add md5 support   Jean-Christophe PLAGNIOL-VILLARD
• PULL request fix and sh-prepare and Digest and login/password Frameworks   Jean-Christophe PLAGNIOL-VILLARD
• changes for reducing DDR size   kuldeep ghan
• [PATCH 1/1] Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] driver: allow register device with specific id   Sascha Hauer
• [PATCH 1/3 v3] menu: shell fix do_menu_select   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3 v3] menu: add auto select support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3 v3] Menu: add box style entry   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] driver: allow register device with specific id   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] amba-pl011: probe fail if we can get the clock   Sascha Hauer
• [PATCH 3/4] amba-pl011: probe fail if we can get the clock   Sascha Hauer
• [PATCH 1/4] driver: allow register device with specific id   Sascha Hauer
• [PATCH 3/4] amba-pl011: probe fail if we can get the clock   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] driver: allow register device with specific id   Jean-Christophe PLAGNIOL-VILLARD
• Mentor Inventra USB Contoller driver   Sascha Hauer
• [PATCH] driver: use id as -1 for auto assigned id   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] at91: add HAVE_NAND_ATMEL_BUSWIDTH_16 to Enable 16-bit data bus interface   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] at91sam9263: move MACH_HAS_LOWLEVEL_INIT to board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3 v2] Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.   Jean-Christophe PLAGNIOL-VILLARD
• Using barebox to replace u-boot on OMAPs   Anand Gadiyar
• Using barebox to replace u-boot on OMAPs   Michael Grzeschik
• dm9601 USB Network Controller   Nataraj S Narayan
• dm9601 USB Network Controller   Jean-Christophe PLAGNIOL-VILLARD
• dm9601 USB Network Controller   Jean-Christophe PLAGNIOL-VILLARD
• dm9601 USB Network Controller   Peter Korsgaard
• [PATCH 1/2] sha1: use unit32_t and uint8_t   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm: allow to overwrite the system_rev via bootm   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm: allow to overwrite the system_rev via bootm   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] nhk8815: update defconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] commands/crc32: add compare 2 files crc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2 v2] nhk8815: update defconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] nhk8815: rename nand parts uboot as barebox   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] commands/crc32: add compare 2 files crc   Sascha Hauer
• [PATCH] commands/crc32: add compare 2 files crc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] commands/crc32: add compare 2 files crc   Peter Korsgaard
• [PATCH] commands/crc32: add compare 2 files crc   Sascha Hauer
• [PATCH] commands/crc32: add compare 2 files crc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] commands/crc32: add compare 2 files crc   Sascha Hauer
• [PATCH] commands/crc32: add compare 2 files crc   Peter Korsgaard
• [PATCH 1/2] image: factorise string helper   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] image: rename IH_CPU to IH_ARCH to be more concistant   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mach-s3c24xx: Fix compilation problem when make a9m2410 or a9m2440 defconfig.   Juergen Beisert
• [PATCH 1/5] image: factorise string helper   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/5] image: rename IH_CPU to IH_ARCH to be more concistant   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] host: introduce compiler.h to handle host include   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] image: Replace direct header access with the API routines   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/5] image: factorise image printing contents   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] commands/crc32: add compare 2 files crc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3 v2] host: introduce compiler.h to handle host include   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3 v2] Replace direct header access with the API routines   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3 v2] image: factorise image printing contents   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] netconsole: remove non-needed setbaudrate   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] console: set device_d id at -1   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32   Andre
• [PATCH 1/3] blackfin: remove duplicated PAGE_SIZE define   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] ipe337: fix default env   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] mk68: rename macro __M68K__ to __m68k__ as it's prodive by gcc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] device: introduce resource structure to simplify resource delaration   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] ram device: use resource structure instead of memory_platform_data   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32   Sascha Hauer
• [PATCH 1/2] device: introduce resource structure to simplify resource delaration   Sascha Hauer
• [PATCH 1/2] device: introduce resource structure to simplify resource delaration   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32   Andre
• [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] imx/fb: struct imx_ipu_fb_platform_data remove const for mode   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] imx-ipu-fb: set default bits per pixel at 16 for mx3   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] pcm038: fix initialization makes pointer from integer without a cast   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32   Sascha Hauer
• [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32   Sascha Hauer
• [PATCH] Fix watchdog's register size for the i.MX27 CPU   Juergen Beisert
• [PATCH 2/2] sha1/sha256: use be32_to_cpu and cpu_to_be32   Sascha Hauer
• The i.MX27 has no second leve cache, remove include file   Juergen Beisert
• [PATCH] Fix watchdog's register size for the i.MX27 CPU   Juergen Beisert
• [PATCH] Fix watchdog's register size for the i.MX27 CPU   Juergen Beisert
• The i.MX27 has no second leve cache, remove include file   Uwe Kleine-König
• [PATCH] The i.MX27 has no second level cache, remove include file (Subject fixed)   Juergen Beisert
• The i.MX27 has no second leve cache, remove include file   Juergen Beisert
• [PATCH] MAKEALL: make it generic   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] MAKEALL: make it generic   Mike Frysinger
• [PATCH] MAKEALL: make it generic   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] MAKEALL: make it generic   Mike Frysinger
• [PATCH] Fix default baudrate setting   Juergen Beisert
• [PATCH] Fix default baudrate setting   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Fix default baudrate setting   Marc Kleine-Budde
• [PATCH 1/3] linux16: fix cmd_tbl_t as struct command   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] x86: add 64bit host build support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] x86: fix out of tree build support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] MAKEALL: make it generic   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] Fix default baudrate setting   Sascha Hauer
• [PATCH] import __stringify from linux   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] MAKEALL: make it generic   Sascha Hauer
• [PATCH v2] MAKEALL: make it generic   Jean-Christophe PLAGNIOL-VILLARD
• No subject  
• No subject  
• Failing to load Barebox Environment   Gaurav Singh
• Failing to load Barebox Environment   Juergen Beisert
• [PATCH v2] MAKEALL: make it generic   Sascha Hauer
• Failing to load Barebox Environment   Sascha Hauer
• Failing to load Barebox Environment   Gaurav Singh
• Failing to load Barebox Environment   Juergen Beisert
• Failing to load Barebox Environment   Gaurav Singh
• Failing to load Barebox Environment   Juergen Beisert
• Failing to load Barebox Environment   Gaurav Singh
• Failing to load Barebox Environment   Gaurav Singh
• [PATCH v2] MAKEALL: make it generic   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] MAKEALL: make it generic   Sascha Hauer
• Failing to load Barebox Environment   Gaurav Singh
• [PATCH] at91sam9260/at91sam9263: use the same id as in the kernel for the uart devices   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3] MAKEALL: make it generic   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] imx35: add base addresses for I2C and SDHC   Marc Reilly
• [PATCH] i2c-imx: wait for STOP before disabling controller   Marc Reilly
• [PATCH] i2c-imx: wait for STOP before disabling controller   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] imx: Internal boot sources, handle all header offsets   Marc Reilly
• [PATCH 2/2] Update flash headers for boards supporting internal boot.   Marc Reilly

Last message date: Thu Sep 30 23:40:58 EDT 2010
Archived on: Thu Sep 30 23:41:48 EDT 2010

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...