[PATCH] mach-s3c24xx: Fix compilation problem when make a9m2410 or a9m2440 defconfig.

Juergen Beisert jbe at pengutronix.de
Wed Sep 8 06:01:01 EDT 2010


Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 20:52 Tue 07 Sep     , Marek Belisko wrote:
> > Following steps lead to compilation error (barebox v2010.09.0):
> >
> > 1. make a9m2440_defconfig (or a9m2410) ARCH=arm
> > 2. make CROSS_COMPILE=arm-linux- ARCH=arm
> >
> > This patch should fix problems.
> >
> > Signed-off-by: Marek Belisko <marek.belisko at open-nandra.com>
> > ---
> >  arch/arm/mach-s3c24xx/Kconfig |    4 +++-
> >  1 files changed, 3 insertions(+), 1 deletions(-)
> >
> > diff --git a/arch/arm/mach-s3c24xx/Kconfig
> > b/arch/arm/mach-s3c24xx/Kconfig index 37ccf2f..297fdbb 100644
> > --- a/arch/arm/mach-s3c24xx/Kconfig
> > +++ b/arch/arm/mach-s3c24xx/Kconfig
> > @@ -81,7 +81,9 @@ config S3C24XX_SDRAM_INIT
> >  config S3C24XX_NAND_BOOT
> >  	bool
> >  	prompt "Booting from NAND"
> > -	select NAND_S3C24X0
> > +	select MTD
> > +	select NAND
> > +	select NAND_S3C24X0
>
> you should be able to boot from nand only if you enable the NAND and not
> the invert

Hmm, you can enable NAND support, but you may do not want to boot from it. 
IMHO its correct in this way.

jbe

-- 
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |



More information about the barebox mailing list