[PATCH] mach-s3c24xx: Fix compilation problem when make a9m2410 or a9m2440 defconfig.

[Jean-Christophe PLAGNIOL-VILLARD]

On 20:52 Tue 07 Sep     , Marek Belisko wrote:
> Following steps lead to compilation error (barebox v2010.09.0):
> 
> 1. make a9m2440_defconfig (or a9m2410) ARCH=arm
> 2. make CROSS_COMPILE=arm-linux- ARCH=arm
> 
> This patch should fix problems.
> 
> Signed-off-by: Marek Belisko <marek.belisko at open-nandra.com>
> ---
>  arch/arm/mach-s3c24xx/Kconfig |    4 +++-
>  1 files changed, 3 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
> index 37ccf2f..297fdbb 100644
> --- a/arch/arm/mach-s3c24xx/Kconfig
> +++ b/arch/arm/mach-s3c24xx/Kconfig
> @@ -81,7 +81,9 @@ config S3C24XX_SDRAM_INIT
>  config S3C24XX_NAND_BOOT
>  	bool
>  	prompt "Booting from NAND"
> -	select NAND_S3C24X0
> +	select MTD
> +	select NAND
> +	select NAND_S3C24X0

you should be able to boot from nand only if you enable the NAND and not the
invert

so it's a depends on

Best Regards,
J.