May 2014 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu May 1 00:48:33 PDT 2014
Ending: Fri May 30 03:03:53 PDT 2014
Messages: 467

• [PATCH 00/11] ARM: add initial support for Rockchip boards   Beniamino Galvani
• [PATCH 0/4] barebox_arm_entry signature change   Lucas Stach
• [PATCH 1/4] ARM: change signature of barebox_arm_entry   Lucas Stach
• [PATCH 2/4] ARM: beaglebone: remove extra FDT memcpy   Lucas Stach
• [PATCH 3/4] ARM: eDM-QMX6: remove extra FDT memcpy   Lucas Stach
• [PATCH 4/4] ARM: phycore-am33xx: remove extra FDT memcpy   Lucas Stach
• [PATCH] ARM: imx: move malloc area to upper memory bank by default   Lucas Stach
• [PATCH 1/2] ARM: bootm: be more clever while deciding where to put zImage   Lucas Stach
• [PATCH 2/2] ARM: bootm: fix default uImage placement   Lucas Stach
• New driver crashes with "unable to handle paging request"   Christoph Fritz
• bootloader bwPollTimeout quirk in dfu-util   Tormod Volden
• [PATCH] mtd: nand-bb: use list_for_each_entry_safe   Alexander Aring
• [PATCH] imx:mmdc:Move imx6-reg include to imx6-mmdc header   Sascha Hauer
• [PATCH 1/3] tftp: add timeframe when remote server is retransmitting   Sascha Hauer
• [PATCH 2/3] net cpsw: fix rx stability under heavy network load   Sascha Hauer
• [PATCH 3/3] net cpsw: check phy status on send and receive   Sascha Hauer
• [PATCH] make: dts: fix out-of-tree build   Sascha Hauer
• [PATCH] Add Linux dts files and use them   Sascha Hauer
• [PATCH 3/3] net cpsw: check phy status on send and receive   Christoph Fritz
• v2014.05.0   Sascha Hauer
• TODO: Rewrite network stack.   Antony Pavlov
• New driver crashes with "unable to handle paging request"   Rolf Evers-Fischer
• TODO: Rewrite network stack.   Alessandro Rubini
• TODO: Rewrite network stack.   Antony Pavlov
• TODO: Rewrite network stack.   Sascha Hauer
• Re: [PATCH] Add Linux dts files and use them   Alexander Shiyan
• boot command is broken?   Wjatscheslaw Stoljarski (Slawa)
• [PATCH] Add Linux dts files and use them   Sascha Hauer
• Re: [PATCH] Add Linux dts files and use them   Alexander Shiyan
• boot command is broken?   Sascha Hauer
• [PATCH] stdlib.h: include missed types.h   Antony Pavlov
• [PATCH] rework dts file for edmqmx6   Silvio Fricke
• [PATCH] ARM: i.MX6: dts: edmqmx6: use new dts approach   Silvio Fricke
• Timeout on downloading images   Ivor Kruger
• Image loading via USB broken?   Holger Schurig
• Image loading via USB broken?   Sascha Hauer
• Image loading via USB broken?   Holger Schurig
• [PATCH] ARM: phycard-imx6: fixup for barebox_arm_entry signature change   Lucas Stach
• [PATCH] stdlib.h: include missed types.h   Sascha Hauer
• [PATCH] rework dts file for edmqmx6   Sascha Hauer
• [PATCH] ARM: phycard-imx6: fixup for barebox_arm_entry signature change   Sascha Hauer
• [PATCH 01/14] pinctrl: i.MX iomux-v3: Print more context in error message   Sascha Hauer
• [PATCH 02/14] ARM: i.MX: bbu: remove dcd arguments from bbu registration   Sascha Hauer
• [PATCH 03/14] ARM: tqma53: Add barebox_update support   Sascha Hauer
• [PATCH 04/14] ARM: i.MX53: Use clock number defines from dt-bindings   Sascha Hauer
• [PATCH 05/14] ARM: tqma53: Add phy_type property to usb ports   Sascha Hauer
• [PATCH 06/14] ARM: i.MX53: Add pwm support   Sascha Hauer
• [PATCH 07/14] ARM: i.MX53 tqma53: Set model from devicetree   Sascha Hauer
• [PATCH 08/14] ARM: i.MX: implement pllv2 set/round_rate support   Sascha Hauer
• [PATCH 09/14] video: i.MX IPUv3: remove debug leftover   Sascha Hauer
• [PATCH 10/14] video: i.MX IPUv3: Print error as string   Sascha Hauer
• [PATCH 11/14] video: i.MX IPUv3: Implement i.MX5 IPU reset support   Sascha Hauer
• [PATCH 12/14] video: i.MX IPUv3 ldb: implement i.MX53 support   Sascha Hauer
• [PATCH 13/14] ARM: i.MX5: Add IPU clocks   Sascha Hauer
• [PATCH 14/14] ARM: dts: i.MX53: Add ipu alias   Sascha Hauer
• [PATCH] mtd: nand-bb: use list_for_each_entry_safe   Sascha Hauer
• [PATCH] rework dts file for edmqmx6   Sascha Hauer
• [PATCH 1/2] ARM: i.MX: Phytec-phyCARD-i.MX27: Switch to multi-image support   Sascha Hauer
• [PATCH 2/2] ARM: create a imx_defconfig   Sascha Hauer
• [PATCH v2] ARM: i.MX6: dts: edmqmx6: use new dts approach   Lucas Stach
• [PATCH v2] ARM: i.MX6: dts: edmqmx6: use new dts approach   S. Fricke
• Не упустите возможность повысить прибыльность вашего сайта lists.infradead.org   Иван
• [PATCH 1/2] ARM: tegra30: slow down CPU to 600 MHz   Lucas Stach
• [PATCH 2/2] ARM: tegra30: ramp vdd_core to 1,2V   Lucas Stach
• [PATCH] Catch errors when mounting invalid cramfs partitions.   Owen Kirby
• [PATCH] fix i.MX51 babbage ethernet   Sascha Hauer
• [PATCH 1/5] mfd: mc13xxx: Allow to set callback for mc13xxx   Sascha Hauer
• [PATCH 2/5] spi: i.MX: Move to coredevice_initcall   Sascha Hauer
• [PATCH 3/5] mfd: mc13xxx: move to coredevice_initcall   Sascha Hauer
• [PATCH 4/5] ARM: i.MX51 babbage: use mc13xxx_register_callback to initialize PMIC   Sascha Hauer
• [PATCH 5/5] ARM: dts: i.MX51 babbage: overwrite upstream FEC iomux settings   Sascha Hauer
• TODO: Rewrite network stack.   Uwe Kleine-König
• [PATCH 1/2] ARM: tegra30: slow down CPU to 600 MHz   Sascha Hauer
• [PATCH v2] ARM: i.MX6: dts: edmqmx6: use new dts approach   Sascha Hauer
• [PATCH] Add Linux dts files and use them   Sascha Hauer
• TODO: Rewrite network stack.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: dts: i.MX53: tqma53: Readd barebox specifics   Michael Olbrich
• TODO: Rewrite network stack.   Antony Pavlov
• [PATCH 1/1] Update DCD to support newer Variscite iMX6 SOM's DDR3 timing   Michael D. Burkey
• [PATCH 1/1] Add variable USB status polling delay to fix issues with USB flash drives.   Michael D. Burkey
• [PATCH 1/1] Correct BMP renderer to support arbitrary sized files in Microsoft BMP format.   Michael D. Burkey
• [PATCH 1/1] Update ubirmvol command to allow directly specifying the device node.   Michael D. Burkey
• [PATCH 1/1] Add option to OCOTP to retrieve iMX6 CPU serial #.   Michael D. Burkey
• [PATCH] Fix the options and protocols used by the loadx command.   Owen Kirby
• [PATCH 0/5] ARM: initial support for RC Module UEMD SoCs and MB 77.07 board   Sascha Hauer
• [PATCH 1/1] Add variable USB status polling delay to fix issues with USB flash drives.   Sascha Hauer
• [PATCH] Fix the options and protocols used by the loadx command.   Sascha Hauer
• [PATCH 0/5] ARM: initial support for RC Module UEMD SoCs and MB 77.07 board   Antony Pavlov
• [PATCH] Add readmem command to read values out of memory.   Owen Kirby
• [PATCH] Fix the options and protocols used by the loadx command.   Owen Kirby
• [PATCH] Add readmem command to read values out of memory.   Antony Pavlov
• [PATCH] Kconfig: Fix menuconfig build   Franck Jullien
• [PATCH] openrisc: move ethoc registration to device_initcall   Franck Jullien
• Re: [PATCH 2/5] spi: i.MX: Move to coredevice_initcall   Alexander Shiyan
• [PATCH] Kconfig: Fix menuconfig build   Sascha Hauer
• [PATCH] openrisc: move ethoc registration to device_initcall   Sascha Hauer
• [PATCH] Add readmem command to read values out of memory.   Sascha Hauer
• [PATCH] Kconfig: Fix menuconfig build   Franck Jullien
• [PATCH 00/25] Tegra-next   Lucas Stach
• [PATCH 01/25] reset: add reset controller framework   Lucas Stach
• [PATCH 02/25] tegra: lowlevel: add function to fetch chipid   Lucas Stach
• [PATCH 03/25] reset: add tegra reset controller   Lucas Stach
• [PATCH 04/25] clk: tegra: reset UARTS from clock controller   Lucas Stach
• [PATCH 05/25] mci: tegra: add reset control   Lucas Stach
• [PATCH 06/25] clk: tegra: remove device reset hack   Lucas Stach
• [PATCH 07/25] clk: tegra: allow to register clocks with 16 bit divider   Lucas Stach
• [PATCH 08/25] clk: tegra30: register i2c clocks   Lucas Stach
• [PATCH 09/25] clk: tegra20: register i2c clocks   Lucas Stach
• [PATCH 10/25] i2c: add Tegra driver   Lucas Stach
• [PATCH 11/25] ARM: tegra: beaver: activate sdmmc1 voltage rail   Lucas Stach
• [PATCH 12/25] ARM: tegra: beaver: adjust pinmux to make sdmmc1 work   Lucas Stach
• [PATCH 13/25] mci: tegra: apply pad autocalibration on T30   Lucas Stach
• [PATCH 14/25] mci: tegra: don't set 8bit mode unconditionally   Lucas Stach
• [PATCH 15/25] pinctrl: tegra30: parse drive groups   Lucas Stach
• [PATCH 16/25] scripts: tegra: import cbootimage   Lucas Stach
• [PATCH 17/25] tegra: cbootimage: remove noisy output   Lucas Stach
• [PATCH 18/25] Makefile.lib: add rule to built Tegra BCTs   Lucas Stach
• [PATCH 19/25] images: add Tegra20 image build rules   Lucas Stach
• [PATCH 20/25] images: add Tegra30 image build rules   Lucas Stach
• [PATCH 21/25] ARM: boards: colibri t20: import BCT cfgs   Lucas Stach
• [PATCH 22/25] images: tegra: build all Toradex Colibri images   Lucas Stach
• [PATCH 23/25] ARM: boards: beaver: import BCT cfg   Lucas Stach
• [PATCH 24/25] images: tegra: build NVidia Beaver image   Lucas Stach
• [PATCH 25/25] images: tegra: rename ac100 image   Lucas Stach
• [PATCH] openrisc: move ethoc registration to device_initcall   Franck Jullien
• [PATCH 2/5] spi: i.MX: Move to coredevice_initcall   Sascha Hauer
• [PATCH 10/25] i2c: add Tegra driver   Sascha Hauer
• openrisc is broken   Franck Jullien
• [PATCH 1/4] PCM051: Update RAM timings   Wadim Egorov
• [PATCH 2/4] barebox: common: added new filetypes   Wadim Egorov
• [PATCH 3/4] ARM: omap: barebox update nand xloadslots handler   Wadim Egorov
• [PATCH 4/4] phycore-am335x: Added bbu nand xloadslots handler   Wadim Egorov
• New driver crashes with "unable to handle paging request"   Rolf Evers-Fischer
• [PATCH 4/4] phycore-am335x: Added bbu nand xloadslots handler   Holger Schurig
• [PATCH] [RFC] omap: xload - try to get partition from dts   Christoph Fritz
• [PATCH] [RFC] omap: xload - try to get partition from dts   Christoph Fritz
• [PATCH] common: fix macro WARN   Christoph Fritz
• [PATCH] Add readmem command to read values out of memory.   Owen Kirby
• [PATCH 10/25] i2c: add Tegra driver   Lucas Stach
• [PATCH 1/2] boot: fix multiple boot sources   Sascha Hauer
• [PATCH 2/2] boot: iterate over directories in alphabetical order   Sascha Hauer
• boot command is broken?   Sascha Hauer
• [PATCH] mtd: partitions: only add write functions when mtd write support is enabled   Sascha Hauer
• [PATCH] drop CONFIG_PARTITION_NEED_MTD   Sascha Hauer
• [PATCH] [RFC] omap: xload - try to get partition from dts   Sascha Hauer
• [PATCH 00/19] commands rework patch series   Holger Schurig
• [PATCH 01/19] commands: group 'help' output   Holger Schurig
• [PATCH 02/19] commands: harmonize in-barebox documentation   Holger Schurig
• [PATCH 03/19] commands: harmonize in-barebox docs with Kconfig docs   Holger Schurig
• [PATCH 04/19] commands: CMD_MEMORY -> COMPILE_MEMORY   Holger Schurig
• [PATCH 05/19] commands: CMD_DIGEST -> COMPILE_DIGEST   Holger Schurig
• [PATCH 06/19] commands: move CMD_ARM_CPUINFO to commands/Kconfig   Holger Schurig
• [PATCH] common: fix macro WARN   Sascha Hauer
• [PATCH 07/19] commands: move CMD_ARM_MMUINFO to commands/Kconfig   Holger Schurig
• [PATCH 08/19] commands: move CMD_MIPS_CPUINFO to commands/Kconfig   Holger Schurig
• [PATCH 09/19] commands: move CMD_BOOT_ORDER to commands/Kconfig   Holger Schurig
• [PATCH 10/19] commands: move CMD_AT91_BOOT_TEST to commands/Kconfig   Holger Schurig
• [PATCH 11/19] commands: move CMD_AT91MUX to commands/Kconfig   Holger Schurig
• [PATCH 12/19] commands: move CMD_AT91MIX to commands/Kconfig   Holger Schurig
• [PATCH 13/19] commands: HUSH_GETOPT -> CMD_GETOPT   Holger Schurig
• [PATCH 14/19] commands: let all network commands depend on NET   Holger Schurig
• [PATCH 15/19] commands: introduce CMD_HOST   Holger Schurig
• [PATCH 16/19] commands: NET_PING -> CMD_PING   Holger Schurig
• [PATCH 17/19] commands: NET_DHCP -> CMD_DHCP   Holger Schurig
• [PATCH 18/19] commands: move CMD_IFUP to commands/Kconfig   Holger Schurig
• [PATCH 19/19] commands: move CONFIG_LONGHELP to commands/Kconfig   Holger Schurig
• [PATCH 00/19] commands rework patch series   Holger Schurig
• [PATCH 3/4] ARM: omap: barebox update nand xloadslots handler   Sascha Hauer
• [PATCH 00/19] commands rework patch series   Sascha Hauer
• Question about SPI NOR flash   Holger Schurig
• [PATCH 00/19] commands rework patch series   Holger Schurig
• SPI question   Holger Schurig
• [PATCH 3/4] ARM: omap: barebox update nand xloadslots handler   Alexander Aring
• Question about SPI NOR flash   Sascha Hauer
• Question about SPI NOR flash   Holger Schurig
• Question about SPI NOR flash   Sascha Hauer
• New driver crashes with "unable to handle paging request"   Alexander Aring
• [PATCH 08/19] commands: move CMD_MIPS_CPUINFO to commands/Kconfig   Antony Pavlov
• [PATCH 08/19] commands: move CMD_MIPS_CPUINFO to commands/Kconfig   Holger Schurig
• Question about SPI NOR flash   Holger Schurig
• [PATCH 08/19] commands: move CMD_MIPS_CPUINFO to commands/Kconfig   Antony Pavlov
• [PATCH 08/19] commands: move CMD_MIPS_CPUINFO to commands/Kconfig   Holger Schurig
• New driver crashes with "unable to handle paging request"   Christoph Fritz
• [PATCH 08/19] commands: move CMD_MIPS_CPUINFO to commands/Kconfig   Juergen Borleis
• barebox Documentation   Sascha Hauer
• [PATCH 00/19] commands rework patch series   Sascha Hauer
• [PATCH 01/19] commands: group 'help' output   Sascha Hauer
• barebox Documentation   Robert P. J. Day
• barebox Documentation   Jean-Christophe PLAGNIOL-VILLARD
• barebox Documentation   Holger Schurig
• [PATCH 01/19] commands: group 'help' output   Holger Schurig
• [PATCH 01/19 v2] commands: group 'help' output   Holger Schurig
• barebox Documentation   Sascha Hauer
• barebox Documentation   Holger Schurig
• barebox Documentation   Antony Pavlov
• barebox Documentation   Baruch Siach
• [PATCH 1/3] asm-generic: add IO memory accessors   Franck Jullien
• [PATCH 2/3] driver/net: fix bus endianess access in ethoc.c   Franck Jullien
• [PATCH 3/3] drivers/net/ethoc: add mdio bus support   Franck Jullien
• [PATCH] ARM: radxa-rock: set hostname after devicetree initialization   Beniamino Galvani
• Changing the baudrate via barebox prompt   Fabio Estevam
• Changing the baudrate via barebox prompt   Kevin Du Huanpeng
• Changing the baudrate via barebox prompt   Antony Pavlov
• Changing the baudrate via barebox prompt   Holger Schurig
• [PATCH 00/19] commands rework patch series   Sascha Hauer
• [PATCH 1/3] asm-generic: add IO memory accessors   Sascha Hauer
• [PATCH 3/3] drivers/net/ethoc: add mdio bus support   Sascha Hauer
• [PATCH] ARM: radxa-rock: set hostname after devicetree initialization   Sascha Hauer
• Changing the baudrate via barebox prompt   Sascha Hauer
• [PATCH 1/4] PCM051: Update RAM timings   Sascha Hauer
• Changing the baudrate via barebox prompt   Holger Schurig
• Changing the baudrate via barebox prompt   Holger Schurig
• Changing the baudrate via barebox prompt   Sascha Hauer
• Changing the baudrate via barebox prompt   Fabio Estevam
• [PATCH 00/19] commands rework patch series   Antony Pavlov
• [PATCH] drivers/net/ethoc: add mdio bus support   Franck Jullien
• Re: [PATCH 2/5] spi: i.MX: Move to coredevice_initcall   Alexander Shiyan
• [PATCH v2 01/25] reset: add reset controller framework   Lucas Stach
• [PATCH v2 02/25] tegra: lowlevel: add function to fetch chipid   Lucas Stach
• [PATCH v2 03/25] reset: add tegra reset controller   Lucas Stach
• [PATCH v2 04/25] clk: tegra: reset UARTS from clock controller   Lucas Stach
• [PATCH v2 05/25] mci: tegra: add reset control   Lucas Stach
• [PATCH v2 06/25] clk: tegra: remove device reset hack   Lucas Stach
• [PATCH v2 07/25] clk: tegra: allow to register clocks with 16 bit divider   Lucas Stach
• [PATCH v2 08/25] clk: tegra30: register i2c clocks   Lucas Stach
• [PATCH v2 09/25] clk: tegra20: register i2c clocks   Lucas Stach
• [PATCH v2 10/25] i2c: add Tegra driver   Lucas Stach
• [PATCH v2 11/25] ARM: tegra: beaver: activate sdmmc1 voltage rail   Lucas Stach
• [PATCH v2 12/25] ARM: tegra: beaver: adjust pinmux to make sdmmc1 work   Lucas Stach
• [PATCH v2 13/25] mci: tegra: apply pad autocalibration on T30   Lucas Stach
• [PATCH v2 14/25] mci: tegra: don't set 8bit mode unconditionally   Lucas Stach
• [PATCH v2 15/25] pinctrl: tegra30: parse drive groups   Lucas Stach
• [PATCH v2 16/25] scripts: tegra: import cbootimage   Lucas Stach
• [PATCH v2 17/25] tegra: cbootimage: remove noisy output   Lucas Stach
• [PATCH v2 18/25] Makefile.lib: add rule to built Tegra BCTs   Lucas Stach
• [PATCH v2 19/25] images: add Tegra20 image build rules   Lucas Stach
• [PATCH v2 20/25] images: add Tegra30 image build rules   Lucas Stach
• [PATCH v2 21/25] ARM: boards: colibri t20: import BCT cfgs   Lucas Stach
• [PATCH v2 22/25] images: tegra: build all Toradex Colibri images   Lucas Stach
• [PATCH v2 23/25] ARM: boards: beaver: import BCT cfg   Lucas Stach
• [PATCH v2 24/25] images: tegra: build NVidia Beaver image   Lucas Stach
• [PATCH v2 25/25] images: tegra: rename ac100 image   Lucas Stach
• [PATCH] spi: omap: support swapping D0/D1   Sascha Hauer
• [PATCH] Multi network device improvements   Sascha Hauer
• [PATCH 1/4] net: ifup: Set current ethernet device when doing ifup   Sascha Hauer
• [PATCH 2/4] net: Pass eth_device to net_receive   Sascha Hauer
• [PATCH 3/4] net: Allow to use multiple network interfaces at once   Sascha Hauer
• [PATCH 4/4] net: phy: Print ethernet device in the link information   Sascha Hauer
• [PATCH 1/2] eeprom: at25: Add dt probe support   Sascha Hauer
• [PATCH 2/2] mtd: m25p80: update Micron IDs   Sascha Hauer
• [PATCH 1/4] net: cpsw: Pass correct slave   Sascha Hauer
• [PATCH 2/4] net: cpsw: print slave_num in dev_dbg   Sascha Hauer
• [PATCH 3/4] net: cpsw: Always write mac_control register   Sascha Hauer
• [PATCH 4/4] net: cpsw: Allow multiple slaves   Sascha Hauer
• [PATCH] net: take eth id from devicetree alias   Sascha Hauer
• [PATCH] arm: omap: am33xx_generic: detect more boot sources   Sascha Hauer
• [PATCH 00/19] commands rework patch series   Holger Schurig
• [PATCH 2/2] mtd: m25p80: update Micron IDs   Holger Schurig
• [PATCH 1/2] ARM: am33xx: Pass uart_base to soft_reset function   Sascha Hauer
• [PATCH 2/2] ARM: am33xx: Add missing include   Sascha Hauer
• [PATCH] commands: rename "gpiolib" -> "gpioinfo"   Holger Schurig
• [PATCH] magicvars: can now also list values   Holger Schurig
• [PATCH] magicvars: can now also list values   Holger Schurig
• [PATCH] commands: rename "gpiolib" -> "gpioinfo"   Sebastian Hesselbarth
• [PATCH v2 3/4] ARM: omap: barebox update nand xloadslots handler   Wadim Egorov
• [PATCH v2 4/4] phycore-am335x: Added bbu nand xloadslots handler   Wadim Egorov
• [PATCH] ARM: AM3xxx: Add support for building AM33xx spi images   Sascha Hauer
• [PATCH v2 4/4] phycore-am335x: Added bbu nand xloadslots handler   Alexander Aring
• [PATCH] commands: rename "gpiolib" -> "gpioinfo"   Holger Schurig
• [PATCH v2 4/4] phycore-am335x: Added bbu nand xloadslots handler   Alexander Aring
• [PATCH] ARM: AM33xx: make bbu handler static inline   Sascha Hauer
• [PATCH 1/2] ARM: AM33xx: swap MLO SPI image automatically   Sascha Hauer
• [PATCH 2/2] ARM: AM33xx: Add SPI bbu handler   Sascha Hauer
• [PATCH 2/2] mtd: m25p80: update Micron IDs   Sascha Hauer
• [PATCH] ahs2: initial support   Holger Schurig
• New driver crashes with "unable to handle paging request"   Rolf Evers-Fischer
• [PATCH 00/19] commands rework patch series   Sascha Hauer
• [PATCH 1/3] ARM: AM335x: phycore: change to defaultenv_append_directory   Sascha Hauer
• [PATCH 2/3] ARM: AM335x: beaglebone: change to defaultenv_append_directory   Sascha Hauer
• [PATCH 3/3] ARM: AM335x: merge am335x config in a single config file   Sascha Hauer
• [PATCH] barebox: select host-lzop   Markus Niebel
• barebox Documentation   Sascha Hauer
• [PATCH] commands: rename "gpiolib" -> "gpioinfo"   Sascha Hauer
• [PATCH v2] ahs2: initial support   Holger Schurig
• [PATCH] barebox: select host-lzop   Sascha Hauer
• [PATCH] commands: rename "gpiolib" -> "gpioinfo"   Sebastian Hesselbarth
• [PATCH v2 3/4] ARM: omap: barebox update nand xloadslots handler   Sascha Hauer
• [PATCH v2 4/4] phycore-am335x: Added bbu nand xloadslots handler   Sascha Hauer
• [PATCH] commands: rename "gpiolib" -> "gpioinfo"   Sascha Hauer
• [PATCH] syscon: fix prototype compile error   Lucas Stach
• [PATCH] serial: imx: Fix buggy transmissions when baudrate mismatches   Fabio Estevam
• [PATCH] serial: imx: Fix buggy transmissions when baudrate mismatches   Sascha Hauer
• [PATCH] serial: imx: Fix buggy transmissions when baudrate mismatches   Fabio Estevam
• [PATCH] drivers/net/ethoc: add mdio bus support   Sascha Hauer
• [PATCH] syscon: fix prototype compile error   Sascha Hauer
• [PATCH v2] ahs2: initial support   Sascha Hauer
• [PATCH v2] ahs2: initial support   Holger Schurig
• [PATCH v3 3/4] ARM: omap: barebox update nand xloadslots handler   Wadim Egorov
• [PATCH v3 4/4] phycore-am335x: Added bbu nand xloadslots handler   Wadim Egorov
• [PATCH] free up some sram space for dmo edmqmx6 board   Silvio Fricke
• [PATCH] ARM: i.MX: edmqmx6: disable menu framework   Silvio Fricke
• [PATCH v2] ahs2: initial support   Sascha Hauer
• [PATCH 01/11] ARM: i.MX: iim: Check result of dev_request_mem_region   Sascha Hauer
• [PATCH 02/11] ARM: i.MX: iim: introduce private data struct   Sascha Hauer
• [PATCH 03/11] ARM: i.MX: iim: Add namespace to functions   Sascha Hauer
• [PATCH 04/11] ARM: i.MX: iim: register iim device   Sascha Hauer
• [PATCH 05/11] ARM: i.MX: iim: pass private data struct to imx_iim_fuse_blow   Sascha Hauer
• [PATCH 06/11] ARM: i.MX: iim: pass private data struct to imx_iim_fuse_sense   Sascha Hauer
• [PATCH 07/11] ARM: i.MX: iim: use dev_* for messages   Sascha Hauer
• [PATCH 08/11] ARM: i.MX: iim: move static variables into driver struct   Sascha Hauer
• [PATCH 09/11] ARM: i.MX: iim: don't make detour over cdev API   Sascha Hauer
• [PATCH 10/11] ARM: i.MX: iim: make fuse blowing work on i.MX5   Sascha Hauer
• [PATCH 11/11] ARM: i.MX: iim: provide a MAC address convenience variable   Sascha Hauer
• [PATCH] ARM: i.MX: iim: Add regulator support   Sascha Hauer
• [PATCH] hush: setting variables may fail   Sascha Hauer
• [PATCH 0/4] some mini2440 updates   Michael Olbrich
• [PATCH 1/4] ARM: mini2440: switch to env2   Michael Olbrich
• [PATCH 2/4] ARM: mini2440: update defconfig   Michael Olbrich
• [PATCH 3/4] ARM Samsung: fix booting from NAND with pbl   Michael Olbrich
• [PATCH 4/4] net: dm9k: only read on packet for each call to dm9k_eth_rx()   Michael Olbrich
• mini2440 and CONFIG_MMU_EARLY   Michael Olbrich
• [PATCH 1/5] mfd: mc13xxx: Allow to set callback for mc13xxx   Marc Reilly
• [PATCH 1/5] mfd: mc13xxx: Allow to set callback for mc13xxx   Sascha Hauer
• [PATCH v3 3/4] ARM: omap: barebox update nand xloadslots handler   Sascha Hauer
• [PATCH] ARM: i.MX: edmqmx6: disable menu framework   Sascha Hauer
• [PATCH 0/4] some mini2440 updates   Sascha Hauer
• [PATCH 2/5] spi: i.MX: Move to coredevice_initcall   Sascha Hauer
• [PATCH] mtd: nand: mxs: Fix 2k nand with oob size of 224 bytes   Sascha Hauer
• [PATCH 1/2] net: arc_emac: remove delay from mdio polling loop   Beniamino Galvani
• [PATCH 2/2] net: arc_emac: disable interrupts   Beniamino Galvani
• [PATCH] devicetree command changes   Sascha Hauer
• [PATCH 1/6] complete: Fix completion after options   Sascha Hauer
• [PATCH 2/6] complete: Add devicetree completion   Sascha Hauer
• [PATCH 3/6] commands: add of_dump command   Sascha Hauer
• [PATCH 4/6] oftree: remove dump support   Sascha Hauer
• [PATCH 5/6] of: Drop devicetree merge support   Sascha Hauer
• [PATCH 6/6] oftree command: make devicetree file optargs to -l/-s   Sascha Hauer
• [PATCH 2/2] net: arc_emac: disable interrupts   Sascha Hauer
• [PATCH 4/6] oftree: remove dump support   Alexander Aring
• [PATCH 4/6] oftree: remove dump support   Alexander Aring
• [PATCH 4/6] oftree: remove dump support   Sascha Hauer
• [PATCH] i2c: correct string format type   Alexander Aring
• [PATCH 5/6] of: Drop devicetree merge support   Sebastian Hesselbarth
• [PATCH] commands: add 'findstr' to get string from file   Christoph Fritz
• [PATCH] commands: add 'findstr' to get string from file   Alexander Aring
• [PATCH] commands: add 'findstr' to get string from file   Christoph Fritz
• [PATCH] commands: add 'findstr' to get string from file   Alexander Aring
• [PATCH 5/6] of: Drop devicetree merge support   Sascha Hauer
• [PATCH 5/6] of: Drop devicetree merge support   Esben Haabendal
• [PATCH v2] commands: add 'findstr' to search file for string   Christoph Fritz
• [PATCH] [RFC] [WIP] commands: add tree view capable lsusb   Antony Pavlov
• [PATCH v2] commands: add 'findstr' to search file for string   Antony Pavlov
• [PATCH v2] commands: add 'findstr' to search file for string   Christoph Fritz
• [PATCH] mii-tool fixes   Sascha Hauer
• [PATCH 1/3] mii-tool: Fix string length   Sascha Hauer
• [PATCH 2/3] mii-tool: Fix gigabit link test   Sascha Hauer
• [PATCH 3/3] mii-tool: Fix gigabit advertise / link partner ability mixup   Sascha Hauer
• [PATCH] devicetree support for ethernet phys   Sascha Hauer
• [PATCH 01/10] net: phy: factor out phy_device_attach function   Sascha Hauer
• [PATCH 02/10] net: phy: move setting of phy_map to phy_register_device   Sascha Hauer
• [PATCH 03/10] net: phy: register phys specified in devicetree   Sascha Hauer
• [PATCH 04/10] net: phy: Support finding a phy in the devicetree   Sascha Hauer
• [PATCH 05/10] net: phy: Support limiting phy speed in the devicetree   Sascha Hauer
• [PATCH 06/10] net: orion-gbe: use transparent-to-driver of mdio functions   Sascha Hauer
• [PATCH 07/10] net: phy: remove now unused of_phy_device_connect   Sascha Hauer
• [PATCH 08/10] net: phy: genphy: always write MII_CTRL1000 when available   Sascha Hauer
• [PATCH 09/10] net: phy: genphy: Make it work with of_set_phy_supported   Sascha Hauer
• [PATCH 10/10] net: fec_imx: Add devicetree support for mdio bus   Sascha Hauer
• [PATCH 1/2] net: fec_imx: mask mii register reads correctly   Sascha Hauer
• [PATCH 2/2] net: fec_imx: check return value of registration functions   Sascha Hauer
• [PATCH 05/10] net: phy: Support limiting phy speed in the devicetree   Sebastian Hesselbarth
• [PATCH 06/10] net: orion-gbe: use transparent-to-driver of mdio functions   Sebastian Hesselbarth
• [PATCH 5/6] of: Drop devicetree merge support   Sascha Hauer
• [PATCH 3/6] commands: add of_dump command   Holger Schurig
• [PATCH] [RFC] [WIP] commands: add tree view capable lsusb   Holger Schurig
• [PATCH 5/6] of: Drop devicetree merge support   Holger Schurig
• [PATCH] commands: add 'findstr' to get string from file   Sascha Hauer
• [PATCH] [RFC] [WIP] commands: add tree view capable lsusb   Antony Pavlov
• [PATCH] devinfo: add human readable size after memory range   Franck Jullien
• [PATCH 1/3] openrisc: update SPR registers definition   Franck Jullien
• [PATCH 2/3] openrisc: fix relocation code   Franck Jullien
• [PATCH 3/3] openrisc: update cpuinfo   Franck Jullien
• Приветствую, по поводу lists.infradead.org   Иван
• [PATCH 1/2] usb: remove unimplemented usb_get_dev_index() declaration   Antony Pavlov
• [PATCH 2/2] usb: drop unused USB_UHCI_*_ID macros   Antony Pavlov
• [PATCH] vsprintf: fix formatting   Antony Pavlov
• [PATCH] devinfo: add human readable size after memory range   Sascha Hauer
• [PATCH 1/3] openrisc: update SPR registers definition   Sascha Hauer
• [PATCH 3/6] commands: add of_dump command   Sascha Hauer
• [PATCH 1/2] usb: remove unimplemented usb_get_dev_index() declaration   Sascha Hauer
• [PATCH] vsprintf: fix formatting   Sascha Hauer
• [PATCH] usb: chipidea i.MX: relax phy_type requirements   Sascha Hauer
• [PATCH] ARM: dts: i.MX53: include loacal imx53.dtsi file   Sascha Hauer
• [PATCH] commands: add 'findstr' to get string from file   Christoph Fritz
• Question about SPI NOR flash   Holger Schurig
• [PATCH v2 0/7] ARM: initial support for RC Module UEMD SoCs and MB 77.07 board   Antony Pavlov
• [PATCH v2 1/7] ARM: initial support for RC Module UEMD SoCs   Antony Pavlov
• [PATCH v2 2/7] ARM: uemd: add DEBUG_LL support   Antony Pavlov
• [PATCH v2 3/7] clocksource: add uemd clocksource   Antony Pavlov
• [PATCH v2 4/7] ARM: dts: add minimal К1879ХБ1Я devicetree file   Antony Pavlov
• [PATCH v2 5/7] ARM: uemd: add mb7707 board support   Antony Pavlov
• [PATCH v2 6/7] ARM: uemd: add module-mb7707_defconfig   Antony Pavlov
• [PATCH v2 7/7] ARM: mb7707: add barebox mini-howto   Antony Pavlov
• [PATCH 06/10] net: orion-gbe: use transparent-to-driver of mdio functions   Sebastian Hesselbarth
• [RFC] [WIP] incorporate picotcp into barebox: a small demo   Antony Pavlov
• [PATCH] MIPS: dlink-dir-320: switch to dt   Antony Pavlov
• [RFC] [WIP] incorporate picotcp into barebox: a small demo   Daniele Lacamera
• [RFC] [WIP] incorporate picotcp into barebox: a small demo   Lucas Stach
• [RFC] [WIP] incorporate picotcp into barebox: a small demo   Antony Pavlov
• [PATCH] cfi_flash: show progress while during erase   Franck Jullien
• [PATCH] cfi_flash: show progress while during erase   Franck Jullien
• [PATCH] cfi_flash: show progress while during erase   Holger Schurig
• [PATCH] cfi_flash: show progress while during erase   Franck Jullien
• [PATCH v2 0/7] ARM: initial support for RC Module UEMD SoCs and MB 77.07 board   Sascha Hauer
• [PATCH] MIPS: dlink-dir-320: switch to dt   Sascha Hauer
• [RFC] [WIP] incorporate picotcp into barebox: a small demo   Sascha Hauer
• [PATCH] cfi_flash: show progress while during erase   Sascha Hauer
• [PATCH] cfi_flash: show progress while during erase   Franck Jullien
• [RFC] [WIP] incorporate picotcp into barebox: a small demo   Daniele Lacamera
• [RFC] [WIP] incorporate picotcp into barebox: a small demo   Daniele Lacamera
• [RFC] [WIP] incorporate picotcp into barebox: a small demo   Antony Pavlov
• [RFC] [WIP] incorporate picotcp into barebox: a small demo   Daniele Lacamera
• [PATCH] cfi_flash: show progress while during erase   Sascha Hauer
• [RFC] [WIP] incorporate picotcp into barebox: a small demo   Sascha Hauer
• [RFC] [WIP] incorporate picotcp into barebox: a small demo   Juergen Borleis
• [RFC] [WIP] incorporate picotcp into barebox: a small demo   Antony Pavlov
• [PATCH] SAMA5D3X FIX AT91_SMC_CS offset stride   Matteo Fortini
• [PATCH] serial: imx: Fix buggy transmissions when baudrate mismatches   Fabio Estevam
• [PATCH] SAMA5D3X FIX AT91_SMC_CS offset stride   Bo Shen
• [PATCH] ARM: atmel: sama5d3xek: remove duplicate included file   Bo Shen
• [RFC] [WIP] incorporate picotcp into barebox: a small demo   Antony Pavlov
• [PATCH][RESEND] sama5d3x: fix AT91_SMC_CS offset stride   Matteo Fortini
• [PATCH] sama5d3x: fix AT91_SMC_CS offset stride   Matteo Fortini
• [PATCH] MIPS: dlink-dir-320_defconfig: drop duplicated symbols   Antony Pavlov
• [PATCH] sama5d3x: fix AT91_SMC_CS offset stride   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2] sama5d3x: fix AT91_SMC_CS offset stride   Matteo Fortini
• [PATCH] sama5d3x: fix AT91_SMC_CS offset stride   Bo Shen
• [PATCH v2 2/7] ARM: uemd: add DEBUG_LL support   Holger Schurig
• [PATCH v2 2/7] ARM: uemd: add DEBUG_LL support   Holger Schurig
• [PATCH v2 2/7] ARM: uemd: add DEBUG_LL support   Antony Pavlov
• [PATCH 00/10] miscelleanous beautification patches   Holger Schurig
• [PATCH 08/10] bootm: beautify output   Holger Schurig
• [PATCH 03/10] devinfo: make the output of "devinfo DEVICE" nicer   Holger Schurig
• [PATCH 00/10] miscelleanous beautification patches   Holger Schurig
• [PATCH 01/10] drvlist: factor the driver list out of 'devinfo'   Holger Schurig
• [PATCH 02/10] devinfo: reduce indentation   Holger Schurig
• [PATCH 03/10] devinfo: make the output of "devinfo DEVICE" nicer   Holger Schurig
• [PATCH 04/10] parameters: only show possible enumerations if there are any   Holger Schurig
• [PATCH 05/10] net: show enetaddr in lowercase   Holger Schurig
• [PATCH 06/10] meminfo: purely cosmetical changes   Holger Schurig
• [PATCH 07/10] misc: upper-case some abbreviations   Holger Schurig
• [PATCH 08/10] bootm: beautify output   Holger Schurig
• [PATCH 09/10] beautify PHY driver names   Holger Schurig
• [PATCH 10/10] device drivers: harmonize underscore in driver names   Holger Schurig
• [PATCH 02/10] devinfo: reduce indentation   Holger Schurig
• [PATCH 01/10] drvlist: factor the driver list out of 'devinfo'   Holger Schurig
• [PATCH 04/10] parameters: only show possible enumerations if there are any   Holger Schurig
• [RFC] net: picoping: try to make it asynchronious: fail   Antony Pavlov
• [PATCH 09/10] beautify PHY driver names   Alexander Aring
• [RFC] picotcp.20140530   Antony Pavlov
• [PATCH 09/10] beautify PHY driver names   Holger Schurig
• [RFC] net: picoping: try to make it asynchronious: fail   Holger Schurig
• [PATCH 06/10] meminfo: purely cosmetical changes   Holger Schurig
• [PATCH 06/10] meminfo: purely cosmetical changes   Antony Pavlov
• [PATCH 02/10] devinfo: reduce indentation   Antony Pavlov
• [PATCH 09/10] beautify PHY driver names   Alexander Aring
• [PATCH] oftree, of_dump: fix help texts   Holger Schurig

Last message date: Fri May 30 03:03:53 PDT 2014
Archived on: Fri May 30 03:04:16 PDT 2014

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...