June 2026 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Jun 1 00:45:59 PDT 2026
Ending: Tue Jun 9 03:02:30 PDT 2026
Messages: 100

• [RFC PATCH 1/3] mtd: spi-nor: spansion: s25fl256s0: remove SKIP_SFDP flag   Tudor Ambarus
• [RFC PATCH 2/3] mtd: spi-nor: don't clear the SNOR_F_4B_OPCODES flag on failure   Tudor Ambarus
• [RFC PATCH 3/3] mtd: spi-nor: rework flash parameter initialization   Tudor Ambarus
• No subject   Boyapally, Srikanth
• [PATCH 1/1] ubifs: fix slab-out-of-bounds in pack_inode via xattr   Zhihao Cheng
• [PATCH v1] mtd: ubi: Fix rollback for explicit UBI device numbers   Zhihao Cheng
• [PATCH v1] mtd: ubi: Fix rollback for explicit UBI device numbers   Yuho Choi
• [PATCH v3 01/13] spi: dt-bindings: allow spi-max-frequency to specify a frequency pair   Conor Dooley
• [PATCH v3 01/13] spi: dt-bindings: allow spi-max-frequency to specify a frequency pair   Conor Dooley
• [PATCH v3 01/13] spi: dt-bindings: allow spi-max-frequency to specify a frequency pair   Conor Dooley
• [PATCH v3 01/13] spi: dt-bindings: allow spi-max-frequency to specify a frequency pair   Conor Dooley
• [PATCH v3 01/13] spi: dt-bindings: allow spi-max-frequency to specify a frequency pair   Conor Dooley
• [PATCH v3 01/13] spi: dt-bindings: allow spi-max-frequency to specify a frequency pair   Conor Dooley
• [PATCH 1/4] dt-bindings: mtd: qcom,nandc: Add MDM9607 QPIC NAND controller   Konrad Dybcio
• [PATCH 1/4] dt-bindings: mtd: qcom,nandc: Add MDM9607 QPIC NAND controller   Konrad Dybcio
• [PATCH 0/4] mtd: rawnand: qcom: Add MDM9607   Stephan Gerhold
• [PATCH 1/4] dt-bindings: mtd: qcom,nandc: Add MDM9607 QPIC NAND controller   Stephan Gerhold
• [PATCH 2/4] mtd: rawnand: qcom: Make "aon" clock optional   Stephan Gerhold
• [PATCH 3/4] mtd: rawnand: qcom: Make has_onfi_read_op separate from qpic_version2   Stephan Gerhold
• [PATCH 4/4] mtd: rawnand: qcom: Add MDM9607 compatible   Stephan Gerhold
• [PATCH 1/4] dt-bindings: mtd: qcom,nandc: Add MDM9607 QPIC NAND controller   Stephan Gerhold
• [PATCH 1/4] dt-bindings: mtd: qcom,nandc: Add MDM9607 QPIC NAND controller   Stephan Gerhold
• [PATCH 1/4] dt-bindings: mtd: qcom,nandc: Add MDM9607 QPIC NAND controller   Stephan Gerhold
• [PATCH v3 02/13] spi: dt-bindings: cdns,qspi-nor: add PHY tuning pattern partition property   Rob Herring
• [PATCH v3 02/13] spi: dt-bindings: cdns,qspi-nor: add PHY tuning pattern partition property   Rob Herring
• [PATCH v3 01/13] spi: dt-bindings: allow spi-max-frequency to specify a frequency pair   Santhosh Kumar K
• [PATCH v3 00/13] spi: cadence-quadspi: add PHY tuning support   Santhosh Kumar K
• [PATCH v3 02/13] spi: dt-bindings: cdns,qspi-nor: add PHY tuning pattern partition property   Santhosh Kumar K
• [PATCH v3 10/13] spi: cadence-quadspi: enable PHY for direct reads and indirect writes   Santhosh Kumar K
• [PATCH v3 08/13] spi: cadence-quadspi: add PHY tuning support   Santhosh Kumar K
• [PATCH v3 11/13] mtd: spinand: run PHY tuning after init and update dirmap frequencies   Santhosh Kumar K
• [PATCH v3 09/13] spi: cadence-quadspi: reject 2-byte-address DDR ops on PHY-tunable hardware   Santhosh Kumar K
• [PATCH v3 02/13] spi: dt-bindings: cdns,qspi-nor: add PHY tuning pattern partition property   Santhosh Kumar K
• [PATCH v3 02/13] spi: dt-bindings: cdns,qspi-nor: add PHY tuning pattern partition property   Santhosh Kumar K
• [PATCH v3 02/13] spi: dt-bindings: cdns,qspi-nor: add PHY tuning pattern partition property   Santhosh Kumar K
• [PATCH v3 02/13] spi: dt-bindings: cdns,qspi-nor: add PHY tuning pattern partition property   Santhosh Kumar K
• [PATCH v3 04/13] spi: spi-mem: add spi_mem_apply_base_freq_cap()   Santhosh Kumar K
• [PATCH v3 02/13] spi: dt-bindings: cdns,qspi-nor: add PHY tuning pattern partition property   Krzysztof Kozlowski
• [PATCH v3 02/13] spi: dt-bindings: cdns,qspi-nor: add PHY tuning pattern partition property   Krzysztof Kozlowski
• [PATCH v3 02/13] spi: dt-bindings: cdns,qspi-nor: add PHY tuning pattern partition property   Krzysztof Kozlowski
• [PATCH v3 02/13] spi: dt-bindings: cdns,qspi-nor: add PHY tuning pattern partition property   Krzysztof Kozlowski
• [PATCH 1/4] dt-bindings: mtd: qcom,nandc: Add MDM9607 QPIC NAND controller   Krzysztof Kozlowski
• [PATCH 2/4] mtd: rawnand: qcom: Make "aon" clock optional   Krzysztof Kozlowski
• [PATCH] mtd: spi-nor: Add support for MX25L12833F and MX25L12845G   Cheng Ming Lin
• [PATCH v2 0/2] mtd: spi-nor: macronix: Add support for MX25L12833F and MX25L12845G   Cheng Ming Lin
• [PATCH v2 1/2] mtd: spi-nor: Add support for MX25L12833F and MX25L12845G   Cheng Ming Lin
• [PATCH v2 2/2] mtd: spi-nor: macronix: Restore fallback parameters for MX25L12805D   Cheng Ming Lin
• [PATCH v3 0/2] mtd: spi-nor: macronix: Add support for MX25L12833F and MX25L12845G   Cheng Ming Lin
• [PATCH v3 1/2] mtd: spi-nor: Add support for MX25L12833F and MX25L12845G   Cheng Ming Lin
• [PATCH v3 2/2] mtd: spi-nor: macronix: Restore fallback parameters for MX25L12805D   Cheng Ming Lin
• [PATCH] mtd: rawnand: ndfc: use ioread32be/iowrite32be and allow COMPILE_TEST   Rosen Penev
• [RFC PATCH 1/3] mtd: spi-nor: spansion: s25fl256s0: remove SKIP_SFDP flag   Miquel Raynal
• [RFC PATCH 2/3] mtd: spi-nor: don't clear the SNOR_F_4B_OPCODES flag on failure   Miquel Raynal
• [RFC PATCH 0/3] mtd: spi-nor: Rework flash parameter initialization   Miquel Raynal
• [PATCH v3 01/13] spi: dt-bindings: allow spi-max-frequency to specify a frequency pair   Miquel Raynal
• [PATCH v3 10/13] spi: cadence-quadspi: enable PHY for direct reads and indirect writes   Miquel Raynal
• [PATCH v3 11/13] mtd: spinand: run PHY tuning after init and update dirmap frequencies   Miquel Raynal
• [PATCH v3 09/13] spi: cadence-quadspi: reject 2-byte-address DDR ops on PHY-tunable hardware   Miquel Raynal
• [PATCH v3 02/13] spi: dt-bindings: cdns,qspi-nor: add PHY tuning pattern partition property   Miquel Raynal
• [spi-nor] Macronix MX25L requires CR read opcode 0x15 (not 0x35)   Miquel Raynal
• [PATCH v3 01/13] spi: dt-bindings: allow spi-max-frequency to specify a frequency pair   Miquel Raynal
• [PATCH v3 02/13] spi: dt-bindings: cdns,qspi-nor: add PHY tuning pattern partition property   Miquel Raynal
• [PATCH v3 01/13] spi: dt-bindings: allow spi-max-frequency to specify a frequency pair   Miquel Raynal
• [PATCH v3 01/13] spi: dt-bindings: allow spi-max-frequency to specify a frequency pair   Miquel Raynal
• [PATCH v3 02/13] spi: dt-bindings: cdns,qspi-nor: add PHY tuning pattern partition property   Miquel Raynal
• [PATCH v2 1/2] mtd: spi-nor: Add support for MX25L12833F and MX25L12845G   Miquel Raynal
• [PATCH v2 2/2] mtd: spi-nor: macronix: Restore fallback parameters for MX25L12805D   Miquel Raynal
• [PATCH v3 04/13] spi: spi-mem: add spi_mem_apply_base_freq_cap()   Miquel Raynal
• [PATCH v3 01/13] spi: dt-bindings: allow spi-max-frequency to specify a frequency pair   Miquel Raynal
• [PATCH v3 01/13] spi: dt-bindings: allow spi-max-frequency to specify a frequency pair   Miquel Raynal
• [PATCH v3 01/13] spi: dt-bindings: allow spi-max-frequency to specify a frequency pair   Miquel Raynal
• [PATCH 1/4] dt-bindings: mtd: qcom,nandc: Add MDM9607 QPIC NAND controller   Miquel Raynal
• [PATCH] mtd: slram: avoid dangling device list entries   Miquel Raynal
• [PATCH 1/4] dt-bindings: mtd: qcom,nandc: Add MDM9607 QPIC NAND controller   Miquel Raynal
• [PATCH 0/3] mtd: rawnand: pl353: Fixes and software ECC support   Michal Simek
• [PATCH 1/3] mtd: rawnand: pl353: Update timings at the right moment   Olivier Sobrie
• [RFC PATCH 0/3] mtd: spi-nor: Rework flash parameter initialization   Michael Walle
• [RFC PATCH 1/3] mtd: spi-nor: spansion: s25fl256s0: remove SKIP_SFDP flag   Michael Walle
• [RFC PATCH 2/3] mtd: spi-nor: don't clear the SNOR_F_4B_OPCODES flag on failure   Michael Walle
• [RFC PATCH 3/3] mtd: spi-nor: rework flash parameter initialization   Michael Walle
• [PATCH] mtd: spi-nor: Add support for MX25L12833F and MX25L12845G   Michael Walle
• [RFC PATCH 1/3] mtd: spi-nor: spansion: s25fl256s0: remove SKIP_SFDP flag   Michael Walle
• [PATCH v3 02/13] spi: dt-bindings: cdns,qspi-nor: add PHY tuning pattern partition property   Michael Walle
• [PATCH] mtd: slram: avoid dangling device list entries   Ruoyu Wang
• [PATCH v2 0/2] mtd: slram: fix failed registration cleanup   Ruoyu Wang
• [PATCH v2 1/2] mtd: slram: remove failed entries from the device list   Ruoyu Wang
• [PATCH v2 2/2] mtd: slram: simplify register_device() cleanup   Ruoyu Wang
• [PATCH 1/1] ubifs: fix slab-out-of-bounds in pack_inode via xattr   Ren Wei
• [PATCH 1/1] ubifs: fix slab-out-of-bounds in pack_inode via xattr   Richard Weinberger
• Benötigen Sie einen Kredit?   sebastian at ersa.pl
• [PATCH next] drivers/mtd/devices/block2mtd: Replace strnlen() strcpy() pair with strscpy()   david.laight.linux at gmail.com
• [PATCH next] drivers/mtd/devices/phram: Replace strnlen() strcpy() pair with strscpy()   david.laight.linux at gmail.com
• [PATCH next] drivers/mtd/ubi/build: Use strscpy() to copy strings into arrays   david.laight.linux at gmail.com
• [PATCH next] drivers/mtd/parsers: Replace strcpy() into kmalloc()ed buffer   david.laight.linux at gmail.com
• [PATCH next] drivers/mtd/ubi/block: Replace strcpy() with strscpy()   david.laight.linux at gmail.com
• [RFC PATCH 0/3] mtd: spi-nor: Rework flash parameter initialization   Takahiro.Kuwano at infineon.com
• [RFC PATCH 1/3] mtd: spi-nor: spansion: s25fl256s0: remove SKIP_SFDP flag   Takahiro.Kuwano at infineon.com
• [RFC PATCH 2/3] mtd: spi-nor: don't clear the SNOR_F_4B_OPCODES flag on failure   Takahiro.Kuwano at infineon.com
• [RFC PATCH 0/3] mtd: spi-nor: Rework flash parameter initialization   Takahiro.Kuwano at infineon.com
• [PATCH v2 2/2] mtd: spi-nor: macronix: Restore fallback parameters for MX25L12805D   kernel test robot

Last message date: Tue Jun 9 03:02:30 PDT 2026
Archived on: Tue Jun 9 03:02:43 PDT 2026

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...