[PATCH 0/4] mtd: rawnand: qcom: Add MDM9607

[Stephan Gerhold]

MDM9607 has QPIC v1.5 that supports the OP_PAGE_READ_ONFI_READ command, but
is missing the rest of the hardware changes in QPIC v2. There is also only
a single clock that can be controlled using the RPM firmware. Document and
add the new qcom,mdm9607-nand compatible for this setup.

Signed-off-by: Stephan Gerhold <stephan.gerhold at linaro.org>
---
Stephan Gerhold (4):
      dt-bindings: mtd: qcom,nandc: Add MDM9607 QPIC NAND controller
      mtd: rawnand: qcom: Make "aon" clock optional
      mtd: rawnand: qcom: Make has_onfi_read_op separate from qpic_version2
      mtd: rawnand: qcom: Add MDM9607 compatible

 .../devicetree/bindings/mtd/qcom,nandc.yaml        | 24 +++++++++++++++++
 drivers/mtd/nand/raw/qcom_nandc.c                  | 30 ++++++++++++++++------
 include/linux/mtd/nand-qpic-common.h               |  2 ++
 3 files changed, 48 insertions(+), 8 deletions(-)
---
base-commit: 19ed11aee966d91beebdef9d32ce926474872f79
change-id: 20260608-qcom-nandc-mdm9607-f2196eeb6bc0

Best regards,
--  
Stephan Gerhold <stephan.gerhold at linaro.org>