[PATCH 4/4] mtd: rawnand: qcom: Add MDM9607 compatible

[Stephan Gerhold]

MDM9607 has QPIC v1.5 that supports the OP_PAGE_READ_ONFI_READ command, but
is missing the rest of the hardware changes in QPIC v2. Add the new
qcom,mdm9607-nand compatible and set it to use has_onfi_read_op without
also setting qpic_version2.

Signed-off-by: Stephan Gerhold <stephan.gerhold at linaro.org>
---
 drivers/mtd/nand/raw/qcom_nandc.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 9217e8de5512..d7642db2e2df 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -2381,6 +2381,15 @@ static const struct qcom_nandc_props ipq8074_nandc_props = {
 	.bam_offset = 0x30000,
 };
 
+static const struct qcom_nandc_props mdm9607_nandc_props = {
+	.ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT),
+	.supports_bam = true,
+	.nandc_part_of_qpic = true,
+	.has_onfi_read_op = true,
+	.dev_cmd_reg_start = 0x7000,
+	.bam_offset = 0x30000,
+};
+
 static const struct qcom_nandc_props sdx55_nandc_props = {
 	.ecc_modes = (ECC_BCH_4BIT | ECC_BCH_8BIT),
 	.supports_bam = true,
@@ -2412,6 +2421,10 @@ static const struct of_device_id qcom_nandc_of_match[] = {
 		.compatible = "qcom,ipq8074-nand",
 		.data = &ipq8074_nandc_props,
 	},
+	{
+		.compatible = "qcom,mdm9607-nand",
+		.data = &mdm9607_nandc_props,
+	},
 	{
 		.compatible = "qcom,sdx55-nand",
 		.data = &sdx55_nandc_props,

-- 
2.54.0