June 2017 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Thu Jun 1 03:30:35 PDT 2017
Ending: Fri Jun 30 03:39:22 PDT 2017
Messages: 250

• [source] ramips: fixup nand support on v4.9   LEDE Commits
• [source] ramips: add jumbo frame support for v4.9   LEDE Commits
• [source] mvebu: fix sysupgrade   LEDE Commits
• [source] dnsmasq: bump to 2.77   LEDE Commits
• [source] dnsmasq: don't point --resolv-file to default location unconditionally   LEDE Commits
• [source] dnsmasq: use logical interface name for dhcp relay config   LEDE Commits
• [source] dnsmasq: make tftp root if not existing   LEDE Commits
• [source] dnsmasq: bump to 2.77   LEDE Commits
• [source] umdns: remove superfluous include in init script   LEDE Commits
• [source] umdns: remove superfluous include in init script   LEDE Commits
• [source] x86: disable X2APIC support for legacy subtargets   LEDE Commits
• [source] x86: disable X2APIC support for legacy subtargets   LEDE Commits
• [source] mvebu: Add block device sd to default kernel config   LEDE Commits
• [source] lantiq: xrx200: use vlan for ethernet wan port   LEDE Commits
• [source] lantiq: use the P2812HNUF* wan port as wan   LEDE Commits
• [source] lantiq: select kmod-mt7603 instead of kmod-mt76 for WBMR-300HPD   LEDE Commits
• [source] lantiq: fix broadcasts and vlans in two iface mode   LEDE Commits
• [source] lantiq: fix lantiq_dsl.sh status and lucistat output   LEDE Commits
• [source] lantiq: modified lantiq_dsl.sh status output of latency   LEDE Commits
• [source] Lantiq: make possible to tweak DSL SRN from UCI   LEDE Commits
• [source] ramips: enable PCIe on MT7688   LEDE Commits
• [source] kernel: properly package 8250 serial PCI module   LEDE Commits
• [source] base-files: always set proto passed to _ucidef_set_interface()   LEDE Commits
• [source] lantiq: fix amazonse.dsti   LEDE Commits
• [source] lantiq: add Amazon-SE subtarget   LEDE Commits
• [source] lantiq: enable Netgear DGN1000B image build   LEDE Commits
• [source] lantiq: fix ifxmips_atm_amazon_se.c   LEDE Commits
• [source] lantiq: add Allnet ALL0333CJ support   LEDE Commits
• [source] lantiq: fix lantiq_mei.c and amazonse.dsti for adsl modem firmware   LEDE Commits
• [source] lantiq: fix 0008-MIPS-lantiq-backport-old-timer-code.patch for Amazon-SE   LEDE Commits
• [source] build: fix kernel refresh failure on first run   LEDE Commits
• [source] brcm63xx: refresh kernel config   LEDE Commits
• [source] brcm63xx: update flash of_node patches to full patch set   LEDE Commits
• [source] brcm63xx: backport upstream solution for SPI message size limits   LEDE Commits
• [source] brcm63xx: register SPI controllers through DT   LEDE Commits
• [source] brcm63xx: do not require fixed partitions when probing from DT   LEDE Commits
• [source] brcm63xx: add pflash for remaining pflash equipped boards   LEDE Commits
• [source] brcm63xx: probe SPI flash through DT   LEDE Commits
• [source] brcm63xx: drop support for caldata in brcm63xxpart   LEDE Commits
• [source] brcm63xx: drop support for specifying SPI flash part parsers   LEDE Commits
• [source] mdadm: Do not check RUN_DIR   LEDE Commits
• [source] perf: Depend on KERNEL_PERF_EVENTS   LEDE Commits
• [source] Add missing APU1 reference to x86 board.d   LEDE Commits
• [source] Add missing APU1 reference to x86 board.d   LEDE Commits
• [source] ipq806x: Updated various ipq40xx pin definitions   LEDE Commits
• [source] ipq806x: Enable ubi image for ipq40xx AP-DK04.1-C1 board   LEDE Commits
• [source] ramips: add support for Ubiquiti EdgeRouter X-SFP   LEDE Commits
• [source] ath25: add preliminary kernel 4.9 support   LEDE Commits
• [source] ath25: 4.9: fix GPIO compile issues   LEDE Commits
• [source] ath25: 4.9: fix Ethernet tiny issues   LEDE Commits
• [source] ath25: 4.9: fix Ethernet link autonegotiation   LEDE Commits
• [source] ath25: switch to 4.9 kernel   LEDE Commits
• [source] ath25: drop 4.4 kernel support   LEDE Commits
• [source] linux/ath25: fixing some tabs and whitespace   LEDE Commits
• [source] mvswitch: fix autonegotiation issue   LEDE Commits
• [source] ip17xx: correct aneg_done return value   LEDE Commits
• [source] kernel: update myloader for linux 4.9   LEDE Commits
• [source] build: add KERNEL_MAKE and KERNEL_MAKE_FLAGS variables and move to kernel.mk   LEDE Commits
• [source] mac80211: use KERNEL_MAKEOPTS   LEDE Commits
• [source] kernel: fix segmentation fault in mconf on linux   LEDE Commits
• [source] x86: include USB HID by default   LEDE Commits
• [source] package/grub2: update to 2.02   LEDE Commits
• [source] kernel: add CONFIG_SCHED_HRTICK=y to the generic config   LEDE Commits
• [source] octeon: enable high-res timers   LEDE Commits
• [source] xburst: enable high-res timers, refresh kernel config   LEDE Commits
• [source] rb532: enable high-res timers, refresh kernel config   LEDE Commits
• [source] ath25: add missed HAVE_IRQ_EXIT_ON_IRQ_STACK   LEDE Commits
• [source] kernel: disable CONFIG_SG_POOL by default   LEDE Commits
• [source] kernel: remove CONFIG_ZONE_DMA_FLAG from 4.9   LEDE Commits
• [source] gdb: remove Build/Compile rule ; default one works   LEDE Commits
• [source] gdb: disable simulator ; it's broken on ppc   LEDE Commits
• [source] automake: import upstream fix for perl 5.26   LEDE Commits
• [source] kernel: update kernel 4.4 to 4.4.71   LEDE Commits
• [source] kernel: update kernel 4.4 to 4.4.71   LEDE Commits
• [source] kernel: really select kernel 4.4.71   LEDE Commits
• [source] kernel: update kernel 4.9 to 4.9.31   LEDE Commits
• [source] build: ensure that flock is available for make download   LEDE Commits
• [source] base-files: network.sh: properly report local IPv6 addresses   LEDE Commits
• [source] base-files: network.sh: properly report local IPv6 addresses   LEDE Commits
• [source] automake: import upstream fix for perl 5.26   LEDE Commits
• [source] include/toplevel: set env GIT_ASKPASS=/bin/true   LEDE Commits
• [source] mwlwifi: update to version 10.3.4.0 / 2017-06-06   LEDE Commits
• [source] mwlwifi: update to version 10.3.4.0 / 2017-06-06   LEDE Commits
• [source] base-files: network.sh: fix a number of IPv6 logic flaws   LEDE Commits
• [source] bcm53xx: include wpad-mini only on devices with (supported) wireless   LEDE Commits
• [source] base-files: network.sh: fix a number of IPv6 logic flaws   LEDE Commits
• [source] include/toplevel: set env GIT_ASKPASS=/bin/true   LEDE Commits
• [source] build: ensure that flock is available for make download   LEDE Commits
• [keyring] Add my public key for gpg and usign   LEDE Commits
• [source] dnsmasq: add dhcp-script hook conditionally   LEDE Commits
• [source] kexec-tools: bump version and add support for crashdump kernel   LEDE Commits
• [source] LEDE v17.01.2: adjust config defaults   LEDE Commits
• [source] LEDE v17.01.2: revert to branch defaults   LEDE Commits
• [source] brcm63xx: backport upstream generic gpio changes   LEDE Commits
• [source] kernel: make regmap LZO cache optional   LEDE Commits
• [source] brcm63xx: add pinctrl support   LEDE Commits
• [source] brcm63xx: dsl-275xb-d: configure switch leds   LEDE Commits
• [source] brcm63xx: leds-bcm6328: fix signal assignments for leds 4~7   LEDE Commits
• [source] brcm63xx: switch to hardware led controllers   LEDE Commits
• [source] b53: allow configuration through device tree   LEDE Commits
• [source] brcm63xx: probe SPI connected switches through DT   LEDE Commits
• [source] base-files: board.json's switch reset means existence, not argument   LEDE Commits
• [source] ar71xx/ag71xx_ar7240_get_port_link: fix off-by-one check on argument `port`   LEDE Commits
• [source] ar71xx/ag71xx_mdio_probe: fix a memory leak when probe fails   LEDE Commits
• [source] ar71xx/ag71xx_ethtool: don't return uninitialized return value on success   LEDE Commits
• [source] ar71xx/ar933x_wmac_reset: remove indefinite wait for wmac reset   LEDE Commits
• [source] linux/ledtrig-netdev: remove `unsigned < 0` check   LEDE Commits
• [source] linux/swconfig_get_attr: fix leak of msg in case of error   LEDE Commits
• [source] ar71xx/ar93xx_wmac_otp_read_word: fix wrongly used sizeof(*u)   LEDE Commits
• [source] dnsmasq: make bind-dynamic 'non-wildcard' interfaces default   LEDE Commits
• [source] ar71xx: fixup ar71xx/ar933x_wmac_reset: remove indefinite wait for wmac reset   LEDE Commits
• [source] firmware-utils: tplink-safeloader: support strings as soft_version   LEDE Commits
• [source] ar71xx: image: drop redundant uboot-envtools from DEVICE_PACKAGES   LEDE Commits
• [source] ar71xx: image: drop redundant kmod-usb-ohci from DEVICE_PACKAGES   LEDE Commits
• [source] ar71xx: image: simplify Compex devices definitions   LEDE Commits
• [source] ar71xx: image: keep DEVICE_VARS and Build/* at the beginning   LEDE Commits
• [source] ar71xx: image: keep custom Build/* functions in separate files   LEDE Commits
• [source] ar71xx: image: add ROOTFS_SIZE to DEVICE_VARS   LEDE Commits
• [source] ar71xx: image: cosmetic: drop redundant empty lines   LEDE Commits
• [source] ar71xx: image: drop unused mtdlayouts from legacy.mk   LEDE Commits
• [source] ar71xx: image: fix 8devices boards DEVICE_TITLE   LEDE Commits
• [source] ar71xx: image: update GL.iNet boards DEVICE_TITLE   LEDE Commits
• [source] ar71xx: image: use simply expanded variables   LEDE Commits
• [source] ar71xx: image: mikrotik: shorten DEVICE_TITLE   LEDE Commits
• [source] ar71xx: image: simplify Ubiquiti devices definitions   LEDE Commits
• [source] ar71xx: move WRTnode2Q to generic build target   LEDE Commits
• [source] ar71xx: add support for TP-Link TL-WR942N v1   LEDE Commits
• [source] ar71xx: add support for TP-Link Archer C25 v1   LEDE Commits
• [source] firmware-utils: tplink-safeloader: add TP-Link Archer C25 v1   LEDE Commits
• [source] ar71xx: base-files: cleanups in 11-ath10k-caldata   LEDE Commits
• [source] ar71xx: base-files: cleanups in 10-ar922x-led-fix   LEDE Commits
• [source] ar71xx: image: tp-link.mk: keep devices in alphabetical order   LEDE Commits
• [source] ar71xx: image: fix TP-Link TL-WR710N v2/v2.1 BOARDNAME   LEDE Commits
• [source] ar71xx: image: simplify TP-Link devices definitions   LEDE Commits
• [source] dnsmasq: manage resolv.conf if when listening on 127.0.0.1#53   LEDE Commits
• [source] at91: convert boards to generic build target   LEDE Commits
• [source] kirkwood: add support for Cisco ON100   LEDE Commits
• [source] ramips: fix Phicomm K1S(PSG1208) pinmux   LEDE Commits
• [source] ramips: fix Phicomm K1S(PSG1208) pinmux   LEDE Commits
• [source] Revert "dnsmasq: manage resolv.conf if when listening on 127.0.0.1#53"   LEDE Commits
• [source] imagebuilder: add package_list function   LEDE Commits
• [source] dropbear: fix service trigger syntax error   LEDE Commits
• [source] build: remove old kernel-headers build directories   LEDE Commits
• [source] imagebuilder: clean package_list   LEDE Commits
• [source] imagebuilder: don't rewrite package list output   LEDE Commits
• [source] ath10k: increase bmi timeout to fix OTP on qca99xx boards and add bmi identification through pre-cal file   LEDE Commits
• [source] ipq806x: qca99xx: fix wifi calibration   LEDE Commits
• [source] mac80211: refresh patches   LEDE Commits
• [source] libubox: update to the latest version, fixes a runqueue use-after-free bug   LEDE Commits
• [source] mt76: update to the latest version, fixes rate control issues   LEDE Commits
• [source] dropbear: fix service trigger syntax error   LEDE Commits
• [source] build: move definition of KBUILD_BUILD_TIMESTAMP to include/kernel.mk   LEDE Commits
• [source] lantiq: restore netdev trigger of dsl led on line up   LEDE Commits
• [source] lantiq: show xdsl line init status on shared dsl/internet led   LEDE Commits
• [source] ramips: add support for TRENDnet TEW-638APB V2   LEDE Commits
• [source] base-files: make ucidef_set_led_rssi offset and factor optional   LEDE Commits
• [source] ramips: remove optional ucidef_set_led_rssi parameters   LEDE Commits
• [source] base-files: allocate uid/gid starting from 65536   LEDE Commits
• [source] scripts/package-metadata.pl: parse and validate field Require-User   LEDE Commits
• [source] netifd: update to the latest version   LEDE Commits
• [source] libunwind: update to version 1.2.1   LEDE Commits
• [source] firmware-utils: honor env SOURCE_DATE_EPOCH   LEDE Commits
• [source] mtd-utils/mkfs.jffs2: honor env SOURCE_DATE_EPOCH   LEDE Commits
• [source] build: Fix not altering KERNELRELEASE for external kernel   LEDE Commits
• [source] Revert "dnsmasq: don't point --resolv-file to default location unconditionally"   LEDE Commits
• [source] procd: update to latest git HEAD   LEDE Commits
• [source] dnsmasq: add dhcp-range tags configuration   LEDE Commits
• [source] base-files: fix PKG_CONFIG_DEPENDS to include version.mk entries   LEDE Commits
• [source] kernel: backport Broadcom thermal drivers   LEDE Commits
• [source] bcm53xx: enable Northstar thermal driver   LEDE Commits
• [source] kernel: don't switch allocate_partition to use mtd_roundup_to_eb   LEDE Commits
• [source] kernel: backport upstream mtdpart.c cleanups   LEDE Commits
• [source] kernel: backport upstream mtd support for partition parsers   LEDE Commits
• [source] kernel: backport MTD patch extracing TRX code to separated parser   LEDE Commits
• [source] procd: update to latest version   LEDE Commits
• [source] busybox: backport 'ip rule suppress_{prefixlength, ifgroup}'   LEDE Commits
• [source] hostapd: add support for acs_chan_bias option   LEDE Commits
• [source] gcc: gcc 6.3.0 fix comparison between pointer and integer   LEDE Commits
• [source] busybox: ash/hush fix for read-builtin command   LEDE Commits
• [source] ca-certificates: Update to version 20161130+nmu1   LEDE Commits
• [source] valgrind: bump to 3.13.0   LEDE Commits
• [source] libreadline: add host-build   LEDE Commits
• [source] fritz_tffs_read: get tffs size from input file   LEDE Commits
• [source] kernel: move Lantiq PEF7061/7071/7072 phy driver to generic   LEDE Commits
• [source] build: move lzma2eva build step to image-commands.mk   LEDE Commits
• [source] ar71xx: add AR724x PCIe init fixes   LEDE Commits
• [source] ar71xx: add AVM FRITZ!WLAN Repeater 300E support   LEDE Commits
• [source] ramips: add MT7603E driver to AFoundry EW1200   LEDE Commits
• [source] treewide: add license tags   LEDE Commits
• [source] apm821xx: MR24: fix ethernet phy detection on the MR24   LEDE Commits
• [source] ar71xx/image: make tar calls reproducible   LEDE Commits
• [source] ar71xx/images/senao: fix reproducible issue using tar   LEDE Commits
• [source] mbedtls: update to 2.5.1   LEDE Commits
• [source] openvpn: update to 2.4.3   LEDE Commits
• [source] mbedtls: update to 2.5.1   LEDE Commits
• [source] openvpn: update to 2.4.3   LEDE Commits
• [source] base-files: add "tty" user group   LEDE Commits
• [source] procd: assign /dev/tty* nodes to "tty" group   LEDE Commits
• [source] procd: support term_timeout parameter   LEDE Commits
• [source] ca-certificates: Update to version 20161130+nmu1   LEDE Commits
• [source] dnsmasq: backport tweak ICMP ping logic for DHCPv4   LEDE Commits
• [source] firmware-utils: fix dgn3500sum compiler warnings   LEDE Commits
• [source] firmware-utils: fix dgn3500sum compiler warnings   LEDE Commits
• [source] bcm53xx: include wpad-mini only on devices with (supported) wireless   LEDE Commits
• [source] base-files: fix PKG_CONFIG_DEPENDS to include version.mk entries   LEDE Commits
• [source] kernel: use .patch extension for all patches   LEDE Commits
• [source] kernel: update kernel 4.9 to 4.9.34   LEDE Commits
• [source] kernel: update kernel 4.4 to 4.4.74   LEDE Commits
• [source] ath10k-firmware: add qca9888 firmware   LEDE Commits
• [source] ipq806x: fixup thermal patches   LEDE Commits
• [source] kernel: update kernel 4.4 to 4.4.74   LEDE Commits
• [source] kernel: disable various symbols for v4.9   LEDE Commits
• [source] mxs: add support for 4.9 and switch over   LEDE Commits
• [source] mxs: drop 4.4 support   LEDE Commits
• [source] procd: backport fixes from master branch   LEDE Commits
• [source] hostapd: add acct_interval option   LEDE Commits
• [source] hostapd: configure NAS ID regardless of encryption   LEDE Commits
• [source] dropbear: server support option '-T' max auth tries   LEDE Commits
• [source] dropbear: add option to set max auth tries   LEDE Commits
• [source] kernel: backport usbport LED trigger driver support for DT   LEDE Commits
• [source] dnsmasq: backport patch fixing DNS failover (FS#841)   LEDE Commits
• [source] armvirt: rename config-default to config-4.9   LEDE Commits
• [source] kernel: cleanup CONFIG_SCHED_HRTICK   LEDE Commits
• [source] dhcpv6: add missing dollar sign in dhcpv6 script (FS#874)   LEDE Commits
• [source] dhcpv6: add missing dollar sign in dhcpv6 script (FS#874)   LEDE Commits
• [source] ar71xx: wpj344: read MAC addresses from u-boot mtd   LEDE Commits
• [source] ar71xx: wpj344: remove unused eth1 device   LEDE Commits
• [source] ar71xx: wpj344: set MAC on wan   LEDE Commits
• [source] ar71xx: remove Arduino Yun 8 MiB prototype   LEDE Commits
• [source] ar71xx: move Arduino Yun to generic building code   LEDE Commits
• [source] uboot-envtools: add Arduino Yun support   LEDE Commits
• [source] ar71xx: fix EnGenius ENS202EXT mtd definition   LEDE Commits
• [source] ar71xx: add support for TP-Link TL-WA855RE v1   LEDE Commits
• [source] firmware-utils: tplink-safeloader: add support for Archer C59/C60 RU   LEDE Commits
• [source] firmware-utils: tplink-safeloader: add support for Archer C5 v2 JP/US   LEDE Commits
• [source] ar71xx: add support for TP-Link Archer C58 v1   LEDE Commits
• [source] ar71xx: fix switch port mapping for TP-Link TL-WR74xN/D series   LEDE Commits
• [source] firmware-utils: mktplinkfw2: support additional hardware version   LEDE Commits
• [source] build: rename TPLINK_BOARD_NAME to TPLINK_BOARD_ID   LEDE Commits
• [source] build: move mktplinkfw2 related commands to image-commands.mk   LEDE Commits
• [source] ramips: image: simplify TP-Link Archer devices definitions   LEDE Commits
• [source] ramips: add support for TP-Link TL-WR840N v4 and TL-WR841N v13   LEDE Commits
• [source] ar71xx: image: specify TPLINK_HWID for TP-Link RE450   LEDE Commits
• [source] ar71xx: fix typo in network defaults   LEDE Commits
• [source] brcm63xx: fix bcm6328 pinmux other register   LEDE Commits
• [source] brcm63xx: add support for the Actiontec R1000H gateway   LEDE Commits
• [source] brcm63xx: disable commandline parts parser   LEDE Commits
• [source] brcm63xx: enable KEXEC for SMP again   LEDE Commits
• [source] brcm63xx: refresh smp config   LEDE Commits
• [source] kernel: add missing symbol to generic   LEDE Commits

Last message date: Fri Jun 30 03:39:22 PDT 2017
Archived on: Fri Jun 30 03:41:54 PDT 2017

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...