[source] ar71xx: add AR724x PCIe init fixes
LEDE Commits
lede-commits at lists.infradead.org
Sat Jun 24 13:38:02 PDT 2017
mkresin pushed a commit to source.git, branch master:
https://git.lede-project.org/0605b15be405ddaf9499e02f4b5a59ba406d2ccd
commit 0605b15be405ddaf9499e02f4b5a59ba406d2ccd
Author: Mathias Kresin <dev at kresin.me>
AuthorDate: Thu Mar 30 22:01:09 2017 +0200
ar71xx: add AR724x PCIe init fixes
Add upstream send AR724x PCIe patches to get the PCIe controller out of
reset during driver init.
The AVM Fritz 300E bootloader doesn't take care of releasing the
different PCIe controller related resets which causes an endless hang
as soon as either the PCIE Reset register (0x180f0018) or the PCI
Application Control register (0x180f0000) is read from.
Signed-off-by: Mathias Kresin <dev at kresin.me>
---
...h79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch | 29 ++++++
...PS-ath79-do-AR724x-PCIe-root-complex-init.patch | 113 +++++++++++++++++++++
.../601-MIPS-ath79-add-more-register-defines.patch | 16 +--
...20-MIPS-ath79-add-support-for-QCA953x-SoC.patch | 22 ++--
...21-MIPS-ath79-add-support-for-QCA956x-SoC.patch | 16 +--
...add-more-register-defines-for-QCA956x-SoC.patch | 4 +-
.../820-MIPS-ath79-add_gpio_function2_setup.patch | 4 +-
.../920-usb-chipidea-AR933x-platform-support.patch | 4 +-
8 files changed, 175 insertions(+), 33 deletions(-)
diff --git a/target/linux/ar71xx/patches-4.4/106-01-MIPS-ath79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch b/target/linux/ar71xx/patches-4.4/106-01-MIPS-ath79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch
new file mode 100644
index 0000000..e785b30
--- /dev/null
+++ b/target/linux/ar71xx/patches-4.4/106-01-MIPS-ath79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch
@@ -0,0 +1,29 @@
+From 0f15814bcdf59f10b708a3fba636acb089e9a4f1 Mon Sep 17 00:00:00 2001
+From: Mathias Kresin <dev at kresin.me>
+Date: Thu, 30 Mar 2017 15:34:39 +0200
+Subject: [PATCH] MIPS: ath79: fix AR724X_PLL_REG_PCIE_CONFIG offset
+
+According to the QCA u-boot source the "PCIE Phase Lock Loop
+Configuration (PCIE_PLL_CONFIG)" register is for all SoCs except the
+QCA955X and QCA956X at offset 0x10.
+
+Since the PCIE PLL config register is only defined for the AR724x fix
+only this value. The value is wrong since the day it was added and isn't
+yet used by any driver.
+
+Signed-off-by: Mathias Kresin <dev at kresin.me>
+---
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -167,7 +167,7 @@
+ #define AR71XX_AHB_DIV_MASK 0x7
+
+ #define AR724X_PLL_REG_CPU_CONFIG 0x00
+-#define AR724X_PLL_REG_PCIE_CONFIG 0x18
++#define AR724X_PLL_REG_PCIE_CONFIG 0x10
+
+ #define AR724X_PLL_FB_SHIFT 0
+ #define AR724X_PLL_FB_MASK 0x3ff
diff --git a/target/linux/ar71xx/patches-4.4/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch b/target/linux/ar71xx/patches-4.4/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch
new file mode 100644
index 0000000..d3948b8
--- /dev/null
+++ b/target/linux/ar71xx/patches-4.4/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch
@@ -0,0 +1,113 @@
+From 460f382c278fe66059a773c41cbcd0db86d53983 Mon Sep 17 00:00:00 2001
+From: Mathias Kresin <dev at kresin.me>
+Date: Thu, 13 Apr 2017 09:47:42 +0200
+Subject: [PATCH] MIPS: pci-ar724x: get PCIe controller out of reset
+
+The ar724x pci driver expects the PCIe controller to be brought out of
+reset by the bootloader.
+
+At least the AVM Fritz 300E bootloader doesn't take care of releasing
+the different PCIe controller related resets which causes an endless
+hang as soon as either the PCIE Reset register (0x180f0018) or the PCI
+Application Control register (0x180f0000) is read from.
+
+Do the full "PCIE Root Complex Initialization Sequence" if the PCIe
+host controller is still in reset during probing.
+
+The QCA u-boot sleeps 10ms after the PCIE Application Control bit is
+set to ready. It has been shown that 10ms might not be enough time if
+PCIe should be used right after setting the bit. During my tests it
+took up to 20ms till the link was up. Giving the link up to 100ms
+should work for all cases.
+
+Signed-off-by: Mathias Kresin <dev at kresin.me>
+---
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 3 ++
+ arch/mips/pci/pci-ar724x.c | 42 ++++++++++++++++++++++++++
+ 2 files changed, 45 insertions(+)
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -169,6 +169,9 @@
+ #define AR724X_PLL_REG_CPU_CONFIG 0x00
+ #define AR724X_PLL_REG_PCIE_CONFIG 0x10
+
++#define AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS BIT(16)
++#define AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET BIT(25)
++
+ #define AR724X_PLL_FB_SHIFT 0
+ #define AR724X_PLL_FB_MASK 0x3ff
+ #define AR724X_PLL_REF_DIV_SHIFT 10
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -12,14 +12,18 @@
+ #include <linux/irq.h>
+ #include <linux/pci.h>
+ #include <linux/module.h>
++#include <linux/delay.h>
+ #include <linux/platform_device.h>
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/ar71xx_regs.h>
+
++#define AR724X_PCI_REG_APP 0x0
+ #define AR724X_PCI_REG_RESET 0x18
+ #define AR724X_PCI_REG_INT_STATUS 0x4c
+ #define AR724X_PCI_REG_INT_MASK 0x50
+
++#define AR724X_PCI_APP_LTSSM_ENABLE BIT(0)
++
+ #define AR724X_PCI_RESET_LINK_UP BIT(0)
+
+ #define AR724X_PCI_INT_DEV0 BIT(14)
+@@ -325,6 +329,37 @@ static void ar724x_pci_irq_init(struct a
+ apc);
+ }
+
++static void ar724x_pci_hw_init(struct ar724x_pci_controller *apc)
++{
++ u32 ppl, app;
++ int wait = 0;
++
++ /* deassert PCIe host controller and PCIe PHY reset */
++ ath79_device_reset_clear(AR724X_RESET_PCIE);
++ ath79_device_reset_clear(AR724X_RESET_PCIE_PHY);
++
++ /* remove the reset of the PCIE PLL */
++ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
++ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
++ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
++
++ /* deassert bypass for the PCIE PLL */
++ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
++ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
++ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
++
++ /* set PCIE Application Control to ready */
++ app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP);
++ app |= AR724X_PCI_APP_LTSSM_ENABLE;
++ __raw_writel(app, apc->ctrl_base + AR724X_PCI_REG_APP);
++
++ /* wait up to 100ms for PHY link up */
++ do {
++ mdelay(10);
++ wait++;
++ } while (wait < 10 && !ar724x_pci_check_link(apc));
++}
++
+ static int ar724x_pci_probe(struct platform_device *pdev)
+ {
+ struct ar724x_pci_controller *apc;
+@@ -383,6 +418,13 @@ static int ar724x_pci_probe(struct platf
+ apc->pci_controller.io_resource = &apc->io_res;
+ apc->pci_controller.mem_resource = &apc->mem_res;
+
++ /*
++ * Do the full PCIE Root Complex Initialization Sequence if the PCIe
++ * host controller is in reset.
++ */
++ if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE)
++ ar724x_pci_hw_init(apc);
++
+ apc->link_up = ar724x_pci_check_link(apc);
+ if (!apc->link_up)
+ dev_warn(&pdev->dev, "PCIe link is down\n");
diff --git a/target/linux/ar71xx/patches-4.4/601-MIPS-ath79-add-more-register-defines.patch b/target/linux/ar71xx/patches-4.4/601-MIPS-ath79-add-more-register-defines.patch
index e4d82ac..d0f5b78 100644
--- a/target/linux/ar71xx/patches-4.4/601-MIPS-ath79-add-more-register-defines.patch
+++ b/target/linux/ar71xx/patches-4.4/601-MIPS-ath79-add-more-register-defines.patch
@@ -66,9 +66,9 @@
+#define AR71XX_ETH1_PLL_SHIFT 19
+
#define AR724X_PLL_REG_CPU_CONFIG 0x00
- #define AR724X_PLL_REG_PCIE_CONFIG 0x18
+ #define AR724X_PLL_REG_PCIE_CONFIG 0x10
-@@ -193,6 +212,8 @@
+@@ -196,6 +215,8 @@
#define AR724X_DDR_DIV_SHIFT 22
#define AR724X_DDR_DIV_MASK 0x3
@@ -77,7 +77,7 @@
#define AR913X_PLL_REG_CPU_CONFIG 0x00
#define AR913X_PLL_REG_ETH_CONFIG 0x04
#define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14
-@@ -205,6 +226,9 @@
+@@ -208,6 +229,9 @@
#define AR913X_AHB_DIV_SHIFT 19
#define AR913X_AHB_DIV_MASK 0x1
@@ -87,7 +87,7 @@
#define AR933X_PLL_CPU_CONFIG_REG 0x00
#define AR933X_PLL_CLOCK_CTRL_REG 0x08
-@@ -226,6 +250,8 @@
+@@ -229,6 +253,8 @@
#define AR934X_PLL_CPU_CONFIG_REG 0x00
#define AR934X_PLL_DDR_CONFIG_REG 0x04
#define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08
@@ -96,7 +96,7 @@
#define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
#define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-@@ -258,9 +284,13 @@
+@@ -261,9 +287,13 @@
#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
@@ -110,7 +110,7 @@
#define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
#define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-@@ -385,16 +415,83 @@
+@@ -388,16 +418,83 @@
#define AR913X_RESET_USB_HOST BIT(5)
#define AR913X_RESET_USB_PHY BIT(4)
@@ -194,7 +194,7 @@
#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
-@@ -536,8 +633,22 @@
+@@ -539,8 +636,22 @@
#define AR71XX_GPIO_REG_INT_ENABLE 0x24
#define AR71XX_GPIO_REG_FUNC 0x28
@@ -217,7 +217,7 @@
#define AR71XX_GPIO_COUNT 16
#define AR7240_GPIO_COUNT 18
#define AR7241_GPIO_COUNT 20
-@@ -567,4 +678,235 @@
+@@ -570,4 +681,235 @@
#define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13
#define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
diff --git a/target/linux/ar71xx/patches-4.4/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch b/target/linux/ar71xx/patches-4.4/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch
index 64ebf59..d117f94 100644
--- a/target/linux/ar71xx/patches-4.4/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch
+++ b/target/linux/ar71xx/patches-4.4/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch
@@ -459,7 +459,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
/*
* PLL block
*/
-@@ -286,6 +307,44 @@
+@@ -289,6 +310,44 @@
#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6)
@@ -504,7 +504,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
#define QCA955X_PLL_CPU_CONFIG_REG 0x00
#define QCA955X_PLL_DDR_CONFIG_REG 0x04
#define QCA955X_PLL_CLK_CTRL_REG 0x08
-@@ -362,6 +421,10 @@
+@@ -365,6 +424,10 @@
#define AR934X_RESET_REG_BOOTSTRAP 0xb0
#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
@@ -515,7 +515,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
#define QCA955X_RESET_REG_RESET_MODULE 0x1c
#define QCA955X_RESET_REG_BOOTSTRAP 0xb0
#define QCA955X_RESET_REG_EXT_INT_STATUS 0xac
-@@ -457,6 +520,27 @@
+@@ -460,6 +523,27 @@
#define AR934X_RESET_MBOX BIT(1)
#define AR934X_RESET_I2S BIT(0)
@@ -543,7 +543,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
#define QCA955X_RESET_HOST BIT(31)
#define QCA955X_RESET_SLIC BIT(30)
#define QCA955X_RESET_HDMA BIT(29)
-@@ -510,6 +594,13 @@
+@@ -513,6 +597,13 @@
#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
#define AR934X_BOOTSTRAP_DDR1 BIT(0)
@@ -557,7 +557,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
#define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4)
#define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
-@@ -530,6 +621,24 @@
+@@ -533,6 +624,24 @@
AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
AR934X_PCIE_WMAC_INT_PCIE_RC3)
@@ -582,7 +582,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
#define QCA955X_EXT_INT_WMAC_MISC BIT(0)
#define QCA955X_EXT_INT_WMAC_TX BIT(1)
#define QCA955X_EXT_INT_WMAC_RXLP BIT(2)
-@@ -572,6 +681,8 @@
+@@ -575,6 +684,8 @@
#define REV_ID_MAJOR_AR9341 0x0120
#define REV_ID_MAJOR_AR9342 0x1120
#define REV_ID_MAJOR_AR9344 0x2120
@@ -591,7 +591,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
#define REV_ID_MAJOR_QCA9556 0x0130
#define REV_ID_MAJOR_QCA9558 0x1130
-@@ -594,6 +705,8 @@
+@@ -597,6 +708,8 @@
#define AR934X_REV_ID_REVISION_MASK 0xf
@@ -600,7 +600,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
#define QCA955X_REV_ID_REVISION_MASK 0xf
/*
-@@ -641,6 +754,25 @@
+@@ -644,6 +757,25 @@
#define AR934X_GPIO_REG_OUT_FUNC5 0x40
#define AR934X_GPIO_REG_FUNC 0x6c
@@ -626,7 +626,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
#define QCA955X_GPIO_REG_OUT_FUNC0 0x2c
#define QCA955X_GPIO_REG_OUT_FUNC1 0x30
#define QCA955X_GPIO_REG_OUT_FUNC2 0x34
-@@ -655,6 +787,7 @@
+@@ -658,6 +790,7 @@
#define AR913X_GPIO_COUNT 22
#define AR933X_GPIO_COUNT 30
#define AR934X_GPIO_COUNT 23
@@ -634,7 +634,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
#define QCA955X_GPIO_COUNT 24
/*
-@@ -678,6 +811,24 @@
+@@ -681,6 +814,24 @@
#define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13
#define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
@@ -659,7 +659,7 @@ meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17)
#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16)
#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13)
-@@ -884,6 +1035,16 @@
+@@ -887,6 +1038,16 @@
#define AR934X_ETH_CFG_RDV_DELAY_SHIFT 16
/*
diff --git a/target/linux/ar71xx/patches-4.4/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch b/target/linux/ar71xx/patches-4.4/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch
index d8bb248..1f3a198 100644
--- a/target/linux/ar71xx/patches-4.4/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch
+++ b/target/linux/ar71xx/patches-4.4/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch
@@ -522,7 +522,7 @@
* DDR_CTRL block
*/
#define AR71XX_DDR_REG_PCI_WIN0 0x7c
-@@ -382,6 +406,49 @@
+@@ -385,6 +409,49 @@
#define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
#define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
@@ -572,7 +572,7 @@
/*
* USB_CONFIG block
*/
-@@ -429,6 +496,11 @@
+@@ -432,6 +499,11 @@
#define QCA955X_RESET_REG_BOOTSTRAP 0xb0
#define QCA955X_RESET_REG_EXT_INT_STATUS 0xac
@@ -584,7 +584,7 @@
#define MISC_INT_ETHSW BIT(12)
#define MISC_INT_TIMER4 BIT(10)
#define MISC_INT_TIMER3 BIT(9)
-@@ -603,6 +675,8 @@
+@@ -606,6 +678,8 @@
#define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4)
@@ -593,7 +593,7 @@
#define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
#define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1)
#define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
-@@ -670,6 +744,37 @@
+@@ -673,6 +747,37 @@
QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \
QCA955X_EXT_INT_PCIE_RC2_INT3)
@@ -631,7 +631,7 @@
#define REV_ID_MAJOR_MASK 0xfff0
#define REV_ID_MAJOR_AR71XX 0x00a0
#define REV_ID_MAJOR_AR913X 0x00b0
-@@ -685,6 +790,8 @@
+@@ -688,6 +793,8 @@
#define REV_ID_MAJOR_QCA9533_V2 0x0160
#define REV_ID_MAJOR_QCA9556 0x0130
#define REV_ID_MAJOR_QCA9558 0x1130
@@ -640,7 +640,7 @@
#define AR71XX_REV_ID_MINOR_MASK 0x3
#define AR71XX_REV_ID_MINOR_AR7130 0x0
-@@ -709,6 +816,8 @@
+@@ -712,6 +819,8 @@
#define QCA955X_REV_ID_REVISION_MASK 0xf
@@ -649,7 +649,7 @@
/*
* SPI block
*/
-@@ -781,6 +890,19 @@
+@@ -784,6 +893,19 @@
#define QCA955X_GPIO_REG_OUT_FUNC5 0x40
#define QCA955X_GPIO_REG_FUNC 0x6c
@@ -669,7 +669,7 @@
#define AR71XX_GPIO_COUNT 16
#define AR7240_GPIO_COUNT 18
#define AR7241_GPIO_COUNT 20
-@@ -789,6 +911,7 @@
+@@ -792,6 +914,7 @@
#define AR934X_GPIO_COUNT 23
#define QCA953X_GPIO_COUNT 18
#define QCA955X_GPIO_COUNT 24
diff --git a/target/linux/ar71xx/patches-4.4/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch b/target/linux/ar71xx/patches-4.4/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch
index 6573b29..cab2f6f 100644
--- a/target/linux/ar71xx/patches-4.4/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch
+++ b/target/linux/ar71xx/patches-4.4/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch
@@ -11,7 +11,7 @@
#define QCA956X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
#define QCA956X_GMAC_SIZE 0x64
-@@ -411,6 +415,7 @@
+@@ -414,6 +418,7 @@
#define QCA956X_PLL_DDR_CONFIG_REG 0x08
#define QCA956X_PLL_DDR_CONFIG1_REG 0x0c
#define QCA956X_PLL_CLK_CTRL_REG 0x10
@@ -19,7 +19,7 @@
#define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
#define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-@@ -1193,4 +1198,16 @@
+@@ -1196,4 +1201,16 @@
#define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3
#define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20
diff --git a/target/linux/ar71xx/patches-4.4/820-MIPS-ath79-add_gpio_function2_setup.patch b/target/linux/ar71xx/patches-4.4/820-MIPS-ath79-add_gpio_function2_setup.patch
index 4d72a6c..a773e57 100644
--- a/target/linux/ar71xx/patches-4.4/820-MIPS-ath79-add_gpio_function2_setup.patch
+++ b/target/linux/ar71xx/patches-4.4/820-MIPS-ath79-add_gpio_function2_setup.patch
@@ -48,7 +48,7 @@ functions on the Arduino Yun.
void __iomem *reg = ath79_gpio_get_function_reg();
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -862,6 +862,7 @@
+@@ -865,6 +865,7 @@
#define AR71XX_GPIO_REG_INT_PENDING 0x20
#define AR71XX_GPIO_REG_INT_ENABLE 0x24
#define AR71XX_GPIO_REG_FUNC 0x28
@@ -56,7 +56,7 @@ functions on the Arduino Yun.
#define AR934X_GPIO_REG_OUT_FUNC0 0x2c
#define AR934X_GPIO_REG_OUT_FUNC1 0x30
-@@ -986,6 +987,8 @@
+@@ -989,6 +990,8 @@
#define AR724X_GPIO_FUNC_UART_EN BIT(1)
#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0)
diff --git a/target/linux/ar71xx/patches-4.4/920-usb-chipidea-AR933x-platform-support.patch b/target/linux/ar71xx/patches-4.4/920-usb-chipidea-AR933x-platform-support.patch
index 1aa4120..1a78af0 100644
--- a/target/linux/ar71xx/patches-4.4/920-usb-chipidea-AR933x-platform-support.patch
+++ b/target/linux/ar71xx/patches-4.4/920-usb-chipidea-AR933x-platform-support.patch
@@ -1,6 +1,6 @@
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -656,6 +656,7 @@
+@@ -659,6 +659,7 @@
#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
#define AR933X_BOOTSTRAP_EEPBUSY BIT(4)
@@ -8,7 +8,7 @@
#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
-@@ -685,6 +686,8 @@
+@@ -688,6 +689,8 @@
#define QCA956X_BOOTSTRAP_REF_CLK_40 BIT(2)
More information about the lede-commits
mailing list