[source] firmware-utils: tplink-safeloader: support strings as soft_version
LEDE Commits
lede-commits at lists.infradead.org
Sun Jun 11 13:13:59 PDT 2017
pepe2k pushed a commit to source.git, branch master:
https://git.lede-project.org/c4022243d8fe198b41488bc736f1c6cc3c7895bf
commit c4022243d8fe198b41488bc736f1c6cc3c7895bf
Author: Jan Niehusmann <jan at gondor.com>
AuthorDate: Fri May 19 09:42:24 2017 +0200
firmware-utils: tplink-safeloader: support strings as soft_version
Some TP-Link routers (C25, C59, C60) contain a version string instead
of a binary structure in the soft_version partition.
Flashing LEDE from the original firmware's GUI, this version string
taken from the soft_ver partition of the firmware image is written to
the router's config partition.
When using tftp recovery to go back to the original Archer C25 firmware,
a version check compares that version to the version of the firmware to
be flashed.
Without proper contents in the config partition, reverting to the
original firmware fails.
Therefore, write the string "soft_ver:1.0.0\n" to that soft_ver
partition.
Signed-off-by: Jan Niehusmann <jan at gondor.com>
---
tools/firmware-utils/src/tplink-safeloader.c | 37 +++++++++++++++++++++++++++-
1 file changed, 36 insertions(+), 1 deletion(-)
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index 19d67c3..9c9efc3 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -75,6 +75,7 @@ struct device_info {
const char *vendor;
const char *support_list;
char support_trail;
+ const char *soft_ver;
const struct flash_partition_entry partitions[MAX_PARTITIONS+1];
const char *first_sysupgrade_partition;
const char *last_sysupgrade_partition;
@@ -130,6 +131,7 @@ static struct device_info boards[] = {
"CPE220(TP-LINK|US|N300-2):1.1\r\n"
"CPE220(TP-LINK|EU|N300-2):1.1\r\n",
.support_trail = '\xff',
+ .soft_ver = NULL,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
@@ -167,6 +169,7 @@ static struct device_info boards[] = {
"CPE520(TP-LINK|US|N300-5):1.1\r\n"
"CPE520(TP-LINK|EU|N300-5):1.1\r\n",
.support_trail = '\xff',
+ .soft_ver = NULL,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
@@ -198,6 +201,7 @@ static struct device_info boards[] = {
"WBS210(TP-LINK|US|N300-2):1.20\r\n"
"WBS210(TP-LINK|EU|N300-2):1.20\r\n",
.support_trail = '\xff',
+ .soft_ver = NULL,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
@@ -229,6 +233,7 @@ static struct device_info boards[] = {
"WBS510(TP-LINK|US|N300-5):1.20\r\n"
"WBS510(TP-LINK|EU|N300-5):1.20\r\n",
.support_trail = '\xff',
+ .soft_ver = NULL,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
@@ -259,6 +264,7 @@ static struct device_info boards[] = {
"SupportList:\r\n"
"{product_name:Archer C2600,product_ver:1.0.0,special_id:00000000}\r\n",
.support_trail = '\x00',
+ .soft_ver = NULL,
.partitions = {
{"SBL1", 0x00000, 0x20000},
@@ -303,6 +309,7 @@ static struct device_info boards[] = {
"{product_name:Archer C59,product_ver:1.0.0,special_id:45550000}\r\n"
"{product_name:Archer C59,product_ver:1.0.0,special_id:55530000}\r\n",
.support_trail = '\x00',
+ .soft_ver = "soft_ver:1.0.0\n",
.partitions = {
{"fs-uboot", 0x00000, 0x10000},
@@ -340,6 +347,7 @@ static struct device_info boards[] = {
"{product_name:Archer C60,product_ver:1.0.0,special_id:45550000}\r\n"
"{product_name:Archer C60,product_ver:1.0.0,special_id:55530000}\r\n",
.support_trail = '\x00',
+ .soft_ver = "soft_ver:1.0.0\n",
.partitions = {
{"fs-uboot", 0x00000, 0x10000},
@@ -374,6 +382,7 @@ static struct device_info boards[] = {
"product_ver:2.0.0,"
"special_id:00000000}\r\n",
.support_trail = '\x00',
+ .soft_ver = NULL,
.partitions = {
{"fs-uboot", 0x00000, 0x40000},
@@ -408,6 +417,7 @@ static struct device_info boards[] = {
"product_ver:1.0.0,"
"special_id:00000000}\n",
.support_trail = '\x00',
+ .soft_ver = NULL,
.partitions = {
{"fs-uboot", 0x00000, 0x40000},
@@ -440,6 +450,7 @@ static struct device_info boards[] = {
"SupportList:\r\n"
"EAP120(TP-LINK|UN|N300-2):1.0\r\n",
.support_trail = '\xff',
+ .soft_ver = NULL,
.partitions = {
{"fs-uboot", 0x00000, 0x20000},
@@ -478,6 +489,7 @@ static struct device_info boards[] = {
"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:41550000}\n"
"{product_name:TL-WA850RE,product_ver:2.0.0,special_id:52550000}\n",
.support_trail = '\x00',
+ .soft_ver = NULL,
/**
576KB were moved from file-system to os-image
@@ -512,6 +524,7 @@ static struct device_info boards[] = {
"SupportList:\n"
"{product_name:TL-WR1043ND,product_ver:4.0.0,special_id:45550000}\n",
.support_trail = '\x00',
+ .soft_ver = NULL,
/**
We use a bigger os-image partition than the stock images (and thus
@@ -555,6 +568,7 @@ static struct device_info boards[] = {
"{product_name:RE450,product_ver:1.0.0,special_id:4B520000}\r\n"
"{product_name:RE450,product_ver:1.0.0,special_id:55534100}\r\n",
.support_trail = '\x00',
+ .soft_ver = NULL,
/**
The flash partition table for RE450;
@@ -683,6 +697,23 @@ static struct image_partition_entry make_soft_version(uint32_t rev) {
return entry;
}
+static struct image_partition_entry make_soft_version_from_string(const char *soft_ver) {
+ /** String length _including_ the terminating zero byte */
+ uint32_t ver_len = strlen(soft_ver) + 1;
+ /** Partition contains 64 bit header, the version string, and one additional null byte */
+ size_t partition_len = 2*sizeof(uint32_t) + ver_len + 1;
+ struct image_partition_entry entry = alloc_image_partition("soft-version", partition_len);
+
+ uint32_t *len = (uint32_t *)entry.data;
+ len[0] = htonl(ver_len);
+ len[1] = 0;
+ memcpy(&len[2], soft_ver, ver_len);
+
+ entry.data[partition_len - 1] = 0;
+
+ return entry;
+}
+
/** Generates the support-list partition */
static struct image_partition_entry make_support_list(const struct device_info *info) {
size_t len = strlen(info->support_list);
@@ -913,7 +944,11 @@ static void build_image(const char *output,
struct image_partition_entry parts[6] = {};
parts[0] = make_partition_table(info->partitions);
- parts[1] = make_soft_version(rev);
+ if (info->soft_ver)
+ parts[1] = make_soft_version_from_string(info->soft_ver);
+ else
+ parts[1] = make_soft_version(rev);
+
parts[2] = make_support_list(info);
parts[3] = read_file("os-image", kernel_image, false);
parts[4] = read_file("file-system", rootfs_image, add_jffs2_eof);
More information about the lede-commits
mailing list