[source] lantiq: add Allnet ALL0333CJ support

LEDE Commits lede-commits at lists.infradead.org
Sat Jun 3 13:20:04 PDT 2017


hauke pushed a commit to source.git, branch master:
https://git.lede-project.org/712ebe95f81de11796d1ba02dfc1a402dbd203a2

commit 712ebe95f81de11796d1ba02dfc1a402dbd203a2
Author: Tino Reichardt <milky-lede at mcmilk.de>
AuthorDate: Sun Feb 26 21:29:37 2017 +0100

    lantiq: add Allnet ALL0333CJ support
    
    This patch adds support for the Allnet ADSL2+ Modem ALL0333CJ.
    
    Specifications:
    - SoC: Amazon-SE
    - RAM: 16MB
    - Storage: 4MB NOR FLash
    - LEDs: Power, Ethernet, DSL (Sync)
    - Buttons: 1x Reset Button (not currently supported, will be done)
    - 1x Ethernet-Port: 1x RJ45 10/100BaseTX
    - 1x WAN-Port: AnnexB & J, G.992.1(ADSL), G.992.3(ADSL2), G.992.5(ADSL2+)
    
    Installation:
    - can be done via telnet+tftp or serial console
    - default passwords:
      - via telnet (root:admin)
      - via webinterface http://172.16.1.254:8235/ (admin:coolwhite)
    
    Installation via telnet / tftp:
    host: # your own host must have an tftpd daemon, then do this:
    host: ifconfig eth0:172 172.16.1.1 up
    host: # telnet to allnet modem, root:admin
    host: telnet 172.16.1.254
    modem: # kill this daemon, it spams your console
    modem: killall dsl_cpe_control
    modem: # change to some place in ram:
    modem: cd /ramdisk/tftp_upload
    modem: # load lede-lantiq-ase-ALL0333CJ-squashfs-sysupgrade.bin alias uImage
    modem: tftp -g -r uImage 172.16.1.1
    modem: # load these extra tools from your tftpd via:
    modem: # source: https://github.com/mcmilk/uboot-utils/releases/download/0.1/mips32.tar.gz
    modem: tftp -g -r flashwrite 172.16.1.1
    modem: tftp -g -r fw_setenv 172.16.1.1
    modem: tftp -g -r fw.conf 172.16.1.1
    modem: ln -s fw_setenv fw_printenv
    modem: chmod +x *
    modem: ./fw_setenv disable_recovery y
    modem: ./fw_setenv kernel_addr 0xb0010000
    modem: ./flashwrite /dev/mtd/1 uImage 0
    
    Installation via serial line at uboot:
    uboot: # erase everything exept bootloader
    uboot: protect on b0000000 +10000; protect on b03f0000 +10000
    uboot: erase all
    uboot: # get new firmware via tftp:
    uboot: tftpboot 0x80100000 uImage; setenv kernel_addr 0xb0010000
    uboot: # copy to flash:
    uboot: cp.b 0x80100000 $(kernel_addr) $(filesize)
    uboot: # disable proprietary image checking:
    uboot: setenv disable_recovery=y; saveenv
    uboot: # reboot with LEDE ;)
    uboot: reset
    
    Ethernet works as expected, DSL syncronization does not work properly
    currently, I am working on this issue.
    
    Signed-off-by: Tino Reichardt <milky-lede at mcmilk.de>
---
 target/linux/lantiq/base-files/etc/board.d/01_leds |   3 +
 .../linux/lantiq/base-files/etc/board.d/02_network |   7 ++
 target/linux/lantiq/dts/ALL0333CJ.dts              | 119 +++++++++++++++++++++
 target/linux/lantiq/image/Makefile                 |  10 ++
 4 files changed, 139 insertions(+)

diff --git a/target/linux/lantiq/base-files/etc/board.d/01_leds b/target/linux/lantiq/base-files/etc/board.d/01_leds
index 8de222a..b6461f9 100755
--- a/target/linux/lantiq/base-files/etc/board.d/01_leds
+++ b/target/linux/lantiq/base-files/etc/board.d/01_leds
@@ -35,6 +35,9 @@ led_internet="$(lantiq_get_dt_led internet)"
 board=$(board_name)
 
 case "$board" in
+ALL0333CJ)
+	ucidef_set_led_netdev "lan" "lan" "all0333cj:green:lan" "eth0.1"
+	;;
 ARV4525PW)
 	ucidef_set_led_netdev "wifi" "wifi" "arv4525pw:green:wlan" "wlan0"
 	;;
diff --git a/target/linux/lantiq/base-files/etc/board.d/02_network b/target/linux/lantiq/base-files/etc/board.d/02_network
index f63be9e..55498b9 100755
--- a/target/linux/lantiq/base-files/etc/board.d/02_network
+++ b/target/linux/lantiq/base-files/etc/board.d/02_network
@@ -26,6 +26,13 @@ ACMP252|GIGASX76X)
 		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t at eth0"
 	;;
 
+ALL0333CJ)
+	annex="b"
+	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
+	wan_mac=$(macaddr_add "$lan_mac" 1)
+	ucidef_set_interface_lan 'eth0'
+	;;
+
 ARV4510PW)
 	lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
 	wan_mac=$(macaddr_add "$lan_mac" 1)
diff --git a/target/linux/lantiq/dts/ALL0333CJ.dts b/target/linux/lantiq/dts/ALL0333CJ.dts
new file mode 100644
index 0000000..99174c5
--- /dev/null
+++ b/target/linux/lantiq/dts/ALL0333CJ.dts
@@ -0,0 +1,119 @@
+/dts-v1/;
+
+#include "amazonse.dtsi"
+
+/ {
+	model = "ALL0333CJ - Allnet ALL0333CJ DSL Modem";
+
+	chosen {
+		bootargs = "console=ttyLTQ0,115200";
+
+		aliases {
+			led-boot = &power;
+			led-failsafe = &power;
+			led-running = &power;
+
+			led-dsl = &dsl;
+			led-internet = &online_green;
+		};
+
+	};
+
+	memory at 0 {
+		reg = <0x0 0x1000000>;
+	};
+
+	fpi at b0000000 {
+		etop at E180000 {
+			phy-mode = "mii";
+		};
+	};
+
+	fpi at 10000000 {
+		gpio: pinmux at E100B10 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&state_default>;
+
+			state_default: pinmux {
+				asc {
+					lantiq,groups = "asc";
+					lantiq,function = "asc";
+				};
+				keys_in {
+					lantiq,pins = "io0",/* "io25", */"io29";
+					lantiq,pull = <2>;
+					lantiq,open-drain = <1>;
+				};
+			};
+		};
+
+		localbus at 0 {
+			nor-boot at 0 {
+				compatible = "lantiq,nor";
+				bank-width = <2>;
+				reg = <0 0x0 0x400000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition at 0 {
+						label = "uboot";
+						reg = <0x00000 0x10000>;
+						read-only;
+					};
+
+					partition at 10000 {
+						label = "firmware";
+						reg = <0x10000 0x3ef200>;
+					};
+
+					partition at 3ff200 {
+						label = "uboot_env";
+						reg = <0x3ff200 0xc00>;
+						read-only;
+					};
+
+					partition at 3ffe00 {
+						label = "dummy_bits";
+						reg = <0x3ffe00 0x200>;
+						read-only;
+					};
+				};
+			};
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		/* power led: red=off, green=on */
+		power: power {
+			label = "all0333cj:green:power";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+		lan: lan {
+			label = "all0333cj:green:lan";
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+		};
+
+		dsl: dsl {
+			label = "all0333cj:green:dsl";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		online_green: online {
+			label = "all0333cj:green:online";
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+		online_red {
+			label = "all0333cj:red:online";
+			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile
index 572c9b3..1b194b3 100644
--- a/target/linux/lantiq/image/Makefile
+++ b/target/linux/lantiq/image/Makefile
@@ -108,6 +108,16 @@ endef
 
 ifeq ($(SUBTARGET),ase)
 
+define Device/ALL0333CJ
+  IMAGE_SIZE := 3700k
+  DEVICE_DTS := ALL0333CJ
+  DEVICE_TITLE := Allnet ALL0333CJ
+  DEVICE_PACKAGES := kmod-ltq-adsl-ase kmod-ltq-adsl-ase-mei \
+	kmod-ltq-adsl-ase-fw-b kmod-ltq-atm-ase \
+	ltq-adsl-app ppp-mod-pppoe
+endef
+TARGET_DEVICES += ALL0333CJ
+
 define Device/DGN1000B
   IMAGE_SIZE := 6000k
   DEVICE_DTS := DGN1000B



More information about the lede-commits mailing list