January 2018 Archives by thread
Starting: Mon Jan 1 00:34:07 PST 2018
Ending: Wed Jan 31 03:13:28 PST 2018
Messages: 303
- Mails lost towards barebox mailing list [Was: [PATCH v4 0/25] at91: move ...]
Sam Ravnborg
- [PATCH 1/4] arm: at91: move irq_fixup to header file
Sam Ravnborg
- [PATCH 2/4] arm: at91: simplify soc setup
Sam Ravnborg
- [PATCH 3/4] at91sam9263ek: enable multi-image build
Sam Ravnborg
- [PATCH 4/4] at91sam9263ek: enable DT support
Sam Ravnborg
- [PATCH 02/25] arm: at91: drop unused at91sam9x5_lowlevel_init.c
Sam Ravnborg
- [PATCH 03/25] arm: at91: add at91sam926x_board_init.h
Sam Ravnborg
- [PATCH 04/25] arm: at91: code cleanup in at91sam926x_board_init
Sam Ravnborg
- [PATCH 05/25] at91sam9263ek: move reset vector to board code
Sam Ravnborg
- [PATCH 06/25] at91sam9261ek, at91sam9g10ek: move reset vector to board code
Sam Ravnborg
- [PATCH 07/25] pm9261: move reset vector to board code
Sam Ravnborg
- [PATCH 08/25] at91: drop unused at91sam9261_lowlevel_init
Sam Ravnborg
- [PATCH 09/25] pm9263: move reset vector to board code
Sam Ravnborg
- [PATCH 11/25] mmccpu: delete unused lowlevel_init
Sam Ravnborg
- [PATCH 12/25] mmccpu: move reset vector to board code
Sam Ravnborg
- [PATCH 13/25] tny-a926x: delete unused tny_a9263_lowlevel_init.c
Sam Ravnborg
- [PATCH 17/25] sama5d{3, 4}{xek, xplained}: move reset vector to board code
Sam Ravnborg
- [PATCH 18/25] at91sam9n12ek: move reset vector to board code
Sam Ravnborg
- [PATCH 19/25] at91sam9260ek, at91sam9g20ek: move reset vector to board code
Sam Ravnborg
- [PATCH 20/25] at91sam9m10g45ek, at91sam9m10ihd, pm9g45: move reset vector to board code
Sam Ravnborg
- [PATCH 21/25] animeo: move reset vector to board code
Sam Ravnborg
- [PATCH 22/25] telit-evk-pro3: move reset vector to board code
Sam Ravnborg
- [PATCH 23/25] dss11: move reset vector to board code
Sam Ravnborg
- [PATCH 24/25] at91rm9200ek: move reset vector to board code
Sam Ravnborg
- [PATCH 25/25] arm: at91: remove leftovers from moving reset code in mach-at91
Sam Ravnborg
- [PATCH 01/25] arm: at91: refactor lowlevel_init selection
Sam Ravnborg
- [PATCH 10/25] usb-a926x: move reset vector to board code
Sam Ravnborg
- [PATCH 14/25] tny-a926x: move reset vector to board code
Sam Ravnborg
- [PATCH 15/25] qil-a926x: move reset vector to board code
Sam Ravnborg
- [PATCH 16/25] haba-knx: move reset vector to board code
Sam Ravnborg
- [RFC PATCH] pwm: add pwm-atmel from Linux kernel 4.14
Sam Ravnborg
- [PATCH v2 0/4] Enable DT support for AT91SAM9263EK
Andrey Smirnov
- [PATCH v4 0/25] at91: move reset vector to board code
Andrey Smirnov
- [PATCH 4/4] build: fix that LZO file is always rebuilt
Sascha Hauer
- command: hashsum: md5sum reports wrong sum for the file named 4k.bin
Sascha Hauer
- [PATCH] string.h: Implement strndup
Sascha Hauer
- [PATCH] linux/kernel.h: move ALIGN_DOWN() to include/linux/kernel.h
Sascha Hauer
- [PATCH] ARM: boards: phytec-som-am335x: Revert unified MLO for 1GB
Sascha Hauer
- [PATCH] net: make struct bootp __packed to prevent unaligned store on MIPS
Sascha Hauer
- [PATCH v5 0/22] at91: move reset vector to board code
Sam Ravnborg
- [PATCH] atmel_lcdfb: introduce driver data
Sam Ravnborg
- [PATCH] ARM: i.MX6: add new silicon revision number 1.6
Christoph Fritz
- [PATCH] i2c: designware: evaluate i2c-sda-hold-time property
Steffen Trumtrar
- [PATCH 1/4] net: designware: move probe to generic driver
Steffen Trumtrar
- [PATCH 2/4] net: add SoCFPGA-specific designware driver
Steffen Trumtrar
- [PATCH 3/4] ARM: SoCFPGA: remove emac init code
Steffen Trumtrar
- [PATCH 4/4] net: designware: add warning for drvdata
Steffen Trumtrar
- [PATCH 1/2] ARM: socfpga: get rid of clock-frequency assignments
Steffen Trumtrar
- [PATCH] reset: reset-socfpga: sync driver with linux
Steffen Trumtrar
- [PATCH] Kconfig: drop unused HAS_POWEROFF
Antony Pavlov
- [PATCH] device parameters: Allow dots in device names for setenv aswell
Sascha Hauer
- [PATCH 1/2] i.MX: Fix MX7_UART2_BASE_ADDR
Andrey Smirnov
- [PATCH 2/2] i.MX7: Add CCM definitions for UART2
Andrey Smirnov
- [PATCH] i.MX: ecspi: Enable imx->clk as a part of initialization
Andrey Smirnov
- [PATCH] i.MX: Select DRIVER_SPI_IMX_2_3 for i.MX7
Andrey Smirnov
- [PATCH] Revert "mci: imx-esdhc: Enable clock"
Andrey Smirnov
- [PATCH] ubiformat: Lower message printing frequency
Sascha Hauer
- [PATCH] usbgadget: Update command help text
Sascha Hauer
- fastboot sparse support
Sascha Hauer
- [PATCH] net/e1000: fix driver probing in the presence of two e1000 devices
Uwe Kleine-König
- Barebox device tree overlay support
Dgien, David [US] (MS)
- [PATCH v2 0/7] sandbox: add gpio support with libftdi1
Antony Pavlov
- [PATCH v2 1/7] sandbox: avoid symbol conflict for {open, read, close}dir
Antony Pavlov
- [PATCH 1/2] common: state: Add property to protect existing data
Daniel Schultz
- [PATCH v3 0/3] Enable DT support for AT91SAM9263EK
Sam Ravnborg
- [PATCH] of: base: use root_node compatible as suggestion for a hostname
Sascha Hauer
- [PATCH] FIT: Fix error path
Sascha Hauer
- [PATCH] partitions: dos: Treat all extended partition types equally
Andrey Smirnov
- [PATCH] FIT: export fit_open_configuration() and fit_open_image()
Sascha Hauer
- [PATCH] blspec: fix crash when trying to boot from loop mounts
Philipp Zabel
- [PATCH] state: Documentation: fix typo
Ulrich Ölmann
- [PATCH 1/2] mci: drop unused parameter from mci_switch()
Uwe Kleine-König
- [PATCH] Documentation: Bootchooser: fix typo
Bastian Stender
- [PATCH v2 1/2] mci: drop unused parameter from mci_switch()
Uwe Kleine-König
- [PATCH] commands/Kconfig: Fix tpyo
Uwe Kleine-König
- [PATCH v2] state: Documentation: fix typo
Ulrich Ölmann
- v2018.01.0
Sascha Hauer
- [PATCH v3 0/3] sandbox: add gpio support with libftdi1
Antony Pavlov
- [PATCH v3 1/3] sandbox: avoid symbol conflict for {open, read, close}dir
Antony Pavlov
- [PATCH] sandbox: use 'poweroff' command for exit
Antony Pavlov
- [PATCH] i2c: read/write_reg: don't assume client->dev to be valid
Uwe Kleine-König
- [PATCH] at91sam9x5ek: Add appropriate compatibility guards to all initcalls
Andrey Smirnov
- [PATCH] net/e1000: init eeprom word size if only iNVM is found
Lucas Stach
- [PATCH v2] net: phy: scan PHYs referenced by phandle
Lucas Stach
- [PATCH 0/7] Make TFTP detection more convenient
Sascha Hauer
- [PATCH 1/7] startup: create /tmp
Sascha Hauer
- [PATCH 5/7] uimage: Use is_tftp_fs() and cache_file() to ease TFTP workaround
Sascha Hauer
- [PATCH 6/7] fs/uimagefs: Use is_tftp_fs() and cache_file() to ease TFTP workaround
Sascha Hauer
- [PATCH 7/7] fs: remove now unused function can_lseek_backward()
Sascha Hauer
- [PATCH] commands/Kconfig: fix copy'n'paste error in CMD_GPIO help
Ulrich Ölmann
- [PATCH 1/3] net/e1000: use correct bit to check for flash presence
Lucas Stach
- [PATCH 2/3] net/e1000: mark EEPROM as invalid if external flash is absent
Lucas Stach
- [PATCH 3/3] net/e1000: don't check EEPROM signature if populated from iNVM
Lucas Stach
- [PATCH v2 0/8] Make TFTP detection more convenient
Sascha Hauer
- [PATCH v3 1/5] net/e1000: remove one level of indentation
Lucas Stach
- [PATCH v3 2/5] net/e1000: use correct bit for flash detection
Lucas Stach
- [PATCH v3 4/5] net/e1000: don't check EEPROM signature if populated from iNVM
Lucas Stach
- [PATCH 0/2] Make finding fixup nodes more robust
Sascha Hauer
- [PATCH 1/2] of: Add function to find the same node in another tree
Sascha Hauer
- [PATCH 2/2] of: mtd: partition: Use reproducible node names for fixup
Sascha Hauer
- [PATCH] fs: Fix memory leak in mount()
Sascha Hauer
- [PATCH] bootargs: Fix memory leak in linux_bootargs_get()
Sascha Hauer
- [PATCH] bbremote: rename command subparser variables
Aleksander Morgado
- [PATCH] of: base: fix segfault in of_get_machine_compatible()
Aleksander Morgado
- [PATCH] ratp: rename global context variable
Aleksander Morgado
- [PATCH] ratp: move barebox-specific command to ratp_bb.h
Aleksander Morgado
- [PATCH] ratp: remove unused list pointer from ratp_bb_pkt
Aleksander Morgado
- [PATCH 1/3] commands: ubi: ubiupdatevol: Reduce error code to 0 or 1
Daniel Schultz
- [PATCH] ratp: remove unused context fields
Aleksander Morgado
- [PATCH 00/10] HYP mode handling and RasPi 3 support
Lucas Stach
- [PATCH 10/10] ARM: rpi: autosize malloc area
Lucas Stach
- [PATCH] imd: Make all pointers into image const
Sascha Hauer
- [PATCH 0/6] bbu: Make image pointer const
Sascha Hauer
- [PATCH 1/6] bbu: imx-bbu-internal: Do not modify image
Sascha Hauer
- [PATCH 2/6] bbu: imx-bbu-internal: make pointers to image const
Sascha Hauer
- [PATCH 4/6] bbu: Make pointer to image const
Sascha Hauer
- [PATCH 6/6] ARM: am33xx: bbu: Make pointers to image const
Sascha Hauer
- [PATCH] rsa: Add missing newline to pr_err messages
Sascha Hauer
- [PATCH] doc: bcm283x: update documentation for Raspberry Pi
Roland Hieber
- [PATCH 1/2] net: designware: add missing headers
Lucas Stach
- [PATCH 2/2] reset: add missing stub for reset_control_get
Lucas Stach
- [PATCH] net: phy: ar8327: fix ar8327n_reg_read
Oleksij Rempel
- [PATCH] libfile: Make write_file buffer const
Sascha Hauer
- [PATCH 0/3] of: Allow for const properties
Sascha Hauer
- [PATCH 1/3] pinctrl: do not dereference a device tree property directly
Sascha Hauer
- [PATCH 2/3] of: Allow for const properties
Sascha Hauer
- [PATCH 3/3] of: fdt: add of_unflatten_dtb_const
Sascha Hauer
- [PATCH 0/8] FIT: Add support for opening images without a /configuration/
Sascha Hauer
- [PATCH 1/8] bootm: FIT: do not depend on FIT pre-opened images
Sascha Hauer
- [PATCH 2/8] FIT: Do not pre-open images
Sascha Hauer
- [PATCH 3/8] FIT: Let user specify the configuration to use
Sascha Hauer
- [PATCH 5/8] FIT: move handle->verify check to fit_verify_hash()
Sascha Hauer
- [PATCH 6/8] FIT: factor out some helper functions
Sascha Hauer
- [PATCH] FIT: Use const dtb unflatten variant
Sascha Hauer
Last message date:
Wed Jan 31 03:13:28 PST 2018
Archived on: Wed Jan 31 03:13:47 PST 2018
This archive was generated by
Pipermail 0.09 (Mailman edition).