January 2018 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Mon Jan 1 00:34:07 PST 2018
Ending: Wed Jan 31 03:13:28 PST 2018
Messages: 303

• Mails lost towards barebox mailing list [Was: [PATCH v4 0/25] at91: move ...]   Sam Ravnborg
• [PATCH 1/4] arm: at91: move irq_fixup to header file   Sam Ravnborg
• [PATCH 2/4] arm: at91: simplify soc setup   Sam Ravnborg
• [PATCH 3/4] at91sam9263ek: enable multi-image build   Sam Ravnborg
• [PATCH 4/4] at91sam9263ek: enable DT support   Sam Ravnborg
• [PATCH 02/25] arm: at91: drop unused at91sam9x5_lowlevel_init.c   Sam Ravnborg
• [PATCH 03/25] arm: at91: add at91sam926x_board_init.h   Sam Ravnborg
• [PATCH 04/25] arm: at91: code cleanup in at91sam926x_board_init   Sam Ravnborg
• [PATCH 05/25] at91sam9263ek: move reset vector to board code   Sam Ravnborg
• [PATCH 06/25] at91sam9261ek, at91sam9g10ek: move reset vector to board code   Sam Ravnborg
• [PATCH 07/25] pm9261: move reset vector to board code   Sam Ravnborg
• [PATCH 08/25] at91: drop unused at91sam9261_lowlevel_init   Sam Ravnborg
• [PATCH 09/25] pm9263: move reset vector to board code   Sam Ravnborg
• [PATCH 11/25] mmccpu: delete unused lowlevel_init   Sam Ravnborg
• [PATCH 12/25] mmccpu: move reset vector to board code   Sam Ravnborg
• [PATCH 13/25] tny-a926x: delete unused tny_a9263_lowlevel_init.c   Sam Ravnborg
• [PATCH 17/25] sama5d{3, 4}{xek, xplained}: move reset vector to board code   Sam Ravnborg
• [PATCH 18/25] at91sam9n12ek: move reset vector to board code   Sam Ravnborg
• [PATCH 19/25] at91sam9260ek, at91sam9g20ek: move reset vector to board code   Sam Ravnborg
• [PATCH 20/25] at91sam9m10g45ek, at91sam9m10ihd, pm9g45: move reset vector to board code   Sam Ravnborg
• [PATCH 21/25] animeo: move reset vector to board code   Sam Ravnborg
• [PATCH 22/25] telit-evk-pro3: move reset vector to board code   Sam Ravnborg
• [PATCH 23/25] dss11: move reset vector to board code   Sam Ravnborg
• [PATCH 24/25] at91rm9200ek: move reset vector to board code   Sam Ravnborg
• [PATCH 25/25] arm: at91: remove leftovers from moving reset code in mach-at91   Sam Ravnborg
• [PATCH 01/25] arm: at91: refactor lowlevel_init selection   Sam Ravnborg
• [PATCH 10/25] usb-a926x: move reset vector to board code   Sam Ravnborg
• [PATCH 14/25] tny-a926x: move reset vector to board code   Sam Ravnborg
• [PATCH 15/25] qil-a926x: move reset vector to board code   Sam Ravnborg
• [PATCH 16/25] haba-knx: move reset vector to board code   Sam Ravnborg
• Mails lost towards barebox mailing list [Was: [PATCH v4 0/25] at91: move ...]   Sam Ravnborg
• [RFC PATCH] pwm: add pwm-atmel from Linux kernel 4.14   Sam Ravnborg
• Mails lost towards barebox mailing list [Was: [PATCH v4 0/25] at91: move ...]   Sam Ravnborg
• [PATCH v2 0/4] Enable DT support for AT91SAM9263EK   Andrey Smirnov
• [PATCH v4 0/25] at91: move reset vector to board code   Andrey Smirnov
• [PATCH v2 0/4] Enable DT support for AT91SAM9263EK   Sam Ravnborg
• [PATCH 11/25] mmccpu: delete unused lowlevel_init   Sascha Hauer
• [PATCH 01/25] arm: at91: refactor lowlevel_init selection   Sascha Hauer
• [PATCH 17/25] sama5d{3, 4}{xek, xplained}: move reset vector to board code   Sascha Hauer
• [PATCH 4/4] build: fix that LZO file is always rebuilt   Sascha Hauer
• [RFC PATCH] pwm: add pwm-atmel from Linux kernel 4.14   Sascha Hauer
• command: hashsum: md5sum reports wrong sum for the file named 4k.bin   Sascha Hauer
• [PATCH] string.h: Implement strndup   Sascha Hauer
• [PATCH] linux/kernel.h: move ALIGN_DOWN() to include/linux/kernel.h   Sascha Hauer
• [PATCH] ARM: boards: phytec-som-am335x: Revert unified MLO for 1GB   Sascha Hauer
• [PATCH] net: make struct bootp __packed to prevent unaligned store on MIPS   Sascha Hauer
• [PATCH 4/4] build: fix that LZO file is always rebuilt   Sascha Hauer
• command: hashsum: md5sum reports wrong sum for the file named 4k.bin   Peter Mamonov
• [RFC PATCH] pwm: add pwm-atmel from Linux kernel 4.14   Sam Ravnborg
• [PATCH 4/4] build: fix that LZO file is always rebuilt   Sam Ravnborg
• [PATCH 11/25] mmccpu: delete unused lowlevel_init   Sam Ravnborg
• [PATCH 17/25] sama5d{3, 4}{xek, xplained}: move reset vector to board code   Sam Ravnborg
• [PATCH v5 0/22] at91: move reset vector to board code   Sam Ravnborg
• [PATCH v5 01/22] at91: mmccpu: remove board support for mmccpu   Sam Ravnborg
• [PATCH v5 02/22] arm: at91: refactor lowlevel_init selection   Sam Ravnborg
• [PATCH v5 03/22] arm: at91: drop unused at91sam9x5_lowlevel_init.c   Sam Ravnborg
• [PATCH v5 04/22] arm: at91: add at91sam926x_board_init.h   Sam Ravnborg
• [PATCH v5 05/22] arm: at91: code cleanup in at91sam926x_board_init   Sam Ravnborg
• [PATCH v5 06/22] at91sam9263ek: move reset vector to board code   Sam Ravnborg
• [PATCH v5 07/22] at91sam9261ek, at91sam9g10ek: move reset vector to board code   Sam Ravnborg
• [PATCH v5 08/22] pm9261: move reset vector to board code   Sam Ravnborg
• [PATCH v5 09/22] at91: drop unused at91sam9261_lowlevel_init   Sam Ravnborg
• [PATCH v5 10/22] pm9263: move reset vector to board code   Sam Ravnborg
• [PATCH v5 11/22] {usb,tny}-a926x: move reset vector to board code   Sam Ravnborg
• [PATCH v5 12/22] qil-a926x: move reset vector to board code   Sam Ravnborg
• [PATCH v5 13/22] haba-knx: move reset vector to board code   Sam Ravnborg
• [PATCH v5 14/22] sama5d{3, 4}{xek, xplained}: move reset vector to board code   Sam Ravnborg
• [PATCH v5 15/22] at91sam9n12ek: move reset vector to board code   Sam Ravnborg
• [PATCH v5 16/22] at91sam9260ek, at91sam9g20ek: move reset vector to board code   Sam Ravnborg
• [PATCH v5 17/22] at91sam9m10g45ek, at91sam9m10ihd, pm9g45: move reset vector to board code   Sam Ravnborg
• [PATCH v5 18/22] animeo: move reset vector to board code   Sam Ravnborg
• [PATCH v5 19/22] telit-evk-pro3: move reset vector to board code   Sam Ravnborg
• [PATCH v5 20/22] dss11: move reset vector to board code   Sam Ravnborg
• [PATCH v5 21/22] at91rm9200ek: move reset vector to board code   Sam Ravnborg
• [PATCH v5 22/22] arm: at91: remove leftovers from moving reset code in mach-at91   Sam Ravnborg
• [PATCH] atmel_lcdfb: introduce driver data   Sam Ravnborg
• [PATCH 4/4] at91sam9263ek: enable DT support   Sam Ravnborg
• [PATCH v5 0/22] at91: move reset vector to board code   Sascha Hauer
• [PATCH] atmel_lcdfb: introduce driver data   Sascha Hauer
• command: hashsum: md5sum reports wrong sum for the file named 4k.bin   Sascha Hauer
• [PATCH] ARM: i.MX6: add new silicon revision number 1.6   Christoph Fritz
• [PATCH] lib: parse_area_spec: don't modify *start and *size values if parse failed   Peter Mamonov
• [PATCH] i2c: designware: evaluate i2c-sda-hold-time property   Steffen Trumtrar
• [PATCH 1/4] net: designware: move probe to generic driver   Steffen Trumtrar
• [PATCH 2/4] net: add SoCFPGA-specific designware driver   Steffen Trumtrar
• [PATCH 3/4] ARM: SoCFPGA: remove emac init code   Steffen Trumtrar
• [PATCH 4/4] net: designware: add warning for drvdata   Steffen Trumtrar
• [PATCH 1/2] ARM: socfpga: get rid of clock-frequency assignments   Steffen Trumtrar
• [PATCH 2/2] ARM: socfpga: move environment from dtsi to board dts   Steffen Trumtrar
• [PATCH] reset: reset-socfpga: sync driver with linux   Steffen Trumtrar
• [PATCH] Kconfig: drop unused HAS_POWEROFF   Antony Pavlov
• [PATCH] device parameters: Allow dots in device names for setenv aswell   Sascha Hauer
• [PATCH 1/2] i.MX: Fix MX7_UART2_BASE_ADDR   Andrey Smirnov
• [PATCH 2/2] i.MX7: Add CCM definitions for UART2   Andrey Smirnov
• [PATCH] i.MX: ecspi: Enable imx->clk as a part of initialization   Andrey Smirnov
• [PATCH] i.MX: Select DRIVER_SPI_IMX_2_3 for i.MX7   Andrey Smirnov
• [PATCH] Revert "mci: imx-esdhc: Enable clock"   Andrey Smirnov
• [PATCH] ubiformat: Lower message printing frequency   Sascha Hauer
• [PATCH] usbgadget: Update command help text   Sascha Hauer
• fastboot sparse support   Sascha Hauer
• [PATCH 1/7] fs: implement ftruncate   Sascha Hauer
• [PATCH 2/7] ubiformat: Add ubiformat write function   Sascha Hauer
• [PATCH 3/7] Documentation: USB gadget: Add section for partition description   Sascha Hauer
• [PATCH 4/7] filetype: Add fastboot sparse format detection   Sascha Hauer
• [PATCH 5/7] Add support for fastboot sparse images   Sascha Hauer
• [PATCH 6/7] file_list: Add ubi flag   Sascha Hauer
• [PATCH 7/7] usb: gadget: fastboot: Add sparse image support   Sascha Hauer
• [PATCH] ARM: i.MX6: add new silicon revision number 1.6   Sascha Hauer
• [PATCH] lib: parse_area_spec: don't modify *start and *size values if parse failed   Sascha Hauer
• [PATCH] i2c: designware: evaluate i2c-sda-hold-time property   Sascha Hauer
• [PATCH 1/4] net: designware: move probe to generic driver   Sascha Hauer
• [PATCH 1/2] ARM: socfpga: get rid of clock-frequency assignments   Sascha Hauer
• [PATCH] reset: reset-socfpga: sync driver with linux   Sascha Hauer
• [PATCH] Kconfig: drop unused HAS_POWEROFF   Sascha Hauer
• [PATCH 1/2] i.MX: Fix MX7_UART2_BASE_ADDR   Sascha Hauer
• [PATCH] i.MX: ecspi: Enable imx->clk as a part of initialization   Sascha Hauer
• [PATCH] i.MX: Select DRIVER_SPI_IMX_2_3 for i.MX7   Sascha Hauer
• [PATCH] Revert "mci: imx-esdhc: Enable clock"   Sascha Hauer
• [PATCH] net/e1000: fix driver probing in the presence of two e1000 devices   Uwe Kleine-König
• Barebox device tree overlay support   Dgien, David [US] (MS)
• [PATCH] lib: parse_area_spec: don't modify *start and *size values if parse failed   Peter Mamonov
• Barebox device tree overlay support   Sascha Hauer
• [PATCH] usb: gadget: fastboot: Add sparse image support   Sascha Hauer
• Barebox device tree overlay support   Maxime Ripard
• Barebox device tree overlay support   Sascha Hauer
• [PATCH] atmel_lcdfb: introduce driver data   Sam Ravnborg
• [PATCH v2 0/7] sandbox: add gpio support with libftdi1   Antony Pavlov
• [PATCH v2 1/7] sandbox: avoid symbol conflict for {open, read, close}dir   Antony Pavlov
• [PATCH v2 2/7] sandbox: add gpio support with libftdi1   Antony Pavlov
• [PATCH v2 3/7] sandbox: add i2c and spi libftdi1 bit-bang example   Antony Pavlov
• [PATCH v2 4/7] move parseopt to lib/   Antony Pavlov
• [PATCH v2 5/7] include/parseopt.h: add guard macro   Antony Pavlov
• [PATCH v2 6/7] parseopt: introduce parseopt_u16() and parseopt_str()   Antony Pavlov
• [PATCH v2 7/7] sandbox: parse libftdi options   Antony Pavlov
• [PATCH v2 1/3] lib: parse_area_spec: don't modify *start value if parse failed   Peter Mamonov
• [PATCH v2 2/3] lib: parse_area_spec: part of the area spec after -/+ should start with a digit   Peter Mamonov
• [PATCH v2 3/3] lib: parse_area_spec: no extra symbols after area spec are allowed except for spaces   Peter Mamonov
• [PATCH 1/2] common: state: Add property to protect existing data   Daniel Schultz
• [PATCH v3 0/3] Enable DT support for AT91SAM9263EK   Sam Ravnborg
• [PATCH v3 1/3] arm: at91: move irq_fixup to header file   Sam Ravnborg
• [PATCH v3 2/3] arm: at91: simplify soc setup   Sam Ravnborg
• [PATCH v3 3/3] at91sam9263ek: enable DT support   Sam Ravnborg
• [PATCH] net/e1000: fix driver probing in the presence of two e1000 devices   Sascha Hauer
• [PATCH] atmel_lcdfb: introduce driver data   Sascha Hauer
• [PATCH v2 1/3] lib: parse_area_spec: don't modify *start value if parse failed   Sascha Hauer
• [PATCH] of: base: use root_node compatible as suggestion for a hostname   Sascha Hauer
• [PATCH 1/2] common: state: Add property to protect existing data   Sascha Hauer
• [PATCH v2 1/3] lib: parse_area_spec: don't modify *start value if parse failed   Peter Mamonov
• [PATCH v2 0/7] sandbox: add gpio support with libftdi1   Sascha Hauer
• [PATCH v2 3/7] sandbox: add i2c and spi libftdi1 bit-bang example   Sascha Hauer
• [PATCH v3 0/3] Enable DT support for AT91SAM9263EK   Sascha Hauer
• [PATCH] FIT: Fix error path   Sascha Hauer
• [PATCH] partitions: dos: Treat all extended partition types equally   Andrey Smirnov
• [PATCH] FIT: export fit_open_configuration() and fit_open_image()   Sascha Hauer
• [PATCH] blspec: fix crash when trying to boot from loop mounts   Philipp Zabel
• [PATCH v2 0/7] sandbox: add gpio support with libftdi1   Antony Pavlov
• [PATCH v2 0/7] sandbox: add gpio support with libftdi1   Sascha Hauer
• [PATCH v2 3/7] sandbox: add i2c and spi libftdi1 bit-bang example   Antony Pavlov
• [PATCH v2 0/7] sandbox: add gpio support with libftdi1   Antony Pavlov
• [PATCH v2 0/7] sandbox: add gpio support with libftdi1   Sascha Hauer
• [PATCH] state: Documentation: fix typo   Ulrich Ölmann
• [PATCH 1/2] mci: drop unused parameter from mci_switch()   Uwe Kleine-König
• [PATCH 2/2] mci: implement command to switch a mmc device to enhanced mode   Uwe Kleine-König
• [PATCH] Documentation: Bootchooser: fix typo   Bastian Stender
• [PATCH v2 0/7] sandbox: add gpio support with libftdi1   Antony Pavlov
• [PATCH 2/2] mci: implement command to switch a mmc device to enhanced mode   Uwe Kleine-König
• [PATCH v2 1/2] mci: drop unused parameter from mci_switch()   Uwe Kleine-König
• [PATCH v2 2/2] mci: implement command to switch a mmc device to enhanced mode   Uwe Kleine-König
• [PATCH] commands/Kconfig: Fix tpyo   Uwe Kleine-König
• [PATCH] state: Documentation: fix typo   Roland Hieber
• [PATCH] partitions: dos: Treat all extended partition types equally   Sascha Hauer
• [PATCH] blspec: fix crash when trying to boot from loop mounts   Sascha Hauer
• [PATCH] Documentation: Bootchooser: fix typo   Sascha Hauer
• [PATCH] state: Documentation: fix typo   Sascha Hauer
• [PATCH] state: Documentation: fix typo   Ulrich Ölmann
• [PATCH v2] state: Documentation: fix typo   Ulrich Ölmann
• [PATCH v2 2/2] mci: implement command to switch a mmc device to enhanced mode   Sascha Hauer
• [PATCH] commands/Kconfig: Fix tpyo   Sascha Hauer
• v2018.01.0   Sascha Hauer
• [PATCH v2 1/2] mci: drop unused parameter from mci_switch()   Sascha Hauer
• [PATCH v3 0/3] sandbox: add gpio support with libftdi1   Antony Pavlov
• [PATCH v3 1/3] sandbox: avoid symbol conflict for {open, read, close}dir   Antony Pavlov
• [PATCH v3 2/3] sandbox: add gpio support with libftdi1   Antony Pavlov
• [PATCH v3 3/3] sandbox: add i2c and spi libftdi1 bit-bang example   Antony Pavlov
• [PATCH] sandbox: use 'poweroff' command for exit   Antony Pavlov
• [PATCH] i2c: read/write_reg: don't assume client->dev to be valid   Uwe Kleine-König
• [PATCH] sandbox: use 'poweroff' command for exit   Sam Ravnborg
• [PATCH] sandbox: use 'poweroff' command for exit   Antony Pavlov
• [PATCH] sandbox: use 'poweroff' command for exit   Sam Ravnborg
• [PATCH] at91sam9x5ek: Add appropriate compatibility guards to all initcalls   Andrey Smirnov
• [PATCH] net/e1000: init eeprom word size if only iNVM is found   Lucas Stach
• [PATCH v2] net: phy: scan PHYs referenced by phandle   Lucas Stach
• [PATCH 0/7] Make TFTP detection more convenient   Sascha Hauer
• [PATCH 1/7] startup: create /tmp   Sascha Hauer
• [PATCH 2/7] fs: implement is_tftp_fs()   Sascha Hauer
• [PATCH 3/7] libfile: implement make_temp   Sascha Hauer
• [PATCH 4/7] libfile: implement a function to cache a file   Sascha Hauer
• [PATCH 5/7] uimage: Use is_tftp_fs() and cache_file() to ease TFTP workaround   Sascha Hauer
• [PATCH 6/7] fs/uimagefs: Use is_tftp_fs() and cache_file() to ease TFTP workaround   Sascha Hauer
• [PATCH 7/7] fs: remove now unused function can_lseek_backward()   Sascha Hauer
• [PATCH] commands/Kconfig: fix copy'n'paste error in CMD_GPIO help   Ulrich Ölmann
• [PATCH v3 0/3] sandbox: add gpio support with libftdi1   Antony Pavlov
• [PATCH] net/e1000: init eeprom word size if only iNVM is found   Lucas Stach
• [PATCH 1/3] net/e1000: use correct bit to check for flash presence   Lucas Stach
• [PATCH 2/3] net/e1000: mark EEPROM as invalid if external flash is absent   Lucas Stach
• [PATCH 3/3] net/e1000: don't check EEPROM signature if populated from iNVM   Lucas Stach
• [PATCH 2/7] fs: implement is_tftp_fs()   Stefan Lengfeld
• [PATCH 4/7] libfile: implement a function to cache a file   Stefan Lengfeld
• [PATCH 5/7] uimage: Use is_tftp_fs() and cache_file() to ease TFTP workaround   Stefan Lengfeld
• [PATCH 6/7] fs/uimagefs: Use is_tftp_fs() and cache_file() to ease TFTP workaround   Stefan Lengfeld
• [PATCH v3 3/3] sandbox: add i2c and spi libftdi1 bit-bang example   Sascha Hauer
• [PATCH] sandbox: use 'poweroff' command for exit   Sascha Hauer
• [PATCH] i2c: read/write_reg: don't assume client->dev to be valid   Sascha Hauer
• [PATCH] at91sam9x5ek: Add appropriate compatibility guards to all initcalls   Sascha Hauer
• [PATCH v2] net: phy: scan PHYs referenced by phandle   Sascha Hauer
• [PATCH] commands/Kconfig: fix copy'n'paste error in CMD_GPIO help   Sascha Hauer
• [PATCH 1/3] net/e1000: use correct bit to check for flash presence   Uwe Kleine-König
• [PATCH v2 0/8] Make TFTP detection more convenient   Sascha Hauer
• [PATCH 1/8] startup: create /tmp   Sascha Hauer
• [PATCH 2/8] fs: implement is_tftp_fs()   Sascha Hauer
• [PATCH 3/8] libfile: implement make_temp   Sascha Hauer
• [PATCH 4/8] libfile: implement a function to cache a file   Sascha Hauer
• [PATCH 5/8] uimage: fix memory leak in error path   Sascha Hauer
• [PATCH 6/8] uimage: Use is_tftp_fs() and cache_file() to ease TFTP workaround   Sascha Hauer
• [PATCH 7/8] fs/uimagefs: Use is_tftp_fs() and cache_file() to ease TFTP workaround   Sascha Hauer
• [PATCH 8/8] fs: remove now unused function can_lseek_backward()   Sascha Hauer
• [PATCH 2/7] fs: implement is_tftp_fs()   Sascha Hauer
• [PATCH v3 3/3] sandbox: add i2c and spi libftdi1 bit-bang example   Antony Pavlov
• [PATCH v3 1/5] net/e1000: remove one level of indentation   Lucas Stach
• [PATCH v3 2/5] net/e1000: use correct bit for flash detection   Lucas Stach
• [PATCH v3 3/5] net/e1000: EEPROM isn't valid if only iNVM is available   Lucas Stach
• [PATCH v3 4/5] net/e1000: don't check EEPROM signature if populated from iNVM   Lucas Stach
• [PATCH v3 5/5] net/e1000: don't register EERPOM device if the content is invalid   Lucas Stach
• [PATCH 0/2] Make finding fixup nodes more robust   Sascha Hauer
• [PATCH 1/2] of: Add function to find the same node in another tree   Sascha Hauer
• [PATCH 2/2] of: mtd: partition: Use reproducible node names for fixup   Sascha Hauer
• [PATCH] fs: Fix memory leak in mount()   Sascha Hauer
• [PATCH 0/2] Make finding fixup nodes more robust   Sam Ravnborg
• [PATCH] bootargs: Fix memory leak in linux_bootargs_get()   Sascha Hauer
• [PATCH] fs: Fix memory leak in mount()   Sam Ravnborg
• [PATCH 0/2] Make finding fixup nodes more robust   Sascha Hauer
• [PATCH] bbremote: rename command subparser variables   Aleksander Morgado
• [PATCH] of: base: fix segfault in of_get_machine_compatible()   Aleksander Morgado
• [PATCH] ratp: rename global context variable   Aleksander Morgado
• [PATCH] ratp: move barebox-specific command to ratp_bb.h   Aleksander Morgado
• [PATCH] ratp: remove unused list pointer from ratp_bb_pkt   Aleksander Morgado
• [PATCH] fs: Fix memory leak in mount()   Sascha Hauer
• [PATCH v3 3/3] sandbox: add i2c and spi libftdi1 bit-bang example   Sascha Hauer
• [PATCH 1/3] commands: ubi: ubiupdatevol: Reduce error code to 0 or 1   Daniel Schultz
• [PATCH 2/3] ARM: configs: am335x_defconfig: Reorder configs   Daniel Schultz
• [PATCH 3/3] drivers: mtd: nand: omap: Return stat value   Daniel Schultz
• [PATCH] ratp: remove unused context fields   Aleksander Morgado
• [PATCH 00/10] HYP mode handling and RasPi 3 support   Lucas Stach
• [PATCH 01/10] ARM: import opcode helpers from Linux kernel   Lucas Stach
• [PATCH 02/10] ARM: safely switch from HYP to SVC mode if required   Lucas Stach
• [PATCH 03/10] ARM: allow secure monitor code to be built without PSCI   Lucas Stach
• [PATCH 04/10] ARM: add file for HYP mode related setup   Lucas Stach
• [PATCH 05/10] ARM: don't try to install secure monitor when entered in HYP mode   Lucas Stach
• [PATCH 06/10] ARM: default to starting kernel in HYP mode when entered in HYP   Lucas Stach
• [PATCH 07/10] ARM: install HYP vectors at PBL and Barebox entry   Lucas Stach
• [PATCH 08/10] ARM: rpi: add revision IDs for Pi 3 Model B and Pi Zero   Lucas Stach
• [PATCH 09/10] ARM: rpi: add raspberry pi 3 support   Lucas Stach
• [PATCH 10/10] ARM: rpi: autosize malloc area   Lucas Stach
• [PATCH] fs: Fix memory leak in mount()   Sam Ravnborg
• [PATCH v3 1/5] net/e1000: remove one level of indentation   Sascha Hauer
• [PATCH] bbremote: rename command subparser variables   Sascha Hauer
• [PATCH] of: base: fix segfault in of_get_machine_compatible()   Sascha Hauer
• [PATCH] ratp: rename global context variable   Sascha Hauer
• [PATCH] ratp: move barebox-specific command to ratp_bb.h   Sascha Hauer
• [PATCH] ratp: remove unused list pointer from ratp_bb_pkt   Sascha Hauer
• [PATCH 1/3] commands: ubi: ubiupdatevol: Reduce error code to 0 or 1   Sascha Hauer
• [PATCH 3/3] drivers: mtd: nand: omap: Return stat value   Sascha Hauer
• [PATCH 1/3] commands: ubi: ubiupdatevol: Reduce error code to 0 or 1   Sascha Hauer
• [PATCH] ratp: remove unused context fields   Sascha Hauer
• [PATCH] imd: Make all pointers into image const   Sascha Hauer
• [PATCH 0/6] bbu: Make image pointer const   Sascha Hauer
• [PATCH 1/6] bbu: imx-bbu-internal: Do not modify image   Sascha Hauer
• [PATCH 2/6] bbu: imx-bbu-internal: make pointers to image const   Sascha Hauer
• [PATCH 3/6] bbu: command: create temporary variable holding the pointer to the image   Sascha Hauer
• [PATCH 4/6] bbu: Make pointer to image const   Sascha Hauer
• [PATCH 5/6] usb: gadget: fastboot: allow data.image to be const   Sascha Hauer
• [PATCH 6/6] ARM: am33xx: bbu: Make pointers to image const   Sascha Hauer
• [PATCH] rsa: Add missing newline to pr_err messages   Sascha Hauer
• [PATCH 00/10] HYP mode handling and RasPi 3 support   Roland Hieber
• [PATCH] doc: bcm283x: update documentation for Raspberry Pi   Roland Hieber
• [PATCH 1/2] net: designware: add missing headers   Lucas Stach
• [PATCH 2/2] reset: add missing stub for reset_control_get   Lucas Stach
• [PATCH] net: phy: ar8327: fix ar8327n_reg_read   Oleksij Rempel
• [PATCH] libfile: Make write_file buffer const   Sascha Hauer
• [PATCH 0/3] of: Allow for const properties   Sascha Hauer
• [PATCH 1/3] pinctrl: do not dereference a device tree property directly   Sascha Hauer
• [PATCH 2/3] of: Allow for const properties   Sascha Hauer
• [PATCH 3/3] of: fdt: add of_unflatten_dtb_const   Sascha Hauer
• [PATCH 0/8] FIT: Add support for opening images without a /configuration/   Sascha Hauer
• [PATCH 1/8] bootm: FIT: do not depend on FIT pre-opened images   Sascha Hauer
• [PATCH 2/8] FIT: Do not pre-open images   Sascha Hauer
• [PATCH 3/8] FIT: Let user specify the configuration to use   Sascha Hauer
• [PATCH 4/8] FIT: store device_nodes in fit_handle   Sascha Hauer
• [PATCH 5/8] FIT: move handle->verify check to fit_verify_hash()   Sascha Hauer
• [PATCH 6/8] FIT: factor out some helper functions   Sascha Hauer
• [PATCH 7/8] FIT: Implement opening images with no configuration   Sascha Hauer
• [PATCH 8/8] FIT: Allow to open buffer as FIT image   Sascha Hauer
• [PATCH] FIT: Use const dtb unflatten variant   Sascha Hauer

Last message date: Wed Jan 31 03:13:28 PST 2018
Archived on: Wed Jan 31 03:13:47 PST 2018

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...