[PATCH 1/2] i.MX: Fix MX7_UART2_BASE_ADDR

[Andrey Smirnov]

Despite what the Reference Manual says, experiment on i.MX7 SabreSD
shows that that UART2's base is located at offset 0x90000. This is
also corroborated by the offset used in dts/src/arm/imx7s.dtsi in
uart2.

Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
---
 arch/arm/mach-imx/include/mach/imx7-regs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/include/mach/imx7-regs.h b/arch/arm/mach-imx/include/mach/imx7-regs.h
index 8774c32d7..8625d0b61 100644
--- a/arch/arm/mach-imx/include/mach/imx7-regs.h
+++ b/arch/arm/mach-imx/include/mach/imx7-regs.h
@@ -78,7 +78,7 @@
 #define MX7_ECSPI2_BASE_ADDR		(MX7_AIPS3_BASE_ADDR + 0x30000)
 #define MX7_ECSPI3_BASE_ADDR		(MX7_AIPS3_BASE_ADDR + 0x40000)
 #define MX7_UART1_BASE_ADDR		(MX7_AIPS3_BASE_ADDR + 0x60000)
-#define MX7_UART2_BASE_ADDR		(MX7_AIPS3_BASE_ADDR + 0x70000)
+#define MX7_UART2_BASE_ADDR		(MX7_AIPS3_BASE_ADDR + 0x90000)
 #define MX7_UART3_BASE_ADDR		(MX7_AIPS3_BASE_ADDR + 0x80000)
 #define MX7_SAI1_BASE_ADDR		(MX7_AIPS3_BASE_ADDR + 0xA0000)
 #define MX7_SAI2_BASE_ADDR		(MX7_AIPS3_BASE_ADDR + 0xB0000)
-- 
2.14.3