[PATCH 1/2] i.MX: Fix MX7_UART2_BASE_ADDR
Sascha Hauer
s.hauer at pengutronix.de
Thu Jan 11 00:43:20 PST 2018
On Wed, Jan 10, 2018 at 08:31:14AM -0800, Andrey Smirnov wrote:
> Despite what the Reference Manual says, experiment on i.MX7 SabreSD
> shows that that UART2's base is located at offset 0x90000. This is
> also corroborated by the offset used in dts/src/arm/imx7s.dtsi in
> uart2.
>
> Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
> ---
> arch/arm/mach-imx/include/mach/imx7-regs.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/mach-imx/include/mach/imx7-regs.h b/arch/arm/mach-imx/include/mach/imx7-regs.h
> index 8774c32d7..8625d0b61 100644
> --- a/arch/arm/mach-imx/include/mach/imx7-regs.h
> +++ b/arch/arm/mach-imx/include/mach/imx7-regs.h
> @@ -78,7 +78,7 @@
> #define MX7_ECSPI2_BASE_ADDR (MX7_AIPS3_BASE_ADDR + 0x30000)
> #define MX7_ECSPI3_BASE_ADDR (MX7_AIPS3_BASE_ADDR + 0x40000)
> #define MX7_UART1_BASE_ADDR (MX7_AIPS3_BASE_ADDR + 0x60000)
> -#define MX7_UART2_BASE_ADDR (MX7_AIPS3_BASE_ADDR + 0x70000)
> +#define MX7_UART2_BASE_ADDR (MX7_AIPS3_BASE_ADDR + 0x90000)
> #define MX7_UART3_BASE_ADDR (MX7_AIPS3_BASE_ADDR + 0x80000)
> #define MX7_SAI1_BASE_ADDR (MX7_AIPS3_BASE_ADDR + 0xA0000)
> #define MX7_SAI2_BASE_ADDR (MX7_AIPS3_BASE_ADDR + 0xB0000)
> --
> 2.14.3
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list