January 2016 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sat Jan 2 02:27:47 PST 2016
Ending: Sun Jan 31 20:36:05 PST 2016
Messages: 359

• [PATCH 2/4] irqchip: bcm2836: Add SMP support for the 2836   Andrea Merello
  • [PATCH 2/4] irqchip: bcm2836: Add SMP support for the 2836   Russell King - ARM Linux
• [PATCH v2 1/3] clk: bcm2835: Add bindings for the auxiliary peripheral clock gates.   Eric Anholt
• usb: dwc2: regression on bcm2835 after commit 09c96980dc72   Stefan Wahren
  • usb: dwc2: regression on bcm2835 after commit 09c96980dc72   Remi Pommarel
  • usb: dwc2: regression on bcm2835 after commit 09c96980dc72   John Youn
    • usb: dwc2: regression on bcm2835 after commit 09c96980dc72   Stefan Wahren
      • usb: dwc2: regression on bcm2835 after commit 09c96980dc72   John Youn
      • usb: dwc2: regression on bcm2835 after commit 09c96980dc72   Stefan Wahren
• [PATCH v2 8/8] ARM: bcm2835: Add Kconfig support for bcm2836   Noralf Trønnes
• Including Raspberry Pi -next trees in linux-next   Stephen Rothwell
  • Including Raspberry Pi -next trees in linux-next   Eric Anholt
    • Including Raspberry Pi -next trees in linux-next   Florian Fainelli
    • Including Raspberry Pi -next trees in linux-next   Stephen Warren
      • Including Raspberry Pi -next trees in linux-next   Arnd Bergmann
      • Including Raspberry Pi -next trees in linux-next   Stephen Rothwell
      • Including Raspberry Pi -next trees in linux-next   Stephen Warren
• [PATCH v6 2/4] spi: bcm2835: add bcm2835 auxiliary spi device driver   Stephan Olbrich
  • [PATCH v6 2/4] spi: bcm2835: add bcm2835 auxiliary spi device driver   Martin Sperl
    • [PATCH v6 2/4] spi: bcm2835: add bcm2835 auxiliary spi device driver   Stephan Olbrich
• [PATCH 00/11] mmc: use sdhci_pltfm_init for private allocation and clean up   Jisheng Zhang
  • [PATCH 02/11] mmc: sdhci-esdhc-imx: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH 03/11] mmc: sdhci-msm: use sdhci_pltfm_init for private allocation   Jisheng Zhang
    • [PATCH 03/11] mmc: sdhci-msm: use sdhci_pltfm_init for private allocation   kbuild test robot
    • [PATCH 03/11] mmc: sdhci-msm: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH 04/11] mmc: sdhci-of-arasan: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH 05/11] mmc: sdhci-of-at91: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH 06/11] mmc: sdhci-of-esdhc: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH 07/11] mmc: sdhci-pxav3: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH 08/11] mmc: sdhci-st: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH 09/11] mmc: sdhci-tegra: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH 10/11] mmc: sdhci-pxav2: remove unnecessary assignment of pltfm_host->priv   Jisheng Zhang
  • [PATCH 11/11] mmc: sdhci-pltfm: remove priv variable from sdhci_pltfm_host   Jisheng Zhang
  • [PATCH 00/11] mmc: use sdhci_pltfm_init for private allocation and clean up   Arnd Bergmann
• [PATCH 01/11] mmc: sdhci-bcm2835: use sdhci_pltfm_init for private allocation   Jisheng Zhang
• [PATCH v2 00/12] mmc: use sdhci_pltfm_init for private allocation and clean up   Jisheng Zhang
  • [PATCH v2 01/12] mmc: sdhci-bcm2835: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v2 02/12] mmc: sdhci-esdhc-imx: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v2 03/12] mmc: sdhci-msm: factorise sdhci_msm_pdata outisde of sdhci_msm_host   Jisheng Zhang
  • [PATCH v2 04/12] mmc: sdhci-msm: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v2 05/12] mmc: sdhci-of-arasan: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v2 06/12] mmc: sdhci-of-at91: use sdhci_pltfm_init for private allocation   Jisheng Zhang
    • [PATCH v2 06/12] mmc: sdhci-of-at91: use sdhci_pltfm_init for private allocation   Ludovic Desroches
      • [PATCH v2 06/12] mmc: sdhci-of-at91: use sdhci_pltfm_init for private allocation   Jisheng Zhang
      • [PATCH v2 06/12] mmc: sdhci-of-at91: use sdhci_pltfm_init for private allocation   Jisheng Zhang
      • [PATCH v2 06/12] mmc: sdhci-of-at91: use sdhci_pltfm_init for private allocation   Ludovic Desroches
  • [PATCH v2 07/12] mmc: sdhci-of-esdhc: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v2 08/12] mmc: sdhci-pxav3: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v2 09/12] mmc: sdhci-st: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v2 10/12] mmc: sdhci-tegra: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v2 11/12] mmc: sdhci-pxav2: remove unnecessary assignment of pltfm_host->priv   Jisheng Zhang
  • [PATCH v2 12/12] mmc: sdhci-pltfm: remove priv variable from sdhci_pltfm_host   Jisheng Zhang
• [PATCH v3 00/12] mmc: use sdhci_pltfm_init for private allocation and clean up   Jisheng Zhang
  • [PATCH v3 01/12] mmc: sdhci-bcm2835: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v3 02/12] mmc: sdhci-esdhc-imx: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v3 03/12] mmc: sdhci-msm: factorise sdhci_msm_pdata outisde of sdhci_msm_host   Jisheng Zhang
  • [PATCH v3 04/12] mmc: sdhci-msm: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v3 05/12] mmc: sdhci-of-arasan: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v3 06/12] mmc: sdhci-of-at91: use sdhci_pltfm_init for private allocation   Jisheng Zhang
    • [PATCH v3 06/12] mmc: sdhci-of-at91: use sdhci_pltfm_init for private allocation   Ludovic Desroches
  • [PATCH v3 07/12] mmc: sdhci-of-esdhc: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v3 08/12] mmc: sdhci-pxav3: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v3 09/12] mmc: sdhci-st: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v3 10/12] mmc: sdhci-tegra: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v3 11/12] mmc: sdhci-pxav2: remove unnecessary assignment of pltfm_host->priv   Jisheng Zhang
  • [PATCH v3 12/12] mmc: sdhci-pltfm: remove priv variable from sdhci_pltfm_host   Jisheng Zhang
  • [PATCH v3 00/12] mmc: use sdhci_pltfm_init for private allocation and clean up   Jisheng Zhang
• [GIT PULL 2/4] BCM2835 drivers changes for 4.5   Arnd Bergmann
• [PATCH V2 0/8] dmaengine: bcm2835: enhancement of driver   kernel at martin.sperl.org
  • [PATCH V2 1/8] dmaengine: bcm2835: set residue_granularity field   kernel at martin.sperl.org
    • [PATCH V2 1/8] dmaengine: bcm2835: set residue_granularity field   Eric Anholt
  • [PATCH V2 2/8] dmaengine: bcm2835: remove unnecessary masking of dma channels   kernel at martin.sperl.org
    • [PATCH V2 2/8] dmaengine: bcm2835: remove unnecessary masking of dma channels   Eric Anholt
  • [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.   kernel at martin.sperl.org
    • [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.   Vinod Koul
      • [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.   Martin Sperl
      • [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.   Vinod Koul
      • [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.   Martin Sperl
      • [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.   Vinod Koul
      • [PATCH V2 3/8] dmaengine: bcm2835: use shared interrupt for channel 11 to 14.   Martin Sperl
  • [PATCH V2 4/8] dmaengine: bcm2835: add additional defines for DMA-registers   kernel at martin.sperl.org
    • [PATCH V2 4/8] dmaengine: bcm2835: add additional defines for DMA-registers   Vinod Koul
  • [PATCH V2 5/8] dmaengine: bcm2835: move cyclic member from bcm2835_chan into bcm2835_desc   kernel at martin.sperl.org
  • [PATCH V2 6/8] dmaengine: bcm2835: move controlblock chain generation into separate method   kernel at martin.sperl.org
    • [PATCH V2 6/8] dmaengine: bcm2835: move controlblock chain generation into separate method   Vinod Koul
      • [PATCH V2 6/8] dmaengine: bcm2835: move controlblock chain generation into separate method   Martin Sperl
  • [PATCH V2 7/8] dmaengine: bcm2835: add slave_sg support to bcm2835-dma   kernel at martin.sperl.org
  • [PATCH V2 8/8] dmaengine: bcm2835: add dma_memcopy support to bcm2835-dma   kernel at martin.sperl.org
• [PATCH v3 0/4] Add PWM clock support for bcm2835   Martin Sperl
  • [PATCH v3 0/4] Add PWM clock support for bcm2835   Martin Sperl
• [PATCH 0/5] ASOC: bcm2835: move bcm2835-i2s to use clock framework   kernel at martin.sperl.org
  • [PATCH 1/5] ASoC: bcm2835: cleanup includes by ordering them alphabetically   kernel at martin.sperl.org
  • [PATCH 2/5] clk: bcm2835: enable management of PCM clock   kernel at martin.sperl.org
  • [PATCH 3/5] ASoC: bcm2835: move to use the clock framework   kernel at martin.sperl.org
  • [PATCH 4/5] ARM: bcm2835: I2S: use new register-range and clock framework   kernel at martin.sperl.org
  • [PATCH 5/5] dt-bindings: bsm2835: fix bindings documentation to use new clock framework   kernel at martin.sperl.org
• [PATCH V2 1/2] dt/bindings: serial: bcm2835: add binding documentation for bcm2835-aux-uart   Arnd Bergmann
  • [PATCH V2 1/2] dt/bindings: serial: bcm2835: add binding documentation for bcm2835-aux-uart   Martin Sperl
  • [PATCH V2 1/2] dt/bindings: serial: bcm2835: add binding documentation for bcm2835-aux-uart   Arnd Bergmann
    • [PATCH V2 1/2] dt/bindings: serial: bcm2835: add binding documentation for bcm2835-aux-uart   Martin Sperl
      • [PATCH V2 1/2] dt/bindings: serial: bcm2835: add binding documentation for bcm2835-aux-uart   Arnd Bergmann
      • [PATCH V2 1/2] dt/bindings: serial: bcm2835: add binding documentation for bcm2835-aux-uart   Eric Anholt
• [PATCH 2/5] clk: bcm2835: enable management of PCM clock   Arnd Bergmann
  • [PATCH 2/5] clk: bcm2835: enable management of PCM clock   Geert Uytterhoeven
    • [PATCH 2/5] clk: bcm2835: enable management of PCM clock   Martin Sperl
    • [PATCH 2/5] clk: bcm2835: enable management of PCM clock   Mark Brown
      • [PATCH 2/5] clk: bcm2835: enable management of PCM clock   Martin Sperl
      • [PATCH 2/5] clk: bcm2835: enable management of PCM clock   Remi Pommarel
      • [PATCH 2/5] clk: bcm2835: enable management of PCM clock   Geert Uytterhoeven
      • [PATCH 2/5] clk: bcm2835: enable management of PCM clock   Martin Sperl
      • [PATCH 2/5] clk: bcm2835: enable management of PCM clock   Geert Uytterhoeven
      • [PATCH 2/5] clk: bcm2835: enable management of PCM clock   Martin Sperl
      • [PATCH 2/5] clk: bcm2835: enable management of PCM clock   Geert Uytterhoeven
      • [PATCH 2/5] clk: bcm2835: enable management of PCM clock   Arnd Bergmann
      • [PATCH 2/5] clk: bcm2835: enable management of PCM clock   Martin Sperl
• [PATCH 5/5] dt-bindings: bsm2835: fix bindings documentation to use new clock framework   Rob Herring
  • [PATCH 5/5] dt-bindings: bsm2835: fix bindings documentation to use new clock framework   Martin Sperl
• [PATCH 1/2] Revert "usb: dwc2: Move reset into dwc2_get_hwparams()"   Stefan Wahren
  • [PATCH 1/2] Revert "usb: dwc2: Move reset into dwc2_get_hwparams()"   John Youn
• [PATCH V2 0/2] serial: bcm2835: add bcm2835 auxiliar uart driver   Stefan Wahren
  • [PATCH V2 0/2] serial: bcm2835: add bcm2835 auxiliar uart driver   kernel at martin.sperl.org
    • [PATCH V2 1/2] dt/bindings: serial: bcm2835: add binding documentation for bcm2835-aux-uart   kernel at martin.sperl.org
    • [PATCH V2 2/2] serial: bcm2835: add driver for bcm2835-aux-uart   kernel at martin.sperl.org
      • [PATCH V2 2/2] serial: bcm2835: add driver for bcm2835-aux-uart   Peter Korsgaard
  • [PATCH V2 0/2] serial: bcm2835: add bcm2835 auxiliar uart driver   Martin Sperl
  • [PATCH V2 0/2] serial: bcm2835: add bcm2835 auxiliar uart driver   Stefan Wahren
• [PATCH v3 1/4] clk: bcm2835: add a round up ability to the clock divisor   Martin Sperl
• [PATCH V2 2/2] serial: bcm2835: add driver for bcm2835-aux-uart   Stefan Wahren
• [PATCH V2 0/4] clk: bcm2835: add additinal clocks and add frac support   kernel at martin.sperl.org
  • [PATCH V2 1/4] clk: bcm2835: avoid the use of BCM2835_CLOCK_COUNT in clk-bcm2835   kernel at martin.sperl.org
    • [PATCH V2 1/4] clk: bcm2835: avoid the use of BCM2835_CLOCK_COUNT in clk-bcm2835   Michael Turquette
      • [PATCH V2 1/4] clk: bcm2835: avoid the use of BCM2835_CLOCK_COUNT in clk-bcm2835   Michael Turquette
      • [PATCH V2 1/4] clk: bcm2835: avoid the use of BCM2835_CLOCK_COUNT in clk-bcm2835   Martin Sperl
      • [PATCH V2 1/4] clk: bcm2835: avoid the use of BCM2835_CLOCK_COUNT in clk-bcm2835   Michael Turquette
      • [PATCH V2 1/4] clk: bcm2835: avoid the use of BCM2835_CLOCK_COUNT in clk-bcm2835   Martin Sperl
  • [PATCH V2 2/4] clk: bcm2835: enable fractional and mash support   kernel at martin.sperl.org
    • [PATCH V2 2/4] clk: bcm2835: enable fractional and mash support   Michael Turquette
  • [PATCH V2 3/4] clk: bcm2835: enable management of PCM clock   kernel at martin.sperl.org
    • [PATCH V2 3/4] clk: bcm2835: enable management of PCM clock   Michael Turquette
  • [PATCH V2 4/4] clk: bcm2835: add missing 22 HW-clocks.   kernel at martin.sperl.org
  • [PATCH V2 0/4] clk: bcm2835: add additinal clocks and add frac support   Arnd Bergmann
• [PATCH v2 0/2] usb: dwc2: Fix regressions on bcm2835   John Youn
  • [PATCH v2 1/2] Revert "usb: dwc2: Move reset into dwc2_get_hwparams()"   John Youn
  • [PATCH v2 2/2] usb: dwc2: Fix probe problem on bcm2835   John Youn
  • [PATCH v2 0/2] usb: dwc2: Fix regressions on bcm2835   Heiko Stuebner
    • [PATCH v2 0/2] usb: dwc2: Fix regressions on bcm2835   Doug Anderson
• [PATCH V2 0/3] ASOC: bcm2835: move bcm2835-i2s to use clock framework   kernel at martin.sperl.org
  • [PATCH V2 1/3] ASoC: bcm2835: move to use the clock framework   kernel at martin.sperl.org
    • [PATCH V2 1/3] ASoC: bcm2835: move to use the clock framework   Eric Anholt
  • [PATCH V2 2/3] ARM: bcm2835: I2S: use new register-range and clock framework   kernel at martin.sperl.org
    • [PATCH V2 2/3] ARM: bcm2835: I2S: use new register-range and clock framework   Stefan Wahren
    • [PATCH V2 2/3] ARM: bcm2835: I2S: use new register-range and clock framework   Martin Sperl
    • [PATCH V2 2/3] ARM: bcm2835: I2S: use new register-range and clock framework   Eric Anholt
  • [PATCH V2 3/3] dt-bindings: bsm2835: fix bindings documentation to use new clock framework   kernel at martin.sperl.org
    • [PATCH V2 3/3] dt-bindings: bsm2835: fix bindings documentation to use new clock framework   Rob Herring
      • [PATCH V2 3/3] dt-bindings: bsm2835: fix bindings documentation to use new clock framework   Martin Sperl
      • [PATCH V2 3/3] dt-bindings: bsm2835: fix bindings documentation to use new clock framework   Eric Anholt
• [PATCH V3 0/6] clk: bcm2835: add additinal clocks and add frac support   kernel at martin.sperl.org
  • [PATCH V3 1/6] clk: bcm2835: the minimum clock divider is 2   kernel at martin.sperl.org
  • [PATCH V3 2/6] clk: bcm2835: clamp clock divider to highest integer only   kernel at martin.sperl.org
  • [PATCH V3 3/6] clk: bcm2835: enable fractional and mash support   kernel at martin.sperl.org
  • [PATCH V3 4/6] clk: bcm2835: remove use of BCM2835_CLOCK_COUNT in driver   kernel at martin.sperl.org
    • [PATCH V3 4/6] clk: bcm2835: remove use of BCM2835_CLOCK_COUNT in driver   Martin Sperl
  • [PATCH V3 5/6] clk: bcm2835: enable management of PCM clock   kernel at martin.sperl.org
  • [PATCH V3 6/6] clk: bcm2835: add missing 22 HW-clocks.   kernel at martin.sperl.org
• [PATCH V4 0/7] clk: bcm2835: add clocks and add MASH support   kernel at martin.sperl.org
  • [PATCH V4 1/7] clk: bcm2835: the minimum clock divider is 2   kernel at martin.sperl.org
  • [PATCH V4 2/7] clk: bcm2835: clamp clock divider to highest integer only   kernel at martin.sperl.org
  • [PATCH V4 3/7] clk: bcm2835: remove use of BCM2835_CLOCK_COUNT in driver   kernel at martin.sperl.org
  • [PATCH V4 4/7] clk: bcm2835: enable management of PCM clock   kernel at martin.sperl.org
  • [PATCH V4 5/7] clk: bcm2835: add missing 22 HW-clocks.   kernel at martin.sperl.org
  • [PATCH V4 6/7] clk: bcm2835: enable fractional and mash support   kernel at martin.sperl.org
  • [PATCH V4 7/7] clk: bcm2835: apply limits on dividers to MASH mode.   kernel at martin.sperl.org
  • [PATCH V4 0/7] clk: bcm2835: add clocks and add MASH support   Martin Sperl
• usb: dwc2: Disconnecting hub from rpi leads to errors   Stefan Wahren
  • usb: dwc2: Disconnecting hub from rpi leads to errors   Stefan Wahren
    • usb: dwc2: Disconnecting hub from rpi leads to errors   Doug Anderson
    • usb: dwc2: Disconnecting hub from rpi leads to errors   Doug Anderson
      • usb: dwc2: Disconnecting hub from rpi leads to errors   Alan Stern
      • usb: dwc2: Disconnecting hub from rpi leads to errors   Stefan Wahren
• [PATCH V3 0/4] serial: bcm2835: add bcm2835 auxiliar uart driver   kernel at martin.sperl.org
  • [PATCH V3 1/4] ARM: bcm2835: follow dt uart node-naming convention   kernel at martin.sperl.org
  • [PATCH V3 2/4] dt/bindings: serial: bcm2835: add binding documentation for bcm2835-aux-uart   kernel at martin.sperl.org
    • [PATCH V3 2/4] dt/bindings: serial: bcm2835: add binding documentation for bcm2835-aux-uart   Rob Herring
    • [PATCH V3 2/4] dt/bindings: serial: bcm2835: add binding documentation for bcm2835-aux-uart   Eric Anholt
  • [PATCH V3 3/4] serial: bcm2835: add driver for bcm2835-aux-uart   kernel at martin.sperl.org
    • [PATCH V3 3/4] serial: bcm2835: add driver for bcm2835-aux-uart   Eric Anholt
  • [PATCH V3 4/4] ARM: bcm2835: add bcm2835-aux-uart support to default DT   kernel at martin.sperl.org
• [PATCH 0/5 RFC] mmc: sdhci-iproc: add bcm2835 support   Stefan Wahren
  • [PATCH 2/5 RFC] mmc: sdhci-iproc: Actually enable the clock   Stefan Wahren
    • [PATCH 2/5 RFC] mmc: sdhci-iproc: Actually enable the clock   Scott Branden
    • [PATCH 2/5 RFC] mmc: sdhci-iproc: Actually enable the clock   Ulf Hansson
      • [PATCH 2/5 RFC] mmc: sdhci-iproc: Actually enable the clock   Stefan Wahren
      • [PATCH 2/5 RFC] mmc: sdhci-iproc: Actually enable the clock   Ulf Hansson
  • [PATCH 3/5 RFC] ARM: bcm283x: specify sdhci quirks in dtsi file   Stefan Wahren
    • [PATCH 3/5 RFC] ARM: bcm283x: specify sdhci quirks in dtsi file   Scott Branden
    • [PATCH 3/5 RFC] ARM: bcm283x: specify sdhci quirks in dtsi file   Stephen Warren
  • [PATCH 4/5 RFC] mmc: sdhci-iproc: add bcm2835 support   Stefan Wahren
    • [PATCH 4/5 RFC] mmc: sdhci-iproc: add bcm2835 support   Scott Branden
      • [PATCH 4/5 RFC] mmc: sdhci-iproc: add bcm2835 support   Stefan Wahren
      • [PATCH 4/5 RFC] mmc: sdhci-iproc: add bcm2835 support   Scott Branden
    • [PATCH 4/5 RFC] mmc: sdhci-iproc: add bcm2835 support   Jaehoon Chung
      • [PATCH 4/5 RFC] mmc: sdhci-iproc: add bcm2835 support   Stefan Wahren
    • [PATCH 4/5 RFC] mmc: sdhci-iproc: add bcm2835 support   Stephen Warren
  • [PATCH 5/5 RFC] DT: sdhci-iproc: add bcm2835 compatible   Stefan Wahren
    • [PATCH 5/5 RFC] DT: sdhci-iproc: add bcm2835 compatible   Scott Branden
    • [PATCH 5/5 RFC] DT: sdhci-iproc: add bcm2835 compatible   Rob Herring
  • [PATCH 0/5 RFC] mmc: sdhci-iproc: add bcm2835 support   Eric Anholt
    • [PATCH 0/5 RFC] mmc: sdhci-iproc: add bcm2835 support   Stefan Wahren
      • [PATCH 0/5 RFC] mmc: sdhci-iproc: add bcm2835 support   Eric Anholt
• [PATCH 1/5 RFC] mmc: sdhci-iproc: Clean up platform allocations if shdci init fails   Stefan Wahren
  • [PATCH 1/5 RFC] mmc: sdhci-iproc: Clean up platform allocations if shdci init fails   Scott Branden
  • [PATCH 1/5 RFC] mmc: sdhci-iproc: Clean up platform allocations if shdci init fails   Ulf Hansson
• [RFC 0/9] Allow modifications of specific clocks via DT and more   kernel at martin.sperl.org
  • [RFC 1/9] clk: bcm2835: add basic device tree support for per clock settings   kernel at martin.sperl.org
  • [RFC 2/9] clk: bcm2835: add support for parent selection in DT   kernel at martin.sperl.org
    • [RFC 2/9] clk: bcm2835: add support for parent selection in DT   Sascha Hauer
  • [RFC 3/9] clk: bcm2835: add ability to control mash level via device-tree   kernel at martin.sperl.org
  • [RFC 4/9] clk: bcm2835: reorganize bcm2835_clock_determine_rate   kernel at martin.sperl.org
  • [RFC 5/9] clk: bcm2835: prefer clocks that use integer dividers   kernel at martin.sperl.org
  • [RFC 6/9] clk: bcm2835: allow to define a minimum fractional divider in DT   kernel at martin.sperl.org
  • [RFC 7/9] clk: bcm2835: allow clock choosing mechanims to be selected in DT   kernel at martin.sperl.org
  • [RFC 8/9] dt-bindings: bcm2835: document optional per clock dt-nodes   kernel at martin.sperl.org
  • [RFC 9/9] clk: bcm2835: expose raw clock-registers via debugfs   kernel at martin.sperl.org
• [PATCH] ARM: bcm2835: dt: Add a fall-back Raspberry Pi tree   Lubomir Rintel
  • [PATCH] ARM: bcm2835: dt: Add a fall-back Raspberry Pi tree   Stephen Warren
    • [PATCH] ARM: bcm2835: dt: Add a fall-back Raspberry Pi tree   Lubomir Rintel
      • [PATCH] ARM: bcm2835: dt: Add a fall-back Raspberry Pi tree   Stephen Warren
• [PATCH] ARM: bcm2835: dt: Add Raspberry Pi Model A   Lubomir Rintel
  • [PATCH] ARM: bcm2835: dt: Add Raspberry Pi Model A   Stephen Warren
• Bug in split transactions on Raspberry Pi   Doug Anderson
  • Bug in split transactions on Raspberry Pi   Alan Stern
    • Bug in split transactions on Raspberry Pi   Peter Stuge
      • Bug in split transactions on Raspberry Pi   Alan Stern
      • Bug in split transactions on Raspberry Pi   Doug Anderson
      • Bug in split transactions on Raspberry Pi   Alan Stern
      • Bug in split transactions on Raspberry Pi   Doug Anderson
      • Bug in split transactions on Raspberry Pi   Alan Stern
    • Bug in split transactions on Raspberry Pi   Doug Anderson
      • Bug in split transactions on Raspberry Pi   Alan Stern
      • Bug in split transactions on Raspberry Pi   Noralf Trønnes
      • Bug in split transactions on Raspberry Pi   Alan Stern
      • Bug in split transactions on Raspberry Pi   Doug Anderson
      • Bug in split transactions on Raspberry Pi   Doug Anderson
      • Bug in split transactions on Raspberry Pi   Alan Stern
      • Bug in split transactions on Raspberry Pi   Doug Anderson
      • Bug in split transactions on Raspberry Pi   Alan Stern
      • Bug in split transactions on Raspberry Pi   Doug Anderson
      • Bug in split transactions on Raspberry Pi   Doug Anderson
      • Bug in split transactions on Raspberry Pi   Alan Stern
      • Bug in split transactions on Raspberry Pi   Doug Anderson
      • Bug in split transactions on Raspberry Pi   Alan Stern
      • Bug in split transactions on Raspberry Pi   Doug Anderson
      • Bug in split transactions on Raspberry Pi   Alan Stern
      • Bug in split transactions on Raspberry Pi   Doug Anderson
  • Bug in split transactions on Raspberry Pi   Stefan Wahren
    • Bug in split transactions on Raspberry Pi   Noralf Trønnes
• [PATCH v4 00/13] mmc: use sdhci_pltfm_init for private allocation and clean up   Jisheng Zhang
  • [PATCH v4 01/13] mmc: sdhci-bcm2835: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v4 02/13] mmc: sdhci-esdhc-imx: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v4 03/13] mmc: sdhci-msm: factorise sdhci_msm_pdata outisde of sdhci_msm_host   Jisheng Zhang
  • [PATCH v4 04/13] mmc: sdhci-msm: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v4 05/13] mmc: sdhci-of-arasan: fix clk issue in sdhci_arasan_remove()   Jisheng Zhang
    • [PATCH v4 05/13] mmc: sdhci-of-arasan: fix clk issue in sdhci_arasan_remove()   Sören Brinkmann
  • [PATCH v4 06/13] mmc: sdhci-of-arasan: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v4 07/13] mmc: sdhci-of-at91: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v4 08/13] mmc: sdhci-of-esdhc: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v4 09/13] mmc: sdhci-pxav3: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v4 10/13] mmc: sdhci-st: use sdhci_pltfm_init for private allocation   Jisheng Zhang
  • [PATCH v4 11/13] mmc: sdhci-tegra: use sdhci_pltfm_init for private allocation   Jisheng Zhang
    • [PATCH v4 11/13] mmc: sdhci-tegra: use sdhci_pltfm_init for private allocation   Thierry Reding
  • [PATCH v4 12/13] mmc: sdhci-pxav2: remove unnecessary assignment of pltfm_host->priv   Jisheng Zhang
  • [PATCH v4 13/13] mmc: sdhci-pltfm: remove priv variable from sdhci_pltfm_host   Jisheng Zhang
• [RFC PATCH 0/21] Totally remove SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk   Shawn Lin
  • [RFC PATCH 0/21] Totally remove SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk   Shawn Lin
    • [RFC PATCH 01/21] mmc: sdhci-pltfm: consolidate parsing path   Shawn Lin
    • [RFC PATCH 02/21] mmc: sdhci-iproc: consolidate parsing path   Shawn Lin
    • [RFC PATCH 03/21] mmc: sdhci-msm: consolidate parsing path   Shawn Lin
    • [RFC PATCH 04/21] mmc: sdhci-of-arasan: consolidate parsing path   Shawn Lin
    • [RFC PATCH 05/21] mmc: sdhci-of-at91: consolidate parsing path   Shawn Lin
    • [RFC PATCH 06/21] mmc: sdhci-of-esdhc: consolidate parsing path   Shawn Lin
    • [RFC PATCH 07/21] mmc: sdhci-pxav3: consolidate parsing path   Shawn Lin
      • [RFC PATCH 07/21] mmc: sdhci-pxav3: consolidate parsing path   Jisheng Zhang
      • [RFC PATCH 07/21] mmc: sdhci-pxav3: consolidate parsing path   Shawn Lin
    • [RFC PATCH 08/21] mmc: sdhci-sirf: check sdhci_get_of_property return value   Shawn Lin
    • [RFC PATCH 09/21] mmc: sdhci_f_sdh30: check sdhci_get_of_property return value   Shawn Lin
    • [RFC PATCH 10/21] mmc: sdhci: remove SDHCI_QUIRK_BROKEN_CARD_DETECTION   Shawn Lin
      • [RFC PATCH 10/21] mmc: sdhci: remove SDHCI_QUIRK_BROKEN_CARD_DETECTION   Haibo Chen
      • [RFC PATCH 10/21] mmc: sdhci: remove SDHCI_QUIRK_BROKEN_CARD_DETECTION   Shawn Lin
    • [RFC PATCH 11/21] mmc: sdhci-acpi: remove SDHCI_QUIRK_BROKEN_CARD_DETECTION   Shawn Lin
    • [RFC PATCH 12/21] mmc: sdhci-bcm-kona: remove SDHCI_QUIRK_BROKEN_CARD_DETECTION   Shawn Lin
    • [RFC PATCH 13/21] mmc: sdhci-bcm2835: remove SDHCI_QUIRK_BROKEN_CARD_DETECTION   Shawn Lin
    • [RFC PATCH 14/21] mmc: sdhci-esdhc-imx: remove SDHCI_QUIRK_BROKEN_CARD_DETECTION   Shawn Lin
      • [RFC PATCH 14/21] mmc: sdhci-esdhc-imx: remove SDHCI_QUIRK_BROKEN_CARD_DETECTION   Haibo Chen
      • [RFC PATCH 14/21] mmc: sdhci-esdhc-imx: remove SDHCI_QUIRK_BROKEN_CARD_DETECTION   Shawn Lin
    • [RFC PATCH 15/21] mmc: sdhci-msm: remove SDHCI_QUIRK_BROKEN_CARD_DETECTION   Shawn Lin
    • [RFC PATCH 16/21] mmc: sdhci-of-esdhc: remove SDHCI_QUIRK_BROKEN_CARD_DETECTION   Shawn Lin
    • [RFC PATCH 17/21] mmc: sdhci-pci-core: remove SDHCI_QUIRK_BROKEN_CARD_DETECTION   Shawn Lin
    • [RFC PATCH 18/21] mmc: sdhci-pltfm: remove SDHCI_QUIRK_BROKEN_CARD_DETECTION   Shawn Lin
    • [RFC PATCH 19/21] mmc: sdhci-pxav2: remove SDHCI_QUIRK_BROKEN_CARD_DETECTION   Shawn Lin
    • [RFC PATCH 20/21] mmc: sdhci-s3c: remove SDHCI_QUIRK_BROKEN_CARD_DETECTION   Shawn Lin
    • [RFC PATCH 21/21] mmc: sdhci.h: remove SDHCI_QUIRK_BROKEN_CARD_DETECTION   Shawn Lin
    • [RFC PATCH 0/21] Totally remove SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk   Adrian Hunter
      • [RFC PATCH 0/21] Totally remove SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk   Russell King - ARM Linux
      • [RFC PATCH 0/21] Totally remove SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk   Ulf Hansson
      • [RFC PATCH 0/21] Totally remove SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk   Shawn Lin
      • [RFC PATCH 0/21] Totally remove SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk   One Thousand Gnomes
      • [RFC PATCH 0/21] Totally remove SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk   Ulf Hansson
      • [RFC PATCH 0/21] Totally remove SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk   One Thousand Gnomes
      • [RFC PATCH 0/21] Totally remove SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk   Adrian Hunter
      • [RFC PATCH 0/21] Totally remove SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk   Ulf Hansson
      • [RFC PATCH 0/21] Totally remove SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk   Russell King - ARM Linux
      • [RFC PATCH 0/21] Totally remove SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk   Adrian Hunter
      • [RFC PATCH 0/21] Totally remove SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk   Russell King - ARM Linux
• [RFC PATCH 01/21] mmc: sdhci-pltfm: consolidate parsing path   Shawn Lin
• [RFC PATCH 02/21] mmc: sdhci-iproc: consolidate parsing path   Shawn Lin
• [RFC PATCH 03/21] mmc: sdhci-msm: consolidate parsing path   Shawn Lin
• Hi Dear,   Mrs. Kumiko Suzuki
• [PATCH 0/3] mmc: sdhci-iproc: add bcm2835 support   Stefan Wahren
  • [PATCH 1/3] mmc: sdhci-iproc: define MMC caps in platform data   Stefan Wahren
  • [PATCH 2/3] mmc: sdhci-iproc: add bcm2835 support   Stefan Wahren
  • [PATCH 3/3] DT: sdhci-iproc: add bcm2835 compatible   Stefan Wahren
  • [PATCH 0/3] mmc: sdhci-iproc: add bcm2835 support   Scott Branden
  • [PATCH 0/3] mmc: sdhci-iproc: add bcm2835 support   Stephen Warren
  • [PATCH 0/3] mmc: sdhci-iproc: add bcm2835 support   Ulf Hansson
• i2c-bcm2835: Unable to read from i2c0   Stefan Wahren
  • i2c-bcm2835: Unable to read from i2c0   Phil
    • i2c-bcm2835: Unable to read from i2c0   Stefan Wahren
      • i2c-bcm2835: Unable to read from i2c0   Phil
• [PATCH v6 0/22] usb: dwc2: host: Fix and speed up all the stuff, especially with splits   Douglas Anderson
  • [PATCH v6 01/22] usb: dwc2: rockchip: Make the max_transfer_size automatic   Douglas Anderson
  • [PATCH v6 02/22] usb: dwc2: host: Get aligned DMA in a more supported way   Douglas Anderson
  • [PATCH v6 03/22] usb: dwc2: host: Set host_rx_fifo_size to 525 for rk3066   Douglas Anderson
  • [PATCH v6 04/22] usb: dwc2: host: Avoid use of chan->qh after qh freed   Douglas Anderson
  • [PATCH v6 05/22] usb: dwc2: host: Always add to the tail of queues   Douglas Anderson
  • [PATCH v6 06/22] usb: dwc2: host: fix split transfer schedule sequence   Douglas Anderson
  • [PATCH v6 07/22] usb: dwc2: host: Add scheduler tracing   Douglas Anderson
  • [PATCH v6 08/22] usb: dwc2: host: Add a delay before releasing periodic bandwidth   Douglas Anderson
  • [PATCH v6 09/22] usb: dwc2: host: Giveback URB in tasklet context   Douglas Anderson
  • [PATCH v6 10/22] usb: dwc2: host: Properly set the HFIR   Douglas Anderson
    • [PATCH v6 10/22] usb: dwc2: host: Properly set the HFIR   Kever Yang
      • [PATCH v6 10/22] usb: dwc2: host: Properly set the HFIR   Doug Anderson
  • [PATCH v6 11/22] usb: dwc2: host: There's not really a TT for the root hub   Douglas Anderson
    • [PATCH v6 11/22] usb: dwc2: host: There's not really a TT for the root hub   Kever Yang
  • [PATCH v6 12/22] usb: dwc2: host: Use periodic interrupt even with DMA   Douglas Anderson
  • [PATCH v6 13/22] usb: dwc2: host: Rename some fields in struct dwc2_qh   Douglas Anderson
  • [PATCH v6 14/22] usb: dwc2: host: Reorder things in hcd_queue.c   Douglas Anderson
  • [PATCH v6 15/22] usb: dwc2: host: Split code out to make dwc2_do_reserve()   Douglas Anderson
  • [PATCH v6 16/22] usb: dwc2: host: Add scheduler logging for missed SOFs   Douglas Anderson
  • [PATCH v6 17/22] usb: dwc2: host: Manage frame nums better in scheduler   Douglas Anderson
  • [PATCH v6 18/22] usb: dwc2: host: Schedule periodic right away if it's time   Douglas Anderson
    • [PATCH v6 18/22] usb: dwc2: host: Schedule periodic right away if it's time   Kever Yang
      • [PATCH v6 18/22] usb: dwc2: host: Schedule periodic right away if it's time   Doug Anderson
      • [PATCH v6 18/22] usb: dwc2: host: Schedule periodic right away if it's time   Kever Yang
      • [PATCH v6 18/22] usb: dwc2: host: Schedule periodic right away if it's time   Doug Anderson
  • [PATCH v6 19/22] usb: dwc2: host: Add dwc2_hcd_get_future_frame_number() call   Douglas Anderson
  • [PATCH v6 20/22] usb: dwc2: host: Properly set even/odd frame   Douglas Anderson
  • [PATCH v6 21/22] usb: dwc2: host: Totally redo the microframe scheduler   Douglas Anderson
  • [PATCH v6 22/22] usb: dwc2: host: If using uframe scheduler, end splits better   Douglas Anderson

Last message date: Sun Jan 31 20:36:05 PST 2016
Archived on: Mon Feb 1 01:23:59 PST 2016

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...