[PATCH 2/5 RFC] mmc: sdhci-iproc: Actually enable the clock

[Stefan Wahren]

The RPi firmware-based clocks driver can actually disable
unused clocks, so when switching to use it we ended up losing
our MMC clock once all devices were probed.

This patch adopts the changes from 1e5a0a9a58e2 ("mmc: sdhci-bcm2835:
Actually enable the clock") to sdhci-iproc.

Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
---
 drivers/mmc/host/sdhci-iproc.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
index e22060a..55bc348 100644
--- a/drivers/mmc/host/sdhci-iproc.c
+++ b/drivers/mmc/host/sdhci-iproc.c
@@ -207,6 +207,11 @@ static int sdhci_iproc_probe(struct platform_device *pdev)
 		ret = PTR_ERR(pltfm_host->clk);
 		goto err;
 	}
+	ret = clk_prepare_enable(pltfm_host->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable host clk\n");
+		goto err;
+	}
 
 	if (iproc_host->data->pdata->quirks & SDHCI_QUIRK_MISSING_CAPS) {
 		host->caps = iproc_host->data->caps;
@@ -215,10 +220,12 @@ static int sdhci_iproc_probe(struct platform_device *pdev)
 
 	ret = sdhci_add_host(host);
 	if (ret)
-		goto err;
+		goto err_clk;
 
 	return 0;
 
+err_clk:
+	clk_disable_unprepare(pltfm_host->clk);
 err:
 	sdhci_pltfm_free(pdev);
 	return ret;
-- 
1.7.9.5