October 2014 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Oct 1 00:13:59 PDT 2014
Ending: Fri Oct 31 22:47:29 PDT 2014
Messages: 6891

• [PATCH v6 0/7] ARM: kprobes: enable OPTPROBES for ARM 32.   Jon Medhurst (Tixy)
• [PATCH v6 0/7] ARM: kprobes: enable OPTPROBES for ARM 32.   Jon Medhurst (Tixy)
• [PATCH v6 0/7] ARM: kprobes: enable OPTPROBES for ARM 32.   Jon Medhurst (Tixy)
• [PATCH 4/4] ARM: kprobes: disallow probing stack consuming instructions   Jon Medhurst (Tixy)
• [PATCH 3/4] ARM: kprobes: collects stack consumption for store instructions   Jon Medhurst (Tixy)
• ARM: issue with memory reservation from DT   Laura Abbott
• ARM: issue with memory reservation from DT   Laura Abbott
• [PATCH] ARM: mm: Refine set_memory_* functions   Laura Abbott
• ARM: issue with memory reservation from DT   Laura Abbott
• [PATCH] arm: dma-mapping: fix compilation error when CONFIG_MMU is not present   Laura Abbott
• [PATCH] arm: Drop extra return statement   Laura Abbott
• ARM: issue with memory reservation from DT   Laura Abbott
• ARM: issue with memory reservation from DT   Laura Abbott
• [PATCHv4 1/7] arm64: Treat handle_arch_irq as a function pointer   Laura Abbott
• [PATCHv4 2/7] arm64: Switch to ldr for loading the stub vectors   Laura Abbott
• [PATCHv4 3/7] arm64: Move cpu_resume into the text section   Laura Abbott
• [PATCHv4 4/7] arm64: Move some head.text functions to executable section   Laura Abbott
• [PATCHv4 5/7] arm64: Factor out fixmap initialiation from ioremap   Laura Abbott
• [PATCHv4 6/7] arm64: use fixmap for text patching when text is RO   Laura Abbott
• [PATCHv4 7/7] arm64: add better page protections to arm64   Laura Abbott
• [RESEND][PATCH] arm64: add support to dump the kernel page tables   Laura Abbott
• [PATCHv4 0/7] Better page protections for arm64   Laura Abbott
• [PATCH v0] ARMv8:mm:Support the DEBUG_PAGEALLOC   Laura Abbott
• [PATCH v0] ARMv8:mm:Support the DEBUG_PAGEALLOC   Laura Abbott
• [PATCHv4 3/7] arm64: Move cpu_resume into the text section   Laura Abbott
• [PATCHv4 4/7] arm64: Move some head.text functions to executable section   Laura Abbott
• [PATCHv4 7/7] arm64: add better page protections to arm64   Laura Abbott
• [PATCHv4 7/7] arm64: add better page protections to arm64   Laura Abbott
• [PATCH 1/4] ARM: shmobile: r8a7790: Add RGX clock to device tree   Kouei Abe
• exynos5420/arndale-octa: imprecise external aborts on exynos_defconfig   Thomas Abraham
• [PATCH v11 5/6] cpufreq: exynos: remove exynos4210/5250 specific cpufreq driver support   Thomas Abraham
• [PATCH v11 0/6] cpufreq: use generic cpufreq drivers for exynos platforms   Thomas Abraham
• [PATCH v11 1/6] clk: samsung: add infrastructure to register cpu clocks   Thomas Abraham
• [PATCH v11 2/6] clk: samsung: add cpu clock configuration data and instantiate cpu clock   Thomas Abraham
• [PATCH v11 3/6] ARM: dts: Exynos: add CPU OPP and regulator supply property   Thomas Abraham
• [PATCH v11 4/6] ARM: Exynos: switch to using generic cpufreq driver for Exynos4210/5250/5420   Thomas Abraham
• [PATCH v11 5/6] cpufreq: exynos: remove exynos4210/5250 specific cpufreq driver support   Thomas Abraham
• [PATCH v11 6/6] clk: samsung: remove unused clock aliases and update clock flags   Thomas Abraham
• [PATCH v11 0/6] cpufreq: use generic cpufreq drivers for exynos platforms   Thomas Abraham
• [PATCH v11 5/6] cpufreq: exynos: remove exynos4210/5250 specific cpufreq driver support   Thomas Abraham
• [PATCH 1/2] ARM: dts: vf500/vf610: support VF500 SoC   Stefan Agner
• [PATCH 2/2] ARM: dts: vf500-colibri: add Colibri VF50 support   Stefan Agner
• [PATCH 1/2] ARM: dts: vf500/vf610: support VF500 SoC   Stefan Agner
• [PATCH v2 3/5] ARM: imx6sl: add BYPASS support for PLL clocks   Stefan Agner
• [PATCH] ARM: imx: clk-vf610: define PLL's clock tree   Stefan Agner
• [RFC 0/7] ARM: vf610m4: Add Vybrid Cortex-M4 support   Stefan Agner
• [RFC 1/7] ARM: vf610: add low level debug support for !MMU   Stefan Agner
• [RFC 2/7] clocksource: add dependencies for Vybrid pit clocksource   Stefan Agner
• [RFC 3/7] ARM: vf610m4: add new machine and SoC for Vybrid on Cortex-M4   Stefan Agner
• [RFC 4/7] ARM: dts: add support for Vybrid running on Cortex-M4   Stefan Agner
• [RFC 5/7] irqchip: nvic: increase number of external interrupts to 112   Stefan Agner
• [RFC 6/7] ARM: vf610m4: HACK: get dtb pointer from SRC_GPR3   Stefan Agner
• [RFC 7/7] ARM: vf610m4: add defconfig for Linux on Vybrids Cortex-M4   Stefan Agner
• [RFC 1/7] ARM: vf610: add low level debug support for !MMU   Stefan Agner
• [RFC 2/7] clocksource: add dependencies for Vybrid pit clocksource   Stefan Agner
• [RFC 3/7] ARM: vf610m4: add new machine and SoC for Vybrid on Cortex-M4   Stefan Agner
• [RFC 6/7] ARM: vf610m4: HACK: get dtb pointer from SRC_GPR3   Stefan Agner
• [RFC 4/7] ARM: dts: add support for Vybrid running on Cortex-M4   Stefan Agner
• [RFC 4/7] ARM: dts: add support for Vybrid running on Cortex-M4   Stefan Agner
• [RFC 4/7] ARM: dts: add support for Vybrid running on Cortex-M4   Stefan Agner
• [RFC 4/7] ARM: dts: add support for Vybrid running on Cortex-M4   Stefan Agner
• [PATCH v5 0/4] vf610: Add GPIO support   Stefan Agner
• [PATCH v5 1/4] pinctrl: imx: add gpio pinmux support for vf610   Stefan Agner
• [PATCH v5 2/4] gpio: vf610: add gpiolib/IRQ chip driver for Vybrid   Stefan Agner
• [PATCH v5 3/4] ARM: dts: vf610: use new GPIO support   Stefan Agner
• [PATCH v5 4/4] Documentation: dts: add bindings for Vybrid GPIO/PORT module   Stefan Agner
• [PATCH] ARM: imx: clk-vf610: define PLL's clock tree   Stefan Agner
• [PATCH v2 0/4] ARM: vf610: restructure device trees   Stefan Agner
• [PATCH v2 1/4] ARM: dts: vf610: assign oscillator to clock module   Stefan Agner
• [PATCH v2 2/4] ARM: imx: clk-vf610: get input clocks from assigned clocks   Stefan Agner
• [PATCH v2 3/4] ARM: dts: vf610: create generic base device trees   Stefan Agner
• [PATCH v2 4/4] ARM: dts: vf500-colibri: add Colibri VF50 support   Stefan Agner
• [PATCH RESEND] ARM: imx: clk-vf610: define PLL's clock tree   Stefan Agner
• [PATCHv6 0/6] ARM: imx: Add Freescale LS1021A SoC and board support   Stefan Agner
• [PATCHv2 0/5] Legacy instruction emulation for arm64   Punit Agrawal
• [PATCHv2 1/5] arm64: Add support for hooks to handle undefined instructions   Punit Agrawal
• [PATCHv2 2/5] arm64: Add AArch32 instruction set condition code checks   Punit Agrawal
• [PATCHv2 3/5] arm64: Port SWP/SWPB emulation support from arm   Punit Agrawal
• [PATCHv2 4/5] arm64: Emulate CP15 Barrier instructions   Punit Agrawal
• [PATCHv2 5/5] arm64: Trace emulation of AArch32 legacy instructions   Punit Agrawal
• [PATCHv2 0/5] Legacy instruction emulation for arm64   Punit Agrawal
• [PATCHv2 1/5] arm64: Add support for hooks to handle undefined instructions   Punit Agrawal
• [PATCHv2 2/5] arm64: Add AArch32 instruction set condition code checks   Punit Agrawal
• [PATCHv2 3/5] arm64: Port SWP/SWPB emulation support from arm   Punit Agrawal
• [PATCHv2 4/5] arm64: Emulate CP15 Barrier instructions   Punit Agrawal
• [PATCHv2 5/5] arm64: Trace emulation of AArch32 legacy instructions   Punit Agrawal
• [PATCHv2 5/5] arm64: Trace emulation of AArch32 legacy instructions   Punit Agrawal
• [PATCHv3 0/5] Legacy instruction emulation for arm64   Punit Agrawal
• [PATCHv3 1/5] arm64: Add support for hooks to handle undefined instructions   Punit Agrawal
• [PATCHv3 1/5] arm64: Add support for hooks to handle undefined instructions   Punit Agrawal
• [PATCHv3 2/5] arm64: Add AArch32 instruction set condition code checks   Punit Agrawal
• [PATCHv3 3/5] arm64: Port SWP/SWPB emulation support from arm   Punit Agrawal
• [PATCHv3 4/5] arm64: Emulate CP15 Barrier instructions   Punit Agrawal
• [PATCHv3 5/5] arm64: Trace emulation of AArch32 legacy instructions   Punit Agrawal
• [PATCH 1/1] bus: cci: move away from arm_pmu framework   Punit Agrawal
• [PATCHv3 1/5] arm64: Add support for hooks to handle undefined instructions   Punit Agrawal
• [PATCHv3 2/5] arm64: Add AArch32 instruction set condition code checks   Punit Agrawal
• [PATCH 1/7] can: m_can: fix possible sleep in napi poll   Dong Aisheng
• [PATCH 2/7] can: m_can: fix the incorrect error messages   Dong Aisheng
• [PATCH 3/7] can: m_can: add .ndo_change_mtu function   Dong Aisheng
• [PATCH 4/7] can: m_can: add a bit delay after setting CCCR_INIT bit   Dong Aisheng
• [PATCH 5/7] can: clear ctrlmode when close candev   Dong Aisheng
• [PATCH 6/7] can: m_can: update to support CAN FD features   Dong Aisheng
• [PATCH 7/7] can: m_can: workaround for transmit data less than 4 bytes   Dong Aisheng
• [PATCH 6/7] can: m_can: update to support CAN FD features   Dong Aisheng
• [PATCH] mmc: dw_mmc: Reset DMA before enabling IDMAC   Alim Akhtar
• [PATCH] mmc: dw_mmc: Reset DMA before enabling IDMAC   Alim Akhtar
• [PATCH] mmc: dw_mmc: Reset DMA before enabling IDMAC   Alim Akhtar
• [PATCH v2 0/2] serial: samsung: add support for early console   Alim Akhtar
• [PATCH v2] mmc: dw_mmc: Reset DMA before enabling IDMAC   Alim Akhtar
• [PATCH v2 6/7] arm64: dts: Add nodes for mmc, i2c, rtc, watchdog on Exynos7   Alim Akhtar
• [PATCH v2 6/7] arm64: dts: Add nodes for mmc, i2c, rtc, watchdog on Exynos7   Alim Akhtar
• [PATCH v3] clocksource: arch_timer: Allow the device tree to specify the physical timer   Doug Anderson
• [PATCH V2 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators   Doug Anderson
• [PATCH V2 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators   Doug Anderson
• [PATCH v2 0/3] ARM: rk3288 : Add PM Domain support   Doug Anderson
• [PATCH] i2c: rk3x: fix 0 length write transfers   Doug Anderson
• [PATCH] ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board   Doug Anderson
• [PATCH] ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board   Doug Anderson
• [PATCH v7 5/5] ARM: dts: enable Thermal on rk3288-evb board   Doug Anderson
• [PATCH] ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board   Doug Anderson
• [PATCH] clk: rockchip: Add CLK_SET_RATE_PARENT to aclk_cpu_pre   Doug Anderson
• [PATCH] mmc: dw_mmc: Reset DMA before enabling IDMAC   Doug Anderson
• [PATCH 1/2] clk: rockchip: add 400MHz and 500MHz for rk3288 clock rate   Doug Anderson
• [PATCH 2/2] ARM: dts: enable init rate for clock   Doug Anderson
• [PATCH 0/2] init some clock rate from dts for rk3288   Doug Anderson
• [PATCH 2/2] ARM: dts: enable init rate for clock   Doug Anderson
• [PATCH 2/2] ARM: dts: enable init rate for clock   Doug Anderson
• [PATCH v3] i2c: rk3x: adjust the LOW divison based on characteristics of SCL   Doug Anderson
• [PATCH] ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board   Doug Anderson
• [PATCH] mmc: dw_mmc: Reset DMA before enabling IDMAC   Doug Anderson
• [PATCH v2 1/2] clk: rockchip: add 400MHz and 500MHz for rk3288 clock rate   Doug Anderson
• [PATCH] clk: rockchip: change PLL setting for better clock jitter   Doug Anderson
• [PATCH v4] i2c: rk3x: adjust the LOW divison based on characteristics of SCL   Doug Anderson
• [PATCH v9 1/5] thermal: rockchip: add driver for thermal   Doug Anderson
• [PATCH] mmc: dw_mmc: rockchip: Don't recalc the clock when it goes off   Doug Anderson
• [PATCH] mmc: dw_mmc: Reset DMA before enabling IDMAC   Doug Anderson
• [PATCH v4 4/6] ARM: rockchip: add basic smp support for rk3288   Doug Anderson
• [PATCH 1/1] ARM: EXYNOS: Call regulator core suspend prepare and finish functions   Doug Anderson
• [PATCH 2/4] clk: rockchip: RK3288: add suspend and resume   Doug Anderson
• [PATCH 4/4] ARM: rockchip: add pmu-sram sub   Doug Anderson
• [PATCH 3/4] ARM: dts: add RK3288 suspend support   Doug Anderson
• [PATCH 1/4] ARM: rockchip: add suspend and resume for RK3288   Doug Anderson
• [PATCH 2/2] ARM: dts: socfpga: Add a 3.3V fixed regulator node   Doug Anderson
• [PATCH 2/2] ARM: dts: socfpga: Add a 3.3V fixed regulator node   Doug Anderson
• [PATCH 2/2] ARM: dts: socfpga: Add a 3.3V fixed regulator node   Doug Anderson
• [PATCH v2 2/4] ARM: rockchip: add suspend and resume for RK3288   Doug Anderson
• [PATCHv2 1/2] ARM: dts: socfpga: Fix SD card detect   Doug Anderson
• [PATCHv2 2/2] ARM: dts: socfpga: Add a 3.3V fixed regulator node   Doug Anderson
• [PATCH v2 2/2] ARM: EXYNOS: Call regulator core suspend prepare and finish functions   Doug Anderson
• [PATCH v2 2/2] ARM: EXYNOS: Call regulator core suspend prepare and finish functions   Doug Anderson
• [PATCHv2 1/2] ARM: dts: socfpga: Fix SD card detect   Doug Anderson
• [PATCHv2 1/2] ARM: dts: socfpga: Fix SD card detect   Doug Anderson
• [PATCHv2 1/2] ARM: dts: socfpga: Fix SD card detect   Doug Anderson
• [PATCH v3 2/2] ARM: EXYNOS: Call regulator core suspend prepare and finish functions   Doug Anderson
• [PATCH v3 1/2] Revert "mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption"   Doug Anderson
• [PATCH 1/4] pinctrl: rockchip: Set wake_enabled   Doug Anderson
• [PATCH 2/4] pinctrl: rockchip: Don't call pinctrl_gpio_direction_output() in pin_config_set()   Doug Anderson
• [PATCH 3/4] pinctrl: rockchip: Parse pin groups before calling pinctrl_register()   Doug Anderson
• [PATCH 4/4] pinctrl: rockchip: Protect read-modify-write with the spinlock   Doug Anderson
• [PATCH 4/4] pinctrl: rockchip: Protect read-modify-write with the spinlock   Doug Anderson
• [PATCHv2 1/2] ARM: dts: socfpga: Fix SD card detect   Doug Anderson
• [PATCH 2/4] pinctrl: rockchip: Don't call pinctrl_gpio_direction_output() in pin_config_set()   Doug Anderson
• [PATCH v2 1/4] pinctrl: rockchip: Set wake_enabled   Doug Anderson
• [PATCH v2 2/4] pinctrl: rockchip: Don't call pinctrl_gpio_direction_output() in pin_config_set()   Doug Anderson
• [PATCH v2 3/4] pinctrl: rockchip: Parse pin groups before calling pinctrl_register()   Doug Anderson
• [PATCH v2 4/4] pinctrl: rockchip: Protect read-modify-write with the spinlock   Doug Anderson
• [PATCH v4 1/6] pinctrl: rockchip: add suspend/resume functions   Doug Anderson
• [PATCH v4 2/6] pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume   Doug Anderson
• [PATCH v4 3/6] clk: rockchip: RK3288: add suspend and resume   Doug Anderson
• [PATCH v4 4/6] ARM: rockchip: add suspend and resume for RK3288   Doug Anderson
• [PATCHv3 1/2] ARM: dts: socfpga: Fix SD card detect   Doug Anderson
• [PATCH v6 1/3] power-domain: add power domain drivers for Rockchip platform   Doug Anderson
• [PATCHv4 1/3] ARM: dts: socfpga: rename gpio nodes   Doug Anderson
• [PATCHv4 2/3] ARM: dts: socfpga: Fix SD card detect   Doug Anderson
• [PATCH v4 6/6] ARM: dts: add RK3288 suspend support   Doug Anderson
• [PATCH v4 5/6] ARM: rockchip: Add pmu-sram binding   Doug Anderson
• [PATCH v2 1/4] pinctrl: rockchip: Set wake_enabled   Doug Anderson
• [PATCH v4 4/6] ARM: rockchip: add suspend and resume for RK3288   Doug Anderson
• [PATCH] ARM: dts: Add SPI DMA into rk3288.dtsi   Doug Anderson
• [PATCH v3 4/6] ARM: rockchip: add suspend and resume for RK3288   Doug Anderson
• [PATCH v4 5/6] ARM: rockchip: Add pmu-sram binding   Doug Anderson
• [PATCH v3 2/6] pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume   Doug Anderson
• [PATCH 1/4] pinctrl: rockchip: Set wake_enabled   Doug Anderson
• [RFC PATCH 1/2] pinctrl: Add output-disable   Doug Anderson
• [RFC PATCH 2/2] pinctrl: rockchip: Implement PIN_CONFIG_OUTPUT_DISABLE   Doug Anderson
• [PATCH v2] ARM: dts: rockchip: use internal pull-up resistors on I2C busses   Doug Anderson
• [PATCH v6 7/7] ARM: dts: add suspend voltage setting for RK808   Doug Anderson
• [PATCH v6 7/7] ARM: dts: add suspend voltage setting for RK808   Doug Anderson
• [PATCH] clk: rockchip: change PLL setting for better clock jitter   Doug Anderson
• [PATCH v6 4/7] ARM: rockchip: add suspend and resume for RK3288   Doug Anderson
• [PATCH] clk: rockchip: disable unused clocks   Doug Anderson
• [PATCH v6 0/7] This is the 1st version of suspend for RK3288.   Doug Anderson
• [PATCH] clk: rockchip: disable unused clocks   Doug Anderson
• [PATCH] mmc: dw_mmc: add a quirk for the defferent bit of sdio interrupt   Doug Anderson
• [PATCH] mmc: dw_mmc: add a quirk for the defferent bit of sdio interrupt   Doug Anderson
• [PATCH v2] clk: rockchip: disable unused clocks   Doug Anderson
• [PATCH v2] clk: rockchip: disable unused clocks   Doug Anderson
• [PATCH v2] mmc: dw_mmc: add support for the other bit of sdio interrupt   Doug Anderson
• [PATCH v2] mmc: dw_mmc: add support for the other bit of sdio interrupt   Doug Anderson
• [PATCH v7 0/3] ARM: rk3288 : Add PM Domain support   Doug Anderson
• [PATCH v3] clk: rockchip: disable unused clocks   Doug Anderson
• [PATCH 1/2] regulator: Document binding for regulator suspend voltage   Doug Anderson
• [PATCH 2/2] regulator: of: Add support for parsing microvolts for suspend state   Doug Anderson
• [RFC 5/7] soc: qcom: Add Shared Memory Driver   Bjorn Andersson
• [PATCH] ARM: qcom: Increase MMC_BLOCK_MINORS in defconfig   Bjorn Andersson
• [PATCH v2 3/3] ARM: dts: qcom: Add SDHC nodes for APQ8084 platform   Bjorn Andersson
• [RFC 6/7] mfd: qcom-smd-rpm: Driver for the Qualcomm RPM over SMD   Bjorn Andersson
• [RFC 4/7] soc: qcom: Add Shared Memory Manager driver   Bjorn Andersson
• [RFC 3/7] mfd: devicetree: bindings: Add Qualcomm SMD based RPM DT binding   Bjorn Andersson
• [RFC 6/7] mfd: qcom-smd-rpm: Driver for the Qualcomm RPM over SMD   Bjorn Andersson
• [PATCH] genirq: Introduce irq_read_line()   Bjorn Andersson
• [PATCH] genirq: Introduce irq_read_line()   Bjorn Andersson
• [RFC 4/7] soc: qcom: Add Shared Memory Manager driver   Bjorn Andersson
• [PATCH] genirq: Introduce irq_read_line()   Bjorn Andersson
• [PATCH] genirq: Introduce irq_read_line()   Bjorn Andersson
• [RFC 5/7] soc: qcom: Add Shared Memory Driver   Bjorn Andersson
• [RFC 5/7] soc: qcom: Add Shared Memory Driver   Bjorn Andersson
• [PATCH V4 1/6] mm: Introduce a general RCU get_user_pages_fast.   Andrea Arcangeli
• [PATCH V4 1/6] mm: Introduce a general RCU get_user_pages_fast.   Andrea Arcangeli
• [PATCH 2/6] ASoC: cs42l51: make driver user-selectable   Brian Austin
• [PATCH 1/6] ASoC: cs42l51: re-add of_match_table pointer   Brian Austin
• [RFC PATCH 10/16] mips: support poweroff through poweroff handler call chain   Ralf Baechle
• [PATCH v2 08/47] kernel: Move pm_power_off to common code   Ralf Baechle
• [PATCH v3 16/27] Mips/MSI: Save msi chip in pci sysdata   Ralf Baechle
• [PATCH v3 18/27] MIPS/Xlp: Remove the dead function destroy_irq() to fix build error   Ralf Baechle
• [PATCH 00/26] ARM: OMAP2+: PRCM cleanups for 3.18 merge window   Felipe Balbi
• [PATCH 00/26] ARM: OMAP2+: PRCM cleanups for 3.18 merge window   Felipe Balbi
• CPSW bug with AM437x SK   Felipe Balbi
• [PATCH 00/26] ARM: OMAP2+: PRCM cleanups for 3.18 merge window   Felipe Balbi
• CPSW bug with AM437x SK   Felipe Balbi
• BUG (maybe) with find_get_entry()   Felipe Balbi
• RCU bug with v3.17-rc3 ?   Felipe Balbi
• RCU bug with v3.17-rc3 ?   Felipe Balbi
• [PATCH v3 2/3] ARM: shmobile: koelsch: enable HS-USB   Felipe Balbi
• [PATCH v3 2/3] ARM: shmobile: koelsch: enable HS-USB   Felipe Balbi
• [PATCH v3 2/3] ARM: shmobile: koelsch: enable HS-USB   Felipe Balbi
• RCU bug with v3.17-rc3 ?   Felipe Balbi
• RCU bug with v3.17-rc3 ?   Felipe Balbi
• RCU bug with v3.17-rc3 ?   Felipe Balbi
• RCU bug with v3.17-rc3 ?   Felipe Balbi
• RCU bug with v3.17-rc3 ?   Felipe Balbi
• RCU bug with v3.17-rc3 ?   Felipe Balbi
• [PATCH 00/12] rtc: omap: fixes and power-off feature   Felipe Balbi
• [PATCH 01/12] rtc: omap: fix clock-source configuration   Felipe Balbi
• [PATCH 02/12] rtc: omap: fix missing wakealarm attribute   Felipe Balbi
• [PATCH 03/12] rtc: omap: fix class-device registration   Felipe Balbi
• [PATCH 04/12] rtc: omap: remove unused register-base define   Felipe Balbi
• [PATCH 05/12] rtc: omap: remove redundant debug message   Felipe Balbi
• [PATCH 06/12] rtc: omap: use dev_info and dev_dbg   Felipe Balbi
• [PATCH 07/12] rtc: omap: silence bogus power-up reset message at probe   Felipe Balbi
• [PATCH 08/12] rtc: omap: restore irq state after reading TC registers   Felipe Balbi
• [PATCH 07/12] rtc: omap: silence bogus power-up reset message at probe   Felipe Balbi
• [PATCH 09/12] rtc: omap: add support for pmic_power_en   Felipe Balbi
• [PATCH 10/12] rtc: omap: enable wake-up from power off   Felipe Balbi
• [PATCH 11/12] ARM: dts: am33xx: update rtc node compatible property   Felipe Balbi
• [PATCH 12/12] ARM: dts: am335x-bone-common: enable power off and rtc wake up   Felipe Balbi
• [PATCH 08/12] rtc: omap: restore irq state after reading TC registers   Felipe Balbi
• [PATCH 07/12] rtc: omap: silence bogus power-up reset message at probe   Felipe Balbi
• [PATCH 07/12] rtc: omap: silence bogus power-up reset message at probe   Felipe Balbi
• [PATCH 03/12] rtc: omap: fix class-device registration   Felipe Balbi
• [PATCH 1/3] video: fbdev: omap2: omapfb: remove __exit annotation   Felipe Balbi
• [PATCH 2/3] video: fbdev: omap2: omapfb: add missing MODULE_ALIAS()   Felipe Balbi
• [PATCH 3/3] arm: boot: dts: am437x-sk: fix lcd enable pin mux data   Felipe Balbi
• [PATCH 2/3] video: fbdev: omap2: omapfb: add missing MODULE_ALIAS()   Felipe Balbi
• [PATCH 2/3] video: fbdev: omap2: omapfb: add missing MODULE_ALIAS()   Felipe Balbi
• [PATCH 2/3] video: fbdev: omap2: omapfb: add missing MODULE_ALIAS()   Felipe Balbi
• [PATCH 1/3] video: fbdev: omap2: omapfb: remove __exit annotation   Felipe Balbi
• [PATCH 1/3] video: fbdev: omap2: omapfb: remove __exit annotation   Felipe Balbi
• [PATCH 00/12] rtc: omap: fixes and power-off feature   Felipe Balbi
• [PATCH 00/12] rtc: omap: fixes and power-off feature   Felipe Balbi
• USB Ethernet gadget on Nokia n900   Felipe Balbi
• RCU bug with v3.17-rc3 ?   Felipe Balbi
• [PATCH 08/12] rtc: omap: restore irq state after reading TC registers   Felipe Balbi
• [PATCH 09/12] rtc: omap: add support for pmic_power_en   Felipe Balbi
• [PATCH 00/12] rtc: omap: fixes and power-off feature   Felipe Balbi
• [PATCH V3 1/3] rtc: omap: use module_platform_driver   Felipe Balbi
• [PATCH V3 3/3] rtc: omap: Support regulator supply for RTC   Felipe Balbi
• [PATCH V4 3/3] rtc: omap: Support regulator supply for RTC   Felipe Balbi
• [PATCH V3 3/3] rtc: omap: Support regulator supply for RTC   Felipe Balbi
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Felipe Balbi
• [PATCH] ARM: remove redundant irq disable at halt and restart   Felipe Balbi
• [PATCH] ARM: remove redundant irq disable at halt and restart   Felipe Balbi
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Felipe Balbi
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Felipe Balbi
• [PATCH] ARM: remove redundant irq disable at halt and restart   Felipe Balbi
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Felipe Balbi
• [PATCH] ARM: remove redundant irq disable at halt and restart   Felipe Balbi
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Felipe Balbi
• [PATCH v2 1/5] phy: berlin-sata: Move PHY_BASE into private data struct   Felipe Balbi
• [PATCH v1 01/10] of: Rename "poweroff-source" property to "system-power-controller"   Felipe Balbi
• [PATCH v1 02/10] dt-bindings: Document the standard property "system-power-controller"   Felipe Balbi
• [PATCH v1 03/10] regulator: act8865: Use of_is_system_power_controller helper function   Felipe Balbi
• [PATCH v2 06/10] mfd: tps65910: Use the standard DT property system-power-controller   Felipe Balbi
• [PATCH v2 06/10] mfd: tps65910: Use the standard DT property system-power-controller   Felipe Balbi
• [PATCH v2 07/10] ARM: dts: tegra: Use standard power-off property in tps65911 for tegra30 apalis   Felipe Balbi
• [PATCH v2 08/10] ARM: dts: tegra: Use standard power-off property in tps65911 for tegra30 beaver   Felipe Balbi
• [PATCH v3] rtc: omap: add support for pmic_power_en   Felipe Balbi
• [PATCH v1 01/10] of: Rename "poweroff-source" property to "system-power-controller"   Felipe Balbi
• [PATCH v2 06/10] mfd: tps65910: Use the standard DT property system-power-controller   Felipe Balbi
• [PATCH v1 01/10] of: Rename "poweroff-source" property to "system-power-controller"   Felipe Balbi
• [PATCH v3] rtc: omap: add support for pmic_power_en   Felipe Balbi
• [PATCH v1 02/10] dt-bindings: Document the standard property "system-power-controller"   Felipe Balbi
• [PATCH V4 3/3] rtc: omap: Support regulator supply for RTC   Felipe Balbi
• arm: JUMP_LABEL and DEBUG_SET_MODULE_RONX should be mutually exclusive?   Jason Baron
• [PATCH] ARM: dts: omap3-gta04: Use omap specific pinctrl defines   Marek Belisko
• [PATCH 1/6] ARM: at91: remove at91sam9g45/9m10 legacy board support   Alexandre Belloni
• [PATCH] ARM: at91/dt: at91sam9rl: add rtc   Alexandre Belloni
• [PATCH] ARM: at91: remove at91sam9rl legacy board support   Alexandre Belloni
• [PATCH 1/1] ARM: at91/dt: sam9x5: Add CAN device nodes   Alexandre Belloni
• [PATCH 1/1] ARM: at91/dt: sam9263: Add CAN device nodes   Alexandre Belloni
• [PATCH v2 1/1] ARM: at91/dt: sam9x5: Add CAN device nodes   Alexandre Belloni
• [PATCHv7 1/2] pwm: Add Allwinner SoC support   Alexandre Belloni
• [PATCHv7 1/2] pwm: Add Allwinner SoC support   Alexandre Belloni
• [PATCH] ARM: at91/dt: sam9263: fix PLLB frequencies   Alexandre Belloni
• [PATCH 0/3] Remove mach/atmel-mci.h   Alexandre Belloni
• [PATCH 1/3] mmc: atmel-mci: move mache header to platform_data   Alexandre Belloni
• [PATCH 2/3] ARM: at91: remove mach/atmel-mci.h   Alexandre Belloni
• [PATCH 3/3] avr32: remove mach/atmel-mci.h   Alexandre Belloni
• [PATCH 2/3] ARM: at91: remove mach/atmel-mci.h   Alexandre Belloni
• [PATCHv2 0/3] Remove mach/atmel-mci.h   Alexandre Belloni
• [PATCHv2 1/3] mmc: atmel-mci: move mache header to platform_data   Alexandre Belloni
• [PATCHv2 2/3] ARM: at91: remove mach/atmel-mci.h   Alexandre Belloni
• [PATCHv2 3/3] avr32: remove mach/atmel-mci.h   Alexandre Belloni
• [PATCH] pinctrl: at91: use own header   Alexandre Belloni
• [PATCH 20/26] ARM: sun7i: cubietruck: Relicense the device tree under GPLv2/X11   Alexandre Belloni
• [PATCH] drivers: video: fbdev: atmel_lcdfb.c: remove unnecessary header   Alexandre Belloni
• [PATCHv8 0/2] Add Allwinner SoCs PWM support   Alexandre Belloni
• [PATCHv8 1/2] pwm: Add Allwinner SoC support   Alexandre Belloni
• [PATCHv8 2/2] pwm: sunxi: document OF bindings   Alexandre Belloni
• [PATCHv8 1/2] pwm: Add Allwinner SoC support   Alexandre Belloni
• [PATCHv8 1/2] pwm: Add Allwinner SoC support   Alexandre Belloni
• [PATCH] power: reset: at91-reset: fix power down register   Alexandre Belloni
• [PATCH 0/8] ARM: at91: Remove mach/ includes from the reset driver   Alexandre Belloni
• [PATCH 1/8] memory: atmel-sdramc: export a shutdown function   Alexandre Belloni
• [PATCH 2/8] memory: atmel-sdramc: allow probing from pdata   Alexandre Belloni
• [PATCH 3/8] ARM: at91: sam9: probe the RAMC driver from pdata   Alexandre Belloni
• [PATCH 4/8] ARM: at91: sam9g45/sam9rl: probe the ramc driver   Alexandre Belloni
• [PATCH 5/8] power: reset: at91-reset: use at91_ramc_shutdown   Alexandre Belloni
• [PATCH 6/8] ARM: at91: sam9: remove useless resource for rstc   Alexandre Belloni
• [PATCH 7/8] ARM: at91: sam9g45/sam9rl: remove useless resources for rstc   Alexandre Belloni
• [PATCH 8/8] MAINTAINERS: add at91 power and memory entries   Alexandre Belloni
• [PATCH 5/8] power: reset: at91-reset: use at91_ramc_shutdown   Alexandre Belloni
• [PATCH] ARM: at91: sama5: update defconfig   Alexandre Belloni
• [PATCHv2 1/3] mmc: atmel-mci: move mache header to platform_data   Alexandre Belloni
• [PATCH v2 0/8] ARM: at91: Remove mach/ includes from the reset driver   Alexandre Belloni
• [PATCH v2 1/8] memory: atmel-sdramc: export a shutdown function   Alexandre Belloni
• [PATCH v2 2/8] memory: atmel-sdramc: allow probing from pdata   Alexandre Belloni
• [PATCH v2 3/8] ARM: at91: sam9: probe the RAMC driver from pdata   Alexandre Belloni
• [PATCH v2 4/8] ARM: at91: sam9g45/sam9rl: probe the ramc driver   Alexandre Belloni
• [PATCH v2 5/8] power: reset: at91-reset: use at91_ramc_shutdown   Alexandre Belloni
• [PATCH v2 6/8] ARM: at91: sam9: remove useless resource for rstc   Alexandre Belloni
• [PATCH v2 7/8] ARM: at91: sam9g45/sam9rl: remove useless resources for rstc   Alexandre Belloni
• [PATCH v2 8/8] MAINTAINERS: add at91 power and memory entries   Alexandre Belloni
• [PATCH v2 0/8] ARM: at91: Remove mach/ includes from the reset driver   Alexandre Belloni
• [PATCH v2 0/8] ARM: at91: Remove mach/ includes from the reset driver   Alexandre Belloni
• [PATCH] pinctrl: at91: fix compilation   Alexandre Belloni
• [PATCH v2] pinctrl: at91: fix compilation   Alexandre Belloni
• [PATCH] pinctrl: at91: use own header   Alexandre Belloni
• [PATCH] watchdog: at91rm9200: allow building when using device tree   Alexandre Belloni
• [PATCH] watchdog: at91rm9200: allow building when using device tree   Alexandre Belloni
• [PATCH] watchdog: at91rm9200: allow building when using device tree   Alexandre Belloni
• [PATCH 1/2] ARM: at91: rm9200 add system timer resources to watchdog   Alexandre Belloni
• [PATCH 2/2] watchdog: at91rm9200 remove mach/ header dependency   Alexandre Belloni
• [PATCH 1/2] ARM: at91: rm9200 add system timer resources to watchdog   Alexandre Belloni
• [PATCH 2/2] watchdog: at91rm9200 remove mach/ header dependency   Alexandre Belloni
• [PATCHv4 4/7] hwspinlock/core: add common OF helpers   Ohad Ben-Cohen
• [RFC 5/7] soc: qcom: Add Shared Memory Driver   Ohad Ben-Cohen
• [RFC 5/7] soc: qcom: Add Shared Memory Driver   Ohad Ben-Cohen
• [PATCH] omap2-mcspi: when overriding spi settings, don't clobber IO error on calling omap2_mcspi_setup_transfer   Dave Bender
• [PATCH v2] i2c: axxia: Add I2C driver for AXM55xx   Anders Berg
• [PATCH v3] i2c: axxia: Add I2C driver for AXM55xx   Anders Berg
• [PATCH v4 1/2] iopoll: Introduce memory-mapped IO polling macros   Arnd Bergmann
• [PATCH v4 2/2] iommu/arm-smmu: add support for iova_to_phys through ATS1PR   Arnd Bergmann
• [PATCH v6 07/12] usb: chipidea: add a usb2 driver for ci13xxx   Arnd Bergmann
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Arnd Bergmann
• [PATCH] nand: omap2: fix building with CONFIG_MTD_NAND_OMAP_BCH=m   Arnd Bergmann
• [PATCH] nand: omap2: fix building with CONFIG_MTD_NAND_OMAP_BCH=m   Arnd Bergmann
• [PATCH] nand: omap2: fix building with CONFIG_MTD_NAND_OMAP_BCH=m   Arnd Bergmann
• [PATCH 08/24] Allow a 32bit ABI to use the naming of the 64bit ABI syscalls to avoid confusion of not splitting the registers   Arnd Bergmann
• [GIT PULL] qcom defconfig changes for v3.18   Arnd Bergmann
• [GIT PULL] qcom SoC changes for v3.18   Arnd Bergmann
• [GIT PULL] arm: mediatek: Add support for mt8127 and mt8135 SoCs   Arnd Bergmann
• [GIT PULL] ARM: berlin: Driver changes for v3.18   Arnd Bergmann
• [GIT PULL] ARM: STi: DT changes for v3.18   Arnd Bergmann
• [GIT PULL] arm: mediatek: Add support for mt8127 and mt8135 SoCs   Arnd Bergmann
• [GIT PULL 1/2] Second Samsung DT updates for v3.18   Arnd Bergmann
• [GIT PULL 2/2] Exynos PM updates for v3.18   Arnd Bergmann
• [GIT PULL 1/3] 3rd Round for Samsung-cleanup-2 for v3.18   Arnd Bergmann
• [GIT PULL 2/3] 3rd Round of Samsung-DT-3 updates for v3.18   Arnd Bergmann
• [GIT PULL 3/3] 3rd Round of Exynos-PM-2 Updates for v3.18   Arnd Bergmann
• [GIT PULL] ARM: brcmstb: SMP, earlyprintk and Kconfig cleanups   Arnd Bergmann
• [GIT PULL] Add initial support for Broadcom Cygnus SoC   Arnd Bergmann
• [GIT PULL] ARM: STi: DT changes for v3.18   Arnd Bergmann
• [GIT PULL 3/3] 3rd Round of Exynos-PM-2 Updates for v3.18   Arnd Bergmann
• [PATCH 1/4] ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller   Arnd Bergmann
• [PATCH 1/6] ARM: meson: add meson8 machine definition   Arnd Bergmann
• [PATCH 1/6] ARM: meson: add meson8 machine definition   Arnd Bergmann
• [PATCH] wil6210: remove obsolete msm platform code   Arnd Bergmann
• [PATCH 1/2] socfpga: hotplug: put cpu1 in wfi   Arnd Bergmann
• [PATCH v10 0/4] APM X-Gene PCIe host controller   Arnd Bergmann
• [GIT PULL] at91: soc for 3.18 #3   Arnd Bergmann
• linux-next: build failure after merge of the arm-soc tree   Arnd Bergmann
• [PATCH 1/3 V2] CNS3xxx: Fix debug UART.   Arnd Bergmann
• [PATCH] MAINTAINERS: CNS3xxx and IXP4xx update.   Arnd Bergmann
• [PATCH 0/3] ARM: Meson6: enable SMP   Arnd Bergmann
• [GIT PULL] RealView device tree support   Arnd Bergmann
• [GIT PULL] ARM: dts: Keystone DTS fixes updates for 3.18   Arnd Bergmann
• [GIT PULL] ARM: mvebu: Last DT changes for v3.18   Arnd Bergmann
• [PATCH 0/3] ARM: Meson6: enable SMP   Arnd Bergmann
• [PATCH 1/2] ARM: dts: vf500/vf610: support VF500 SoC   Arnd Bergmann
• [GIT PULL] arm64, thunder: Enable Cavium Thunder SoC Family   Arnd Bergmann
• [PATCH 0/3] ARM: Meson6: enable SMP   Arnd Bergmann
• [PATCH 1/3 V2] CNS3xxx: Fix debug UART.   Arnd Bergmann
• [PATCH 0/3] ARM: Meson6: enable SMP   Arnd Bergmann
• [PATCH 2/2] net: spider_net: avoid using signed char for bitops   Arnd Bergmann
• [PATCH 3/4] [media] Remove optional dependency on PLAT_S5P   Arnd Bergmann
• [PATCH 1/4] ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller   Arnd Bergmann
• [PATCH 1/4] ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller   Arnd Bergmann
• [PATCH] Revert "ARM: pxa: call debug_ll_io_init for earlyprintk"   Arnd Bergmann
• [PATCH v1] clk: pxa clocks build system fix   Arnd Bergmann
• [PATCH] Revert "ARM: pxa: call debug_ll_io_init for earlyprintk"   Arnd Bergmann
• [PATCH v1] clk: pxa clocks build system fix   Arnd Bergmann
• [PATCH v3] clocksource: arch_timer: Allow the device tree to specify uninitialized CNTVOFF   Arnd Bergmann
• [PATCH v1] clk: pxa clocks build system fix   Arnd Bergmann
• [PATCH] Revert "ARM: pxa: call debug_ll_io_init for earlyprintk"   Arnd Bergmann
• [PATCH] [RFC] ARM: shmobile: Add early debugging support using SCIF(A)   Arnd Bergmann
• [PATCH v3 1/4] Documentation: devicetree: bindings: Document correct and deprecated vendor-prefix with device isl29028   Arnd Bergmann
• [PATCH v3 2/4] Documentation: devicetree: bindings: Document deprecated device vendor name to fix related warning   Arnd Bergmann
• [PATCH v3 3/4] Staging: iio: light: Added correct vendor-prefix for device isl29028   Arnd Bergmann
• [PATCH v3 4/4] arch: arm: boot: dts: Added correct vendor-prefix with device name to compatible property   Arnd Bergmann
• [PATCH v3 4/4] arch: arm: boot: dts: Added correct vendor-prefix with device name to compatible property   Arnd Bergmann
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Arnd Bergmann
• [PATCH v3 4/4] arch: arm: boot: dts: Added correct vendor-prefix with device name to compatible property   Arnd Bergmann
• [PATCH] Revert "ARM: pxa: call debug_ll_io_init for earlyprintk"   Arnd Bergmann
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Arnd Bergmann
• [PATCH 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Arnd Bergmann
• [PATCH 3/6] dt-bindings: Document Broadcom Cygnus SoC and clock driver   Arnd Bergmann
• [PATCH 4/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC   Arnd Bergmann
• [PATCH] ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board   Arnd Bergmann
• [PATCH 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Arnd Bergmann
• [PATCH 3/6] dt-bindings: Document Broadcom Cygnus SoC and clock driver   Arnd Bergmann
• [PATCH v4 1/2] iopoll: Introduce memory-mapped IO polling macros   Arnd Bergmann
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Arnd Bergmann
• [PATCH v1 1/3] gpio: Add APM X-Gene standby GPIO controller driver   Arnd Bergmann
• [PATCH] ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board   Arnd Bergmann
• [PATCH 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Arnd Bergmann
• [PATCH] ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board   Arnd Bergmann
• [PATCH 2/3] ARM: mediatek: add dts for mt6592-evb   Arnd Bergmann
• [PATCH 3/3] dt-bindings: add documentation for Mediatek SoC   Arnd Bergmann
• [PATCH 1/3] ARM: mediatek: Add basic support for mt6592   Arnd Bergmann
• [PATCH v2 0/7] ARM: meson: add support for Meson8   Arnd Bergmann
• [GIT PULL 0/7] ARM: SoC changes for 3.18   Arnd Bergmann
• [GIT PULL 1/7] ARM: SoC non-critical bug fixes for 3.18   Arnd Bergmann
• [GIT PULL 2/7] ARM: SoC cleanups for 3.18   Arnd Bergmann
• [GIT PULL 3/7] ARM: SoC platform changes for 3.18   Arnd Bergmann
• [GIT PULL 4/7] ARM: SoC DT updates for 3.18   Arnd Bergmann
• [GIT PULL 5/7] ARM: SoC driver updates for 3.18   Arnd Bergmann
• [GIT PULL 0/7] ARM: SoC defconfig changes for 3.18   Arnd Bergmann
• [GIT PULL 0/7] ARM: SoC defconfig changes for 3.18   Arnd Bergmann
• [GIT PULL 7/7] ARM64: SoC changes for 3.18   Arnd Bergmann
• [PATCH 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Arnd Bergmann
• [PATCH] vfio/pci: make MSI handling optional   Arnd Bergmann
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Arnd Bergmann
• [PATCH] ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board   Arnd Bergmann
• [PATCH v2 0/6] UIO driver for APM X-Gene QMTM   Arnd Bergmann
• [PATCH v1 1/3] gpio: Add APM X-Gene standby GPIO controller driver   Arnd Bergmann
• [PATCH v3 4/7] ARM: mediatek: Add sysirq interrupt polarity support   Arnd Bergmann
• [PATCH v3 3/7] irqchip: gic: Support hierarchy irq domain.   Arnd Bergmann
• [PATCH] ARM: qcom: Increase MMC_BLOCK_MINORS in defconfig   Arnd Bergmann
• arm64 non-SMP build error in latest upstream kernel   Arnd Bergmann
• [PATCH v1 1/3] gpio: Add APM X-Gene standby GPIO controller driver   Arnd Bergmann
• [RFC] drop owner assignment from platform_drivers   Arnd Bergmann
• FP register corruption in Exynos 4210 (Cortex-A9)   Arnd Bergmann
• [PATCH V4 1/7] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Arnd Bergmann
• [PATCH V4 7/7] ARM: multi_v7_defconfig: Enable ARCH_BCM_CYGNUS config   Arnd Bergmann
• [PATCH V4 5/7] ARM: dts: Enable Broadcom Cygnus SoC   Arnd Bergmann
• [PATCH] ARM: keystone: add bus notifier to set dma_pfn_offset for pci devices   Arnd Bergmann
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Arnd Bergmann
• [RFC] drop owner assignment from platform_drivers   Arnd Bergmann
• [RFC] drop owner assignment from platform_drivers   Arnd Bergmann
• [PATCH v4 1/2] iopoll: Introduce memory-mapped IO polling macros   Arnd Bergmann
• [PATCH v3 0/2] bus: brcmstb_gisb: misc fixes   Arnd Bergmann
• [PATCH] ARM: keystone: add bus notifier to set dma_pfn_offset for pci devices   Arnd Bergmann
• [RFC 1/7] ARM: vf610: add low level debug support for !MMU   Arnd Bergmann
• [RFC 3/7] ARM: vf610m4: add new machine and SoC for Vybrid on Cortex-M4   Arnd Bergmann
• [RFC 4/7] ARM: dts: add support for Vybrid running on Cortex-M4   Arnd Bergmann
• [RFC 6/7] ARM: vf610m4: HACK: get dtb pointer from SRC_GPR3   Arnd Bergmann
• next build: 304 warnings 0 failures (next/next-20141013)   Arnd Bergmann
• [PATCH v3 3/7] irqchip: gic: Support hierarchy irq domain.   Arnd Bergmann
• [RFC 3/7] ARM: vf610m4: add new machine and SoC for Vybrid on Cortex-M4   Arnd Bergmann
• [PATCH] vfio/pci: make MSI handling optional   Arnd Bergmann
• [PATCH v3] drivers: of: add return value to of_reserved_mem_device_init   Arnd Bergmann
• [RFC 4/7] ARM: dts: add support for Vybrid running on Cortex-M4   Arnd Bergmann
• [PATCH v3 3/7] irqchip: gic: Support hierarchy irq domain.   Arnd Bergmann
• [RFC 4/7] ARM: dts: add support for Vybrid running on Cortex-M4   Arnd Bergmann
• next build: 304 warnings 0 failures (next/next-20141013)   Arnd Bergmann
• [PATCH] arm64: compat: fix compat types affecting struct compat_elf_prpsinfo   Arnd Bergmann
• [RFC 4/7] ARM: dts: add support for Vybrid running on Cortex-M4   Arnd Bergmann
• [PATCH] arm64: compat: fix compat types affecting struct compat_elf_prpsinfo   Arnd Bergmann
• [RFC PATCH v3 6/7] arm: call iommu_init before of_platform_populate   Arnd Bergmann
• [PATCH] arm64: compat: fix compat types affecting struct compat_elf_prpsinfo   Arnd Bergmann
• [PATCHv5 1/6] ARM: dts: Add SoC level device tree support for LS1021A   Arnd Bergmann
• [PATCH v6] ARM: clocksource: add asm9260_timer driver   Arnd Bergmann
• [PATCHv2 0/3] Remove mach/atmel-mci.h   Arnd Bergmann
• [PATCH v2 2/3] ARM: zynq: Enable generic allocator   Arnd Bergmann
• [PATCH v2 1/3] ARM: zynq: Move common.h to generic location   Arnd Bergmann
• [PATCH] arm: fix flush_pfn_alias   Arnd Bergmann
• [PATCH v2 1/5] Documentation: DT: Renamed of-serial.txt to 8250.txt   Arnd Bergmann
• [PATCH v2 2/5] Documentation: DT: Add bindings for Spreadtrum Sharkl Platform   Arnd Bergmann
• [GIT PULL] ARM: berlin: Driver changes for v3.18   Arnd Bergmann
• [PATCH RFC V3 2/3] mxs: add driver for ocotp in i.MX23 and i.MX28   Arnd Bergmann
• [PATCH RFC V3 2/3] mxs: add driver for ocotp in i.MX23 and i.MX28   Arnd Bergmann
• [PATCH 2/6] arm64: Add DTS support for Spreadtrum's Shark64 SoC   Arnd Bergmann
• [Linaro-mm-sig] [PATCH v4] drivers: of: add return value to of_reserved_mem_device_init   Arnd Bergmann
• [PATCH 1/2] clocksource: enable pxa_timer for SA-1100 platform   Arnd Bergmann
• [PATCH v4] dma: Add Xilinx AXI Direct Memory Access Engine driver support   Arnd Bergmann
• [PATCH] ARM: debug: move StrongARM debug include to arch/arm/include/debug   Arnd Bergmann
• [PATCH v5 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Arnd Bergmann
• [GIT PULL] ARM: brcmstb: SMP, Kconfig, earlyprintk and GISB fixes   Arnd Bergmann
• [PATCH v5 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Arnd Bergmann
• [PATCH v4] dma: Add Xilinx AXI Direct Memory Access Engine driver support   Arnd Bergmann
• [PATCH] genirq: Introduce irq_read_line()   Arnd Bergmann
• [PATCH v3 5/6] Documentation: dt-bindings: Add binding info for X-Gene QMTM UIO driver   Arnd Bergmann
• [PATCH] serial: of-serial: fix uninitialized kmalloc variable   Arnd Bergmann
• [PATCH] ARM: dts: DRA7: Add aliases for all serial ports   Arnd Bergmann
• [PATCH v5 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Arnd Bergmann
• [PATCH V2 1/2] ARM: pxa: spitz: register spitz-audio device   Arnd Bergmann
• [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator   Arnd Bergmann
• [PATCH v2 11/18] iommu: exynos: remove useless device_add/remove callbacks   Arnd Bergmann
• [GIT PULL] arm: pxa: fixes against v3.18-rc1   Arnd Bergmann
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Arnd Bergmann
• [PATCH v2 2/2] arm: pm: add deep sleep support for LS1   Arnd Bergmann
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Arnd Bergmann
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Arnd Bergmann
• [PATCH v2 11/18] iommu: exynos: remove useless device_add/remove callbacks   Arnd Bergmann
• [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog   Arnd Bergmann
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Arnd Bergmann
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Arnd Bergmann
• [PATCH v2] MAINTAINERS: Add myself as reviewer for Zynq   Arnd Bergmann
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Arnd Bergmann
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Arnd Bergmann
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Arnd Bergmann
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   Arnd Bergmann
• gcc 4.9 build warnings (was: Re: arm-soc build: 2917 warnings 0 failures (arm-soc/v3.18-rc1-20-g06c0773))   Arnd Bergmann
• [PATCH RFC 1/2] drivers: pci: fix window allocation order wrt bus_range filtering   Arnd Bergmann
• gcc 4.9 build warnings (was: Re: arm-soc build: 2917 warnings 0 failures (arm-soc/v3.18-rc1-20-g06c0773))   Arnd Bergmann
• gcc 4.9 build warnings (was: Re: arm-soc build: 2917 warnings 0 failures (arm-soc/v3.18-rc1-20-g06c0773))   Arnd Bergmann
• [PATCH v1 1/3] gpio: Add APM X-Gene standby GPIO controller driver   Arnd Bergmann
• [PATCH v4] dma: Add Xilinx AXI Direct Memory Access Engine driver support   Arnd Bergmann
• [PATCH v12 00/15] arm: Fix DEBUG_LL for multi-platform kernels (without PL01X)   Arnd Bergmann
• Unconditional registering EMDA platform devices   Arnd Bergmann
• Unconditional registering EMDA platform devices   Arnd Bergmann
• [PATCHv0] arm: mvebu: add .dts file for Synology DS213j   Arnd Bergmann
• [PATCH V2] arm64: amd-seattle: Adding device tree for AMD Seattle platform   Arnd Bergmann
• [PATCH] arm64: ARCH_PFN_OFFSET should be unsigned long   Arnd Bergmann
• [PATCH v2 1/5] ARM: introduce a CONFIG_ARCH_MULTIPLATFORM_STRICT Kconfig option   Arnd Bergmann
• [PATCH v2 4/5] ARM: allow errata and XIP options to be enabled without ARCH_MULTIPLATFORM_STRICT   Arnd Bergmann
• [PATCH v2 5/5] ARM: use early console instead of early debug in allmodconfig kernels   Arnd Bergmann
• [PATCH v2 3/5] ARM: restrict CPU_BIG_ENDIAN configuration option   Arnd Bergmann
• [PATCH v2 4/5] ARM: allow errata and XIP options to be enabled without ARCH_MULTIPLATFORM_STRICT   Arnd Bergmann
• [PATCH v2 5/5] ARM: use early console instead of early debug in allmodconfig kernels   Arnd Bergmann
• [PATCH v2 4/5] ARM: allow errata and XIP options to be enabled without ARCH_MULTIPLATFORM_STRICT   Arnd Bergmann
• [PATCH v2 3/5] ARM: restrict CPU_BIG_ENDIAN configuration option   Arnd Bergmann
• [PATCH v7 4/7] ARM: dts: Enable Broadcom Cygnus SoC   Arnd Bergmann
• [PATCH RFC V3 2/3] mxs: add driver for ocotp in i.MX23 and i.MX28   Arnd Bergmann
• [PATCH v8 8/8] ARM: multi_v7_defconfig: Enable Broadcom Cygnus   Arnd Bergmann
• [PATCH v8 8/8] ARM: multi_v7_defconfig: Enable Broadcom Cygnus   Arnd Bergmann
• [PATCH v2] MAINTAINERS: Add myself as reviewer for Zynq   Arnd Bergmann
• [PATCH] ARM: ixp4xx: remove compilation warnings in io.h   Arnd Bergmann
• [PATCH] ARM: multi_v7_defconfig: fix support for APQ8084   Arnd Bergmann
• [PATCH] ARM: socfpga_defconfig: Update defconfig for SoCFPGA   Arnd Bergmann
• [PATCH v1 1/3] gpio: Add APM X-Gene standby GPIO controller driver   Arnd Bergmann
• [PATCH v1 1/3] gpio: Add APM X-Gene standby GPIO controller driver   Arnd Bergmann
• [PATCH v2 0/4] Add support for pxa27x device-tree machine   Arnd Bergmann
• [PATCH 2/3] dt-bindings: Add Reset Controller for MediaTek SoC   Arnd Bergmann
• [PATCH 3/3] ARM: dts: mt8135: Add Reset Controller for MediaTek SoC   Arnd Bergmann
• [PATCH v1 1/2] dtb: xgene: fix: Disable 10GbE and SGMII based 1GbE by default   Arnd Bergmann
• [RFC PATCH 2/2] arm: pcibios: move to generic PCI domains   Arnd Bergmann
• [PATCH v7 1/2] iopoll: Introduce memory-mapped IO polling macros   Arnd Bergmann
• [PATCH] watchdog: at91rm9200: allow building when using device tree   Arnd Bergmann
• [PATCH] watchdog: at91rm9200: allow building when using device tree   Arnd Bergmann
• [PATCH 1/2] [usb] make xhci platform driver use 64 bit or 32 bit DMA   Arnd Bergmann
• [PATCH 2/2] [usb] add support for APM X-Gene to xhci-platform   Arnd Bergmann
• [RFC PATCH 0/2] arm: pcibios: remove pci_sys_data domain   Arnd Bergmann
• [RFC PATCH 0/2] arm: pcibios: remove pci_sys_data domain   Arnd Bergmann
• [PATCH 2/2] [usb] add support for APM X-Gene to xhci-platform   Arnd Bergmann
• [PATCH 1/2] [usb] make xhci platform driver use 64 bit or 32 bit DMA   Arnd Bergmann
• [PATCH 1/2] [usb] make xhci platform driver use 64 bit or 32 bit DMA   Arnd Bergmann
• [PATCH RESEND] tty: serial: 8250_mtk: Fix quot calculation   Arnd Bergmann
• [PATCH 1/2] [usb] make xhci platform driver use 64 bit or 32 bit DMA   Arnd Bergmann
• [PATCH 1/3] ARM: Add default SPARSEMEM settings   Arnd Bergmann
• [PATCH 3/3] ARM: Allow either FLATMEM or SPARSEMEM on the multi-v7 build   Arnd Bergmann
• [PATCH 1/2] ARM: at91: rm9200 add system timer resources to watchdog   Arnd Bergmann
• [PATCH 2/2] watchdog: at91rm9200 remove mach/ header dependency   Arnd Bergmann
• [PATCH 1/2] ARM: at91: rm9200 add system timer resources to watchdog   Arnd Bergmann
• [PATCH v4 05/12] memory: Add NVIDIA Tegra memory controller support   Terje Bergström
• [PATCH v4 05/12] memory: Add NVIDIA Tegra memory controller support   Terje Bergström
• [PATCH v4 05/12] memory: Add NVIDIA Tegra memory controller support   Terje Bergström
• [PATCH v4 1/3] power-domain: add power domain drivers for Rockchip platform   Varka Bhadram
• [PATCH v6 1/2] mtd: nand: add sunxi NAND flash controller support   Varka Bhadram
• [PATCH v3 4/6] uio: Add X-Gene QMTM UIO driver   Varka Bhadram
• [PATCH v3 4/6] uio: Add X-Gene QMTM UIO driver   Varka Bhadram
• [PATCH arm-soc 0/2] remove duplicate check on resource   Varka Bhadram
• [PATCH arm-soc 1/2] mach-omap2: gpmc: remove duplicate check on resource   Varka Bhadram
• [PATCH arm-soc 2/2] plat-omap: dmtimer: remove duplicate check on resource   Varka Bhadram
• [PATCH arm-soc 0/2] remove duplicate check on resource   Varka Bhadram
• [PATCH v2] arm64/efi: efistub: jump to 'stext' directly, not through the header   Ard Biesheuvel
• [PATCH v2] arm64/efi: efistub: jump to 'stext' directly, not through the header   Ard Biesheuvel
• FP register corruption in Exynos 4210 (Cortex-A9)   Ard Biesheuvel
• FP register corruption in Exynos 4210 (Cortex-A9)   Ard Biesheuvel
• FP register corruption in Exynos 4210 (Cortex-A9)   Ard Biesheuvel
• [PATCH v2] arm/arm64: KVM: map MMIO regions at creation time   Ard Biesheuvel
• [PATCH v2] arm/arm64: KVM: map MMIO regions at creation time   Ard Biesheuvel
• [PATCH v3] arm64/efi: efistub: jump to 'stext' directly, not through the header   Ard Biesheuvel
• [RFC PATCH] arm64/efi: use stable virtual mappings for UEFI runtime services   Ard Biesheuvel
• [PATCH v2] arm/arm64: KVM: map MMIO regions at creation time   Ard Biesheuvel
• [PATCH 0/7] arm64 kexec kernel patches V3   Ard Biesheuvel
• [PATCH v2] arm/arm64: KVM: map MMIO regions at creation time   Ard Biesheuvel
• [PATCH 2/6] arm/arm64: KVM: fix potential NULL dereference in user_mem_abort()   Ard Biesheuvel
• [PATCH 3/6] arm/arm64: KVM: add 'writable' parameter to kvm_phys_addr_ioremap   Ard Biesheuvel
• [PATCH v3] arm/arm64: KVM: map MMIO regions at creation time   Ard Biesheuvel
• [PATCH v3] arm64/efi: efistub: jump to 'stext' directly, not through the header   Ard Biesheuvel
• [PATCH v3] arm64/efi: efistub: jump to 'stext' directly, not through the header   Ard Biesheuvel
• [PATCH] arm64/efi: set PE/COFF section alignment to 4 KB   Ard Biesheuvel
• [PATCH] arm64/efi: set PE/COFF section alignment to 4 KB   Ard Biesheuvel
• [PATCH v3] arm64/efi: efistub: jump to 'stext' directly, not through the header   Ard Biesheuvel
• [PATCH v3] arm64/efi: efistub: jump to 'stext' directly, not through the header   Ard Biesheuvel
• [PATCH v3] arm/arm64: KVM: map MMIO regions at creation time   Ard Biesheuvel
• [PATCH v3] arm64/efi: efistub: jump to 'stext' directly, not through the header   Ard Biesheuvel
• [PATCH v3] arm64/efi: efistub: jump to 'stext' directly, not through the header   Ard Biesheuvel
• [PATCH] arm64/efi: set PE/COFF section alignment to 4 KB   Ard Biesheuvel
• [PATCH v3] arm/arm64: KVM: map MMIO regions at creation time   Ard Biesheuvel
• [PATCH v4] arm/arm64: KVM: map MMIO regions at creation time   Ard Biesheuvel
• [PATCH v3] arm64/efi: efistub: jump to 'stext' directly, not through the header   Ard Biesheuvel
• [PATCH] arm64/efi: set PE/COFF section alignment to 4 KB   Ard Biesheuvel
• [PATCH] arm64/efi: set PE/COFF file alignment to 512 bytes   Ard Biesheuvel
• [RFC PATCH] arm64/efi: use stable virtual mappings for UEFI runtime services   Ard Biesheuvel
• [RFC PATCH] arm64/efi: use stable virtual mappings for UEFI runtime services   Ard Biesheuvel
• [RFC PATCH] arm64/efi: use stable virtual mappings for UEFI runtime services   Ard Biesheuvel
• [PATCH] arm64/efi: set PE/COFF file alignment to 512 bytes   Ard Biesheuvel
• [PATCH] efi: efi-stub: notify on DTB absence   Ard Biesheuvel
• [PATCH] arm64/crypto: use crypto instructions for generating AES key schedule   Ard Biesheuvel
• [PATCH] arm64/efi: set PE/COFF file alignment to 512 bytes   Ard Biesheuvel
• [PATCH 00/10] arm64 EFI patches for 3.19   Ard Biesheuvel
• [PATCH 01/10] arm64/efi: efistub: jump to 'stext' directly, not through the header   Ard Biesheuvel
• [PATCH 02/10] arm64/efi: set PE/COFF section alignment to 4 KB   Ard Biesheuvel
• [PATCH 03/10] arm64/efi: set PE/COFF file alignment to 512 bytes   Ard Biesheuvel
• [PATCH 04/10] arm64/efi: reserve regions of type ACPI_MEMORY_NVS   Ard Biesheuvel
• [PATCH 05/10] arm64/efi: drop redundant set_bit(EFI_CONFIG_TABLES)   Ard Biesheuvel
• [PATCH 06/10] arm64/efi: use UEFI memory map unconditionally if available   Ard Biesheuvel
• [PATCH 07/10] efi: dmi: add support for SMBIOS 3.0 UEFI configuration table   Ard Biesheuvel
• [PATCH 08/10] dmi: add support for SMBIOS 3.0 64-bit entry point   Ard Biesheuvel
• [PATCH 09/10] arm64: dmi: Add SMBIOS/DMI support   Ard Biesheuvel
• [PATCH 10/10] arm64: dmi: set DMI string as dump stack arch description   Ard Biesheuvel
• [PATCH] arm64/crypto: use crypto instructions for generating AES key schedule   Ard Biesheuvel
• [PATCH 04/10] arm64/efi: reserve regions of type ACPI_MEMORY_NVS   Ard Biesheuvel
• [PATCH] arm64/crypto: use crypto instructions for generating AES key schedule   Ard Biesheuvel
• [PATCH 06/10] arm64/efi: use UEFI memory map unconditionally if available   Ard Biesheuvel
• [PATCH 06/10] arm64/efi: use UEFI memory map unconditionally if available   Ard Biesheuvel
• [PATCH 06/10] arm64/efi: use UEFI memory map unconditionally if available   Ard Biesheuvel
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Ard Biesheuvel
• gcc 4.9 build warnings (was: Re: arm-soc build: 2917 warnings 0 failures (arm-soc/v3.18-rc1-20-g06c0773))   Ard Biesheuvel
• gcc 4.9 build warnings (was: Re: arm-soc build: 2917 warnings 0 failures (arm-soc/v3.18-rc1-20-g06c0773))   Ard Biesheuvel
• [PATCH 0/6] arm64: stable UEFI mappings for kexec   Ard Biesheuvel
• [PATCH 1/6] arm64/mm: add explicit struct_mm argument to __create_mapping()   Ard Biesheuvel
• [PATCH 2/6] arm64/mm: add create_pgd_mapping() to create private page tables   Ard Biesheuvel
• [PATCH 3/6] efi: split off remapping code from efi_config_init()   Ard Biesheuvel
• [PATCH 4/6] arm64/efi: move SetVirtualAddressMap() to UEFI stub   Ard Biesheuvel
• [PATCH 5/6] arm64/efi: remove free_boot_services() and friends   Ard Biesheuvel
• [PATCH 6/6] arm64/efi: remove idmap manipulations from UEFI code   Ard Biesheuvel
• gcc 4.9 build warnings (was: Re: arm-soc build: 2917 warnings 0 failures (arm-soc/v3.18-rc1-20-g06c0773))   Ard Biesheuvel
• [PATCH 4/6] arm64/efi: move SetVirtualAddressMap() to UEFI stub   Ard Biesheuvel
• [PATCH 6/6] arm64/efi: remove idmap manipulations from UEFI code   Ard Biesheuvel
• [PATCH 2/6] arm64/mm: add create_pgd_mapping() to create private page tables   Ard Biesheuvel
• [PATCH 00/10] arm64 EFI patches for 3.19   Ard Biesheuvel
• [PATCH 10/10] arm64: dmi: set DMI string as dump stack arch description   Ard Biesheuvel
• [PATCH 07/10] efi: dmi: add support for SMBIOS 3.0 UEFI configuration table   Ard Biesheuvel
• [PATCH 4/6] arm64/efi: move SetVirtualAddressMap() to UEFI stub   Ard Biesheuvel
• [PATCHv4 3/7] arm64: Move cpu_resume into the text section   Ard Biesheuvel
• [PATCHv4 1/7] arm64: Treat handle_arch_irq as a function pointer   Ard Biesheuvel
• [PATCHv4 3/7] arm64: Move cpu_resume into the text section   Ard Biesheuvel
• [PATCHv4 2/7] arm64: Switch to ldr for loading the stub vectors   Ard Biesheuvel
• [PATCHv4 4/7] arm64: Move some head.text functions to executable section   Ard Biesheuvel
• [PATCH 04/10] arm64/efi: reserve regions of type ACPI_MEMORY_NVS   Ard Biesheuvel
• [PATCHv4 7/7] arm64: add better page protections to arm64   Ard Biesheuvel
• [PATCH] arm64/dt: add machine name to kernel call stack dump output   Ard Biesheuvel
• [PATCH v2 00/10] arm64 EFI patches for 3.19   Ard Biesheuvel
• [PATCH v2 01/10] arm64/efi: efistub: jump to 'stext' directly, not through the header   Ard Biesheuvel
• [PATCH v2 02/10] arm64/efi: set PE/COFF section alignment to 4 KB   Ard Biesheuvel
• [PATCH v2 03/10] arm64/efi: set PE/COFF file alignment to 512 bytes   Ard Biesheuvel
• [PATCH v2 04/10] arm64/efi: invert UEFI memory region reservation logic   Ard Biesheuvel
• [PATCH v2 05/10] arm64/efi: drop redundant set_bit(EFI_CONFIG_TABLES)   Ard Biesheuvel
• [PATCH v2 06/10] efi: dmi: add support for SMBIOS 3.0 UEFI configuration table   Ard Biesheuvel
• [PATCH v2 07/10] dmi: add support for SMBIOS 3.0 64-bit entry point   Ard Biesheuvel
• [PATCH v2 08/10] arm64: dmi: Add SMBIOS/DMI support   Ard Biesheuvel
• [PATCH v2 09/10] arm64: dmi: set DMI string as dump stack arch description   Ard Biesheuvel
• [PATCH v2 10/10] efi: efi-stub: notify on DTB absence   Ard Biesheuvel
• [PATCH v2 04/10] arm64/efi: invert UEFI memory region reservation logic   Ard Biesheuvel
• [PATCH v2] dmi: add support for SMBIOS 3.0 64-bit entry point   Ard Biesheuvel
• [RFC V5 3/3] arm64:add bitrev.h file to support rbit instruction   Ard Biesheuvel
• DMA allocations from CMA and fatal_signal_pending check   Maxime Bizon
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Segher Boessenkool
• [PATCH 0/4] Remove optional dependencies on PLAT_S5P   Paul Bolle
• [PATCH 2/4] [media] exynos4-is: Remove optional dependency on PLAT_S5P   Paul Bolle
• [PATCH 3/4] [media] Remove optional dependency on PLAT_S5P   Paul Bolle
• [PATCH 3/4] [media] Remove optional dependency on PLAT_S5P   Paul Bolle
• [PATCH 3/4] [media] Remove optional dependency on PLAT_S5P   Paul Bolle
• [PATCH v2] [media] Remove references to non-existent PLAT_S5P symbol   Paul Bolle
• [RFC PATCH 0/2] mfd: syscon: declare holes in syscon register maps   Seraphin Bonnaffe
• [RFC PATCH 1/2] mfd: syscon: Document new DT binding "holes"   Seraphin Bonnaffe
• [RFC PATCH 2/2] mfd: syscon: specify rd_table and wr_table from DT   Seraphin Bonnaffe
• [PATCH] net: bpf: arm64: minor fix of type in jited   Daniel Borkmann
• Samsung/S3C6410: CCF/clock for the built-in NAND controller fails   Juergen Borleis
• [PATCH v12 0/6] arm/KVM: dirty page logging support for ARMv7 (3.17.0-rc1)   Christian Borntraeger
• [PATCH 2/4] ARM: qcom: add description of KPSS WDT for IPQ8064   Stephen Boyd
• [PATCH 2/3] ARM: vfp: fix VFPv3 hwcap detection on non-ARM vfp implementations   Stephen Boyd
• [PATCH 2/3] ARM: vfp: fix VFPv3 hwcap detection on non-ARM vfp implementations   Stephen Boyd
• [PATCH v7 4/7] qcom: pm: Add cpu low power mode functions   Stephen Boyd
• [PATCH 2/4] ARM: qcom: add description of KPSS WDT for IPQ8064   Stephen Boyd
• [RFC 5/7] soc: qcom: Add Shared Memory Driver   Stephen Boyd
• [PATCH v2 04/15] clk: divider: Make generic for usage elsewhere   Stephen Boyd
• [PATCH to be tested] serial: msm_serial: add missing sysrq handling   Stephen Boyd
• [PATCH 1/2] clk: Make clk API return per-user struct clk instances   Stephen Boyd
• [PATCH 1/2] clk: Make clk API return per-user struct clk instances   Stephen Boyd
• [PATCH v2 04/15] clk: divider: Make generic for usage elsewhere   Stephen Boyd
• [PATCH 1/2] clk: Make clk API return per-user struct clk instances   Stephen Boyd
• [PATCH 2/4] ARM: qcom: add description of KPSS WDT for IPQ8064   Stephen Boyd
• [PATCH v8 2/7] arm: dts: qcom: Add power-controller device node for 8974 Krait CPUs   Stephen Boyd
• [PATCH v2 4/4] clk: Use ww_mutexes for clk_prepare_{lock/unlock}   Stephen Boyd
• [PATCH v8 1/7] qcom: spm: Add Subsystem Power Manager driver   Stephen Boyd
• [PATCH v8 4/7] qcom: pm: Add cpu low power mode functions   Stephen Boyd
• [PATCH v8 5/7] qcom: cpuidle: Add cpuidle driver for QCOM cpus   Stephen Boyd
• [PATCH v2 6/8] clk: Change clk_ops->determine_rate to return a clk_hw as the best parent   Stephen Boyd
• [PATCH v2 0/8] Per-user clock constraints   Stephen Boyd
• [PATCH v8 4/7] qcom: pm: Add cpu low power mode functions   Stephen Boyd
• [PATCH v8 4/7] qcom: pm: Add cpu low power mode functions   Stephen Boyd
• [PATCH v8 1/7] qcom: spm: Add Subsystem Power Manager driver   Stephen Boyd
• [PATCH v3 6/8] clk: Change clk_ops->determine_rate to return a clk_hw as the best parent   Stephen Boyd
• [PATCH v3 7/8] clk: Make clk API return per-user struct clk instances   Stephen Boyd
• [PATCH v2 4/4] clk: Use ww_mutexes for clk_prepare_{lock/unlock}   Stephen Boyd
• [PATCH v2 0/3] VFP fixes   Stephen Boyd
• [PATCH v2 1/3] ARM: vfp: Workaround bad MVFR1 register on some Kraits   Stephen Boyd
• [PATCH v2 2/3] ARM: vfp: Fix VFPv3 hwcap detection on CPUID based cpus   Stephen Boyd
• [PATCH v2 3/3] arm: vfp: Bounce undefined instructions in vectored mode   Stephen Boyd
• [PATCH] tty: serial: msm: Fix lock init issue with earlycon   Stephen Boyd
• [PATCH] tty: serial: msm: Fix lock init issue with earlycon   Stephen Boyd
• [PATCH] tty: serial: msm: Fix lock init issue with earlycon   Stephen Boyd
• [PATCH 7/8] arm: perf: dynamically allocate cpu hardware data   Stephen Boyd
• [PATCH 2/8] arm: perf: make PMU probing data-driven   Stephen Boyd
• [PATCH 3/8] arm: perf: use IDR types for CPU PMUs   Stephen Boyd
• [PATCH v4 6/8] clk: Change clk_ops->determine_rate to return a clk_hw as the best parent   Stephen Boyd
• [PATCH 6/8] arm: perf: fold percpu_pmu into pmu_hw_events   Stephen Boyd
• [PATCH 8/8] arm: perf: fold hotplug notifier into arm_pmu   Stephen Boyd
• [PATCH] RFC: add function for localbus address   Stephen Boyd
• [PATCH] RFC: add function for localbus address   Stephen Boyd
• [PATCH] tty: serial: msm_serial: Use DT aliases   Stephen Boyd
• [PATCH] clocksource: arm_arch_timer: Don't wait for probe of unexisting timers   Stephen Boyd
• PROBLEM: BUG appearing when trying to allocate interrupt on Exynos MCT after CPU hotplug   Stephen Boyd
• [PATCH] soc: qcom: scm: Clarify boot interface   Stephen Boyd
• [PATCH] genirq: Introduce irq_read_line()   Stephen Boyd
• [PATCH v2 2/3] ARM: vfp: Fix VFPv3 hwcap detection on CPUID based cpus   Stephen Boyd
• PROBLEM: BUG appearing when trying to allocate interrupt on Exynos MCT after CPU hotplug   Stephen Boyd
• [PATCH 3/8] arm: perf: use IDR types for CPU PMUs   Stephen Boyd
• [PATCHv2 2/9] arm: perf: add missing pr_info newlines   Stephen Boyd
• [PATCHv2 8/9] arm: perf: dynamically allocate cpu hardware data   Stephen Boyd
• [PATCHv2 9/9] arm: perf: fold hotplug notifier into arm_pmu   Stephen Boyd
• [PATCHv2 6/9] arm: perf: kill get_hw_events()   Stephen Boyd
• [PATCHv2 3/9] arm: perf: make PMU probing data-driven   Stephen Boyd
• [PATCHv2 5/9] arm: perf: limit size of accounting data   Stephen Boyd
• [PATCH] genirq: Introduce irq_read_line()   Stephen Boyd
• [RFC/PATCH] ARM: Expose cpuid registers to userspace   Stephen Boyd
• [PATCH v2 2/3] ARM: vfp: Fix VFPv3 hwcap detection on CPUID based cpus   Stephen Boyd
• [RFC/PATCH] ARM: Expose cpuid registers to userspace   Stephen Boyd
• [PATCH 0/2] Two msm_serial break fixes   Stephen Boyd
• [PATCH 1/2] tty: serial: msm: Fix sysrq spinlock recursion on non-DM   Stephen Boyd
• [PATCH 2/2] tty: serial: msm: Support sysrq on uartDM devices   Stephen Boyd
• [PATCH] tty: serial: msm: Reset uartdm after baud rate change   Stephen Boyd
• [PATCH 2/2] tty: serial: msm: Support sysrq on uartDM devices   Stephen Boyd
• [PATCH V3 0/6] Add initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH 2/6] clk: Clock driver support for Broadcom Cygnus SoC   Scott Branden
• [PATCH 3/6] dt-bindings: Document Broadcom Cygnus SoC and clock driver   Scott Branden
• [PATCH 4/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC   Scott Branden
• [PATCH 5/6] ARM: dts: Enable Broadcom Cygnus SoC   Scott Branden
• [PATCH 6/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers   Scott Branden
• [PATCH 3/6] dt-bindings: Document Broadcom Cygnus SoC and clock driver   Scott Branden
• [PATCH 4/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC   Scott Branden
• [PATCH 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH V4 0/7] Add initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH V4 1/7] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH V4 2/7] clk: Clock driver support for Broadcom Cygnus SoC   Scott Branden
• [PATCH V4 3/7] dt-bindings: Document Broadcom Cygnus SoC and clock driver   Scott Branden
• [PATCH V4 4/7] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC   Scott Branden
• [PATCH V4 5/7] ARM: dts: Enable Broadcom Cygnus SoC   Scott Branden
• [PATCH V4 6/7] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers   Scott Branden
• [PATCH V4 7/7] ARM: multi_v7_defconfig: Enable ARCH_BCM_CYGNUS config   Scott Branden
• [PATCH V4 6/7] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers   Scott Branden
• [PATCH V4 1/7] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH V4 5/7] ARM: dts: Enable Broadcom Cygnus SoC   Scott Branden
• [PATCH V4 7/7] ARM: multi_v7_defconfig: Enable ARCH_BCM_CYGNUS config   Scott Branden
• [PATCH v5 0/6] Add initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH v5 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH v5 2/6] dt-bindings: Document Broadcom Cygnus SoC and clocks   Scott Branden
• [PATCH v5 3/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC   Scott Branden
• [PATCH v5 4/6] ARM: dts: Enable Broadcom Cygnus SoC   Scott Branden
• [PATCH v5 5/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture   Scott Branden
• [PATCH v5 6/6] ARM: mach-bcm: Consolidate currently supported IPROC SoCs   Scott Branden
• [PATCH v5 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH v5 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH v6 0/6] Add initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH v6 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH v6 2/6] dt-bindings: Document Broadcom Cygnus SoC and clocks   Scott Branden
• [PATCH v6 3/6] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC   Scott Branden
• [PATCH v6 4/6] ARM: dts: Enable Broadcom Cygnus SoC   Scott Branden
• [PATCH v6 5/6] MAINTAINERS: Entry for Cygnus/iproc arm architecture   Scott Branden
• [PATCH v6 6/6] ARM: mach-bcm: Consolidate currently supported IPROC SoCs   Scott Branden
• [PATCH v5 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH v7 0/7] Add initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH v7 1/7] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH v7 2/7] dt-bindings: Document Broadcom Cygnus SoC and clocks   Scott Branden
• [PATCH v7 3/7] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC   Scott Branden
• [PATCH v7 4/7] ARM: dts: Enable Broadcom Cygnus SoC   Scott Branden
• [PATCH v7 5/7] MAINTAINERS: Entry for Cygnus/iproc arm architecture   Scott Branden
• [PATCH v7 6/7] ARM: mach-bcm: Consolidate currently supported IPROC SoCs   Scott Branden
• [PATCH v7 7/7] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig   Scott Branden
• [PATCH v7 4/7] ARM: dts: Enable Broadcom Cygnus SoC   Scott Branden
• [PATCH v8 0/8] Add initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH v8 1/8] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH v8 2/8] dt-bindings: Document Broadcom Cygnus SoC and clocks   Scott Branden
• [PATCH v8 3/8] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC   Scott Branden
• [PATCH v8 4/8] ARM: dts: Enable Broadcom Cygnus SoC   Scott Branden
• [PATCH v8 5/8] MAINTAINERS: Entry for Cygnus/iproc arm architecture   Scott Branden
• [PATCH v8 6/8] ARM: mach-bcm: Consolidate currently supported IPROC SoCs   Scott Branden
• [PATCH v8 7/8] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig   Scott Branden
• [PATCH v8 8/8] ARM: multi_v7_defconfig: Enable Broadcom Cygnus   Scott Branden
• [PATCH v8 8/8] ARM: multi_v7_defconfig: Enable Broadcom Cygnus   Scott Branden
• [PATCH v9 0/8] Add initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH v9 1/8] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Scott Branden
• [PATCH v9 2/8] dt-bindings: Document Broadcom Cygnus SoC and clocks   Scott Branden
• [PATCH v9 3/8] ARM: cygnus defconfig : Initial defconfig for Broadcom Cygnus SoC   Scott Branden
• [PATCH v9 4/8] ARM: dts: Enable Broadcom Cygnus SoC   Scott Branden
• [PATCH v9 5/8] MAINTAINERS: Entry for Cygnus/iproc arm architecture   Scott Branden
• [PATCH v9 6/8] ARM: mach-bcm: Consolidate currently supported IPROC SoCs   Scott Branden
• [PATCH v9 7/8] ARM: mach-bcm: ARCH_BCM_MOBILE: remove one level of menu from Kconfig   Scott Branden
• [PATCH v9 8/8] ARM: multi_v7_defconfig: Enable Broadcom Cygnus   Scott Branden
• [PATCH 1/2] mailbox: Avoid NULL-pointer dereference in mbox_chan_received_data()   Jassi Brar
• [PATCH RESEND V4 0/9] Tegra xHCI support   Andrew Bresticker
• [PATCH RESEND V4 1/9] of: Add NVIDIA Tegra XUSB mailbox binding   Andrew Bresticker
• [PATCH RESEND V4 2/9] mailbox: Add NVIDIA Tegra XUSB mailbox driver   Andrew Bresticker
• [PATCH RESEND V4 3/9] of: Update Tegra XUSB pad controller binding for USB   Andrew Bresticker
• [PATCH RESEND V4 4/9] pinctrl: tegra-xusb: Add USB PHY support   Andrew Bresticker
• [PATCH RESEND V4 5/9] of: Add NVIDIA Tegra xHCI controller binding   Andrew Bresticker
• [PATCH RESEND V4 6/9] usb: xhci: Add NVIDIA Tegra xHCI host-controller driver   Andrew Bresticker
• [PATCH RESEND V4 7/9] ARM: tegra: Add Tegra124 XUSB mailbox and xHCI controller   Andrew Bresticker
• [PATCH RESEND V4 8/9] ARM: tegra: jetson-tk1: Add xHCI support   Andrew Bresticker
• [PATCH RESEND V4 9/9] ARM: tegra: venice2: Add xHCI support   Andrew Bresticker
• [PATCH RESEND V4 5/9] of: Add NVIDIA Tegra xHCI controller binding   Andrew Bresticker
• [PATCH RESEND V4 2/9] mailbox: Add NVIDIA Tegra XUSB mailbox driver   Andrew Bresticker
• [PATCH RESEND V4 4/9] pinctrl: tegra-xusb: Add USB PHY support   Andrew Bresticker
• [PATCH RESEND V4 2/9] mailbox: Add NVIDIA Tegra XUSB mailbox driver   Andrew Bresticker
• [PATCH RESEND V4 4/9] pinctrl: tegra-xusb: Add USB PHY support   Andrew Bresticker
• [PATCH RESEND V4 5/9] of: Add NVIDIA Tegra xHCI controller binding   Andrew Bresticker
• [PATCH RESEND V4 5/9] of: Add NVIDIA Tegra xHCI controller binding   Andrew Bresticker
• [PATCH 1/2] mailbox: Avoid NULL-pointer dereference in mbox_chan_received_data()   Andrew Bresticker
• [PATCH 2/2] mailbox: Don't unnecessarily re-arm the polling timer   Andrew Bresticker
• [PATCH] xhci: Set shared HCD's hcd_priv in xhci_gen_setup   Andrew Bresticker
• [PATCH RESEND V4 5/9] of: Add NVIDIA Tegra xHCI controller binding   Andrew Bresticker
• [PATCH RESEND V4 3/9] of: Update Tegra XUSB pad controller binding for USB   Andrew Bresticker
• [PATCH v2 2/6] hwrng: atmel: use clk_prepapre_enable/_disable_unprepare   Boris Brezillon
• [PATCH v7 00/11] drm: add support for Atmel HLCDC Display Controller   Boris Brezillon
• [PATCH v7 01/11] mfd: add atmel-hlcdc driver   Boris Brezillon
• [PATCH v7 02/11] mfd: add documentation for atmel-hlcdc DT bindings   Boris Brezillon
• [PATCH v7 03/11] pwm: add support for atmel-hlcdc-pwm device   Boris Brezillon
• [PATCH v7 04/11] pwm: add DT bindings documentation for atmel-hlcdc-pwm driver   Boris Brezillon
• [PATCH v7 05/11] drm: add Atmel HLCDC Display Controller support   Boris Brezillon
• [PATCH v7 06/11] drm: add DT bindings documentation for atmel-hlcdc-dc driver   Boris Brezillon
• [PATCH v7 07/11] ARM: AT91/dt: split sama5d3 lcd pin definitions to match RGB mode configs   Boris Brezillon
• [PATCH v7 08/11] ARM: AT91/dt: add alternative pin muxing for sama5d3 lcd pins   Boris Brezillon
• [PATCH v7 09/11] ARM: at91/dt: define the HLCDC node available on sama5d3 SoCs   Boris Brezillon
• [PATCH v7 10/11] ARM: at91/dt: add LCD panel description to sama5d3xdm.dtsi   Boris Brezillon
• [PATCH v7 11/11] ARM: at91/dt: enable the LCD panel on sama5d3xek boards   Boris Brezillon
• [PATCH v7 00/11] drm: add support for Atmel HLCDC Display Controller   Boris Brezillon
• [PATCH v7 01/11] mfd: add atmel-hlcdc driver   Boris Brezillon
• [PATCH v7 03/11] pwm: add support for atmel-hlcdc-pwm device   Boris Brezillon
• [PATCH v7 06/11] drm: add DT bindings documentation for atmel-hlcdc-dc driver   Boris Brezillon
• [PATCH v7 10/11] ARM: at91/dt: add LCD panel description to sama5d3xdm.dtsi   Boris Brezillon
• [PATCH v7 04/11] pwm: add DT bindings documentation for atmel-hlcdc-pwm driver   Boris Brezillon
• [PATCH v7 10/11] ARM: at91/dt: add LCD panel description to sama5d3xdm.dtsi   Boris Brezillon
• [PATCH v7 06/11] drm: add DT bindings documentation for atmel-hlcdc-dc driver   Boris Brezillon
• [PATCH v7 10/11] ARM: at91/dt: add LCD panel description to sama5d3xdm.dtsi   Boris Brezillon
• [PATCH v7 06/11] drm: add DT bindings documentation for atmel-hlcdc-dc driver   Boris Brezillon
• [PATCH v9 0/2] pwm: add support for atmel-hlcdc-pwm device   Boris Brezillon
• [PATCH v9 1/2] pwm: add support for atmel-hlcdc-pwm device   Boris Brezillon
• [PATCH v9 2/2] pwm: add DT bindings documentation for atmel-hlcdc-pwm driver   Boris Brezillon
• [PATCH v10 0/2] pwm: add support for atmel-hlcdc-pwm device   Boris Brezillon
• [PATCH v10 1/2] pwm: add support for atmel-hlcdc-pwm device   Boris Brezillon
• [PATCH v10 2/2] pwm: add DT bindings documentation for atmel-hlcdc-pwm driver   Boris Brezillon
• [PATCH v3 0/3] mtd: nand: gpmi: add proper raw access support   Boris Brezillon
• [PATCH] ARM: at91/dt: sam9263: fix PLLB frequencies   Boris Brezillon
• [PATCH v3 0/3] mtd: nand: gpmi: add proper raw access support   Boris Brezillon
• [PATCH v4 0/4] mtd: nand: gpmi: add proper raw access support   Boris Brezillon
• [PATCH v4 1/4] mtd: nand: provide detailed description for raw read/write page methods   Boris Brezillon
• [PATCH v4 2/4] mtd: nand: gpmi: add gpmi_move_bits function   Boris Brezillon
• [PATCH v4 3/4] mtd: nand: gpmi: add proper raw access support   Boris Brezillon
• [PATCH v4 4/4] mtd: nand: gpmi: add raw oob access functions   Boris Brezillon
• [PATCH v6 0/2] mtd: nand: add sunxi NAND flash controller support   Boris Brezillon
• [PATCH v6 1/2] mtd: nand: add sunxi NAND flash controller support   Boris Brezillon
• [PATCH v6 2/2] mtd: nand: add sunxi NFC dt bindings doc   Boris Brezillon
• [PATCH v9 00/10] rtc: at91sam9: add DT support   Boris Brezillon
• [PATCH v6 1/2] mtd: nand: add sunxi NAND flash controller support   Boris Brezillon
• [PATCH v6 2/2] mtd: nand: add sunxi NFC dt bindings doc   Boris Brezillon
• [PATCH v7 0/2] mtd: nand: add sunxi NAND flash controller support   Boris Brezillon
• [PATCH v7 1/2] mtd: nand: add sunxi NAND flash controller support   Boris Brezillon
• [PATCH v7 2/2] mtd: nand: add sunxi NFC dt bindings doc   Boris Brezillon
• [PATCH v6 2/2] mtd: nand: add sunxi NFC dt bindings doc   Boris Brezillon
• [PATCH v6 2/2] mtd: nand: add sunxi NFC dt bindings doc   Boris Brezillon
• [PATCH v6 2/2] mtd: nand: add sunxi NFC dt bindings doc   Boris Brezillon
• [PATCH 15/26] ARM: sun6i: app4: Relicense the device tree under GPLv2/X11   Boris Brezillon
• [PATCH v2 0/8] ARM: at91: Remove mach/ includes from the reset driver   Boris Brezillon
• [PATCH v7 1/2] mtd: nand: add sunxi NAND flash controller support   Boris Brezillon
• [PATCH v7 1/2] mtd: nand: add sunxi NAND flash controller support   Boris Brezillon
• [PATCH] watchdog: at91rm9200: allow building when using device tree   Boris Brezillon
• [PATCH v2] arm: prevent BUG_ON in audit_syscall_entry()   Richard Guy Briggs
• [PATCH] ARM: zynq: Actually remove hotplug.c   Soren Brinkmann
• [PATCH RFC v2 0/8] Pinctrl support for Zynq   Soren Brinkmann
• [PATCH RFC v2 1/8] pinctrl: Add driver for Zynq   Soren Brinkmann
• [PATCH RFC v2 2/8] pinctrl: pinconf-generic: Add flag to print arguments   Soren Brinkmann
• [PATCH RFC v2 3/8] pinctrl: pinconf-generic: Add parameter 'IO standard'   Soren Brinkmann
• [PATCH RFC v2 4/8] pinctrl: zynq: Support IO standard property   Soren Brinkmann
• [PATCH RFC v2 5/8] pinctrl: zynq: Support low power mode property   Soren Brinkmann
• [PATCH RFC v2 6/8] pinctrl: pinconf-generic: Infer map type from DT property   Soren Brinkmann
• [PATCH RFC v2 7/8] pinctrl: zynq: Use generic map_all function   Soren Brinkmann
• [PATCH RFC v2 8/8] ARM: zynq: DT: Add pinctrl information   Soren Brinkmann
• [PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella   Soren Brinkmann
• [PATCH] MAINTAINERS: Update Zynq maintainer record   Soren Brinkmann
• [PATCH v2] MAINTAINERS: Add myself as reviewer for Zynq   Soren Brinkmann
• [PATCH 3/3] ARM: zynq: Extend SLCR driver to read OCM configuration   Sören Brinkmann
• [PATCH v3 1/2] ARM: zynq: Add OCM controller driver   Sören Brinkmann
• [RFC] pinctrl driver for Zynq   Sören Brinkmann
• [RFC] pinctrl driver for Zynq   Sören Brinkmann
• [PATCH 1/3] ARM: zynq: Move common.h to generic location   Sören Brinkmann
• [PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella   Sören Brinkmann
• [PATCH v2] MAINTAINERS: Add myself as reviewer for Zynq   Sören Brinkmann
• [PATCH RFC v2 8/8] ARM: zynq: DT: Add pinctrl information   Sören Brinkmann
• [PATCH RFC v2 3/8] pinctrl: pinconf-generic: Add parameter 'IO standard'   Sören Brinkmann
• [PATCH RFC v2 1/8] pinctrl: Add driver for Zynq   Sören Brinkmann
• [PATCH RFC v2 1/8] pinctrl: Add driver for Zynq   Sören Brinkmann
• [PATCH RFC v2 1/8] pinctrl: Add driver for Zynq   Sören Brinkmann
• [PATCH RFC v2 8/8] ARM: zynq: DT: Add pinctrl information   Sören Brinkmann
• [PATCH RFC v2 8/8] ARM: zynq: DT: Add pinctrl information   Sören Brinkmann
• [PATCH v2 11/18] iommu: exynos: remove useless device_add/remove callbacks   Alban Browaeys
• [PATCH v2 11/18] iommu: exynos: remove useless device_add/remove callbacks   Alban Browaeys
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Mark Brown
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Mark Brown
• [PATCH] ASoC: fsl: fix dependencies for wm8962   Mark Brown
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Mark Brown
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Mark Brown
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Mark Brown
• [RFC 7/7] regulator: qcom-smd-rpm: Regulator driver for the Qualcomm RPM   Mark Brown
• [PATCH 1/2] mtd: m25p80: get rid of spi_get_device_id   Mark Brown
• [PATCH v2 2/2] ASoC: rockchip-max98090: add driver for rockchip board using a max98090   Mark Brown
• [PATCH] ASoC: samsung: fix CDCLK handling   Mark Brown
• [PATCH v4 4/4] ASoC: tlv320aic3x: fix PLL D configuration   Mark Brown
• [PATCH 1/2] regulator: imx-anatop: Set default voltage selector for vddpu   Mark Brown
• [PATCH 2/2] regulator: imx-anatop: Fail on invalid voltage selector   Mark Brown
• [PATCH 1/5] regulator: Add ena_gpio_valid config   Mark Brown
• [PATCH 2/5] regulator: Set ena_gpio_valid in regulator drivers   Mark Brown
• [PATCH 4/5] regulator: Use gpio_is_valid   Mark Brown
• [PATCH 1/5] regulator: Add ena_gpio_valid config   Mark Brown
• [PATCH 4/5] regulator: Use gpio_is_valid   Mark Brown
• [PATCH v3 1/3] ASoC: tegra: add tegra sgtl5000 machine driver   Mark Brown
• [PATCH] ASoC: rockchip-i2s: fix infinite loop in rockchip_snd_txctrl   Mark Brown
• [PATCH] arm64: topology: Fix handling of multi-level cluster MPIDR-based detection   Mark Brown
• [PATCH 2/2] regulator: twl: use platform data in the DT based boot also   Mark Brown
• [PATCH v2 2/4] regulator: Set ena_gpio_initialized in regulator drivers   Mark Brown
• [PATCH v2 3/4] regulator: fixed: Use gpio_is_valid   Mark Brown
• [PATCH v2 1/4] regulator: Add ena_gpio_initialized to regulator_config   Mark Brown
• [PATCH 1/2] spi/rockchip: fix bug that case spi can't go as fast as slave request   Mark Brown
• [PATCH 2/2] spi/rockchip: fix bug that cause spi transfer timed out in DMA duplex mode   Mark Brown
• [PATCH] spi/atmel: add support for runtime PM   Mark Brown
• [PATCH 0/2 v3] SPI: spi-pxa2xx: Add support for Intel Quark X1000 SPI controller   Mark Brown
• [PATCH v2] spi/atmel: add support for runtime PM   Mark Brown
• [PATCH 1/2] spi/rockchip: fix bug that case spi can't go as fast as slave request   Mark Brown
• [PATCH 2/2] spi/rockchip: fix bug that cause spi transfer timed out in DMA duplex mode   Mark Brown
• [PATCH v2 01/53] dmaengine: Make the destination abbreviation coherent   Mark Brown
• [PATCH 1/2] spi/rockchip: fix bug that case spi can't go as fast as slave request   Mark Brown
• [PATCH] spi/rockchip: spi controller must be disabled in tx callback too   Mark Brown
• [PATCH] spi/atmel: add support for runtime PM   Mark Brown
• [PATCH] spi/atmel: add support for runtime PM   Mark Brown
• arm64 build failures in -next   Mark Brown
• [PATCH v2 2/2] ARM: EXYNOS: Call regulator core suspend prepare and finish functions   Mark Brown
• [PATCH] spi/atmel: improve the system suspend/resume functions implementation   Mark Brown
• [PATCH v3] ASoC: rockchip-i2s: add MAX98090 support to Kconfig   Mark Brown
• [PATCH] RFC: add function for localbus address   Mark Brown
• [PATCH v3 0/9] PM / Domains: Fix race conditions during boot   Mark Brown
• [PATCH v1 02/10] dt-bindings: Document the standard property "system-power-controller"   Mark Brown
• [PATCH v1 02/10] dt-bindings: Document the standard property "system-power-controller"   Mark Brown
• [PATCH 00/15] new locomo driver   Mark Brown
• [PATCH 2/8] regulator: max77686: Remove support for board files   Mark Brown
• [PATCH 4/8] regulator: max77686: Make regulator_desc array const   Mark Brown
• [PATCH V3 1/2] ARM: pxa: spitz: register spitz-audio device   Mark Brown
• [PATCH 15/15] spi: add locomo SPI driver   Mark Brown
• [PATCH 11/15] sound: soc: poodle: make use of new locomo GPIO interface   Mark Brown
• [PATCH V4 3/3] rtc: omap: Support regulator supply for RTC   Mark Brown
• [PATCH v5 3/4] regulator: max77686: Add suspend disable for some LDOs   Mark Brown
• [PATCH v5 1/4] regulator: max77686: Replace hard-coded opmode values with defines   Mark Brown
• [PATCH v5 2/4] regulator: max77686: Store opmode non-shifted   Mark Brown
• [PATCH 2/6] ASoC: cs42l51: make driver user-selectable   Mark Brown
• [PATCH 3/6] ASoC: kirkwood: get rid of armada-370-db driver   Mark Brown
• [PATCH 3/6] ASoC: kirkwood: get rid of armada-370-db driver   Mark Brown
• [PATCH v5 3/4] regulator: max77686: Add suspend disable for some LDOs   Mark Brown
• [PATCH] ASoC: rockchip-i2s: fix infinite loop in rockchip_snd_rxctrl   Mark Brown
• [PATCH v5 3/4] regulator: max77686: Add suspend disable for some LDOs   Mark Brown
• [PATCH 3/6] ASoC: kirkwood: get rid of armada-370-db driver   Mark Brown
• [PATCH] audio: sai: Add Power Management support   Mark Brown
• [PATCH] audio: sai: Add Power Management support   Mark Brown
• [PATCH v3 0/9] PM / Domains: Fix race conditions during boot   Mark Brown
• [PATCH 6/8] regulator: max77686: Add external GPIO control   Mark Brown
• [PATCH 6/8] regulator: max77686: Add external GPIO control   Mark Brown
• [PATCH v3 01/14] mfd: max77686/802: Map regulator driver to its own of_node   Mark Brown
• [PATCH v6 1/3] regulator: max77686: Add suspend disable for some LDOs   Mark Brown
• [PATCH v3 01/14] mfd: max77686/802: Map regulator driver to its own of_node   Mark Brown
• [PATCH] ASoC: rockchip-i2s: add rockchip-max98090 driver support   Mark Brown
• [PATCH v3 4/7] ARM: mediatek: Add sysirq interrupt polarity support   Matthias Brugger
• [PATCH v3 4/7] ARM: mediatek: Add sysirq interrupt polarity support   Matthias Brugger
• [PATCH v5 06/10] ARM: clocksource: add asm9260_timer driver   Matthias Brugger
• [PATCH v5 06/10] ARM: clocksource: add asm9260_timer driver   Matthias Brugger
• [PATCH v4 8/8] ARM: mediatek: Add config option for mediatek SoCs.   Matthias Brugger
• [PATCH v4 8/8] ARM: mediatek: Add config option for mediatek SoCs.   Matthias Brugger
• [PATCH v4 1/3] ARM: mediatek: Add basic support for mt6592   Matthias Brugger
• [PATCH v4 0/7] ARM: mediatek: Add support for interrupt polarity   Matthias Brugger
• [PATCH 2/3] ARM: mediatek: add UART dts for mt8127 and mt8135   Matthias Brugger
• [PATCH 6/7] arm: mediatek: enable gpt6 on boot up to make arch timer working   Matthias Brugger
• [PATCH 0/2] ARM: mediatek: Add watchdog driver   Matthias Brugger
• [PATCH 1/2] watchdog: Add driver for Mediatek mt6589 watchdog   Matthias Brugger
• [PATCH 2/2] ARM: mediatek: dts: Add bindings for watchdog   Matthias Brugger
• [PATCH 6/7] arm: mediatek: enable gpt6 on boot up to make arch timer working   Matthias Brugger
• [PATCH 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.   Matthias Brugger
• [PATCH 1/3] ARM: mediatek: Add Reset Controller for MediaTek SoC   Matthias Brugger
• [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller   Matthias Brugger
• [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller   Matthias Brugger
• [PATCH 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.   Matthias Brugger
• [PATCH v4 8/8] ARM: mediatek: Fix description for mediatek SoCs   Matthias Brugger
• [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller   Matthias Brugger
• [PATCH RESEND] tty: serial: 8250_mtk: Fix quot calculation   Matthias Brugger
• [PATCH 0/5] ARM: sunxi: Add support for USB OTG PHY   Roman Byshko
• [PATCH 1/5] phy: sun4i: add support for USB phy0   Roman Byshko
• [PATCH 2/5] ARM: dtsi: sunxi: add common VBUS regulator   Roman Byshko
• [PATCH 3/5] ARM: sun7i: dtsi: add support for usbphy0   Roman Byshko
• [PATCH 4/5] ARM: dts: sun7i: Cubietruck: override regulator pin   Roman Byshko
• [PATCH 5/5] ARM: dts: sun7i: Cubietruck: add power supply regulator for USB OTG VBUS   Roman Byshko
• [PATCH 01/26] ARM: sunxi: Fix GPLv2 wording   Roman Byshko
• [PATCH 1/5] phy: sun4i: add support for USB phy0   Roman Byshko
• [PATCH 2/5] ARM: dtsi: sunxi: add common VBUS regulator   Roman Byshko
• [PATCH] ARM: dts: rockchip: enable DMA on SPI for rk3066 and rk3188   Julien CHAUVEAU
• [PATCH] ARM: dts: rockchip: add I2S controllers for rk3066 and rk3188   Julien CHAUVEAU
• [PATCH v2] ARM: dts: rockchip: add I2S controllers for rk3066 and rk3188   Julien CHAUVEAU
• [PATCH] ARM: dts: rockchip: use internal pull-up resistors on I2C busses   Julien CHAUVEAU
• [PATCH v2] ARM: dts: rockchip: use internal pull-up resistors on I2C busses   Julien CHAUVEAU
• [PATCH] ARM: dts: rockchip: add serial aliases for rk3066 and rk3188   Julien CHAUVEAU
• [PATCH v1 1/4] ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066   NEO-Technologies / Julien CHAUVEAU
• [PATCH] ARM: dts: rockchip: use internal pull-up resistors on I2C busses   NEO-Technologies / Julien CHAUVEAU
• [PATCH v2] ARM: dts: rockchip: use internal pull-up resistors on I2C busses   NEO-Technologies / Julien CHAUVEAU
• [PATCH v2] ARM: dts: rockchip: use internal pull-up resistors on I2C busses   NEO-Technologies / Julien CHAUVEAU
• [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes   Gregory CLEMENT
• [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes   Gregory CLEMENT
• [PATCH] ARM: mvebu: Fix the Aurora L2 cache node with the required cache-unified property   Gregory CLEMENT
• [PATCH 1/4] clocksource: armada-370-xp: Add missing clock enable   Gregory CLEMENT
• [PATCH 0/4] Make Armada 375 use the reference clock when possible   Gregory CLEMENT
• [BISECTED] arm: mvebu: Kernel hang after ae9304c9d311 if OF_SELFTEST=y   Gregory CLEMENT
• [PATCH 0/4] Hot plug support for Armada 38x   Gregory CLEMENT
• [PATCH 1/4] ARM: mvebu: Clean-up the Armada XP support   Gregory CLEMENT
• [PATCH 2/4] ARM: mvebu: Move SCU power up in a function   Gregory CLEMENT
• [PATCH 3/4] ARM: mvebu: Fix secondary startup for Cortex A9 SoC   Gregory CLEMENT
• [PATCH 4/4] ARM: mvebu: Implement CPU hotplug support for Armada 38x   Gregory CLEMENT
• [PATCH 2/4] ARM: mvebu: Move SCU power up in a function   Gregory CLEMENT
• [PATCH 2/4] ARM: mvebu: Move SCU power up in a function   Gregory CLEMENT
• [PATCH v2 0/6] Add support for USB cluster(PHY muxer) on the Armada 375   Gregory CLEMENT
• [PATCH v2 1/6] phy: Use PTR_ERR_OR_ZERO to fix warning raised by coccinelle   Gregory CLEMENT
• [PATCH v2 2/6] Phy: DT binding documentation for Marvell MVEBU SATA phy.   Gregory CLEMENT
• [PATCH v2 3/6] Phy: DT binding documentation for the Armada 375 USB cluster binding   Gregory CLEMENT
• [PATCH v2 4/6] phy: add support for USB cluster on the Armada 375 SoC   Gregory CLEMENT
• [PATCH v2 5/6] ARM: mvebu: add Device Tree description of USB cluster controller on Armada 375   Gregory CLEMENT
• [PATCH v2 6/6] ARM: mvebu: add PHY support to the dts for the USB controllers on Armada 375   Gregory CLEMENT
• [PATCH v2 0/4] Hot plug support for the Armada 38x SoCs   Gregory CLEMENT
• [PATCH v2 1/4] ARM: mvebu: Clean-up the Armada XP support   Gregory CLEMENT
• [PATCH v2 2/4] ARM: mvebu: Move SCU power up in a function   Gregory CLEMENT
• [PATCH v2 3/4] ARM: mvebu: Fix the secondary startup for Cortex A9 SoC   Gregory CLEMENT
• [PATCH v2 4/4] ARM: mvebu: Implement the CPU hotplug support for the Armada 38x SoCs   Gregory CLEMENT
• [PATCHv0 0/2] arm: mvebu: non-critical fixes for NETGEAR ReadyNAS 102   Gregory CLEMENT
• [PATCH 06/17] gpio: mvebu: add suspend/resume support   Gregory CLEMENT
• [PATCHv2 1/3] ARM: mvebu: make the coherency_ll.S functions work with no coherency fabric   Gregory CLEMENT
• [PATCHv2 2/3] ARM: mvebu: disable I/O coherency on non-SMP situations on Armada 370/XP   Gregory CLEMENT
• [PATCHv2 3/3] ARM: mvebu: add missing of_node_put() call in coherency.c   Gregory CLEMENT
• [PATCH 1/7] irqchip: armada-370-xp: Simplify interrupt map, mask and unmask   Gregory CLEMENT
• [PATCH 0/3] ARM: Meson6: enable SMP   Carlo Caione
• [PATCH 1/6] ARM: meson: add meson8 machine definition   Carlo Caione
• [GIT PULL] ARM: meson: last DTS change for 3.18   Carlo Caione
• [PATCH 0/3] ARM: Meson6: enable SMP   Carlo Caione
• [PATCH v2 0/7] ARM: meson: add support for Meson8   Carlo Caione
• [PATCH 0/3] ARM: meson: Add reset controller   Carlo Caione
• [PATCH 1/3] ARM: meson: reset: Add reset controller for MesonX SoCs   Carlo Caione
• [PATCH 2/3] ARM: meson: DTSI: Enable reset controller   Carlo Caione
• [PATCH 3/3] ARM: meson: docs: Add docs for MesonX reset controller   Carlo Caione
• [PATCH 1/3] ARM: meson: reset: Add reset controller for MesonX SoCs   Carlo Caione
• [PATCH] ARM: meson: Fix UART compatible   Carlo Caione
• [PATCH] ARM: meson: Fix UART compatible   Carlo Caione
• [PATCH v2 0/3] ARM: meson: Add reset controller   Carlo Caione
• [PATCH v2 1/3] ARM: meson: reset: Add reset controller for MesonX SoCs   Carlo Caione
• [PATCH v2 2/3] ARM: meson: DTSI: Enable reset controller   Carlo Caione
• [PATCH v2 3/3] ARM: meson: docs: Add docs for MesonX reset controller   Carlo Caione
• [PATCH v2 1/3] ARM: meson: reset: Add reset controller for MesonX SoCs   Carlo Caione
• [PATCH v3 0/3] ARM: meson: Add reset controller   Carlo Caione
• [PATCH v3 1/3] ARM: meson: reset: Add reset controller for MesonX SoCs   Carlo Caione
• [PATCH v3 2/3] ARM: meson: DTSI: Enable reset controller   Carlo Caione
• [PATCH v3 3/3] ARM: meson: docs: Add docs for MesonX reset controller   Carlo Caione
• [PATCH 20/26] ARM: sun7i: cubietruck: Relicense the device tree under GPLv2/X11   Carlo Caione
• [PATCH v3 0/3] ARM: meson: Add reset controller   Carlo Caione
• [PATCH v3 1/3] ARM: meson: reset: Add reset controller for MesonX SoCs   Carlo Caione
• [linux-sunxi] Re: [PATCH v7 0/6] mfd: AXP20x: Add support for AXP202 and AXP209   Carlo Caione
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Julian Calaby
• [linux-sunxi] Re: Fixing boot-time hiccups in your display   Julian Calaby
• [PATCH v4 3/4] Staging: iio: light: Added correct vendor-prefix for device isl29028   Jonathan Cameron
• [PATCH v2 2/2] xen/arm: introduce GNTTABOP_cache_flush   Ian Campbell
• [PATCH v4 1/7] xen/arm: remove handling of XENFEAT_grant_map_identity   Ian Campbell
• [PATCH v4 4/7] xen/arm: use is_dma_coherent   Ian Campbell
• [PATCH v4 5/7] xen/arm/arm64: merge xen/mm32.c into xen/mm.c   Ian Campbell
• [PATCH v4 7/7] xen/arm: introduce GNTTABOP_cache_flush   Ian Campbell
• [PATCH v5 2/6] xen/arm: remove outer_*_range call   Ian Campbell
• [PATCH v5 3/6] xen/arm: introduce xen_is_dma_coherent   Ian Campbell
• [PATCH v5 4/6] xen/arm/arm64: merge xen/mm32.c into xen/mm.c   Ian Campbell
• [PATCH v5 5/6] xen/arm/arm64: introduce xen_arch_need_swiotlb   Ian Campbell
• [PATCH v4 3/7] [RFC] arm/arm64: introduce is_dma_coherent   Ian Campbell
• [RFC PATCH 1/1] arm64: Fix up /proc/cpuinfo   Ian Campbell
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Javier Martinez Canillas
• [PATCH v8 0/2] Adds PMU and S2R support for exynos5420   Javier Martinez Canillas
• [PATCH v8 0/2] Adds PMU and S2R support for exynos5420   Javier Martinez Canillas
• linux-next: build failure after merge of the arm-soc tree   Javier Martinez Canillas
• linux-next: build failure after merge of the arm-soc tree   Javier Martinez Canillas
• [PATCH v8] ARM: EXYNOS: Use MCPM call-backs to support S2R on Exynos5420   Javier Martinez Canillas
• [PATCH] ARM: sun7i: add support for A20-OLinuXino-Lime2   Javier Martinez Canillas
• [PATCH v8] ARM: EXYNOS: Use MCPM call-backs to support S2R on Exynos5420   Javier Martinez Canillas
• [PATCH v9 1/2] ARM: EXYNOS: Add platform driver support for Exynos PMU   Javier Martinez Canillas
• [PATCH v9 2/2] ARM: EXYNOS: Move PMU specific definitions from common.h   Javier Martinez Canillas
• [PATCH v9 1/2] ARM: exynos5: Add PMU support for 5420   Javier Martinez Canillas
• [PATCH v9 2/2] ARM: exynos5: Add Suspend-to-RAM support for 5420   Javier Martinez Canillas
• [PATCH v9] ARM: EXYNOS: Use MCPM call-backs to support S2R on Exynos5420   Javier Martinez Canillas
• [PATCH v9 0/2] Adds PMU and S2R support for exynos5420   Javier Martinez Canillas
• [PATCH v9 0/2] Adds PMU and S2R support for exynos5420   Javier Martinez Canillas
• [PATCH v9 0/2] Adds PMU and S2R support for exynos5420   Javier Martinez Canillas
• [PATCH 1/1] ARM: exynos_defconfig: re-enable USB gadget and max77802 options   Javier Martinez Canillas
• [PATCH v9 0/2] Adds PMU and S2R support for exynos5420   Javier Martinez Canillas
• [PATCH v9 0/2] Adds PMU and S2R support for exynos5420   Javier Martinez Canillas
• [PATCH 1/1] ARM: exynos_defconfig: re-enable USB gadget and max77802 options   Javier Martinez Canillas
• [PATCH 1/1] ARM: EXYNOS: Call regulator core suspend prepare and finish functions   Javier Martinez Canillas
• [PATCH 1/1] ARM: EXYNOS: Call regulator core suspend prepare and finish functions   Javier Martinez Canillas
• [PATCH v2 0/2] ARM: EXYNOS: Call regulator suspend prepare/finish   Javier Martinez Canillas
• [PATCH v2 1/2] Revert "mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption"   Javier Martinez Canillas
• [PATCH v2 2/2] ARM: EXYNOS: Call regulator core suspend prepare and finish functions   Javier Martinez Canillas
• [GIT PULL 2/2] Samsung defconfig updates for v3.18   Javier Martinez Canillas
• [PATCH v2 2/2] ARM: EXYNOS: Call regulator core suspend prepare and finish functions   Javier Martinez Canillas
• [PATCH v2 2/2] ARM: EXYNOS: Call regulator core suspend prepare and finish functions   Javier Martinez Canillas
• [PATCH v2 2/2] ARM: EXYNOS: Call regulator core suspend prepare and finish functions   Javier Martinez Canillas
• [PATCH v3 0/2] ARM: EXYNOS: Call regulator suspend prepare/finish   Javier Martinez Canillas
• [PATCH v3 1/2] Revert "mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption"   Javier Martinez Canillas
• [PATCH v3 2/2] ARM: EXYNOS: Call regulator core suspend prepare and finish functions   Javier Martinez Canillas
• [PATCH v3 2/2] ARM: EXYNOS: Call regulator core suspend prepare and finish functions   Javier Martinez Canillas
• [PATCH 2/2] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators   Javier Martinez Canillas
• [PATCH 1/2] regulator: max77686: Implement suspend disable for some LDOs   Javier Martinez Canillas
• [PATCH 1/2] regulator: max77686: Implement suspend disable for some LDOs   Javier Martinez Canillas
• [PATCH 2/2] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators   Javier Martinez Canillas
• [PATCH v2 1/4] regulator: max77686: Replace hard-coded opmode values with defines   Javier Martinez Canillas
• [PATCH v2 2/4] regulator: max77686: Implement suspend disable for some LDOs   Javier Martinez Canillas
• [PATCH v2 3/4] mfd/regulator: dt-bindings: max77686: Document regulators off in suspend   Javier Martinez Canillas
• [PATCH v2 4/4] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators   Javier Martinez Canillas
• [PATCH v2 1/4] regulator: max77686: Replace hard-coded opmode values with defines   Javier Martinez Canillas
• [PATCH v3 1/4] regulator: max77686: Replace hard-coded opmode values with defines   Javier Martinez Canillas
• [PATCH 1/1] ARM: exynos_defconfig: Enable max77802 rtc and clock drivers   Javier Martinez Canillas
• [PATCH v4 2/3] regulator: max77686: Implement suspend disable for some LDOs   Javier Martinez Canillas
• [PATCH v4 2/3] regulator: max77686: Implement suspend disable for some LDOs   Javier Martinez Canillas
• [PATCH v5 2/4] regulator: max77686: Store opmode non-shifted   Javier Martinez Canillas
• [PATCH v5 3/4] regulator: max77686: Add suspend disable for some LDOs   Javier Martinez Canillas
• [PATCH 1/8] regulator: max77802: Remove support for board files   Javier Martinez Canillas
• [PATCH 2/8] regulator: max77686: Remove support for board files   Javier Martinez Canillas
• [PATCH 3/8] mfd: max77686/802: Remove support for board files   Javier Martinez Canillas
• [PATCH 4/8] regulator: max77686: Make regulator_desc array const   Javier Martinez Canillas
• [PATCH 5/8] regulator: max77686: Initialize opmode explicitly to normal mode   Javier Martinez Canillas
• [PATCH 6/8] regulator: max77686: Add external GPIO control   Javier Martinez Canillas
• [PATCH 7/8] mfd/regulator: dt-bindings: max77686: Document gpio property   Javier Martinez Canillas
• [PATCH 1/8] regulator: max77802: Remove support for board files   Javier Martinez Canillas
• [PATCH v9] ARM: EXYNOS: Use MCPM call-backs to support S2R on Exynos5420   Javier Martinez Canillas
• [PATCH 6/8] regulator: max77686: Add external GPIO control   Javier Martinez Canillas
• [PATCH v5 3/4] regulator: max77686: Add suspend disable for some LDOs   Javier Martinez Canillas
• [PATCH v6 2/3] regulator: max77802: Remove suspend_enable   Javier Martinez Canillas
• [PATCH v6 7/7] ARM: dts: add suspend voltage setting for RK808   Javier Martinez Canillas
• [RFT v2 2/8] regulator: max77802: Remove support for board files   Javier Martinez Canillas
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Javier Martinez Canillas
• [PATCH v6 7/7] ARM: dts: add suspend voltage setting for RK808   Javier Martinez Canillas
• [PATCH v3 2/2] ARM: EXYNOS: Call regulator core suspend prepare and finish functions   Javier Martinez Canillas
• [RFT v3 05/14] regulator: max77802: Don't ignore return value of current opmode   Javier Martinez Canillas
• [RFT v3 06/14] regulator: max77802: Remove support for board files   Javier Martinez Canillas
• [RFT v3 06/14] regulator: max77802: Remove support for board files   Javier Martinez Canillas
• [RFT v3 06/14] regulator: max77802: Remove support for board files   Javier Martinez Canillas
• [RFT v3 06/14] regulator: max77802: Remove support for board files   Javier Martinez Canillas
• [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code   Javier Martinez Canillas
• [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code   Javier Martinez Canillas
• [PATCH v2 1/1] ARM: exynos_defconfig: Enable options for display panel support   Javier Martinez Canillas
• [PATCH V4 1/6] mm: Introduce a general RCU get_user_pages_fast.   Steve Capper
• [PATCH V4 1/6] mm: Introduce a general RCU get_user_pages_fast.   Steve Capper
• [PATCH V4 1/6] mm: Introduce a general RCU get_user_pages_fast.   Steve Capper
• [PATCH V4 1/6] mm: Introduce a general RCU get_user_pages_fast.   Steve Capper
• [PATCH] arm64: xchg: Implement cmpxchg_double   Steve Capper
• [PATCH] arm64: mm: Correct fixmap pagetable types   Steve Capper
• arm64 build failures in -next   Steve Capper
• [RFC PATCH 4/4] arm64:numa: adding numa support for arm64 platforms.   Steve Capper
• [RFC PATCH 4/4] arm64:numa: adding numa support for arm64 platforms.   Steve Capper
• [PATCH V2] arm64: xchg: Implement cmpxchg_double   Steve Capper
• [PATCH 2/6] arm64/mm: add create_pgd_mapping() to create private page tables   Steve Capper
• [PATCH 1/6] arm64/mm: add explicit struct_mm argument to __create_mapping()   Steve Capper
• [PATCHv4 7/7] arm64: add better page protections to arm64   Steve Capper
• [PATCHv4 7/7] arm64: add better page protections to arm64   Steve Capper
• [PATCH v4 0/4] Correct vendor-prefix and document device isl29028   Dan Carpenter
• [PATCH 0/4] Add KPSS watchdog driver to relevant device trees   Josh Cartwright
• [PATCH 1/4] ARM: qcom: add QCOM_WDT driver to qcom_defconfig   Josh Cartwright
• [PATCH 2/4] ARM: qcom: add description of KPSS WDT for IPQ8064   Josh Cartwright
• [PATCH 3/4] ARM: qcom: add description of KPSS WDT for APQ8064   Josh Cartwright
• [PATCH 4/4] ARM: qcom: add description of KPSS WDT for MSM8960   Josh Cartwright
• [PATCH 2/4] ARM: qcom: add description of KPSS WDT for IPQ8064   Josh Cartwright
• [PATCH 2/4] ARM: qcom: add description of KPSS WDT for IPQ8064   Josh Cartwright
• [PATCH 2/4] ARM: qcom: add description of KPSS WDT for IPQ8064   Josh Cartwright
• [PATCH v2 3/3] ARM: dts: qcom: Add SDHC nodes for APQ8084 platform   Josh Cartwright
• [PATCH v1] Arm64: ASLR: fix text randomization   Arun Chandran
• [PATCH v1] Arm64: ASLR: fix text randomization   Arun Chandran
• ASLR on arm64   Arun Chandran
• [PATCH v2] Arm64: ASLR: Don't randomise text when randomise_va_space == 0   Arun Chandran
• [PATCH 1/2 v2] SPI: spi-pxa2xx: Add helpers for regiseters' accessing   Chen, Alvin
• [PATCH 2/2 v2] SPI: spi-pxa2xx: SPI support for Intel Quark X1000   Chen, Alvin
• [PATCH 2/2 v2] SPI: spi-pxa2xx: SPI support for Intel Quark X1000   Chen, Alvin
• [PATCH 2/2 v3] SPI: spi-pxa2xx: SPI support for Intel Quark X1000   Chen, Alvin
• [PATCH 0/2 v3] SPI: spi-pxa2xx: Add support for Intel Quark X1000 SPI controller   Chen, Alvin
• [PATCH 1/2 v3] SPI: spi-pxa2xx: Add helpers for regiseters' accessing   Chen, Alvin
• [PATCH 1/2 v3] SPI: spi-pxa2xx: Add helpers for regiseters' accessing   Chen, Alvin
• [PATCH 1/2 v3] SPI: spi-pxa2xx: Add helpers for regiseters' accessing   Chen, Alvin
• [PATCH 1/2 v3] SPI: spi-pxa2xx: Add helpers for regiseters' accessing   Chen, Alvin
• [PATCH 1/3] ARM: mediatek: Add basic support for mt6592   Howard Chen
• [PATCH 2/3] ARM: mediatek: add dts for mt6592-evb   Howard Chen
• [PATCH 3/3] dt-bindings: add documentation for Mediatek SoC   Howard Chen
• [PATCH 2/3] ARM: mediatek: add dts for mt6592-evb   Howard Chen
• [PATCH v2 1/3] ARM: mediatek: Add basic support for mt6592   Howard Chen
• [PATCH v2 2/3] ARM: mediatek: add dts for mt6592-evb   Howard Chen
• [PATCH v2 3/3] dt-bindings: add documentation for Mediatek SoC   Howard Chen
• [PATCH v4 1/3] ARM: mediatek: Add basic support for mt6592   Howard Chen
• [PATCH v4 2/3] ARM: mediatek: add dts for mt6592-evb   Howard Chen
• [PATCH v4 3/3] dt-bindings: add documentation for Mediatek SoC   Howard Chen
• [PATCH] arm: use phys_addr_t to describe physical address   Min-Hua Chen
• [PATCH] ASoC: fsl: fix dependencies for wm8962   Nicolin Chen
• [PATCH 1/2] ARM: dts: imx53: Improve SSI clocks description   Nicolin Chen
• [PATCH v6 07/12] usb: chipidea: add a usb2 driver for ci13xxx   Peter Chen
• [PATCH v6 07/12] usb: chipidea: add a usb2 driver for ci13xxx   Peter Chen
• [PATCH 1/1] usb: chipidea: Fix oops when removing the ci_hdrc module   Peter Chen
• RCU bug with v3.17-rc3 ?   Peter Chen
• [PATCH v6 07/12] usb: chipidea: add a usb2 driver for ci13xxx   Peter Chen
• [PATCH 0/2 v3] SPI: spi-pxa2xx: Add support for Intel Quark X1000 SPI controller   Weike Chen
• [PATCH 1/2 v3] SPI: spi-pxa2xx: Add helpers for regiseters' accessing   Weike Chen
• [PATCH 2/2 v3] SPI: spi-pxa2xx: SPI support for Intel Quark X1000   Weike Chen
• [PATCH 0/3] ARM: mediatek: Add driver for Mediatek I2C controller   Xudong Chen
• [PATCH 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.   Xudong Chen
• [PATCH 2/3] ARM: mediatek: Add I2C node for mt8135 and mt8127   Xudong Chen
• [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller   Xudong Chen
• [PATCH v4 8/8] ARM: mediatek: Add config option for mediatek SoCs.   Yingjoe Chen
• [PATCH v4 8/8] ARM: mediatek: Add config option for mediatek SoCs.   Yingjoe Chen
• [PATCH v4 0/7] ARM: mediatek: Add support for interrupt polarity   Yingjoe Chen
• [PATCH v4 1/7] irqdomain: Fix irq_domain_alloc_irqs return check.   Yingjoe Chen
• [PATCH v4 2/7] irqdomain: Add back xlate and set_type for hierarchy irq domain   Yingjoe Chen
• [PATCH v4 3/7] genirq: Add more helper functions to support stacked irq_chip   Yingjoe Chen
• [PATCH v4 4/7] irqchip: gic: Support hierarchy irq domain.   Yingjoe Chen
• [PATCH v4 5/7] ARM: mediatek: Add sysirq interrupt polarity support   Yingjoe Chen
• [PATCH v4 6/7] ARM: mediatek: Add sysirq in mt6589/mt8135/mt8127 dtsi   Yingjoe Chen
• [PATCH v4 7/7] dt-bindings: add bindings for mediatek sysirq   Yingjoe Chen
• [PATCH v4 8/8] ARM: mediatek: Fix description for mediatek SoCs   Yingjoe Chen
• [PATCH v4 4/7] irqchip: gic: Support hierarchy irq domain.   Yingjoe Chen
• [PATCH 6/7] arm: mediatek: enable gpt6 on boot up to make arch timer working   Yingjoe Chen
• [PATCH v4 0/7] ARM: mediatek: Add support for interrupt polarity   Yingjoe Chen
• [PATCH v4 0/7] ARM: mediatek: Add support for interrupt polarity   Yingjoe Chen
• [Patch Part2 v3 01/24] irqdomain: Introduce new interfaces to support hierarchy irqdomains   Yingjoe Chen
• [PATCH v5 0/6] ARM: mediatek: Add support for interrupt polarity   Yingjoe Chen
• [PATCH v5 1/6] irqdomain: do irq_find_mapping and set_type for hierarchy irqdomain   Yingjoe Chen
• [PATCH v5 2/6] genirq: Add more helper functions to support stacked irq_chip   Yingjoe Chen
• [PATCH v5 3/6] irqchip: gic: Support hierarchy irq domain.   Yingjoe Chen
• [PATCH v5 4/6] ARM: mediatek: Add sysirq interrupt polarity support   Yingjoe Chen
• [PATCH v5 5/6] ARM: mediatek: Add sysirq in mt6589/mt8135/mt8127 dtsi   Yingjoe Chen
• [PATCH v5 6/6] dt-bindings: add bindings for mediatek sysirq   Yingjoe Chen
• [Patch Part2 v3 01/24] irqdomain: Introduce new interfaces to support hierarchy irqdomains   Yingjoe Chen
• [PATCH 6/7] arm: mediatek: enable gpt6 on boot up to make arch timer working   Yingjoe Chen
• [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller   Yingjoe Chen
• [PATCH v4 8/8] ARM: mediatek: Fix description for mediatek SoCs   Yingjoe Chen
• [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller   Yingjoe Chen
• [PATCH] ARM: dts: add board dts file for Exynos3250-based Monk board   YoungJun Cho
• [PATCH v2] ARM: dts: add board dts file for Exynos3250-based Monk board   YoungJun Cho
• [PATCHv2 0/2] ARM: dts: Add new board dts file for Exynos3250-based Rinato board   Chanwoo Choi
• [PATCHv2 1/2] ARM: dts: Add board dts file for Exynos3250-based Rinato board   Chanwoo Choi
• [PATCHv2 2/2] ARM: dts: Add sleep mode pin configuration for exynos3250-rinato   Chanwoo Choi
• [PATCH 21/21] thermal: exynos: Make Exynos3250 TMU compatible with Exynos4412   Chanwoo Choi
• [PATCHv2 0/2] ARM: dts: Add new board dts file for Exynos3250-based Rinato board   Chanwoo Choi
• [PATCH v2 2/2] ARM: EXYNOS: Call regulator core suspend prepare and finish functions   Chanwoo Choi
• [GIT PULL 2/2] Samsung defconfig updates for v3.18   Chanwoo Choi
• [PATCH 0/5] Support new Exynos4415 SoC based on Cortex-A9 quad cores   Chanwoo Choi
• [PATCH 1/5] ARM: EXYNOS: Add EXYNOS4415 SoC ID   Chanwoo Choi
• [PATCH 2/5] clk: samsung: exynos4415: Add clocks using common clock framework   Chanwoo Choi
• [PATCH 3/5] clk: samsung: Document binding for Exynos4415 clock controller   Chanwoo Choi
• [PATCH 4/5] pinctrl: exynos: Add support for Exynos4415   Chanwoo Choi
• [PATCH 5/5] ARM: dts: Add dts files for Exynos4415 SoC   Chanwoo Choi
• [PATCHv4 0/4] cpufreq: Use cpufreq-dt driver for Exynos3250   Chanwoo Choi
• [PATCHv4 1/4] clk: samsung: exynos3250: Add cpu clock configuration data and instaniate cpu clock   Chanwoo Choi
• [PATCHv4 2/4] clk: samsung: exynos3250: Update clock flags related to CPU to use cpu-clock type   Chanwoo Choi
• [PATCHv4 3/4] ARM: exynos: Add exynos3250 compatible to use generic cpufreq driver   Chanwoo Choi
• [PATCHv4 4/4] ARM: dts: Add CPU OPP and regulator supply property for Exynos3250   Chanwoo Choi
• [PATCH v3 1/2] Revert "mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption"   Chanwoo Choi
• [PATCH 2/2] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators   Chanwoo Choi
• [PATCH v3 4/4] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators   Chanwoo Choi
• [PATCH 3/5] clk: samsung: Document binding for Exynos4415 clock controller   Chanwoo Choi
• [PATCH 2/5] clk: samsung: exynos4415: Add clocks using common clock framework   Chanwoo Choi
• [PATCHv3 0/3] ARM: dts: Add new board dts file for Exynos3250-based Rinato board   Chanwoo Choi
• [PATCHv3 1/3] ARM: dts: Add board dts file for Exynos3250-based Rinato board   Chanwoo Choi
• [PATCHv3 2/3] ARM: dts: Add sleep mode pin configuration for exynos3250-rinato   Chanwoo Choi
• [PATCHv3 3/3] ARM: dts: Add sleep mode of regulator for exynos3250-rinato board   Chanwoo Choi
• [PATCH 1/5] ARM: EXYNOS: Add EXYNOS4415 SoC ID   Chanwoo Choi
• [PATCHv3 2/3] ARM: dts: Add sleep mode pin configuration for exynos3250-rinato   Chanwoo Choi
• [PATCHv3 1/3] ARM: dts: Add board dts file for Exynos3250-based Rinato board   Chanwoo Choi
• [PATCHv4 0/3] ARM: dts: Add new board dts file for Exynos3250-based Rinato board   Chanwoo Choi
• [PATCHv4 1/3] ARM: dts: Add board dts file for Exynos3250-based Rinato board   Chanwoo Choi
• [PATCHv4 2/3] ARM: dts: Add sleep mode pin configuration for exynos3250-rinato   Chanwoo Choi
• [PATCHv4 3/3] ARM: dts: Add sleep mode of regulator for exynos3250-rinato board   Chanwoo Choi
• [PATCH 2/5] clk: samsung: exynos4415: Add clocks using common clock framework   Chanwoo Choi
• [PATCH 5/5] ARM: dts: Add dts files for Exynos4415 SoC   Chanwoo Choi
• [PATCHv2] pinctrl: exynos: Add support for Exynos4415   Chanwoo Choi
• [PATCHv2 0/2] Support new Exynos4415 SoC based on Cortex-A9 quad cores   Chanwoo Choi
• [PATCHv2 1/2] ARM: EXYNOS: Add EXYNOS4415 SoC ID   Chanwoo Choi
• [PATCHv2 2/2] ARM: dts: Add dts files for Exynos4415 SoC   Chanwoo Choi
• [PATCHv4 0/3] ARM: dts: Add new board dts file for Exynos3250-based Rinato board   Chanwoo Choi
• [PATCHv4 0/3] ARM: dts: Add new board dts file for Exynos3250-based Rinato board   Chanwoo Choi
• [PATCHv2 1/2] ARM: EXYNOS: Add EXYNOS4415 SoC ID   Chanwoo Choi
• [PATCHv3 0/2] ARM: EXYNOS: Support new Exynos4415 SoC based on Cortex-A9 quad cores   Chanwoo Choi
• [PATCHv3 1/2] ARM: EXYNOS: Add EXYNOS4415 SoC   Chanwoo Choi
• [PATCHv3 2/2] ARM: dts: Add dts files for Exynos4415 SoC   Chanwoo Choi
• [PATCHv3 2/2] ARM: dts: Add dts files for Exynos4415 SoC   Chanwoo Choi
• [PATCHv4 0/2] ARM: EXYNOS: Support new Exynos4415 SoC based on Cortex-A9 quad cores   Chanwoo Choi
• [PATCHv4 1/2] ARM: EXYNOS: Add EXYNOS4415 SoC   Chanwoo Choi
• [PATCHv4 2/2] ARM: dts: Add dts files for Exynos4415 SoC   Chanwoo Choi
• [PATCH] mmc: dw_mmc: Reset DMA before enabling IDMAC   Jaehoon Chung
• [PATCH] ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board   Jaehoon Chung
• [PATCH] mmc: dw_mmc: rockchip: Don't recalc the clock when it goes off   Jaehoon Chung
• [PATCH 2/2] ARM: dts: socfpga: Add a 3.3V fixed regulator node   Jaehoon Chung
• [PATCH v2] mmc: dw_mmc: Reset DMA before enabling IDMAC   Jaehoon Chung
• [PATCHv2 1/2] ARM: dts: socfpga: Fix SD card detect   Jaehoon Chung
• [PATCH] mmc: dw_mmc: add a quirk for the defferent bit of sdio interrupt   Jaehoon Chung
• [PATCH] mmc: dw_mmc: add support for the other bit of sdio interrupt   Jaehoon Chung
• [PATCH] mmc: dw_mmc: add support for the other bit of sdio interrupt   Jaehoon Chung
• [PATCH] mmc: dw_mmc: add support for the other bit of sdio interrupt   Jaehoon Chung
• [PATCH v2] mmc: dw_mmc: add support for the other bit of sdio interrupt   Jaehoon Chung
• [PATCH v2 0/3] VFP fixes   Rob Clark
• [alsa-devel] [PATCH] ASoC: rockchip-i2s: add rockchip-max98090 driver support   Lars-Peter Clausen
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   Richard Cochran
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   Richard Cochran
• [PATCH 06/17] gpio: mvebu: add suspend/resume support   David Cohen
• [PATCH 06/17] gpio: mvebu: add suspend/resume support   David Cohen
• [PATCH v2] arm: prevent BUG_ON in audit_syscall_entry()   Kees Cook
• [PATCH v7 1/6] arm64: ptrace: add PTRACE_SET_SYSCALL   Kees Cook
• arm: JUMP_LABEL and DEBUG_SET_MODULE_RONX should be mutually exclusive?   Kees Cook
• arm: JUMP_LABEL and DEBUG_SET_MODULE_RONX should be mutually exclusive?   Kees Cook
• [PULL v2] ARM ro-nx tree (next)   Kees Cook
• arm: JUMP_LABEL and DEBUG_SET_MODULE_RONX should be mutually exclusive?   Kees Cook
• [GIT PULL] clk: mvebu: Last change for v3.18   Jason Cooper
• [GIT PULL] ARM: mvebu: Last DT changes for v3.18   Jason Cooper
• [GIT PULL] ARM: mvebu: Last DT changes for v3.18   Jason Cooper
• [PATCH 0/2] Marvell Armada 375/38x MPIC/MSI fixes   Jason Cooper
• [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes   Jason Cooper
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   Jason Cooper
• [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes   Jason Cooper
• [Patch V2 1/2] ARM: mvebu: armada xp: Generalize use of i2c quirk   Jason Cooper
• [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes   Jason Cooper
• [PATCH] fix for certain sequnce of request_irq can cause irq storm   Jason Cooper
• [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes   Jason Cooper
• [PATCH 0/2] Marvell Armada 375/38x MPIC/MSI fixes   Jason Cooper
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   Jason Cooper
• [GIT PULL] ARM: STi: DT changes for v3.18   Maxime Coquelin
• [GIT PULL] ARM: STi: DT changes for v3.18   Maxime Coquelin
• [RFC PATCH 0/2] mfd: syscon: declare holes in syscon register maps   Maxime Coquelin
• Koelsch boot broken on 3.18-rc1 ?   Maxime Coquelin
• [GIT PULL] ARM: STi: DT changes for v3.19, round 1   Maxime Coquelin
• [GIT PULL] STi: Reset changes for v3.19   Maxime Coquelin
• [PATCH v5] crypto: Add Allwinner Security System crypto accelerator   LABBE Corentin
• [PATCH v5 1/4] ARM: sun7i: dt: Add Security System to A20 SoC DTS   LABBE Corentin
• [PATCH v5 2/4] ARM: sunxi: dt: Add DT bindings documentation for SUNXI Security System   LABBE Corentin
• [PATCH v5 3/4] MAINTAINERS: Add myself as maintainer of Allwinner Security System   LABBE Corentin
• [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator   LABBE Corentin
• [PATCH 1/2] MAINTAINERS: add Alex Courbot for Tegra   Alexandre Courbot
• [PATCH] gpio: pl061: hook request if gpio-ranges avaiable   Alexandre Courbot
• [PATCH v1 1/5] mfd: tps65910: Convert ti, system-power-controller DT property to poweroff-source   Alexandre Courbot
• [PATCH 06/17] gpio: mvebu: add suspend/resume support   Alexandre Courbot
• [PATCH v2 07/10] ARM: dts: tegra: Use standard power-off property in tps65911 for tegra30 apalis   Alexandre Courbot
• [PATCH 11/15] sound: soc: poodle: make use of new locomo GPIO interface   Alexandre Courbot
• [PATCH RESEND V4 0/9] Tegra xHCI support   Alexandre Courbot
• [PATCH v4 05/12] memory: Add NVIDIA Tegra memory controller support   Alexandre Courbot
• [PATCH v4 05/12] memory: Add NVIDIA Tegra memory controller support   Alexandre Courbot
• [PATCH v4 05/12] memory: Add NVIDIA Tegra memory controller support   Alexandre Courbot
• [PATCH 6/8] regulator: max77686: Add external GPIO control   Alexandre Courbot
• [PATCH 6/8] regulator: max77686: Add external GPIO control   Alexandre Courbot
• [PATCH v4 05/12] memory: Add NVIDIA Tegra memory controller support   Alexandre Courbot
• [PATCH 11/15] sound: soc: poodle: make use of new locomo GPIO interface   Alexandre Courbot
• [PATCH 6/8] regulator: max77686: Add external GPIO control   Alexandre Courbot
• [PATCH] MAINTAINERS: Update entry for omap related .dts files to cover new SoCs   Benoit Cousson
• [PATCH] arm64: ptrace: hw_break_set take into account hardware breakpoints number   Christopher Covington
• where/how arm start first jump from svc to user in kernel   Christopher Covington
• [RFC PATCH] arm/arm64: KVM: Fix BE accesses to GICv2 EISR and ELRSR regs   Christoffer Dall
• [PATCH 1/2] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Christoffer Dall
• [PATCH 2/2] arm/arm64: KVM: Ensure memslots are within KVM_PHYS_SIZE   Christoffer Dall
• [PATCH 1/2] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Christoffer Dall
• [PATCH v2 0/3] arm/arm64: KVM: Host 48-bit VA support and IPA limits   Christoffer Dall
• [PATCH v2 1/3] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Christoffer Dall
• [PATCH v2 2/3] arm/arm64: KVM: Ensure memslots are within KVM_PHYS_SIZE   Christoffer Dall
• [PATCH v2 3/3] arm64: Allow 48-bits VA space without ARM_SMMU   Christoffer Dall
• [PATCH v2 0/3] arm/arm64: KVM: Host 48-bit VA support and IPA limits   Christoffer Dall
• [PATCH] ARM: KVM: fix vgic-disabled build   Christoffer Dall
• [PATCH v2 1/3] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Christoffer Dall
• [PATCH v2 1/3] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Christoffer Dall
• [PATCH v2 1/3] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Christoffer Dall
• [PATCH v2] arm/arm64: KVM: map MMIO regions at creation time   Christoffer Dall
• [PATCH v2] arm/arm64: KVM: map MMIO regions at creation time   Christoffer Dall
• [PATCH v2] arm/arm64: KVM: map MMIO regions at creation time   Christoffer Dall
• [PATCH v2 1/3] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Christoffer Dall
• [PATCH 2/6] arm/arm64: KVM: fix potential NULL dereference in user_mem_abort()   Christoffer Dall
• [PATCH v2 1/3] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Christoffer Dall
• [PATCH v3 0/3] arm/arm64: KVM: Host 48-bit VA support and IPA limits   Christoffer Dall
• [PATCH v3 1/3] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Christoffer Dall
• [PATCH v3 2/3] arm/arm64: KVM: Ensure memslots are within KVM_PHYS_SIZE   Christoffer Dall
• [PATCH v3 3/3] arm64: Allow 48-bits VA space without ARM_SMMU   Christoffer Dall
• [PATCH v3] arm/arm64: KVM: map MMIO regions at creation time   Christoffer Dall
• [PATCH 0/6] KVM: handling of MMIO pass-through regions   Christoffer Dall
• [PATCH v3 3/3] arm64: Allow 48-bits VA space without ARM_SMMU   Christoffer Dall
• [PATCH v4] arm/arm64: KVM: map MMIO regions at creation time   Christoffer Dall
• [PATCH v2 01/15] arm/arm64: KVM: rework MPIDR assignment and add accessors   Christoffer Dall
• [PATCH v2 02/15] arm/arm64: KVM: pass down user space provided GIC type into vGIC code   Christoffer Dall
• [PATCH v2 03/15] arm/arm64: KVM: refactor vgic_handle_mmio() function   Christoffer Dall
• [PATCH v2 04/15] arm/arm64: KVM: wrap 64 bit MMIO accesses with two 32 bit ones   Christoffer Dall
• [PATCH v2 05/15] arm/arm64: KVM: introduce per-VM ops   Christoffer Dall
• [PATCH v2 06/15] arm/arm64: KVM: make the maximum number of vCPUs a per-VM value   Christoffer Dall
• [PATCH v2 07/15] arm/arm64: KVM: make the value of ICC_SRE_EL1 a per-VM variable   Christoffer Dall
• [RFC PATCH] arm/arm64: KVM: Fix BE accesses to GICv2 EISR and ELRSR regs   Christoffer Dall
• [PATCH 01/10] arm64/kvm: Fix assembler compatibility of macros   Christoffer Dall
• [PATCH] arm64: KVM: fix unmapping with 48-bit VAs   Christoffer Dall
• [PATCH] arm64: KVM: fix unmapping with 48-bit VAs   Christoffer Dall
• [PATCH] arm64: KVM: fix unmapping with 48-bit VAs   Christoffer Dall
• [PATCH] [RFC] ARM: shmobile: Add early debugging support using SCIF(A)   Magnus Damm
• [PATCH v2 00/11] ARM: shmobile: r8a7740/armadillo800eva legacy PM domain support   Magnus Damm
• [PATCH] [RFC] ARM: shmobile: Add early debugging support using SCIF(A)   Magnus Damm
• [PATCH 1/4] ARM: shmobile: r8a7790: Add RGX clock to device tree   Magnus Damm
• [PATCH 05/44] mfd: as3722: Drop reference to pm_power_off from devicetree bindings   David Daney
• [PATCH 0/4] Arndale: Adding Sound Machine Driver for ALC5631 Codec   Krishna Mohan Dani
• [PATCH 1/4] ASoC: ALC5631: Add device tree binding documentation   Krishna Mohan Dani
• [PATCH 2/4] Sound: Samsung: Add sound card machine driver for Arndale Board   Krishna Mohan Dani
• [PATCH 3/4] Sound: Kconfig: Adding the description of the codec   Krishna Mohan Dani
• [PATCH 4/4] Sound: DT: Adding Device Tree compatibility to Realtek's ALC5631 codec driver   Krishna Mohan Dani
• randconfig build error with next-20141001, in drivers/media/platform/s5p-tv/hdmiphy_drv.c   Jim Davis
• [PATCH] arm64: Use and error-check DMA_ERROR_CODE   Will Deacon
• [RFC PATCH v3 7/7] arm: dma-mapping: plumb our iommu mapping ops into arch_setup_dma_ops   Will Deacon
• [PATCH v6 2/6] arm64: ptrace: allow tracer to skip a system call   Will Deacon
• [RFC v2] arm64: kgdb: fix single stepping   Will Deacon
• [PATCHv2 0/5] Legacy instruction emulation for arm64   Will Deacon
• [PATCHv2 3/5] arm64: Port SWP/SWPB emulation support from arm   Will Deacon
• [PATCH 2/5] iommu/arm-smmu: add support for PCI master devices   Will Deacon
• [PATCH] arm: armv7: perf: fix armv7 ref-cycles error   Will Deacon
• [PATCH v1] Arm64: ASLR: fix text randomization   Will Deacon
• [PATCH 2/3] ARM: vfp: fix VFPv3 hwcap detection on non-ARM vfp implementations   Will Deacon
• [PATCH] arm: armv7: perf: fix armv7 ref-cycles error   Will Deacon
• [PATCH v7 1/6] arm64: ptrace: add PTRACE_SET_SYSCALL   Will Deacon
• [PATCH v7 2/6] arm64: ptrace: allow tracer to skip a system call   Will Deacon
• [PATCH v7 5/6] arm64: add SIGSYS siginfo for compat task   Will Deacon
• [PATCH 0/7] arm64 kexec kernel patches V3   Will Deacon
• [PATCH v7 1/6] arm64: ptrace: add PTRACE_SET_SYSCALL   Will Deacon
• [PATCH v7 2/6] arm64: ptrace: allow tracer to skip a system call   Will Deacon
• [PATCH v4 3/7] [RFC] arm/arm64: introduce is_dma_coherent   Will Deacon
• [PATCH v4 3/7] [RFC] arm/arm64: introduce is_dma_coherent   Will Deacon
• [PATCH v4] ARM: perf: save/restore pmu registers in pm notifier   Will Deacon
• [PATCH] arm: fix flush_pfn_alias   Will Deacon
• [PATCH] arm64: Add KEYS_COMPAT to Kconfig & enable   Will Deacon
• [PATCH v2 2/3] ARM: vfp: Fix VFPv3 hwcap detection on CPUID based cpus   Will Deacon
• [PATCH 1/1] bus: cci: move away from arm_pmu framework   Will Deacon
• [PATCH] arm64: kgdb: fix single stepping   Will Deacon
• [RFC V3] arm/arm64:add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction   Will Deacon
• [RFC PATCH v3 5/7] dma-mapping: detect and configure IOMMU in of_dma_configure   Will Deacon
• [PATCH v6 2/2] iommu/arm-smmu: add support for iova_to_phys through ATS1PR   Will Deacon
• [PATCH 00/10] arm64 EFI patches for 3.19   Will Deacon
• [PATCH resend] ARM: perf: remove useless return and check of idx in counter handling   Will Deacon
• [PATCH RFC 1/2] drivers: pci: fix window allocation order wrt bus_range filtering   Will Deacon
• [PATCH RFC 2/2] drivers: pci: convert generic host controller to DT resource parsing API   Will Deacon
• [PATCH 01/10] arm64/kvm: Fix assembler compatibility of macros   Will Deacon
• [PATCH 05/10] arm64/efi: drop redundant set_bit(EFI_CONFIG_TABLES)   Will Deacon
• [PATCH 10/10] arm64: dmi: set DMI string as dump stack arch description   Will Deacon
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   Will Deacon
• [percpu] Convert remaining __get_cpu_var uses in 3.18-rcX   Will Deacon
• [RFC PATCH v3 5/7] dma-mapping: detect and configure IOMMU in of_dma_configure   Will Deacon
• [PATCH v2 2/3] ARM: vfp: Fix VFPv3 hwcap detection on CPUID based cpus   Will Deacon
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   Will Deacon
• [PATCH] arm64: ARCH_PFN_OFFSET should be unsigned long   Will Deacon
• [PATCH 00/10] arm64 EFI patches for 3.19   Will Deacon
• [PATCH] arm64: ARCH_PFN_OFFSET should be unsigned long   Will Deacon
• [PATCH V2] arm64: xchg: Implement cmpxchg_double   Will Deacon
• [RFC V3] arm/arm64:add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction   Will Deacon
• [PATCH v7 2/2] iommu/arm-smmu: add support for iova_to_phys through ATS1PR   Will Deacon
• [PATCH v7 1/2] iopoll: Introduce memory-mapped IO polling macros   Will Deacon
• [RFC V5 3/3] arm64:add bitrev.h file to support rbit instruction   Will Deacon
• [RFC V5 3/3] arm64:add bitrev.h file to support rbit instruction   Will Deacon
• [PATCH] ARM: decompressor: ensure I-side picks up relocated code   Will Deacon
• [PATCH] ARM: mm: try to re-use old ASID assignments following a rollover   Will Deacon
• [RFC PATCH 1/1] arm64: Fix up /proc/cpuinfo   Will Deacon
• [PATCH] ARM: decompressor: ensure I-side picks up relocated code   Will Deacon
• [RFC V6 3/3] arm64:add bitrev.h file to support rbit instruction   Will Deacon
• [PATCH v2 3/3] ARM: dts: qcom: Add SDHC nodes for APQ8084 platform   Nicolas Dechesne
• [PATCH v2 3/3] ARM: dts: qcom: Add SDHC nodes for APQ8084 platform   Nicolas Dechesne
• [PATCH v6 0/3] new Atmel DMA controller (XDMAC)   Ludovic Desroches
• [PATCH v6 0/3] new Atmel DMA controller (XDMAC)   Ludovic Desroches
• [PATCH v6 1/3] dma: at_xdmac: creation of the atmel eXtended DMA Controller driver   Ludovic Desroches
• [PATCH v6 2/3] ARM: dts: at_xdmac: add bindings documentation   Ludovic Desroches
• [PATCH v6 3/3] MAINTAINERS: add entry for Atmel XDMA driver   Ludovic Desroches
• [PATCH] at91: sam9x5 dt: add usart dma definitions to dt   Ludovic Desroches
• [PATCH] at91: sam9x5 dt: add usart dma definitions to dt   Ludovic Desroches
• [PATCH v6 0/3] new Atmel DMA controller (XDMAC)   Ludovic Desroches
• [PATCH v6 2/3] ARM: dts: at_xdmac: add bindings documentation   Ludovic Desroches
• [PATCH v6 1/3] dma: at_xdmac: creation of the atmel eXtended DMA Controller driver   Ludovic Desroches
• [PATCH v6 1/3] dma: at_xdmac: creation of the atmel eXtended DMA Controller driver   Ludovic Desroches
• [PATCHv2 0/3] Remove mach/atmel-mci.h   Ludovic Desroches
• [PATCH 1/3] i2c/at91: add support for runtime PM   Ludovic Desroches
• [PATCH 2/3] i2c/at91: add support for system PM   Ludovic Desroches
• [PATCH 3/3] i2c/at91: adopt pinctrl support   Ludovic Desroches
• [PATCH 1/3] i2c/at91: add support for runtime PM   Ludovic Desroches
• [PATCH 2/3] i2c/at91: add support for system PM   Ludovic Desroches
• [PATCH v6 1/3] dma: at_xdmac: creation of the atmel eXtended DMA Controller driver   Ludovic Desroches
• [PATCH v2] i2c:at91: add bound checking on SMBus block length bytes   Ludovic Desroches
• [PATCH 8/8] MAINTAINERS: add at91 power and memory entries   Ludovic Desroches
• [PATCH] ARM: at91: sama5: update defconfig   Ludovic Desroches
• [PATCH v7 0/3] new Atmel DMA controller   Ludovic Desroches
• [PATCH v7 1/3] dma: at_xdmac: creation of the atmel eXtended DMA Controller driver   Ludovic Desroches
• [PATCH v7 2/3] ARM: dts: at_xdmac: add bindings documentation   Ludovic Desroches
• [PATCH v7 3/3] MAINTAINERS: add entry for Atmel XDMA driver   Ludovic Desroches
• [PATCH v2] i2c:at91: add bound checking on SMBus block length bytes   Ludovic Desroches
• [PATCH v3 0/3] i2c/at91: add support PM functions   Ludovic Desroches
• [PATCH 29/44] staging: nvec: Register with kernel poweroff handler   Marc Dietrich
• [PATCH] ARM: qcom: Increase MMC_BLOCK_MINORS in defconfig   Georgi Djakov
• [PATCH] ARM: multi_v7_defconfig: Enable SDHCI for Qualcomm platforms   Georgi Djakov
• [PATCH] ARM: multi_v7_defconfig: Enable clocks for APQ8084 boards   Georgi Djakov
• [PATCH v2 3/3] ARM: dts: qcom: Add SDHC nodes for APQ8084 platform   Georgi Djakov
• 3.17-rc6 on ODROID: ERROR: Bad of_node_put() on /ehci at 12580000/port at 1   Daniel Drake
• [PATCH 3.17-rc4 v7 0/6] arm: Implement arch_trigger_all_cpu_backtrace   Daniel Drake
• [PATCH 2/5] clk: samsung: exynos4415: Add clocks using common clock framework   Daniel Drake
• [PATCH 5/5] ARM: dts: Add dts files for Exynos4415 SoC   Daniel Drake
• [PATCH 5/5] ARM: dts: Add dts files for Exynos4415 SoC   Daniel Drake
• [PATCH v2 0/2] Handle reboot for Exynos SoC via reboot_notifier   Pankaj Dubey
• [PATCH v2 1/2] clk: samsung: exynos5440: move restart code into clock driver   Pankaj Dubey
• [PATCH v2 2/2] ARM: EXYNOS: PMU: move restart code into pmu driver   Pankaj Dubey
• [PATCH 2/2] ARM: EXYNOS: PMU: move restart code into pmu driver   Pankaj Dubey
• [PATCH v7] mfd: syscon: Decouple syscon interface from platform devices   Pankaj Dubey
• [PATCH v9 0/2] ARM: Exynos: Convert PMU implementation into a platform driver   Pankaj Dubey
• [PATCH v9 1/2] ARM: EXYNOS: Add platform driver support for Exynos PMU   Pankaj Dubey
• [PATCH v9 2/2] ARM: EXYNOS: Move PMU specific definitions from common.h   Pankaj Dubey
• [PATCH v2 2/2] ARM: EXYNOS: PMU: move restart code into pmu driver   Pankaj Dubey
• [PATCH v3 0/2] Handle reboot for Exynos SoC via restart_handler   Pankaj Dubey
• [PATCH v3 1/2] clk: samsung: exynos5440: move restart code into clock driver   Pankaj Dubey
• [PATCH v3 2/2] ARM: EXYNOS: PMU: move restart code into pmu driver   Pankaj Dubey
• [PATCH v3] ARM: EXYNOS: add Exynos3250 PMU support   Pankaj Dubey
• [PATCH v2 0/3] Some cleanup for samsung clock   Pankaj Dubey
• [PATCH v7] mfd: syscon: Decouple syscon interface from platform devices   Pankaj Dubey
• [PATCH] ARM: EXYNOS: fix typo in static struct name "exynos5_list_diable_wfi_wfe"   Pankaj Dubey
• [PATCH v4 0/2] Move i2c sys_cfg register configuration to i2c driver   Pankaj Dubey
• [PATCH v4 1/2] i2c: s3c2410: Handle i2c sys_cfg register in i2c driver   Pankaj Dubey
• [PATCH v4 2/2] ARM: EXYNOS: Remove i2c sys configuration related code   Pankaj Dubey
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Liviu Dudau
• [PATCH] of/pci: add pci_pio_to_address dummy for !CONFIG_OF   Liviu Dudau
• [PATCH 3/6] pci, thunder: Add PCIe host controller devicetree bindings   Liviu Dudau
• [PATCH v13 00/12] Support for creating generic PCI host bridges from DT   Liviu Dudau
• [PATCH v13 00/12] Support for creating generic PCI host bridges from DT   Liviu Dudau
• [PATCH 3/6] pci, thunder: Add PCIe host controller devicetree bindings   Liviu Dudau
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Liviu Dudau
• [PATCH RFC 1/2] drivers: pci: fix window allocation order wrt bus_range filtering   Liviu Dudau
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Liviu Dudau
• [PATCH] arm64: amd-seattle: Adding device tree for AMD Seattle platform   Liviu Dudau
• [RFC PATCH 0/2] arm: pcibios: remove pci_sys_data domain   Liviu Dudau
• [PATCH 0/3] arm64: Add support for Juno development board   Liviu Dudau
• [PATCH 1/3] arm64: defconfig: Enable support for generic EHCI and OHCI platforms   Liviu Dudau
• [PATCH 2/3] arm64: Create link to include/dt-bindings to enable C preprocessor use.   Liviu Dudau
• [PATCH 3/3] arm64: Add Juno SoC device tree.   Liviu Dudau
• [PATCH 3/3] arm64: Add Juno SoC device tree.   Liviu Dudau
• Regarding tx-nocache-copy in the Sheevaplug   Eric Dumazet
• Regarding tx-nocache-copy in the Sheevaplug   Eric Dumazet
• Regarding tx-nocache-copy in the Sheevaplug   Eric Dumazet
• Regarding tx-nocache-copy in the Sheevaplug   Eric Dumazet
• [PATCH] fix for certain sequnce of request_irq can cause irq storm   Evgeniy Dushistov
• [PATCH] fix for certain sequnce of request_irq can cause irq storm   Evgeniy Dushistov
• [PATCH] fix for certain sequnce of request_irq can cause irq storm   Evgeniy Dushistov
• [BISECTED] arm: mvebu: Kernel hang after ae9304c9d311 if OF_SELFTEST=y   Arnaud Ebalard
• [BISECTED] arm: mvebu: Kernel hang after ae9304c9d311 if OF_SELFTEST=y   Arnaud Ebalard
• [BISECTED] arm: mvebu: Kernel hang after ae9304c9d311 if OF_SELFTEST=y   Arnaud Ebalard
• [PATCHv0 0/2] arm: mvebu: non-critical fixes for NETGEAR ReadyNAS 102   Arnaud Ebalard
• [PATCHv0 1/2] arm: mvebu: fix LED color in NETGEAR ReadyNAS 102 .dts file   Arnaud Ebalard
• [PATCHv0 2/2] arm: mvebu: clarify (e)SATA ports info in NETGEAR ReadyNAS 102 .dts file   Arnaud Ebalard
• [PATCHv0 2/2] arm: mvebu: clarify (e)SATA ports info in NETGEAR ReadyNAS 102 .dts file   Arnaud Ebalard
• [PATCHv0] arm: mvebu: enable rear eSATA ports of NETGEAR ReadyNAS 2120   Arnaud Ebalard
• [PATCHv0] arm: mvebu: add .dts file for Synology DS213j   Arnaud Ebalard
• [RFC PATCH 2/2] arm: pcibios: move to generic PCI domains   Phil Edworthy
• [RFC PATCH 2/2] arm: pcibios: move to generic PCI domains   Phil Edworthy
• [PATCH v7 3/7] sched: add utilization_avg_contrib   Dietmar Eggemann
• [PATCH v3 21/27] Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq   Michael Ellerman
• [PATCH] Revert "ARM: pxa: call debug_ll_io_init for earlyprintk"   Dmitry Eremin-Solenikov
• [PATCH 1/2] clocksource: enable pxa_timer for SA-1100 platform   Dmitry Eremin-Solenikov
• [PATCH 2/2] ARM: sa1100: use pxa_timer clocksource driver   Dmitry Eremin-Solenikov
• [PATCH] ARM: debug: move StrongARM debug include to arch/arm/include/debug   Dmitry Eremin-Solenikov
• [PATCH 1/2] ARM: pxa: spitz: register spitz-audio device   Dmitry Eremin-Solenikov
• [PATCH 2/2] ASoC: pxa: Convert poodle to use snd_soc_register_card()   Dmitry Eremin-Solenikov
• [PATCH 1/2] ARM: pxa: spitz: register spitz-audio device   Dmitry Eremin-Solenikov
• [PATCH V2 1/2] ARM: pxa: spitz: register spitz-audio device   Dmitry Eremin-Solenikov
• [PATCH V2 2/2] ASoC: pxa: Convert spitz to use snd_soc_register_card()   Dmitry Eremin-Solenikov
• [PATCH V2 1/2] ARM: pxa: spitz: register spitz-audio device   Dmitry Eremin-Solenikov
• [PATCH 1/2] clocksource: enable pxa_timer for SA-1100 platform   Dmitry Eremin-Solenikov
• [PATCH 0/5] arm: sa1100: fix sa1100 fb and pcmcia w/o cpufreq   Dmitry Eremin-Solenikov
• [PATCH 1/5] arm: sa1100: add cpu clock   Dmitry Eremin-Solenikov
• [PATCH 2/5] arm: sa1100: add a clock alias for sa1111 pcmcia device   Dmitry Eremin-Solenikov
• [PATCH 3/5] fbdev: sa1100fb: make use of device clock   Dmitry Eremin-Solenikov
• [PATCH 4/5] pcmcia: sa1100: make use of device clock   Dmitry Eremin-Solenikov
• [PATCH 5/5] pcmcia: sa1111: provide device clock   Dmitry Eremin-Solenikov
• [PATCH] ARM: pxa: tosa: switch to gpio-charger   Dmitry Eremin-Solenikov
• [PATCH V3 1/2] ARM: pxa: spitz: register spitz-audio device   Dmitry Eremin-Solenikov
• [PATCH V3 2/2] ASoC: pxa: Convert spitz to use snd_soc_register_card()   Dmitry Eremin-Solenikov
• [PATCH] ARM: sa1100 collie: use gpio-charger instead of pda-power   Dmitry Eremin-Solenikov
• [PATCH V2] ARM: debug: move StrongARM debug include to arch/arm/include/debug   Dmitry Eremin-Solenikov
• [PATCH 00/15] new locomo driver   Dmitry Eremin-Solenikov
• [PATCH 01/15] mfd: add new driver for Sharp LoCoMo   Dmitry Eremin-Solenikov
• [PATCH 02/15] GPIO: port LoCoMo gpio support from old driver   Dmitry Eremin-Solenikov
• [PATCH 03/15] leds: port locomo leds driver to new locomo core   Dmitry Eremin-Solenikov
• [PATCH 04/15] input: convert LoCoMo keyboard driver to use new locomo core   Dmitry Eremin-Solenikov
• [PATCH 05/15] video: backlight: add new locomo backlight driver   Dmitry Eremin-Solenikov
• [PATCH 06/15] video: lcd: add LoCoMo LCD driver   Dmitry Eremin-Solenikov
• [PATCH 07/15] video: backlight: drop old locomo bl/lcd driver   Dmitry Eremin-Solenikov
• [PATCH 08/15] ARM: sa1100: make collie use new locomo drivers   Dmitry Eremin-Solenikov
• [PATCH 09/15] ARM: sa1100: don't preallocate IRQ space for locomo   Dmitry Eremin-Solenikov
• [PATCH 10/15] ARM: pxa: poodle: use new LoCoMo driver   Dmitry Eremin-Solenikov
• [PATCH 11/15] sound: soc: poodle: make use of new locomo GPIO interface   Dmitry Eremin-Solenikov
• [PATCH 12/15] ARM: pxa: poodle: don't preallocate IRQ space for locomo   Dmitry Eremin-Solenikov
• [PATCH 13/15] ARM: drop old LoCoMo driver   Dmitry Eremin-Solenikov
• [PATCH 14/15] gpio: locomo: implement per-pin irq handling   Dmitry Eremin-Solenikov
• [PATCH 15/15] spi: add locomo SPI driver   Dmitry Eremin-Solenikov
• [PATCH 00/15] new locomo driver   Dmitry Eremin-Solenikov
• [PATCH 11/15] sound: soc: poodle: make use of new locomo GPIO interface   Dmitry Eremin-Solenikov
• [PATCH 06/15] video: lcd: add LoCoMo LCD driver   Dmitry Eremin-Solenikov
• [PATCH] ARM: pxa: tosa: switch to gpio-charger   Dmitry Eremin-Solenikov
• [PATCH 0/5] arm: sa1100: fix sa1100 fb and pcmcia w/o cpufreq   Dmitry Eremin-Solenikov
• [PATCH 00/15] new locomo driver   Dmitry Eremin-Solenikov
• [PATCH 09/15] ARM: sa1100: don't preallocate IRQ space for locomo   Dmitry Eremin-Solenikov
• [PATCH 14/15] gpio: locomo: implement per-pin irq handling   Dmitry Eremin-Solenikov
• [PATCH 02/15] GPIO: port LoCoMo gpio support from old driver   Dmitry Eremin-Solenikov
• [PATCH 01/15] mfd: add new driver for Sharp LoCoMo   Dmitry Eremin-Solenikov
• [PATCH 11/15] sound: soc: poodle: make use of new locomo GPIO interface   Dmitry Eremin-Solenikov
• [PATCH v3 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards   Fabio Estevam
• [PATCH v3 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards   Fabio Estevam
• [PATCH] serial: mxs-auart: add sysrq support   Fabio Estevam
• [PATCH 1/2] ARM: dts: imx6qdl-gw5x: Remove unneeded 'fsl, mode' property   Fabio Estevam
• [PATCH 2/2] ARM: dts: imx6qdl-rex: Remove unneeded 'fsl, mode' property   Fabio Estevam
• [PATCH] serial: mxs-auart: add sysrq support   Fabio Estevam
• [PATCH] ARM: dts: imx28-evk: Let i2c0 run at 100kHz   Fabio Estevam
• [PATCH] imx: thermal: imx_get_temp might be called before the sensor clock ist prepared   Fabio Estevam
• [PATCH] ARM: dts: imx28-evk: remove duplicate property   Fabio Estevam
• [PATCH v2 RESEND] serial: mxs-auart: add sysrq support   Fabio Estevam
• Where is DRAM initialisation done?   Fabio Estevam
• Where is DRAM initialisation done?   Fabio Estevam
• [PATCH v2] ARM: imx6q-pcie doc: Update the clocks descriptions to use defines   Fabio Estevam
• [PATCH] ARM: dts: imx6sx-sdb: Add QSPI support   Fabio Estevam
• [PATCH] ARM: dts: imx6qdl-sabresd: Use IMX6QDL_CLK_CKO define   Fabio Estevam
• [PATCH RESEND] ARM: dts: imx28-evk: Let i2c0 run at 100kHz   Fabio Estevam
• [PATCH] ARM: mx6: Fix suspend/resume with PCI   Fabio Estevam
• [PATCH] usb: ehci/ohci: use SIMPLE_DEV_PM_OPS to support hibernation   Fabio Estevam
• [BISECT] v3.18-rc1 doesn't boot on nitrogen6x i.MX6 board   Fabio Estevam
• [BISECT] v3.18-rc1 doesn't boot on nitrogen6x i.MX6 board   Fabio Estevam
• [PATCH] ARM: l2c: Make l2x0_cache_size_of_parse() return 'int'   Fabio Estevam
• [PATCH 1/2] ARM: dts: imx53: Improve SSI clocks description   Fabio Estevam
• [PATCH v2] dma: imx-sdma: clarify firmare not found warning   Fabio Estevam
• [PATCH v3 2/2] ARM: dts: add initial support for TBS2910 Matrix ARM mini PC   Fabio Estevam
• [PATCH RESEND 1/2] ARM: dts: imx6qdl-gw5x: Remove unneeded 'fsl, mode' property   Fabio Estevam
• [PATCH RESEND 2/2] ARM: dts: imx6qdl-rex: Remove unneeded 'fsl, mode' property   Fabio Estevam
• [PATCH v4 2/2] ARM: dts: add initial support for TBS2910 Matrix ARM mini PC   Fabio Estevam
• [PATCH v6 4/7] ARM: l2c: Add support for overriding prefetch settings   Fabio Estevam
• [PATCH] ARM: l2c: Make l2x0_cache_size_of_parse() return 'int'   Fabio Estevam
• [PATCH] ARM: l2c: Improve l2c310_of_parse() error message   Fabio Estevam
• [PATCH v2] ARM: l2c: Improve l2c310_of_parse() error message   Fabio Estevam
• [PATCH] audio: sai: Add Power Management support   Fabio Estevam
• [alsa-devel] [PATCH v5 0/3] Add Phytec pbab01 audio support   Fabio Estevam
• [PATCH] ARM: dts: imx6sx-sdb: Allow wakeup from buttons   Fabio Estevam
• [PATCH] ARM: imx: Explicitly select CONFIG_SPI   Fabio Estevam
• [PATCH] arch: arm: mach-shmobile: Remove ARCH_HAS_OPP completely   Rolf Evers-Fischer
• [PATCH v4 0/8] phy: miphy28lp: Introduce support for MiPHY28lp   Gabriel FERNANDEZ
• [PATCH v4 1/8] phy: miphy28lp: Add Device Tree bindings for the MiPHY28lp   Gabriel FERNANDEZ
• [PATCH v4 2/8] phy: miphy28lp: Add PHY header file for DT x Driver defines   Gabriel FERNANDEZ
• [PATCH v4 3/8] phy: miphy28lp: Provide support for the MiPHY28lp Generic PHY   Gabriel FERNANDEZ
• [PATCH v4 4/8] ARM: DT: STi: STiH407: Add DT node for MiPHY28lp   Gabriel FERNANDEZ
• [PATCH v4 5/8] phy: miphy28lp: Add SSC support for SATA   Gabriel FERNANDEZ
• [PATCH v4 6/8] phy: miphy28lp: Add SSC support for PCIE   Gabriel FERNANDEZ
• [PATCH v4 7/8] phy: miphy28lp: Tune tx impedance across Soc cuts   Gabriel FERNANDEZ
• [PATCH v4 8/8] ARM: multi_v7_defconfig: Enable MiPHY28lp - ST's Generic (SATA, PCIe & USB3) PHY   Gabriel FERNANDEZ
• [PATCH RFT 0/8] Marvell PXA168 libphy handling and Berlin Ethernet   Florian Fainelli
• [PATCH v3 0/2] bus: brcmstb_gisb: misc fixes   Florian Fainelli
• [PATCH v3 0/2] bus: brcmstb_gisb: misc fixes   Florian Fainelli
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   Florian Fainelli
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   Florian Fainelli
• [GIT PULL] ARM: brcmstb: SMP, Kconfig, earlyprintk and GISB fixes   Florian Fainelli
• [GIT PULL] ARM: brcmstb: SMP, Kconfig, earlyprintk and GISB fixes   Florian Fainelli
• [GIT PULL] ARM: brcmstb: SMP, Kconfig, earlyprintk and GISB fixes   Florian Fainelli
• [GIT PULL] ARM: brcmstb: SMP, Kconfig, earlyprintk and GISB fixes   Florian Fainelli
• [PATCH 0/9] Marvell PXA168 libphy handling and Berlin Ethernet   Florian Fainelli
• [PATCH 0/2] MAINTAINERS: brcmstb entry updates   Florian Fainelli
• [PATCH 1/2] MAINTAINERS: update brcmstb entries   Florian Fainelli
• [PATCH 2/2] MAINTAINERS: add entry for the GISB arbiter driver   Florian Fainelli
• DMA allocations from CMA and fatal_signal_pending check   Florian Fainelli
• [PATCH] ARM: decompressor: ensure I-side picks up relocated code   Florian Fainelli
• [GIT PULL] Broadcom Cygnus SoC defconfig changes   Florian Fainelli
• [GIT PULL] Broadcom Cygnus SoC Device Tree changes   Florian Fainelli
• [GIT PULL] Broadcom Cygnus SoC MAINTAINERS changes   Florian Fainelli
• [GIT PULL] Broadcom Cygnus SoC platforms changes   Florian Fainelli
• DMA allocations from CMA and fatal_signal_pending check   Florian Fainelli
• [PATCH v3 6/8] phy: miphy28lp: Add SSC support for PCIE   Gabriel Fernandez
• [PATCH v3 2/8] phy: miphy28lp: Add MiPHY28lp header file for DT x Driver defines   Gabriel Fernandez
• [PATCH v3 6/8] phy: miphy28lp: Add SSC support for PCIE   Gabriel Fernandez
• [PATCH] ARM: at91: remove at91sam9rl legacy board support   Nicolas Ferre
• [GIT PULL] at91: soc for 3.18 #3   Nicolas Ferre
• [PATCH v3 1/1] ARM: at91/dt: sam9x5: Add CAN device nodes   Nicolas Ferre
• [PATCH v3 1/1] ARM: at91/dt: sam9x5: Add CAN device nodes   Nicolas Ferre
• linux-next: manual merge of the kbuild tree with the arm-soc tree   Nicolas Ferre
• [PATCH v2 2/2] Documentation: dmaengine: Add a documentation for the dma controller API   Nicolas Ferre
• [PATCH v9 1/2] pwm: add support for atmel-hlcdc-pwm device   Nicolas Ferre
• [PATCH v9 2/2] pwm: add DT bindings documentation for atmel-hlcdc-pwm driver   Nicolas Ferre
• [PATCH v2 2/2] Documentation: dmaengine: Add a documentation for the dma controller API   Nicolas Ferre
• [PATCH] at91: sam9x5 dt: add usart dma definitions to dt   Nicolas Ferre
• [PATCH 01/26] ARM: sunxi: Fix GPLv2 wording   Nicolas Ferre
• [PATCH] drivers: video: fbdev: atmel_lcdfb.c: remove unnecessary header   Nicolas Ferre
• [PATCH v9 00/10] rtc: at91sam9: add DT support   Nicolas Ferre
• [PATCH] power: reset: at91-reset: fix power down register   Nicolas Ferre
• [PATCH] pinctrl: at91: use own header   Nicolas Ferre
• [PATCH 1/2] MAINTAINERS: add atmel ssc driver maintainer entry   Nicolas Ferre
• [PATCH] ARM: at91/dt: sam9263: fix PLLB frequencies   Nicolas Ferre
• [PATCH] at91: sam9x5 dt: add usart dma definitions to dt   Nicolas Ferre
• [PATCH] spi/atmel: improve the system suspend/resume functions implementation   Nicolas Ferre
• [PATCH v4 1/1] ARM: at91/dt: sam9x5: Add CAN device nodes   Nicolas Ferre
• [GIT PULL] at91: fixes for 3.18 #1   Nicolas Ferre
• [PATCH 1/2] clk: samsung: exynos5440: move restart code into clock driver   Tomasz Figa
• [PATCH 2/2] ARM: EXYNOS: PMU: move restart code into pmu driver   Tomasz Figa
• [PATCH v2 0/5] pinctrl: samsung: Data structure clean-up   Tomasz Figa
• [PATCH v2 1/5] pinctrl: samsung: Make samsung_pinctrl_get_soc_data use ERR_PTR()   Tomasz Figa
• [PATCH v2 2/5] pinctrl: samsung: Drop unused label field in samsung_pin_ctrl struct   Tomasz Figa
• [PATCH v2 3/5] pinctrl: samsung: Constify samsung_pin_bank_type struct   Tomasz Figa
• [PATCH v2 4/5] pinctrl: samsung: Constify samsung_pin_ctrl struct   Tomasz Figa
• [PATCH v2 5/5] pinctrl: samsung: Separate per-bank init and runtime data   Tomasz Figa
• [PATCH] [media] Remove references to non-existent PLAT_S5P symbol   Tomasz Figa
• [PATCH v2 0/5] pinctrl: samsung: Data structure clean-up   Tomasz Figa
• [PATCH v5 0/6] Add initial support for pinctrl on Exynos7   Tomasz Figa
• [PATCH v11 0/6] cpufreq: use generic cpufreq drivers for exynos platforms   Tomasz Figa
• [PATCH v11 0/6] cpufreq: use generic cpufreq drivers for exynos platforms   Tomasz Figa
• [PATCH v2 6/7] arm64: dts: Add nodes for mmc, i2c, rtc, watchdog on Exynos7   Tomasz Figa
• [PATCH 1/5] ARM: EXYNOS: Add EXYNOS4415 SoC ID   Tomasz Figa
• [PATCHv3 2/3] ARM: dts: Add sleep mode pin configuration for exynos3250-rinato   Tomasz Figa
• [PATCH v5 0/6] Add initial support for pinctrl on Exynos7   Tomasz Figa
• [PATCH 2/5] clk: samsung: exynos4415: Add clocks using common clock framework   Tomasz Figa
• [PATCH 5/5] ARM: dts: Add dts files for Exynos4415 SoC   Tomasz Figa
• [PATCH 1/1] usb: chipidea: Fix oops when removing the ci_hdrc module   Torsten Fleischer
• [PATCH 7/7] efi_rtc: probe function error out in case no efi runtime enabled   Matt Fleming
• [PATCH] arm64/efi: set PE/COFF file alignment to 512 bytes   Matt Fleming
• [PATCH 42/44] efi: Register poweroff handler with kernel poweroff handler   Matt Fleming
• [PATCH 42/44] efi: Register poweroff handler with kernel poweroff handler   Matt Fleming
• [PATCH] arm64/efi: set PE/COFF file alignment to 512 bytes   Matt Fleming
• [PATCH 07/10] efi: dmi: add support for SMBIOS 3.0 UEFI configuration table   Matt Fleming
• [PATCH 00/10] arm64 EFI patches for 3.19   Matt Fleming
• CMA region and highmem   Gregory Fong
• [PATCH] ARM: Clarify do_div() usage   Gregory Fong
• [PATCH 1/3] ARM: Add default SPARSEMEM settings   Gregory Fong
• [PATCH 2/3] ARM: Remove redundant ARCH_SPARSEMEM_DEFAULT setting   Gregory Fong
• [PATCH 3/3] ARM: Allow either FLATMEM or SPARSEMEM on the multi-v7 build   Gregory Fong
• [PATCH 1/2] MAINTAINERS: update brcmstb entries   Gregory Fong
• [PATCH v3] arm64/efi: efistub: jump to 'stext' directly, not through the header   Roy Franz
• [PATCH v3] arm64/efi: efistub: jump to 'stext' directly, not through the header   Roy Franz
• [PATCH] arm64/efi: set PE/COFF section alignment to 4 KB   Roy Franz
• [PATCH] arm64/efi: set PE/COFF file alignment to 512 bytes   Roy Franz
• [PATCH] arm64/efi: set PE/COFF file alignment to 512 bytes   Roy Franz
• [PATCH] efi: efi-stub: notify on DTB absence   Roy Franz
• [PATCHv2] efi: efi-stub: notify on DTB absence   Roy Franz
• [PATCH v2 04/10] arm64/efi: invert UEFI memory region reservation logic   Roy Franz
• [PATCH 3/3] ARM: dts: mt8135: Add Reset Controller for MediaTek SoC   Flora Fu
• [PATCH v3 7/8] clk: Make clk API return per-user struct clk instances   Kodiak Furr
• [PATCH v3 0/5] ARM: sunxi: Add basic support for Allwinner A80 SoC   Andreas Färber
• [PATCH v4] ARM: sun7i: add support for A20-OLinuXino-Lime2   Andreas Färber
• [PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella   Andreas Färber
• [PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella   Andreas Färber
• [PATCH] arm64: amd-seattle: Adding device tree for AMD Seattle platform   Andreas Färber
• [PATCH] arm64: amd-seattle: Adding device tree for AMD Seattle platform   Andreas Färber
• [RFC 4/7] soc: qcom: Add Shared Memory Manager driver   Andreas Färber
• [PATCH 0/5] ARM: sunxi: Add support for USB OTG PHY   Andreas Färber
• [PATCH 4/6] ARM: dts: sun9i: Add GPIO LEDs for A80 Optimus board   Andreas Färber
• [PATCH v3] ARM: dts: Add initial DTS file for Sony Xperia Z1 phone   Kumar Gala
• [PATCH v2 3/3] ARM: dts: qcom: Add SDHC nodes for APQ8084 platform   Kumar Gala
• [GIT PULL] qcom SoC changes for v3.18   Kumar Gala
• [GIT PULL] qcom DT changes for v3.18-3   Kumar Gala
• [PATCH v4] ARM: ls1021a: add gating clocks to IP blocks.   Kumar Gala
• [PATCHv5 6/6] ARM: imx: Add Freescale LS1021A SMP support   Kumar Gala
• [PATCH v6] PCI: Layerscape: Add Layerscape PCIe driver   Kumar Gala
• [PATCH v6] PCI: Layerscape: Add Layerscape PCIe driver   Kumar Gala
• [PATCH] tty/serial: earlycon: Fix print for implied MMIO case   Kumar Gala
• [PATCHv5 6/6] ARM: imx: Add Freescale LS1021A SMP support   Kumar Gala
• [PATCH] tty: serial: msm: Fix lock init issue with earlycon   Kumar Gala
• [PATCH v3 2/6] uio: Add new UIO_MEM_PHYS_CACHE type for mem regions   Kumar Gala
• [PATCH v3 2/6] uio: Add new UIO_MEM_PHYS_CACHE type for mem regions   Kumar Gala
• [PATCH 0/6] ARM: add machine and dts files for Amlogic Meson8   Beniamino Galvani
• [PATCH 1/6] ARM: meson: add meson8 machine definition   Beniamino Galvani
• [PATCH 2/6] ARM: dts: add dtsi for Amlogic Meson8 SoCs   Beniamino Galvani
• [PATCH 3/6] ARM: dts: add dts for Tronsmart S89 Elite TV box   Beniamino Galvani
• [PATCH 4/6] of: add vendor prefix for Tronsmart   Beniamino Galvani
• [PATCH 5/6] ARM: document Tronsmart compatible properties   Beniamino Galvani
• [PATCH 6/6] ARM: meson: document meson8 compatible properties   Beniamino Galvani
• [PATCH 1/6] ARM: meson: add meson8 machine definition   Beniamino Galvani
• [PATCH 1/6] ARM: meson: add meson8 machine definition   Beniamino Galvani
• [PATCH v2 0/7] ARM: meson: add support for Meson8   Beniamino Galvani
• [PATCH v2 1/7] ARM: meson: add meson8 support   Beniamino Galvani
• [PATCH v2 2/7] ARM: dts: add dtsi for Amlogic Meson8 SoCs   Beniamino Galvani
• [PATCH v2 3/7] ARM: dts: add dts for Tronsmart S89 Elite TV box   Beniamino Galvani
• [PATCH v2 4/7] of: add vendor prefix for Tronsmart   Beniamino Galvani
• [PATCH v2 5/7] ARM: document Tronsmart compatible properties   Beniamino Galvani
• [PATCH v2 6/7] ARM: meson: document meson8 compatible properties   Beniamino Galvani
• [PATCH v2 7/7] ARM: meson: enable L2 cache   Beniamino Galvani
• [PATCH 0/3] Pinctrl driver for Amlogic Meson SoCs   Beniamino Galvani
• [PATCH 1/3] pinctrl: add driver for Amlogic Meson SoCs   Beniamino Galvani
• [PATCH 2/3] pinctrl: meson: add device tree bindings documentation   Beniamino Galvani
• [PATCH 3/3] ARM: dts: meson8: add pinctrl and gpio nodes   Beniamino Galvani
• [PATCH 1/3] ARM: meson: reset: Add reset controller for MesonX SoCs   Beniamino Galvani
• [PATCH 0/3] media: rc: add support for Amlogic Meson IR receiver   Beniamino Galvani
• [PATCH 1/3] media: rc: add driver for Amlogic Meson IR remote receiver   Beniamino Galvani
• [PATCH 2/3] media: rc: meson: document device tree bindings   Beniamino Galvani
• [PATCH 3/3] ARM: dts: meson: add dts nodes for IR receiver   Beniamino Galvani
• [PATCH v2 0/3] Pinctrl driver for Amlogic Meson SoCs   Beniamino Galvani
• [PATCH v2 1/3] pinctrl: add driver for Amlogic Meson SoCs   Beniamino Galvani
• [PATCH v2 2/3] pinctrl: meson: add device tree bindings documentation   Beniamino Galvani
• [PATCH v2 3/3] ARM: dts: meson8: add pinctrl and gpio nodes   Beniamino Galvani
• [PATCH] ARM: sunxi_defconfig: enable CONFIG_REGULATOR   Beniamino Galvani
• [PATCH 1/3] pinctrl: add driver for Amlogic Meson SoCs   Beniamino Galvani
• [PATCH 2/3] pinctrl: meson: add device tree bindings documentation   Beniamino Galvani
• [PATCH] drivers: net: ethernet: xilinx: xilinx_emaclite: Compatible with 'xlnx,xps-ethernetlite-2.00.b' for QEMU using   Chen Gang
• [PATCH] drivers: net: ethernet: xilinx: xilinx_emaclite: Compatible with 'xlnx,xps-ethernetlite-2.00.b' for QEMU using   Chen Gang
• [PATCH v4 0/3] i2c: hix5hd2: add i2c controller driver   Zhangfei Gao
• [PATCH v4 1/3] i2c: hix5hd2: add devicetree documentation   Zhangfei Gao
• [PATCH v4 2/3] i2c: hix5hd2: add i2c controller driver   Zhangfei Gao
• [PATCH v4 3/3] ARM: dts: hix5hd2: add i2c node   Zhangfei Gao
• [PATCH v5 0/3] i2c: hix5hd2: add i2c controller driver   Zhangfei Gao
• [PATCH v5 1/3] i2c: hix5hd2: add devicetree documentation   Zhangfei Gao
• [PATCH v5 2/3] i2c: hix5hd2: add i2c controller driver   Zhangfei Gao
• [PATCH v5 3/3] ARM: dts: hix5hd2: add i2c node   Zhangfei Gao
• [PATCH v4 00/10] hix5hd2 add some nodes   Zhangfei Gao
• [PATCH v4 01/10] ARM: dts: hix5hd2: add gmac node   Zhangfei Gao
• [PATCH v4 02/10] ARM: dts: hix5hd2: add mmc node   Zhangfei Gao
• [PATCH v4 03/10] ARM: dts: hix5hd2: add usb node   Zhangfei Gao
• [PATCH v4 04/10] ARM: dts: hix5hd2: add sata node   Zhangfei Gao
• [PATCH v4 05/10] ARM: dts: hix5hd2: add gpio node   Zhangfei Gao
• [PATCH v4 06/10] ARM: dts: hix5hd2: add wdg node   Zhangfei Gao
• [PATCH v4 07/10] ARM: dts: hix5hd2: add ir node   Zhangfei Gao
• [PATCH v4 08/10] ARM: dts: hix5hd2: add i2c node   Zhangfei Gao
• [PATCH v4 09/10] ARM: dts: hix5hd2: add reboot node   Zhangfei Gao
• [PATCH v4 10/10] ARM: hisi_defconfig: add driver support for hix5hd2   Zhangfei Gao
• [PATCH] nand: omap2: fix building with CONFIG_MTD_NAND_OMAP_BCH=m   Ezequiel Garcia
• [PATCH] nand: omap2: fix building with CONFIG_MTD_NAND_OMAP_BCH=m   Ezequiel Garcia
• [RFC/PATCH] i2c: pxa: Use suspend() and resume() instead of the _noirq hooks   Ezequiel Garcia
• [RESEND/PATCH] i2c: pxa: Use suspend() and resume() instead of the _noirq hooks   Ezequiel Garcia
• [PATCH 0/2] Marvell Armada 375/38x MPIC/MSI fixes   Ezequiel Garcia
• [PATCH 0/2] Marvell Armada 375/38x MPIC/MSI fixes   Ezequiel Garcia
• [PATCH 0/4] Make Armada 375 use the reference clock when possible   Ezequiel Garcia
• [PATCH 1/4] clocksource: armada-370-xp: Add missing clock enable   Ezequiel Garcia
• [PATCH 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC   Ezequiel Garcia
• [PATCH 3/4] clocksource: armada-370-xp: Use the reference clock on A375 SoC   Ezequiel Garcia
• [PATCH 4/4] ARM: dts: Enable the reference clock for timer and watchdog on Armada 375 SoC   Ezequiel Garcia
• [PATCH 0/7] Armada 375/38x perf support, and a bonus irqchip driver simplification   Ezequiel Garcia
• [PATCH 1/7] irqchip: armada-370-xp: Simplify interrupt map, mask and unmask   Ezequiel Garcia
• [PATCH 2/7] irqchip: armada-370-xp: Initialize per cpu registers when CONFIG_SMP=N   Ezequiel Garcia
• [PATCH 3/7] irqchip: armada-370-xp: Introduce a is_percpu_irq() helper for readability   Ezequiel Garcia
• [PATCH 4/7] irqchip: armada-370-xp: Enable Performance Counter interrupts   Ezequiel Garcia
• [PATCH 5/7] ARM: mvebu: Enable Performance Monitor Unit on Armada 375 SoC   Ezequiel Garcia
• [PATCH 6/7] ARM: mvebu: Enable Performance Monitor Unit on Armada 380/385 SoC   Ezequiel Garcia
• [PATCH 7/7] ARM: mvebu: Enable perf support in mvebu_v7_defconfig   Ezequiel Garcia
• [PATCH 0/4] Make Armada 375 use the reference clock when possible   Ezequiel Garcia
• [PATCH 3/7] irqchip: armada-370-xp: Introduce a is_percpu_irq() helper for readability   Ezequiel Garcia
• [PATCH 3/4] clocksource: armada-370-xp: Use the reference clock on A375 SoC   Ezequiel Garcia
• [PATCH 4/4] ARM: dts: Enable the reference clock for timer and watchdog on Armada 375 SoC   Ezequiel Garcia
• [PATCH 0/4] Make Armada 375 use the reference clock when possible   Ezequiel Garcia
• [PATCH 7/7] ARM: mvebu: Enable perf support in mvebu_v7_defconfig   Ezequiel Garcia
• [PATCH 5/7] ARM: mvebu: Enable Performance Monitor Unit on Armada 375 SoC   Ezequiel Garcia
• [PATCH 6/7] ARM: mvebu: Enable Performance Monitor Unit on Armada 380/385 SoC   Ezequiel Garcia
• [RESEND/PATCH] i2c: pxa: Use suspend() and resume() instead of the _noirq hooks   Ezequiel Garcia
• [PATCH 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC   Ezequiel Garcia
• [PATCH 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC   Ezequiel Garcia
• [PATCH 5/7] ARM: mvebu: Enable Performance Monitor Unit on Armada 375 SoC   Ezequiel Garcia
• [PATCH 0/4] Make Armada 375 use the reference clock when possible   Ezequiel Garcia
• [PATCH 5/7] ARM: mvebu: Enable Performance Monitor Unit on Armada 375 SoC   Ezequiel Garcia
• [PATCH 0/4] Make Armada 375 use the reference clock when possible   Ezequiel Garcia
• [PATCH 0/4] Make Armada 375 use the reference clock when possible   Ezequiel Garcia
• [PATCH v2 0/4] Make Armada 375 use the reference clock when possible   Ezequiel Garcia
• [PATCH v2 1/4] clocksource: armada-370-xp: Add missing clock enable   Ezequiel Garcia
• [PATCH v2 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC   Ezequiel Garcia
• [PATCH v2 3/4] clocksource: armada-370-xp: Use the reference clock on A375 SoC   Ezequiel Garcia
• [PATCH v2 4/4] ARM: mvebu: Enable the reference clock for timer and watchdog on Armada 375 SoC   Ezequiel Garcia
• [PATCH RFC V3 2/3] mxs: add driver for ocotp in i.MX23 and i.MX28   Ezequiel Garcia
• [PATCH 5/7] ARM: mvebu: Enable Performance Monitor Unit on Armada 375 SoC   Ezequiel Garcia
• [PATCH 1/4] ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller   Matthew Garrett
• [PATCH 1/4] ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller   Matthew Garrett
• [PATCH 1/4] ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller   Matthew Garrett
• 3.17-rc6 on ODROID: ERROR: Bad of_node_put() on /ehci at 12580000/port at 1   Vivek Gautam
• [PATCH 3/7] clk: samsung: exynos7: add clocks for RTC block   Vivek Gautam
• [PATCH 2/7] clk: samsung: exynos7: add clocks for MMC block   Vivek Gautam
• [PATCH] mmc: dw_mmc: exynos: Add support for exynos7   Vivek Gautam
• [PATCH] mmc: dw_mmc: exynos: Add support for exynos7   Vivek Gautam
• [PATCH v7 0/2] Fine tune USB 3.0 PHY on exynos5420   Vivek Gautam
• [PATCH v7 1/2] usb: host: xhci-plat: Get PHYs for xhci's hcds   Vivek Gautam
• [PATCH v7 2/2] phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800   Vivek Gautam
• [PATCH v4 1/4] serial: mxs-auart: clean get_mctrl and set_mctrl   Richard Genoud
• [PATCH v4 2/4] serial: mxs-auart: use mctrl_gpio helpers for handling modem signals   Richard Genoud
• [PATCH 3/4] serial: mxs-auart: add interrupts for modem control lines   Richard Genoud
• [PATCH v4 2/4] serial: mxs-auart: use mctrl_gpio helpers for handling modem signals   Richard Genoud
• [PATCH v3 7/9] irqchip/irq-mxs.c: add asm9260 support   Thomas Gleixner
• [PATCH v3 3/4] irq: Allow multiple clients to register for irq affinity notification   Thomas Gleixner
• [PATCH v3 3/4] irq: Allow multiple clients to register for irq affinity notification   Thomas Gleixner
• [PATCH] ARM: integrator: move AP timer to clocksource   Thomas Gleixner
• [PATCH v3 3/4] irq: Allow multiple clients to register for irq affinity notification   Thomas Gleixner
• [PATCH v7 02/10] ARM: add lolevel debug support for asm9260   Thomas Gleixner
• [PATCH v7 05/10] ARM: irqchip: mxs: add Alpascale ASM9260 support   Thomas Gleixner
• [PATCH v7 05/10] ARM: irqchip: mxs: add Alpascale ASM9260 support   Thomas Gleixner
• [PATCH] genirq: Introduce irq_read_line()   Thomas Gleixner
• [PATCH] genirq: Introduce irq_read_line()   Thomas Gleixner
• [PATCH 1/2] clocksource: enable pxa_timer for SA-1100 platform   Thomas Gleixner
• [PATCH 1/3] genirq: Allow the irqchip state of an IRQ to be save/restored   Thomas Gleixner
• [PATCH 1/3] genirq: Allow the irqchip state of an IRQ to be save/restored   Thomas Gleixner
• [PATCH 1/3] genirq: Add support for priority-drop/deactivate interrupt controllers   Thomas Gleixner
• [PATCH 1/3] genirq: Add support for priority-drop/deactivate interrupt controllers   Thomas Gleixner
• [PATCH v8 0/9] initial suport for Alphascale ASM9260   Thomas Gleixner
• [PATCH] ARM/ARM64: arch-timer: fix arch_timer_probed logic   Thomas Gleixner
• [PATCH 1/3] genirq: Add support for priority-drop/deactivate interrupt controllers   Thomas Gleixner
• [percpu] Convert remaining __get_cpu_var uses in 3.18-rcX   Thomas Gleixner
• [Patch Part2 v3 01/24] irqdomain: Introduce new interfaces to support hierarchy irqdomains   Thomas Gleixner
• [PATCH 1/3] genirq: Add support for priority-drop/deactivate interrupt controllers   Thomas Gleixner
• [Patch Part2 v3 01/24] irqdomain: Introduce new interfaces to support hierarchy irqdomains   Thomas Gleixner
• [Patch Part2 v3 15/24] x86, MSI: Use hierarchy irqdomain to manage MSI interrupts   Thomas Gleixner
• [Patch Part2 v3 15/24] x86, MSI: Use hierarchy irqdomain to manage MSI interrupts   Thomas Gleixner
• [PATCH 1/3] genirq: Add support for priority-drop/deactivate interrupt controllers   Thomas Gleixner
• [Patch Part2 v3 15/24] x86, MSI: Use hierarchy irqdomain to manage MSI interrupts   Thomas Gleixner
• [PATCH 1/3] genirq: Add support for priority-drop/deactivate interrupt controllers   Thomas Gleixner
• [V9 PATCH 2/2] irqchip: gicv2m: Add supports for ARM GICv2m MSI(-X)   Thomas Gleixner
• [Patch Part2 v3 15/24] x86, MSI: Use hierarchy irqdomain to manage MSI interrupts   Thomas Gleixner
• [PATCH v2 5/5] tty/serial: Add earlycon support for Spreadtrum serial driver   One Thousand Gnomes
• [PATCH v2 5/5] tty/serial: Add earlycon support for Spreadtrum serial driver   One Thousand Gnomes
• [PATCH v2 0/3] ARM: dts: sun7i: Add Banana Pi board   Hans de Goede
• [PATCH v2 1/3] ARM: dts: sun7i: Add spi0_pins_a pinctrl setting   Hans de Goede
• [PATCH v2 2/3] ARM: dts: sun7i: Add uart3_pins_b pinctrl setting   Hans de Goede
• [PATCH v2 3/3] ARM: dts: sun7i: Add Banana Pi board   Hans de Goede
• [PATCH 1/2] ARM: dts: sun7i: Add mmc2_pins_a pinctrl definition   Hans de Goede
• [PATCH 2/2] ARM: dts: sun7i: Add Mele M3 board   Hans de Goede
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Hans de Goede
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Hans de Goede
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Hans de Goede
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Hans de Goede
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Hans de Goede
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Hans de Goede
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Hans de Goede
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Hans de Goede
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Hans de Goede
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Hans de Goede
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Hans de Goede
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Hans de Goede
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Hans de Goede
• [PATCH v2 0/5] simplefb: Add clock support to simplefb   Hans de Goede
• [PATCH v2 1/5] simplefb: Add simplefb MAINTAINERS entry   Hans de Goede
• [PATCH v2 2/5] dt-bindings: Add a clocks property to the simple-framebuffer binding   Hans de Goede
• [PATCH v2 3/5] simplefb: formalize pseudo palette handling   Hans de Goede
• [PATCH v2 4/5] simplefb: add goto error path to probe   Hans de Goede
• [PATCH v2 5/5] simplefb: add clock handling code   Hans de Goede
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Hans de Goede
• [PATCH v2 2/5] dt-bindings: Add a clocks property to the simple-framebuffer binding   Hans de Goede
• [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   Hans de Goede
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   Hans de Goede
• [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   Hans de Goede
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   Hans de Goede
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   Hans de Goede
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   Hans de Goede
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   Hans de Goede
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   Hans de Goede
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   Hans de Goede
• Fixing boot-time hiccups in your display   Hans de Goede
• Fixing boot-time hiccups in your display   Hans de Goede
• [linux-sunxi] Re: [PATCH v2 5/5] simplefb: add clock handling code   Hans de Goede
• Fixing boot-time hiccups in your display   Hans de Goede
• Fixing boot-time hiccups in your display   Hans de Goede
• [linux-sunxi] [PATCH 0/5] clk: sunxi: Add peripheral bus clock support for A80   Hans de Goede
• [PATCH 02/26] ARM: sunxi: regulators: Relicense the device tree under GPLv2/X11   Hans de Goede
• [PATCH v2 0/4] input: Add new sun4i-lradc-keys driver   Hans de Goede
• [PATCH v2 1/4] input: Add new sun4i-lradc-keys driver   Hans de Goede
• [PATCH v2 2/4] ARM: dts: sun4i: Add lradc node   Hans de Goede
• [PATCH v2 3/4] ARM: dts: sun5i: Add lradc node   Hans de Goede
• [PATCH v2 4/4] ARM: dts: sun7i: Add lradc node   Hans de Goede
• [PATCH v2 3/4] ARM: dts: sun5i: Add lradc node   Hans de Goede
• [linux-sunxi] Re: [PATCH v2 4/4] ARM: dts: sun7i: Add lradc node   Hans de Goede
• [linux-sunxi] Re: [PATCH v2 3/4] ARM: dts: sun5i: Add lradc node   Hans de Goede
• [PATCH v2 1/4] input: Add new sun4i-lradc-keys driver   Hans de Goede
• [PATCH v3 0/4] input: Add new sun4i-lradc-keys driver   Hans de Goede
• [PATCH v3 1/4] input: Add new sun4i-lradc-keys driver   Hans de Goede
• [PATCH v3 2/4] ARM: dts: sun4i: Add lradc node   Hans de Goede
• [PATCH v3 3/4] ARM: dts: sun5i: Add lradc node   Hans de Goede
• [PATCH v3 4/4] ARM: dts: sun7i: Add lradc node   Hans de Goede
• [PATCH v4 0/5] simplefb: add clock handling code   Hans de Goede
• [PATCH v4 1/5] simplefb: Add simplefb MAINTAINERS entry   Hans de Goede
• [PATCH v4 2/5] dt-bindings: Add a clocks property to the simple-framebuffer binding   Hans de Goede
• [PATCH v4 3/5] simplefb: formalize pseudo palette handling   Hans de Goede
• [PATCH v4 4/5] simplefb: add goto error path to probe   Hans de Goede
• [PATCH v4 5/5] simplefb: add clock handling code   Hans de Goede
• [PATCH v4 0/5] simplefb: add clock handling code   Hans de Goede
• [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code   Hans de Goede
• [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code   Hans de Goede
• [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code   Hans de Goede
• iMX6 sdma firmware error "imx/sdma/sdma-imx6q.bin"   Robin Gong
• iMX6 sdma firmware error "imx/sdma/sdma-imx6q.bin"   Robin Gong
• [PATCH v4 0/3] add power off driver for i.mx6   Robin Gong
• [PATCH 6/7] arm64/kexec: Add core kexec support   Vivek Goyal
• [PATCH 0/7] arm64 kexec kernel patches V3   Vivek Goyal
• [PATCH 6/7] arm64/kexec: Add core kexec support   Vivek Goyal
• [PATCH 6/7] arm64/kexec: Add core kexec support   Vivek Goyal
• [PATCH 6/7] arm64/kexec: Add core kexec support   Vivek Goyal
• [PATCH 6/7] arm64/kexec: Add core kexec support   Vivek Goyal
• [PATCH 6/7] arm64/kexec: Add core kexec support   Vivek Goyal
• [PATCH 6/7] arm64/kexec: Add core kexec support   Vivek Goyal
• [PATCH 0/7] arm64 kexec kernel patches V3   Vivek Goyal
• [PATCH 0/7] arm64 kexec kernel patches V3   Vivek Goyal
• [PATCH 0/7] arm64 kexec kernel patches V3   Vivek Goyal
• [PATCH 6/7] arm64/kexec: Add core kexec support   Vivek Goyal
• [PATCH 0/7] arm64 kexec kernel patches V3   Vivek Goyal
• [PATCH 6/7] arm64/kexec: Add core kexec support   Vivek Goyal
• [PATCH 6/7] arm64/kexec: Add core kexec support   Vivek Goyal
• [PATCH 6/7] arm64/kexec: Add core kexec support   Vivek Goyal
• [RFC PATCH] arm64/efi: use stable virtual mappings for UEFI runtime services   Vivek Goyal
• [PATCH v11 1/6] KVM: Add architecture-specific TLB flush implementations   Alexander Graf
• [PATCH v11 2/6] KVM: Add generic implementation of kvm_vm_ioctl_get_dirty_log   Alexander Graf
• [PATCH] arm64: amd-seattle: Adding device tree for AMD Seattle platform   Alexander Graf
• [PATCH] arm64: amd-seattle: Adding device tree for AMD Seattle platform   Alexander Graf
• [PATCH] arm64: amd-seattle: Adding device tree for AMD Seattle platform   Alexander Graf
• [PATCH] arm64: amd-seattle: Adding device tree for AMD Seattle platform   Alexander Graf
• [PATCH] ARM: decompressor: ensure I-side picks up relocated code   Julien Grall
• [STLinux Kernel] [PATCH 1/3] media: st-rc: move to using reset_control_get_optional   Peter Griffin
• [PATCH 0/4] Touchscreen performance related fixes   Griffis, Brad
• [PATCH v4] ARM: dts: qcom: add CM-QS600 board   Igor Grinberg
• [PATCH] ARM: dts: sbc-t3x: add DVI display data   Igor Grinberg
• [Patch v3] spi: qup: Fix incorrect block transfers   Andy Gross
• [PATCH 1/3] iommu/rockchip: rk3288 iommu driver   Grant Grundler
• [PATCH v6 5/6] sched: replace capacity_factor by usage   Vincent Guittot
• [PATCH v6 5/6] sched: replace capacity_factor by usage   Vincent Guittot
• [PATCH v6 3/6] sched: add utilization_avg_contrib   Vincent Guittot
• [PATCH v6 3/6] sched: add utilization_avg_contrib   Vincent Guittot
• [PATCH v6 5/6] sched: replace capacity_factor by usage   Vincent Guittot
• [PATCH v7 0/7] sched: consolidation of cpu_capacity   Vincent Guittot
• [PATCH v7 1/7] sched: add per rq cpu_capacity_orig   Vincent Guittot
• [PATCH v7 2/7] sched: move cfs task on a CPU with higher capacity   Vincent Guittot
• [PATCH v7 3/7] sched: add utilization_avg_contrib   Vincent Guittot
• [PATCH 4/7] sched: Track group sched_entity usage contributions   Vincent Guittot
• [PATCH v7 5/7] sched: get CPU's usage statistic   Vincent Guittot
• [PATCH v7 6/7] sched: replace capacity_factor by usage   Vincent Guittot
• [PATCH v7 7/7] sched: add SD_PREFER_SIBLING for SMT level   Vincent Guittot
• [PATCH 4/7] sched: Track group sched_entity usage contributions   Vincent Guittot
• [PATCH v7 5/7] sched: get CPU's usage statistic   Vincent Guittot
• [PATCH v7 6/7] sched: replace capacity_factor by usage   Vincent Guittot
• [PATCH v7 6/7] sched: replace capacity_factor by usage   Vincent Guittot
• [PATCH v7 2/7] sched: move cfs task on a CPU with higher capacity   Vincent Guittot
• [PATCH v7 6/7] sched: replace capacity_factor by usage   Vincent Guittot
• [PATCH v7 6/7] sched: replace capacity_factor by usage   Vincent Guittot
• [PATCH v7 2/7] sched: move cfs task on a CPU with higher capacity   Vincent Guittot
• [PATCH v7 5/7] sched: get CPU's usage statistic   Vincent Guittot
• [PATCH v7 6/7] sched: replace capacity_factor by usage   Vincent Guittot
• [PATCH v8 00/10] sched: consolidation of CPU capacity and usage   Vincent Guittot
• [PATCH v8 01/10] sched: add per rq cpu_capacity_orig   Vincent Guittot
• [PATCH v8 02/10] sched: remove frequency scaling from cpu_capacity   Vincent Guittot
• [PATCH v8 03/10] sched: move cfs task on a CPU with higher capacity   Vincent Guittot
• [PATCH v8 04/10] sched: add utilization_avg_contrib   Vincent Guittot
• [PATCH v8 05/10] sched: Track group sched_entity usage contributions   Vincent Guittot
• [PATCH v8 06/10] sched: get CPU's usage statistic   Vincent Guittot
• [PATCH v8 07/10] sched: replace capacity_factor by usage   Vincent Guittot
• [PATCH v8 08/10] sched: add SD_PREFER_SIBLING for SMT level   Vincent Guittot
• [PATCH v8 09/10] sched: Make sched entity usage tracking scale-invariant   Vincent Guittot
• [PATCH v8 10/10] sched: make scale_rt invariant with frequency   Vincent Guittot
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Jason Gunthorpe
• [RFC PATCH 0/2] arm: pcibios: remove pci_sys_data domain   Jason Gunthorpe
• [RFC PATCH 0/2] arm: pcibios: remove pci_sys_data domain   Jason Gunthorpe
• [RFC PATCH 0/2] arm: pcibios: remove pci_sys_data domain   Jason Gunthorpe
• [RFC PATCH 0/2] arm: pcibios: remove pci_sys_data domain   Jason Gunthorpe
• [RFC PATCH 0/2] arm: pcibios: remove pci_sys_data domain   Jason Gunthorpe
• [PATCH v5 00/18] Introduce ACPI for ARM64 based on ACPI 5.1   Hanjun Guo
• [PATCH v5 01/18] ARM64: Move the init of cpu_logical_map(0) before unflatten_device_tree()   Hanjun Guo
• [PATCH v5 02/18] ACPI / table: Add new function to get table entries   Hanjun Guo
• [PATCH v5 03/18] ACPI / table: Count matched and successfully parsed entries without specifying max entries   Hanjun Guo
• [PATCH v5 04/18] ARM64 / ACPI: Get RSDP and ACPI boot-time tables   Hanjun Guo
• [PATCH v5 05/18] ARM64 / ACPI: Introduce sleep-arm.c   Hanjun Guo
• [PATCH v5 06/18] ARM64 / ACPI: Introduce early_param for "acpi" and pass acpi=force to enable ACPI   Hanjun Guo
• [PATCH v5 07/18] ARM64 / ACPI: If we chose to boot from acpi then disable FDT   Hanjun Guo
• [PATCH v5 08/18] ARM64 / ACPI: Make PCI optional for ACPI on ARM64   Hanjun Guo
• [PATCH v5 09/18] ARM64 / ACPI: Parse FADT table to get PSCI flags for PSCI init   Hanjun Guo
• [PATCH v5 10/18] ACPI / table: Print GIC information when MADT is parsed   Hanjun Guo
• [PATCH v5 11/18] ARM64 / ACPI: Parse MADT for SMP initialization   Hanjun Guo
• [PATCH v5 12/18] ACPI / processor: Make it possible to get CPU hardware ID via GICC   Hanjun Guo
• [PATCH v5 13/18] ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi   Hanjun Guo
• [PATCH v5 14/18] ARM64 / ACPI: Add GICv2 specific ACPI boot support   Hanjun Guo
• [PATCH v5 15/18] ARM64 / ACPI: Parse GTDT to initialize arch timer   Hanjun Guo
• [PATCH v5 16/18] ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64   Hanjun Guo
• [PATCH v5 17/18] ARM64 / ACPI: Enable ARM64 in Kconfig   Hanjun Guo
• [PATCH v5 18/18] Documentation: ACPI for ARM64   Hanjun Guo
• [PATCH v5 12/18] ACPI / processor: Make it possible to get CPU hardware ID via GICC   Hanjun Guo
• [RFC PATCH] dt:numa: adding numa node mapping for memory nodes.   Hanjun Guo
• [RFC PATCH] dt:numa: adding numa node mapping for memory nodes.   Hanjun Guo
• [RFC PATCH 4/4] arm64:numa: adding numa support for arm64 platforms.   Hanjun Guo
• [PATCH v5 12/18] ACPI / processor: Make it possible to get CPU hardware ID via GICC   Hanjun Guo
• [PATCH v5 12/18] ACPI / processor: Make it possible to get CPU hardware ID via GICC   Hanjun Guo
• [PATCH 1/3] ACPI / processor: Update the comments in processor.h   Hanjun Guo
• [PATCH 2/3] ACPI / processor: Convert apic_id to phys_id to make it arch agnostic   Hanjun Guo
• [PATCH 3/3] ACPI / processor: Rename acpi_(un)map_lsapic() to acpi_(un)map_cpu()   Hanjun Guo
• [PATCH 3/3] ACPI / processor: Rename acpi_(un)map_lsapic() to acpi_(un)map_cpu()   Hanjun Guo
• [PATCH 1/1] ARM: imx_v6_v7_defconfig: enable more USB functions   Shawn Guo
• [PATCH] MAINTAINERS: update Shawn's email address   Shawn Guo
• [PATCH v2 1/1] ARM: dts: imx6x: Add enet2 support for imx6sx-sdb board   Shawn Guo
• [PATCHv5 1/6] ARM: dts: Add SoC level device tree support for LS1021A   Shawn Guo
• [PATCHv5 1/6] ARM: dts: Add SoC level device tree support for LS1021A   Shawn Guo
• [PATCHv5 2/6] ARM: dts: Add initial LS1021A QDS board dts support   Shawn Guo
• [PATCHv5 3/6] ARM: dts: Add initial LS1021A TWR board dts support   Shawn Guo
• [PATCHv5 6/6] ARM: imx: Add Freescale LS1021A SMP support   Shawn Guo
• [PATCH] ARM: i.MX6: Fix "emi" clock name typo   Shawn Guo
• [PATCH v2] ARM: imx6q-pcie doc: Update the clocks descriptions to use defines   Shawn Guo
• [PATCH v4] ARM: ls1021a: add gating clocks to IP blocks.   Shawn Guo
• [PATCH 05/12] soc/tegra: Add efuse driver for Tegra   Shawn Guo
• [PATCH] ARM: dts: imx6qdl-sabresd: Use IMX6QDL_CLK_CKO define   Shawn Guo
• [PATCH RESEND] ARM: dts: imx28-evk: Let i2c0 run at 100kHz   Shawn Guo
• [PATCH 1/2] ARM: dts: imx53: Improve SSI clocks description   Shawn Guo
• [PATCH v2] arm: dts: add initial support for TBS2910 Matrix ARM mini PC   Shawn Guo
• [PATCH v2] arm: dts: add initial support for TBS2910 Matrix ARM mini PC   Shawn Guo
• [PATCHv6 0/6] ARM: imx: Add Freescale LS1021A SoC and board support   Shawn Guo
• [PATCH 1/4] ARM: dts: hummingboard: Split HummingBoard DT to support s/dl and d/q   Shawn Guo
• [PATCH v2] arm: dts: add initial support for TBS2910 Matrix ARM mini PC   Shawn Guo
• [GIT PULL] ARM: imx: fixes for 3.18   Shawn Guo
• [PATCH] ARM: DT: apq8064: Add Support for SD Card Detect for ifc6410 board   Pramod Gurav
• [PATCH] ARM: DT: apq8064: Add Support for SD Card Detect for ifc6410 board   Pramod Gurav
• [PATCH v2] ARM: DT: apq8064: Add Support for SD Card Detect for ifc6410 board   Pramod Gurav
• [RFC PATCH 0/1] arm64: Fix /proc/cpuinfo   Greg Hackmann
• [RFC 1/2] PM / Domains: Power on domain early during system resume   Andrzej Hajda
• [PATCH] pwm-backlight: Turn off pwm backlight in probe   Jingoo Han
• [PATCH 05/15] video: backlight: add new locomo backlight driver   Jingoo Han
• [PATCH 06/15] video: lcd: add LoCoMo LCD driver   Jingoo Han
• [PATCH v2 0/4] PM / Domains: Fix race conditions during boot   Ulf Hansson
• [PATCH v2 1/4] PM / Domains: Remove pm_genpd_dev_need_restore() API   Ulf Hansson
• [PATCH v2 2/4] ARM: exynos: Ensure PM domains are powered at initialization   Ulf Hansson
• [PATCH v2 3/4] PM / Domains: Expect PM domains being powered at initialization   Ulf Hansson
• [PATCH v2 4/4] PM / Domains: Enforce PM domains to stay powered during boot   Ulf Hansson
• [PATCH v2 1/4] PM / Domains: Remove pm_genpd_dev_need_restore() API   Ulf Hansson
• [PATCH v2 2/4] ARM: exynos: Ensure PM domains are powered at initialization   Ulf Hansson
• [PATCH v2 2/4] ARM: exynos: Ensure PM domains are powered at initialization   Ulf Hansson
• [PATCH v2 1/4] PM / Domains: Remove pm_genpd_dev_need_restore() API   Ulf Hansson
• [PATCH] ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board   Ulf Hansson
• [PATCH v2 0/4] PM / Domains: Fix race conditions during boot   Ulf Hansson
• [PATCH v2 1/4] PM / Domains: Remove pm_genpd_dev_need_restore() API   Ulf Hansson
• [PATCH] ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board   Ulf Hansson
• [PATCH] ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board   Ulf Hansson
• [PATCH] ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board   Ulf Hansson
• [PATCH v5 07/11] mmc: sdio: Convert to dev_pm_domain_attach|detach()   Ulf Hansson
• [PATCH v3 0/9] PM / Domains: Fix race conditions during boot   Ulf Hansson
• [PATCH v3 1/9] PM / Domains: Add dev_pm_domain_get|put() APIs   Ulf Hansson
• [PATCH v3 2/9] PM / Domains: Enable genpd to support ->get|put() callbacks   Ulf Hansson
• [PATCH v3 3/9] amba: Keep PM domain powered during ->probe()   Ulf Hansson
• [PATCH v3 4/9] drivercore / platform: Keep PM domain powered during ->probe()   Ulf Hansson
• [PATCH v3 5/9] i2c: core: Keep PM domain powered during ->probe()   Ulf Hansson
• [PATCH v3 6/9] spi: core: Keep PM domain powered during ->probe()   Ulf Hansson
• [PATCH v3 7/9] mmc: core: Attach PM domain prior probing of SDIO func driver   Ulf Hansson
• [PATCH v3 8/9] mmmc: core: Keep PM domain powered during ->probe() of SDIO func driver   Ulf Hansson
• [PATCH v3 9/9] PM / Domains: Remove pm_genpd_dev_need_restore() API   Ulf Hansson
• [PATCH 0/7] [media] exynos-gsc: Fixup PM support   Ulf Hansson
• [PATCH 1/7] [media] exynos-gsc: Simplify clock management   Ulf Hansson
• [PATCH 2/7] [media] exynos-gsc: Convert gsc_m2m_resume() from int to void   Ulf Hansson
• [PATCH 3/7] [media] exynos-gsc: Make driver functional without CONFIG_PM_RUNTIME   Ulf Hansson
• [PATCH 4/7] [media] exynos-gsc: Make runtime PM callbacks available for CONFIG_PM   Ulf Hansson
• [PATCH 5/7] [media] exynos-gsc: Fixup system PM   Ulf Hansson
• [PATCH 6/7] [media] exynos-gsc: Fixup clock management at ->remove()   Ulf Hansson
• [PATCH 7/7] [media] exynos-gsc: Do full clock gating at runtime PM suspend   Ulf Hansson
• [PATCH 0/8] ARM: ux500: Add initial support for PM domains   Ulf Hansson
• [PATCH 1/8] dt: bindings: ux500: Add documentation for PM domains   Ulf Hansson
• [PATCH 2/8] dt: bindings: ux500: Add header for PM domains specifiers   Ulf Hansson
• [PATCH 3/8] ARM: ux500: Initial support for PM domains   Ulf Hansson
• [PATCH 4/8] ARM: ux500: Enable Kconfig for the generic PM domain   Ulf Hansson
• [PATCH 5/8] ARM: ux500: Add DT node for ux500 PM domains   Ulf Hansson
• [PATCH 6/8] ARM: ux500: Add sdi devices to the VAPE PM domain   Ulf Hansson
• [PATCH 7/8] ARM: ux500: Add spi and ssp devices to the VAPE PM domain   Ulf Hansson
• [PATCH 8/8] ARM: ux500: Add i2c devices to the VAPE PM domain   Ulf Hansson
• [PATCH v3 1/3] power-domain: add power domain drivers for Rockchip platform   Ulf Hansson
• [PATCH v5 1/3] power-domain: add power domain drivers for Rockchip platform   Ulf Hansson
• [PATCH v5 1/3] power-domain: add power domain drivers for Rockchip platform   Ulf Hansson
• [PATCH v2 2/3] ARM: keystone: pm: switch to use generic pm domains   Ulf Hansson
• [PATCH v2 2/3] ARM: keystone: pm: switch to use generic pm domains   Ulf Hansson
• [PATCH v2 2/3] ARM: keystone: pm: switch to use generic pm domains   Ulf Hansson
• [PATCH v5 1/3] power-domain: add power domain drivers for Rockchip platform   Ulf Hansson
• [PATCH v2 2/3] ARM: keystone: pm: switch to use generic pm domains   Ulf Hansson
• [PATCH v2 2/3] ARM: keystone: pm: switch to use generic pm domains   Ulf Hansson
• [PATCH v2 2/3] ARM: keystone: pm: switch to use generic pm domains   Ulf Hansson
• [PATCH] mmc: sunxi: Remove unused includes of linux/clk-private.h   Ulf Hansson
• [PATCH RESEND 06/12] mmc: sdhci-pxav3: Move I/O clock to private data   Ulf Hansson
• [PATCH RESEND 01/12] mmc: sdhci-pxav2: Drop unused struct sdhci_pxa   Ulf Hansson
• [PATCH RESEND 02/12] mmc: sdhci-pxav3: Respect MMC_DDR52 timing on uhs signaling   Ulf Hansson
• [PATCH RESEND 03/12] mmc: sdhci-pxav3: Move private driver data to driver source   Ulf Hansson
• [PATCH RESEND 04/12] mmc: sdhci-pxav3: Remove unused clk_enable from sdhci_pxa   Ulf Hansson
• [PATCH RESEND 05/12] mmc: sdhci-pxav3: Remove checks for mandatory host clock   Ulf Hansson
• [PATCH v2] mmc: dw_mmc: Reset DMA before enabling IDMAC   Ulf Hansson
• [PATCH] mmc: dw_mmc: rockchip: Don't recalc the clock when it goes off   Ulf Hansson
• [PATCHv2 1/3] mmc: atmel-mci: move mache header to platform_data   Ulf Hansson
• [PATCHv2 2/3] ARM: at91: remove mach/atmel-mci.h   Ulf Hansson
• [PATCHv2 3/3] avr32: remove mach/atmel-mci.h   Ulf Hansson
• [PATCHv2 1/3] mmc: atmel-mci: move mache header to platform_data   Ulf Hansson
• [PATCH RESEND 06/12] mmc: sdhci-pxav3: Move I/O clock to private data   Ulf Hansson
• [PATCH RESEND 07/12] mmc: sdhci-pxav3: Try to get named I/O clock first   Ulf Hansson
• [PATCH RESEND 08/12] mmc: sdhci-pxav3: Get optional core clock   Ulf Hansson
• [PATCH RESEND 09/12] mmc: sdhci-pxav3: Document clocks and additional clock-names property   Ulf Hansson
• [PATCH 0/4] PM / Domains: Handle errors from ->attach_dev() callback   Ulf Hansson
• [PATCH 1/4] PM / Domains: Remove reference counting for the generic_pm_domain_data   Ulf Hansson
• [PATCH 2/4] PM / Domains: Don't allow an existing generic PM domain data   Ulf Hansson
• [PATCH 3/4] PM / Domains: Improve error handling while adding/removing devices   Ulf Hansson
• [PATCH 4/4] PM / Domains: Let the ->attach_dev() callback return an error code   Ulf Hansson
• [PATCH 4/4] PM / Domains: Let the ->attach_dev() callback return an error code   Ulf Hansson
• [PATCH] mmc: atmel-mci: add pm runtime support   Ulf Hansson
• [PATCH 4/4] PM / Domains: Let the ->attach_dev() callback return an error code   Ulf Hansson
• [PATCH] mmc: dw_mmc: add support for the other bit of sdio interrupt   Ulf Hansson
• [PATCH 3/4] PM / Domains: Improve error handling while adding/removing devices   Ulf Hansson
• [PATCH 3/4] PM / Domains: Improve error handling while adding/removing devices   Ulf Hansson
• [PATCH 4/4] PM / Domains: Let the ->attach_dev() callback return an error code   Ulf Hansson
• [PATCH] PM / Domains: Change prototype for the ->attach_dev() callback   Ulf Hansson
• [PATCH v3 0/9] PM / Domains: Fix race conditions during boot   Ulf Hansson
• [PATCH v3 4/9] drivercore / platform: Keep PM domain powered during ->probe()   Ulf Hansson
• [PATCH v3 4/9] drivercore / platform: Keep PM domain powered during ->probe()   Ulf Hansson
• [PATCH 6/7] can: m_can: update to support CAN FD features   Oliver Hartkopp
• [PATCH 6/7] can: m_can: update to support CAN FD features   Oliver Hartkopp
• [PATCH 0/5] ARM: imx: ventana: enable LDO-bypass mode   Tim Harvey
• [PATCH 1/5] regulator: add function to determine if 2 regulators are the same   Tim Harvey
• [PATCH 2/5] regulator: add function to determine if a regulator is in bypass mode   Tim Harvey
• [PATCH 3/5] ARM: dts: imx: add cpu0 alias   Tim Harvey
• [PATCH 4/5] cpufreq: imx6q: add ldo-bypass support   Tim Harvey
• [PATCH 5/5] ARM: imx: ventana: enable LDO bypass mode for GW54xx   Tim Harvey
• [PATCH v2 4/4] ARM: dts: mt8135: Add pinctrl node for mt8135.   Sascha Hauer
• [PATCH] arm: dts: add initial support for TBS2910 Matrix ARM mini PC   Sascha Hauer
• [RFC] pinctrl: Provide a generic device tree binding for per-pin pin controllers   Sascha Hauer
• [PATCH v5 1/1] iommu-api: Add map_sg/unmap_sg functions   Olav Haugan
• [PATCH v5 1/1] iommu-api: Add map_sg/unmap_sg functions   Olav Haugan
• [PATCH v6 0/1] Add iommu map_sg API   Olav Haugan
• [PATCH v6 1/1] iommu-api: Add map_sg function   Olav Haugan
• [PATCH 1/3 V2] CNS3xxx: Fix debug UART.   Krzysztof Hałasa
• [PATCH 3/8] ARM: shmobile: r8a73a4: Add SCIF nodes   Ulrich Hecht
• [PATCH] ARM: dts: imx28-evk: remove duplicate property   Michael Heimpold
• [PATCH] ARM: dts: imx28: add alternative pinmuxing for pwm0 and can1   Michael Heimpold
• [PATCH] ARM: dts: imx28-duckbill: enable spi0, auart0 and i2c0, fix usb0   Michael Heimpold
• [PATCH v10 0/4] APM X-Gene PCIe host controller   Bjorn Helgaas
• [PATCH v10 0/4] APM X-Gene PCIe host controller   Bjorn Helgaas
• [PATCH] PCI: imx6q-pcie doc: Update the clocks descriptions to use defines   Bjorn Helgaas
• [PATCH v1 10/10] uprobes: Remove "weak" from function declarations   Bjorn Helgaas
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Bjorn Helgaas
• [PATCH v3 24/27] IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq   Bjorn Helgaas
• [PATCH v3 02/27] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()   Bjorn Helgaas
• [PATCH v3 05/27] PCI: tegra: Save msi chip in pci_sys_data   Bjorn Helgaas
• [PATCH v3 04/27] arm/MSI: Save MSI chip in pci_sys_data   Bjorn Helgaas
• [PATCH v3 09/27] arm/PCI: Clean unused pcibios_add_bus() and pcibios_remove_bus()   Bjorn Helgaas
• [PATCH v3 10/27] PCI/MSI: Remove useless bus->msi assignment   Bjorn Helgaas
• [PATCH v3 00/27] Use MSI chip framework to configure MSI/MSI-X in all platforms   Bjorn Helgaas
• [PATCH RFC 1/2] drivers: pci: fix window allocation order wrt bus_range filtering   Bjorn Helgaas
• Setting cpu affinity for MSI-X on i.mx6 possible?   Bjorn Helgaas
• [RFC PATCH 2/2] arm: pcibios: move to generic PCI domains   Bjorn Helgaas
• [PATCH] tracing/syscalls: ignore numbers outside NR_syscalls' range   Christoph Hellwig
• [PATCH] VNIC: Adding support for Cavium ThunderX network controller   Stephen Hemminger
• [PATCH] VNIC: Adding support for Cavium ThunderX network controller   Stephen Hemminger
• [PATCH] arm: dma-mapping: fix compilation error when CONFIG_MMU is not present   Stefan Hengelein
• [PATCH] ARM: ixp4xx: remove compilation warnings in io.h   Stefan Hengelein
• [PATCH] arm: dma-mapping: fix compilation error when CONFIG_MMU is not present   Stefan Hengelein
• [percpu] Convert remaining __get_cpu_var uses in 3.18-rcX   Tejun Heo
• [PATCH 5/6] tty/serial: Add Spreadtrum's serial earlycon   Rob Herring
• [PATCH v2 2/5] dt-bindings: Add a clocks property to the simple-framebuffer binding   Rob Herring
• [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   Rob Herring
• [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   Rob Herring
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   Rob Herring
• [PATCH v2 4/7] of: add vendor prefix for Tronsmart   Rob Herring
• [PATCH v4 4/4] arch: arm: boot: dts: Added correct vendor-prefix with device name to compatible property   Rob Herring
• [PATCH v4 2/4] Documentation: devicetree: bindings: Document deprecated device vendor name to fix related warning   Rob Herring
• [PATCH v3] clocksource: arch_timer: Allow the device tree to specify uninitialized CNTVOFF   Rob Herring
• [PATCH 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Rob Herring
• [PATCH v4 08/10] add Alphascale to vendor-prefixes.txt   Rob Herring
• [PATCH v4 01/10] ARM: add mach-asm9260   Rob Herring
• [PATCH v3 1/2] devicetree: bindings: Add vendor prefix for TBS Technologies   Rob Herring
• [PATCH v4 0/5] simplefb: add clock handling code   Rob Herring
• [RFC V2] arm/arm64:add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction   Rob Herring
• [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code   Rob Herring
• Fixing boot-time hiccups in your display   David Herrmann
• [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes   Sebastian Hesselbarth
• [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes   Sebastian Hesselbarth
• [PATCH] ARM: dts: berlin: Add GPIO leds to Google Chromecast   Sebastian Hesselbarth
• [PATCH 00/12] SDHCI PXA cleanup and clocks   Sebastian Hesselbarth
• [PATCH 01/12] mmc: sdhci-pxav2: Drop unused struct sdhci_pxa   Sebastian Hesselbarth
• [PATCH 02/12] mmc: sdhci-pxav3: Respect MMC_DDR52 timing on uhs signaling   Sebastian Hesselbarth
• [PATCH 03/12] mmc: sdhci-pxav3: Move private driver data to driver source   Sebastian Hesselbarth
• [PATCH 04/12] mmc: sdhci-pxav3: Remove unused clk_enable from sdhci_pxa   Sebastian Hesselbarth
• [PATCH 05/12] mmc: sdhci-pxav3: Remove checks for mandatory host clock   Sebastian Hesselbarth
• [PATCH 06/12] mmc: sdhci-pxav3: Move I/O clock to private data   Sebastian Hesselbarth
• [PATCH 07/12] mmc: sdhci-pxav3: Try to get named I/O clock first   Sebastian Hesselbarth
• [PATCH 08/12] mmc: sdhci-pxav3: Get optional core clock   Sebastian Hesselbarth
• [PATCH 09/12] mmc: sdhci-pxav3: Document clocks and additional clock-names property   Sebastian Hesselbarth
• [PATCH 10/12] ARM: dts: berlin: Add SDHCI controller nodes to BG2/BG2CD   Sebastian Hesselbarth
• [PATCH 11/12] ARM: dts: berlin: Enable WiFi on Google Chromecast   Sebastian Hesselbarth
• [PATCH 12/12] ARM: dts: berlin: Enable eMMC on Sony NSZ-GS7   Sebastian Hesselbarth
• [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes   Sebastian Hesselbarth
• [PATCH] ARM: mvebu: Fix the Aurora L2 cache node with the required cache-unified property   Sebastian Hesselbarth
• [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes   Sebastian Hesselbarth
• [PATCH 3/3] irqchip: dw-apb-ictl: add PM support   Sebastian Hesselbarth
• [PATCH 3/3] irqchip: dw-apb-ictl: add PM support   Sebastian Hesselbarth
• [PATCH RFT 0/8] Marvell PXA168 libphy handling and Berlin Ethernet   Sebastian Hesselbarth
• [PATCH RFT 1/8] phy: marvell: Add support for 88E3016 FastEthernet PHY   Sebastian Hesselbarth
• [PATCH RFT 2/8] net: pxa168_eth: Provide phy_interface mode on platform_data   Sebastian Hesselbarth
• [PATCH RFT 3/8] net: pxa168_eth: Prepare proper libphy handling   Sebastian Hesselbarth
• [PATCH RFT 4/8] net: pxa168_eth: Remove HW auto-negotiaion   Sebastian Hesselbarth
• [PATCH RFT 5/8] net: pxa168_eth: Remove in-driver PHY mangling   Sebastian Hesselbarth
• [PATCH RFT 6/8] ARM: berlin: Add BG2 ethernet DT nodes   Sebastian Hesselbarth
• [PATCH RFT 7/8] ARM: berlin: Add BG2CD ethernet DT nodes   Sebastian Hesselbarth
• [PATCH RFT 8/8] ARM: berlin: Enable ethernet on Sony NSZ-GS7   Sebastian Hesselbarth
• [PATCH RFT 0/8] Marvell PXA168 libphy handling and Berlin Ethernet   Sebastian Hesselbarth
• [PATCH RFT 0/8] Marvell PXA168 libphy handling and Berlin Ethernet   Sebastian Hesselbarth
• [PATCH RFT 0/8] Marvell PXA168 libphy handling and Berlin Ethernet   Sebastian Hesselbarth
• [PATCH 0/5] Berlin BG2 AHCI and SATA PHY   Sebastian Hesselbarth
• [PATCH 1/5] phy: berlin-sata: Move PHY_BASE into private data struct   Sebastian Hesselbarth
• [PATCH 2/5] phy: berlin-sata: Add support for BG2 SATA PHY   Sebastian Hesselbarth
• [PATCH 3/5] phy: berlin-sata: Document BG2 compatible   Sebastian Hesselbarth
• [PATCH 4/5] ARM: berlin: Add AHCI and SATA PHY nodes to BG2   Sebastian Hesselbarth
• [PATCH 5/5] ARM: berlin: Enable SATA on Sony NSZ-GS7   Sebastian Hesselbarth
• [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes   Sebastian Hesselbarth
• [GIT PULL] ARM: berlin: Driver changes for v3.18   Sebastian Hesselbarth
• [PATCH RFT 0/8] Marvell PXA168 libphy handling and Berlin Ethernet   Sebastian Hesselbarth
• [GIT PULL] ARM: berlin: Driver changes for v3.18   Sebastian Hesselbarth
• [PATCH] ARM: dts: berlin: Add GPIO leds to Google Chromecast   Sebastian Hesselbarth
• [PATCH] arm: dts: add initial support for TBS2910 Matrix ARM mini PC   Sebastian Hesselbarth
• [PATCH 0/9] Marvell PXA168 libphy handling and Berlin Ethernet   Sebastian Hesselbarth
• [PATCH 1/9] phy: marvell: Add support for 88E3016 FastEthernet PHY   Sebastian Hesselbarth
• [PATCH 2/9] net: pxa168_eth: Provide phy_interface mode on platform_data   Sebastian Hesselbarth
• [PATCH 3/9] net: pxa168_eth: Prepare proper libphy handling   Sebastian Hesselbarth
• [PATCH 4/9] net: pxa168_eth: Remove HW auto-negotiaion   Sebastian Hesselbarth
• [PATCH 5/9] net: pxa168_eth: Remove in-driver PHY mangling   Sebastian Hesselbarth
• [PATCH 6/9] ARM: berlin: Add BG2 ethernet DT nodes   Sebastian Hesselbarth
• [PATCH 7/9] ARM: berlin: Add BG2CD ethernet DT nodes   Sebastian Hesselbarth
• [PATCH 8/9] ARM: berlin: Add phy-connection-type to BG2Q PHY   Sebastian Hesselbarth
• [PATCH 9/9] ARM: berlin: Enable ethernet on Sony NSZ-GS7   Sebastian Hesselbarth
• [PATCH v2 0/5] Berlin BG2 AHCI and SATA PHY   Sebastian Hesselbarth
• [PATCH v2 1/5] phy: berlin-sata: Move PHY_BASE into private data struct   Sebastian Hesselbarth
• [PATCH v2 2/5] phy: berlin-sata: Add support for BG2 SATA PHY   Sebastian Hesselbarth
• [PATCH v2 3/5] phy: berlin-sata: Document BG2 compatible   Sebastian Hesselbarth
• [PATCH v2 4/5] ARM: berlin: Add AHCI and SATA PHY nodes to BG2   Sebastian Hesselbarth
• [PATCH v2 5/5] ARM: berlin: Enable SATA on Sony NSZ-GS7   Sebastian Hesselbarth
• [PATCH RESEND 00/12] SDHCI PXA cleanup and clocks   Sebastian Hesselbarth
• [PATCH RESEND 01/12] mmc: sdhci-pxav2: Drop unused struct sdhci_pxa   Sebastian Hesselbarth
• [PATCH RESEND 02/12] mmc: sdhci-pxav3: Respect MMC_DDR52 timing on uhs signaling   Sebastian Hesselbarth
• [PATCH RESEND 03/12] mmc: sdhci-pxav3: Move private driver data to driver source   Sebastian Hesselbarth
• [PATCH RESEND 04/12] mmc: sdhci-pxav3: Remove unused clk_enable from sdhci_pxa   Sebastian Hesselbarth
• [PATCH RESEND 05/12] mmc: sdhci-pxav3: Remove checks for mandatory host clock   Sebastian Hesselbarth
• [PATCH RESEND 06/12] mmc: sdhci-pxav3: Move I/O clock to private data   Sebastian Hesselbarth
• [PATCH RESEND 07/12] mmc: sdhci-pxav3: Try to get named I/O clock first   Sebastian Hesselbarth
• [PATCH RESEND 08/12] mmc: sdhci-pxav3: Get optional core clock   Sebastian Hesselbarth
• [PATCH RESEND 09/12] mmc: sdhci-pxav3: Document clocks and additional clock-names property   Sebastian Hesselbarth
• [PATCH RESEND 10/12] ARM: dts: berlin: Add SDHCI controller nodes to BG2/BG2CD   Sebastian Hesselbarth
• [PATCH RESEND 11/12] ARM: dts: berlin: Enable WiFi on Google Chromecast   Sebastian Hesselbarth
• [PATCH RESEND 12/12] ARM: dts: berlin: Enable eMMC on Sony NSZ-GS7   Sebastian Hesselbarth
• [PATCH v2 1/5] phy: berlin-sata: Move PHY_BASE into private data struct   Sebastian Hesselbarth
• [PATCH 8/9] ARM: berlin: Add phy-connection-type to BG2Q PHY   Sebastian Hesselbarth
• [PATCH] arm: dts: add initial support for TBS2910 Matrix ARM mini PC   Sebastian Hesselbarth
• [PATCH] ARM: berlin: sort Kconfig options   Sebastian Hesselbarth
• [PATCH] arm: dts: add initial support for TBS2910 Matrix ARM mini PC   Sebastian Hesselbarth
• [PATCH v2 0/9] Marvell PXA168 libphy handling and Berlin Ethernet   Sebastian Hesselbarth
• [PATCH v2 1/9] phy: marvell: Add support for 88E3016 FastEthernet PHY   Sebastian Hesselbarth
• [PATCH v2 2/9] net: pxa168_eth: Provide phy_interface mode on platform_data   Sebastian Hesselbarth
• [PATCH v2 3/9] net: pxa168_eth: Prepare proper libphy handling   Sebastian Hesselbarth
• [PATCH v2 4/9] net: pxa168_eth: Remove HW auto-negotiaion   Sebastian Hesselbarth
• [PATCH v2 5/9] net: pxa168_eth: Remove in-driver PHY mangling   Sebastian Hesselbarth
• [PATCH v2 6/9] ARM: berlin: Add BG2 ethernet DT nodes   Sebastian Hesselbarth
• [PATCH v2 7/9] ARM: berlin: Add BG2CD ethernet DT nodes   Sebastian Hesselbarth
• [PATCH v2 8/9] ARM: berlin: Add phy-connection-type to BG2Q Ethernet   Sebastian Hesselbarth
• [PATCH v2 9/9] ARM: berlin: Enable ethernet on Sony NSZ-GS7   Sebastian Hesselbarth
• [PATCH v2 1/5] phy: berlin-sata: Move PHY_BASE into private data struct   Sebastian Hesselbarth
• [PATCH v2 1/5] phy: berlin-sata: Move PHY_BASE into private data struct   Sebastian Hesselbarth
• [PATCH] fixup! net: pxa168_eth: Provide phy_interface mode on platform_data   Sebastian Hesselbarth
• [PATCH v2] arm: dts: add initial support for TBS2910 Matrix ARM mini PC   Sebastian Hesselbarth
• [PATCH RESEND 06/12] mmc: sdhci-pxav3: Move I/O clock to private data   Sebastian Hesselbarth
• [PATCH v2 1/5] phy: berlin-sata: Move PHY_BASE into private data struct   Sebastian Hesselbarth
• [PATCH] fixup! net: pxa168_eth: Provide phy_interface mode on platform_data   Sebastian Hesselbarth
• [PATCH v2 6/9] ARM: berlin: Add BG2 ethernet DT nodes   Sebastian Hesselbarth
• [PATCH RESEND 10/12] ARM: dts: berlin: Add SDHCI controller nodes to BG2/BG2CD   Sebastian Hesselbarth
• [PATCH v3 0/5] Berlin BG2 AHCI and SATA PHY   Sebastian Hesselbarth
• [PATCH v3 1/5] phy: berlin-sata: Move PHY_BASE into private data struct   Sebastian Hesselbarth
• [PATCH v3 2/5] phy: berlin-sata: Add support for BG2 SATA PHY   Sebastian Hesselbarth
• [PATCH v3 3/5] phy: berlin-sata: Document BG2 compatible   Sebastian Hesselbarth
• [PATCH v3 4/5] ARM: berlin: Add AHCI and SATA PHY nodes to BG2   Sebastian Hesselbarth
• [PATCH v3 5/5] ARM: berlin: Enable SATA on Sony NSZ-GS7   Sebastian Hesselbarth
• [PATCH v2 0/3] ARM: rk3288 : Add PM Domain support   Kevin Hilman
• [PATCH] serial/core: Initialize the console pm state   Kevin Hilman
• [PATCH v2 0/3] ARM: rk3288 : Add PM Domain support   Kevin Hilman
• [PATCH v2 0/3] ARM: rk3288 : Add PM Domain support   Kevin Hilman
• [PATCH v2 0/4] PM / Domains: Fix race conditions during boot   Kevin Hilman
• [PATCH v2 0/4] PM / Domains: Fix race conditions during boot   Kevin Hilman
• [PATCH v9 0/2] Adds PMU and S2R support for exynos5420   Kevin Hilman
• [PATCH v3] ARM: dts: Add initial DTS file for Sony Xperia Z1 phone   Kevin Hilman
• [PATCH] ARM: dts: Disable smc91x on n900 until bootloader dependency is removed   Kevin Hilman
• [PATCH v9 0/2] Adds PMU and S2R support for exynos5420   Kevin Hilman
• [PATCH v9 0/2] Adds PMU and S2R support for exynos5420   Kevin Hilman
• [PATCH 1/1] ARM: exynos_defconfig: re-enable USB gadget and max77802 options   Kevin Hilman
• [PATCH v9 0/2] Adds PMU and S2R support for exynos5420   Kevin Hilman
• [PATCH 1/1] ARM: exynos_defconfig: re-enable USB gadget and max77802 options   Kevin Hilman
• [PATCH v1 2/4] ARM: keystone: pm: switch to use generic pm domains   Kevin Hilman
• [PATCH v1 2/4] ARM: keystone: pm: switch to use generic pm domains   Kevin Hilman
• [PATCH] tty: serial: 8250_core: restore the LCR register in set_sleep   Kevin Hilman
• [PATCH] spi/atmel: add support for runtime PM   Kevin Hilman
• [PATCH] spi/atmel: add support for runtime PM   Kevin Hilman
• [PATCH v1] tty: serial: 8250_core: restore the LCR register in set_sleep   Kevin Hilman
• [PATCH] spi/atmel: add support for runtime PM   Kevin Hilman
• [PATCH 2/3] i2c/at91: add support for system PM   Kevin Hilman
• [PATCH 3/3] i2c/at91: adopt pinctrl support   Kevin Hilman
• [RESEND/PATCH] i2c: pxa: Use suspend() and resume() instead of the _noirq hooks   Kevin Hilman
• [PATCH v4 1/3] power-domain: add power domain drivers for Rockchip platform   Kevin Hilman
• [PATCH v4 0/3] ARM: rk3288 : Add PM Domain support   Kevin Hilman
• [PATCH v5 0/6] add basic rk3288 smp support   Kevin Hilman
• [PATCH 1/3] drivers: cpuidle: add status property to ARM idle states   Kevin Hilman
• [PATCH] spi/atmel: improve the system suspend/resume functions implementation   Kevin Hilman
• [PATCH v2 2/3] ARM: keystone: pm: switch to use generic pm domains   Kevin Hilman
• [RESEND/PATCH] i2c: pxa: Use suspend() and resume() instead of the _noirq hooks   Kevin Hilman
• [PATCH v3 0/9] PM / Domains: Fix race conditions during boot   Kevin Hilman
• [PATCH] ARM: OMAP4+: PM: Program CPU logic power state   Kevin Hilman
• [PATCH v3 4/6] ARM: rockchip: add suspend and resume for RK3288   Kevin Hilman
• [PATCH] pinctrl: at91: use own header   Kevin Hilman
• [RFC 1/2] PM / Domains: Power on domain early during system resume   Kevin Hilman
• [PATCH v6 4/7] ARM: rockchip: add suspend and resume for RK3288   Kevin Hilman
• [PATCH v6 4/7] ARM: rockchip: add suspend and resume for RK3288   Kevin Hilman
• [PATCH v6 0/7] This is the 1st version of suspend for RK3288.   Kevin Hilman
• [PATCH 1/4] PM / Domains: Remove reference counting for the generic_pm_domain_data   Kevin Hilman
• [PATCH 4/4] PM / Domains: Let the ->attach_dev() callback return an error code   Kevin Hilman
• [PATCH 2/4] PM / Domains: Don't allow an existing generic PM domain data   Kevin Hilman
• [PATCH 3/4] PM / Domains: Improve error handling while adding/removing devices   Kevin Hilman
• [PATCH 3/4] PM / Domains: Improve error handling while adding/removing devices   Kevin Hilman
• [PATCH v2] MAINTAINERS: drop list entry for davinci   Kevin Hilman
• [PATCH] PM / Domains: Change prototype for the ->attach_dev() callback   Kevin Hilman
• [PATCH v3 0/9] PM / Domains: Fix race conditions during boot   Kevin Hilman
• [PATCH v3 4/9] drivercore / platform: Keep PM domain powered during ->probe()   Kevin Hilman
• exynos5420/arndale-octa: imprecise external aborts on exynos_defconfig   Kevin Hilman
• [PATCH] ARM: exynos_defconfig: disable CONFIG_EXYNOS5420_MCPM; not stable   Kevin Hilman
• [PATCH v6 0/7] ARM: kprobes: enable OPTPROBES for ARM 32.   Masami Hiramatsu
• [PATCH v7 1/2] kprobes: copy ainsn after alloc aggr kprobe   Masami Hiramatsu
• imx6: ipu: wrong pixel clock   Jeroen Hofstee
• [PATCH v2 08/47] kernel: Move pm_power_off to common code   James Hogan
• [PATCH v8 1/7] qcom: spm: Add Subsystem Power Manager driver   Sudeep Holla
• [PATCH v8 1/7] qcom: spm: Add Subsystem Power Manager driver   Sudeep Holla
• [PATCH] ARM/ARM64: arch-timer: fix arch_timer_probed logic   Sudeep Holla
• [PATCH v4] ARM: perf: save/restore pmu registers in pm notifier   Sudeep Holla
• [PATCH v2 3/4] PM / Domains: Expect PM domains being powered at initialization   Simon Horman
• [PATCH] ARM: shmobile: r7s72100: Remove r7s72100-genmai.dtb for ARCH_SHMOBILE_LEGACY   Simon Horman
• [PATCH 3/4] ARM: shmobile: r8a7790: Add MMP clock to device tree   Simon Horman
• [PATCH 1/4] ARM: shmobile: r8a7790: Add RGX clock to device tree   Simon Horman
• [PATCH] arch: arm: mach-shmobile: Remove ARCH_HAS_OPP completely   Simon Horman
• [PATCH 0/4] ARM: shmobile: Add clock to DT   Simon Horman
• [PATCH 1/4] ARM: shmobile: r8a7790: Add RGX clock to device tree   Simon Horman
• [PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board   Simon Horman
• [PATCH 0/2] ARM: shmobile: r8a7791: Correct number of CPU cores   Simon Horman
• [PATCH 1/2] ARM: shmobile: Separate APMU resource data into CPU dependant part   Simon Horman
• [PATCH 2/2] ARM: shmobile: r8a7791: Correct number of CPU cores   Simon Horman
• [PATCH 1/2] ARM: shmobile: r8a73a4: Add SoC-specific CMT compatible property   Simon Horman
• [PATCH 2/2] ARM: shmobile: r8a7778: Add SoC-specific TMU compatible property   Simon Horman
• [PATCH/RFC] ARM: shmobile: sh7372: Keep D4 pm domain powered   Simon Horman
• [PATCH v3 01/11] ARM: shmobile: r8a7740: Add missing A3SP pm domain devices   Simon Horman
• [PATCH v3 02/11] ARM: shmobile: r8a7740: Add missing A4S pm domain devices   Simon Horman
• [PATCH v3 04/11] ARM: shmobile: armadillo800eva legacy: Add missing A4S pm domain devices   Simon Horman
• [PATCH v3 05/11] ARM: shmobile: r8a7740: Add A3RV pm domain support   Simon Horman
• [PATCH v3 04/11] ARM: shmobile: armadillo800eva legacy: Add missing A4S pm domain devices   Simon Horman
• [PATCH v3 06/11] ARM: shmobile: r8a7740: Add A3SG pm domain support   Simon Horman
• [PATCH v3 07/11] ARM: shmobile: r8a7740/armadillo legacy: Add A4MP pm domain support   Simon Horman
• [PATCH v3 07/11] ARM: shmobile: r8a7740/armadillo legacy: Add A4MP pm domain support   Simon Horman
• [PATCH/RFC] ARM: shmobile: sh7372: Keep D4 pm domain powered   Simon Horman
• [PATCH/RFC] ARM: shmobile: sh7372: Keep D4 pm domain powered   Simon Horman
• [PATCH/RFC] ARM: shmobile: sh7372: Keep D4 pm domain powered   Simon Horman
• [GIT PULL] Renesas ARM Based SoC Clocks Updates for v3.19   Simon Horman
• [PATCH] ARM: shmobile: r8a7740 legacy: Add missing INTCA clock for irqpin module   Simon Horman
• [GIT PULL] Renesas ARM Based SoC Kconfig Cleanups for v3.19   Simon Horman
• [PATCH] ARM: shmobile: Remove ARCH_HAS_OPP completely   Simon Horman
• [PATCH 01/19] ARM: dts: Sort SHMOBILE dtbs alphabetically   Simon Horman
• [PATCH 02/19] ARM: shmobile: r8a73a4: Remove spurious dma-multiplexer base addresses   Simon Horman
• [PATCH 03/19] ARM: shmobile: r7s72100: sort dtsi file by address   Simon Horman
• [PATCH 04/19] ARM: shmobile: kzm9d: sort dts file by address   Simon Horman
• [PATCH 05/19] ARM: shmobile: r8a73a4: sort dtsi file by address   Simon Horman
• [PATCH 06/19] ARM: shmobile: r7s72100: Remove r7s72100-genmai.dtb for ARCH_SHMOBILE_LEGACY   Simon Horman
• [PATCH 07/19] ARM: shmobile: emev2 dtsi: Use generic names for device nodes   Simon Horman
• [PATCH 08/19] ARM: shmobile: emev2 dtsi: Add uart* labels for easier referencing   Simon Horman
• [PATCH 09/19] ARM: shmobile: genmai dts: Add chosen/stdout-path   Simon Horman
• [PATCH 10/19] ARM: shmobile: ape6evm-reference dts: Add chosen/stdout-path   Simon Horman
• [PATCH 11/19] ARM: shmobile: armadillo800eva dts: Add chosen/stdout-path   Simon Horman
• [GIT PULL] Renesas ARM Based SoC DT Cleanups for v3.19   Simon Horman
• [PATCH 12/19] ARM: shmobile: bockw-reference dts: Add chosen/stdout-path   Simon Horman
• [PATCH 13/19] ARM: shmobile: marzen dts: Add chosen/stdout-path   Simon Horman
• [PATCH 14/19] ARM: shmobile: lager dts: Add chosen/stdout-path   Simon Horman
• [PATCH 15/19] ARM: shmobile: henninger dts: Add chosen/stdout-path   Simon Horman
• [PATCH 16/19] ARM: shmobile: koelsch dts: Add chosen/stdout-path   Simon Horman
• [PATCH 17/19] ARM: shmobile: alt dts: Add chosen/stdout-path   Simon Horman
• [PATCH 18/19] ARM: shmobile: kzm9g-reference dts: Add chosen/stdout-path   Simon Horman
• [PATCH 19/19] ARM: shmobile: kzm9d dts: Add chosen/stdout-path   Simon Horman
• [GIT PULL] Renesas ARM Based SoC Boards Cleanups for v3.19   Simon Horman
• [PATCH] ARM: shmobile: armadillo800eva: Sort includes   Simon Horman
• [PATCH 1/4] ARM: shmobile: r8a73a4: Add CMT1 node   Simon Horman
• [PATCH 2/4] ARM: shmobile: r8a73a4: Rename cmt registration helper   Simon Horman
• [GIT PULL] Renesas ARM Based SoC r8a73a4 DT Timers Updates for v3.19   Simon Horman
• [PATCH 3/4] ARM: shmobile: ape6evm-reference: Initialise CMT1 device using DT   Simon Horman
• [PATCH 4/4] ARM: shmobile: r8a73a4: Remove empty r8a73a4_add_dt_devices   Simon Horman
• [PATCH 1/2] ARM: shmobile: r8a7778: Remove wrapper r8a7778_init_delay()   Simon Horman
• [GIT PULL] Renesas ARM Based SoC Soc Cleanups for v3.19   Simon Horman
• [PATCH 2/2] ARM: shmobile: sh73a0: Remove wrapper sh73a0_init_delay()   Simon Horman
• [GIT PULL] Renesas ARM Based SoC Cleanup for v3.19   Simon Horman
• [PATCH] ARM: shmobile: Remove FSF address from copyright headers   Simon Horman
• [PATCH 1/3] clocksource: sh_tmu: Document R-Mobile r8a7740 binding   Simon Horman
• [GIT PULL] Renesas ARM Based SoC DT Clocksource Updates for v3.19   Simon Horman
• [PATCH 2/3] clocksource: sh_tmu: Document r8a7778 binding   Simon Horman
• [PATCH 3/3] clocksource: sh_mtu2: Drop incorrect SoC family name   Simon Horman
• [PATCH] ARM: shmobile: ape6evm: Enable PM Runtime in defconfig   Simon Horman
• [PATCH/RFC] ARM: shmobile: koelsch: Add MSIOF1 support to device tree   Simon Horman
• [PATCH/RFC] ARM: shmobile: koelsch: Fix SPI mode of SPI-Flash into mode3   Simon Horman
• [PATCH] ARM: shmobile: koelsch: Fix flash partition label and size in device tree   Simon Horman
• [PATCH/RFC] ARM: shmobile: lager: Add I2C2 clock frequency to device tree   Simon Horman
• [PATCH/RFC] ARM: shmobile: lager: Fix SPI mode of SPI-Flash into mode3   Simon Horman
• [PATCH/RFC] ARM: shmobile: lager: Fix node name of GPIO keys   Simon Horman
• [PATCH/RFC] ARM: shmobile: r8a7790: Add MMCIF clock rate to device tree   Simon Horman
• [PATCH/RFC] ARM: shmobile: r8a7790: Add SDHI clock rate to device tree   Simon Horman
• [PATCH/RFC] ARM: shmobile: r8a7791: Add SDHI clock rate to device tree   Simon Horman
• [PATCH 0/2] ARM: shmobile: r8a7790: Fix SD3CKCR address   Simon Horman
• [PATCH 1/2] ARM: shmobile: r8a7790: Fix SD3CKCR address   Simon Horman
• [PATCH 2/2] ARM: shmobile: r8a7790: Fix SD3CKCR address to device tree   Simon Horman
• [PATCH 0/3] ARM: shmobile: r8a7794: Add VIN, SGX, MMP and VSP1 to device tree   Simon Horman
• [PATCH 1/3] ARM: shmobile: r8a7794: Add SGX clock to device tree   Simon Horman
• [PATCH 2/3] ARM: shmobile: r8a7794: Add VIN clock to device tree   Simon Horman
• [PATCH 3/3] ARM: shmobile: r8a7794: Add MMP and VSP1 clocks to device tree   Simon Horman
• [PATCH/RFC] ARM: shmobile: r8a7790: Add SDHI clock rate to device tree   Simon Horman
• [PATCH/RFC] ARM: shmobile: lager: Add I2C2 clock frequency to device tree   Simon Horman
• [PATCH 3/8] ARM: shmobile: r8a73a4: Add SCIF nodes   Simon Horman
• [PATCH v2 1/4] rtc: omap: Introduce rtc_omap_dev structure to include per device data   Johan Hovold
• [PATCH v2 2/4] rtc: omap: Adopt driver to support probe deferral   Johan Hovold
• [PATCH v2 4/4] rtc: omap: Support regulator supply for RTC   Johan Hovold
• [PATCH 00/12] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH 01/12] rtc: omap: fix clock-source configuration   Johan Hovold
• [PATCH 02/12] rtc: omap: fix missing wakealarm attribute   Johan Hovold
• [PATCH 03/12] rtc: omap: fix class-device registration   Johan Hovold
• [PATCH 04/12] rtc: omap: remove unused register-base define   Johan Hovold
• [PATCH 05/12] rtc: omap: remove redundant debug message   Johan Hovold
• [PATCH 06/12] rtc: omap: use dev_info and dev_dbg   Johan Hovold
• [PATCH 07/12] rtc: omap: silence bogus power-up reset message at probe   Johan Hovold
• [PATCH 08/12] rtc: omap: restore irq state after reading TC registers   Johan Hovold
• [PATCH 09/12] rtc: omap: add support for pmic_power_en   Johan Hovold
• [PATCH 10/12] rtc: omap: enable wake-up from power off   Johan Hovold
• [PATCH 11/12] ARM: dts: am33xx: update rtc node compatible property   Johan Hovold
• [PATCH 12/12] ARM: dts: am335x-bone-common: enable power off and rtc wake up   Johan Hovold
• [PATCH 00/12] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH 03/12] rtc: omap: fix class-device registration   Johan Hovold
• [PATCH 08/12] rtc: omap: restore irq state after reading TC registers   Johan Hovold
• [PATCH 07/12] rtc: omap: silence bogus power-up reset message at probe   Johan Hovold
• [PATCH 09/12] rtc: omap: add support for pmic_power_en   Johan Hovold
• [PATCH 12/12] ARM: dts: am335x-bone-common: enable power off and rtc wake up   Johan Hovold
• [PATCH 07/12] rtc: omap: silence bogus power-up reset message at probe   Johan Hovold
• [PATCH 00/12] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH v2 01/20] rtc: omap: fix clock-source configuration   Johan Hovold
• [PATCH v2 02/20] rtc: omap: fix missing wakealarm attribute   Johan Hovold
• [PATCH v2 03/20] rtc: omap: fix interrupt disable at probe   Johan Hovold
• [PATCH v2 04/20] rtc: omap: clean up probe error handling   Johan Hovold
• [PATCH v2 05/20] rtc: omap: fix class-device registration   Johan Hovold
• [PATCH v2 06/20] rtc: omap: remove unused register-base define   Johan Hovold
• [PATCH v2 07/20] rtc: omap: use dev_info   Johan Hovold
• [PATCH v2 08/20] rtc: omap: make platform-device id table const   Johan Hovold
• [PATCH v2 09/20] rtc: omap: add device abstraction   Johan Hovold
• [PATCH v2 10/20] rtc: omap: remove DRIVER_NAME macro   Johan Hovold
• [PATCH v2 11/20] rtc: omap: add structured device-type info   Johan Hovold
• [PATCH v2 12/20] rtc: omap: silence bogus power-up reset message at probe   Johan Hovold
• [PATCH v2 13/20] rtc: omap: add helper to read raw bcd time   Johan Hovold
• [PATCH v2 14/20] rtc: omap: add helper to read 32-bit registers   Johan Hovold
• [PATCH v2 15/20] rtc: omap: add support for pmic_power_en   Johan Hovold
• [PATCH v2 16/20] rtc: omap: enable wake-up from power off   Johan Hovold
• [PATCH v2 17/20] rtc: omap: fix minor coding style issues   Johan Hovold
• [PATCH v2 18/20] rtc: omap: add copyright entry   Johan Hovold
• [PATCH v2 19/20] ARM: dts: am33xx: update rtc-node compatible property   Johan Hovold
• [PATCH v2 20/20] ARM: dts: am335x-boneblack: enable power off and rtc wake up   Johan Hovold
• [PATCH 09/12] rtc: omap: add support for pmic_power_en   Johan Hovold
• [PATCH 00/12] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH 08/12] rtc: omap: restore irq state after reading TC registers   Johan Hovold
• [PATCH 00/12] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH 00/12] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH V3 1/3] rtc: omap: use module_platform_driver   Johan Hovold
• [PATCH V3 3/3] rtc: omap: Support regulator supply for RTC   Johan Hovold
• [PATCH 00/12] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH] ARM: remove redundant irq disable at halt and restart   Johan Hovold
• [PATCH] ARM: remove redundant irq disable at halt and restart   Johan Hovold
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH] ARM: remove redundant irq disable at halt and restart   Johan Hovold
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH v3] rtc: omap: add support for pmic_power_en   Johan Hovold
• [PATCH v1 01/10] of: Rename "poweroff-source" property to "system-power-controller"   Johan Hovold
• [PATCH v2 06/10] mfd: tps65910: Use the standard DT property system-power-controller   Johan Hovold
• [PATCH v3] rtc: omap: add support for pmic_power_en   Johan Hovold
• [PATCH v1 01/10] of: Rename "poweroff-source" property to "system-power-controller"   Johan Hovold
• [PATCH v1 01/10] of: Rename "poweroff-source" property to "system-power-controller"   Johan Hovold
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH v3] rtc: omap: add support for pmic_power_en   Johan Hovold
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH v3] rtc: omap: add support for pmic_power_en   Johan Hovold
• [PATCH v3] rtc: omap: add support for pmic_power_en   Johan Hovold
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH v4] rtc: omap: add support for pmic_power_en   Johan Hovold
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Johan Hovold
• [PATCH] ARM: kexec: Fix validating CPU hotplug support   HuKeping
• [PATCH v2] ARM: kexec: Fix validating CPU hotplug support   HuKeping
• [PATCH 0/3] tty: serial: Add mediatek MT8127 and MT8135 UART support   Eddie Huang
• [PATCH 1/3] tty: serial: Fix mediatek UART driver setting baudrate issue   Eddie Huang
• [PATCH 2/3] ARM: mediatek: add UART dts for mt8127 and mt8135   Eddie Huang
• [PATCH 3/3] DTS: serial: Add bindings document for the Mediatek UARTs   Eddie Huang
• [PATCH v12 1/6] KVM: Add architecture-defined TLB flush support   Cornelia Huck
• [PATCH v12 2/6] KVM: Add generic support for dirty page logging   Cornelia Huck
• [RFC 4/7] soc: qcom: Add Shared Memory Manager driver   Jeffrey Hugo
• [RFC 3/7] mfd: devicetree: bindings: Add Qualcomm SMD based RPM DT binding   Jeffrey Hugo
• [PATCH v4 2/2] iommu/arm-smmu: add support for iova_to_phys through ATS1PR   Mitchel Humpherys
• [PATCH v4 1/2] iopoll: Introduce memory-mapped IO polling macros   Mitchel Humpherys
• [PATCH v4 1/2] iopoll: Introduce memory-mapped IO polling macros   Mitchel Humpherys
• [PATCH v5 0/2] iommu/arm-smmu: hard iova_to_phys   Mitchel Humpherys
• [PATCH v5 1/2] iopoll: Introduce memory-mapped IO polling macros   Mitchel Humpherys
• [PATCH v5 2/2] iommu/arm-smmu: add support for iova_to_phys through ATS1PR   Mitchel Humpherys
• [PATCH v4 1/2] iopoll: Introduce memory-mapped IO polling macros   Mitchel Humpherys
• [PATCH v4 1/2] iopoll: Introduce memory-mapped IO polling macros   Mitchel Humpherys
• [PATCH v6 0/2] iommu/arm-smmu: hard iova_to_phys   Mitchel Humpherys
• [PATCH v6 1/2] iopoll: Introduce memory-mapped IO polling macros   Mitchel Humpherys
• [PATCH v6 2/2] iommu/arm-smmu: add support for iova_to_phys through ATS1PR   Mitchel Humpherys
• [PATCH v6 1/2] iopoll: Introduce memory-mapped IO polling macros   Mitchel Humpherys
• [PATCH v7 0/2] iommu/arm-smmu: hard iova_to_phys   Mitchel Humpherys
• [PATCH v7 1/2] iopoll: Introduce memory-mapped IO polling macros   Mitchel Humpherys
• [PATCH v7 2/2] iommu/arm-smmu: add support for iova_to_phys through ATS1PR   Mitchel Humpherys
• [PATCH v7 1/2] iopoll: Introduce memory-mapped IO polling macros   Mitchel Humpherys
• [PATCH 00/13 v10] omap 8250 based UART + DMA   Peter Hurley
• [PATCH] tty: serial: 8250_core: Do not call set_sleep for console port   Peter Hurley
• [PATCH] serial: of-serial: fix up PM ops on no_console_suspend   Peter Hurley
• [PATCH] serial: of-serial: fix up PM ops on no_console_suspend   Peter Hurley
• RCU bug with v3.17-rc3 ?   Peter Hurley
• RCU bug with v3.17-rc3 ?   Peter Hurley
• [PATCHv3] serial: of-serial: fix up PM ops on no_console_suspend and port type   Peter Hurley
• RCU bug with v3.17-rc3 ?   Peter Hurley
• [PATCHv4] serial: of-serial: fix up PM ops on no_console_suspend and port type   Peter Hurley
• [PATCH] ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854   Peter Hurley
• [PATCH] ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854   Peter Hurley
• [PATCH] tty: serial: 8250_core: restore the LCR register in set_sleep   Peter Hurley
• [PATCH v1] tty: serial: 8250_core: restore the LCR register in set_sleep   Peter Hurley
• [PATCH] tty: serial: msm: Fix lock init issue with earlycon   Peter Hurley
• [PATCH] tty: serial: msm: Fix lock init issue with earlycon   Peter Hurley
• [PATCH 1/2] tty: serial: msm: Fix sysrq spinlock recursion on non-DM   Peter Hurley
• [PATCH v2 1/5] m25p80,spi-nor: Fix module aliases for m25p80   Ben Hutchings
• [PATCH v2 1/5] phy: berlin-sata: Move PHY_BASE into private data struct   Kishon Vijay Abraham I
• [PATCH v3 2/8] phy: miphy28lp: Add MiPHY28lp header file for DT x Driver defines   Kishon Vijay Abraham I
• [PATCH v3 6/8] phy: miphy28lp: Add SSC support for PCIE   Kishon Vijay Abraham I
• [PATCH v3 2/8] phy: miphy28lp: Add MiPHY28lp header file for DT x Driver defines   Kishon Vijay Abraham I
• [PATCH v2 1/5] phy: berlin-sata: Move PHY_BASE into private data struct   Kishon Vijay Abraham I
• [PATCH v2 1/5] phy: berlin-sata: Move PHY_BASE into private data struct   Kishon Vijay Abraham I
• [PATCH v10 0/4] APM X-Gene PCIe host controller   Tanmay Inamdar
• [Patch v3] spi: qup: Fix incorrect block transfers   Ivan T. Ivanov
• [PATCH v8 0/7] QCOM 8974 and 8084 cpuidle driver   Ivan T. Ivanov
• [PATCH v8 0/7] QCOM 8974 and 8084 cpuidle driver   Ivan T. Ivanov
• [PATCH v8 0/7] QCOM 8974 and 8084 cpuidle driver   Ivan T. Ivanov
• [PATCH v9 0/9] cpuidle driver for QCOM SoCs: 8064, 8074, 8084   Ivan T. Ivanov
• [PATCH v7 4/7] qcom: pm: Add cpu low power mode functions   Lina Iyer
• [PATCH 1/7] qcom: spm: Add Subsystem Power Manager driver   Lina Iyer
• [PATCH 2/7] arm: dts: qcom: Add power-controller device node for 8974 Krait CPUs   Lina Iyer
• [PATCH 3/7] arm: dts: qcom: Add power-controller device node for 8084 Krait CPUs   Lina Iyer
• [PATCH 4/7] qcom: pm: Add cpu low power mode functions   Lina Iyer
• [PATCH 5/7] qcom: cpuidle: Add cpuidle driver for QCOM cpus   Lina Iyer
• [PATCH 6/7] arm: dts: qcom: Add idle states device nodes for 8974   Lina Iyer
• [PATCH 7/7] arm: dts: qcom: Add idle states device nodes for 8084   Lina Iyer
• [PATCH v8 0/7] QCOM 8974 and 8084 cpuidle driver   Lina Iyer
• [PATCH v8 1/7] qcom: spm: Add Subsystem Power Manager driver   Lina Iyer
• [PATCH v8 2/7] arm: dts: qcom: Add power-controller device node for 8974 Krait CPUs   Lina Iyer
• [PATCH v8 3/7] arm: dts: qcom: Add power-controller device node for 8084 Krait CPUs   Lina Iyer
• [PATCH v8 4/7] qcom: pm: Add cpu low power mode functions   Lina Iyer
• [PATCH v8 5/7] qcom: cpuidle: Add cpuidle driver for QCOM cpus   Lina Iyer
• [PATCH v8 6/7] arm: dts: qcom: Add idle states device nodes for 8974   Lina Iyer
• [PATCH v8 7/7] arm: dts: qcom: Add idle states device nodes for 8084   Lina Iyer
• [PATCH v8 4/7] qcom: pm: Add cpu low power mode functions   Lina Iyer
• [PATCH v8 2/7] arm: dts: qcom: Add power-controller device node for 8974 Krait CPUs   Lina Iyer
• [PATCH v8 1/7] qcom: spm: Add Subsystem Power Manager driver   Lina Iyer
• [PATCH v8 1/7] qcom: spm: Add Subsystem Power Manager driver   Lina Iyer
• [PATCH v8 1/7] qcom: spm: Add Subsystem Power Manager driver   Lina Iyer
• [PATCH v3 3/4] irq: Allow multiple clients to register for irq affinity notification   Lina Iyer
• [PATCH v8 0/7] QCOM 8974 and 8084 cpuidle driver   Lina Iyer
• [PATCH v8 5/7] qcom: cpuidle: Add cpuidle driver for QCOM cpus   Lina Iyer
• [PATCH v8 5/7] qcom: cpuidle: Add cpuidle driver for QCOM cpus   Lina Iyer
• [PATCH v8 0/7] QCOM 8974 and 8084 cpuidle driver   Lina Iyer
• [PATCH v8 5/7] qcom: cpuidle: Add cpuidle driver for QCOM cpus   Lina Iyer
• [PATCH v9 0/9] cpuidle driver for QCOM SoCs: 8064, 8074, 8084   Lina Iyer
• [PATCH v9 1/9] qcom: scm: scm_set_warm_boot_addr() to set the warmboot address   Lina Iyer
• [PATCH v9 2/9] qcom: spm: Add Subsystem Power Manager driver   Lina Iyer
• [PATCH v9 3/9] arm: dts: qcom: Add power-controller device node for 8974 Krait CPUs   Lina Iyer
• [PATCH v9 4/9] arm: dts: qcom: Add power-controller device node for 8084 Krait CPUs   Lina Iyer
• [PATCH v9 5/9] arm: dts: qcom: Update power-controller device node for 8064 Krait CPUs   Lina Iyer
• [PATCH v9 6/9] qcom: cpuidle: Add cpuidle driver for QCOM cpus   Lina Iyer
• [PATCH v9 7/9] arm: dts: qcom: Add idle states device nodes for 8974   Lina Iyer
• [PATCH v9 8/9] arm: dts: qcom: Add idle states device nodes for 8084   Lina Iyer
• [PATCH v9 9/9] arm: dts: qcom: Add idle state device nodes for 8064   Lina Iyer
• [PATCH v9 0/9] cpuidle driver for QCOM SoCs: 8064, 8074, 8084   Lina Iyer
• PROBLEM: BUG appearing when trying to allocate interrupt on Exynos MCT after CPU hotplug   Marcin Jabrzyk
• PROBLEM: BUG appearing when trying to allocate interrupt on Exynos MCT after CPU hotplug   Marcin Jabrzyk
• PROBLEM: BUG appearing when trying to allocate interrupt on Exynos MCT after CPU hotplug   Marcin Jabrzyk
• [PATCH v1] clk: pxa clocks build system fix   Robert Jarzmik
• [PATCH] Revert "ARM: pxa: call debug_ll_io_init for earlyprintk"   Robert Jarzmik
• [PATCH] Revert "ARM: pxa: call debug_ll_io_init for earlyprintk"   Robert Jarzmik
• [PATCH v1] clk: pxa clocks build system fix   Robert Jarzmik
• [PATCH] Revert "ARM: pxa: call debug_ll_io_init for earlyprintk"   Robert Jarzmik
• [PATCH v1 0/5] Fixes for the pxa common clocks   Robert Jarzmik
• [PATCH v1 1/5] clk: pxa: fix pxa27x CCCR bit usage   Robert Jarzmik
• [PATCH v1 2/5] clk: pxa: declare init function and data __init   Robert Jarzmik
• [PATCH v1 3/5] clk: pxa: keep clocks initialization separated per variant   Robert Jarzmik
• [PATCH v1 4/5] DON'T MERGE ME: arm: pxa: change clocks init sequence   Robert Jarzmik
• [PATCH v1 5/5] DON'T MERGE ME: clk: pxa: migrate to the clk_core API   Robert Jarzmik
• [PATCH] Revert "ARM: pxa: call debug_ll_io_init for earlyprintk"   Robert Jarzmik
• [PATCH] Revert "ARM: pxa: call debug_ll_io_init for earlyprintk"   Robert Jarzmik
• [PATCH v2 0/4] Add support for pxa27x device-tree machine   Robert Jarzmik
• [PATCH v2 1/4] arm: pxa: add device-tree irq init for pxa27x   Robert Jarzmik
• [PATCH v2 2/4] arm: pxa: move init functions into generic.h   Robert Jarzmik
• [PATCH v2 3/4] arm: pxa: remove unecessary includes from pxa-dt   Robert Jarzmik
• [PATCH v2 4/4] arm: pxa: add pxa27x device-tree support   Robert Jarzmik
• [PATCH v2 1/4] arm: pxa: add device-tree irq init for pxa27x   Robert Jarzmik
• [PATCH] Revert "ARM: pxa: call debug_ll_io_init for earlyprintk"   Robert Jarzmik
• [GIT PULL] arm: pxa: fixes against v3.18-rc1   Robert Jarzmik
• [PATCH 1/2] ARM: pxa: spitz: register spitz-audio device   Robert Jarzmik
• [GIT PULL] arm: pxa: fixes against v3.18-rc1   Robert Jarzmik
• [GIT PULL] arm: pxa: fixes against v3.18-rc1   Robert Jarzmik
• [PATCH 12/15] ARM: pxa: poodle: don't preallocate IRQ space for locomo   Robert Jarzmik
• [PATCH] ARM: pxa: tosa: switch to gpio-charger   Robert Jarzmik
• [PATCH v1 0/5] Fixes for the pxa common clocks   Robert Jarzmik
• [PATCH v2 0/4] Add support for pxa27x device-tree machine   Robert Jarzmik
• [PATCH] ASoC: rockchip-max98090: add driver for rockchip board using a max98090   Jianqun
• [PATCH v2 2/2] ASoC: rockchip-max98090: add driver for rockchip board using a max98090   Jianqun
• [PATCH 0/2] rockchip-max98090: add driver for rockchip board with max98090   Jianqun
• [PATCH 1/2] ASoC: rockchip-max98090: add driver for rockchip board using a max98090   Jianqun
• [PATCH 2/2] ASoC: rockchip-max98090: add documentation for rockchip-max98090 driver   Jianqun
• [PATCH] clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate   Jianqun
• [PATCH v2] clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate   Jianqun
• [PATCH] clk: rockchip: rk3288: removing the CLK_SET_RATE_PARENT from i2s_clkout   Jianqun
• [PATCH 1/2] ASoC: rockchip-max98090: add driver for rockchip board using a max98090   Jianqun
• [PATCH] ASoC: rockchip-i2s: add rockchip-max98090 driver support   Jianqun
• [PATCH] ASoC: rockchip-i2s: add rockchip-max98090 driver support   Jianqun
• [PATCH v3] ASoC: rockchip-i2s: add MAX98090 support to Kconfig   Jianqun
• [PATCH] ASoC: rockchip-i2s: fix infinite loop in rockchip_snd_rxctrl   Jianqun
• [PATCH v2] ASoC: rockchip: i2s: add text after tristate for SND_SOC_ROCKCHIP_I2S   Jianqun
• [PATCH v2 0/6] UIO driver for APM X-Gene QMTM   Ankit Jindal
• [PATCH v2 0/6] UIO driver for APM X-Gene QMTM   Ankit Jindal
• [PATCH v2 0/6] UIO driver for APM X-Gene QMTM   Ankit Jindal
• [PATCH v2 4/6] drivers: uio: Add X-Gene QMTM UIO driver   Ankit Jindal
• [PATCH v3 0/6] UIO driver for APM X-Gene QMTM   Ankit Jindal
• [PATCH v3 1/6] uio: code style cleanup   Ankit Jindal
• [PATCH v3 2/6] uio: Add new UIO_MEM_PHYS_CACHE type for mem regions   Ankit Jindal
• [PATCH v3 3/6] Documentation: Update documentation for UIO_MEM_PHYS_CACHE   Ankit Jindal
• [PATCH v3 4/6] uio: Add X-Gene QMTM UIO driver   Ankit Jindal
• [PATCH v3 5/6] Documentation: dt-bindings: Add binding info for X-Gene QMTM UIO driver   Ankit Jindal
• [PATCH v3 6/6] MAINTAINERS: Add entry for APM X-Gene QMTM UIO driver   Ankit Jindal
• [PATCH v3 4/6] uio: Add X-Gene QMTM UIO driver   Ankit Jindal
• [PATCH v3 4/6] uio: Add X-Gene QMTM UIO driver   Ankit Jindal
• [PATCH v3 2/6] uio: Add new UIO_MEM_PHYS_CACHE type for mem regions   Ankit Jindal
• [PATCH v3 5/6] Documentation: dt-bindings: Add binding info for X-Gene QMTM UIO driver   Ankit Jindal
• [PATCH v3 5/6] Documentation: dt-bindings: Add binding info for X-Gene QMTM UIO driver   Ankit Jindal
• [RFT v2 01/24] irqdomain: Introduce new interfaces to support hierarchy irqdomains   Joe.C
• [PATCH v2 2/4] ARM: mediatek: Add Pinctrl/GPIO driver for mt8135.   Joe.C
• [PATCH v3 0/7] ARM: mediatek: Add support for interrupt polarity   Joe.C
• [PATCH v3 1/7] irqdomain: Fix irq_domain_alloc_irqs return check.   Joe.C
• [PATCH v3 2/7] genirq: Add more helper functions to support stacked irq_chip   Joe.C
• [PATCH v3 3/7] irqchip: gic: Support hierarchy irq domain.   Joe.C
• [PATCH v3 4/7] ARM: mediatek: Add sysirq interrupt polarity support   Joe.C
• [PATCH v3 5/7] ARM: mediatek: Add sysirq in mt6589/mt8135/mt8127 dtsi   Joe.C
• [PATCH v3 6/7] dt-bindings: add irq domain parent binding   Joe.C
• [PATCH v3 7/7] dt-bindings: add bindings for mediatek sysirq   Joe.C
• [PATCH v3 4/7] ARM: mediatek: Add sysirq interrupt polarity support   Joe.C
• [PATCH v3 3/7] irqchip: gic: Support hierarchy irq domain.   Joe.C
• [PATCH v4 0/8] arm: Add basic support for MediaTek MT8127 & MT8135 SoCs   Joe.C
• [PATCH v4 1/8] ARM: mediatek: Add basic support for mt8127   Joe.C
• [PATCH v4 2/8] ARM: mediatek: add dts for 8127 Moose board   Joe.C
• [PATCH v4 3/8] ARM: mediatek: Add basic support for mt8135   Joe.C
• [PATCH v4 4/8] ARM: mediatek: add dts for MT8135 evaluation board.   Joe.C
• [PATCH v4 5/8] dt-bindings: add more chips in documentation for Mediatek SoC   Joe.C
• [PATCH v4 6/8] ARM: dts: Build dtb for mt8127 & mt8135   Joe.C
• [PATCH v4 7/8] ARM: mediatek: Add earlyprintk support for mt8127 & mt8135   Joe.C
• [PATCH v4 8/8] ARM: mediatek: Add config option for mediatek SoCs.   Joe.C
• [PATCH] ARM: sunxi_defconfig: enable CONFIG_REGULATOR   Olof Johansson
• [GIT PULL] Two omap fixes for v3.18 merge window   Olof Johansson
• [GIT PULL 1/2] Samsung fixes for v3.18   Olof Johansson
• [GIT PULL 2/2] Samsung defconfig updates for v3.18   Olof Johansson
• [PATCH] MAINTAINERS: Update Santosh Shilimkar's email id   Olof Johansson
• [PATCH] MAINTAINERS: update Shawn's email address   Olof Johansson
• [PATCH V2 1/2] MAINTAINERS: add Alexandre Courbot for Tegra   Olof Johansson
• [PATCH v4 05/12] memory: Add NVIDIA Tegra memory controller support   Olof Johansson
• [PATCH v4 05/12] memory: Add NVIDIA Tegra memory controller support   Olof Johansson
• [GIT PULL] qcom SoC changes for v3.18   Olof Johansson
• [PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella   Olof Johansson
• [PATCH] ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854   Olof Johansson
• [PATCH] MAINTAINERS: corrected bcm2835 search   Olof Johansson
• RCU bug with v3.17-rc3 ?   Olof Johansson
• [GIT PULL] qcom DT changes for v3.18-3   Olof Johansson
• [GIT PULL] ARM: SoC fixes for 3.18-rc1   Olof Johansson
• [PATCH] ARM: sunxi_defconfig: enable CONFIG_REGULATOR   Olof Johansson
• [PATCH] ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP   Olof Johansson
• [PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella   Olof Johansson
• [PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella   Olof Johansson
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Olof Johansson
• [GIT PULL] Xilinx Zynq dt fixes for v3.18   Olof Johansson
• [GIT PULL] at91: fixes for 3.18 #1   Olof Johansson
• [GIT PULL] SOCFPGA fixes for 3.18   Olof Johansson
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Olof Johansson
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Olof Johansson
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Olof Johansson
• [GIT PULL] ARM: imx: fixes for 3.18   Olof Johansson
• [GIT PULL]: ARM: SoC fixes for -rc2   Olof Johansson
• [GIT PULL] arm: pxa: fixes against v3.18-rc1   Olof Johansson
• [GIT PULL] arm: pxa: fixes against v3.18-rc1   Olof Johansson
• [GIT PULL] SOCFPGA defconfig update for v3.19   Olof Johansson
• [PATCH v7] mfd: syscon: Decouple syscon interface from platform devices   Lee Jones
• [PATCH 11/27] mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper   Lee Jones
• [PATCH 11/27] mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper   Lee Jones
• [PATCH 18/44] mfd: twl4030-power: Register with kernel poweroff handler   Lee Jones
• [PATCH 12/44] mfd: ab8500-sysctrl: Register with kernel poweroff handler   Lee Jones
• [PATCH] pwm-backlight: Turn off pwm backlight in probe   Lee Jones
• [PATCH v7] mfd: syscon: Decouple syscon interface from platform devices   Lee Jones
• [PATCH 1/7] mfd: max77693: Add defines for MAX77693 charger driver   Lee Jones
• [PATCH v2 0/4] watchdog: Introduce new driver to support ST's Watchdog   Lee Jones
• [PATCH 1/4] ARM: STi: DT: STiH407: Add Device Tree node for LPC Watchdog   Lee Jones
• [PATCH 2/4] ARM: multi_v7_defconfig: Enable support for ST's LPC Watchdog   Lee Jones
• [PATCH 3/4] watchdog: st_wdt: Provide binding documentation for ST's LPC Watchdog driver   Lee Jones
• [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog   Lee Jones
• [RFC 6/7] mfd: qcom-smd-rpm: Driver for the Qualcomm RPM over SMD   Lee Jones
• [PATCH v3 0/4] watchdog: Introduce new driver to support ST's Watchdog   Lee Jones
• [PATCH 1/4] ARM: STi: DT: STiH407: Add Device Tree node for LPC Watchdog   Lee Jones
• [PATCH 2/4] ARM: multi_v7_defconfig: Enable support for ST's LPC Watchdog   Lee Jones
• [PATCH 3/4] watchdog: st_wdt: Provide binding documentation for ST's LPC Watchdog driver   Lee Jones
• [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog   Lee Jones
• [PATCH v2 0/8] mtd: nand: Support for new DT NAND driver   Lee Jones
• [PATCH 8/9] mtd: nand: stm_nand_bch: add support for ST's BCH NAND controller   Lee Jones
• [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog   Lee Jones
• [PATCH 12/44] mfd: ab8500-sysctrl: Register with kernel poweroff handler   Lee Jones
• [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog   Lee Jones
• [PATCH 12/44] mfd: ab8500-sysctrl: Register with kernel poweroff handler   Lee Jones
• [PATCH 8/9] mtd: nand: stm_nand_bch: add support for ST's BCH NAND controller   Lee Jones
• [PATCH 5/8] mfd: ab8500: Use power_supply_*() API for accessing function attrs   Lee Jones
• [PATCH v2 7/7] mfd: ab8500: Decrement the power supply's device reference counter   Lee Jones
• [PATCH v2 7/7] mfd: ab8500: Decrement the power supply's device reference counter   Lee Jones
• [RFC 6/7] mfd: qcom-smd-rpm: Driver for the Qualcomm RPM over SMD   Lee Jones
• [RFC Patch 1/4] mfd: AXP20x: Add power supply bindings documentation   Lee Jones
• [PATCH v3 1/2] Revert "mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption"   Lee Jones
• [PATCH v2 3/4] mfd/regulator: dt-bindings: max77686: Document regulators off in suspend   Lee Jones
• [PATCH v3 3/4] mfd/regulator: dt-bindings: max77686: Document regulators off in suspend   Lee Jones
• [PATCH v7] mfd: syscon: Decouple syscon interface from platform devices   Lee Jones
• [PATCH v1 1/5] mfd: tps65910: Convert ti, system-power-controller DT property to poweroff-source   Lee Jones
• [PATCH v1 1/5] mfd: tps65910: Convert ti, system-power-controller DT property to poweroff-source   Lee Jones
• [PATCH 3/4] watchdog: st_wdt: Provide binding documentation for ST's LPC Watchdog driver   Lee Jones
• [PATCH v4 0/4] watchdog: Introduce new driver to support ST's Watchdog   Lee Jones
• [PATCH 1/4] ARM: STi: DT: STiH407: Add Device Tree node for LPC Watchdog   Lee Jones
• [PATCH 2/4] ARM: multi_v7_defconfig: Enable support for ST's LPC Watchdog   Lee Jones
• [PATCH 3/4] watchdog: st_wdt: Provide binding documentation for ST's LPC Watchdog driver   Lee Jones
• [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog   Lee Jones
• [PATCH] mailbox: Enable BCM2835 mailbox support   Lee Jones
• [PATCH] bcm2835: add VideoCore Mailbox to the device tree   Lee Jones
• [PATCH] mailbox: Enable BCM2835 mailbox support   Lee Jones
• [PATCH] bcm2835: add VideoCore Mailbox to the device tree   Lee Jones
• [PATCH v2] arm64/efi: efistub: jump to 'stext' directly, not through the header   Peter Jones
• [PATCH v3] arm64/efi: efistub: jump to 'stext' directly, not through the header   Peter Jones
• [PATCH V4 1/6] mm: Introduce a general RCU get_user_pages_fast.   Aneesh Kumar K.V
• [PATCH V4 1/6] mm: Introduce a general RCU get_user_pages_fast.   Aneesh Kumar K.V
• [PATCH V4 1/6] mm: Introduce a general RCU get_user_pages_fast.   Aneesh Kumar K.V
• [PATCH] serial/core: Initialize the console pm state   Greg KH
• [RFC] drop owner assignment from platform_drivers   Greg KH
• [RFC] drop owner assignment from platform_drivers   Greg KH
• RCU bug with v3.17-rc3 ?   Greg KH
• [PATCH 00/15] new locomo driver   Greg KH
• [PATCH 1/3] arm64: psci: warn if psci_power_state variable is not initialised   Amit Kachhap
• [PATCH 1/3] arm64: psci: warn if psci_power_state variable is not initialised   Amit Daniel Kachhap
• [PATCH 2/3] arm64: psci: fix cpu_suspend to check idle state type for index   Amit Daniel Kachhap
• [PATCH 3/3] arm64: psci: Add support to call cpu_suspend with deepest C state.   Amit Daniel Kachhap
• [PATCH v2] arm64: psci: fix cpu_suspend to check idle state type for index   Amit Daniel Kachhap
• [PATCH 0/4] ARM: get a strict multiplatform kernel that can run on any hardware   Xia Kaixu
• [PATCH 1/4] ARM: introduce a CONFIG_ARCH_MULTIPLATFORM_STRICT Kconfig option   Xia Kaixu
• [PATCH 2/4] ARM: change the corresponding arm/mach defconfigs   Xia Kaixu
• [PATCH 3/4] ARM: restrict CPU_BIG_ENDIAN configuration option   Xia Kaixu
• [PATCH 4/4] ARM: allow errata and XIP options to be enabled without ARCH_MULTIPLATFORM_STRICT   Xia Kaixu
• [PATCH v2 0/5] ARM: get a strict multiplatform kernel that can run on any hardware   Xia Kaixu
• [PATCH v2 1/5] ARM: introduce a CONFIG_ARCH_MULTIPLATFORM_STRICT Kconfig option   Xia Kaixu
• [PATCH v2 2/5] ARM: change the corresponding arm/mach defconfigs   Xia Kaixu
• [PATCH v2 3/5] ARM: restrict CPU_BIG_ENDIAN configuration option   Xia Kaixu
• [PATCH v2 4/5] ARM: allow errata and XIP options to be enabled without ARCH_MULTIPLATFORM_STRICT   Xia Kaixu
• [PATCH v2 5/5] ARM: use early console instead of early debug in allmodconfig kernels   Xia Kaixu
• [Patch] imx: thermal: imx_get_temp might be called before the sensor clock ist prepared   Heiner Kallweit
• [PATCH] imx: thermal: imx_get_temp might be called before the sensor clock ist prepared   Heiner Kallweit
• [PATCH] imx: thermal: imx_get_temp might be called before the sensor clock ist prepared   Heiner Kallweit
• [PATCH] imx: thermal: imx_get_temp might be called before the sensor clock ist prepared   Heiner Kallweit
• [PATCH v2] imx: thermal: imx_get_temp might be called before sensor clock is prepared   Heiner Kallweit
• [PATCH v3] imx: thermal: imx_get_temp might be called before sensor clock is prepared   Heiner Kallweit
• Setting cpu affinity for MSI-X on i.mx6 possible?   Heiner Kallweit
• Setting cpu affinity for MSI-X on i.mx6 possible?   Heiner Kallweit
• Setting cpu affinity for MSI-X on i.mx6 possible?   Heiner Kallweit
• [PATCH] compat: fix compat types affecting struct compat_elf_prpsinfo   Victor Kamensky
• [PATCH] arm64: compat: fix compat types affecting struct compat_elf_prpsinfo   Victor Kamensky
• [PATCH] arm64: compat: fix compat types affecting struct compat_elf_prpsinfo   Victor Kamensky
• [RFC PATCH] arm/arm64: KVM: Fix BE accesses to GICv2 EISR and ELRSR regs   Victor Kamensky
• [PATCH] arm64: compat: fix compat types affecting struct compat_elf_prpsinfo   Victor Kamensky
• [PATCH] arm64: compat: fix compat types affecting struct compat_elf_prpsinfo   Victor Kamensky
• [RFC PATCH] arm/arm64: KVM: Fix BE accesses to GICv2 EISR and ELRSR regs   Victor Kamensky
• [PATCH 0/6] APM X-Gene platform mailbox and proxy i2c driver   Feng Kan
• [PATCH 1/6] mailbox: add support for APM X-Gene platform mailbox driver   Feng Kan
• [PATCH 2/6] Documentation: mailbox: Add APM X-Gene SLIMpro mailbox dts documentation   Feng Kan
• [PATCH 3/6] arm64: dts: mailbox device tree node for APM X-Gene platform.   Feng Kan
• [PATCH 4/6] i2c: busses: add SLIMpro I2C device driver on APM X-Gene platform   Feng Kan
• [PATCH 5/6] Documentation: i2c: Add APM X-Gene platform SLIMpro I2C driver documentation   Feng Kan
• [PATCH 6/6] arm64: dts: add proxy I2C device driver on APM X-Gene platform   Feng Kan
• [PATCH] genirq: Introduce irq_read_line()   Feng Kan
• [PATCH 0/7] APM X-Gene SoC platform device tree cleanup   Feng Kan
• [PATCH 1/7] arm64: dts: Add APM X-Gene USB 2.0 DTS node   Feng Kan
• [PATCH 2/7] Documentation: arm64: add SCU dts binding documentation to linux kernel   Feng Kan
• [PATCH 3/7] arm64: dts: Add X-Gene reboot driver dts node   Feng Kan
• [PATCH 4/7] arm64: dts: Add Designware GPIO dts binding to APM X-Gene platform   Feng Kan
• [PATCH 5/7] arm64: dts: Add APM X-Gene SoC GFC GPIO controller DTS entries   Feng Kan
• [PATCH 6/7] Documentation: arm: pmu: Add Potenza PMU binding   Feng Kan
• [PATCH 7/7] arm64: dts: Add PMU node for APM X-Gene Storm SOC   Feng Kan
• [PATCH 1/7] arm64: dts: Add APM X-Gene USB 2.0 DTS node   Feng Kan
• [PATCH RESEND 0/7] APM X-Gene SoC platform device tree cleanup   Feng Kan
• [PATCH RESEND 1/7] arm64: dts: Add APM X-Gene USB DTS node   Feng Kan
• [PATCH RESEND 2/7] Documentation: arm64: add SCU dts binding documentation to linux kernel   Feng Kan
• [PATCH RESEND 3/7] arm64: dts: Add X-Gene reboot driver dts node   Feng Kan
• [PATCH RESEND 4/7] arm64: dts: Add Designware GPIO dts binding to APM X-Gene platform   Feng Kan
• [PATCH RESEND 5/7] arm64: dts: Add APM X-Gene SoC GFC GPIO controller DTS entries   Feng Kan
• [PATCH RESEND 6/7] Documentation: arm: pmu: Add Potenza PMU binding   Feng Kan
• [PATCH RESEND 7/7] arm64: dts: Add PMU node for APM X-Gene Storm SOC   Feng Kan
• [PATCH v3 0/4] ARM: dts: apq8064 DT patches   Srinivas Kandagatla
• [PATCH v3 1/4] ARM: dts: apq8064: add RPM regulators support   Srinivas Kandagatla
• [PATCH v3 2/4] ARM: dts: apq8064: Add usb host support.   Srinivas Kandagatla
• [PATCH v3 3/4] ARM: dts: apq8064: Add USB OTG support   Srinivas Kandagatla
• [PATCH v3 4/4] ARM: dts: apq8064: Add SATA controller support.   Srinivas Kandagatla
• [PATCH v2 04/15] clk: divider: Make generic for usage elsewhere   Srinivas Kandagatla
• [PATCH v2 04/15] clk: divider: Make generic for usage elsewhere   Srinivas Kandagatla
• [PATCH v2 04/15] clk: divider: Make generic for usage elsewhere   Srinivas Kandagatla
• [PATCH] ARM: multi_v7_defconfig: fix support for APQ8084   Srinivas Kandagatla
• [PATCH 0/4] ARM: shmobile: Add clock to DT   Yoshihiro Kaneko
• [PATCH 1/4] ARM: shmobile: r8a7790: Add RGX clock to device tree   Yoshihiro Kaneko
• [PATCH 2/4] ARM: shmobile: r8a7791: Add SGX clock to device tree   Yoshihiro Kaneko
• [PATCH 3/4] ARM: shmobile: r8a7790: Add MMP clock to device tree   Yoshihiro Kaneko
• [PATCH 4/4] ARM: shmobile: r8a7791: Add MMP clock to device tree   Yoshihiro Kaneko
• [PATCH 3/4] ARM: shmobile: r8a7790: Add MMP clock to device tree   Yoshihiro Kaneko
• [PATCH 0/4] ARM: shmobile: Add clock to DT   Yoshihiro Kaneko
• [PATCH 1/4] ARM: shmobile: r8a7790: Add RGX clock to device tree   Yoshihiro Kaneko
• [PATCH 2/4] ARM: shmobile: r8a7791: Add SGX clock to device tree   Yoshihiro Kaneko
• [PATCH 3/4] ARM: shmobile: r8a7790: Add MMP clock to device tree   Yoshihiro Kaneko
• [PATCH 4/4] ARM: shmobile: r8a7791: Add MMP clock to device tree   Yoshihiro Kaneko
• [PATCH v4 0/5] Simplify hotplug/suspend handling   Saravana Kannan
• [PATCH] ARM: dts: am335x-boneblack: set dcdc1 regulator for 1.35v ddr3   Jan Kardell
• [PATCH] ARM: keystone: add bus notifier to set dma_pfn_offset for pci devices   Murali Karicheri
• [PATCH] ARM: keystone: add bus notifier to set dma_pfn_offset for pci devices   Murali Karicheri
• [PATCH] ARM: keystone: add bus notifier to set dma_pfn_offset for pci devices   Murali Karicheri
• [PATCH] ARM: keystone: add bus notifier to set dma_pfn_offset for pci devices   Murali Karicheri
• [PATCH 1/2] ARM: dts: k2e-mvm: add 1g ethernet phys nodes   Murali Karicheri
• [PATCH 2/2] ARM: dts: k2l-mvm: add 1g ethernet phys nodes   Murali Karicheri
• [PATCH 1/2] ARM: keystone_defconfig: enable dsp irq and gpio support   Murali Karicheri
• [PATCH 0/4] Enable PCI controller for Keystone SoCs   Murali Karicheri
• [PATCH 1/4] ARM: keystone: add pcie related options   Murali Karicheri
• [PATCH 2/4] ARM: keystone: defconfig: add options to enable PCI controller   Murali Karicheri
• [PATCH 3/4] ARM: keystone: dts: add DT bindings for PCI controller for port 0   Murali Karicheri
• [PATCH 4/4] ARM: keystone: dts: add DT bindings for PCI controller for port 1   Murali Karicheri
• [PATCH 0/4] Enable PCI controller for Keystone SoCs   Murali Karicheri
• [PATCH 0/4] Enable PCI controller for Keystone SoCs   Murali Karicheri
• [PATCH 0/4] Enable PCI controller for Keystone SoCs   Murali Karicheri
• [PATCH v1 0/4] Enable PCI controller for Keystone SoCs   Murali Karicheri
• [PATCH v1 1/4] ARM: keystone: add pcie related options   Murali Karicheri
• [PATCH v1 2/4] ARM: keystone: defconfig: add options to enable PCI controller   Murali Karicheri
• [PATCH v1 3/4] ARM: dts: keystone: add DT bindings for PCI controller for port 0   Murali Karicheri
• [PATCH v1 4/4] ARM: dts: keystone-k2e: add DT bindings for PCI controller for port 1   Murali Karicheri
• [PATCH v1 0/4] Enable PCI controller for Keystone SoCs   Murali Karicheri
• [PATCH v2 0/4] Enable PCI controller for Keystone SoCs   Murali Karicheri
• [PATCH v2 1/4] ARM: keystone: add pcie related options   Murali Karicheri
• [PATCH v2 2/4] ARM: keystone: defconfig: add options to enable PCI controller   Murali Karicheri
• [PATCH v2 3/4] ARM: dts: keystone: add DT bindings for PCI controller for port 0   Murali Karicheri
• [PATCH v2 4/4] ARM: dts: keystone-k2e: add DT bindings for PCI controller for port 1   Murali Karicheri
• [RESEND: PATCH v2 0/4] Enable PCI controller for Keystone SoCs   Murali Karicheri
• [PATCH] arm64: dts: exynos7: add support for cpuidle core power down   Chander Kashyap
• [PATCH] arm64: dts: exynos7: add support for cpuidle core power down   Chander Kashyap
• [PATCH v2] arm64: dts: exynos7: add support for cpuidle core power down   Chander Kashyap
• [PATCH v3] i2c: rk3x: adjust the LOW divison based on characteristics of SCL   Addy Ke
• [PATCH v4] i2c: rk3x: adjust the LOW divison based on characteristics of SCL   Addy Ke
• [PATCH v5] i2c: rk3x: adjust the LOW divison based on characteristics of SCL   Addy Ke
• [PATCH v6] i2c: rk3x: adjust the LOW divison based on characteristics of SCL   Addy Ke
• [PATCH 0/2] spi: fix two bugs   Addy Ke
• [PATCH 1/2] spi/rockchip: fix bug that case spi can't go as fast as slave request   Addy Ke
• [PATCH 2/2] spi/rockchip: fix bug that cause spi transfer timed out in DMA duplex mode   Addy Ke
• [PATCH] spi/rockchip: spi controller must be disabled in tx callback too   Addy Ke
• [PATCH] mmc: dw_mmc: add a quirk for the defferent bit of sdio interrupt   Addy Ke
• [PATCH] mmc: dw_mmc: add support for the other bit of sdio interrupt   Addy Ke
• [PATCH v2] mmc: dw_mmc: add support for the other bit of sdio interrupt   Addy Ke
• [PATCH v2 1/2] arch: arm: samsung: Clean-up usage of CONFIG_SERIAL_SAMSUNG_UARTS symbol   Abhilash Kesavan
• [PATCH v2 2/2] tty: serial: samsung: Clean-up selection of number of available UARTs   Abhilash Kesavan
• [PATCH v8 2/2] ARM: exynos5: Add Suspend-to-RAM support for 5420   Abhilash Kesavan
• [PATCH v8] ARM: EXYNOS: Use MCPM call-backs to support S2R on Exynos5420   Abhilash Kesavan
• [PATCH v4 0/6] Add initial support for pinctrl on Exynos7   Abhilash Kesavan
• [PATCH v8] ARM: EXYNOS: Use MCPM call-backs to support S2R on Exynos5420   Abhilash Kesavan
• [PATCH v8] ARM: EXYNOS: Use MCPM call-backs to support S2R on Exynos5420   Abhilash Kesavan
• [PATCH v9] ARM: EXYNOS: Use MCPM call-backs to support S2R on Exynos5420   Abhilash Kesavan
• [PATCH v5 0/8] arch: arm64: Enable support for Samsung Exynos7 SoC   Abhilash Kesavan
• [PATCH v5 0/8] arch: arm64: Enable support for Samsung Exynos7 SoC   Abhilash Kesavan
• [PATCH v4 0/6] Add initial support for pinctrl on Exynos7   Abhilash Kesavan
• [PATCH v9 0/2] Adds PMU and S2R support for exynos5420   Abhilash Kesavan
• [PATCH v5 0/6] Add initial support for pinctrl on Exynos7   Abhilash Kesavan
• [PATCH v5 1/6] pinctrl: exynos: Generalize the eint16_31 demux code   Abhilash Kesavan
• [PATCH v5 2/6] pinctrl: exynos: Consolidate irq domain callbacks   Abhilash Kesavan
• [PATCH v5 3/6] pinctrl: exynos: Add irq_chip instance for Exynos7 wakeup interrupts   Abhilash Kesavan
• [PATCH v5 4/6] pinctrl: exynos: Add initial driver data for Exynos7   Abhilash Kesavan
• [PATCH v5 5/6] arm64: dts: Add initial pinctrl support to EXYNOS7   Abhilash Kesavan
• [PATCH v5 6/6] arm64: exynos: Enable pinctrl support for Exynos7   Abhilash Kesavan
• [PATCH v9 0/2] Adds PMU and S2R support for exynos5420   Abhilash Kesavan
• [PATCH 0/7] Add clock and DT support for a few IPs on Exynos7   Abhilash Kesavan
• [PATCH 1/7] clk: samsung: exynos7: add clocks for I2C block   Abhilash Kesavan
• [PATCH 2/7] clk: samsung: exynos7: add clocks for MMC block   Abhilash Kesavan
• [PATCH 3/7] clk: samsung: exynos7: add clocks for RTC block   Abhilash Kesavan
• [PATCH 4/7] clk: samsung: exynos7: add gate clocks for WDT, TMU and PWM blocks   Abhilash Kesavan
• [PATCH 5/7] arm64: dts: Add PMU DT node for exynos7 SoC   Abhilash Kesavan
• [PATCH 6/7] arm64: dts: Add nodes for mmc, i2c, rtc, watchdog on Exynos7   Abhilash Kesavan
• [PATCH 7/7] arm64: exynos: Enable rtc and watchdog support for Exynos7   Abhilash Kesavan
• [PATCH v2 1/2] arch: arm: samsung: Clean-up usage of CONFIG_SERIAL_SAMSUNG_UARTS symbol   Abhilash Kesavan
• [GIT PULL] dts, kbuild: Implement support for dtb vendor subdirs   Abhilash Kesavan
• [PATCH 2/7] clk: samsung: exynos7: add clocks for MMC block   Abhilash Kesavan
• [PATCH v5 0/6] Add initial support for pinctrl on Exynos7   Abhilash Kesavan
• [PATCH v2 0/7] Add clock and DT support for a few IPs on Exynos7   Abhilash Kesavan
• [PATCH v2 1/7] clk: samsung: exynos7: add clocks for I2C block   Abhilash Kesavan
• [PATCH v2 2/7] clk: samsung: exynos7: add clocks for MMC block   Abhilash Kesavan
• [PATCH v2 3/7] clk: samsung: exynos7: add clocks for RTC block   Abhilash Kesavan
• [PATCH v2 4/7] clk: samsung: exynos7: add gate clocks for WDT, TMU and PWM blocks   Abhilash Kesavan
• [PATCH v2 5/7] arm64: dts: Add PMU DT node for exynos7 SoC   Abhilash Kesavan
• [PATCH v2 6/7] arm64: dts: Add nodes for mmc, i2c, rtc, watchdog on Exynos7   Abhilash Kesavan
• [PATCH v2 7/7] arm64: exynos: Enable rtc and watchdog support for Exynos7   Abhilash Kesavan
• [PATCH v2 6/7] arm64: dts: Add nodes for mmc, i2c, rtc, watchdog on Exynos7   Abhilash Kesavan
• [PATCH v5 0/8] arch: arm64: Enable support for Samsung Exynos7 SoC   Abhilash Kesavan
• [PATCH v5 0/6] Add initial support for pinctrl on Exynos7   Abhilash Kesavan
• [PATCH v2 1/2] arch: arm: samsung: Clean-up usage of CONFIG_SERIAL_SAMSUNG_UARTS symbol   Abhilash Kesavan
• [PATCH v2 3/7] clk: samsung: exynos7: add clocks for RTC block   Abhilash Kesavan
• [PATCH v3 0/5] Add clock support for a few IPs on Exynos7   Abhilash Kesavan
• [PATCH v3 1/5] clk: samsung: exynos7: add clocks for I2C block   Abhilash Kesavan
• [PATCH v3 2/5] clk: samsung: exynos7: add clocks for MMC block   Abhilash Kesavan
• [PATCH v3 3/5] clk: samsung: exynos7: add clocks for RTC block   Abhilash Kesavan
• [PATCH v3 4/5] clk: samsung: exynos7: add gate clocks for WDT, TMU and PWM blocks   Abhilash Kesavan
• [PATCH v3 5/5] clk: samsung: exynos7: add gate clock for ADC block   Abhilash Kesavan
• [PATCH v2 2/2] tty: serial: samsung: Clean-up selection of number of available UARTs   Abhilash Kesavan
• [PATCH v2 2/2] tty: serial: samsung: Clean-up selection of number of available UARTs   Abhilash Kesavan
• [PATCH 08/20] mmc: host: pxamci: switch over to dmaengine use   Vasily Khoruzhick
• [PATCH 08/20] mmc: host: pxamci: switch over to dmaengine use   Vasily Khoruzhick
• [PATCH] arm64: kgdb: fix single stepping   Vijay Kilari
• [PATCH v2 3/4] mm: cma: Ensure that reservations never cross the low/high mem boundary   Joonsoo Kim
• DMA allocations from CMA and fatal_signal_pending check   Joonsoo Kim
• linux-next: build failure after merge of the arm-soc tree   Kukjin Kim
• [GIT PULL 1/3] 3rd Round for Samsung-cleanup-2 for v3.18   Kukjin Kim
• [PATCH] ARM: dts: Specify Odroid X2/U3 audio clock parents and rates   Kukjin Kim
• [PATCH v9 0/2] ARM: Exynos: Convert PMU implementation into a platform driver   Kukjin Kim
• [PATCH v5 0/8] arch: arm64: Enable support for Samsung Exynos7 SoC   Kukjin Kim
• [PATCH v9 0/2] Adds PMU and S2R support for exynos5420   Kukjin Kim
• [GIT PULL 1/2] Samsung fixes for v3.18   Kukjin Kim
• [GIT PULL 2/2] Samsung defconfig updates for v3.18   Kukjin Kim
• [GIT PULL 2/2] Samsung defconfig updates for v3.18   Kukjin Kim
• [GIT PULL 2/2] Samsung defconfig updates for v3.18   Kukjin Kim
• [GIT PULL 2/2] Samsung defconfig updates for v3.18   Kukjin Kim
• [GIT PULL 2nd] Samsung fixes 2nd for v3.18   Kukjin Kim
• [GIT PULL 1/3] 1st Round of Samsung cleanup for v3.19   Kukjin Kim
• [GIT PULL 2/3] 1st Round of Samsung PM updates for v3.19   Kukjin Kim
• [GIT PULL 3/3] 1st Round of Samsung DT updates for v3.19   Kukjin Kim
• [GIT PULL 2/3] 1st Round of Samsung PM updates for v3.19   Kukjin Kim
• [PATCHv4 0/3] ARM: dts: Add new board dts file for Exynos3250-based Rinato board   Kukjin Kim
• [GIT PULL 2/3 v2] 1st Round of Samsung PM updates for v3.19   Kukjin Kim
• [PATCHv2 1/2] ARM: EXYNOS: Add EXYNOS4415 SoC ID   Kukjin Kim
• [PATCHv2 1/2] ARM: EXYNOS: Add EXYNOS4415 SoC ID   Kukjin Kim
• [PATCH v9] ARM: EXYNOS: Use MCPM call-backs to support S2R on Exynos5420   Kukjin Kim
• [PATCH v9] ARM: EXYNOS: Use MCPM call-backs to support S2R on Exynos5420   Kukjin Kim
• [PATCH v2 2/2] tty: serial: samsung: Clean-up selection of number of available UARTs   Kukjin Kim
• [PATCH] ARM: EXYNOS: fix typo in static struct name "exynos5_list_diable_wfi_wfe"   Kukjin Kim
• [PATCHv3 2/2] ARM: dts: Add dts files for Exynos4415 SoC   Kukjin Kim
• [PATCH v2] ARM: dts: exynos4412-trats: Add micro SD card SDHCI node   Kukjin Kim
• [PATCH 1/1] ARM: exynos_defconfig: Enable max77802 rtc and clock drivers   Kukjin Kim
• [PATCH v17 5/7] arm: add pmd_mkclean for THP   Minchan Kim
• [PATCH v17 6/7] arm64: add pmd_[dirty|mkclean] for THP   Minchan Kim
• [PATCH] ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854   Russell King
• [PATCH 1/4] ARM: dts: hummingboard: Split HummingBoard DT to support s/dl and d/q   Russell King
• [PATCH 2/4] ARM: dts: hummingboard: add mSATA support for iMX6 quad/dual HummingBoard   Russell King
• [PATCH 3/4] ARM: dts: hummingboard: gpio-ir on gpio 3,5   Russell King
• [PATCH 4/4] ARM: dts: hummingboard: fix configuration of IR input   Russell King
• [PATCH 09/16] tty: serial: 8250_dma: Add a TX trigger workaround for AM33xx   Frans Klaver
• [PATCH v2] imx: thermal: imx_get_temp might be called before sensor clock is prepared   Uwe Kleine-König
• [RFC 2/7] clocksource: add dependencies for Vybrid pit clocksource   Uwe Kleine-König
• [RFC 2/7] clocksource: add dependencies for Vybrid pit clocksource   Uwe Kleine-König
• [PATCH] arm64: mm: use macro instead of if judgement of ZONE_DMA   Uwe Kleine-König
• Unconditional registering EMDA platform devices   Uwe Kleine-König
• [PATCH 1/2] ARM: socfpga: Add driver for the L3 interconnect   Uwe Kleine-König
• [PATCH 1/4] input: touchscreen: ti_am335x_tsc Interchange touchscreen and ADC steps   Hartmut Knaack
• [PATCH 3/4] arm: boot: dts: am335x-evm: Make charge delay a DT parameter for tsc   Hartmut Knaack
• [PATCH] at91sam9_wdt: Allow watchdog to reset device at early boot   Timo Kokkonen
• [PATCH] mmc: host: atmel-mci: Add support for non-removable slots   Timo Kokkonen
• [PATCH] wil6210: remove obsolete msm platform code   Vladimir Kondratiev
• [linux-sunxi] [PATCH v5 2/4] ARM: sunxi: dt: Add DT bindings documentation for SUNXI Security System   Koen Kooi
• [linux-sunxi] [PATCH 4/6] ARM: dts: sun9i: Add GPIO LEDs for A80 Optimus board   Koen Kooi
• RCU bug with v3.17-rc3 ?   Aaro Koskinen
• RCU bug with v3.17-rc3 ?   Aaro Koskinen
• USB Ethernet gadget on Nokia n900   Aaro Koskinen
• USB Ethernet gadget on Nokia n900   Aaro Koskinen
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Aaro Koskinen
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Aaro Koskinen
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Aaro Koskinen
• [PATCH 11/27] mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper   Vinod Koul
• [PATCH v2 2/2] Documentation: dmaengine: Add a documentation for the dma controller API   Vinod Koul
• [PATCH v2 2/2] Documentation: dmaengine: Add a documentation for the dma controller API   Vinod Koul
• [PATCH 00/12] dmaengine: remove users of device_control   Vinod Koul
• [PATCH 02/12] dmaengine: coh901318: use dmaengine_terminate_all() API   Vinod Koul
• [PATCH v6 1/3] dma: at_xdmac: creation of the atmel eXtended DMA Controller driver   Vinod Koul
• [PATCH v4] dma: Add Xilinx AXI Direct Memory Access Engine driver support   Vinod Koul
• [PATCH v6 2/3] ARM: dts: at_xdmac: add bindings documentation   Vinod Koul
• [PATCH 09/13] dmaengine: edma: check for echan->edesc => NULL in edma_dma_pause()   Vinod Koul
• [PATCH 09/13] dmaengine: edma: check for echan->edesc => NULL in edma_dma_pause()   Vinod Koul
• [PATCH 00/12] dmaengine: remove users of device_control   Vinod Koul
• [PATCH 00/11] dmaengine: Cleanup chancnt   Vinod Koul
• [PATCH v6 1/3] dma: at_xdmac: creation of the atmel eXtended DMA Controller driver   Vinod Koul
• [PATCH v6 1/3] dma: at_xdmac: creation of the atmel eXtended DMA Controller driver   Vinod Koul
• [PATCH v6 1/3] dma: at_xdmac: creation of the atmel eXtended DMA Controller driver   Vinod Koul
• [PATCH] VNIC: Adding support for Cavium ThunderX network controller   Sunil Kovvuri
• [PATCH 0/7] power/mfd: Add max77693 charger driver   Krzysztof Kozlowski
• [PATCH 1/7] mfd: max77693: Add defines for MAX77693 charger driver   Krzysztof Kozlowski
• [PATCH 2/7] power: max77693: Add charger driver for Maxim 77693   Krzysztof Kozlowski
• [PATCH 3/7] devicetree: mfd: max77693: Document new bindings for charger   Krzysztof Kozlowski
• [PATCH 4/7] Documentation: charger: max77693: Document exported sysfs entry   Krzysztof Kozlowski
• [PATCH 5/7] ARM: dts: exynos4412-trats: Add max77693 charger node   Krzysztof Kozlowski
• [PATCH 6/7] ARM: exynos_defconfig: Enable Maxim 77693 charger   Krzysztof Kozlowski
• [PATCH 7/7] ARM: multi_v7_defconfig: Enable Maxim 77693 charger   Krzysztof Kozlowski
• [PATCH v2 2/4] regulator: Set ena_gpio_initialized in regulator drivers   Krzysztof Kozlowski
• [PATCH 1/3] ARM: exynos_defconfig: Enable Maxim 77836 for Gear2 board   Krzysztof Kozlowski
• [PATCH 2/3] ARM: multi_v7_defconfig: Enable Maxim 77836 for Gear2 board   Krzysztof Kozlowski
• [PATCH 3/3] ARM: multi_v7_defconfig: Enable clock and RTC driver for S2M and S5M   Krzysztof Kozlowski
• [PATCH 0/8] power_supply: Add API for safe access of get_property-like function attrs   Krzysztof Kozlowski
• [PATCH 1/8] power_supply: Add API for safe access of power supply function attrs   Krzysztof Kozlowski
• [PATCH 2/8] power_supply: sysfs: Use power_supply_*() API for accessing function attrs   Krzysztof Kozlowski
• [PATCH 3/8] power: 88pm860x_charger: Use power_supply_*() API for accessing function attrs   Krzysztof Kozlowski
• [PATCH 4/8] power: ab8500: Use power_supply_*() API for accessing function attrs   Krzysztof Kozlowski
• [PATCH 5/8] mfd: ab8500: Use power_supply_*() API for accessing function attrs   Krzysztof Kozlowski
• [PATCH 6/8] power: apm_power: Use power_supply_*() API for accessing function attrs   Krzysztof Kozlowski
• [PATCH 7/8] power: bq2415x_charger: Use power_supply_*() API for accessing function attrs   Krzysztof Kozlowski
• [PATCH 8/8] power: charger-manager: Use power_supply_*() API for accessing function attrs   Krzysztof Kozlowski
• [PATCH 0/7] power_supply: Decrement the device reference counter   Krzysztof Kozlowski
• [PATCH 1/7] power_supply: Add power_supply_put for decrementing device reference counter   Krzysztof Kozlowski
• [PATCH 2/7] power: charger-manager: Decrement the power supply's device reference counter   Krzysztof Kozlowski
• [PATCH 3/7] x86/olpc/xo1/sci: Use newly added power_supply_put API   Krzysztof Kozlowski
• [PATCH 4/7] x86/olpc/xo15/sci: Use newly added power_supply_put API   Krzysztof Kozlowski
• [PATCH 5/7] power: 88pm860x_charger: Decrement the power supply's device reference counter   Krzysztof Kozlowski
• [PATCH 6/7] power: bq2415x_charger: Decrement the power supply's device reference counter   Krzysztof Kozlowski
• [PATCH 7/7] mfd: ab8500: Decrement the power supply's device reference counter   Krzysztof Kozlowski
• [PATCH 2/8] power_supply: sysfs: Use power_supply_*() API for accessing function attrs   Krzysztof Kozlowski
• [PATCH 0/7] power_supply: Decrement the device reference counter   Krzysztof Kozlowski
• [PATCH v2 0/8] power_supply: Add API for safe access of get_property-like function attrs   Krzysztof Kozlowski
• [PATCH v2 1/8] power_supply: Add API for safe access of power supply function attrs   Krzysztof Kozlowski
• [PATCH v2 2/8] power_supply: sysfs: Use power_supply_*() API for accessing function attrs   Krzysztof Kozlowski
• [PATCH v2 3/8] power: 88pm860x_charger: Use power_supply_*() API for accessing function attrs   Krzysztof Kozlowski
• [PATCH v2 4/8] power: ab8500: Use power_supply_*() API for accessing function attrs   Krzysztof Kozlowski
• [PATCH v2 5/8] mfd: ab8500: Use power_supply_*() API for accessing function attrs   Krzysztof Kozlowski
• [PATCH v2 6/8] power: apm_power: Use power_supply_*() API for accessing function attrs   Krzysztof Kozlowski
• [PATCH v2 7/8] power: bq2415x_charger: Use power_supply_*() API for accessing function attrs   Krzysztof Kozlowski
• [PATCH v2 8/8] power: charger-manager: Use power_supply_*() API for accessing function attrs   Krzysztof Kozlowski
• [PATCH v2 0/7] power_supply: Decrement the device reference counter   Krzysztof Kozlowski
• [PATCH v2 1/7] power_supply: Add power_supply_put for decrementing device reference counter   Krzysztof Kozlowski
• [PATCH v2 2/7] power: charger-manager: Decrement the power supply's device reference counter   Krzysztof Kozlowski
• [PATCH v2 3/7] x86/olpc/xo1/sci: Use newly added power_supply_put API   Krzysztof Kozlowski
• [PATCH v2 4/7] x86/olpc/xo15/sci: Use newly added power_supply_put API   Krzysztof Kozlowski
• [PATCH v2 5/7] power: 88pm860x_charger: Decrement the power supply's device reference counter   Krzysztof Kozlowski
• [PATCH v2 6/7] power: bq2415x_charger: Decrement the power supply's device reference counter   Krzysztof Kozlowski
• [PATCH v2 7/7] mfd: ab8500: Decrement the power supply's device reference counter   Krzysztof Kozlowski
• [PATCH v2 7/7] mfd: ab8500: Decrement the power supply's device reference counter   Krzysztof Kozlowski
• [PATCH 0/2] regulator: max77686/trats2: Disable some regulators in suspend   Krzysztof Kozlowski
• [PATCH 1/2] regulator: max77686: Implement suspend disable for some LDOs   Krzysztof Kozlowski
• [PATCH 2/2] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators   Krzysztof Kozlowski
• [PATCH 2/2] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators   Krzysztof Kozlowski
• [PATCH 1/2] regulator: max77686: Implement suspend disable for some LDOs   Krzysztof Kozlowski
• [PATCH 2/2] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators   Krzysztof Kozlowski
• [PATCH v2 0/4] regulator: max77686/trats2: Disable some regulators in suspend   Krzysztof Kozlowski
• [PATCH v2 1/4] regulator: max77686: Replace hard-coded opmode values with defines   Krzysztof Kozlowski
• [PATCH v2 2/4] regulator: max77686: Implement suspend disable for some LDOs   Krzysztof Kozlowski
• [PATCH v2 3/4] mfd/regulator: dt-bindings: max77686: Document regulators off in suspend   Krzysztof Kozlowski
• [PATCH v2 4/4] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators   Krzysztof Kozlowski
• [PATCH v2 1/4] regulator: max77686: Replace hard-coded opmode values with defines   Krzysztof Kozlowski
• [PATCH v2 4/4] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators   Krzysztof Kozlowski
• [PATCH v3 0/4] regulator: max77686/trats2: Disable some regulators in suspend   Krzysztof Kozlowski
• [PATCH v3 1/4] regulator: max77686: Replace hard-coded opmode values with defines   Krzysztof Kozlowski
• [PATCH v3 2/4] regulator: max77686: Implement suspend disable for some LDOs   Krzysztof Kozlowski
• [PATCH v3 3/4] mfd/regulator: dt-bindings: max77686: Document regulators off in suspend   Krzysztof Kozlowski
• [PATCH v3 4/4] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators   Krzysztof Kozlowski
• [RFC 0/2] PM and DRM: Add runtime PM to Exynos DSI   Krzysztof Kozlowski
• [RFC 1/2] PM / Domains: Power on domain early during system resume   Krzysztof Kozlowski
• [RFC 2/2] drm/exynos/dsi: Add runtime PM so LCD power domain could be turned off   Krzysztof Kozlowski
• [RFC 1/2] PM / Domains: Power on domain early during system resume   Krzysztof Kozlowski
• [PATCH v4 0/3] regulator: max77686/trats2: Disable some regulators in suspend   Krzysztof Kozlowski
• [PATCH v4 1/3] regulator: max77686: Replace hard-coded opmode values with defines   Krzysztof Kozlowski
• [PATCH v4 2/3] regulator: max77686: Implement suspend disable for some LDOs   Krzysztof Kozlowski
• [PATCH v4 3/3] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators   Krzysztof Kozlowski
• [PATCH v4 2/3] regulator: max77686: Implement suspend disable for some LDOs   Krzysztof Kozlowski
• [PATCH v4 2/3] regulator: max77686: Implement suspend disable for some LDOs   Krzysztof Kozlowski
• [PATCH v5 0/4] regulator: max77686/trats2: Disable some regulators in suspend   Krzysztof Kozlowski
• [PATCH v5 1/4] regulator: max77686: Replace hard-coded opmode values with defines   Krzysztof Kozlowski
• [PATCH v5 2/4] regulator: max77686: Store opmode non-shifted   Krzysztof Kozlowski
• [PATCH v5 3/4] regulator: max77686: Add suspend disable for some LDOs   Krzysztof Kozlowski
• [PATCH v5 4/4] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators   Krzysztof Kozlowski
• [PATCH v5 2/4] regulator: max77686: Store opmode non-shifted   Krzysztof Kozlowski
• [PATCH] ARM: dts: exynos4412-trats: Add micro SD card SDHCI node   Krzysztof Kozlowski
• [PATCH v2] ARM: dts: exynos4412-trats: Add micro SD card SDHCI node   Krzysztof Kozlowski
• [PATCH 0/8] regulator: max77686: Add GPIO control   Krzysztof Kozlowski
• [PATCH 1/8] regulator: max77802: Remove support for board files   Krzysztof Kozlowski
• [PATCH 2/8] regulator: max77686: Remove support for board files   Krzysztof Kozlowski
• [PATCH 3/8] mfd: max77686/802: Remove support for board files   Krzysztof Kozlowski
• [PATCH 4/8] regulator: max77686: Make regulator_desc array const   Krzysztof Kozlowski
• [PATCH 5/8] regulator: max77686: Initialize opmode explicitly to normal mode   Krzysztof Kozlowski
• [PATCH 6/8] regulator: max77686: Add external GPIO control   Krzysztof Kozlowski
• [PATCH 7/8] mfd/regulator: dt-bindings: max77686: Document gpio property   Krzysztof Kozlowski
• [PATCH 8/8] ARM: dts: exynos4412-trats: Switch max77686 regulators to GPIO control   Krzysztof Kozlowski
• [PATCH 2/8] regulator: max77686: Remove support for board files   Krzysztof Kozlowski
• [PATCH 1/8] regulator: max77802: Remove support for board files   Krzysztof Kozlowski
• [PATCH 6/8] regulator: max77686: Add external GPIO control   Krzysztof Kozlowski
• [PATCH 7/8] mfd/regulator: dt-bindings: max77686: Document gpio property   Krzysztof Kozlowski
• [PATCH 3/8] mfd: max77686/802: Remove support for board files   Krzysztof Kozlowski
• [PATCH 6/8] regulator: max77686: Add external GPIO control   Krzysztof Kozlowski
• [PATCH v5 3/4] regulator: max77686: Add suspend disable for some LDOs   Krzysztof Kozlowski
• [PATCH v5 3/4] regulator: max77686: Add suspend disable for some LDOs   Krzysztof Kozlowski
• [PATCH 6/8] regulator: max77686: Add external GPIO control   Krzysztof Kozlowski
• [PATCH v5 3/4] regulator: max77686: Add suspend disable for some LDOs   Krzysztof Kozlowski
• [PATCH v5 3/4] regulator: max77686: Add suspend disable for some LDOs   Krzysztof Kozlowski
• [PATCH v6 0/3] regulator: max77686/trats2: Disable some regulators in suspend   Krzysztof Kozlowski
• [PATCH v6 1/3] regulator: max77686: Add suspend disable for some LDOs   Krzysztof Kozlowski
• [PATCH v6 2/3] regulator: max77802: Remove suspend_enable   Krzysztof Kozlowski
• [PATCH v6 3/3] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators   Krzysztof Kozlowski
• [PATCH v2 0/8] regulator: max77686: Add GPIO control   Krzysztof Kozlowski
• [PATCH v2 1/8] regulator: max77686: Consistently index opmode array by rdev id   Krzysztof Kozlowski
• [RFT v2 2/8] regulator: max77802: Remove support for board files   Krzysztof Kozlowski
• [PATCH v2 3/8] regulator: max77686: Remove support for board files   Krzysztof Kozlowski
• [PATCH v2 4/8] mfd: max77686/802: Remove support for board files   Krzysztof Kozlowski
• [PATCH v2 5/8] regulator: max77686: Initialize opmode explicitly to normal mode   Krzysztof Kozlowski
• [PATCH v2 6/8] regulator: max77686: Add GPIO control   Krzysztof Kozlowski
• [PATCH v2 7/8] mfd/regulator: dt-bindings: max77686: Document gpio property   Krzysztof Kozlowski
• [PATCH v2 8/8] ARM: dts: exynos4412-trats: Switch max77686 regulators to GPIO control   Krzysztof Kozlowski
• [RFC 1/2] PM / Domains: Power on domain early during system resume   Krzysztof Kozlowski
• [RFT v2 2/8] regulator: max77802: Remove support for board files   Krzysztof Kozlowski
• [PATCH v3 00/14] regulator: max77686: Add GPIO control   Krzysztof Kozlowski
• [PATCH v3 01/14] mfd: max77686/802: Map regulator driver to its own of_node   Krzysztof Kozlowski
• [PATCH v3 02/14] mfd/regulator: dt-bindings: max77686: Document of_compatible for regulator   Krzysztof Kozlowski
• [PATCH v3 03/14] regulator: dt-bindings: max77802: Document of_compatible for regulator   Krzysztof Kozlowski
• [PATCH v3 04/14] regulator: max77686: Consistently index opmode array by rdev id   Krzysztof Kozlowski
• [RFT v3 05/14] regulator: max77802: Don't ignore return value of current opmode   Krzysztof Kozlowski
• [RFT v3 06/14] regulator: max77802: Remove support for board files   Krzysztof Kozlowski
• [PATCH v3 07/14] regulator: max77686: Remove support for board files   Krzysztof Kozlowski
• [PATCH v3 08/14] mfd: max77686/802: Remove support for board files   Krzysztof Kozlowski
• [PATCH v3 09/14] regulator: max77686: Initialize opmode explicitly to normal mode   Krzysztof Kozlowski
• [PATCH v3 10/14] regulator: max77686: Add GPIO control   Krzysztof Kozlowski
• [PATCH v3 11/14] mfd/regulator: dt-bindings: max77686: Document gpio properties   Krzysztof Kozlowski
• [PATCH v3 12/14] ARM: dts: exynos4412-trats: Switch max77686 regulators to GPIO control   Krzysztof Kozlowski
• [PATCH v3 13/14] ARM: dts: exynos5420-peach: Update to new max77802 regulator compatible   Krzysztof Kozlowski
• [PATCH v3 14/14] ARM: dts: exynos5800-peach: Update to new max77802 regulator compatible   Krzysztof Kozlowski
• [RFT v3 06/14] regulator: max77802: Remove support for board files   Krzysztof Kozlowski
• [RFT v3 06/14] regulator: max77802: Remove support for board files   Krzysztof Kozlowski
• [RFT v3 06/14] regulator: max77802: Remove support for board files   Krzysztof Kozlowski
• [PATCH 6/8] regulator: max77686: Add external GPIO control   Krzysztof Kozlowski
• [PATCH 6/8] regulator: max77686: Add external GPIO control   Krzysztof Kozlowski
• [PATCH 6/8] regulator: max77686: Add external GPIO control   Krzysztof Kozlowski
• [PATCH v3 01/14] mfd: max77686/802: Map regulator driver to its own of_node   Krzysztof Kozlowski
• [RFT] ARM: shmobile: rcar-gen2: Fix build breakage   Krzysztof Kozlowski
• [PATCH 2/5] regulator: Set ena_gpio_valid in regulator drivers   Krzysztof Kozłowski
• [PATCH 5/5] regulator: Remove unnecessary ena_gpio initializations   Krzysztof Kozłowski
• [PATCH v3 0/2] ARM: EXYNOS: Call regulator suspend prepare/finish   Krzysztof Kozłowski
• [PATCHv3 1/3] ARM: dts: Add board dts file for Exynos3250-based Rinato board   Krzysztof Kozłowski
• [PATCH] clk: prevent erronous parsing of children during rate change   Tero Kristo
• [PATCH 0/5] ARM: OMAP3+: DPLL: fix set_rate logic   Tero Kristo
• [PATCH 1/5] ARM: OMAP3: clock: use clk_features flags for omap3 DPLL4 checks   Tero Kristo
• [PATCH 2/5] ARM: OMAP3: clock: add new rate changing logic support for noncore DPLLs   Tero Kristo
• [PATCH 3/5] ARM: OMAP4: clock: add support for determine_rate for omap4 regm4xen DPLL   Tero Kristo
• [PATCH 4/5] ARM: OMAP3: clock: add support for dpll4_set_rate_and_parent   Tero Kristo
• [PATCH 5/5] ARM: OMAP3+: DPLL: use determine_rate() and set_rate_and_parent()   Tero Kristo
• [PATCH 0/2] ARM: OMAP3+: VCVP mapping fixes to get DVFS working   Tero Kristo
• [PATCH 1/2] ARM: OMAP3+: TWL: add support for mapping platform data via pdata-quirks   Tero Kristo
• [PATCH 2/2] regulator: twl: use platform data in the DT based boot also   Tero Kristo
• [PATCH 2/2] regulator: twl: use platform data in the DT based boot also   Tero Kristo
• [REPOST PATCH 0/2] ARM: OMAP3+: VCVP mapping fixes to get DVFS working   Tero Kristo
• [REPOST PATCH 1/2] ARM: OMAP3+: TWL: add support for mapping platform data via pdata-quirks   Tero Kristo
• [REPOST PATCH 2/2] regulator: twl: use platform data in the DT based boot also   Tero Kristo
• [PATCH 1/2] ARM: OMAP3+: TWL: add support for mapping platform data via pdata-quirks   Tero Kristo
• [REPOST PATCH 0/2] ARM: OMAP3+: VCVP mapping fixes to get DVFS working   Tero Kristo
• [REPOST PATCH 0/2] ARM: OMAP3+: VCVP mapping fixes to get DVFS working   Tero Kristo
• [REPOST PATCH 0/2] ARM: OMAP3+: VCVP mapping fixes to get DVFS working   Tero Kristo
• [PATCH 29/44] staging: nvec: Register with kernel poweroff handler   Greg Kroah-Hartman
• [PATCH 1/3] staging: drm/imx: parallel-display: Add 24-bit BGR support   Greg Kroah-Hartman
• [PATCH 1/2] MAINTAINERS: add atmel ssc driver maintainer entry   Greg Kroah-Hartman
• [PATCH 12/13] tty: serial: 8250: omap: add custom irq handling   Heikki Krogerus
• [PATCH v8 0/7] QCOM 8974 and 8084 cpuidle driver   Amit Kucheria
• [RFC PATCH 2/4] arm/arm64:dt:numa: adding numa node mapping for memory nodes.   Ganapatrao Kulkarni
• [RFC PATCH 1/4] arm64: defconfig: increase NR_CPUS range to 2-128   Ganapatrao Kulkarni
• [RFC PATCH 4/4] arm64:numa: adding numa support for arm64 platforms.   Ganapatrao Kulkarni
• [RFC PATCH 2/4] arm/arm64:dt:numa: adding numa node mapping for memory nodes.   Ganapatrao Kulkarni
• [RFC PATCH 4/4] arm64:numa: adding numa support for arm64 platforms.   Ganapatrao Kulkarni
• [RFC PATCH 4/4] arm64:numa: adding numa support for arm64 platforms.   Ganapatrao Kulkarni
• [RFC PATCH 4/4] arm64:numa: adding numa support for arm64 platforms.   Ganapatrao Kulkarni
• [RFC PATCH 4/4] arm64:numa: adding numa support for arm64 platforms.   Ganapatrao Kulkarni
• [PATCH v4 0/5] Simplify hotplug/suspend handling   Viresh Kumar
• [PATCH v11 5/6] cpufreq: exynos: remove exynos4210/5250 specific cpufreq driver support   Viresh Kumar
• [PATCH 0/3] Rockchip IOMMU driver and devicetree bindings   Daniel Kurtz
• [PATCH 1/3] iommu/rockchip: rk3288 iommu driver   Daniel Kurtz
• [PATCH 2/3] dt-bindings: iommu: Add documentation for rockchip iommu   Daniel Kurtz
• [PATCH 3/3] ARM: dts: rk3288: add VOP iommu nodes   Daniel Kurtz
• [PATCH v2 1/3] iommu/rockchip: rk3288 iommu driver   Daniel Kurtz
• [PATCH v2 3/3] ARM: dts: rk3288: add VOP iommu nodes   Daniel Kurtz
• [PATCH v3 1/3] iommu/rockchip: rk3288 iommu driver   Daniel Kurtz
• [PATCH v3 3/3] ARM: dts: rk3288: add VOP iommu nodes   Daniel Kurtz
• [PATCH v3 3/3] ARM: dts: rk3288: add VOP iommu nodes   Daniel Kurtz
• [PATCH v4 1/3] iommu/rockchip: rk3288 iommu driver   Daniel Kurtz
• [PATCH v4 3/3] ARM: dts: rk3288: add VOP iommu nodes   Daniel Kurtz
• [PATCH v5 1/3] iommu/rockchip: rk3288 iommu driver   Daniel Kurtz
• [PATCH v5 3/3] ARM: dts: rk3288: add VOP iommu nodes   Daniel Kurtz
• [PATCH v5 1/3] iommu/rockchip: rk3288 iommu driver   Daniel Kurtz
• [PATCH 0/3] Rockchip IOMMU driver and devicetree bindings   Daniel Kurtz
• [PATCH v5 1/3] iommu/rockchip: rk3288 iommu driver   Daniel Kurtz
• [PATCH v5 3/3] ARM: dts: rk3288: add VOP iommu nodes   Daniel Kurtz
• [PATCH v5 1/3] iommu/rockchip: rk3288 iommu driver   Daniel Kurtz
• [PATCH v6 1/3] iommu/rockchip: rk3288 iommu driver   Daniel Kurtz
• [PATCH v6 3/3] ARM: dts: rk3288: add VOP iommu nodes   Daniel Kurtz
• [PATCH] usb: ehci/ohci: use SIMPLE_DEV_PM_OPS to support hibernation   Wonhong Kwon
• [PATCH v2] usb: ehci/ohci-platform: use SIMPLE_DEV_PM_OPS to support hibernation   Wonhong Kwon
• [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator   Corentin LABBE
• [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator   Corentin LABBE
• [linux-sunxi] Re: [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator   Corentin LABBE
• [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator   Corentin LABBE
• [PATCH v2] MAINTAINERS: drop list entry for davinci   Lad, Prabhakar
• RCU bug with v3.17-rc3 ?   David Laight
• [PATCH] ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854   David Laight
• [PATCHv2 6/6] net: fec: fix regression on i.MX28 introduced by rx_copybreak support   David Laight
• [PATCHv2 6/6] net: fec: fix regression on i.MX28 introduced by rx_copybreak support   David Laight
• [PATCHv2 6/6] net: fec: fix regression on i.MX28 introduced by rx_copybreak support   David Laight
• [percpu] Convert remaining __get_cpu_var uses in 3.18-rcX   Christoph Lameter
• FP register corruption in Exynos 4210 (Cortex-A9)   Lanchon
• FP register corruption in Exynos 4210 (Cortex-A9)   Lanchon
• FP register corruption in Exynos 4210 (Cortex-A9)   Lanchon
• FP register corruption in Exynos 4210 (Cortex-A9)   Lanchon
• FP register corruption in Exynos 4210 (Cortex-A9)   Lanchon
• [PATCH 05/44] mfd: as3722: Drop reference to pm_power_off from devicetree bindings   Rob Landley
• [PATCH 05/44] mfd: as3722: Drop reference to pm_power_off from devicetree bindings   Rob Landley
• [usb] add support for APM X-Gene to xhci-platform   Mark Langsdorf
• [PATCH 1/2] [usb] make xhci platform driver use 64 bit or 32 bit DMA   Mark Langsdorf
• [PATCH 2/2] [usb] add support for APM X-Gene to xhci-platform   Mark Langsdorf
• [PATCH 1/2] [usb] make xhci platform driver use 64 bit or 32 bit DMA   Mark Langsdorf
• [PATCH 2/2] [usb] add support for APM X-Gene to xhci-platform   Mark Langsdorf
• [PATCH 1/2] [usb] make xhci platform driver use 64 bit or 32 bit DMA   Mark Langsdorf
• [PATCH 1/2] [usb] make xhci platform driver use 64 bit or 32 bit DMA   Mark Langsdorf
• [PATCH v3 0/4] Add Phytec pbab01 audio support   Dmitry Lavnikevich
• [PATCH v3 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards   Dmitry Lavnikevich
• [PATCH v3 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards   Dmitry Lavnikevich
• [PATCH v4 0/4] Add Phytec pbab01 audio support   Dmitry Lavnikevich
• [PATCH v4 1/4] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02   Dmitry Lavnikevich
• [PATCH v4 2/4] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards   Dmitry Lavnikevich
• [PATCH v4 3/4] ARM: imx_v6_v7_defconfig: enable tlv320aic3x audio codec by default   Dmitry Lavnikevich
• [PATCH v4 4/4] ASoC: tlv320aic3x: fix PLL D configuration   Dmitry Lavnikevich
• [PATCH v4 4/4] ASoC: tlv320aic3x: fix PLL D configuration   Dmitry Lavnikevich
• [PATCH v4 0/3 RESEND] Add Phytec pbab01 audio support   Dmitry Lavnikevich
• [PATCH v4 RESEND 1/3] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02   Dmitry Lavnikevich
• [PATCH v4 RESEND 3/3] ARM: imx_v6_v7_defconfig: enable tlv320aic3x audio codec by default   Dmitry Lavnikevich
• [PATCH v4 RESEND 2/3] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards   Dmitry Lavnikevich
• [PATCH v5 0/3] Add Phytec pbab01 audio support   Dmitry Lavnikevich
• [PATCH v5 1/3] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02   Dmitry Lavnikevich
• [PATCH v5 2/3] ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards   Dmitry Lavnikevich
• [PATCH v5 3/3] ARM: imx_v6_v7_defconfig: enable tlv320aic3x audio codec by default   Dmitry Lavnikevich
• [Cocci] [RFC] drop owner assignment from platform_drivers   Julia Lawall
• [PATCH] ARM: mm: Refine set_memory_* functions   Jungseung Lee
• [PATCH] arm: fix flush_pfn_alias   Jungseung Lee
• [PATCH] arm: fix flush_pfn_alias   Jungseung Lee
• [PATCH] ARM: mm: fix discard_old_kernel_data   Jungseung Lee
• [PATCH] ARM: mm: fix discard_old_kernel_data   Jungseung Lee
• [PATCH 1/2] arm: Introduce {set,clear}_pte_bit   Jungseung Lee
• [PATCH 2/2] arm: mm: Refine set_memory_* functions   Jungseung Lee
• [PATCH 1/2] arm: hwcap: add new hwcap for identifying PXN bits   Jungseung Lee
• [PATCH 2/2] arm: Support for the PXN CPU feature on ARMv7.   Jungseung Lee
• [PATCH 1/2] arm: hwcap: add new hwcap for identifying PXN bits   Jungseung Lee
• [PATCH RESEND 1/2] arm: hwcap: add new hwcap for identifying PXN bits   Jungseung Lee
• [PATCH RESEND 2/2] arm: Support for the PXN CPU feature on ARMv7.   Jungseung Lee
• [PATCH] arm: Support for the PXN CPU feature on ARMv7.   Jungseung Lee
• [PATCH 1/4] ARM: Kirkwood: Add support for DLink DIR665   Claudio Leite
• [PATCH 0/7] arm64 kexec kernel patches V3   Geoff Levand
• [PATCH 6/7] arm64/kexec: Add core kexec support   Geoff Levand
• [PATCH 0/7] arm64 kexec kernel patches V3   Geoff Levand
• [PATCH 2/7] arm64: Convert hcalls to use ISS field   Geoff Levand
• [PATCH 1/7] arm64/kvm: Fix assembler compatibility of macros   Geoff Levand
• [PATCH 4/8] arm64: Add EL2 switch to soft_restart   Geoff Levand
• [PATCH 3/8] arm64: Add new hcall HVC_CALL_FUNC   Geoff Levand
• [PATCH 1/8] arm64/kvm: Fix assembler compatibility of macros   Geoff Levand
• [PATCH 6/8] arm64/kexec: Add core kexec support   Geoff Levand
• [PATCH 5/8] arm64: Move proc-macros.S to include/asm   Geoff Levand
• [PATCH 7/8] arm64/kexec: Enable kexec in the arm64 defconfig   Geoff Levand
• [PATCH 0/8] arm64 kexec kernel patches V4   Geoff Levand
• [PATCH 2/8] arm64: Convert hcalls to use ISS field   Geoff Levand
• [PATCH 8/8] arm64/kexec: Add pr_devel output   Geoff Levand
• [PATCH 0/7] arm64 kexec kernel patches V3   Geoff Levand
• [PATCH 0/7] arm64 kexec kernel patches V3   Geoff Levand
• [PATCH 6/7] arm64/kexec: Add core kexec support   Geoff Levand
• [PATCH 0/7] arm64 kexec kernel patches V3   Geoff Levand
• [PATCH 6/7] arm64/kexec: Add core kexec support   Geoff Levand
• [PATCH 6/7] arm64/kexec: Add core kexec support   Geoff Levand
• [RFC PATCH] arm64/efi: use stable virtual mappings for UEFI runtime services   Geoff Levand
• [RFC PATCH] arm64/efi: use stable virtual mappings for UEFI runtime services   Geoff Levand
• [PATCH 6/7] arm64/kexec: Add core kexec support   Geoff Levand
• [PATCH 07/10] arm64: Move proc-macros.S to include/asm   Geoff Levand
• [PATCH 05/10] arm64: Convert dts to use reserved-memory nodes   Geoff Levand
• [PATCH 02/10] arm64: Convert hcalls to use ISS field   Geoff Levand
• [PATCH 03/10] arm64: Add new hcall HVC_CALL_FUNC   Geoff Levand
• [PATCH 06/10] arm64: Update booting.txt to reserved-memory nodes   Geoff Levand
• [PATCH 08/10] arm64/kexec: Add core kexec support   Geoff Levand
• [PATCH 00/10] arm64 kexec kernel patches V5   Geoff Levand
• [PATCH 04/10] arm64: Add EL2 switch to soft_restart   Geoff Levand
• [PATCH 01/10] arm64/kvm: Fix assembler compatibility of macros   Geoff Levand
• [PATCH 09/10] arm64/kexec: Enable kexec in the arm64 defconfig   Geoff Levand
• [PATCH 10/10] arm64/kexec: Add pr_devel output   Geoff Levand
• [PATCH V2 01/10] arm64/kvm: Fix assembler compatibility of macros   Geoff Levand
• [PATCH 00/10] arm64 kexec kernel patches V5   Geoff Levand
• [PATCH 05/10] arm64: Convert dts to use reserved-memory nodes   Geoff Levand
• [PATCH 04/10] arm64: Add EL2 switch to soft_restart   Geoff Levand
• [PATCH 09/10] arm64/kexec: Enable kexec in the arm64 defconfig   Geoff Levand
• [PATCH] ARM: integrator: move AP timer to clocksource   Daniel Lezcano
• [PATCH] ARM/ARM64: arch-timer: fix arch_timer_probed logic   Daniel Lezcano
• [PATCH] ARM/ARM64: arch-timer: fix arch_timer_probed logic   Daniel Lezcano
• [PATCH v8 5/7] qcom: cpuidle: Add cpuidle driver for QCOM cpus   Daniel Lezcano
• [PATCH v8 5/7] qcom: cpuidle: Add cpuidle driver for QCOM cpus   Daniel Lezcano
• [PATCH v8 5/7] qcom: cpuidle: Add cpuidle driver for QCOM cpus   Daniel Lezcano
• [PATCH] ARM/ARM64: arch-timer: fix arch_timer_probed logic   Daniel Lezcano
• [PATCH v12 0/6] arm/KVM: dirty page logging support for ARMv7 (3.17.0-rc1)   Wanpeng Li
• [PATCH v12 0/6] arm/KVM: dirty page logging support for ARMv7 (3.17.0-rc1)   Wanpeng Li
• [PATCH v4] ARM: ls1021a: add gating clocks to IP blocks.   Xiubo Li
• [PATCHv4] arm64: dmi: Add SMBIOS/DMI support   Yi Li
• [PATCH v6] PCI: Layerscape: Add Layerscape PCIe driver   Minghuan Lian
• [PATCH v6] PCI: Layerscape: Add Layerscape PCIe driver   Minghuan Lian
• [PATCH] ARM: dts: sbc-t3x: add DVI display data   Dmitry Lifshitz
• 3.17-rc6 on ODROID: ERROR: Bad of_node_put() on /ehci at 12580000/port at 1   Grant Likely
• [PATCH 05/10] arm64: Convert dts to use reserved-memory nodes   Grant Likely
• [PATCH 06/10] arm64: Update booting.txt to reserved-memory nodes   Grant Likely
• [PATCH 4/6] arm64/efi: move SetVirtualAddressMap() to UEFI stub   Grant Likely
• [PATCH 6/6] arm64/efi: remove idmap manipulations from UEFI code   Grant Likely
• [PATCH 06/10] arm64: Update booting.txt to reserved-memory nodes   Grant Likely
• [PATCH 6/6] arm64/efi: remove idmap manipulations from UEFI code   Grant Likely
• [PATCH 05/10] arm64: Convert dts to use reserved-memory nodes   Grant Likely
• [PATCH 06/10] arm64: Update booting.txt to reserved-memory nodes   Grant Likely
• BPF crash with 3.18-rc1 on arm64 Juno hardware   Z Lim
• [PATCH 1/3] soc: ti: Use list_first_entry_or_null() at appropriate places   Axel Lin
• [PATCH 2/3] soc: ti: knav_qmss_queue: Fix unbalanced locking in knav_pool_create()   Axel Lin
• [PATCH 3/3] soc: ti: knav_qmss_queue: Return proper error if devm_kzalloc fails   Axel Lin
• [PATCH] soc: ti: knav_qmss_queue: Use list_for_each_entry_safe to prevent use after free   Axel Lin
• [PATCH V3 3/3] mfd: palmas: Add support for optional wakeup   Tony Lindgren
• OMAP baseline test results for v3.17-rc7   Tony Lindgren
• [PATCH 00/26] ARM: OMAP2+: PRCM cleanups for 3.18 merge window   Tony Lindgren
• [PATCH 00/13 v10] omap 8250 based UART + DMA   Tony Lindgren
• [PATCH 00/26] ARM: OMAP2+: PRCM cleanups for 3.18 merge window   Tony Lindgren
• [PATCH 00/26] ARM: OMAP2+: PRCM cleanups for 3.18 merge window   Tony Lindgren
• [PATCH 00/26] ARM: OMAP2+: PRCM cleanups for 3.18 merge window   Tony Lindgren
• [PATCH] ARM: dts: Disable smc91x on n900 until bootloader dependency is removed   Tony Lindgren
• [PATCH 1/2] ARM: OMAP3+: TWL: add support for mapping platform data via pdata-quirks   Tony Lindgren
• [GIT PULL] Two omap fixes for v3.18 merge window   Tony Lindgren
• [PATCH 00/12] rtc: omap: fixes and power-off feature   Tony Lindgren
• [PATCH 3/3] arm: dts: omap3-gta04: Extend touchscreen configs   Tony Lindgren
• USB Ethernet gadget on Nokia n900   Tony Lindgren
• USB Ethernet gadget on Nokia n900   Tony Lindgren
• [PATCH 00/12] rtc: omap: fixes and power-off feature   Tony Lindgren
• [PATCH 00/12] rtc: omap: fixes and power-off feature   Tony Lindgren
• OMAP baseline test results for v3.18-rc1   Tony Lindgren
• USB Ethernet gadget on Nokia n900   Tony Lindgren
• OMAP baseline test results for v3.18-rc1   Tony Lindgren
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Tony Lindgren
• [PATCH] ARM: omap2plus_defconfig: Fix errors with NAND BCH   Tony Lindgren
• USB Ethernet gadget on Nokia n900   Tony Lindgren
• USB Ethernet gadget on Nokia n900   Tony Lindgren
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Tony Lindgren
• USB Ethernet gadget on Nokia n900   Tony Lindgren
• Nokia n900 problems in 3.18-rc1 (was Re: USB Ethernet gadget on Nokia n900)   Tony Lindgren
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Tony Lindgren
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Tony Lindgren
• [PATCH 00/10] omap gpmc and board clean-up for v3.19 merge window   Tony Lindgren
• [PATCH 01/10] ARM: dts: Fix bootloader version dependencies by muxing n900 smc91x pins   Tony Lindgren
• [PATCH 02/10] ARM: dts: Fix wrong GPMC size mappings for omaps   Tony Lindgren
• [PATCH 03/10] ARM: dts: Add smc91x GPMC configuration for 2430sdp   Tony Lindgren
• [PATCH 04/10] ARM: dts: Add GPMC timings for omap zoom serial port   Tony Lindgren
• [PATCH 05/10] ARM: OMAP2+: Fix support for multiple devices on a GPMC chip select   Tony Lindgren
• [PATCH 06/10] ARM: OMAP2+: Show bootloader GPMC timings to allow configuring the .dts file   Tony Lindgren
• [PATCH 07/10] ARM: OMAP2+: Require proper GPMC timings for devices   Tony Lindgren
• [PATCH 08/10] ARM: OMAP2+: Drop legacy code for gpmc-smc91x.c   Tony Lindgren
• [PATCH 09/10] ARM: OMAP2+: Drop board file for ti8168evm   Tony Lindgren
• [PATCH 10/10] ARM: omap2plus: Drop board file for 3430sdp   Tony Lindgren
• [PATCH 06/10] ARM: OMAP2+: Show bootloader GPMC timings to allow configuring the .dts file   Tony Lindgren
• [PATCH 01/10] ARM: dts: Fix bootloader version dependencies by muxing n900 smc91x pins   Tony Lindgren
• [PATCH 06/10] ARM: OMAP2+: Show bootloader GPMC timings to allow configuring the .dts file   Tony Lindgren
• [GIT PULL] omap fixes against v3.18-rc2   Tony Lindgren
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Tony Lindgren
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Tony Lindgren
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Tony Lindgren
• [PATCH 0/7] arm64 kexec kernel patches V3   Leif Lindholm
• [PATCH v2 09/10] arm64: dmi: set DMI string as dump stack arch description   Leif Lindholm
• [PATCH v2] dmi: add support for SMBIOS 3.0 64-bit entry point   Leif Lindholm
• [PATCH v2 08/10] arm64: dmi: Add SMBIOS/DMI support   Leif Lindholm
• [PATCH 7/9] dmaengine: Move slave caps to dma_device   Russell King - ARM Linux
• [PATCH] arm: socfpga: fix fetching cpu1start_addr for system with > 2GB of ram   Russell King - ARM Linux
• [PATCH] arm64: Use and error-check DMA_ERROR_CODE   Russell King - ARM Linux
• [PATCH 2/3] ARM: vfp: fix VFPv3 hwcap detection on non-ARM vfp implementations   Russell King - ARM Linux
• [PATCH] ARM: tegra: Move AHB Kconfig to drivers/amba   Russell King - ARM Linux
• linux-next: build failure after merge of the arm-soc tree   Russell King - ARM Linux
• [PATCH v2 2/2] xen/arm: introduce GNTTABOP_cache_flush   Russell King - ARM Linux
• [PATCHv2] arm: socfpga: fix fetching cpu1start_addr for system with > 2GB of ram   Russell King - ARM Linux
• FP register corruption in Exynos 4210 (Cortex-A9)   Russell King - ARM Linux
• [PATCH 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Russell King - ARM Linux
• FP register corruption in Exynos 4210 (Cortex-A9)   Russell King - ARM Linux
• FP register corruption in Exynos 4210 (Cortex-A9)   Russell King - ARM Linux
• FP register corruption in Exynos 4210 (Cortex-A9)   Russell King - ARM Linux
• [PATCH 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC   Russell King - ARM Linux
• FP register corruption in Exynos 4210 (Cortex-A9)   Russell King - ARM Linux
• [RFC] drop owner assignment from platform_drivers   Russell King - ARM Linux
• FP register corruption in Exynos 4210 (Cortex-A9)   Russell King - ARM Linux
• [PATCH] ARM: keystone: add bus notifier to set dma_pfn_offset for pci devices   Russell King - ARM Linux
• RCU bug with v3.17-rc3 ?   Russell King - ARM Linux
• RCU bug with v3.17-rc3 ?   Russell King - ARM Linux
• [RFC] drop owner assignment from platform_drivers   Russell King - ARM Linux
• RCU bug with v3.17-rc3 ?   Russell King - ARM Linux
• RCU bug with v3.17-rc3 ?   Russell King - ARM Linux
• [RFC] drop owner assignment from platform_drivers   Russell King - ARM Linux
• next build: 304 warnings 0 failures (next/next-20141013)   Russell King - ARM Linux
• RCU bug with v3.17-rc3 ?   Russell King - ARM Linux
• [PATCHv3] arm: socfpga: fix fetching cpu1start_addr for SMP   Russell King - ARM Linux
• [PATCH 3.17-rc4 v7 0/6] arm: Implement arch_trigger_all_cpu_backtrace   Russell King - ARM Linux
• [PATCH v4 4/6] ARM: rockchip: add basic smp support for rk3288   Russell King - ARM Linux
• [PATCH v4 4/6] ARM: rockchip: add basic smp support for rk3288   Russell King - ARM Linux
• ARM: issue with memory reservation from DT   Russell King - ARM Linux
• RCU bug with v3.17-rc3 ?   Russell King - ARM Linux
• RCU bug with v3.17-rc3 ?   Russell King - ARM Linux
• arm: JUMP_LABEL and DEBUG_SET_MODULE_RONX should be mutually exclusive?   Russell King - ARM Linux
• [PATCH RFC 2/2] arm: kernel: fix pci_mmap_page_range() offset calculation   Russell King - ARM Linux
• arm: JUMP_LABEL and DEBUG_SET_MODULE_RONX should be mutually exclusive?   Russell King - ARM Linux
• [PATCH] ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854   Russell King - ARM Linux
• Latest build test randconfig errors   Russell King - ARM Linux
• [PATCH 3.17-rc4 v7 0/6] arm: Implement arch_trigger_all_cpu_backtrace   Russell King - ARM Linux
• [PATCH] ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854   Russell King - ARM Linux
• imx6: ipu: wrong pixel clock   Russell King - ARM Linux
• [PATCH] ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854   Russell King - ARM Linux
• RCU bug with v3.17-rc3 ?   Russell King - ARM Linux
• [PATCH] ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854   Russell King - ARM Linux
• [PATCH] ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854   Russell King - ARM Linux
• [PATCH] ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854   Russell King - ARM Linux
• [PATCH] arm: fix flush_pfn_alias   Russell King - ARM Linux
• [PATCH v6 01/10] ARM: add mach-asm9260   Russell King - ARM Linux
• [PATCH v6 02/10] ARM: add lolevel debug support for asm9260   Russell King - ARM Linux
• [PATCHv8 1/2] pwm: Add Allwinner SoC support   Russell King - ARM Linux
• [PATCH v4 1/3] power-domain: add power domain drivers for Rockchip platform   Russell King - ARM Linux
• ARM: issue with memory reservation from DT   Russell King - ARM Linux
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   Russell King - ARM Linux
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   Russell King - ARM Linux
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Russell King - ARM Linux
• [PATCH] RFC: add function for localbus address   Russell King - ARM Linux
• CMA region and highmem   Russell King - ARM Linux
• PROBLEM: BUG appearing when trying to allocate interrupt on Exynos MCT after CPU hotplug   Russell King - ARM Linux
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Russell King - ARM Linux
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Russell King - ARM Linux
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   Russell King - ARM Linux
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Russell King - ARM Linux
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Russell King - ARM Linux
• [PATCH 1/2] arm: hwcap: add new hwcap for identifying PXN bits   Russell King - ARM Linux
• gcc 4.9 build warnings (was: Re: arm-soc build: 2917 warnings 0 failures (arm-soc/v3.18-rc1-20-g06c0773))   Russell King - ARM Linux
• [PATCH RESEND 1/2] arm: hwcap: add new hwcap for identifying PXN bits   Russell King - ARM Linux
• [RFC PATCH 0/1] arm64: Fix /proc/cpuinfo   Russell King - ARM Linux
• [RFC PATCH 0/1] arm64: Fix /proc/cpuinfo   Russell King - ARM Linux
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Russell King - ARM Linux
• gcc 4.9 build warnings (was: Re: next build: 2674 warnings 1 failures (next/next-20141022))   Russell King - ARM Linux
• [PATCH v6 4/7] ARM: l2c: Add support for overriding prefetch settings   Russell King - ARM Linux
• [PATCH 00/15] new locomo driver   Russell King - ARM Linux
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Russell King - ARM Linux
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Russell King - ARM Linux
• [PATCH v6 4/7] ARM: l2c: Add support for overriding prefetch settings   Russell King - ARM Linux
• [PATCH] arm64/dt: add machine name to kernel call stack dump output   Russell King - ARM Linux
• [PATCH v2 3/5] ARM: restrict CPU_BIG_ENDIAN configuration option   Russell King - ARM Linux
• [PATCH v2 4/5] ARM: allow errata and XIP options to be enabled without ARCH_MULTIPLATFORM_STRICT   Russell King - ARM Linux
• [PATCH v2 5/5] ARM: use early console instead of early debug in allmodconfig kernels   Russell King - ARM Linux
• [PATCH v2 1/5] ARM: introduce a CONFIG_ARCH_MULTIPLATFORM_STRICT Kconfig option   Russell King - ARM Linux
• [PATCH v2 4/5] ARM: allow errata and XIP options to be enabled without ARCH_MULTIPLATFORM_STRICT   Russell King - ARM Linux
• [PATCH v2 5/5] ARM: use early console instead of early debug in allmodconfig kernels   Russell King - ARM Linux
• [PATCH v2 3/5] ARM: restrict CPU_BIG_ENDIAN configuration option   Russell King - ARM Linux
• [PATCH v2 4/5] ARM: allow errata and XIP options to be enabled without ARCH_MULTIPLATFORM_STRICT   Russell King - ARM Linux
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Russell King - ARM Linux
• [PATCH] ARM: l2c: Improve l2c310_of_parse() error message   Russell King - ARM Linux
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Russell King - ARM Linux
• [PATCHv3 2/5] arm64: Add AArch32 instruction set condition code checks   Russell King - ARM Linux
• [PATCH] tracing/syscalls: ignore numbers outside NR_syscalls' range   Russell King - ARM Linux
• [PATCH] tracing/syscalls: ignore numbers outside NR_syscalls' range   Russell King - ARM Linux
• [PATCH] tracing/syscalls: ignore numbers outside NR_syscalls' range   Russell King - ARM Linux
• [PATCH] ARM: decompressor: ensure I-side picks up relocated code   Russell King - ARM Linux
• [PATCH v3 2/6] uio: Add new UIO_MEM_PHYS_CACHE type for mem regions   Russell King - ARM Linux
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Russell King - ARM Linux
• [PATCH 1/3] ARM: Add default SPARSEMEM settings   Russell King - ARM Linux
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Russell King - ARM Linux
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Russell King - ARM Linux
• [RFT v2 01/24] irqdomain: Introduce new interfaces to support hierarchy irqdomains   Jiang Liu
• [RFT v2 01/24] irqdomain: Introduce new interfaces to support hierarchy irqdomains   Jiang Liu
• [PATCH v3 1/7] irqdomain: Fix irq_domain_alloc_irqs return check.   Jiang Liu
• [RFT v2 01/24] irqdomain: Introduce new interfaces to support hierarchy irqdomains   Jiang Liu
• [Patch Part2 v3 00/24] Enable hierarchy irqdomian on x86 platforms   Jiang Liu
• [Patch Part2 v3 01/24] irqdomain: Introduce new interfaces to support hierarchy irqdomains   Jiang Liu
• [Patch Part2 v3 02/24] genirq: Introduce helper functions to support stacked irq_chip   Jiang Liu
• [Patch Part2 v3 03/24] x86, irq: Save destination CPU ID in irq_cfg   Jiang Liu
• [Patch Part2 v3 04/24] x86, irq: Use hierarchy irqdomain to manage CPU interrupt vectors   Jiang Liu
• [Patch Part2 v3 05/24] x86, hpet: Use new irqdomain interfaces to allocate/free IRQ   Jiang Liu
• [Patch Part2 v3 06/24] x86, MSI: Use new irqdomain interfaces to allocate/free IRQ   Jiang Liu
• [Patch Part2 v3 07/24] x86, uv: Use new irqdomain interfaces to allocate/free IRQ   Jiang Liu
• [Patch Part2 v3 08/24] x86, htirq: Use new irqdomain interfaces to allocate/free IRQ   Jiang Liu
• [Patch Part2 v3 09/24] x86, dmar: Use new irqdomain interfaces to allocate/free IRQ   Jiang Liu
• [Patch Part2 v3 10/24] x86: irq_remapping: Introduce new interfaces to support hierarchy irqdomain   Jiang Liu
• [Patch Part2 v3 11/24] iommu/vt-d: Change prototypes to prepare for enabling hierarchy irqdomain   Jiang Liu
• [Patch Part2 v3 12/24] iommu/vt-d: Enhance Intel IR driver to suppport hierarchy irqdomain   Jiang Liu
• [Patch Part2 v3 13/24] iommu/amd: Enhance AMD IR driver to suppport hierarchy irqdomain   Jiang Liu
• [Patch Part2 v3 14/24] x86, hpet: Enhance HPET IRQ to support hierarchy irqdomain   Jiang Liu
• [Patch Part2 v3 15/24] x86, MSI: Use hierarchy irqdomain to manage MSI interrupts   Jiang Liu
• [Patch Part2 v3 16/24] x86, irq: Directly call native_compose_msi_msg() for DMAR IRQ   Jiang Liu
• [Patch Part2 v3 17/24] iommu/vt-d: Clean up unused MSI related code   Jiang Liu
• [Patch Part2 v3 18/24] iommu/amd: Clean up unused MSI related code   Jiang Liu
• [Patch Part2 v3 19/24] x86: irq_remapping: Clean up unused MSI related code   Jiang Liu
• [Patch Part2 v3 20/24] x86, irq: Clean up unused MSI related code and interfaces   Jiang Liu
• [Patch Part2 v3 21/24] iommu/vt-d: Refine the interfaces to create IRQ for DMAR unit   Jiang Liu
• [Patch Part2 v3 22/24] x86, irq: Use hierarchy irqdomain to manage DMAR interrupts   Jiang Liu
• [Patch Part2 v3 23/24] x86, htirq: Use hierarchy irqdomain to manage Hypertransport interrupts   Jiang Liu
• [Patch Part2 v3 24/24] x86, uv: Use hierarchy irqdomain to manage UV interrupts   Jiang Liu
• [Patch Part2 v3 15/24] x86, MSI: Use hierarchy irqdomain to manage MSI interrupts   Jiang Liu
• [Patch Part2 v3 15/24] x86, MSI: Use hierarchy irqdomain to manage MSI interrupts   Jiang Liu
• [Patch Part2 v3 15/24] x86, MSI: Use hierarchy irqdomain to manage MSI interrupts   Jiang Liu
• [PATCH] serial: of-serial: add PM suspend/resume support   Joseph Lo
• [PATCHv2] serial: of-serial: fix up PM ops on no_console_suspend and port type   Joseph Lo
• [PATCHv4] serial: of-serial: fix up PM ops on no_console_suspend and port type   Joseph Lo
• [PATCHv4] serial: of-serial: fix up PM ops on no_console_suspend and port type   Joseph Lo
• [PATCHv4] serial: of-serial: fix up PM ops on no_console_suspend and port type   Joseph Lo
• [PATCHv5] serial: of-serial: fix up PM ops on no_console_suspend and port type   Joseph Lo
• Where is DRAM initialisation done?   Stuart Longland
• Where is DRAM initialisation done?   Stuart Longland
• Where is DRAM initialisation done? [Resolved]   Stuart Longland
• [PATCH v5 07/11] mmc: sdio: Convert to dev_pm_domain_attach|detach()   Aaron Lu
• [PATCH] serial: of-serial: add PM suspend/resume support   Jingchang Lu
• [PATCH] serial: of-serial: fix up PM ops on no_console_suspend   Jingchang Lu
• [PATCH] serial: of-serial: fix up PM ops on no_console_suspend   Jingchang Lu
• [PATCHv5] clk: ppc-corenet: rename to qoriq and add CLK_OF_DECLARE support   Jingchang Lu
• [PATCH] serial: of-serial: fix up PM ops on no_console_suspend   Jingchang Lu
• [PATCHv2] serial: of-serial: fix up PM ops on no_console_suspend and port type   Jingchang Lu
• [PATCHv3] serial: of-serial: fix up PM ops on no_console_suspend and port type   Jingchang Lu
• [PATCHv5 0/6] ARM: imx: Add Freescale LS1021A SoC and board support   Jingchang Lu
• [PATCHv5 1/6] ARM: dts: Add SoC level device tree support for LS1021A   Jingchang Lu
• [PATCHv5 2/6] ARM: dts: Add initial LS1021A QDS board dts support   Jingchang Lu
• [PATCHv5 3/6] ARM: dts: Add initial LS1021A TWR board dts support   Jingchang Lu
• [PATCHv5 4/6] dt-bindings: arm: add Freescale LS1021A SoC device tree binding   Jingchang Lu
• [PATCHv5 5/6] ARM: imx: Add initial support for Freescale LS1021A   Jingchang Lu
• [PATCHv5 6/6] ARM: imx: Add Freescale LS1021A SMP support   Jingchang Lu
• [PATCHv2] serial: of-serial: fix up PM ops on no_console_suspend and port type   Jingchang Lu
• [PATCHv4] serial: of-serial: fix up PM ops on no_console_suspend and port type   Jingchang Lu
• [PATCHv5] clk: ppc-corenet: rename to qoriq and add CLK_OF_DECLARE support   Jingchang Lu
• [PATCHv5] serial: of-serial: fix up PM ops on no_console_suspend and port type   Jingchang Lu
• [PATCHv4] serial: of-serial: fix up PM ops on no_console_suspend and port type   Jingchang Lu
• [PATCHv4] serial: of-serial: fix up PM ops on no_console_suspend and port type   Jingchang Lu
• [PATCHv4] serial: of-serial: fix up PM ops on no_console_suspend and port type   Jingchang Lu
• [PATCHv5 6/6] ARM: imx: Add Freescale LS1021A SMP support   Jingchang Lu
• [PATCHv5 6/6] ARM: imx: Add Freescale LS1021A SMP support   Jingchang Lu
• [PATCHv5 1/6] ARM: dts: Add SoC level device tree support for LS1021A   Jingchang Lu
• [PATCH] serial: of-serial: fix uninitialized kmalloc variable   Jingchang Lu
• [PATCHv4] dmaengine: fsl-edma: fixup reg offset and hw S/G support in big-endian model   Jingchang Lu
• [PATCH] serial: fsl-lpuart: add lpuart32 power management support   Jingchang Lu
• [PATCHv6 0/6] ARM: imx: Add Freescale LS1021A SoC and board support   Jingchang Lu
• [PATCHv6 1/6] ARM: dts: Add SoC level device tree support for LS1021A   Jingchang Lu
• [PATCHv6 2/6] ARM: dts: Add initial LS1021A QDS board dts support   Jingchang Lu
• [PATCHv6 3/6] ARM: dts: Add initial LS1021A TWR board dts support   Jingchang Lu
• [PATCHv5 RESEND 4/6] dt-bindings: arm: add Freescale LS1021A SoC device tree binding   Jingchang Lu
• [PATCHv5 RESEND 5/6] ARM: imx: Add initial support for Freescale LS1021A   Jingchang Lu
• [PATCHv6 6/6] ARM: imx: Add Freescale LS1021A SMP support   Jingchang Lu
• [PATCHv6 0/6] ARM: imx: Add Freescale LS1021A SoC and board support   Jingchang Lu
• [RESENDv5] serial: of-serial: fix up PM ops on no_console_suspend and port type   Jingchang Lu
• [RESENDv5] serial: of-serial: fix up PM ops on no_console_suspend and port type   Jingchang Lu
• [PATCHv7 0/6] ARM: imx: Add Freescale LS1021A SoC and board support   Jingchang Lu
• [RESENDv6 1/6] ARM: dts: Add SoC level device tree support for LS1021A   Jingchang Lu
• [PATCHv7 2/6] ARM: dts: Add initial LS1021A QDS board dts support   Jingchang Lu
• [PATCHv7 3/6] ARM: dts: Add initial LS1021A TWR board dts support   Jingchang Lu
• [RESENDv5 4/6] dt-bindings: arm: add Freescale LS1021A SoC device tree binding   Jingchang Lu
• [RESENDv5 5/6] ARM: imx: Add initial support for Freescale LS1021A   Jingchang Lu
• [RESENDv6 6/6] ARM: imx: Add Freescale LS1021A SMP support   Jingchang Lu
• [PATCH] arm: imx: clean up machine mxc_arch_reset_init_dt reset init   Jingchang Lu
• [PATCH 06/44] gpio-poweroff: Drop reference to pm_power_off from devicetree bindings   Andrew Lunn
• [PATCH 07/44] qnap-poweroff: Drop reference to pm_power_off from devicetree bindings   Andrew Lunn
• [PATCH 21/44] power/reset: gpio-poweroff: Register with kernel poweroff handler   Andrew Lunn
• [PATCH 23/44] power/reset: qnap-poweroff: Register with kernel poweroff handler   Andrew Lunn
• [PATCH 20/44] power/reset: restart-poweroff: Register with kernel poweroff handler   Andrew Lunn
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   Andrew Lunn
• Regarding tx-nocache-copy in the Sheevaplug   Andrew Lunn
• [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes   Andrew Lunn
• [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes   Andrew Lunn
• [PATCH 0/4] Make Armada 375 use the reference clock when possible   Andrew Lunn
• [PATCH 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC   Andrew Lunn
• [PATCH 0/4] Make Armada 375 use the reference clock when possible   Andrew Lunn
• [PATCH 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC   Andrew Lunn
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   Andrew Lunn
• [PATCH 12/17] ARM: mvebu: Armada XP GP specific suspend/resume code   Andrew Lunn
• Unconditional registering EMDA platform devices   Andrew Lunn
• [PATCH 12/17] ARM: mvebu: Armada XP GP specific suspend/resume code   Andrew Lunn
• [PATCH 06/17] gpio: mvebu: add suspend/resume support   Andrew Lunn
• [PATCHv0 1/2] arm: mvebu: fix LED color in NETGEAR ReadyNAS 102 .dts file   Andrew Lunn
• [PATCHv0 2/2] arm: mvebu: clarify (e)SATA ports info in NETGEAR ReadyNAS 102 .dts file   Andrew Lunn
• [PATCHv0] arm: mvebu: enable rear eSATA ports of NETGEAR ReadyNAS 2120   Andrew Lunn
• [PATCHv0] arm: mvebu: add .dts file for Synology DS213j   Andrew Lunn
• [PATCHv0] arm: mvebu: add .dts file for Synology DS213j   Andrew Lunn
• [PATCH 12/17] ARM: mvebu: Armada XP GP specific suspend/resume code   Andrew Lunn
• [PATCH 12/17] ARM: mvebu: Armada XP GP specific suspend/resume code   Andrew Lunn
• [PATCH 12/17] ARM: mvebu: Armada XP GP specific suspend/resume code   Andrew Lunn
• [PATCH 0/6] ASoC/ARM: move Marvell Armada 370 DB to simple-audio-card   Andrew Lunn
• [PATCH] leds: leds-gpio: Convert gpio_blink_set() to use GPIO descriptors   Andrew Lunn
• [PATCH 3/3] arm64: Add Juno SoC device tree.   Andrew Lunn
• [PATCH 0/4] Support for DLINK DIR665   Andrew Lunn
• [PATCH 1/4] ARM: Kirkwood: Add support for DLink DIR665   Andrew Lunn
• [PATCH 2/4] ARM: Kirkwood: DIR665: Instantiate Distributed Switch Architecture   Andrew Lunn
• [PATCH 3/4] ARM: mvebu: Add DLINK DIR665 options to mvebu_v5_defconfig   Andrew Lunn
• [PATCH 4/4] ARM: config: Add DLINK DIR665 options to multi_v5_defconfig   Andrew Lunn
• RCU bug with v3.17-rc3 ?   Nathan Lynch
• RCU bug with v3.17-rc3 ?   Nathan Lynch
• [PATCH 1/2] socfpga: hotplug: put cpu1 in wfi   Pavel Machek
• [PATCH 2/2] socfpga: support suspend to ram   Pavel Machek
• [PATCH 1/2] socfpga: hotplug: put cpu1 in wfi   Pavel Machek
• [PATCH 1/2] socfpga: hotplug: put cpu1 in wfi   Pavel Machek
• [PATCH v5 3/4] ARM: tegra: Add thermal trip points for Jetson TK1   Pavel Machek
• [PATCH v2 1/2] socfpga: hotplug: put cpu1 in wfi   Pavel Machek
• [PATCH v2 2/2] socfpga: support suspend to ram   Pavel Machek
• socfpga ethernet problems with ethernet in 3.17 with u-boot-2013.01.01   Pavel Machek
• [PATCH 01/44] kernel: Add support for poweroff handler call chain   Pavel Machek
• [PATCH 03/44] hibernate: Call have_kernel_poweroff instead of checking pm_power_off   Pavel Machek
• [PATCH v3 1/2] socfpga: hotplug: put cpu1 in wfi   Pavel Machek
• [PATCH v3 2/2] socfpga: support suspend to ram   Pavel Machek
• [PATCH 1/8] power_supply: Add API for safe access of power supply function attrs   Pavel Machek
• [PATCH 2/8] power_supply: sysfs: Use power_supply_*() API for accessing function attrs   Pavel Machek
• [PATCH 3/8] power: 88pm860x_charger: Use power_supply_*() API for accessing function attrs   Pavel Machek
• [PATCH 0/8] power_supply: Add API for safe access of get_property-like function attrs   Pavel Machek
• [PATCH 0/7] power_supply: Decrement the device reference counter   Pavel Machek
• [PATCH 2/8] power_supply: sysfs: Use power_supply_*() API for accessing function attrs   Pavel Machek
• USB Ethernet gadget on Nokia n900   Pavel Machek
• USB Ethernet gadget on Nokia n900   Pavel Machek
• USB Ethernet gadget on Nokia n900   Pavel Machek
• USB Ethernet gadget on Nokia n900   Pavel Machek
• USB Ethernet gadget on Nokia n900   Pavel Machek
• USB Ethernet gadget on Nokia n900   Pavel Machek
• USB Ethernet gadget on Nokia n900   Pavel Machek
• USB Ethernet gadget on Nokia n900   Pavel Machek
• USB Ethernet gadget on Nokia n900   Pavel Machek
• [PATCH v2 0/5] Add Spreadtrum Sharkl Platform support   Pavel Machek
• USB Ethernet gadget on Nokia n900   Pavel Machek
• USB Ethernet gadget on Nokia n900   Pavel Machek
• USB Ethernet gadget on Nokia n900   Pavel Machek
• USB Ethernet gadget on Nokia n900   Pavel Machek
• USB Ethernet gadget on Nokia n900   Pavel Machek
• USB Ethernet gadget on Nokia n900   Pavel Machek
• USB Ethernet gadget on Nokia n900   Pavel Machek
• Nokia n900 problems in 3.18-rc1 (was Re: USB Ethernet gadget on Nokia n900)   Pavel Machek
• Nokia n900 problems in 3.18-rc1 (was Re: USB Ethernet gadget on Nokia n900)   Pavel Machek
• [PATCH] PM / Domains: Change prototype for the ->attach_dev() callback   Pavel Machek
• Nokia n900 problems in 3.18-rc1 (was Re: USB Ethernet gadget on Nokia n900)   Pavel Machek
• [PATCH 00/21] thermal: exynos: Thermal code rework to use device tree   Lukasz Majewski
• [PATCH 01/21] thermal: of: Extend of-thermal.c to provide number of trip points   Lukasz Majewski
• [PATCH 02/21] thermal: of: Extend of-thermal.c to provide check if trip point is enabled   Lukasz Majewski
• [PATCH 03/21] thermal: of: Extend of-thermal.c to provide number of non critical trip points   Lukasz Majewski
• [PATCH 04/21] thermal: of: Extend current of-thermal.c code to allow setting emulated temp   Lukasz Majewski
• [PATCH 05/21] thermal: exynos: cosmetic: Correct comment format   Lukasz Majewski
• [PATCH 06/21] thermal: exynos: Provide thermal_exynos.h file to be included in device tree files   Lukasz Majewski
• [PATCH 07/21] thermal: dts: trats: Enable TMU on the Exynos4210 trats device   Lukasz Majewski
• [PATCH 08/21] thermal: dts: exynos: Adding LD010 regulator node necessary for TMU on Odroid U3 board   Lukasz Majewski
• [PATCH 09/21] thermal: dts: Provide bindings and enable TMU at Exynos4x12 devices   Lukasz Majewski
• [PATCH 10/21] thermal: cpu_cooling: dts: Define device tree bindings for Exynos cpu cooling functionality   Lukasz Majewski
• [PATCH 11/21] thermal: cpu_cooling: Modify exynos thermal code to use device tree for cpu cooling configuration   Lukasz Majewski
• [PATCH 12/21] thermal: exynos: dts: Add default definition for the TMU sensor   Lukasz Majewski
• [PATCH 13/21] thermal: dts: Default trip points definition for Exynos5420 SoCs   Lukasz Majewski
• [PATCH 14/21] thermal: exynos: dts: Define default thermal-zones for Exynos4   Lukasz Majewski
• [PATCH 15/21] thermal: dts: exynos: Trip points and sensor configuration data for Exynos5440   Lukasz Majewski
• [PATCH 16/21] thermal: exynos: dts: Provide device tree bindings identical to one in exynos_tmu_data.c   Lukasz Majewski
• [PATCH 17/21] thermal: samsung: core: Exynos TMU rework to use device tree for configuration   Lukasz Majewski
• [PATCH 18/21] thermal: exynos: Remove exynos_thermal_common.[c|h] files   Lukasz Majewski
• [PATCH 19/21] thermal: exynos: Remove exynos_tmu_data.c file   Lukasz Majewski
• [PATCH 20/21] thermal: exynos: Make Exynos5250 TMU compatible with Exynos4412   Lukasz Majewski
• [PATCH 21/21] thermal: exynos: Make Exynos3250 TMU compatible with Exynos4412   Lukasz Majewski
• [PATCH 21/21] thermal: exynos: Make Exynos3250 TMU compatible with Exynos4412   Lukasz Majewski
• [PATCH 00/21] thermal: exynos: Thermal code rework to use device tree   Lukasz Majewski
• [PATCH 0/3] input: tsc2007: Extend for pre-calibration, flipping and rotation   Belisko Marek
• [PATCH] kbuild: arm: Do not define "comma" twice   Michal Marek
• [PATCH] IXP4xx: Makefile cleanup   Michal Marek
• [PATCH] arm64: Use and error-check DMA_ERROR_CODE   Catalin Marinas
• [PATCH V4 1/6] mm: Introduce a general RCU get_user_pages_fast.   Catalin Marinas
• [PATCH 2/6] arm64: Add DTS support for Spreadtrum's Shark64 SoC   Catalin Marinas
• [PATCH 08/24] Allow a 32bit ABI to use the naming of the 64bit ABI syscalls to avoid confusion of not splitting the registers   Catalin Marinas
• [PATCH 09/24] ARM64:ILP32: Use the same syscall names as LP64   Catalin Marinas
• [PATCH 13/24] ARM64:ILP32: Use the non compat HWCAP for ILP32   Catalin Marinas
• [PATCH 16/24] ARM64:ILP32: Support core dump for ILP32   Catalin Marinas
• [PATCH 18/24] ARM64: Add vdso for ILP32 and use it for the signal return   Catalin Marinas
• [PATCH v2] arm64: Use DMA_ERROR_CODE to denote failed allocation   Catalin Marinas
• [PATCH 08/24] Allow a 32bit ABI to use the naming of the 64bit ABI syscalls to avoid confusion of not splitting the registers   Catalin Marinas
• [PATCH 18/24] ARM64: Add vdso for ILP32 and use it for the signal return   Catalin Marinas
• [PATCH 19/24] ptrace: Allow compat to use the native siginfo   Catalin Marinas
• [PATCH 21/24] ARM64:ILP32: Use a seperate syscall table as a few syscalls need to be using the compat syscalls   Catalin Marinas
• [PATCH 21/24] ARM64:ILP32: Use a seperate syscall table as a few syscalls need to be using the compat syscalls   Catalin Marinas
• [PATCHv3 00/24] ILP32 support in ARM64   Catalin Marinas
• [RFC PATCH 05/16] arm64: support poweroff through poweroff handler call chain   Catalin Marinas
• [PATCH] arm64: optimize memcpy_{from,to}io() and memset_io()   Catalin Marinas
• [PATCHv4] arm64: dmi: Add SMBIOS/DMI support   Catalin Marinas
• [PATCH 1/2] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Catalin Marinas
• [PATCH 2/2] arm/arm64: KVM: Ensure memslots are within KVM_PHYS_SIZE   Catalin Marinas
• [PATCH v2 0/3] arm/arm64: KVM: Host 48-bit VA support and IPA limits   Catalin Marinas
• [PATCH v2 1/3] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Catalin Marinas
• [GIT PULL] arm64 patches for 3.18   Catalin Marinas
• [PATCH v2 1/3] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Catalin Marinas
• [PATCH] arm64: optimize memcpy_{from,to}io() and memset_io()   Catalin Marinas
• [PATCH 12/44] mfd: ab8500-sysctrl: Register with kernel poweroff handler   Catalin Marinas
• [PATCH 32/44] arm64: psci: Register with kernel poweroff handler   Catalin Marinas
• [PATCH v2 1/3] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Catalin Marinas
• [PATCH v3 1/3] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Catalin Marinas
• [PATCH v3 2/3] arm/arm64: KVM: Ensure memslots are within KVM_PHYS_SIZE   Catalin Marinas
• [PATCH v3 3/3] arm64: Allow 48-bits VA space without ARM_SMMU   Catalin Marinas
• [PATCH] arm64: compat: fix compat types affecting struct compat_elf_prpsinfo   Catalin Marinas
• [PATCH] arm64: compat: fix compat types affecting struct compat_elf_prpsinfo   Catalin Marinas
• [PATCH 2/2] ARM64: Add printf annotation to early_print   Catalin Marinas
• [PATCH] arm64: compat: fix compat types affecting struct compat_elf_prpsinfo   Catalin Marinas
• [PATCH] arm64: compat: fix compat types affecting struct compat_elf_prpsinfo   Catalin Marinas
• [PATCH] arm64: compat: fix compat types affecting struct compat_elf_prpsinfo   Catalin Marinas
• where/how arm start first jump from svc to user in kernel   Catalin Marinas
• [PATCH] arm64/efi: set PE/COFF file alignment to 512 bytes   Catalin Marinas
• [PATCH v2] arm64: mm: use macro instead of if judgement of ZONE_DMA   Catalin Marinas
• [PATCH v2] arm64: mm: use macro instead of if judgement of ZONE_DMA   Catalin Marinas
• [PATCH] arm64: mm: Correct fixmap pagetable types   Catalin Marinas
• [PATCH] arm64: optimize memcpy_{from,to}io() and memset_io()   Catalin Marinas
• [PATCH] arm64: Fix compile error seen in non-SMP builds   Catalin Marinas
• [PATCH v2 36/47] arm64: psci: Register with kernel poweroff handler   Catalin Marinas
• [PATCH] arm64/crypto: use crypto instructions for generating AES key schedule   Catalin Marinas
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   Catalin Marinas
• [PATCH] arm64/crypto: use crypto instructions for generating AES key schedule   Catalin Marinas
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   Catalin Marinas
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   Catalin Marinas
• [PATCH 1/2] arm: hwcap: add new hwcap for identifying PXN bits   Catalin Marinas
• BPF crash with 3.18-rc1 on arm64 Juno hardware   Catalin Marinas
• [PATCH v4 3/7] [RFC] arm/arm64: introduce is_dma_coherent   Catalin Marinas
• [PATCH v4 3/7] [RFC] arm/arm64: introduce is_dma_coherent   Catalin Marinas
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   Catalin Marinas
• [GIT PULL] arm64 fixes for 3.18   Catalin Marinas
• [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes   Benoit Masson
• [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes   Benoit Masson
• [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes   Benoit Masson
• [PATCH 0/8] Armada XP pinctrl consolidation and ix4-300d fixes   Benoit Masson
• [PATCH 2/2] ARM: BCM5301X: Add LEDs for Netgear R6250 V1   Hauke Mehrtens
• [GIT PULL 0/8] perf/core improvements and fixes   Arnaldo Carvalho de Melo
• [PATCH 7/8] perf tools: Fix build breakage on arm64 targets   Arnaldo Carvalho de Melo
• [PATCH 2/2] regulator: twl: use platform data in the DT based boot also   Nishanth Menon
• [REPOST PATCH 0/2] ARM: OMAP3+: VCVP mapping fixes to get DVFS working   Nishanth Menon
• [PATCH] MAINTAINERS: Update entry for omap related .dts files to cover new SoCs   Nishanth Menon
• [PATCH 0/3] ARM: dts: dra72-evm: Add MMC PMIC button information   Nishanth Menon
• [PATCH 1/3] ARM: dts: dra72-evm: Provide explicit pinmux for TPS PMIC   Nishanth Menon
• [PATCH 2/3] ARM: dts: dra72-evm: Add power button node   Nishanth Menon
• [PATCH 3/3] ARM: dts: dra72-evm: Add MMC nodes   Nishanth Menon
• [PATCH V2 3/3] ARM: dts: dra72-evm: Add MMC nodes   Nishanth Menon
• [PATCH] ARM: dts: dra7-evm: Keep all VDD rails always-on   Nishanth Menon
• [PATCH] ARM: DRA7: hwmod data: Add missing UART hwmod data   Nishanth Menon
• [PATCH] ARM: dts: DRA7: Add aliases for all serial ports   Nishanth Menon
• [PATCH] tty: serial: omap: increase max consoles to 10   Nishanth Menon
• [PATCH 1/4] ARM: dts: dra72-evm: Add NAND support   Nishanth Menon
• [PATCH 1/4] ARM: dts: dra72-evm: Add NAND support   Nishanth Menon
• [PATCH 1/4] ARM: dts: dra72-evm: Add NAND support   Nishanth Menon
• [PATCH] ARM: dts: DRA7: Add aliases for all serial ports   Nishanth Menon
• [PATCH 0/2] ARM: OMAP4+: PM: centralize static dependency mapping table   Nishanth Menon
• [PATCH 1/2] ARM: OMAP4: PM: Only do static dependency configuration in omap4_init_static_deps   Nishanth Menon
• [PATCH 2/2] ARM: OMAP4+: PM: Centralize static dependency mapping table   Nishanth Menon
• [PATCH] ARM: OMAP4+: PM: Program CPU logic power state   Nishanth Menon
• [PATCH] tty: serial: omap: increase max consoles to 10   Nishanth Menon
• [PATCH V2] tty: serial: omap: Increase max consoles and add check to prevent crash   Nishanth Menon
• [PATCH V3 3/3] rtc: omap: Support regulator supply for RTC   Nishanth Menon
• [PATCH V3 3/3] rtc: omap: Support regulator supply for RTC   Nishanth Menon
• [PATCH V4 3/3] rtc: omap: Support regulator supply for RTC   Nishanth Menon
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Nishanth Menon
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Nishanth Menon
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Nishanth Menon
• [PATCH 2/3] arm: mach-omap2: omap_hwmod_43xx_data: add hwmod support for tscadc on am43x-evm   Nishanth Menon
• [PATCH 3/3] arm: boot: dts: am4372: add tscadc DT entries for am437x-evm and am43x-epos-evm   Nishanth Menon
• [PATCH] mtd: nand: gpmi: add proper raw access support   Iwo Mergler
• [PATCH v3 0/3] mtd: nand: gpmi: add proper raw access support   Iwo Mergler
• [PATCH v3 0/3] mtd: nand: gpmi: add proper raw access support   Iwo Mergler
• [PATCH v2] net: ll_temac: Remove unnecessary ether_setup after alloc_etherdev   David Miller
• [PATCH 0/2] net: spider_net: fix possible bitops errors   David Miller
• [PATCH RESEND] net: pxa168_eth: avoid using signed char for bitops   David Miller
• [PATCH v3 0/6] Add 10GbE support to APM X-Gene SoC ethernet driver   David Miller
• [PATCH v4 0/6] Add 10GbE support to APM X-Gene SoC ethernet driver   David Miller
• [PATCH V4 1/6] mm: Introduce a general RCU get_user_pages_fast.   David Miller
• [PATCH V4 1/6] mm: Introduce a general RCU get_user_pages_fast.   David Miller
• [PATCH V4 1/6] mm: Introduce a general RCU get_user_pages_fast.   David Miller
• [PATCH v2 0/4] Add SGMII based 1GbE support to APM X-Gene SoC ethernet driver   David Miller
• [PATCH v3 25/27] Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq   David Miller
• [PATCH v2 0/9] Marvell PXA168 libphy handling and Berlin Ethernet   David Miller
• [PATCH] fixup! net: pxa168_eth: Provide phy_interface mode on platform_data   David Miller
• net: fec: fix regression on i.MX28 introduced by rx_copybreak support   David Miller
• net: fec: fix regression on i.MX28 introduced by rx_copybreak support   David Miller
• [PATCH v4] PCI: Layerscape: Add Layerscape PCIe driver   Lian Minghuan-B31939
• [PATCH 1/2] ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file   Rafał Miłecki
• [PATCH 2/2] ARM: BCM5301X: Add LEDs for Netgear R6250 V1   Rafał Miłecki
• [PATCH 1/2] mtd: m25p80: get rid of spi_get_device_id   Rafał Miłecki
• [PATCH] ARM: don't set unused name in struct flash_platform_data   Rafał Miłecki
• [PATCH] ARM: don't set unused name in struct flash_platform_data   Rafał Miłecki
• [PATCH] arm: dts: add initial support for TBS2910 Matrix ARM mini PC   Soeren Moch
• [PATCH v2] arm: dts: add initial support for TBS2910 Matrix ARM mini PC   Soeren Moch
• [PATCH v2] arm: dts: add initial support for TBS2910 Matrix ARM mini PC   Soeren Moch
• add initial support for TBS2910 Matrix ARM mini PC   Soeren Moch
• [PATCH v3 1/2] devicetree: bindings: Add vendor prefix for TBS Technologies   Soeren Moch
• [PATCH v3 2/2] ARM: dts: add initial support for TBS2910 Matrix ARM mini PC   Soeren Moch
• [PATCH v4 0/2] add initial support for TBS2910 Matrix ARM mini PC   Soeren Moch
• [PATCH v4 1/2] devicetree: bindings: Add vendor prefix for TBS Technologies   Soeren Moch
• [PATCH v4 2/2] ARM: dts: add initial support for TBS2910 Matrix ARM mini PC   Soeren Moch
• [PATCH] arm: dts: add initial support for TBS2910 Matrix ARM mini PC   Sören Moch
• [GIT PULL 0/8] perf/core improvements and fixes   Ingo Molnar
• [PATCH] tracing/syscalls: ignore numbers outside NR_syscalls' range   Ingo Molnar
• [PATCH] [RFC] ARM: shmobile: Add early debugging support using SCIF(A)   Ian Molton
• iMX6 sdma firmware error "imx/sdma/sdma-imx6q.bin"   Anand Moon
• [PATCH][resend] of: Add vendor 2nd prefix for Asahi Kasei Corp   Kuninori Morimoto
• [PATCH/RFC] ARM: shmobile: r8a7790: Add SDHI clock rate to device tree   Kuninori Morimoto
• [PATCH] Route keyboard LEDs through the generic LEDs layer.   Andrew Morton
• [PATCH] gcov: add ARM64 to GCOV_PROFILE_ALL   Andrew Morton
• [PATCH v3] rtc: omap: add support for pmic_power_en   Andrew Morton
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Andrew Morton
• [PATCH v3] rtc: omap: add support for pmic_power_en   Andrew Morton
• [PATCH v3] rtc: omap: add support for pmic_power_en   Andrew Morton
• [PATCH 1/3] iommu/arm-smmu: change IOMMU_EXEC to IOMMU_NOEXEC   Antonios Motakis
• [PATCH 3/3] iommu/arm-smmu: add IOMMU_CAP_NOEXEC to the ARM SMMU driver   Antonios Motakis
• CPSW bug with AM437x SK   Mugunthan V N
• hrtimer timer firing behavior on multicore ARM processor   Murali N
• [PATCH v6 0/7] ARM: kprobes: enable OPTPROBES for ARM 32.   Wang Nan
• [PATCH v6 1/7] ARM: kprobes: replace 'union decode_action' to 'struct decode_action'   Wang Nan
• [PATCH v6 2/7] ARM: kprobes: seprates load and store actions   Wang Nan
• [PATCH v6 3/7] ARM: kprobes: introduces checker   Wang Nan
• [PATCH v6 4/7] ARM: kprobes: collects stack consumption for store instructions   Wang Nan
• [PATCH v6 5/7] ARM: kprobes: disallow probing stack consuming instructions   Wang Nan
• [PATCH v6 6/7] kprobes: copy ainsn after alloc aggr kprobe   Wang Nan
• [PATCH v6 7/7] ARM: kprobes: enable OPTPROBES for ARM 32   Wang Nan
• [PATCH 0/4] ARM: kprobes: introduces instruction checker.   Wang Nan
• [PATCH 1/4] ARM: kprobes: seprates load and store actions   Wang Nan
• [PATCH 2/4] ARM: kprobes: introduces checker   Wang Nan
• [PATCH 3/4] ARM: kprobes: collects stack consumption for store instructions   Wang Nan
• [PATCH 4/4] ARM: kprobes: disallow probing stack consuming instructions   Wang Nan
• [PATCH v7 0/2] ARM: kprobes: enable OPTPROBES for ARM 32.   Wang Nan
• [PATCH v7 1/2] kprobes: copy ainsn after alloc aggr kprobe   Wang Nan
• [PATCH v7 2/2] ARM: kprobes: enable OPTPROBES for ARM 32   Wang Nan
• [PATCH v6 0/7] ARM: kprobes: enable OPTPROBES for ARM 32.   Wang Nan
• [PATCH v2 2/4] ARM: exynos: Ensure PM domains are powered at initialization   Sylwester Nawrocki
• [PATCH v2 1/4] PM / Domains: Remove pm_genpd_dev_need_restore() API   Sylwester Nawrocki
• [PATCH v2 1/4] PM / Domains: Remove pm_genpd_dev_need_restore() API   Sylwester Nawrocki
• [PATCH v2 1/4] PM / Domains: Remove pm_genpd_dev_need_restore() API   Sylwester Nawrocki
• [PATCH] ASoC: samsung: fix CDCLK handling   Sylwester Nawrocki
• [PATCH] ASoC: samsung: fix CDCLK handling   Sylwester Nawrocki
• [PATCH 3/4] [media] Remove optional dependency on PLAT_S5P   Sylwester Nawrocki
• [PATCH 2/4] [media] exynos4-is: Remove optional dependency on PLAT_S5P   Sylwester Nawrocki
• [PATCH] [media] Remove references to non-existent PLAT_S5P symbol   Sylwester Nawrocki
• [PATCH] [media] Remove references to non-existent PLAT_S5P symbol   Sylwester Nawrocki
• [PATCH v2] [media] Remove references to non-existent PLAT_S5P symbol   Sylwester Nawrocki
• [PATCH] ARM: dts: Specify Odroid X2/U3 audio clock parents and rates   Sylwester Nawrocki
• [PATCH v2] [media] Remove references to non-existent PLAT_S5P symbol   Sylwester Nawrocki
• [PATCH v2 0/3] Some cleanup for samsung clock   Sylwester Nawrocki
• [PATCH 3/5] clk: samsung: Document binding for Exynos4415 clock controller   Sylwester Nawrocki
• [PATCH 2/5] clk: samsung: exynos4415: Add clocks using common clock framework   Sylwester Nawrocki
• [PATCH 2/5] clk: samsung: exynos4415: Add clocks using common clock framework   Sylwester Nawrocki
• [PATCH v2 3/7] clk: samsung: exynos7: add clocks for RTC block   Sylwester Nawrocki
• [PATCH v5 0/8] arch: arm64: Enable support for Samsung Exynos7 SoC   Sylwester Nawrocki
• [PATCH] ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi   Sylwester Nawrocki
• [GIT PULL] Samsung clock changes for 3.19   Sylwester Nawrocki
• [PATCH 1/4] mm: cma: Don't crash on allocation if CMA area can't be activated   Michal Nazarewicz
• [PATCH 2/4] mm: cma: Always consider a 0 base address reservation as dynamic   Michal Nazarewicz
• [PATCH 4/4] mm: cma: Use %pa to print physical addresses   Michal Nazarewicz
• [PATCH v2 3/4] mm: cma: Ensure that reservations never cross the low/high mem boundary   Michal Nazarewicz
• [PATCH 1/4] mm: cma: Don't crash on allocation if CMA area can't be activated   Michal Nazarewicz
• [BISECT] v3.18-rc1 doesn't boot on nitrogen6x i.MX6 board   Eric Nelson
• [BISECT] v3.18-rc1 doesn't boot on nitrogen6x i.MX6 board   Eric Nelson
• [PATCH 2/2] ARM: dts: imx6qdl-rex: Remove unneeded 'fsl, mode' property   Robert Nelson
• [PATCH] ARM: dts: am335x-boneblack: set dcdc1 regulator for 1.35v ddr3   Robert Nelson
• [PATCH 1/2] socfpga: hotplug: put cpu1 in wfi   Dinh Nguyen
• [PATCH 1/2] socfpga: hotplug: put cpu1 in wfi   Dinh Nguyen
• [PATCH] arm: socfpga: fix fetching cpu1start_addr for system with > 2GB of ram   Dinh Nguyen
• [PATCH] arm: socfpga: fix fetching cpu1start_addr for system with > 2GB of ram   Dinh Nguyen
• [PATCHv2] arm: socfpga: fix fetching cpu1start_addr for system with > 2GB of ram   Dinh Nguyen
• socfpga ethernet problems with ethernet in 3.17 with u-boot-2013.01.01   Dinh Nguyen
• [PATCH v3 3/5] ARM: dts: sun9i: Add A80 Optimus Board support   Dinh Nguyen
• [PATCHv3] arm: socfpga: fix fetching cpu1start_addr for SMP   Dinh Nguyen
• [PATCH v3 0/2] socfpga: fix hotplug/add suspend to ram   Dinh Nguyen
• [PATCH 2/2] ARM: dts: socfpga: Add a 3.3V fixed regulator node   Dinh Nguyen
• [PATCH 2/2] ARM: dts: socfpga: Add a 3.3V fixed regulator node   Dinh Nguyen
• [PATCH 2/2] ARM: dts: socfpga: Add a 3.3V fixed regulator node   Dinh Nguyen
• [PATCHv2 1/2] ARM: dts: socfpga: Fix SD card detect   Dinh Nguyen
• [PATCH 3/3] ARM: socfpga: enable INOTIFY_USER   Dinh Nguyen
• [PATCHv2 1/2] ARM: dts: socfpga: Fix SD card detect   Dinh Nguyen
• [PATCHv2 1/2] ARM: dts: socfpga: Fix SD card detect   Dinh Nguyen
• [PATCHv2 2/2] ARM: dts: socfpga: Add a 3.3V fixed regulator node   Dinh Nguyen
• [PATCHv3 1/2] ARM: dts: socfpga: Fix SD card detect   Dinh Nguyen
• [PATCHv3 1/2] ARM: dts: socfpga: Fix SD card detect   Dinh Nguyen
• [PATCH v3 2/2] socfpga: support suspend to ram   Dinh Nguyen
• [PATCH] ARM: socfpga_defconfig: Update defconfig for SoCFPGA   Dinh Nguyen
• [PATCH] [RFC] ARM: shmobile: Add early debugging support using SCIF(A)   Khiem Nguyen
• [PATCH] [RFC] ARM: shmobile: Add early debugging support using SCIF(A)   Khiem Nguyen
• [PATCH v2] MAINTAINERS: drop list entry for davinci   Sekhar Nori
• [PATCH 1/2] mtd: m25p80: get rid of spi_get_device_id   Brian Norris
• [PATCH v2 0/8] mtd: nand: Support for new DT NAND driver   Brian Norris
• [PATCH 5/9] mtd: nand: stm_nand_bch: provide Device Tree documentation   Brian Norris
• [PATCH 7/9] mtd: nand: stm_nand_bch: adding BBT header   Brian Norris
• [PATCH 8/9] mtd: nand: stm_nand_bch: add support for ST's BCH NAND controller   Brian Norris
• [PATCH 9/9] mtd: nand: stm_nand_bch: provide ST's implementation of Back Block Table   Brian Norris
• [PATCH 8/9] mtd: nand: stm_nand_bch: add support for ST's BCH NAND controller   Brian Norris
• [PATCH 0/2] mtd: nand: omap: Fix build with CONFIG_MTD_NAND_OMAP_BCH=m   Brian Norris
• [PATCH v2 1/5] m25p80,spi-nor: Fix module aliases for m25p80   Brian Norris
• [PATCH 0/5] m25p80,spi-nor: Fix module aliases for m25p80; clean up chip identification   Brian Norris
• [PATCH v2 5/5] m25p80,spi-nor: Share the list of supported chip type names again   Brian Norris
• [PATCH 8/9] mtd: nand: stm_nand_bch: add support for ST's BCH NAND controller   Brian Norris
• [PATCH v2 1/5] m25p80,spi-nor: Fix module aliases for m25p80   Brian Norris
• [PATCH 1/2] mtd: m25p80: get rid of spi_get_device_id   Brian Norris
• [PATCH 2/2] mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id   Brian Norris
• [PATCH v2 1/5] m25p80,spi-nor: Fix module aliases for m25p80   Brian Norris
• [PATCH v6 1/2] mtd: nand: add sunxi NAND flash controller support   Brian Norris
• [PATCH v6 2/2] mtd: nand: add sunxi NFC dt bindings doc   Brian Norris
• [PATCH] ARM: don't set unused name in struct flash_platform_data   Brian Norris
• [PATCH] ARM: don't set unused name in struct flash_platform_data   Brian Norris
• [PATCH v2 2/5] spi-nor: Remove spi_nor::read_id operation   Brian Norris
• [PATCH v7 1/2] mtd: nand: add sunxi NAND flash controller support   Brian Norris
• [PATCH 0/2] MAINTAINERS: brcmstb entry updates   Brian Norris
• [PATCH v7 1/2] mtd: nand: add sunxi NAND flash controller support   Brian Norris
• [PATCH 2/2 v2] SPI: spi-pxa2xx: SPI support for Intel Quark X1000   Bryan O'Donoghue
• [PATCH 2/2 v2] SPI: spi-pxa2xx: SPI support for Intel Quark X1000   Bryan O'Donoghue
• [PATCH 2/2 v3] SPI: spi-pxa2xx: SPI support for Intel Quark X1000   Bryan O'Donoghue
• [PATCH 1/2 v3] SPI: spi-pxa2xx: Add helpers for regiseters' accessing   Bryan O'Donoghue
• [PATCH] gcov: add ARM64 to GCOV_PROFILE_ALL   Peter Oberparleiter
• *** Gällande ditt Swedbank kreditkort ! *** 85jcojj10 ( linux-arm-kernel at lists.infradead.org )   Swedbank AB Online
• *** Your Money Transfer Control Number [MTCN] is: 590575410 *** 364kvmoo585 ( linux-arm-kernel at lists.infradead.org )   Western Union Online
• [PATCH V2] ARM: tegra: Re-add removed SoC id macro to tegra_resume()   Dmitry Osipenko
• [PATCH V2] ARM: tegra: Re-add removed SoC id macro to tegra_resume()   Dmitry Osipenko
• [PATCH V3] ARM: tegra: Re-add removed SoC id macro to tegra_resume()   Dmitry Osipenko
• [PATCH v3 22/27] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq   Sebastian Ott
• [PATCH v3 0/4] Correct vendor-prefix and document device isl29028   Darshana Padmadas
• [PATCH v3 1/4] Documentation: devicetree: bindings: Document correct and deprecated vendor-prefix with device isl29028   Darshana Padmadas
• [PATCH v3 2/4] Documentation: devicetree: bindings: Document deprecated device vendor name to fix related warning   Darshana Padmadas
• [PATCH v3 3/4] Staging: iio: light: Added correct vendor-prefix for device isl29028   Darshana Padmadas
• [PATCH v3 4/4] arch: arm: boot: dts: Added correct vendor-prefix with device name to compatible property   Darshana Padmadas
• [PATCH v4 0/4] Correct vendor-prefix and document device isl29028   Darshana Padmadas
• [PATCH v4 1/4] Documentation: devicetree: bindings: Document correct and deprecated vendor-prefix with device isl29028   Darshana Padmadas
• [PATCH v4 2/4] Documentation: devicetree: bindings: Document deprecated device vendor name to fix related warning   Darshana Padmadas
• [PATCH v4 3/4] Staging: iio: light: Added correct vendor-prefix for device isl29028   Darshana Padmadas
• [PATCH v4 4/4] arch: arm: boot: dts: Added correct vendor-prefix with device name to compatible property   Darshana Padmadas
• [PATCH v2] ARM: dts: rockchip: use internal pull-up resistors on I2C busses   Karl Palsson
• [PATCH v2] ARM: dts: rockchip: use internal pull-up resistors on I2C busses   Karl Palsson
• [PATCH] pwm-backlight: Turn off pwm backlight in probe   Markus Pargmann
• [PATCH 1/2] regulator: imx-anatop: Set default voltage selector for vddpu   Markus Pargmann
• [PATCH 2/2] regulator: imx-anatop: Fail on invalid voltage selector   Markus Pargmann
• [PATCH 1/3] staging: drm/imx: parallel-display: Add 24-bit BGR support   Markus Pargmann
• [PATCH 2/3] imx-drm: parallel-display: Fix drm_panel support   Markus Pargmann
• [PATCH 3/3] imx-drm: parallel-display: Fix dpms mode handling   Markus Pargmann
• [PATCH 0/5] regulator: Fix core behaviour for gpio 0   Markus Pargmann
• [PATCH 1/5] regulator: Add ena_gpio_valid config   Markus Pargmann
• [PATCH 2/5] regulator: Set ena_gpio_valid in regulator drivers   Markus Pargmann
• [PATCH 3/5] regulator: Fix ena_gpio check   Markus Pargmann
• [PATCH 4/5] regulator: Use gpio_is_valid   Markus Pargmann
• [PATCH 5/5] regulator: Remove unnecessary ena_gpio initializations   Markus Pargmann
• [PATCH] pwm-backlight: Turn off pwm backlight in probe   Markus Pargmann
• [PATCH 2/5] regulator: Set ena_gpio_valid in regulator drivers   Markus Pargmann
• [PATCH 5/5] regulator: Remove unnecessary ena_gpio initializations   Markus Pargmann
• [PATCH 1/5] regulator: Add ena_gpio_valid config   Markus Pargmann
• [PATCH 2/5] regulator: Set ena_gpio_valid in regulator drivers   Markus Pargmann
• [PATCH 4/5] regulator: Use gpio_is_valid   Markus Pargmann
• [PATCH 1/5] regulator: Add ena_gpio_valid config   Markus Pargmann
• [PATCH] pwm-backlight: Turn off pwm backlight in probe   Markus Pargmann
• [PATCH v2 0/4] regulator: Fix core behaviour for gpio 0   Markus Pargmann
• [PATCH v2 1/4] regulator: Add ena_gpio_initialized to regulator_config   Markus Pargmann
• [PATCH v2 2/4] regulator: Set ena_gpio_initialized in regulator drivers   Markus Pargmann
• [PATCH v2 3/4] regulator: fixed: Use gpio_is_valid   Markus Pargmann
• [PATCH v2 4/4] regulator: gpio: Use gpio_is_valid   Markus Pargmann
• [PATCH v2 2/4] regulator: Set ena_gpio_initialized in regulator drivers   Markus Pargmann
• [PATCH] arm64: optimize memcpy_{from,to}io() and memset_io()   Joonwoo Park
• [PATCH] arm64: optimize memcpy_{from,to}io() and memset_io()   Joonwoo Park
• [PATCH] arm64: optimize memcpy_{from,to}io() and memset_io()   Joonwoo Park
• [PATCH] arm64: optimize memcpy_{from,to}io() and memset_io()   Joonwoo Park
• [PATCH] ARM: dts: add board dts file for Exynos3250-based Monk board   Kyungmin Park
• [PATCH 0/2] ARM: dts: Add new board dts file for Exynos3250-based Rinato board   Kyungmin Park
• [PATCH v3 ] ARM: sun7i: add support for A20-OLinuXino-Lime2   Iain Paton
• [PATCH v4] ARM: sun7i: add support for A20-OLinuXino-Lime2   Iain Paton
• [PATCH v5] ARM: sun7i: add support for A20-OLinuXino-Lime2   Iain Paton
• [PATCH v4] ARM: sun7i: add support for A20-OLinuXino-Lime2   Iain Paton
• [PATCH v2] arm64: Use DMA_ERROR_CODE to denote failed allocation   Sean Paul
• [RFC 09/10] drm/tegra: Add IOMMU support   Sean Paul
• [PATCHv0] arm: mvebu: add .dts file for Synology DS213j   Ben Peddell
• [PATCHv0] arm: mvebu: add .dts file for Synology DS213j   Ben Peddell
• [PATCH V4 6/7] MAINTAINERS: Entry for Cygnus/iproc arm architecture and clock drivers   Joe Perches
• [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator   Joe Perches
• [PATCH] MAINTAINERS: Update Zynq maintainer record   Joe Perches
• [RFC V2] arm/arm64:add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction   Joe Perches
• [PATCH v2 8/8] MAINTAINERS: add at91 power and memory entries   Joe Perches
• [PATCH] carl9170: Convert byte_rev_table uses to bitrev8   Joe Perches
• [PATCH] 6fire: Convert byte_rev_table uses to bitrev8   Joe Perches
• [PATCH] 6fire: Convert byte_rev_table uses to bitrev8   Joe Perches
• [RFC V4 1/3] add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction   Joe Perches
• [RFC] arm:remove clear_thread_flag(TIF_UPROBE)   Joe Perches
• [RFC] arm:remove clear_thread_flag(TIF_UPROBE)   Joe Perches
• [PATCH] davinci: Use standard logging styles   Joe Perches
• [PATCH v1 1/5] mfd: tps65910: Convert ti, system-power-controller DT property to poweroff-source   Romain Perier
• [PATCH v1 2/5] ARM: dts: tegra: Use poweroff-source DT property in tps65911 for tegra30 apalis   Romain Perier
• [PATCH v1 3/5] ARM: dts: tegra: Use poweroff-source DT property in tps65911 for tegra30 beaver   Romain Perier
• [PATCH v1 4/5] ARM: dts: tegra: Use poweroff-source DT property in tps65911 for tegra30 cardhu   Romain Perier
• [PATCH v1 5/5] ARM: dts: tegra: Use poweroff-source DT property in tps65911 for tegra30 colibri   Romain Perier
• [PATCH v1 1/5] mfd: tps65910: Convert ti, system-power-controller DT property to poweroff-source   Romain Perier
• [PATCH v1 1/4] ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066   Romain Perier
• [PATCH v1 2/4] dt-bindings: Document Marsboard RK3066 in Rockchip platforms dt-bindings   Romain Perier
• [PATCH v1 3/4] ARM: dts: rockchip: Add EMAC Rockchip for RK3066 SoCs   Romain Perier
• [PATCH v1 4/4] ARM: dts: rockchip: Enable emac node in rk3066a-marsboard   Romain Perier
• [PATCH v1 1/4] ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066   Romain Perier
• [PATCH v1 01/10] of: Rename "poweroff-source" property to "system-power-controller"   Romain Perier
• [PATCH v1 02/10] dt-bindings: Document the standard property "system-power-controller"   Romain Perier
• [PATCH v1 03/10] regulator: act8865: Use of_is_system_power_controller helper function   Romain Perier
• [PATCH v2 04/10] ARM: dts: rockchip: Enable power off in pmic for Radxa Rock   Romain Perier
• [PATCH v1 05/10] dt-bindings: act8865: Update documentation about property system-power-controller   Romain Perier
• [PATCH v2 06/10] mfd: tps65910: Use the standard DT property system-power-controller   Romain Perier
• [PATCH v2 07/10] ARM: dts: tegra: Use standard power-off property in tps65911 for tegra30 apalis   Romain Perier
• [PATCH v2 08/10] ARM: dts: tegra: Use standard power-off property in tps65911 for tegra30 beaver   Romain Perier
• [PATCH v2 09/10] ARM: dts: tegra: Use standard power-off property in tps65911 for tegra30 cardhu   Romain Perier
• [PATCH v2 10/10] ARM: dts: tegra: Use standard power-off property in tps65911 for tegra30 colibri   Romain Perier
• [PATCH v2 06/10] mfd: tps65910: Use the standard DT property system-power-controller   Romain Perier
• [PATCH v1 01/10] of: Rename "poweroff-source" property to "system-power-controller"   Romain Perier
• [PATCH v2 07/10] ARM: dts: tegra: Use standard power-off property in tps65911 for tegra30 apalis   Romain Perier
• [PATCH v1 02/10] dt-bindings: Document the standard property "system-power-controller"   Romain Perier
• [PATCH v2 1/4] ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066   Romain Perier
• [PATCH v2 2/4] dt-bindings: Document Marsboard RK3066 in Rockchip platforms dt-bindings   Romain Perier
• [PATCH v1 3/4] ARM: dts: rockchip: Add EMAC Rockchip for RK3066 SoCs   Romain Perier
• [PATCH v1 4/4] ARM: dts: rockchip: Enable emac node in rk3066a-marsboard   Romain Perier
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Romain Perier
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Romain Perier
• [PATCH v7 4/4] thermal: Add Tegra SOCTHERM thermal management driver   Mikko Perttunen
• [PATCH v5 00/16] Tegra124 CL-DVFS / DFLL clocksource + cpufreq   Mikko Perttunen
• [PATCH v5 01/16] clk: tegra: Add binding for the Tegra124 DFLL clocksource   Mikko Perttunen
• [PATCH v5 02/16] clk: tegra: Add library for the DFLL clock source (open-loop mode)   Mikko Perttunen
• [PATCH v5 03/16] clk: tegra: Add closed loop support for the DFLL   Mikko Perttunen
• [PATCH v5 04/16] clk: tegra: Add functions for parsing CVB tables   Mikko Perttunen
• [PATCH v5 05/16] clk: tegra: Add DFLL DVCO reset control for Tegra124   Mikko Perttunen
• [PATCH v5 06/16] clk: tegra: Add Tegra124 DFLL clocksource platform driver   Mikko Perttunen
• [PATCH v5 07/16] clk: tegra: Save/restore CCLKG_BURST_POLICY on suspend   Mikko Perttunen
• [PATCH v5 08/16] clk: tegra: Add the DFLL as a possible parent of the cclk_g clock   Mikko Perttunen
• [PATCH v5 09/16] ARM: tegra: Add the DFLL to Tegra124 device tree   Mikko Perttunen
• [PATCH v5 10/16] ARM: tegra: Enable the DFLL on the Jetson TK1   Mikko Perttunen
• [PATCH v5 11/16] cpufreq: tegra124: Add device tree bindings   Mikko Perttunen
• [PATCH v5 12/16] cpufreq: tegra: Rename tegra-cpufreq to tegra20-cpufreq   Mikko Perttunen
• [PATCH v5 13/16] cpufreq: Add cpufreq driver for Tegra124   Mikko Perttunen
• [PATCH v5 14/16] ARM: tegra: Add entries for cpufreq on Tegra124   Mikko Perttunen
• [PATCH v5 15/16] ARM: tegra: Add CPU regulator to the Jetson TK1 device tree   Mikko Perttunen
• [PATCH v5 16/16] ARM: tegra: enable Tegra124 cpufreq driver by default   Mikko Perttunen
• [PATCH v5 02/16] clk: tegra: Add library for the DFLL clock source (open-loop mode)   Mikko Perttunen
• [PATCH v6 02/16] clk: tegra: Add library for the DFLL clock source (open-loop mode)   Mikko Perttunen
• [PATCH v6 03/16] clk: tegra: Add closed loop support for the DFLL   Mikko Perttunen
• [PATCH RFT 0/8] Marvell PXA168 libphy handling and Berlin Ethernet   Thomas Petazzoni
• [PATCH RFT 0/8] Marvell PXA168 libphy handling and Berlin Ethernet   Thomas Petazzoni
• [PATCH] fix for certain sequnce of request_irq can cause irq storm   Thomas Petazzoni
• [PATCH] fix for certain sequnce of request_irq can cause irq storm   Thomas Petazzoni
• [PATCH 5/8] power: reset: at91-reset: use at91_ramc_shutdown   Thomas Petazzoni
• [PATCH 1/4] clocksource: armada-370-xp: Add missing clock enable   Thomas Petazzoni
• [PATCH 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC   Thomas Petazzoni
• [PATCH 3/4] clocksource: armada-370-xp: Use the reference clock on A375 SoC   Thomas Petazzoni
• [PATCH 4/4] ARM: dts: Enable the reference clock for timer and watchdog on Armada 375 SoC   Thomas Petazzoni
• [PATCH 0/4] Make Armada 375 use the reference clock when possible   Thomas Petazzoni
• [PATCH 0/4] Make Armada 375 use the reference clock when possible   Thomas Petazzoni
• [PATCH 0/4] Make Armada 375 use the reference clock when possible   Thomas Petazzoni
• [PATCH 5/7] ARM: mvebu: Enable Performance Monitor Unit on Armada 375 SoC   Thomas Petazzoni
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   Thomas Petazzoni
• [PATCH 5/7] ARM: mvebu: Enable Performance Monitor Unit on Armada 375 SoC   Thomas Petazzoni
• [PATCH 0/4] Make Armada 375 use the reference clock when possible   Thomas Petazzoni
• [PATCH 1/4] ARM: mvebu: Clean-up the Armada XP support   Thomas Petazzoni
• [PATCH 00/17] Suspend to RAM support for Armada XP   Thomas Petazzoni
• [PATCH 01/17] Documentation: dt-bindings: minimal documentation for MVEBU SDRAM controller   Thomas Petazzoni
• [PATCH 02/17] ARM: mvebu: enable strex backoff delay   Thomas Petazzoni
• [PATCH 03/17] irqchip: irq-armada-370-xp: use proper return value for ->set_affinity()   Thomas Petazzoni
• [PATCH 04/17] irqchip: irq-armada-370-xp: suspend/resume support   Thomas Petazzoni
• [PATCH 05/17] clocksource: time-armada-370-xp: add suspend/resume support   Thomas Petazzoni
• [PATCH 06/17] gpio: mvebu: add suspend/resume support   Thomas Petazzoni
• [PATCH 07/17] bus: mvebu-mbus: suspend/resume support   Thomas Petazzoni
• [PATCH 08/17] bus: mvebu-mbus: provide a mechanism to save SDRAM window configuration   Thomas Petazzoni
• [PATCH 09/17] clk: mvebu: add suspend/resume for gatable clocks   Thomas Petazzoni
• [PATCH 10/17] ARM: mvebu: implement suspend/resume support for Armada XP   Thomas Petazzoni
• [PATCH 11/17] ARM: mvebu: reserve the first 10 KB of each memory bank for suspend/resume   Thomas Petazzoni
• [PATCH 12/17] ARM: mvebu: Armada XP GP specific suspend/resume code   Thomas Petazzoni
• [PATCH 13/17] ARM: mvebu: make sure MMU is disabled in armada_370_xp_cpu_resume   Thomas Petazzoni
• [PATCH 14/17] ARM: mvebu: synchronize secondary CPU clocks on resume   Thomas Petazzoni
• [PATCH 15/17] ARM: mvebu: add suspend/resume DT information for Armada XP GP   Thomas Petazzoni
• [PATCH 16/17] ARM: mvebu: adjust mbus controller description on Armada 370/XP   Thomas Petazzoni
• [PATCH 17/17] ARM: mvebu: add SDRAM controller description for Armada XP   Thomas Petazzoni
• [PATCH 2/4] ARM: mvebu: Move SCU power up in a function   Thomas Petazzoni
• [PATCH 2/4] ARM: mvebu: Move SCU power up in a function   Thomas Petazzoni
• [PATCH 12/17] ARM: mvebu: Armada XP GP specific suspend/resume code   Thomas Petazzoni
• [PATCH 12/17] ARM: mvebu: Armada XP GP specific suspend/resume code   Thomas Petazzoni
• [PATCH 12/17] ARM: mvebu: Armada XP GP specific suspend/resume code   Thomas Petazzoni
• [PATCH 12/17] ARM: mvebu: Armada XP GP specific suspend/resume code   Thomas Petazzoni
• [PATCHv2 0/3] ARM: mvebu: disable I/O coherency on !SMP   Thomas Petazzoni
• [PATCHv2 1/3] ARM: mvebu: make the coherency_ll.S functions work with no coherency fabric   Thomas Petazzoni
• [PATCHv2 2/3] ARM: mvebu: disable I/O coherency on non-SMP situations on Armada 370/XP   Thomas Petazzoni
• [PATCHv2 3/3] ARM: mvebu: add missing of_node_put() call in coherency.c   Thomas Petazzoni
• [PATCH 0/6] ASoC/ARM: move Marvell Armada 370 DB to simple-audio-card   Thomas Petazzoni
• [PATCH 1/6] ASoC: cs42l51: re-add of_match_table pointer   Thomas Petazzoni
• [PATCH 2/6] ASoC: cs42l51: make driver user-selectable   Thomas Petazzoni
• [PATCH 3/6] ASoC: kirkwood: get rid of armada-370-db driver   Thomas Petazzoni
• [PATCH 4/6] ARM: mvebu: remove conflicting muxing on Armada 370 DB   Thomas Petazzoni
• [PATCH 5/6] ARM: mvebu: use simple-card DT binding for audio on Armada 370 DB   Thomas Petazzoni
• [PATCH 6/6] ARM: mvebu: update mvebu_v7_defconfig for Armada 370 audio   Thomas Petazzoni
• [PATCH 3/6] ASoC: kirkwood: get rid of armada-370-db driver   Thomas Petazzoni
• [PATCH 3/6] ASoC: kirkwood: get rid of armada-370-db driver   Thomas Petazzoni
• [PATCH 06/17] gpio: mvebu: add suspend/resume support   Thomas Petazzoni
• [PATCH v2 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC   Thomas Petazzoni
• [PATCH v2 3/4] clocksource: armada-370-xp: Use the reference clock on A375 SoC   Thomas Petazzoni
• [PATCH v2 4/4] ARM: mvebu: Enable the reference clock for timer and watchdog on Armada 375 SoC   Thomas Petazzoni
• [PATCH v2 0/4] Make Armada 375 use the reference clock when possible   Thomas Petazzoni
• [PATCHv2 0/4] Add Altera peripheral memories to EDAC framework   Borislav Petkov
• [PATCHv2 0/4] Add Altera peripheral memories to EDAC framework   Borislav Petkov
• [PATCHv2 0/4] Add Altera peripheral memories to EDAC framework   Borislav Petkov
• [PATCH v7 4/7] qcom: pm: Add cpu low power mode functions   Lorenzo Pieralisi
• [PATCH] arm64: topology: Fix handling of multi-level cluster MPIDR-based detection   Lorenzo Pieralisi
• [PATCH 1/5] ARM: sun4i: Relicense the A10 DTSI under GPLv2/X11   Lorenzo Pieralisi
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Lorenzo Pieralisi
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Lorenzo Pieralisi
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Lorenzo Pieralisi
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Lorenzo Pieralisi
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Lorenzo Pieralisi
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Lorenzo Pieralisi
• [PATCH] arm64: dts: exynos7: add support for cpuidle core power down   Lorenzo Pieralisi
• [PATCH RFC 2/2] arm: kernel: fix pci_mmap_page_range() offset calculation   Lorenzo Pieralisi
• [PATCH] arm64: dts: exynos7: add support for cpuidle core power down   Lorenzo Pieralisi
• [PATCH RFC 2/2] arm: kernel: fix pci_mmap_page_range() offset calculation   Lorenzo Pieralisi
• [PATCH v3] ARM: dts: add CPU nodes for Exynos4 SoCs   Lorenzo Pieralisi
• [PATCH 1/3] drivers: cpuidle: add status property to ARM idle states   Lorenzo Pieralisi
• [PATCH 2/3] drivers: cpuidle: add idle-state-name description to ARM idle states   Lorenzo Pieralisi
• [PATCH 3/3] drivers: cpuidle: remove cpuidle-arm64 duplicate error messages   Lorenzo Pieralisi
• [PATCH v3 04/27] arm/MSI: Save MSI chip in pci_sys_data   Lorenzo Pieralisi
• [PATCH 1/3] drivers: cpuidle: add status property to ARM idle states   Lorenzo Pieralisi
• [PATCH] arm64: dts: exynos7: add support for cpuidle core power down   Lorenzo Pieralisi
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Lorenzo Pieralisi
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Lorenzo Pieralisi
• [PATCH v8 5/7] qcom: cpuidle: Add cpuidle driver for QCOM cpus   Lorenzo Pieralisi
• [PATCH RFC 1/2] drivers: pci: fix window allocation order wrt bus_range filtering   Lorenzo Pieralisi
• [PATCH RFC 2/2] drivers: pci: convert generic host controller to DT resource parsing API   Lorenzo Pieralisi
• [PATCH RFC 1/2] drivers: pci: fix window allocation order wrt bus_range filtering   Lorenzo Pieralisi
• [PATCH v8 5/7] qcom: cpuidle: Add cpuidle driver for QCOM cpus   Lorenzo Pieralisi
• [PATCH RFC v2 2/2] arm: kernel: fix pci_mmap_page_range() offset calculation   Lorenzo Pieralisi
• [PATCH v5 12/18] ACPI / processor: Make it possible to get CPU hardware ID via GICC   Lorenzo Pieralisi
• [PATCH RFC 2/2] drivers: pci: convert generic host controller to DT resource parsing API   Lorenzo Pieralisi
• [RFC 2/4] PCI: generic: Add support for ARM64 and MSI(x)   Lorenzo Pieralisi
• [PATCHv4 3/7] arm64: Move cpu_resume into the text section   Lorenzo Pieralisi
• [PATCH v5 12/18] ACPI / processor: Make it possible to get CPU hardware ID via GICC   Lorenzo Pieralisi
• [PATCH 2/3] arm64: psci: fix cpu_suspend to check idle state type for index   Lorenzo Pieralisi
• [PATCH 1/3] arm64: psci: warn if psci_power_state variable is not initialised   Lorenzo Pieralisi
• [PATCH 3/3] arm64: psci: Add support to call cpu_suspend with deepest C state.   Lorenzo Pieralisi
• [RFC PATCH 0/2] arm: pcibios: remove pci_sys_data domain   Lorenzo Pieralisi
• [RFC PATCH 1/2] arm: cns3xxx: pci: remove artificial dependency on pci_sys_data domain   Lorenzo Pieralisi
• [RFC PATCH 2/2] arm: pcibios: move to generic PCI domains   Lorenzo Pieralisi
• [RFC PATCH 2/2] arm: pcibios: move to generic PCI domains   Lorenzo Pieralisi
• [RFC PATCH 2/2] arm: pcibios: move to generic PCI domains   Lorenzo Pieralisi
• [RFC PATCH 0/2] arm: pcibios: remove pci_sys_data domain   Lorenzo Pieralisi
• [RFC PATCH 0/2] arm: pcibios: remove pci_sys_data domain   Lorenzo Pieralisi
• [PATCH] ARM: shmobile: r7s72100: Remove r7s72100-genmai.dtb for ARCH_SHMOBILE_LEGACY   Laurent Pinchart
• [PATCH] [RFC] ARM: shmobile: Add early debugging support using SCIF(A)   Laurent Pinchart
• [RFC PATCH v3 7/7] arm: dma-mapping: plumb our iommu mapping ops into arch_setup_dma_ops   Laurent Pinchart
• [PATCH v2 2/2] Documentation: dmaengine: Add a documentation for the dma controller API   Laurent Pinchart
• [PATCH v2 2/2] Documentation: dmaengine: Add a documentation for the dma controller API   Laurent Pinchart
• [PATCH v2 2/2] Documentation: dmaengine: Add a documentation for the dma controller API   Laurent Pinchart
• [RFC PATCH v3 5/7] dma-mapping: detect and configure IOMMU in of_dma_configure   Laurent Pinchart
• [RFC PATCH v3 6/7] arm: call iommu_init before of_platform_populate   Laurent Pinchart
• [RFC PATCH v3 4/7] iommu: provide helper function to configure an IOMMU for an of master   Laurent Pinchart
• [RFC PATCH v3 6/7] arm: call iommu_init before of_platform_populate   Laurent Pinchart
• [RFC PATCH v3 6/7] arm: call iommu_init before of_platform_populate   Laurent Pinchart
• [PATCH v2 01/53] dmaengine: Make the destination abbreviation coherent   Laurent Pinchart
• [PATCH v2 02/53] dmaengine: Make channel allocation callbacks optional   Laurent Pinchart
• [PATCH v2 03/53] dmaengine: Introduce a device_config callback   Laurent Pinchart
• [PATCH v2 04/53] dmaengine: split out pause/resume operations from device_control   Laurent Pinchart
• [PATCH v2 05/53] dmaengine: Add device_terminate_all callback   Laurent Pinchart
• [PATCH v2 06/53] dmaengine: Create a generic dma_slave_caps callback   Laurent Pinchart
• [PATCH v2 35/53] dmaengine: sh: Split device_control   Laurent Pinchart
• [PATCH v2 40/53] dmaengine: xilinx: Split device_control   Laurent Pinchart
• [PATCH v2 2/2] Documentation: dmaengine: Add a documentation for the dma controller API   Laurent Pinchart
• [PATCH v2 06/53] dmaengine: Create a generic dma_slave_caps callback   Laurent Pinchart
• [PATCH v2] ARM: shmobile: Add early debugging support using SCIF(A)   Laurent Pinchart
• [PATCH v2] ARM: shmobile: Add early debugging support using SCIF(A)   Laurent Pinchart
• [PATCH v3 05/59] dmaengine: Make channel allocation callbacks optional   Laurent Pinchart
• [PATCH v3 09/59] dmaengine: Remove the need to declare device_control   Laurent Pinchart
• [PATCH v3 11/59] dmaengine: Move slave caps to dma_device   Laurent Pinchart
• [PATCH v3 58/59] dmaengine: Add a warning for drivers not using the generic slave caps retrieval   Laurent Pinchart
• [PATCH v3 59/59] dmaengine: Remove device_control and device_slave_caps   Laurent Pinchart
• [PATCH v3 04/59] dmaengine: Rework dma_chan_get   Laurent Pinchart
• [PATCH v2] ARM: shmobile: Add early debugging support using SCIF(A)   Laurent Pinchart
• Koelsch boot broken on 3.18-rc1 ?   Laurent Pinchart
• Koelsch boot broken on 3.18-rc1 ?   Laurent Pinchart
• Koelsch boot broken on 3.18-rc1 ?   Laurent Pinchart
• [PATCH v3 58/59] dmaengine: Add a warning for drivers not using the generic slave caps retrieval   Laurent Pinchart
• [PATCH 0/4] Low/high memory CMA reservation fixes   Laurent Pinchart
• [PATCH 1/4] mm: cma: Don't crash on allocation if CMA area can't be activated   Laurent Pinchart
• [PATCH 2/4] mm: cma: Always consider a 0 base address reservation as dynamic   Laurent Pinchart
• [PATCH 3/4] mm: cma: Ensure that reservations never cross the low/high mem boundary   Laurent Pinchart
• [PATCH 4/4] mm: cma: Use %pa to print physical addresses   Laurent Pinchart
• [PATCH] clocksource: arm_arch_timer: Don't wait for probe of unexisting timers   Laurent Pinchart
• [PATCH] clocksource: arm_arch_timer: Don't wait for probe of unexisting timers   Laurent Pinchart
• [PATCH] clocksource: arm_arch_timer: Don't wait for probe of unexisting timers   Laurent Pinchart
• [PATCH 1/4] mm: cma: Don't crash on allocation if CMA area can't be activated   Laurent Pinchart
• [PATCH 2/4] mm: cma: Always consider a 0 base address reservation as dynamic   Laurent Pinchart
• [PATCH 1/4] mm: cma: Don't crash on allocation if CMA area can't be activated   Laurent Pinchart
• [PATCH 3/4] mm: cma: Ensure that reservations never cross the low/high mem boundary   Laurent Pinchart
• [PATCH v2 0/4] Low/high memory CMA reservation fixes   Laurent Pinchart
• [PATCH v2 1/4] mm: cma: Don't crash on allocation if CMA area can't be activated   Laurent Pinchart
• [PATCH v2 2/4] mm: cma: Always consider a 0 base address reservation as dynamic   Laurent Pinchart
• [PATCH v2 3/4] mm: cma: Ensure that reservations never cross the low/high mem boundary   Laurent Pinchart
• [PATCH v2 4/4] mm: cma: Use %pa to print physical addresses   Laurent Pinchart
• [PATCH v2 3/4] mm: cma: Ensure that reservations never cross the low/high mem boundary   Laurent Pinchart
• [PATCH 09/11] dmaengine: sh: Remove chancnt affectations   Laurent Pinchart
• [RFC PATCH v3 5/7] dma-mapping: detect and configure IOMMU in of_dma_configure   Laurent Pinchart
• [PATCH v4 57/58] dmaengine: Add a warning for drivers not using the generic slave caps retrieval   Laurent Pinchart
• [PATCH] dmaengine: Move dma_get_slave_caps() implementation to dmaengine.c   Laurent Pinchart
• [PATCH v4 10/58] dmaengine: Create a generic dma_slave_caps callback   Laurent Pinchart
• arm: JUMP_LABEL and DEBUG_SET_MODULE_RONX should be mutually exclusive?   Paolo Pisati
• [PATCH 1/1] tty/serial: at91: fix rx ring buffer management   Cyrille Pitchen
• [PATCH] ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854   Nicolas Pitre
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   Nicolas Pitre
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   Nicolas Pitre
• [PATCH v2] ARM: supplementing IO accessors with 64 bit capability   Nicolas Pitre
• Regarding tx-nocache-copy in the Sheevaplug   Benjamin Poirier
• Regarding tx-nocache-copy in the Sheevaplug   Benjamin Poirier
• Regarding tx-nocache-copy in the Sheevaplug   Benjamin Poirier
• [PATCH/RFC v2 1/4] ARM: hw_breakpoint: Add arm_dbg_regs_available flag   Mathieu Poirier
• [PATCH v4] ARM: perf: save/restore pmu registers in pm notifier   Mathieu Poirier
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   Mathieu Poirier
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   Mathieu Poirier
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   Mathieu Poirier
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   Mathieu Poirier
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   Mathieu Poirier
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   Mathieu Poirier
• [PATCH] at91: sam9x5 dt: add usart dma definitions to dt   Jiri Prchal
• [PATCH] at91: sam9x5 dt: add usart dma definitions to dt   Jiri Prchal
• [PATCH] at91: sam9x5 dt: add usart dma definitions to dt   Jiří Prchal
• [PATCH 1/2] ARM: dts: vf500/vf610: support VF500 SoC   Bill Pringlemeir
• [PATCH] efi/arm64: store Runtime Services revision   Sam Protsenko
• [RFC PATCH] arm/arm64: KVM: Fix BE accesses to GICv2 EISR and ELRSR regs   Andre Przywara
• [PATCH v2 00/15] KVM GICv3 emulation   Andre Przywara
• BPF crash with 3.18-rc1 on arm64 Juno hardware   Andre Przywara
• BPF crash with 3.18-rc1 on arm64 Juno hardware   Andre Przywara
• [PATCH v2 03/15] arm/arm64: KVM: refactor vgic_handle_mmio() function   Andre Przywara
• [PATCH v2 04/15] arm/arm64: KVM: wrap 64 bit MMIO accesses with two 32 bit ones   Andre Przywara
• [PATCH v2 05/15] arm/arm64: KVM: introduce per-VM ops   Andre Przywara
• [PATCH v2 01/15] arm/arm64: KVM: rework MPIDR assignment and add accessors   Andre Przywara
• [PATCH v2 06/15] arm/arm64: KVM: make the maximum number of vCPUs a per-VM value   Andre Przywara
• [PATCH v3 00/19] KVM GICv3 emulation   Andre Przywara
• [PATCH v3 01/19] arm/arm64: KVM: rework MPIDR assignment and add accessors   Andre Przywara
• [PATCH v3 02/19] arm/arm64: KVM: pass down user space provided GIC type into vGIC code   Andre Przywara
• [PATCH v3 03/19] arm/arm64: KVM: refactor vgic_handle_mmio() function   Andre Przywara
• [PATCH v3 04/19] arm/arm64: KVM: wrap 64 bit MMIO accesses with two 32 bit ones   Andre Przywara
• [PATCH v3 05/19] arm/arm64: KVM: introduce per-VM ops   Andre Przywara
• [PATCH v3 06/19] arm/arm64: KVM: move [sg]et_lr into per-VM ops   Andre Przywara
• [PATCH v3 07/19] arm/arm64: KVM: move kvm_register_device_ops() into vGIC probing   Andre Przywara
• [PATCH v3 08/19] arm/arm64: KVM: dont rely on a valid GICH base address   Andre Przywara
• [PATCH v3 09/19] arm/arm64: KVM: make the maximum number of vCPUs a per-VM value   Andre Przywara
• [PATCH v3 10/19] arm/arm64: KVM: make the value of ICC_SRE_EL1 a per-VM variable   Andre Przywara
• [PATCH v3 11/19] arm/arm64: KVM: refactor MMIO accessors   Andre Przywara
• [PATCH v3 12/19] arm/arm64: KVM: refactor/wrap vgic_set/get_attr()   Andre Przywara
• [PATCH v3 13/19] arm/arm64: KVM: add vgic.h header file   Andre Przywara
• [PATCH v3 14/19] arm/arm64: KVM: split GICv2 specific emulation code from vgic.c   Andre Przywara
• [PATCH v3 15/19] arm/arm64: KVM: add opaque private pointer to MMIO accessors   Andre Przywara
• [PATCH v3 16/19] arm/arm64: KVM: add virtual GICv3 distributor emulation   Andre Przywara
• [PATCH v3 17/19] arm64: KVM: add SGI system register trapping   Andre Przywara
• [PATCH v3 18/19] arm/arm64: KVM: enable kernel side of GICv3 emulation   Andre Przywara
• [PATCH v3 19/19] arm/arm64: KVM: allow userland to request a virtual GICv3   Andre Przywara
• [RFC Patch 0/4] mfd: AXP20x: Add power supply sub-driver   Bruno Prémont
• [RFC Patch 1/4] mfd: AXP20x: Add power supply bindings documentation   Bruno Prémont
• [RFC Patch 2/4] mfd: AXP20x: Add power supply sub-driver   Bruno Prémont
• [RFC Patch 3/4] mfd: AXP20x: Add power supply defconfig entries   Bruno Prémont
• [RFC Patch 4/4] mfd: AXP20x: Add backup battery DTS entry for Cubietruck   Bruno Prémont
• [RFC Patch 1/4] mfd: AXP20x: Add power supply bindings documentation   Bruno Prémont
• [PATCH v7 0/6] mfd: AXP20x: Add support for AXP202 and AXP209   Bruno Prémont
• [RFC Patch 2/4] mfd: AXP20x: Add power supply sub-driver   Bruno Prémont
• [PATCH 1/3] qe-uart: modify qe-uart to adapt both powerpc and arm   Zhao Qiang
• [PATCH 3/3] ls1021a-twr/qe: add qe node to ls1-twr   Zhao Qiang
• [PATCH] nand: omap2: fix building with CONFIG_MTD_NAND_OMAP_BCH=m   Roger Quadros
• [PATCH] nand: omap2: fix building with CONFIG_MTD_NAND_OMAP_BCH=m   Roger Quadros
• [PATCH] nand: omap2: fix building with CONFIG_MTD_NAND_OMAP_BCH=m   Roger Quadros
• [PATCH 0/2] mtd: nand: omap: Fix build with CONFIG_MTD_NAND_OMAP_BCH=m   Roger Quadros
• [PATCH v2 1/2] mtd: nand: Force omap_elm to be built as a module if omap2_nand is a module   Roger Quadros
• [PATCH 2/2] mtd: nand: omap: Correct CONFIG_MTD_NAND_OMAP_BCH help message   Roger Quadros
• [PATCH 0/4] ARM: dts: dra72-evm: NAND and USB support   Roger Quadros
• [PATCH 1/4] ARM: dts: dra72-evm: Add NAND support   Roger Quadros
• [PATCH 2/4] ARM: dts: DRA7: Move USB_OTG 4 to dra74x.dtsi   Roger Quadros
• [PATCH 3/4] ARM: dts: dra72-evm: Enable USB support for dra72-evm.   Roger Quadros
• [PATCH 4/4] ARM: dts: dra72-evm: Add regulator information to USB2 PHYs   Roger Quadros
• [PATCH] ARM: dts: am335x-evm: Fix 5th NAND partition's name   Roger Quadros
• [PATCH 1/4] ARM: dts: dra72-evm: Add NAND support   Roger Quadros
• [PATCH 01/10] ARM: dts: Fix bootloader version dependencies by muxing n900 smc91x pins   Roger Quadros
• [PATCH 02/10] ARM: dts: Fix wrong GPMC size mappings for omaps   Roger Quadros
• [PATCH 04/10] ARM: dts: Add GPMC timings for omap zoom serial port   Roger Quadros
• [PATCH 05/10] ARM: OMAP2+: Fix support for multiple devices on a GPMC chip select   Roger Quadros
• [PATCH 06/10] ARM: OMAP2+: Show bootloader GPMC timings to allow configuring the .dts file   Roger Quadros
• [PATCH 06/10] ARM: OMAP2+: Show bootloader GPMC timings to allow configuring the .dts file   Roger Quadros
• [PATCH 07/10] ARM: OMAP2+: Require proper GPMC timings for devices   Roger Quadros
• [PATCH 08/10] ARM: OMAP2+: Drop legacy code for gpmc-smc91x.c   Roger Quadros
• [PATCH 0/4] ARM: dts: dra72-evm: NAND and USB support   Roger Quadros
• [PATCH 06/10] ARM: OMAP2+: Show bootloader GPMC timings to allow configuring the .dts file   Roger Quadros
• [PATCH 06/10] ARM: OMAP2+: Show bootloader GPMC timings to allow configuring the .dts file   Roger Quadros
• [PATCH 0/4] Touchscreen performance related fixes   Vignesh R
• [PATCH 1/4] input: touchscreen: ti_am335x_tsc Interchange touchscreen and ADC steps   Vignesh R
• [PATCH 2/4] input: touchscreen: ti_am335x_tsc: Remove udelay in interrupt handler   Vignesh R
• [PATCH 3/4] arm: boot: dts: am335x-evm: Make charge delay a DT parameter for tsc   Vignesh R
• [PATCH 4/4] input: touchscreen: ti_am335x_tsc: Use charge delay DT parameter   Vignesh R
• [PATCH 0/3] Add support for ADC on am437x-gp and am43x-epos-evm   Vignesh R
• [PATCH 1/3] arm: mach-omap2: omap_hwmod_33xx_43xx_ipblock_data: Move am33xx_l4_hs_hwmod to ipblock_data   Vignesh R
• [PATCH 2/3] arm: mach-omap2: omap_hwmod_43xx_data: add hwmod support for tscadc on am43x-evm   Vignesh R
• [PATCH 3/3] arm: boot: dts: am4372: add tscadc DT entries for am437x-evm and am43x-epos-evm   Vignesh R
• [PATCH v4] dma: Add Xilinx AXI Direct Memory Access Engine driver support   Appana Durga Kedareswara Rao
• [PATCH v4] dma: Add Xilinx AXI Direct Memory Access Engine driver support   Appana Durga Kedareswara Rao
• [PATCH] mmc: dw_mmc: Reset DMA before enabling IDMAC   Sonny Rao
• [PATCH v3] clocksource: arch_timer: Fix code to use physical timers when requested   Sonny Rao
• [PATCH v3] clocksource: arch_timer: Allow the device tree to specify uninitialized CNTVOFF   Sonny Rao
• [PATCH v4] clocksource: arch_timer: Allow the device tree to specify uninitialized timer registers   Sonny Rao
• [PATCH v4] clocksource: arch_timer: Fix code to use physical timers when requested   Sonny Rao
• [PATCH] ASoC: rockchip-i2s: fix infinite loop in rockchip_snd_txctrl   Sonny Rao
• [PATCH] clk: rockchip: fix parent for spdif_8ch_frac on rk3288   Sonny Rao
• [PATCH v2] mmc: dw_mmc: Reset DMA before enabling IDMAC   Sonny Rao
• [PATCH v5 1/6] ARM: rockchip: convert to regmap and use pmu syscon if available   Sonny Rao
• [PATCH v2] mmc: dw_mmc: Reset DMA before enabling IDMAC   Sonny Rao
• [PATCH v4] ARM: dts: qcom: add CM-QS600 board   Mike Rapoport
• [PATCH v6 5/6] sched: replace capacity_factor by usage   Morten Rasmussen
• [PATCH v6 5/6] sched: replace capacity_factor by usage   Morten Rasmussen
• [PATCH v6 3/6] sched: add utilization_avg_contrib   Morten Rasmussen
• [PATCH 4/7] sched: Track group sched_entity usage contributions   Morten Rasmussen
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Thierry Reding
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Thierry Reding
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Thierry Reding
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Thierry Reding
• [RFC PATCH v3 7/7] arm: dma-mapping: plumb our iommu mapping ops into arch_setup_dma_ops   Thierry Reding
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Thierry Reding
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Thierry Reding
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Thierry Reding
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Thierry Reding
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Thierry Reding
• [RFC 09/10] drm/tegra: Add IOMMU support   Thierry Reding
• [PATCH] ARM: tegra: Move AHB Kconfig to drivers/amba   Thierry Reding
• [PATCH] ARM: tegra: Move AHB Kconfig to drivers/amba   Thierry Reding
• [PATCH 1/2] MAINTAINERS: add Alex Courbot for Tegra   Thierry Reding
• [PATCH 2/2] MAINTAINERS: condense some Tegra related entries   Thierry Reding
• [RFC PATCH v3 7/7] arm: dma-mapping: plumb our iommu mapping ops into arch_setup_dma_ops   Thierry Reding
• [PATCH v7 04/11] pwm: add DT bindings documentation for atmel-hlcdc-pwm driver   Thierry Reding
• [PATCH v7 03/11] pwm: add support for atmel-hlcdc-pwm device   Thierry Reding
• [PATCH v7 01/11] mfd: add atmel-hlcdc driver   Thierry Reding
• [PATCH v7 06/11] drm: add DT bindings documentation for atmel-hlcdc-dc driver   Thierry Reding
• [PATCH v7 10/11] ARM: at91/dt: add LCD panel description to sama5d3xdm.dtsi   Thierry Reding
• [PATCH v7 11/11] ARM: at91/dt: enable the LCD panel on sama5d3xek boards   Thierry Reding
• [PATCH v7 04/11] pwm: add DT bindings documentation for atmel-hlcdc-pwm driver   Thierry Reding
• [PATCH v7 03/11] pwm: add support for atmel-hlcdc-pwm device   Thierry Reding
• [PATCH v7 06/11] drm: add DT bindings documentation for atmel-hlcdc-dc driver   Thierry Reding
• [PATCH v7 10/11] ARM: at91/dt: add LCD panel description to sama5d3xdm.dtsi   Thierry Reding
• [RFC PATCH v3 7/7] arm: dma-mapping: plumb our iommu mapping ops into arch_setup_dma_ops   Thierry Reding
• [PATCHv7 1/2] pwm: Add Allwinner SoC support   Thierry Reding
• [PATCH v7 04/11] pwm: add DT bindings documentation for atmel-hlcdc-pwm driver   Thierry Reding
• [PATCH v7 10/11] ARM: at91/dt: add LCD panel description to sama5d3xdm.dtsi   Thierry Reding
• [PATCH v5 0/9] asm-generic/io.h overhaul   Thierry Reding
• [PATCH 1/9] ARC: Remove redundant PCI_IOBASE declaration   Thierry Reding
• [PATCH 2/9] ARM: ebsa110: Properly override I/O accessors   Thierry Reding
• [PATCH 3/9] ARM: ixp4xx: Properly override I/O accessors   Thierry Reding
• [PATCH 4/9] [IA64] Change xlate_dev_{kmem,mem}_ptr() prototypes   Thierry Reding
• [PATCH 5/9] /dev/mem: Use more consistent data types   Thierry Reding
• [PATCH 6/9] asm-generic/io.h: Reconcile I/O accessor overrides   Thierry Reding
• [PATCH 7/9] asm-generic/io.h: Implement generic {read,write}s*()   Thierry Reding
• [PATCH 8/9] ARM: Use include/asm-generic/io.h   Thierry Reding
• [PATCH 9/9] arm64: Use include/asm-generic/io.h   Thierry Reding
• [PATCH v7 06/11] drm: add DT bindings documentation for atmel-hlcdc-dc driver   Thierry Reding
• [PATCHv7 1/2] pwm: Add Allwinner SoC support   Thierry Reding
• [PATCH] pwm-backlight: Turn off pwm backlight in probe   Thierry Reding
• [PATCH] pwm-backlight: Turn off pwm backlight in probe   Thierry Reding
• [PATCHv5 2/3] pwm: make the PWM_POLARITY flag in DTB optional   Thierry Reding
• [PATCH v3 01/12] clk: tegra: Implement memory-controller clock   Thierry Reding
• [PATCH 02/12] amba: Add Kconfig file   Thierry Reding
• [PATCH v4 03/12] ARM: tegra: Move AHB Kconfig to drivers/amba   Thierry Reding
• [PATCH 04/12] of: Add NVIDIA Tegra memory controller binding   Thierry Reding
• [PATCH 06/12] ARM: tegra: Add memory controller support for Tegra20   Thierry Reding
• [PATCH 07/12] ARM: tegra: Add memory controller support for Tegra30   Thierry Reding
• [PATCH 08/12] ARM: tegra: Add memory controller support for Tegra114   Thierry Reding
• [PATCH 09/12] ARM: tegra: Add memory controller support for Tegra124   Thierry Reding
• [PATCH 10/12] ARM: tegra: Enable IOMMU for display controllers on Tegra30   Thierry Reding
• [PATCH 11/12] ARM: tegra: Enable IOMMU for display controllers on Tegra114   Thierry Reding
• [PATCH 12/12] ARM: tegra: Enable IOMMU for display controllers on Tegra124   Thierry Reding
• [RFC PATCH v3 6/7] arm: call iommu_init before of_platform_populate   Thierry Reding
• [RFC PATCH v3 6/7] arm: call iommu_init before of_platform_populate   Thierry Reding
• [PATCH 2/2] iommu: Implement a dummy bus_set_iommu()   Thierry Reding
• [PATCH v5 1/1] iommu-api: Add map_sg/unmap_sg functions   Thierry Reding
• Latest build test randconfig errors   Thierry Reding
• [PATCH 2/2] iommu: Implement a dummy bus_set_iommu()   Thierry Reding
• [PATCH RESEND V4 5/9] of: Add NVIDIA Tegra xHCI controller binding   Thierry Reding
• [PATCH RESEND V4 5/9] of: Add NVIDIA Tegra xHCI controller binding   Thierry Reding
• [PATCH RESEND V4 6/9] usb: xhci: Add NVIDIA Tegra xHCI host-controller driver   Thierry Reding
• [PATCH RESEND V4 2/9] mailbox: Add NVIDIA Tegra XUSB mailbox driver   Thierry Reding
• [PATCH RESEND V4 4/9] pinctrl: tegra-xusb: Add USB PHY support   Thierry Reding
• [PATCH RESEND V4 2/9] mailbox: Add NVIDIA Tegra XUSB mailbox driver   Thierry Reding
• [PATCH RESEND V4 4/9] pinctrl: tegra-xusb: Add USB PHY support   Thierry Reding
• [PATCH RESEND V4 5/9] of: Add NVIDIA Tegra xHCI controller binding   Thierry Reding
• [PATCH 06/12] ARM: tegra: Add memory controller support for Tegra20   Thierry Reding
• [PATCH v4 05/12] memory: Add NVIDIA Tegra memory controller support   Thierry Reding
• [PATCH v3 01/12] clk: tegra: Implement memory-controller clock   Thierry Reding
• [PATCH v4 05/12] memory: Add NVIDIA Tegra memory controller support   Thierry Reding
• [PATCH v4 05/12] memory: Add NVIDIA Tegra memory controller support   Thierry Reding
• [PATCH RESEND V4 5/9] of: Add NVIDIA Tegra xHCI controller binding   Thierry Reding
• [PATCH RESEND V4 4/9] pinctrl: tegra-xusb: Add USB PHY support   Thierry Reding
• [PATCH RESEND V4 5/9] of: Add NVIDIA Tegra xHCI controller binding   Thierry Reding
• [PATCH 2/2] mailbox: Don't unnecessarily re-arm the polling timer   Thierry Reding
• [PATCH v4 05/12] memory: Add NVIDIA Tegra memory controller support   Thierry Reding
• [PATCH RESEND V9 1/6] power: reset: Add generic SYSCON register mapped reset   Sebastian Reichel
• [RFC PATCH 15/16] power/reset: restart-poweroff: Register with kernel poweroff handler   Sebastian Reichel
• [PATCH] power: reset: at91-reset: fix power down register   Sebastian Reichel
• [PATCH v2 5/8] power: reset: at91-reset: use at91_ramc_shutdown   Sebastian Reichel
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Sebastian Reichel
• [PATCH] ARM: OMAP2+: Warn about deprecated legacy booting mode   Sebastian Reichel
• [PATCH 04/29] ncr5380: Remove unused macros   Hannes Reinecke
• [PATCH v2 08/36] ncr5380: Remove redundant AUTOSENSE macro   Hannes Reinecke
• [PATCH v2 10/36] ncr5380: Fix SCSI_IRQ_NONE bugs   Hannes Reinecke
• [PATCH v2 12/36] ncr5380: Cleanup host info() methods   Hannes Reinecke
• [PATCH v2 13/36] ncr5380: Move static PDMA spin counters to host data   Hannes Reinecke
• [PATCH v2 15/36] ncr5380: Remove *_RELEASE macros   Hannes Reinecke
• [PATCH v2 16/36] ncr5380: Drop legacy scsi.h include   Hannes Reinecke
• [PATCH v3 0/9] initial suport for Alphascale ASM9260   Oleksij Rempel
• [PATCH v3 1/9] ARM: add mach-asm9260   Oleksij Rempel
• [PATCH v3 2/9] arm: add lolevel debug support for asm9260   Oleksij Rempel
• [PATCH v3 3/9] ARM: dts: add DT for Alphascale ASM9260 SoC   Oleksij Rempel
• [PATCH v3 4/9] ARM: add alphascale,acc.txt bindings documentation   Oleksij Rempel
• [PATCH v3 5/9] ARM: clk: add clk-asm9260 driver   Oleksij Rempel
• [PATCH v3 6/9] clocksource: add asm9260_timer driver   Oleksij Rempel
• [PATCH v3 7/9] irqchip/irq-mxs.c: add asm9260 support   Oleksij Rempel
• [PATCH v3 8/9] tty/serial/mxs-auart.c: add initial Alphascale ASM9260 support   Oleksij Rempel
• [PATCH v3 9/9] add Alphascale to vendor-prefixes.txt   Oleksij Rempel
• [PATCH v4 1/2] irqchip: mxs: prepare driver for HW with different offsets   Oleksij Rempel
• [PATCH v4 2/2] irqchip: mxs: add Alpascale ASM9260 support   Oleksij Rempel
• [PATCH v3 0/9] initial suport for Alphascale ASM9260   Oleksij Rempel
• preferable method for pinctrl driver   Oleksij Rempel
• [PATCH v4 00/10] initial suport for Alphascale ASM9260   Oleksij Rempel
• [PATCH v4 01/10] ARM: add mach-asm9260   Oleksij Rempel
• [PATCH v4 02/10] arm: add lolevel debug support for asm9260   Oleksij Rempel
• [PATCH v4 03/10] ARM: dts: add DT for Alphascale ASM9260 SoC   Oleksij Rempel
• [PATCH v4 04/10] ARM: add alphascale,acc.txt bindings documentation   Oleksij Rempel
• [PATCH v4 05/10] ARM: clk: add clk-asm9260 driver   Oleksij Rempel
• [PATCH v4 06/10] clocksource: add asm9260_timer driver   Oleksij Rempel
• [PATCH v4 07/10] tty/serial/mxs-auart.c: add initial Alphascale ASM9260 support   Oleksij Rempel
• [PATCH v4 08/10] add Alphascale to vendor-prefixes.txt   Oleksij Rempel
• [PATCH v4 09/10] irqchip: mxs: prepare driver for HW with different offsets   Oleksij Rempel
• [PATCH v4 10/10] irqchip: mxs: add Alpascale ASM9260 support   Oleksij Rempel
• [PATCH v5 01/10] ARM: add mach-asm9260   Oleksij Rempel
• [PATCH v4 08/10] add Alphascale to vendor-prefixes.txt   Oleksij Rempel
• [PATCH v5 00/10] initial suport for Alphascale ASM9260   Oleksij Rempel
• [PATCH v5 01/10] ARM: add mach-asm9260   Oleksij Rempel
• [PATCH v5 02/10] ARM: add lolevel debug support for asm9260   Oleksij Rempel
• [PATCH v5 03/10] ARM: clk: add clk-asm9260 driver   Oleksij Rempel
• [PATCH v5 04/10] ARM: irqchip: mxs: prepare driver for HW with different offsets   Oleksij Rempel
• [PATCH v5 05/10] ARM: irqchip: mxs: add Alpascale ASM9260 support   Oleksij Rempel
• [PATCH v5 06/10] ARM: clocksource: add asm9260_timer driver   Oleksij Rempel
• [PATCH v5 07/10] ARM: tty: mxs-auart: add initial Alphascale ASM9260 support   Oleksij Rempel
• [PATCH v5 08/10] ARM: dts: add DT for Alphascale ASM9260 SoC   Oleksij Rempel
• [PATCH v5 09/10] ARM: add alphascale,acc.txt bindings documentation   Oleksij Rempel
• [PATCH v5 10/10] add Alphascale to vendor-prefixes.txt   Oleksij Rempel
• [PATCH v5 06/10] ARM: clocksource: add asm9260_timer driver   Oleksij Rempel
• [PATCH v6] ARM: clocksource: add asm9260_timer driver   Oleksij Rempel
• [PATCH v6 00/10] initial suport for Alphascale ASM9260   Oleksij Rempel
• [PATCH v6 01/10] ARM: add mach-asm9260   Oleksij Rempel
• [PATCH v6 02/10] ARM: add lolevel debug support for asm9260   Oleksij Rempel
• [PATCH v6 03/10] ARM: clk: add clk-asm9260 driver   Oleksij Rempel
• [PATCH v6 04/10] ARM: irqchip: mxs: prepare driver for HW with different offsets   Oleksij Rempel
• [PATCH v6 05/10] ARM: irqchip: mxs: add Alpascale ASM9260 support   Oleksij Rempel
• [PATCH v6 06/10] ARM: clocksource: add asm9260_timer driver   Oleksij Rempel
• [PATCH v6 07/10] ARM: tty: mxs-auart: add initial Alphascale ASM9260 support   Oleksij Rempel
• [PATCH v6 08/10] ARM: dts: add DT for Alphascale ASM9260 SoC   Oleksij Rempel
• [PATCH v6 09/10] ARM: add alphascale,acc.txt bindings documentation   Oleksij Rempel
• [PATCH v6 10/10] add Alphascale to vendor-prefixes.txt   Oleksij Rempel
• [PATCH v6 02/10] ARM: add lolevel debug support for asm9260   Oleksij Rempel
• [PATCH v7 00/10] initial suport for Alphascale ASM9260   Oleksij Rempel
• [PATCH v7 01/10] ARM: add mach-asm9260   Oleksij Rempel
• [PATCH v7 02/10] ARM: add lolevel debug support for asm9260   Oleksij Rempel
• [PATCH v7 03/10] ARM: clk: add clk-asm9260 driver   Oleksij Rempel
• [PATCH v7 04/10] ARM: irqchip: mxs: prepare driver for HW with different offsets   Oleksij Rempel
• [PATCH v7 05/10] ARM: irqchip: mxs: add Alpascale ASM9260 support   Oleksij Rempel
• [PATCH v7 06/10] ARM: clocksource: add asm9260_timer driver   Oleksij Rempel
• [PATCH v7 07/10] ARM: tty: mxs-auart: add initial Alphascale ASM9260 support   Oleksij Rempel
• [PATCH v7 08/10] ARM: dts: add DT for Alphascale ASM9260 SoC   Oleksij Rempel
• [PATCH v7 09/10] ARM: add alphascale,acc.txt bindings documentation   Oleksij Rempel
• [PATCH v7 10/10] add Alphascale to vendor-prefixes.txt   Oleksij Rempel
• [PATCH v7 05/10] ARM: irqchip: mxs: add Alpascale ASM9260 support   Oleksij Rempel
• [PATCH v7 02/10] ARM: add lolevel debug support for asm9260   Oleksij Rempel
• [PATCH v7 05/10] ARM: irqchip: mxs: add Alpascale ASM9260 support   Oleksij Rempel
• [PATCH v8 0/9] initial suport for Alphascale ASM9260   Oleksij Rempel
• [PATCH v8 1/9] ARM: add mach-asm9260   Oleksij Rempel
• [PATCH v8 2/9] ARM: add lolevel debug support for asm9260   Oleksij Rempel
• [PATCH v8 3/9] ARM: clk: add clk-asm9260 driver   Oleksij Rempel
• [PATCH v8 4/9] ARM: irqchip: mxs: prepare driver for HW with different offsets   Oleksij Rempel
• [PATCH v8 5/9] ARM: irqchip: mxs: add Alpascale ASM9260 support   Oleksij Rempel
• [PATCH v8 6/9] ARM: clocksource: add asm9260_timer driver   Oleksij Rempel
• [PATCH v8 7/9] ARM: dts: add DT for Alphascale ASM9260 SoC   Oleksij Rempel
• [PATCH v8 8/9] ARM: add alphascale,acc.txt bindings documentation   Oleksij Rempel
• [PATCH v8 9/9] add Alphascale to vendor-prefixes.txt   Oleksij Rempel
• [PATCH] add Alphascale to vendor-prefixes.txt   Oleksij Rempel
• [PATCH] add Alphascale to vendor-prefixes.txt   Oleksij Rempel
• [PATCH v8 0/9] initial suport for Alphascale ASM9260   Oleksij Rempel
• [PATCH 0/2] initial suport for Alphascale ASM9260   Oleksij Rempel
• [PATCH 1/2] ARM: add mach-asm9260   Oleksij Rempel
• [PATCH 2/2] ARM: add lolevel debug support for asm9260   Oleksij Rempel
• [PATCH 1/2] ARM: add mach-asm9260   Oleksij Rempel
• [PATCH 1/2] ARM: add mach-asm9260   Oleksij Rempel
• [PATCH 1/2] ARM: add mach-asm9260   Oleksij Rempel
• [PATCH 1/2 v2] ARM: add mach-asm9260   Oleksij Rempel
• [PATCH 0/2] initial suport for Alphascale ASM9260   Oleksij Rempel
• [PATCH 1/2 v2] ARM: add mach-asm9260   Oleksij Rempel
• [PATCH 2/2] ARM: add lolevel debug support for asm9260   Oleksij Rempel
• [PATCH 0/2] initial suport for Alphascale ASM9260   Oleksij Rempel
• [PATCH v3 0/2] initial suport for Alphascale ASM9260   Oleksij Rempel
• [PATCH v3 1/2] ARM: add mach-asm9260   Oleksij Rempel
• [PATCH v3 2/2] ARM: add lolevel debug support for asm9260   Oleksij Rempel
• [PATCH v3 0/4] arm64, thunder: Enable Cavium Thunder SoC Family   Robert Richter
• [GIT PULL] arm64, thunder: Enable Cavium Thunder SoC Family   Robert Richter
• [GIT PULL] dts, kbuild: Implement support for dtb vendor subdirs   Robert Richter
• [GIT PULL] arm64, thunder: Enable Cavium Thunder SoC Family   Robert Richter
• [PATCH 3/6] pci, thunder: Add PCIe host controller devicetree bindings   Robert Richter
• [PATCH v13 00/12] Support for creating generic PCI host bridges from DT   Robert Richter
• [PATCH 3/6] pci, thunder: Add PCIe host controller devicetree bindings   Robert Richter
• [PATCH v13 00/12] Support for creating generic PCI host bridges from DT   Robert Richter
• [PATCH 3/6] pci, thunder: Add PCIe host controller devicetree bindings   Robert Richter
• [GIT PULL] dts, kbuild: Implement support for dtb vendor subdirs   Robert Richter
• [GIT PULL] dts, kbuild: Implement support for dtb vendor subdirs   Robert Richter
• [GIT PULL] dts, kbuild: Implement support for dtb vendor subdirs   Robert Richter
• [PATCH] VNIC: Adding support for Cavium ThunderX network controller   Robert Richter
• [PATCH 06/12] ARM: tegra: Add memory controller support for Tegra20   David Riley
• [PATCH] mailbox: Enable BCM2835 mailbox support   Lubomir Rintel
• [PATCH] bcm2835: add VideoCore Mailbox to the device tree   Lubomir Rintel
• [PATCH 6/9] dmaengine: Create a generic dma_slave_caps callback   Maxime Ripard
• [PATCH 7/9] dmaengine: Move slave caps to dma_device   Maxime Ripard
• [PATCH 2/9] dmaengine: Make channel allocation callbacks optional   Maxime Ripard
• [PATCH v2 1/7] ARM: sunxi: Introduce Allwinner A80 support   Maxime Ripard
• [PATCH v2 4/7] ARM: dts: sun9i: Add A80 Optimus Board support   Maxime Ripard
• [PATCH v2 0/3] ARM: dts: sun7i: Add Banana Pi board   Maxime Ripard
• [PATCH 1/2] ARM: dts: sun7i: Add mmc2_pins_a pinctrl definition   Maxime Ripard
• [PATCH 2/2] ARM: dts: sun7i: Add Mele M3 board   Maxime Ripard
• [PATCH] ARM: sun7i: add support for A20-OLinuXino-Lime2   Maxime Ripard
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Maxime Ripard
• [PATCH 0/3] ARM: Meson6: enable SMP   Maxime Ripard
• [PATCH 0/3] ARM: Meson6: enable SMP   Maxime Ripard
• [PATCH 0/3] ARM: Meson6: enable SMP   Maxime Ripard
• [PATCH v2 1/7] clk: sunxi: Specify number of child clocks for divs clocks   Maxime Ripard
• [PATCH 1/5] ARM: sun4i: Relicense the A10 DTSI under GPLv2/X11   Maxime Ripard
• [PATCH v2 5/5] simplefb: add clock handling code   Maxime Ripard
• [PATCH] ARM: sun7i: add support for A20-OLinuXino-Lime2   Maxime Ripard
• [PATCH v3 ] ARM: sun7i: add support for A20-OLinuXino-Lime2   Maxime Ripard
• [linux-sunxi] Re: [PATCH v2 5/5] simplefb: add clock handling code   Maxime Ripard
• [PATCH 3/3] ARM: sun7i: cubieboard2: Enable the AXP209   Maxime Ripard
• [PATCH 3/3] ARM: sun7i: cubieboard2: Enable the AXP209   Maxime Ripard
• [PATCH v2 2/2] Documentation: dmaengine: Add a documentation for the dma controller API   Maxime Ripard
• [PATCH v2 2/2] Documentation: dmaengine: Add a documentation for the dma controller API   Maxime Ripard
• [PATCH v2 1/7] ARM: sunxi: Introduce Allwinner A80 support   Maxime Ripard
• [PATCH v2 4/7] ARM: dts: sun9i: Add A80 Optimus Board support   Maxime Ripard
• [PATCH 1/5] ARM: sun4i: Relicense the A10 DTSI under GPLv2/X11   Maxime Ripard
• [PATCH v4] ARM: sun7i: add support for A20-OLinuXino-Lime2   Maxime Ripard
• [PATCH v5] ARM: sun7i: add support for A20-OLinuXino-Lime2   Maxime Ripard
• [PATCH v4] ARM: sun7i: add support for A20-OLinuXino-Lime2   Maxime Ripard
• [PATCH v3 0/5] ARM: sunxi: Add basic support for Allwinner A80 SoC   Maxime Ripard
• [PATCH v3 0/5] ARM: sunxi: Add basic support for Allwinner A80 SoC   Maxime Ripard
• [PATCH v2 7/7] ARM: dts: sun6i: Add required ahb1 clock parent and rates for dma controller   Maxime Ripard
• [PATCH 0/7] clk: sun6i: Unify AHB1 clock and fix rate calculation   Maxime Ripard
• [PATCH] ARM: sunxi_defconfig: enable CONFIG_REGULATOR   Maxime Ripard
• [PATCH 2/5] clk: sunxi: Add support for A80 basic bus clocks   Maxime Ripard
• [PATCH 4/5] ARM: sunxi: Select ARCH_HAS_RESET_CONTROLLER and RESET_CONTROLLER for sun9i   Maxime Ripard
• [PATCH 00/11] dmaengine: Cleanup chancnt   Maxime Ripard
• [PATCH 01/11] dmaengine: pl08x: Remove chancnt affectations   Maxime Ripard
• [PATCH 02/11] dmaengine: bcm2835: Remove chancnt affectations   Maxime Ripard
• [PATCH 03/11] dmaengine: jz4740: Remove chancnt affectations   Maxime Ripard
• [PATCH 04/11] dmaengine: fsldma: Remove chancnt affectations   Maxime Ripard
• [PATCH 05/11] dmaengine: k3: Remove chancnt affectations   Maxime Ripard
• [PATCH 06/11] dmaengine: mpc512x: Remove chancnt affectations   Maxime Ripard
• [PATCH 07/11] dmaengine: omap: Remove chancnt affectations   Maxime Ripard
• [PATCH 08/11] dmaengine: sa11x0: Remove chancnt affectations   Maxime Ripard
• [PATCH 09/11] dmaengine: sh: Remove chancnt affectations   Maxime Ripard
• [PATCH 10/11] dmaengine: sirf: Remove chancnt affectations   Maxime Ripard
• [PATCH 11/11] dmaengine: sun6i: Remove chancnt affectations   Maxime Ripard
• [PATCH v2 00/53] dmaengine: Implement generic slave capabilities retrieval   Maxime Ripard
• [PATCH v2 01/53] dmaengine: Make the destination abbreviation coherent   Maxime Ripard
• [PATCH v2 02/53] dmaengine: Make channel allocation callbacks optional   Maxime Ripard
• [PATCH v2 03/53] dmaengine: Introduce a device_config callback   Maxime Ripard
• [PATCH v2 04/53] dmaengine: split out pause/resume operations from device_control   Maxime Ripard
• [PATCH v2 05/53] dmaengine: Add device_terminate_all callback   Maxime Ripard
• [PATCH v2 06/53] dmaengine: Create a generic dma_slave_caps callback   Maxime Ripard
• [PATCH v2 07/53] dmaengine: Move slave caps to dma_device   Maxime Ripard
• [PATCH v2 08/53] dmaengine: pl08x: Split device_control   Maxime Ripard
• [PATCH v2 09/53] dmaengine: hdmac: Split device_control   Maxime Ripard
• [PATCH v2 10/53] dmaengine: bcm2835: Split device_control   Maxime Ripard
• [PATCH v2 11/53] dmaengine: coh901318: Split device_control   Maxime Ripard
• [PATCH v2 12/53] dmaengine: cppi41: Split device_control   Maxime Ripard
• [PATCH v2 13/53] dmaengine: jz4740: Split device_control   Maxime Ripard
• [PATCH v2 14/53] dmaengine: dw: Split device_control   Maxime Ripard
• [PATCH v2 15/53] dmaengine: edma: Split device_control   Maxime Ripard
• [PATCH v2 16/53] dmaengine: ep93xx: Split device_control   Maxime Ripard
• [PATCH v2 17/53] dmaengine: fsl-edma: Split device_control   Maxime Ripard
• [PATCH v2 18/53] dmaengine: imx: Split device_control   Maxime Ripard
• [PATCH v2 19/53] dmaengine: imx-sdma: Split device_control   Maxime Ripard
• [PATCH v2 20/53] dmaengine: intel-mid-dma: Split device_control   Maxime Ripard
• [PATCH v2 21/53] dmaengine: ipu-idmac: Split device_control   Maxime Ripard
• [PATCH v2 22/53] dmaengine: k3: Split device_control   Maxime Ripard
• [PATCH v2 23/53] dmaengine: mmp-pdma: Split device_control   Maxime Ripard
• [PATCH v2 24/53] dmaengine: mmp-tdma: Split device_control   Maxime Ripard
• [PATCH v2 25/53] dmaengine: moxart: Split device_control   Maxime Ripard
• [PATCH v2 26/53] dmaengine: fsl-dma: Split device_control   Maxime Ripard
• [PATCH v2 27/53] dmaengine: mpc512x: Split device_control   Maxime Ripard
• [PATCH v2 28/53] dmaengine: mxs: Split device_control   Maxime Ripard
• [PATCH v2 29/53] dmaengine: nbpfaxi: Split device_control   Maxime Ripard
• [PATCH v2 30/53] dmaengine: omap: Split device_control   Maxime Ripard
• [PATCH v2 31/53] dmaengine: pl330: Split device_control   Maxime Ripard
• [PATCH v2 32/53] dmaengine: bam-dma: Split device_control   Maxime Ripard
• [PATCH v2 33/53] dmaengine: s3c24xx: Split device_control   Maxime Ripard
• [PATCH v2 34/53] dmaengine: sa11x0: Split device_control   Maxime Ripard
• [PATCH v2 35/53] dmaengine: sh: Split device_control   Maxime Ripard
• [PATCH v2 36/53] dmaengine: sirf: Split device_control   Maxime Ripard
• [PATCH v2 37/53] dmaengine: sun6i: Split device_control   Maxime Ripard
• [PATCH v2 38/53] dmaengine: d40: Split device_control   Maxime Ripard
• [PATCH v2 39/53] dmaengine: tegra20: Split device_control   Maxime Ripard
• [PATCH v2 40/53] dmaengine: xilinx: Split device_control   Maxime Ripard
• [PATCH v2 41/53] dmaengine: mv_xor: Remove device_control   Maxime Ripard
• [PATCH v2 42/53] dmaengine: pch-dma: Rename device_control   Maxime Ripard
• [PATCH v2 43/53] dmaengine: td: Rename device_control   Maxime Ripard
• [PATCH v2 44/53] dmaengine: txx9: Rename device_control   Maxime Ripard
• [PATCH v2 45/53] dmaengine: bcm2835: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v2 46/53] dmaengine: fsl-edma: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v2 47/53] dmaengine: edma: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v2 48/53] dmaengine: nbpfaxi: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v2 49/53] dmaengine: omap: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v2 50/53] dmaengine: pl330: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v2 51/53] dmaengine: sirf: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v2 52/53] dmaengine: sun6i: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v2 53/53] dmaengine: Mark device_control and device_slave_caps as deprecated   Maxime Ripard
• [PATCH] ARM: sunxi_defconfig: enable CONFIG_REGULATOR   Maxime Ripard
• [PATCH v2 14/53] dmaengine: dw: Split device_control   Maxime Ripard
• [PATCH v2 06/53] dmaengine: Create a generic dma_slave_caps callback   Maxime Ripard
• [PATCH 01/26] ARM: sunxi: Fix GPLv2 wording   Maxime Ripard
• [PATCH 02/26] ARM: sunxi: regulators: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 03/26] ARM: sun4i: a1000: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 04/26] ARM: sun4i: ba10: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 05/26] ARM: sun4i: cubieboard: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 06/26] ARM: sun4i: hackberry: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 07/26] ARM: sun4i: inet97fv2: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 08/26] ARM: sun4i: mini xplus: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 09/26] ARM: sun4i: olinuxino lime: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 10/26] ARM: sun4i: olinuxino lime: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 11/26] ARM: sun5i: olinuxino micro: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 12/26] ARM: sun5i: r7: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 13/26] ARM: sun5i: olinuxino: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 14/26] ARM: sun5i: olinuxino micro: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 15/26] ARM: sun6i: app4: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 16/26] ARM: sun6i: colombus: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 17/26] ARM: sun6i: hummingbird: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 18/26] ARM: sun6i: m9: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 19/26] ARM: sun7i: cubieboard2: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 20/26] ARM: sun7i: cubietruck: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 21/26] ARM: sun7i: hummingbird: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 22/26] ARM: sun7i: hummingbird: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 23/26] ARM: sun7i: olinuxino lime: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 24/26] ARM: sun7i: olinuxino micro: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 25/26] ARM: sun7i: pcduino3: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 26/26] ARM: sun8i: q8h: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH v2 2/2] Documentation: dmaengine: Add a documentation for the dma controller API   Maxime Ripard
• [PATCH 2/5] clk: sunxi: Add support for A80 basic bus clocks   Maxime Ripard
• [PATCH 2/5] clk: sunxi: Add support for A80 basic bus clocks   Maxime Ripard
• [PATCH v2 1/4] input: Add new sun4i-lradc-keys driver   Maxime Ripard
• [PATCH 02/26] ARM: sunxi: regulators: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 04/26] ARM: sun4i: ba10: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 06/26] ARM: sun4i: hackberry: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 07/26] ARM: sun4i: inet97fv2: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 08/26] ARM: sun4i: mini xplus: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 09/26] ARM: sun4i: olinuxino lime: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 14/26] ARM: sun5i: olinuxino micro: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 12/26] ARM: sun5i: r7: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 11/26] ARM: sun5i: olinuxino micro: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 16/26] ARM: sun6i: colombus: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 17/26] ARM: sun6i: hummingbird: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 18/26] ARM: sun6i: m9: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 22/26] ARM: sun7i: hummingbird: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 26/26] ARM: sun8i: q8h: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator   Maxime Ripard
• [RFC Patch 1/4] mfd: AXP20x: Add power supply bindings documentation   Maxime Ripard
• [PATCH v2 1/5] clk: sunxi: make factors clock mux mask configurable   Maxime Ripard
• [PATCH v2 2/5] clk: sunxi: Add support for A80 basic bus clocks   Maxime Ripard
• [PATCH v2 3/5] clk: sunxi: Add support for bus clock gates on Allwinner A80 SoC   Maxime Ripard
• [PATCH v2 5/5] ARM: dts: sun9i: Add basic clocks and reset controls   Maxime Ripard
• [RFC Patch 1/4] mfd: AXP20x: Add power supply bindings documentation   Maxime Ripard
• [RFC Patch 2/4] mfd: AXP20x: Add power supply sub-driver   Maxime Ripard
• [PATCH v7 0/6] mfd: AXP20x: Add support for AXP202 and AXP209   Maxime Ripard
• [PATCH v2 4/4] ARM: dts: sun7i: Add lradc node   Maxime Ripard
• [PATCH v3 00/59] dmaengine: Implement generic slave capabilities retrieval   Maxime Ripard
• [PATCH v3 01/59] crypto: ux500: Use dmaengine_terminate_all API   Maxime Ripard
• [PATCH v3 02/59] serial: at91: Use dmaengine_slave_config API   Maxime Ripard
• [PATCH v3 03/59] dmaengine: Make the destination abbreviation coherent   Maxime Ripard
• [PATCH v3 04/59] dmaengine: Rework dma_chan_get   Maxime Ripard
• [PATCH v3 05/59] dmaengine: Make channel allocation callbacks optional   Maxime Ripard
• [PATCH v3 06/59] dmaengine: Introduce a device_config callback   Maxime Ripard
• [PATCH v3 07/59] dmaengine: split out pause/resume operations from device_control   Maxime Ripard
• [PATCH v3 08/59] dmaengine: Add device_terminate_all callback   Maxime Ripard
• [PATCH v3 09/59] dmaengine: Remove the need to declare device_control   Maxime Ripard
• [PATCH v3 10/59] dmaengine: Create a generic dma_slave_caps callback   Maxime Ripard
• [PATCH v3 11/59] dmaengine: Move slave caps to dma_device   Maxime Ripard
• [PATCH v3 12/59] dmaengine: pl08x: Split device_control   Maxime Ripard
• [PATCH v3 13/59] dmaengine: hdmac: Split device_control   Maxime Ripard
• [PATCH v3 14/59] dmaengine: bcm2835: Split device_control   Maxime Ripard
• [PATCH v3 15/59] dmaengine: coh901318: Split device_control   Maxime Ripard
• [PATCH v3 16/59] dmaengine: cppi41: Split device_control   Maxime Ripard
• [PATCH v3 17/59] dmaengine: jz4740: Split device_control   Maxime Ripard
• [PATCH v3 18/59] dmaengine: dw: Split device_control   Maxime Ripard
• [PATCH v3 19/59] dmaengine: edma: Split device_control   Maxime Ripard
• [PATCH v3 20/59] dmaengine: ep93xx: Split device_control   Maxime Ripard
• [PATCH v3 21/59] dmaengine: fsl-edma: Split device_control   Maxime Ripard
• [PATCH v3 22/59] dmaengine: imx: Split device_control   Maxime Ripard
• [PATCH v3 23/59] dmaengine: imx-sdma: Split device_control   Maxime Ripard
• [PATCH v3 24/59] dmaengine: intel-mid-dma: Split device_control   Maxime Ripard
• [PATCH v3 25/59] dmaengine: ipu-idmac: Split device_control   Maxime Ripard
• [PATCH v3 26/59] dmaengine: k3: Split device_control   Maxime Ripard
• [PATCH v3 27/59] dmaengine: mmp-pdma: Split device_control   Maxime Ripard
• [PATCH v3 28/59] dmaengine: mmp-tdma: Split device_control   Maxime Ripard
• [PATCH v3 29/59] dmaengine: moxart: Split device_control   Maxime Ripard
• [PATCH v3 30/59] dmaengine: fsl-dma: Split device_control   Maxime Ripard
• [PATCH v3 31/59] dmaengine: mpc512x: Split device_control   Maxime Ripard
• [PATCH v3 32/59] dmaengine: mxs: Split device_control   Maxime Ripard
• [PATCH v3 33/59] dmaengine: nbpfaxi: Split device_control   Maxime Ripard
• [PATCH v3 34/59] dmaengine: omap: Split device_control   Maxime Ripard
• [PATCH v3 35/59] dmaengine: pl330: Split device_control   Maxime Ripard
• [PATCH v3 36/59] dmaengine: bam-dma: Split device_control   Maxime Ripard
• [PATCH v3 37/59] dmaengine: s3c24xx: Split device_control   Maxime Ripard
• [PATCH v3 38/59] dmaengine: sa11x0: Split device_control   Maxime Ripard
• [PATCH v3 39/59] dmaengine: sh: Split device_control   Maxime Ripard
• [PATCH v3 40/59] dmaengine: sirf: Split device_control   Maxime Ripard
• [PATCH v3 41/59] dmaengine: sun6i: Split device_control   Maxime Ripard
• [PATCH v3 42/59] dmaengine: d40: Split device_control   Maxime Ripard
• [PATCH v3 43/59] dmaengine: tegra20: Split device_control   Maxime Ripard
• [PATCH v3 44/59] dmaengine: xilinx: Split device_control   Maxime Ripard
• [PATCH v3 45/59] dmaengine: mv_xor: Remove device_control   Maxime Ripard
• [PATCH v3 46/59] dmaengine: pch-dma: Rename device_control   Maxime Ripard
• [PATCH v3 47/59] dmaengine: td: Rename device_control   Maxime Ripard
• [PATCH v3 48/59] dmaengine: txx9: Rename device_control   Maxime Ripard
• [PATCH v3 49/59] dmaengine: rapidio: tsi721: Rename device_control   Maxime Ripard
• [PATCH v3 50/59] dmaengine: bcm2835: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v3 51/59] dmaengine: fsl-edma: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v3 52/59] dmaengine: edma: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v3 53/59] dmaengine: nbpfaxi: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v3 54/59] dmaengine: omap: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v3 55/59] dmaengine: pl330: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v3 56/59] dmaengine: sirf: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v3 57/59] dmaengine: sun6i: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v3 58/59] dmaengine: Add a warning for drivers not using the generic slave caps retrieval   Maxime Ripard
• [PATCH v3 59/59] dmaengine: Remove device_control and device_slave_caps   Maxime Ripard
• [PATCH v3 1/4] input: Add new sun4i-lradc-keys driver   Maxime Ripard
• [PATCH v2 06/53] dmaengine: Create a generic dma_slave_caps callback   Maxime Ripard
• [RFC Patch 2/4] mfd: AXP20x: Add power supply sub-driver   Maxime Ripard
• [PATCH v3 58/59] dmaengine: Add a warning for drivers not using the generic slave caps retrieval   Maxime Ripard
• [PATCH v3 58/59] dmaengine: Add a warning for drivers not using the generic slave caps retrieval   Maxime Ripard
• [PATCH 0/4] pinctrl: sunxi: Add A80 Pin Controller support   Maxime Ripard
• [PATCH 1/4] pinctrl: sunxi: Add PN bank base pin   Maxime Ripard
• [PATCH 2/4] pinctrl: sunxi: Add A80 pinctrl muxing options   Maxime Ripard
• [PATCH 3/4] ARM: sun9i: Enable the A80 pinctrl driver   Maxime Ripard
• [PATCH 4/4] ARM: sun9i: optimus: Set UART0 muxing   Maxime Ripard
• [PATCH 01/26] ARM: sunxi: Fix GPLv2 wording   Maxime Ripard
• [PATCH 15/26] ARM: sun6i: app4: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 01/26] ARM: sunxi: Fix GPLv2 wording   Maxime Ripard
• [PATCH v2 0/8] ARM: at91: Remove mach/ includes from the reset driver   Maxime Ripard
• [PATCH v2 0/8] ARM: at91: Remove mach/ includes from the reset driver   Maxime Ripard
• [PATCH 03/26] ARM: sun4i: a1000: Relicense the device tree under GPLv2/X11   Maxime Ripard
• [PATCH 4/6] ARM: dts: sun9i: Add GPIO LEDs for A80 Optimus board   Maxime Ripard
• [linux-sunxi] [PATCH 4/6] ARM: dts: sun9i: Add GPIO LEDs for A80 Optimus board   Maxime Ripard
• [PATCH v3 0/2] dmaengine: Add driver documentation   Maxime Ripard
• [PATCH v3 1/2] Documentation: dmaengine: Move the current doc to a folder of its own   Maxime Ripard
• [PATCH v3 2/2] Documentation: dmaengine: Add a documentation for the dma controller API   Maxime Ripard
• [RFC 0/3] ARM: sun9i: Add PRCM clocks and reset controls support   Maxime Ripard
• [PATCH v3 0/2] dmaengine: Add driver documentation   Maxime Ripard
• [PATCH v4 00/58] dmaengine: Implement generic slave capabilities retrieval   Maxime Ripard
• [PATCH v4 01/58] crypto: ux500: Use dmaengine_terminate_all API   Maxime Ripard
• [PATCH v4 02/58] serial: at91: Use dmaengine_slave_config API   Maxime Ripard
• [PATCH v4 03/58] dmaengine: Make the destination abbreviation coherent   Maxime Ripard
• [PATCH v4 04/58] dmaengine: Rework dma_chan_get   Maxime Ripard
• [PATCH v4 05/58] dmaengine: Make channel allocation callbacks optional   Maxime Ripard
• [PATCH v4 06/58] dmaengine: Introduce a device_config callback   Maxime Ripard
• [PATCH v4 07/58] dmaengine: split out pause/resume operations from device_control   Maxime Ripard
• [PATCH v4 08/58] dmaengine: Add device_terminate_all callback   Maxime Ripard
• [PATCH v4 09/58] dmaengine: Remove the need to declare device_control   Maxime Ripard
• [PATCH v4 10/58] dmaengine: Create a generic dma_slave_caps callback   Maxime Ripard
• [PATCH v4 11/58] dmaengine: pl08x: Split device_control   Maxime Ripard
• [PATCH v4 12/58] dmaengine: hdmac: Split device_control   Maxime Ripard
• [PATCH v4 13/58] dmaengine: bcm2835: Split device_control   Maxime Ripard
• [PATCH v4 14/58] dmaengine: coh901318: Split device_control   Maxime Ripard
• [PATCH v4 15/58] dmaengine: cppi41: Split device_control   Maxime Ripard
• [PATCH v4 16/58] dmaengine: jz4740: Split device_control   Maxime Ripard
• [PATCH v4 17/58] dmaengine: dw: Split device_control   Maxime Ripard
• [PATCH v4 18/58] dmaengine: edma: Split device_control   Maxime Ripard
• [PATCH v4 19/58] dmaengine: ep93xx: Split device_control   Maxime Ripard
• [PATCH v4 20/58] dmaengine: fsl-edma: Split device_control   Maxime Ripard
• [PATCH v4 21/58] dmaengine: imx: Split device_control   Maxime Ripard
• [PATCH v4 22/58] dmaengine: imx-sdma: Split device_control   Maxime Ripard
• [PATCH v4 23/58] dmaengine: intel-mid-dma: Split device_control   Maxime Ripard
• [PATCH v4 24/58] dmaengine: ipu-idmac: Split device_control   Maxime Ripard
• [PATCH v4 25/58] dmaengine: k3: Split device_control   Maxime Ripard
• [PATCH v4 26/58] dmaengine: mmp-pdma: Split device_control   Maxime Ripard
• [PATCH v4 27/58] dmaengine: mmp-tdma: Split device_control   Maxime Ripard
• [PATCH v4 28/58] dmaengine: moxart: Split device_control   Maxime Ripard
• [PATCH v4 29/58] dmaengine: fsl-dma: Split device_control   Maxime Ripard
• [PATCH v4 30/58] dmaengine: mpc512x: Split device_control   Maxime Ripard
• [PATCH v4 31/58] dmaengine: mxs: Split device_control   Maxime Ripard
• [PATCH v4 32/58] dmaengine: nbpfaxi: Split device_control   Maxime Ripard
• [PATCH v4 33/58] dmaengine: omap: Split device_control   Maxime Ripard
• [PATCH v4 34/58] dmaengine: pl330: Split device_control   Maxime Ripard
• [PATCH v4 35/58] dmaengine: bam-dma: Split device_control   Maxime Ripard
• [PATCH v4 36/58] dmaengine: s3c24xx: Split device_control   Maxime Ripard
• [PATCH v4 37/58] dmaengine: sa11x0: Split device_control   Maxime Ripard
• [PATCH v4 38/58] dmaengine: sh: Split device_control   Maxime Ripard
• [PATCH v4 39/58] dmaengine: sirf: Split device_control   Maxime Ripard
• [PATCH v4 40/58] dmaengine: sun6i: Split device_control   Maxime Ripard
• [PATCH v4 41/58] dmaengine: d40: Split device_control   Maxime Ripard
• [PATCH v4 42/58] dmaengine: tegra20: Split device_control   Maxime Ripard
• [PATCH v4 43/58] dmaengine: xilinx: Split device_control   Maxime Ripard
• [PATCH v4 44/58] dmaengine: mv_xor: Remove device_control   Maxime Ripard
• [PATCH v4 45/58] dmaengine: pch-dma: Rename device_control   Maxime Ripard
• [PATCH v4 46/58] dmaengine: td: Rename device_control   Maxime Ripard
• [PATCH v4 47/58] dmaengine: txx9: Rename device_control   Maxime Ripard
• [PATCH v4 48/58] dmaengine: rapidio: tsi721: Rename device_control   Maxime Ripard
• [PATCH v4 49/58] dmaengine: bcm2835: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v4 50/58] dmaengine: fsl-edma: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v4 51/58] dmaengine: edma: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v4 52/58] dmaengine: nbpfaxi: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v4 53/58] dmaengine: omap: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v4 54/58] dmaengine: pl330: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v4 55/58] dmaengine: sirf: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v4 56/58] dmaengine: sun6i: Declare slave capabilities for the generic code   Maxime Ripard
• [PATCH v4 57/58] dmaengine: Add a warning for drivers not using the generic slave caps retrieval   Maxime Ripard
• [PATCH v4 58/58] dmaengine: Remove device_control and device_slave_caps   Maxime Ripard
• [PATCH v2 0/4] pinctrl: sunxi: Add A80 Pin Controller support   Maxime Ripard
• [PATCH v2 1/4] pinctrl: sunxi: Add PN bank base pin   Maxime Ripard
• [PATCH v2 2/4] pinctrl: sunxi: Add A80 pinctrl muxing options   Maxime Ripard
• [PATCH v2 3/4] ARM: sun9i: Enable the A80 pinctrl driver   Maxime Ripard
• [PATCH v2 4/4] ARM: sun9i: optimus: Set UART0 muxing   Maxime Ripard
• [PATCH 1/5] phy: sun4i: add support for USB phy0   Maxime Ripard
• [PATCH 2/5] ARM: dtsi: sunxi: add common VBUS regulator   Maxime Ripard
• [PATCH v2 3/4] ARM: sun9i: Enable the A80 pinctrl driver   Maxime Ripard
• [PATCH 4/6] ARM: dts: sun9i: Add GPIO LEDs for A80 Optimus board   Maxime Ripard
• [PATCH 1/5] phy: sun4i: add support for USB phy0   Maxime Ripard
• [PATCH 2/5] ARM: dtsi: sunxi: add common VBUS regulator   Maxime Ripard
• [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator   Maxime Ripard
• [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator   Maxime Ripard
• [PATCH v2 0/6] ARM: sun9i: Enable extra uarts, leds and i2c controllers   Maxime Ripard
• [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator   Maxime Ripard
• [PATCH v2 2/2] ARM: EXYNOS: PMU: move restart code into pmu driver   Guenter Roeck
• [GIT PULL] some more Rockchip clock changes for 3.18   Guenter Roeck
• [RFC PATCH 10/16] mips: support poweroff through poweroff handler call chain   Guenter Roeck
• [Xen-devel] [RFC PATCH 14/16] x86/xen: support poweroff through poweroff handler call chain   Guenter Roeck
• [RFC PATCH 05/16] arm64: support poweroff through poweroff handler call chain   Guenter Roeck
• [PATCH 01/44] kernel: Add support for poweroff handler call chain   Guenter Roeck
• [PATCH 02/44] memory: emif: Use API function to determine poweroff capability   Guenter Roeck
• [PATCH 03/44] hibernate: Call have_kernel_poweroff instead of checking pm_power_off   Guenter Roeck
• [PATCH 04/44] m68k: Replace mach_power_off with pm_power_off   Guenter Roeck
• [PATCH 05/44] mfd: as3722: Drop reference to pm_power_off from devicetree bindings   Guenter Roeck
• [PATCH 06/44] gpio-poweroff: Drop reference to pm_power_off from devicetree bindings   Guenter Roeck
• [PATCH 07/44] qnap-poweroff: Drop reference to pm_power_off from devicetree bindings   Guenter Roeck
• [PATCH 09/44] mfd: palmas: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 10/44] mfd: axp20x: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 11/44] mfd: retu: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 12/44] mfd: ab8500-sysctrl: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 13/44] mfd: max8907: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 14/44] mfd: tps80031: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 15/44] mfd: dm355evm_msp: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 16/44] mfd: tps6586x: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 17/44] mfd: tps65910: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 18/44] mfd: twl4030-power: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 19/44] ipmi: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 20/44] power/reset: restart-poweroff: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 21/44] power/reset: gpio-poweroff: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 22/44] power/reset: as3722-poweroff: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 23/44] power/reset: qnap-poweroff: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 24/44] power/reset: msm-powroff: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 25/44] power/reset: vexpress-poweroff: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 26/44] x86: iris: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 27/44] x86: apm: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 28/44] x86: olpc: Register xo1 poweroff handler with kernel poweroff handler   Guenter Roeck
• [PATCH 29/44] staging: nvec: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 30/44] acpi: Register poweroff handler with kernel poweroff handler   Guenter Roeck
• [PATCH 32/44] arm64: psci: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 33/44] avr32: atngw100: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 34/44] ia64: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 35/44] m68k: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 36/44] mips: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 37/44] sh: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 38/44] x86: lguest: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 39/44] x86: ce4100: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 40/44] x86: intel-mid: Drop registration of dummy poweroff handlers   Guenter Roeck
• [PATCH 41/44] x86: pmc_atom: Register poweroff handler with kernel poweroff handler   Guenter Roeck
• [PATCH 42/44] efi: Register poweroff handler with kernel poweroff handler   Guenter Roeck
• [PATCH 43/44] hwmon: (ab8500) Call kernel_power_off instead of pm_power_off   Guenter Roeck
• [PATCH 44/44] kernel: Remove pm_power_off   Guenter Roeck
• [PATCH 07/44] qnap-poweroff: Drop reference to pm_power_off from devicetree bindings   Guenter Roeck
• [PATCH 05/44] mfd: as3722: Drop reference to pm_power_off from devicetree bindings   Guenter Roeck
• [PATCH v3 0/2] Handle reboot for Exynos SoC via restart_handler   Guenter Roeck
• [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog   Guenter Roeck
• [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog   Guenter Roeck
• [PATCH 03/44] hibernate: Call have_kernel_poweroff instead of checking pm_power_off   Guenter Roeck
• [PATCH 01/44] kernel: Add support for poweroff handler call chain   Guenter Roeck
• [PATCH 12/44] mfd: ab8500-sysctrl: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 01/44] kernel: Add support for poweroff handler call chain   Guenter Roeck
• [PATCH 12/44] mfd: ab8500-sysctrl: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 12/44] mfd: ab8500-sysctrl: Register with kernel poweroff handler   Guenter Roeck
• [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog   Guenter Roeck
• [PATCH] mfd: ab8500-sysctrl: Drop ab8500_restart   Guenter Roeck
• arm64 non-SMP build error in latest upstream kernel   Guenter Roeck
• [PATCH] arm64: Fix compile error seen in non-SMP builds   Guenter Roeck
• [PATCH] arm64: Fix compile error seen in non-SMP builds   Guenter Roeck
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   Guenter Roeck
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   Guenter Roeck
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   Guenter Roeck
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   Guenter Roeck
• [PATCH 42/44] efi: Register poweroff handler with kernel poweroff handler   Guenter Roeck
• [PATCH 42/44] efi: Register poweroff handler with kernel poweroff handler   Guenter Roeck
• [PATCH] arm64: Fix compile error seen in non-SMP builds   Guenter Roeck
• [PATCH] arm64: Fix compile error seen in non-SMP builds   Guenter Roeck
• [PATCH v2 08/47] kernel: Move pm_power_off to common code   Guenter Roeck
• [PATCH v2 12/47] mfd: ab8500-sysctrl: Register with kernel poweroff handler   Guenter Roeck
• [PATCH v2 35/47] arm: Register with kernel poweroff handler   Guenter Roeck
• [PATCH v2 36/47] arm64: psci: Register with kernel poweroff handler   Guenter Roeck
• [PATCH v2 36/47] arm64: psci: Register with kernel poweroff handler   Guenter Roeck
• [PATCH v2 36/47] arm64: psci: Register with kernel poweroff handler   Guenter Roeck
• [PATCH v2 08/47] kernel: Move pm_power_off to common code   Guenter Roeck
• [PATCH 2/4] watchdog: orion: Use the reference clock on Armada 375 SoC   Guenter Roeck
• [PATCH v2 08/47] kernel: Move pm_power_off to common code   Guenter Roeck
• [PATCH v3 08/47] kernel: Move pm_power_off to common code   Guenter Roeck
• [PATCH v3 12/47] mfd: ab8500-sysctrl: Register with kernel power-off handler   Guenter Roeck
• [PATCH v3 35/47] arm: Register with kernel power-off handler   Guenter Roeck
• [PATCH v3 36/47] arm64: psci: Register with kernel power-off handler   Guenter Roeck
• [PATCH v2 12/47] mfd: ab8500-sysctrl: Register with kernel poweroff handler   Guenter Roeck
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Guenter Roeck
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Guenter Roeck
• [PATCH v2 00/20] rtc: omap: fixes and power-off feature   Guenter Roeck
• [PATCH v5 1/3] iommu/rockchip: rk3288 iommu driver   Joerg Roedel
• [PATCH v5 1/1] iommu-api: Add map_sg/unmap_sg functions   Joerg Roedel
• [PATCH 2/2] iommu: Implement a dummy bus_set_iommu()   Joerg Roedel
• [PATCH v5 1/3] iommu/rockchip: rk3288 iommu driver   Joerg Roedel
• [PATCH 0/3] Rockchip IOMMU driver and devicetree bindings   Joerg Roedel
• [PATCH 05/26] ARM: sun4i: cubieboard: Relicense the device tree under GPLv2/X11   Stefan Roese
• [PATCH] Route keyboard LEDs through the generic LEDs layer.   Pali Rohár
• [PATCH] Route keyboard LEDs through the generic LEDs layer.   Pali Rohár
• USB Ethernet gadget on Nokia n900   Pali Rohár
• USB Ethernet gadget on Nokia n900   Pali Rohár
• USB Ethernet gadget on Nokia n900   Pali Rohár
• USB Ethernet gadget on Nokia n900   Pali Rohár
• USB Ethernet gadget on Nokia n900   Pali Rohár
• Nokia n900 problems in 3.18-rc1 (was Re: USB Ethernet gadget on Nokia n900)   Pali Rohár
• [PATCH v1 1/5] mfd: tps65910: Convert ti, system-power-controller DT property to poweroff-source   PERIER Romain
• [PATCH v1 1/5] mfd: tps65910: Convert ti, system-power-controller DT property to poweroff-source   PERIER Romain
• [PATCH v1 1/5] mfd: tps65910: Convert ti, system-power-controller DT property to poweroff-source   PERIER Romain
• [PATCH v1 2/3] drivers: net: xgene: Add SGMII based 1GbE support   Francois Romieu
• [PATCH] ARM: at91/dt: Fix sama5d3x typos.   Peter Rosin
• Regarding tx-nocache-copy in the Sheevaplug   Lluís Batlle i Rossell
• Regarding tx-nocache-copy in the Sheevaplug   Lluís Batlle i Rossell
• Regarding tx-nocache-copy in the Sheevaplug   Lluís Batlle i Rossell
• Regarding tx-nocache-copy in the Sheevaplug   Lluís Batlle i Rossell
• Regarding tx-nocache-copy in the Sheevaplug   Lluís Batlle i Rossell
• [PATCHv2 5/5] arm64: Trace emulation of AArch32 legacy instructions   Steven Rostedt
• [PATCH] tracing/syscalls: ignore numbers outside NR_syscalls' range   Steven Rostedt
• [PATCH] tracing/syscalls: ignore numbers outside NR_syscalls' range   Steven Rostedt
• [PATCH] tracing/syscalls: ignore numbers outside NR_syscalls' range   Steven Rostedt
• [PATCH] tracing/syscalls: ignore numbers outside NR_syscalls' range   Steven Rostedt
• [GIT PULL] tracing/syscalls: Ignore numbers outside NR_syscalls' range   Steven Rostedt
• [PATCH v2] i2c:at91: add bound checking on SMBus block length bytes   Mark Roszko
• linux-next: build failure after merge of the arm-soc tree   Stephen Rothwell
• linux-next: manual merge of the kbuild tree with the arm-soc tree   Stephen Rothwell
• [PATCH] gcov: add ARM64 to GCOV_PROFILE_ALL   Stephen Rothwell
• [PATCH to be tested] serial: msm_serial: add missing sysrq handling   Frank Rowand
• [PATCH 2/2] tty: serial: msm: Support sysrq on uartDM devices   Frank Rowand
• [PATCH] Revert "ARM: pxa: call debug_ll_io_init for earlyprintk"   Andrew Ruder
• [PATCH] Revert "ARM: pxa: call debug_ll_io_init for earlyprintk"   Andrew Ruder
• [PATCH] Revert "ARM: pxa: call debug_ll_io_init for earlyprintk"   Andrew Ruder
• [PATCH] Revert "ARM: pxa: call debug_ll_io_init for earlyprintk"   Andrew Ruder
• [PATCH v2 2/3] ARM: vfp: Fix VFPv3 hwcap detection on CPUID based cpus   Måns Rullgård
• [PATCH] aarch64: filter $x from kallsyms   Rusty Russell
• [PATCH 1/6] Documentation: DT: Add bindings for Spreadtrum serial   Mark Rutland
• [PATCH 2/6] arm64: Add DTS support for Spreadtrum's Shark64 SoC   Mark Rutland
• [PATCH 6/7] arm64/kexec: Add core kexec support   Mark Rutland
• [PATCH 6/7] arm64/kexec: Add core kexec support   Mark Rutland
• [PATCH 6/7] arm64/kexec: Add core kexec support   Mark Rutland
• [PATCH 6/7] arm64/kexec: Add core kexec support   Mark Rutland
• [PATCH 6/7] arm64/kexec: Add core kexec support   Mark Rutland
• [PATCH] PCI: xilinx: Trivial fix in DT example   Mark Rutland
• [PATCH] ARM: dts: add board dts file for Exynos3250-based Monk board   Mark Rutland
• [PATCH 6/7] arm64/kexec: Add core kexec support   Mark Rutland
• [PATCH 1/7] arm64/kvm: Fix assembler compatibility of macros   Mark Rutland
• [PATCH 2/7] arm64: Convert hcalls to use ISS field   Mark Rutland
• [RFC PATCH 1/4] arm64: defconfig: increase NR_CPUS range to 2-128   Mark Rutland
• [RFC PATCH 2/4] arm/arm64:dt:numa: adding numa node mapping for memory nodes.   Mark Rutland
• [RFC PATCH 3/4] arm64:thunder: Add initial dts for Cavium Thunder SoC in 2 Node topology.   Mark Rutland
• [RFC PATCH 4/4] arm64:numa: adding numa support for arm64 platforms.   Mark Rutland
• [PATCH v2 3/6] dtb: Add 10GbE node to APM X-Gene SoC device tree   Mark Rutland
• [PATCH 1/7] arm64/kvm: Fix assembler compatibility of macros   Mark Rutland
• [PATCH 2/7] arm64: Convert hcalls to use ISS field   Mark Rutland
• [RFC PATCH 2/4] arm/arm64:dt:numa: adding numa node mapping for memory nodes.   Mark Rutland
• [RFC PATCH 4/4] arm64:numa: adding numa support for arm64 platforms.   Mark Rutland
• [PATCH v7 04/11] pwm: add DT bindings documentation for atmel-hlcdc-pwm driver   Mark Rutland
• [PATCH v3] clocksource: arch_timer: Allow the device tree to specify uninitialized CNTVOFF   Mark Rutland
• [PATCH 05/44] mfd: as3722: Drop reference to pm_power_off from devicetree bindings   Mark Rutland
• [PATCH 07/44] qnap-poweroff: Drop reference to pm_power_off from devicetree bindings   Mark Rutland
• [PATCH 06/44] gpio-poweroff: Drop reference to pm_power_off from devicetree bindings   Mark Rutland
• [PATCH v3] clocksource: arch_timer: Fix code to use physical timers when requested   Mark Rutland
• [PATCH v3 1/4] Documentation: devicetree: bindings: Document correct and deprecated vendor-prefix with device isl29028   Mark Rutland
• [PATCH v3 2/4] Documentation: devicetree: bindings: Document deprecated device vendor name to fix related warning   Mark Rutland
• [PATCH v3 4/4] arch: arm: boot: dts: Added correct vendor-prefix with device name to compatible property   Mark Rutland
• [PATCH v3 3/4] Staging: iio: light: Added correct vendor-prefix for device isl29028   Mark Rutland
• [PATCH v3 1/4] Documentation: devicetree: bindings: Document correct and deprecated vendor-prefix with device isl29028   Mark Rutland
• [PATCH v3 4/4] arch: arm: boot: dts: Added correct vendor-prefix with device name to compatible property   Mark Rutland
• [PATCH v1] Arm64: ASLR: fix text randomization   Mark Rutland
• [PATCH 0/7] arm64 kexec kernel patches V3   Mark Rutland
• [PATCH 0/7] arm64 kexec kernel patches V3   Mark Rutland
• [PATCH v4 1/4] Documentation: devicetree: bindings: Document correct and deprecated vendor-prefix with device isl29028   Mark Rutland
• [PATCH 05/44] mfd: as3722: Drop reference to pm_power_off from devicetree bindings   Mark Rutland
• [PATCH 6/7] arm64/kexec: Add core kexec support   Mark Rutland
• [PATCH 0/7] arm64 kexec kernel patches V3   Mark Rutland
• [PATCH 2/6] Documentation: mailbox: Add APM X-Gene SLIMpro mailbox dts documentation   Mark Rutland
• [PATCH 0/7] arm64 kexec kernel patches V3   Mark Rutland
• [PATCH 5/6] Documentation: i2c: Add APM X-Gene platform SLIMpro I2C driver documentation   Mark Rutland
• [PATCH v1 0/3] gpio: Add APM X-Gene standy platform GPIO driver   Mark Rutland
• [PATCH 3/4] watchdog: st_wdt: Provide binding documentation for ST's LPC Watchdog driver   Mark Rutland
• [PATCH 4/4] watchdog: st_wdt: Add new driver for ST's LPC Watchdog   Mark Rutland
• [PATCH 1/3] ARM: mediatek: Add basic support for mt6592   Mark Rutland
• [PATCH 0/7] arm64 kexec kernel patches V3   Mark Rutland
• [PATCH v1] Arm64: ASLR: fix text randomization   Mark Rutland
• [PATCH v3 6/7] dt-bindings: add irq domain parent binding   Mark Rutland
• [PATCH v3] arm64/efi: efistub: jump to 'stext' directly, not through the header   Mark Rutland
• [PATCH] arm64/efi: set PE/COFF section alignment to 4 KB   Mark Rutland
• [PATCH v3] arm64/efi: efistub: jump to 'stext' directly, not through the header   Mark Rutland
• [PATCH v3] arm64/efi: efistub: jump to 'stext' directly, not through the header   Mark Rutland
• [PATCH v3] arm64/efi: efistub: jump to 'stext' directly, not through the header   Mark Rutland
• [RFC 1/4] arm64: amd-seattle: Adding device tree for AMD Seattle platform   Mark Rutland
• [PATCH v3] arm64/efi: efistub: jump to 'stext' directly, not through the header   Mark Rutland
• [PATCH] arm64/efi: set PE/COFF section alignment to 4 KB   Mark Rutland
• [PATCH] arm64/efi: set PE/COFF section alignment to 4 KB   Mark Rutland
• [PATCH] ARM: meson: Fix UART compatible   Mark Rutland
• [PATCH v4 03/10] ARM: dts: add DT for Alphascale ASM9260 SoC   Mark Rutland
• [PATCH v4 04/10] ARM: add alphascale,acc.txt bindings documentation   Mark Rutland
• [RFC 4/7] ARM: dts: add support for Vybrid running on Cortex-M4   Mark Rutland
• [PATCH v2 1/4] arm: pxa: add device-tree irq init for pxa27x   Mark Rutland
• [PATCH V4 1/6] Documentation: DT: Add bindings for FSL NS16550A UART   Mark Rutland
• [PATCH V4 4/6] arm64: Add DTS support for FSL's LS2085A SoC   Mark Rutland
• [RFC PATCH] arm64/efi: use stable virtual mappings for UEFI runtime services   Mark Rutland
• [PATCH v4] dma: Add Xilinx AXI Direct Memory Access Engine driver support   Mark Rutland
• [PATCH] arm64: dts: exynos7: add support for cpuidle core power down   Mark Rutland
• [PATCH v4] dma: Add Xilinx AXI Direct Memory Access Engine driver support   Mark Rutland
• [PATCH] ARM/ARM64: arch-timer: fix arch_timer_probed logic   Mark Rutland
• [PATCH 3/4] ARM: dts: add RK3288 suspend support   Mark Rutland
• [PATCH v2 2/5] Documentation: DT: Add bindings for Spreadtrum Sharkl Platform   Mark Rutland
• [PATCH v2 3/5] arm64: dts: Add support for Spreadtrum Sharkl3 SoC in dts and Makefile.   Mark Rutland
• [PATCH v2 5/5] tty/serial: Add earlycon support for Spreadtrum serial driver   Mark Rutland
• [PATCH v2 1/5] Documentation: DT: Renamed of-serial.txt to 8250.txt   Mark Rutland
• [PATCH] clocksource: arm_arch_timer: fix system hang   Mark Rutland
• [PATCH v2 5/5] tty/serial: Add earlycon support for Spreadtrum serial driver   Mark Rutland
• [PATCH 0/1] bus: cci: move away from arm_pmu framework   Mark Rutland
• [PATCH 1/1] bus: cci: move away from arm_pmu framework   Mark Rutland
• [PATCH] efi: efi-stub: notify on DTB absence   Mark Rutland
• [PATCHv2 1/2] ARM: dts: socfpga: Fix SD card detect   Mark Rutland
• [PATCH] efi: efi-stub: notify on DTB absence   Mark Rutland
• [PATCHv2 1/2] ARM: dts: socfpga: Fix SD card detect   Mark Rutland
• [PATCHv2 1/2] ARM: dts: socfpga: Fix SD card detect   Mark Rutland
• [PATCH v3 5/6] Documentation: dt-bindings: Add binding info for X-Gene QMTM UIO driver   Mark Rutland
• [PATCH] ARM/ARM64: arch-timer: fix arch_timer_probed logic   Mark Rutland
• where/how arm start first jump from svc to user in kernel   Mark Rutland
• [PATCH 0/8] Prepatory rework for multi-PMU support.   Mark Rutland
• [PATCH 1/8] arm: perf: factor out callchain code   Mark Rutland
• [PATCH 2/8] arm: perf: make PMU probing data-driven   Mark Rutland
• [PATCH 3/8] arm: perf: use IDR types for CPU PMUs   Mark Rutland
• [PATCH 4/8] arm: perf: limit size of accounting data   Mark Rutland
• [PATCH 5/8] arm: perf: kill get_hw_events()   Mark Rutland
• [PATCH 6/8] arm: perf: fold percpu_pmu into pmu_hw_events   Mark Rutland
• [PATCH 7/8] arm: perf: dynamically allocate cpu hardware data   Mark Rutland
• [PATCH 8/8] arm: perf: fold hotplug notifier into arm_pmu   Mark Rutland
• where/how arm start first jump from svc to user in kernel   Mark Rutland
• [PATCH 2/8] arm: perf: make PMU probing data-driven   Mark Rutland
• [PATCH 3/8] arm: perf: use IDR types for CPU PMUs   Mark Rutland
• [PATCH 6/8] arm: perf: fold percpu_pmu into pmu_hw_events   Mark Rutland
• [PATCH 1/2] ARM: perf: armv7 remove useless return and check of idx in counter handling   Mark Rutland
• [PATCH 2/2] ARM: perf: armv7: wrap unsupported arch init functions via micro   Mark Rutland
• [PATCH 7/8] arm: perf: dynamically allocate cpu hardware data   Mark Rutland
• [PATCH resend] ARM: perf: remove useless return and check of idx in counter handling   Mark Rutland
• [PATCH v2 36/47] arm64: psci: Register with kernel poweroff handler   Mark Rutland
• [PATCH] tty/serial: earlycon: Fix print for implied MMIO case   Mark Rutland
• [PATCH 3/7] irqchip: armada-370-xp: Introduce a is_percpu_irq() helper for readability   Mark Rutland
• [PATCH 5/7] ARM: mvebu: Enable Performance Monitor Unit on Armada 375 SoC   Mark Rutland
• [PATCH 6/7] ARM: mvebu: Enable Performance Monitor Unit on Armada 380/385 SoC   Mark Rutland
• [PATCH 7/7] ARM: mvebu: Enable perf support in mvebu_v7_defconfig   Mark Rutland
• [PATCH 01/10] arm64/efi: efistub: jump to 'stext' directly, not through the header   Mark Rutland
• [PATCH 02/10] arm64/efi: set PE/COFF section alignment to 4 KB   Mark Rutland
• [PATCH 7/7] ARM: mvebu: Enable perf support in mvebu_v7_defconfig   Mark Rutland
• [PATCH 04/10] arm64/efi: reserve regions of type ACPI_MEMORY_NVS   Mark Rutland
• [PATCH 5/7] ARM: mvebu: Enable Performance Monitor Unit on Armada 375 SoC   Mark Rutland
• [PATCH 5/7] ARM: mvebu: Enable Performance Monitor Unit on Armada 375 SoC   Mark Rutland
• [PATCHv2] efi: efi-stub: notify on DTB absence   Mark Rutland
• [PATCH 06/10] arm64/efi: use UEFI memory map unconditionally if available   Mark Rutland
• [PATCH] clocksource: arm_arch_timer: Don't wait for probe of unexisting timers   Mark Rutland
• [PATCH 06/10] arm64/efi: use UEFI memory map unconditionally if available   Mark Rutland
• [PATCH 01/10] arm64/kvm: Fix assembler compatibility of macros   Mark Rutland
• [PATCH 08/10] arm64/kexec: Add core kexec support   Mark Rutland
• [PATCH 09/10] arm64/kexec: Enable kexec in the arm64 defconfig   Mark Rutland
• [PATCH 05/10] arm64: Convert dts to use reserved-memory nodes   Mark Rutland
• [PATCH 06/10] arm64: Update booting.txt to reserved-memory nodes   Mark Rutland
• [PATCH 04/10] arm64: Add EL2 switch to soft_restart   Mark Rutland
• [PATCH 06/10] arm64: Update booting.txt to reserved-memory nodes   Mark Rutland
• [PATCH 05/10] arm64: Convert dts to use reserved-memory nodes   Mark Rutland
• [RFC PATCH 0/1] arm64: Fix /proc/cpuinfo   Mark Rutland
• [RFC PATCH 1/1] arm64: Fix up /proc/cpuinfo   Mark Rutland
• [PATCH 06/10] arm64: Update booting.txt to reserved-memory nodes   Mark Rutland
• [RFC PATCH 0/1] arm64: Fix /proc/cpuinfo   Mark Rutland
• [PATCHv2 0/9] Prepatory rework for multi-PMU support.   Mark Rutland
• [PATCHv2 1/9] arm: perf: factor out callchain code   Mark Rutland
• [PATCHv2 2/9] arm: perf: add missing pr_info newlines   Mark Rutland
• [PATCHv2 3/9] arm: perf: make PMU probing data-driven   Mark Rutland
• [PATCHv2 4/9] arm: perf: use IDR types for CPU PMUs   Mark Rutland
• [PATCHv2 5/9] arm: perf: limit size of accounting data   Mark Rutland
• [PATCHv2 6/9] arm: perf: kill get_hw_events()   Mark Rutland
• [PATCHv2 7/9] arm: perf: fold percpu_pmu into pmu_hw_events   Mark Rutland
• [PATCHv2 8/9] arm: perf: dynamically allocate cpu hardware data   Mark Rutland
• [PATCHv2 9/9] arm: perf: fold hotplug notifier into arm_pmu   Mark Rutland
• [PATCH] arm64: amd-seattle: Adding device tree for AMD Seattle platform   Mark Rutland
• where/how arm start first jump from svc to user in kernel   Mark Rutland
• [PATCHv4 1/7] arm64: Treat handle_arch_irq as a function pointer   Mark Rutland
• [PATCHv4 2/7] arm64: Switch to ldr for loading the stub vectors   Mark Rutland
• [PATCHv4 4/7] arm64: Move some head.text functions to executable section   Mark Rutland
• [PATCHv4 3/7] arm64: Move cpu_resume into the text section   Mark Rutland
• No subject   Mark Rutland
• [PATCHv4 5/7] arm64: Factor out fixmap initialiation from ioremap   Mark Rutland
• your mail   Mark Rutland
• [PATCHv4 7/7] arm64: add better page protections to arm64   Mark Rutland
• [PATCHv2 9/9] arm: perf: fold hotplug notifier into arm_pmu   Mark Rutland
• [PATCHv4 3/7] arm64: Move cpu_resume into the text section   Mark Rutland
• [PATCH v2 04/10] arm64/efi: invert UEFI memory region reservation logic   Mark Rutland
• [PATCH v2 04/10] arm64/efi: invert UEFI memory region reservation logic   Mark Rutland
• [PATCH] arm64: KVM: fix unmapping with 48-bit VAs   Mark Rutland
• where/how arm start first jump from svc to user in kernel   Mark Rutland
• [PATCH 1/1] bus: cci: move away from arm_pmu framework   Mark Rutland
• [PATCHv4 4/7] arm64: Move some head.text functions to executable section   Mark Rutland
• [PATCH v3 5/6] Documentation: dt-bindings: Add binding info for X-Gene QMTM UIO driver   Mark Rutland
• [RESEND][PATCH] arm64: add support to dump the kernel page tables   Mark Rutland
• [PATCH 01/44] kernel: Add support for poweroff handler call chain   Philippe Rétornaz
• [PATCH v8 0/2] Adds PMU and S2R support for exynos5420   Vikas Sajjan
• [PATCH v8 0/2] Adds PMU and S2R support for exynos5420   Vikas Sajjan
• [PATCH v9 0/2] Adds PMU and S2R support for exynos5420   Vikas Sajjan
• [PATCH v9 1/2] ARM: exynos5: Add PMU support for 5420   Vikas Sajjan
• [PATCH v9 2/2] ARM: exynos5: Add Suspend-to-RAM support for 5420   Vikas Sajjan
• [PATCH v9 1/2] ARM: exynos5: Add PMU support for 5420   Vikas Sajjan
• [PATCH v9 2/2] ARM: exynos5: Add Suspend-to-RAM support for 5420   Vikas Sajjan
• [PATCH v9 0/2] Adds PMU and S2R support for exynos5420   Vikas Sajjan
• [PATCH v9 0/2] Adds PMU and S2R support for exynos5420   Vikas Sajjan
• [PATCH v9 0/2] Adds PMU and S2R support for exynos5420   Vikas Sajjan
• [PATCH v9 0/2] Adds PMU and S2R support for exynos5420   Vikas Sajjan
• [RFC PATCH 07/16] c6x: support poweroff through poweroff handler call chain   Mark Salter
• [PATCH v3] arm64/efi: efistub: jump to 'stext' directly, not through the header   Mark Salter
• [PATCH v3] arm64/efi: efistub: jump to 'stext' directly, not through the header   Mark Salter
• [PATCH 42/44] efi: Register poweroff handler with kernel poweroff handler   Mark Salter
• [PATCH] clocksource: arm_arch_timer: fix system hang   Mark Salter
• [PATCH] clocksource: arm_arch_timer: fix system hang   Mark Salter
• [PATCH] efi: efi-stub: notify on DTB absence   Mark Salter
• [PATCH 06/10] arm64/efi: use UEFI memory map unconditionally if available   Mark Salter
• [PATCH 06/10] arm64/efi: use UEFI memory map unconditionally if available   Mark Salter
• [PATCHv2] efi: efi-stub: notify on DTB absence   Mark Salter
• [PATCH 06/10] arm64/efi: use UEFI memory map unconditionally if available   Mark Salter
• [PATCH RESEND 1/7] arm64: dts: Add APM X-Gene USB DTS node   Mark Salter
• RCU bug with v3.17-rc3 ?   Otavio Salvador
• [PATCH] i2c: rk3x: fix 0 length write transfers   Wolfram Sang
• [PATCH] i2c: rk3x: fix 0 length write transfers   Wolfram Sang
• [PATCH] i2c: qup: Fix order of runtime pm initialization   Wolfram Sang
• [PATCH 1/2] i2c: exynos: add support for HSI2C module on Exynos7   Wolfram Sang
• [PATCH 2/2] i2c: exynos5: Add Kconfig dependencies   Wolfram Sang
• [PATCH v8 1/2] i2c: imx: add DMA support for freescale i2c driver   Wolfram Sang
• [PATCH v2] i2c: axxia: Add I2C driver for AXM55xx   Wolfram Sang
• [PATCH v3] i2c: axxia: Add I2C driver for AXM55xx   Wolfram Sang
• [PATCH v3] i2c: axxia: Add I2C driver for AXM55xx   Wolfram Sang
• [PATCH v3 2/3] i2c: hix5hd2: add i2c controller driver   Wolfram Sang
• [PATCH v3 2/3] i2c: hix5hd2: add i2c controller driver   Wolfram Sang
• [PATCH] [RFC] ARM: shmobile: Add early debugging support using SCIF(A)   Wolfram Sang
• [PATCH] [RFC] ARM: shmobile: Add early debugging support using SCIF(A)   Wolfram Sang
• [PATCH v4 2/3] i2c: hix5hd2: add i2c controller driver   Wolfram Sang
• [PATCH v4 1/3] i2c: hix5hd2: add devicetree documentation   Wolfram Sang
• [PATCH v5 1/3] i2c: hix5hd2: add devicetree documentation   Wolfram Sang
• [PATCH v5 2/3] i2c: hix5hd2: add i2c controller driver   Wolfram Sang
• [PATCH v5 3/3] ARM: dts: hix5hd2: add i2c node   Wolfram Sang
• [PATCH v8 1/2] i2c: imx: add DMA support for freescale i2c driver   Wolfram Sang
• [RFC] drop owner assignment from platform_drivers   Wolfram Sang
• [Cocci] [RFC] drop owner assignment from platform_drivers   Wolfram Sang
• [RFC] drop owner assignment from platform_drivers   Wolfram Sang
• [RFC] drop owner assignment from platform_drivers   Wolfram Sang
• [RFC] drop owner assignment from platform_drivers   Wolfram Sang
• [RFC] drop owner assignment from platform_drivers   Wolfram Sang
• [RFC] drop owner assignment from platform_drivers   Wolfram Sang
• [PATCH v2] ARM: shmobile: Add early debugging support using SCIF(A)   Wolfram Sang
• [PATCH v2] i2c:at91: add bound checking on SMBus block length bytes   Wolfram Sang
• [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller   Wolfram Sang
• [PATCH/RFC] ARM: shmobile: lager: Add I2C2 clock frequency to device tree   Wolfram Sang
• Differences between tlv320aic3x and tlv320aic31xx   Jyri Sarha
• [PATCH 03/26] ARM: sun4i: a1000: Relicense the device tree under GPLv2/X11   Olliver Schinagl
• [PATCH v5 3/4] ARM: tegra: Add thermal trip points for Jetson TK1   Peter De Schrijver
• [PATCH v2 4/4] clk: Use ww_mutexes for clk_prepare_{lock/unlock}   Peter De Schrijver
• [PATCH v2 4/4] clk: Use ww_mutexes for clk_prepare_{lock/unlock}   Peter De Schrijver
• [PATCH v1 1/5] mfd: tps65910: Convert ti, system-power-controller DT property to poweroff-source   Peter De Schrijver
• [PATCH v1 1/5] mfd: tps65910: Convert ti, system-power-controller DT property to poweroff-source   Peter De Schrijver
• [PATCH v5 0/7] Per-user clock constraints   Peter De Schrijver
• [PATCH] i2c: rk3x: fix 0 length write transfers   Max Schwarz
• [PATCH v4] i2c: rk3x: adjust the LOW divison based on characteristics of SCL   Max Schwarz
• [PATCH v5] i2c: rk3x: adjust the LOW divison based on characteristics of SCL   Max Schwarz
• [PATCH v6] i2c: rk3x: adjust the LOW divison based on characteristics of SCL   Max Schwarz
• [PATCH v2] ARM: dts: rockchip: use internal pull-up resistors on I2C busses   Max Schwarz
• [REPOST PATCH 0/2] ARM: OMAP3+: VCVP mapping fixes to get DVFS working   Enric Balletbo Serra
• [REPOST PATCH 0/2] ARM: OMAP3+: VCVP mapping fixes to get DVFS working   Enric Balletbo Serra
• [REPOST PATCH 0/2] ARM: OMAP3+: VCVP mapping fixes to get DVFS working   Enric Balletbo Serra
• [PATCH V4 0/6] ARM64: Add support for FSL's LS2085A SoC   Bhupesh Sharma
• [PATCH V4 1/6] Documentation: DT: Add bindings for FSL NS16550A UART   Bhupesh Sharma
• [PATCH V4 2/6] Documentation: DT: Add entry for FSL LS2085A SoC and Simulator model   Bhupesh Sharma
• [PATCH V4 3/6] Documentation: DT: Add entry for FSL Management Complex   Bhupesh Sharma
• [PATCH V4 4/6] arm64: Add DTS support for FSL's LS2085A SoC   Bhupesh Sharma
• [PATCH V4 5/6] arm64: dts/Makefile: Add support for FSL's LS2085A simulator model   Bhupesh Sharma
• [PATCH V4 6/6] arm64: Add support for FSL's LS2085A SoC in Kconfig and defconfig   Bhupesh Sharma
• [PATCH 2/2 v3] SPI: spi-pxa2xx: SPI support for Intel Quark X1000   Andy Shevchenko
• [PATCH v2 14/53] dmaengine: dw: Split device_control   Andy Shevchenko
• [PATCH 1/2 v3] SPI: spi-pxa2xx: Add helpers for regiseters' accessing   Andy Shevchenko
• [PATCH v3 0/3] mtd: nand: gpmi: add proper raw access support   Huang Shijie
• [PATCH v3 0/3] mtd: nand: gpmi: add proper raw access support   Huang Shijie
• [PATCH v3 0/3] mtd: nand: gpmi: add proper raw access support   Huang Shijie
• [PATCH v3 0/3] mtd: nand: gpmi: add proper raw access support   Huang Shijie
• [PATCH v3 0/3] mtd: nand: gpmi: add proper raw access support   Huang Shijie
• [PATCH v4 1/4] mtd: nand: provide detailed description for raw read/write page methods   Huang Shijie
• soc: ti: add Keystone Navigator DMA support   Santosh Shilimkar
• [PATCH 0/4] ARM: dts: keystone: fixes   Santosh Shilimkar
• [GIT PULL] ARM: dts: Keystone DTS fixes updates for 3.18   Santosh Shilimkar
• [GIT PULL] ARM: dts: Keystone DTS fixes updates for 3.18   Santosh Shilimkar
• [PATCH v1 2/4] ARM: keystone: pm: switch to use generic pm domains   Santosh Shilimkar
• [PATCH v1 4/4] ARM: dts: k2hk-evm: attach net, qmss and knav_dmas to keystone-gpc   Santosh Shilimkar
• [PATCH] ARM: keystone: add bus notifier to set dma_pfn_offset for pci devices   Santosh Shilimkar
• [PATCH] ARM: keystone: add bus notifier to set dma_pfn_offset for pci devices   Santosh Shilimkar
• [PATCH] ARM: keystone: add bus notifier to set dma_pfn_offset for pci devices   Santosh Shilimkar
• [PATCH] MAINTAINERS: Update Santosh Shilimkar's email id   Santosh Shilimkar
• ARM: issue with memory reservation from DT   Santosh Shilimkar
• [PATCH v2 1/3] PM / clock_ops: Add pm_clk_add_clk()   Santosh Shilimkar
• [PATCH v2 2/3] ARM: keystone: pm: switch to use generic pm domains   Santosh Shilimkar
• [PATCH 1/2] ARM: keystone_defconfig: enable dsp irq and gpio support   Santosh Shilimkar
• [PATCH 1/2] ARM: keystone_defconfig: enable dsp irq and gpio support   Santosh Shilimkar
• [PATCH v2 2/3] ARM: keystone: pm: switch to use generic pm domains   Santosh Shilimkar
• [PATCH v3 0/5] ARM: keystone: pm: switch to use generic pm domains   Santosh Shilimkar
• [PATCH 1/3] soc: ti: Use list_first_entry_or_null() at appropriate places   Santosh Shilimkar
• [PATCH 0/4] Enable PCI controller for Keystone SoCs   Santosh Shilimkar
• [PATCH 0/4] Enable PCI controller for Keystone SoCs   Santosh Shilimkar
• [PATCH v1 1/4] ARM: keystone: add pcie related options   Santosh Shilimkar
• [PATCH v1 2/4] ARM: keystone: defconfig: add options to enable PCI controller   Santosh Shilimkar
• [PATCH v1 3/4] ARM: dts: keystone: add DT bindings for PCI controller for port 0   Santosh Shilimkar
• [PATCH v1 4/4] ARM: dts: keystone-k2e: add DT bindings for PCI controller for port 1   Santosh Shilimkar
• [PATCH v1 0/4] Enable PCI controller for Keystone SoCs   Santosh Shilimkar
• [PATCH v3 2/2] ARM: shmobile: lager: enable HS-USB   Yoshihiro Shimoda
• [PATCH v3 2/3] ARM: shmobile: koelsch: enable HS-USB   Yoshihiro Shimoda
• [PATCH v3 2/3] ARM: shmobile: koelsch: enable HS-USB   Yoshihiro Shimoda
• [PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board   Yoshihiro Shimoda
• [PATCH v3 1/3] Add HS-USB device tree support for R8A7791/Koelsch/Henninger board   Yoshihiro Shimoda
• [PATCH 2/4] [media] exynos4-is: Remove optional dependency on PLAT_S5P   Sergei Shtylyov
• [PATCH v3 0/2] Add HS-USB device tree support for R8A7790/Lager board   Sergei Shtylyov
• [PATCH v3 1/2] ARM: shmobile: r8a7790: add HS-USB device node   Sergei Shtylyov
• [PATCH v3 2/2] ARM: shmobile: lager: enable HS-USB   Sergei Shtylyov
• [PATCH v3 2/2] ARM: shmobile: lager: enable HS-USB   Sergei Shtylyov
• [PATCH v3 2/2] ARM: shmobile: lager: enable HS-USB   Sergei Shtylyov
• [PATCH v4 0/4] Correct vendor-prefix and document device isl29028   Sergei Shtylyov
• [PATCH v3 1/3] Add HS-USB device tree support for R8A7791/Koelsch/Henninger board   Sergei Shtylyov
• [PATCH v3 1/3] ARM: shmobile: r8a7791: add HS-USB device node   Sergei Shtylyov
• [PATCH v3 2/3] ARM: shmobile: koelsch: enable HS-USB   Sergei Shtylyov
• [PATCH v3 3/3] ARM: shmobile: henninger: enable HS-USB   Sergei Shtylyov
• [PATCH v3 1/3] Add HS-USB device tree support for R8A7791/Koelsch/Henninger board   Sergei Shtylyov
• [PATCH v3 2/3] ARM: shmobile: koelsch: enable HS-USB   Sergei Shtylyov
• [PATCH v3 2/3] ARM: shmobile: koelsch: enable HS-USB   Sergei Shtylyov
• [PATCH v4 0/2] Add HS-USB device tree support for R8A7790/Lager board   Sergei Shtylyov
• [PATCH v4 1/2] ARM: shmobile: r8a7790: add HS-USB device node   Sergei Shtylyov
• [PATCH v4 2/2] ARM: shmobile: lager: enable HS-USB   Sergei Shtylyov
• [PATCH v3 2/3] ARM: shmobile: koelsch: enable HS-USB   Sergei Shtylyov
• [PATCH 8/9] ARM: berlin: Add phy-connection-type to BG2Q PHY   Sergei Shtylyov
• [PATCH 8/9] ARM: berlin: Add phy-connection-type to BG2Q PHY   Sergei Shtylyov
• [PATCH] ARM: davinci: Remove redundant casts   Sergei Shtylyov
• [PATCH v3 2/3] i2c/at91: add support for system PM   Sergei Shtylyov
• [PATCH 1/2] ARM: add mach-asm9260   Sergei Shtylyov
• [PATCH] pinctrl: at91: fix compilation   Sergei Shtylyov
• [PATCH/RFC] ARM: shmobile: lager: Fix node name of GPIO keys   Sergei Shtylyov
• [PATCH v7 1/2] usb: host: xhci-plat: Get PHYs for xhci's hcds   Sergei Shtylyov
• [PATCH 09/16] tty: serial: 8250_dma: Add a TX trigger workaround for AM33xx   Sebastian Andrzej Siewior
• [PATCH 00/13 v10] omap 8250 based UART + DMA   Sebastian Andrzej Siewior
• [PATCH] tty: serial: omap: increase max consoles to 10   Sebastian Andrzej Siewior
• [PATCH V2] tty: serial: omap: Increase max consoles and add check to prevent crash   Sebastian Andrzej Siewior
• [PATCH 0/4] Touchscreen performance related fixes   Sebastian Andrzej Siewior
• [PATCH] net: xilinx: Remove unnecessary ether_setup after alloc_etherdev   Michal Simek
• [PATCH] PCI: xilinx: Trivial fix in DT example   Michal Simek
• [PATCH] ARM: zynq: DT: Add cadence watchdog node   Michal Simek
• [PATCH 1/3] ARM: zynq: Move common.h to generic location   Michal Simek
• [PATCH 2/3] ARM: zynq: Enable generic allocator   Michal Simek
• [PATCH 3/3] ARM: zynq: Extend SLCR driver to read OCM configuration   Michal Simek
• [PATCH v3 1/2] ARM: zynq: Add OCM controller driver   Michal Simek
• [PATCH v3 2/2] ARM: zynq: DT: Add OCM controller node   Michal Simek
• [PATCH 3/3] ARM: zynq: Extend SLCR driver to read OCM configuration   Michal Simek
• [RFC] pinctrl driver for Zynq   Michal Simek
• [PATCH 1/3] ARM: zynq: Move common.h to generic location   Michal Simek
• [PATCH v2 1/3] ARM: zynq: Move common.h to generic location   Michal Simek
• [PATCH v2 2/3] ARM: zynq: Enable generic allocator   Michal Simek
• [PATCH v2 3/3] ARM: zynq: Extend SLCR driver to read OCM configuration   Michal Simek
• [PATCH v2 2/3] ARM: zynq: Enable generic allocator   Michal Simek
• [GIT PULL] Xilinx Zynq dt fixes for v3.18   Michal Simek
• [PATCH] ARM: zynq: Actually remove hotplug.c   Michal Simek
• [PATCH v2 1/3] ARM: zynq: Move common.h to generic location   Michal Simek
• [PATCH RFC v2 8/8] ARM: zynq: DT: Add pinctrl information   Michal Simek
• [PATCH] MAINTAINERS: Update Zynq maintainer record   Michal Simek
• [PATCH] MAINTAINERS: Update Zynq maintainer record   Michal Simek
• [PATCH v2 00/11] ARM: dts: zynq: Prepare Parallella   Michal Simek
• [PATCH v2] MAINTAINERS: Add myself as reviewer for Zynq   Michal Simek
• [PATCH v2] MAINTAINERS: Add myself as reviewer for Zynq   Michal Simek
• [GIT PULL 2/2] Samsung defconfig updates for v3.18   Sjoerd Simons
• [PATCH 0/3] arm/arm64: Add dirty page logging for ARMv8   Mario Smarduch
• [PATCH 1/3] arm64: ARMv8 headers changes for dirty page logging   Mario Smarduch
• [PATCH 2/3] arm64: Add HYP interface to flush VM Stage 1/2 TLB entires   Mario Smarduch
• [PATCH 3/3] arm/arm64: Enable Dirty Page logging for ARMv8 move log read, tlb flush to generic code   Mario Smarduch
• [PATCH v12 0/6] arm/KVM: dirty page logging support for ARMv7 (3.17.0-rc1)   Mario Smarduch
• [PATCH v12 1/6] KVM: Add architecture-defined TLB flush support   Mario Smarduch
• [PATCH v12 2/6] KVM: Add generic support for dirty page logging   Mario Smarduch
• [PATCH v12 3/6] arm: KVM: Add ARMv7 API to flush TLBs   Mario Smarduch
• [PATCH v12 4/6] arm: KVM: Add initial dirty page locking infrastructure   Mario Smarduch
• [PATCH v12 5/6] arm: KVM: dirty log read write protect support   Mario Smarduch
• [PATCH v12 6/6] arm: KVM: ARMv7 dirty page logging 2nd stage page fault   Mario Smarduch
• [PATCH v12 0/6] arm/KVM: dirty page logging support for ARMv7 (3.17.0-rc1)   Mario Smarduch
• [PATCH v12 0/6] arm/KVM: dirty page logging support for ARMv7 (3.17.0-rc1)   Mario Smarduch
• [PATCH v12 0/6] 2nd-request for review comments: arm/KVM: dirty page logging support for ARMv7 (3.17.0-rc1)   Mario Smarduch
• [PATCH v12 2/6] KVM: Add generic support for dirty page logging   Mario Smarduch
• [PATCH v12 0/6] arm/KVM: dirty page logging support for ARMv7 (3.17.0-rc1)   Mario Smarduch
• [PATCH] arm64: Add KEYS_COMPAT to Kconfig & enable   Michael Spang
• [PATCH] serial/core: Initialize the console pm state   Sudhir Sreedharan
• [PATCH] serial/core: Initialize the console pm state   Sudhir Sreedharan
• [PATCH] serial/core: Initialize the console pm state   Sudhir Sreedharan
• [PATCH] tty: serial: 8250_core: Do not call set_sleep for console port   Sudhir Sreedharan
• [PATCH] tty: serial: 8250_core: restore the LCR register in set_sleep   Sudhir Sreedharan
• [PATCH] tty: serial: 8250_core: restore the LCR register in set_sleep   Sudhir Sreedharan
• [PATCH] tty: serial: 8250_core: restore the LCR register in set_sleep   Sudhir Sreedharan
• [PATCH v1] tty: serial: 8250_core: restore the LCR register in set_sleep   Sudhir Sreedharan
• [PATCH v1] tty: serial: 8250_core: restore the LCR register in set_sleep   Sudhir Sreedharan
• [PATCH 0/2] introduce XENMEM_cache_flush   Stefano Stabellini
• [PATCH 1/2] xen/arm: remove handling of XENFEAT_grant_map_identity   Stefano Stabellini
• [PATCH 2/2] xen/arm: introduce XENMEM_cache_flush   Stefano Stabellini
• [Xen-devel] [PATCH 1/2] xen/arm: remove handling of XENFEAT_grant_map_identity   Stefano Stabellini
• [PATCH 2/2] xen/arm: introduce XENMEM_cache_flush   Stefano Stabellini
• [PATCH v2 0/2] introduce XENMEM_cache_flush   Stefano Stabellini
• [PATCH v2 1/2] xen/arm: remove handling of XENFEAT_grant_map_identity   Stefano Stabellini
• [PATCH v2 2/2] xen/arm: introduce GNTTABOP_cache_flush   Stefano Stabellini
• [PATCH v2 2/2] xen/arm: introduce GNTTABOP_cache_flush   Stefano Stabellini
• [PATCH v3 0/2] introduce GNTTABOP_cache_flush   Stefano Stabellini
• [PATCH v3 1/2] xen/arm: remove handling of XENFEAT_grant_map_identity   Stefano Stabellini
• [PATCH v3 2/2] xen/arm: introduce GNTTABOP_cache_flush   Stefano Stabellini
• [PATCH v4 0/7] introduce GNTTABOP_cache_flush   Stefano Stabellini
• [PATCH v4 1/7] xen/arm: remove handling of XENFEAT_grant_map_identity   Stefano Stabellini
• [PATCH v4 2/7] xen/arm: remove outer_*_range call   Stefano Stabellini
• [PATCH v4 3/7] [RFC] arm/arm64: introduce is_dma_coherent   Stefano Stabellini
• [PATCH v4 4/7] xen/arm: use is_dma_coherent   Stefano Stabellini
• [PATCH v4 5/7] xen/arm/arm64: merge xen/mm32.c into xen/mm.c   Stefano Stabellini
• [PATCH v4 6/7] xen/arm/arm64: introduce xen_arch_need_swiotlb   Stefano Stabellini
• [PATCH v4 7/7] xen/arm: introduce GNTTABOP_cache_flush   Stefano Stabellini
• [PATCH v4 3/7] [RFC] arm/arm64: introduce is_dma_coherent   Stefano Stabellini
• [PATCH v4 3/7] [RFC] arm/arm64: introduce is_dma_coherent   Stefano Stabellini
• [PATCH v4 3/7] [RFC] arm/arm64: introduce is_dma_coherent   Stefano Stabellini
• [PATCH v4 3/7] [RFC] arm/arm64: introduce is_dma_coherent   Stefano Stabellini
• [PATCH v4 3/7] [RFC] arm/arm64: introduce is_dma_coherent   Stefano Stabellini
• [PATCH v5 0/6] introduce GNTTABOP_cache_flush   Stefano Stabellini
• [PATCH v5 1/6] xen/arm: remove handling of XENFEAT_grant_map_identity   Stefano Stabellini
• [PATCH v5 2/6] xen/arm: remove outer_*_range call   Stefano Stabellini
• [PATCH v5 3/6] xen/arm: introduce xen_is_dma_coherent   Stefano Stabellini
• [PATCH v5 4/6] xen/arm/arm64: merge xen/mm32.c into xen/mm.c   Stefano Stabellini
• [PATCH v5 5/6] xen/arm/arm64: introduce xen_arch_need_swiotlb   Stefano Stabellini
• [PATCH v5 6/6] xen/arm: introduce GNTTABOP_cache_flush   Stefano Stabellini
• [PATCH v4 3/7] [RFC] arm/arm64: introduce is_dma_coherent   Stefano Stabellini
• [PATCH v4 3/7] [RFC] arm/arm64: introduce is_dma_coherent   Stefano Stabellini
• [PATCH v4 3/7] [RFC] arm/arm64: introduce is_dma_coherent   Stefano Stabellini
• [PATCH v4 3/7] [RFC] arm/arm64: introduce is_dma_coherent   Stefano Stabellini
• [PATCH v6 0/6] introduce GNTTABOP_cache_flush   Stefano Stabellini
• [PATCH v6 1/7] xen/arm: remove handling of XENFEAT_grant_map_identity   Stefano Stabellini
• [PATCH v6 2/7] xen/arm: remove outer_*_range call   Stefano Stabellini
• [PATCH v6 3/7] xen/arm: introduce is_dma_coherent   Stefano Stabellini
• [PATCH v6 4/7] xen/arm: use is_dma_coherent   Stefano Stabellini
• [PATCH v6 5/7] xen/arm/arm64: merge xen/mm32.c into xen/mm.c   Stefano Stabellini
• [PATCH v6 6/7] xen/arm/arm64: introduce xen_arch_need_swiotlb   Stefano Stabellini
• [PATCH v6 7/7] xen/arm: introduce GNTTABOP_cache_flush   Stefano Stabellini
• [PATCH v4 3/7] [RFC] arm/arm64: introduce is_dma_coherent   Stefano Stabellini
• [PATCH v7 0/8] introduce GNTTABOP_cache_flush   Stefano Stabellini
• [PATCH v7 1/8] xen/arm: remove handling of XENFEAT_grant_map_identity   Stefano Stabellini
• [PATCH v7 2/8] xen/arm: remove outer_*_range call   Stefano Stabellini
• [PATCH v7 3/8] arm64: introduce is_device_dma_coherent   Stefano Stabellini
• [PATCH v7 4/8] arm: introduce is_device_dma_coherent   Stefano Stabellini
• [PATCH v7 5/8] xen/arm: use is_device_dma_coherent   Stefano Stabellini
• [PATCH v7 6/8] xen/arm/arm64: merge xen/mm32.c into xen/mm.c   Stefano Stabellini
• [PATCH v7 7/8] xen/arm/arm64: introduce xen_arch_need_swiotlb   Stefano Stabellini
• [PATCH v7 8/8] xen/arm: introduce GNTTABOP_cache_flush   Stefano Stabellini
• [Xen-devel] [PATCH v4 3/7] [RFC] arm/arm64: introduce is_dma_coherent   Stefano Stabellini
• [PATCH 2/2] ARM: i.MX53: dts: add sahara module   Lucas Stach
• [PATCH v2 4/4] ARM: dts: mt8135: Add pinctrl node for mt8135.   Lucas Stach
• [PATCH v2 3/4] dt-bindings: Add pinctrl bindings for mt65xx/mt81xx.   Lucas Stach
• Setting cpu affinity for MSI-X on i.mx6 possible?   Lucas Stach
• [PATCH v2 06/10] mfd: tps65910: Use the standard DT property system-power-controller   Lucas Stach
• Setting cpu affinity for MSI-X on i.mx6 possible?   Lucas Stach
• [PATCH] i2c: rk3x: fix 0 length write transfers   Alexandru M Stan
• [PATCH] arm64: Fix compile error seen in non-SMP builds   Alexei Starovoitov
• [PATCH 1/1] ARM: at91/dt: sam9x5: Add CAN device nodes   Alexander Stein
• [PATCH v2 1/1] ARM: at91/dt: sam9x5: Add CAN device nodes   Alexander Stein
• [PATCH 1/1] ARM: at91/dt: sam9263: Add CAN device nodes   Alexander Stein
• [PATCH v3 1/1] ARM: at91/dt: sam9x5: Add CAN device nodes   Alexander Stein
• [PATCH v3 1/1] ARM: at91/dt: sam9x5: Add CAN device nodes   Alexander Stein
• [PATCH v4 1/1] ARM: at91/dt: sam9x5: Add CAN device nodes   Alexander Stein
• [PATCH 1/2] ARM: Add printf annotation to early_print   Alexander Stein
• [PATCH 2/2] ARM64: Add printf annotation to early_print   Alexander Stein
• [PATCH v4 1/1] ARM: at91/dt: sam9x5: Add CAN device nodes   Alexander Stein
• [PATCH] usb: ehci/ohci: use SIMPLE_DEV_PM_OPS to support hibernation   Alan Stern
• [PATCH 0/4] ARM: dts: keystone: fixes   Grygorii Strashko
• [PATCH 1/4] ARM: dts: keystone: fix io range for usb_phy0   Grygorii Strashko
• [PATCH 2/4] ARM: dts: keystone-k2e: update usb1 node for dma properties   Grygorii Strashko
• [PATCH 3/4] ARM: dts: keystone-k2e: fix mdio io start address   Grygorii Strashko
• [PATCH 4/4] ARM: dts: keystone-k2l: fix mdio io start address   Grygorii Strashko
• [PATCH v2 0/3] ARM: rk3288 : Add PM Domain support   Grygorii Strashko
• [PATCH v1 2/4] ARM: keystone: pm: switch to use generic pm domains   Grygorii Strashko
• ARM: issue with memory reservation from DT   Grygorii Strashko
• ARM: issue with memory reservation from DT   Grygorii Strashko
• ARM: issue with memory reservation from DT   Grygorii Strashko
• [PATCH v2 0/3] ARM: keystone: pm: switch to use generic pm domains   Grygorii Strashko
• [PATCH v2 1/3] PM / clock_ops: Add pm_clk_add_clk()   Grygorii Strashko
• [PATCH v2 2/3] ARM: keystone: pm: switch to use generic pm domains   Grygorii Strashko
• [PATCH v2 3/3] ARM: dts: keystone: add generic pd controller node   Grygorii Strashko
• [PATCH 1/2] ARM: keystone_defconfig: enable dsp irq and gpio support   Grygorii Strashko
• [PATCH 2/2] ARM: keystone_defconfig: enable mdio and marvell eth phys   Grygorii Strashko
• [PATCH 1/2] ARM: dts: k2e-mvm: add 1g ethernet phys nodes   Grygorii Strashko
• [PATCH 2/2] ARM: dts: k2l-mvm: add 1g ethernet phys nodes   Grygorii Strashko
• ARM: issue with memory reservation from DT   Grygorii Strashko
• ARM: issue with memory reservation from DT   Grygorii Strashko
• [PATCH v2 2/3] ARM: keystone: pm: switch to use generic pm domains   Grygorii Strashko
• [PATCH 1/2] ARM: keystone_defconfig: enable dsp irq and gpio support   Grygorii Strashko
• [PATCH v2 1/3] PM / clock_ops: Add pm_clk_add_clk()   Grygorii Strashko
• [PATCH v3 0/5] ARM: keystone: pm: switch to use generic pm domains   Grygorii Strashko
• [PATCH v3 1/5] PM / clock_ops: Add pm_clk_add_clk()   Grygorii Strashko
• [PATCH v3 2/5] PM / clock_ops: make __pm_clk_enable more generic   Grygorii Strashko
• [PATCH v3 3/5] PM / clock_ops: add and enable clocks always if !CONFIG_PM_RUNTIME   Grygorii Strashko
• [PATCH v3 4/5] ARM: keystone: pm: switch to use generic pm domains   Grygorii Strashko
• [PATCH v3 5/5] ARM: dts: keystone: add generic pm controller node   Grygorii Strashko
• [PATCH v2 2/3] ARM: keystone: pm: switch to use generic pm domains   Grygorii Strashko
• [PATCH v3 1/5] PM / clock_ops: Add pm_clk_add_clk()   Grygorii Strashko
• [RFC 1/2] PM / Domains: Power on domain early during system resume   Grygorii Strashko
• [PATCH v3 1/5] PM / clock_ops: Add pm_clk_add_clk()   Grygorii Strashko
• [PATCH v2 2/3] ARM: keystone: pm: switch to use generic pm domains   Grygorii Strashko
• [GIT PULL] some more Rockchip clock changes for 3.18   Heiko Stübner
• [PATCH v7 00/11] kernel: Add support for restart handler call chain   Heiko Stübner
• [PATCH 2/2] ARM: dts: enable init rate for clock   Heiko Stübner
• [PATCH 2/2] ARM: dts: enable init rate for clock   Heiko Stübner
• [PATCH v4] i2c: rk3x: adjust the LOW divison based on characteristics of SCL   Heiko Stübner
• [PATCH v3 1/6] ARM: rockchip: convert to regmap and use pmu syscon if available   Heiko Stübner
• [PATCH v3 2/6] ARM: dts: rockchip: use the same pmu node name as before   Heiko Stübner
• [PATCH v3 3/6] ARM: rockchip: add option to access the pmu via a phandle in smp_operations   Heiko Stübner
• [PATCH v3 4/6] ARM: dts: rockchip: add pmu references to cpus nodes   Heiko Stübner
• [PATCH v3 5/6] ARM: rockchip: add basic smp support for rk3288   Heiko Stübner
• [PATCH v3 6/6] ARM: dts: rockchip: add intmem node for rk3288 smp support   Heiko Stübner
• [PATCH v3 0/6] add basic rk3288 smp support   Heiko Stübner
• [PATCH 1/2] ARM: rockchip: fix up rk3288 smp cpu hotplug   Heiko Stübner
• [PATCH] ARM: dts: rockchip: enable DMA on SPI for rk3066 and rk3188   Heiko Stübner
• [PATCH] clk: rockchip: fix parent for spdif_8ch_frac on rk3288   Heiko Stübner
• [PATCH] clk: rockchip: Add CLK_SET_RATE_PARENT to aclk_cpu_pre   Heiko Stübner
• [PATCH] clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate   Heiko Stübner
• [PATCH v3 3/3] ARM: dts: rk3288: add VOP iommu nodes   Heiko Stübner
• [PATCH] ARM: dts: rockchip: add I2S controllers for rk3066 and rk3188   Heiko Stübner
• [PATCH v4 4/6] ARM: rockchip: add basic smp support for rk3288   Heiko Stübner
• [PATCH v2] ARM: dts: rockchip: add I2S controllers for rk3066 and rk3188   Heiko Stübner
• [PATCH v2] clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate   Heiko Stübner
• [PATCH v2 0/2] init some clock rate from dts for rk3288   Heiko Stübner
• [PATCH v5 1/6] ARM: rockchip: convert to regmap and use pmu syscon if available   Heiko Stübner
• [PATCH] ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP   Heiko Stübner
• [PATCH] clk: rockchip: rk3288: removing the CLK_SET_RATE_PARENT from i2s_clkout   Heiko Stübner
• [PATCH] clk: rockchip: add npll to source of sclk_gpu   Heiko Stübner
• [PATCH v3 1/6] pinctrl: rockchip: add suspend/resume functions   Heiko Stübner
• [PATCH v5 2/6] ARM: rockchip: add option to access the pmu via a phandle in smp_operations   Heiko Stübner
• [PATCH 0/3] Rockchip IOMMU driver and devicetree bindings   Heiko Stübner
• [PATCH v2 3/4] pinctrl: rockchip: Parse pin groups before calling pinctrl_register()   Heiko Stübner
• [PATCH v2 4/4] pinctrl: rockchip: Protect read-modify-write with the spinlock   Heiko Stübner
• [PATCH v2 2/4] pinctrl: rockchip: Don't call pinctrl_gpio_direction_output() in pin_config_set()   Heiko Stübner
• [PATCH v2 1/4] pinctrl: rockchip: Set wake_enabled   Heiko Stübner
• [PATCH v2 1/4] pinctrl: rockchip: Set wake_enabled   Heiko Stübner
• [PATCH] ARM: dts: Add SPI DMA into rk3288.dtsi   Heiko Stübner
• [PATCH v5 1/3] iommu/rockchip: rk3288 iommu driver   Heiko Stübner
• [PATCH] ARM: dts: rockchip: use internal pull-up resistors on I2C busses   Heiko Stübner
• [PATCH v2 06/10] mfd: tps65910: Use the standard DT property system-power-controller   Heiko Stübner
• [PATCH v1 03/10] regulator: act8865: Use of_is_system_power_controller helper function   Heiko Stübner
• [PATCH v1 01/10] of: Rename "poweroff-source" property to "system-power-controller"   Heiko Stübner
• [PATCH v6 3/3] ARM: dts: rk3288: add VOP iommu nodes   Heiko Stübner
• [PATCH v6 1/3] iommu/rockchip: rk3288 iommu driver   Heiko Stübner
• [PATCH v2] ARM: dts: rockchip: use internal pull-up resistors on I2C busses   Heiko Stübner
• [GIT PULL 1/2] first bunch on Rockchip dt changes   Heiko Stübner
• [GIT PULL 2/2] cpufreq-dt platform device   Heiko Stübner
• [PATCH] clk: rockchip: disable unused clocks   Heiko Stübner
• [PATCH] clk: rockchip: change PLL setting for better clock jitter   Heiko Stübner
• [PATCH v2 1/4] pinctrl: rockchip: Set wake_enabled   Heiko Stübner
• [PATCH v6 0/7] This is the 1st version of suspend for RK3288.   Heiko Stübner
• [PATCH] clk: rockchip: disable unused clocks   Heiko Stübner
• [PATCH] clk: rockchip: fix rk3188 hsadc_frac definition   Heiko Stübner
• [PATCH v2] clk: rockchip: disable unused clocks   Heiko Stübner
• [PATCH v2 1/4] ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066   Heiko Stübner
• [PATCH v1 4/4] ARM: dts: rockchip: Enable emac node in rk3066a-marsboard   Heiko Stübner
• [PATCH v16 2/5] dt-bindings: document Rockchip thermal   Heiko Stübner
• [PATCH v2] mmc: dw_mmc: add support for the other bit of sdio interrupt   Heiko Stübner
• [PATCH v2 0/6] Add 10GbE support to APM X-Gene SoC ethernet driver   Iyappan Subramanian
• [PATCH v2 1/6] MAINTAINERS: Update APM X-Gene section   Iyappan Subramanian
• [PATCH v2 2/6] Documentation: dts: Update section header for APM X-Gene   Iyappan Subramanian
• [PATCH v2 3/6] dtb: Add 10GbE node to APM X-Gene SoC device tree   Iyappan Subramanian
• [PATCH v2 4/6] drivers: net: xgene: Preparing for adding 10GbE support   Iyappan Subramanian
• [PATCH v2 5/6] drivers: net: xgene: Add 10GbE support   Iyappan Subramanian
• [PATCH v2 6/6] drivers: net: xgene: Add 10GbE ethtool support   Iyappan Subramanian
• [PATCH v3 0/6] Add 10GbE support to APM X-Gene SoC ethernet driver   Iyappan Subramanian
• [PATCH v3 1/6] MAINTAINERS: Update APM X-Gene section   Iyappan Subramanian
• [PATCH v3 2/6] Documentation: dts: Update section header for APM X-Gene   Iyappan Subramanian
• [PATCH v3 3/6] dtb: Add 10GbE node to APM X-Gene SoC device tree   Iyappan Subramanian
• [PATCH v3 4/6] drivers: net: xgene: Preparing for adding 10GbE support   Iyappan Subramanian
• [PATCH v3 5/6] drivers: net: xgene: Add 10GbE support   Iyappan Subramanian
• [PATCH v3 6/6] drivers: net: xgene: Add 10GbE ethtool support   Iyappan Subramanian
• [PATCH v4 0/6] Add 10GbE support to APM X-Gene SoC ethernet driver   Iyappan Subramanian
• [PATCH v4 1/6] MAINTAINERS: Update APM X-Gene section   Iyappan Subramanian
• [PATCH v4 2/6] Documentation: dts: Update section header for APM X-Gene   Iyappan Subramanian
• [PATCH v4 3/6] dtb: Add 10GbE node to APM X-Gene SoC device tree   Iyappan Subramanian
• [PATCH v4 4/6] drivers: net: xgene: Preparing for adding 10GbE support   Iyappan Subramanian
• [PATCH v4 5/6] drivers: net: xgene: Add 10GbE support   Iyappan Subramanian
• [PATCH v4 6/6] drivers: net: xgene: Add 10GbE ethtool support   Iyappan Subramanian
• [PATCH v1 0/3] Add SGMII based 1GbE support to APM X-Gene SoC ethernet driver   Iyappan Subramanian
• [PATCH v1 1/3] dtb: Add SGMII based 1GbE node to APM X-Gene SoC device tree   Iyappan Subramanian
• [PATCH v1 2/3] drivers: net: xgene: Add SGMII based 1GbE support   Iyappan Subramanian
• [PATCH v1 3/3] drivers: net: xgene: Add SGMII based 1GbE ethtool support   Iyappan Subramanian
• [PATCH v1 2/3] drivers: net: xgene: Add SGMII based 1GbE support   Iyappan Subramanian
• [PATCH v2 0/4] Add SGMII based 1GbE support to APM X-Gene SoC ethernet driver   Iyappan Subramanian
• [PATCH v2 1/4] dtb: Add SGMII based 1GbE node to APM X-Gene SoC device tree   Iyappan Subramanian
• [PATCH v2 2/4] drivers: net: xgene: Preparing for adding SGMII based 1GbE   Iyappan Subramanian
• [PATCH v2 3/4] drivers: net: xgene: Add SGMII based 1GbE support   Iyappan Subramanian
• [PATCH v2 4/4] drivers: net: xgene: Add SGMII based 1GbE ethtool support   Iyappan Subramanian
• [PATCH v1 0/2] drivers: net: xgene: Fix crash for backward compatibility   Iyappan Subramanian
• [PATCH v1 1/2] dtb: xgene: fix: Disable 10GbE and SGMII based 1GbE by default   Iyappan Subramanian
• [PATCH v1 2/2] drivers: net: xgene: fix: Use separate resources   Iyappan Subramanian
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Michal Suchanek
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Michal Suchanek
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Michal Suchanek
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Michal Suchanek
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Michal Suchanek
• [PATCH 1/4] ata: ahci_platform: Add ACPI support for AMD Seattle SATA controller   Suravee Suthikulanit
• [PATCH] arm64: amd-seattle: Adding device tree for AMD Seattle platform   Suravee Suthikulanit
• [PATCH] arm64: amd-seattle: Adding device tree for AMD Seattle platform   Suravee Suthikulanit
• [PATCH] arm64: amd-seattle: Adding device tree for AMD Seattle platform   Suravee Suthikulanit
• [PATCH V2] arm64: amd-seattle: Adding device tree for AMD Seattle platform   Suravee Suthikulanit
• [PATCH] arm64: amd-seattle: Adding device tree for AMD Seattle platform   Suravee Suthikulanit
• [RFC 1/4] arm64: amd-seattle: Adding device tree for AMD Seattle platform   Suravee Suthikulpanit
• [PATCH v3] drivers: of: add return value to of_reserved_mem_device_init   Marek Szyprowski
• next build: 304 warnings 0 failures (next/next-20141013)   Marek Szyprowski
• [PATCH v4] drivers: of: add return value to of_reserved_mem_device_init   Marek Szyprowski
• [PATCH] arm: dma-mapping: fix compilation error when CONFIG_MMU is not present   Marek Szyprowski
• [PATCH v3 0/2] serial: samsung: add support for early console   Marek Szyprowski
• [PATCH v3 1/2] serial: samsung: Add support for early console   Marek Szyprowski
• [PATCH v3 2/2] ARM: dts: exynos4: Add stdout-path properties   Marek Szyprowski
• [PATCH v2 11/18] iommu: exynos: remove useless device_add/remove callbacks   Marek Szyprowski
• [PATCH] arm: dma-mapping: fix compilation error when CONFIG_MMU is not present   Marek Szyprowski
• [PATCH] iommu: exynos: make driver multiarch friendly   Marek Szyprowski
• [PATCH 5/5] ARM: dts: Add dts files for Exynos4415 SoC   Marek Szyprowski
• [PATCH v6 0/7] Enable L2 cache support on Exynos4210/4x12 SoCs   Marek Szyprowski
• [PATCH v6 1/7] ARM: l2c: Refactor the driver to use commit-like interface   Marek Szyprowski
• [PATCH v6 2/7] ARM: l2c: Add interface to ask hypervisor to configure L2C   Marek Szyprowski
• [PATCH v6 3/7] ARM: l2c: Get outer cache .write_sec callback from mach_desc only if not NULL   Marek Szyprowski
• [PATCH v6 4/7] ARM: l2c: Add support for overriding prefetch settings   Marek Szyprowski
• [PATCH v6 5/7] ARM: EXYNOS: Add .write_sec outer cache callback for L2C-310   Marek Szyprowski
• [PATCH v6 6/7] ARM: EXYNOS: Add support for non-secure L2X0 resume   Marek Szyprowski
• [PATCH v6 7/7] ARM: dts: exynos4: Add nodes for L2 cache controller   Marek Szyprowski
• [RFC PATCH v3 5/7] dma-mapping: detect and configure IOMMU in of_dma_configure   Marek Szyprowski
• [PATCH v6 4/7] ARM: l2c: Add support for overriding prefetch settings   Marek Szyprowski
• [PATCH] arm: dma-mapping: fix compilation error when CONFIG_MMU is not present   Marek Szyprowski
• [PATCH v2 0/4] Low/high memory CMA reservation fixes   Marek Szyprowski
• [PATCH v7 0/8] Enable L2 cache support on Exynos4210/4x12 SoCs   Marek Szyprowski
• [PATCH v7 1/8] ARM: l2c: Refactor the driver to use commit-like interface   Marek Szyprowski
• [PATCH v7 2/8] ARM: l2c: Add interface to ask hypervisor to configure L2C   Marek Szyprowski
• [PATCH v7 3/8] ARM: l2c: Get outer cache .write_sec callback from mach_desc only if not NULL   Marek Szyprowski
• [PATCH v7 4/8] ARM: l2c: shorten warning about incorrect associativity   Marek Szyprowski
• [PATCH v7 5/8] ARM: l2c: Add support for overriding prefetch settings   Marek Szyprowski
• [PATCH v7 6/8] ARM: EXYNOS: Add .write_sec outer cache callback for L2C-310   Marek Szyprowski
• [PATCH v7 7/8] ARM: EXYNOS: Add support for non-secure L2X0 resume   Marek Szyprowski
• [PATCH v7 8/8] ARM: dts: exynos4: Add nodes for L2 cache controller   Marek Szyprowski
• [PATCH 1/3] qe-uart: modify qe-uart to adapt both powerpc and arm   Timur Tabi
• [PATCH v2] arm: prevent BUG_ON in audit_syscall_entry()   AKASHI Takahiro
• [PATCH v6 2/6] arm64: ptrace: allow tracer to skip a system call   AKASHI Takahiro
• [RFC v2] arm64: kgdb: fix single stepping   AKASHI Takahiro
• [PATCH v7 0/6] arm64: add seccomp support   AKASHI Takahiro
• [PATCH v7 1/6] arm64: ptrace: add PTRACE_SET_SYSCALL   AKASHI Takahiro
• [PATCH v7 2/6] arm64: ptrace: allow tracer to skip a system call   AKASHI Takahiro
• [PATCH v7 3/6] asm-generic: add generic seccomp.h for secure computing mode 1   AKASHI Takahiro
• [PATCH v7 4/6] arm64: add seccomp syscall for compat task   AKASHI Takahiro
• [PATCH v7 5/6] arm64: add SIGSYS siginfo for compat task   AKASHI Takahiro
• [PATCH v7 6/6] arm64: add seccomp support   AKASHI Takahiro
• [RFC v2] arm64: kgdb: fix single stepping   AKASHI Takahiro
• [PATCH v6 2/6] arm64: ptrace: allow tracer to skip a system call   AKASHI Takahiro
• [PATCH v7 1/6] arm64: ptrace: add PTRACE_SET_SYSCALL   AKASHI Takahiro
• [PATCH v7 5/6] arm64: add SIGSYS siginfo for compat task   AKASHI Takahiro
• [PATCH v7 2/6] arm64: ptrace: allow tracer to skip a system call   AKASHI Takahiro
• [PATCH] arm64: kgdb: fix single stepping   AKASHI Takahiro
• [PATCH] arm64: kgdb: fix single stepping   AKASHI Takahiro
• [PATCHv4] clk: ppc-corenet: rename to ppc-qoriq and add CLK_OF_DECLARE support   Yuantian Tang
• [PATCH v6 07/12] usb: chipidea: add a usb2 driver for ci13xxx   Antoine Tenart
• [PATCH 0/2] net: spider_net: fix possible bitops errors   Antoine Tenart
• [PATCH] net: pxa168_eth: avoid using signed char for bitops   Antoine Tenart
• [PATCH 1/2] net: spider_net: do not read mac address again after setting it   Antoine Tenart
• [PATCH 2/2] net: spider_net: avoid using signed char for bitops   Antoine Tenart
• [PATCH] net: pxa168_eth: avoid using signed char for bitops   Antoine Tenart
• [PATCH RESEND] net: pxa168_eth: avoid using signed char for bitops   Antoine Tenart
• [PATCH 2/2] net: spider_net: avoid using signed char for bitops   Antoine Tenart
• [PATCH RFT 0/8] Marvell PXA168 libphy handling and Berlin Ethernet   Antoine Tenart
• [PATCH 4/5] ARM: berlin: Add AHCI and SATA PHY nodes to BG2   Antoine Tenart
• [PATCH 0/5] Berlin BG2 AHCI and SATA PHY   Antoine Tenart
• [PATCH 4/4] pinctrl: berlin: use the generic node to map function   Antoine Tenart
• [PATCH RFT 0/8] Marvell PXA168 libphy handling and Berlin Ethernet   Antoine Tenart
• [PATCH 04/29] ncr5380: Remove unused macros   Finn Thain
• [PATCH 08/29] ncr5380: Remove redundant AUTOSENSE macro   Finn Thain
• [PATCH 12/29] ncr5380: Cleanup host info() methods   Finn Thain
• [PATCH 13/29] ncr5380: Move static PDMA spin counters to host data   Finn Thain
• [PATCH 15/29] ncr5380: Remove *_RELEASE macros   Finn Thain
• [PATCH 16/29] ncr5380: Drop legacy scsi.h include   Finn Thain
• [PATCH v2 04/36] ncr5380: Remove unused macros   Finn Thain
• [PATCH v2 08/36] ncr5380: Remove redundant AUTOSENSE macro   Finn Thain
• [PATCH v2 10/36] ncr5380: Fix SCSI_IRQ_NONE bugs   Finn Thain
• [PATCH v2 12/36] ncr5380: Cleanup host info() methods   Finn Thain
• [PATCH v2 13/36] ncr5380: Move static PDMA spin counters to host data   Finn Thain
• [PATCH v2 15/36] ncr5380: Remove *_RELEASE macros   Finn Thain
• [PATCH v2 16/36] ncr5380: Drop legacy scsi.h include   Finn Thain
• [PATCHv2 0/4] Add Altera peripheral memories to EDAC framework   Thor Thayer
• [PATCHv2 0/4] Add Altera peripheral memories to EDAC framework   Thor Thayer
• [PATCHv2 0/4] Add Altera peripheral memories to EDAC framework   Thor Thayer
• [PATCH] Route keyboard LEDs through the generic LEDs layer.   Samuel Thibault
• [PATCH] Route keyboard LEDs through the generic LEDs layer.   Samuel Thibault
• [PATCH v4] dma: Add Xilinx AXI Direct Memory Access Engine driver support   Srikanth Thokala
• [PATCH v4] dma: Add Xilinx AXI Direct Memory Access Engine driver support   Srikanth Thokala
• [PATCH 3.17-rc4 v7 0/6] arm: Implement arch_trigger_all_cpu_backtrace   Daniel Thompson
• [PATCH 3.17-rc4 v7 0/6] arm: Implement arch_trigger_all_cpu_backtrace   Daniel Thompson
• [PATCH 3.17-rc4 v7 0/6] arm: Implement arch_trigger_all_cpu_backtrace   Daniel Thompson
• [PATCH v12 00/15] arm: Fix DEBUG_LL for multi-platform kernels (without PL01X)   Daniel Thompson
• [PATCH v12 01/15] arm: cnx3xxxx: Remove spurious default for DEBUG_CNS3XXX   Daniel Thompson
• [PATCH v12 02/15] arm: iop32x: Enable DEBUG_LL_UART_8250   Daniel Thompson
• [PATCH v12 03/15] arm: iop33x: Enable DEBUG_LL_UART_8250   Daniel Thompson
• [PATCH v12 04/15] arm: ixp4xx: Enable DEBUG_LL_UART_8250   Daniel Thompson
• [PATCH v12 05/15] arm: lpc32xx: Enable DEBUG_LL_UART_8250   Daniel Thompson
• [PATCH v12 06/15] arm: mv78xx0: Enable DEBUG_LL_UART_8250   Daniel Thompson
• [PATCH v12 07/15] arm: orion5x: Enable DEBUG_LL_UART_8250   Daniel Thompson
• [PATCH v12 08/15] arm: rpc: Enable DEBUG_LL_UART_8250   Daniel Thompson
• [PATCH v12 09/15] arm: Remove DEBUG_LL_UART_NONE   Daniel Thompson
• [PATCH v12 10/15] arm: ks8695: Migrate debug_ll macros to shared directory   Daniel Thompson
• [PATCH v12 11/15] arm: omap1: Migrate debug_ll macros to use 8250.S   Daniel Thompson
• [PATCH v12 12/15] arm: netx: Migrate DEBUG_LL macros to shared directory   Daniel Thompson
• [PATCH v12 13/15] arm: sa1100: Migrate DEBUG_LL macros to shared directory   Daniel Thompson
• [PATCH v12 14/15] arm: Seperate DEBUG_UART_PHYS from DEBUG_LL on EP93XX   Daniel Thompson
• [PATCH v12 15/15] arm: Fix DEBUG_LL for multi-platform kernels (without PL01X)   Daniel Thompson
• [PATCH 1/2] tty: serial: msm: Fix sysrq spinlock recursion on non-DM   Daniel Thompson
• [PATCH 2/2] tty: serial: msm: Support sysrq on uartDM devices   Daniel Thompson
• [PATCH 2/2] tty: serial: msm: Support sysrq on uartDM devices   Daniel Thompson
• Differences between tlv320aic3x and tlv320aic31xx   Benoît Thébaudeau
• [PATCH v5 07/11] mmc: sdio: Convert to dev_pm_domain_attach|detach()   Dmitry Torokhov
• [PATCH v7 1/5] thermal: rockchip: add driver for thermal   Dmitry Torokhov
• [PATCH 2/2] input: cros_ec_keyb: Add of match table   Dmitry Torokhov
• [PATCH v8 1/5] thermal: rockchip: add driver for thermal   Dmitry Torokhov
• [PATCH v8 1/5] thermal: rockchip: add driver for thermal   Dmitry Torokhov
• [PATCH v11 4/5] ARM: dts: add main Thermal info to rk3288   Dmitry Torokhov
• [PATCH v11 1/5] thermal: rockchip: add driver for thermal   Dmitry Torokhov
• [PATCH v11 1/5] thermal: rockchip: add driver for thermal   Dmitry Torokhov
• [PATCH v2 3/4] ARM: dts: sun5i: Add lradc node   Dmitry Torokhov
• [PATCH v3 1/6] pinctrl: rockchip: add suspend/resume functions   Dmitry Torokhov
• [PATCH v5 1/3] power-domain: add power domain drivers for Rockchip platform   Dmitry Torokhov
• [PATCH v2 1/3] PM / clock_ops: Add pm_clk_add_clk()   Dmitry Torokhov
• [PATCH v5 1/3] power-domain: add power domain drivers for Rockchip platform   Dmitry Torokhov
• [PATCH v2 1/3] PM / clock_ops: Add pm_clk_add_clk()   Dmitry Torokhov
• [PATCH v2 1/3] PM / clock_ops: Add pm_clk_add_clk()   Dmitry Torokhov
• [PATCH v2 1/3] PM / clock_ops: Add pm_clk_add_clk()   Dmitry Torokhov
• [PATCH v3 1/5] PM / clock_ops: Add pm_clk_add_clk()   Dmitry Torokhov
• [PATCH v3 1/5] PM / clock_ops: Add pm_clk_add_clk()   Dmitry Torokhov
• [PATCH v13 4/5] ARM: dts: add main Thermal info to rk3288   Dmitry Torokhov
• [PATCH v13 3/5] ARM: dts: add RK3288 Thermal data   Dmitry Torokhov
• [PATCH v13 1/5] thermal: rockchip: add driver for thermal   Dmitry Torokhov
• [PATCH v13 4/5] ARM: dts: add main Thermal info to rk3288   Dmitry Torokhov
• [PATCH v13 4/5] ARM: dts: add main Thermal info to rk3288   Dmitry Torokhov
• [PATCH v13 4/5] ARM: dts: add main Thermal info to rk3288   Dmitry Torokhov
• [PATCH v13 1/5] thermal: rockchip: add driver for thermal   Dmitry Torokhov
• [PATCH v2 2/3] ARM: keystone: pm: switch to use generic pm domains   Dmitry Torokhov
• [PATCH v7 1/3] power-domain: add power domain drivers for Rockchip platform   Dmitry Torokhov
• [PATCH v7 1/3] power-domain: add power domain drivers for Rockchip platform   Dmitry Torokhov
• [PATCH 04/15] input: convert LoCoMo keyboard driver to use new locomo core   Dmitry Torokhov
• [PATCH v14 3/5] ARM: dts: add RK3288 Thermal data   Dmitry Torokhov
• [PATCH v14 4/5] ARM: dts: add main Thermal info to rk3288   Dmitry Torokhov
• [PATCH v14 5/5] ARM: dts: enable Thermal on rk3288-evb board   Dmitry Torokhov
• [PATCH v14 2/5] dt-bindings: document Rockchip thermal   Dmitry Torokhov
• [PATCH v14 1/5] thermal: rockchip: add driver for thermal   Dmitry Torokhov
• [PATCH v14 2/5] dt-bindings: document Rockchip thermal   Dmitry Torokhov
• [PATCH v15 1/5] thermal: rockchip: add driver for thermal   Dmitry Torokhov
• [PATCH v15 2/5] dt-bindings: document Rockchip thermal   Dmitry Torokhov
• [PATCH v3 4/9] drivercore / platform: Keep PM domain powered during ->probe()   Dmitry Torokhov
• [PATCH v7 0/3] ARM: rk3288 : Add PM Domain support   Dmitry Torokhov
• [PATCH] ARM: Blacklist GCC 4.8.0 to GCC 4.8.2 - PR58854   Linus Torvalds
• [PATCH 1/2] ARM: i.MX53: add IPU CSI port nodes   Steffen Trumtrar
• [PATCH 2/2] ARM: i.MX53: dts: add sahara module   Steffen Trumtrar
• [PATCH 1/3] ARM: socfpga: cleanup socfpga_defconfig   Steffen Trumtrar
• [PATCH 2/3] ARM: socfpga: enable PL330_DMA   Steffen Trumtrar
• [PATCH 3/3] ARM: socfpga: enable INOTIFY_USER   Steffen Trumtrar
• [PATCH 3/3] ARM: socfpga: enable INOTIFY_USER   Steffen Trumtrar
• [PATCHv3 1/2] ARM: dts: socfpga: Fix SD card detect   Steffen Trumtrar
• [PATCH 1/2] ARM: socfpga: Add driver for the L3 interconnect   Steffen Trumtrar
• [PATCH 2/2] ARM: dts: socfpga: Add l3nic node   Steffen Trumtrar
• [PATCH 1/2] ARM: socfpga: Add driver for the L3 interconnect   Steffen Trumtrar
• [PATCH v2 1/7] ARM: sunxi: Introduce Allwinner A80 support   Chen-Yu Tsai
• [PATCH 3/3] ARM: sun7i: cubieboard2: Enable the AXP209   Chen-Yu Tsai
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   Chen-Yu Tsai
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   Chen-Yu Tsai
• [PATCH v2 4/7] ARM: dts: sun9i: Add A80 Optimus Board support   Chen-Yu Tsai
• [PATCH 3/3] ARM: sun7i: cubieboard2: Enable the AXP209   Chen-Yu Tsai
• [PATCH v2 4/7] clk: sunxi: unify sun6i AHB1 clock with proper PLL6 pre-divider   Chen-Yu Tsai
• [PATCH v2 4/7] clk: sunxi: unify sun6i AHB1 clock with proper PLL6 pre-divider   Chen-Yu Tsai
• [PATCH v3 0/5] ARM: sunxi: Add basic support for Allwinner A80 SoC   Chen-Yu Tsai
• [PATCH v3 1/5] ARM: sunxi: Introduce Allwinner A80 support   Chen-Yu Tsai
• [PATCH v3 2/5] ARM: dts: sunxi: Add Allwinner A80 dtsi   Chen-Yu Tsai
• [PATCH v3 3/5] ARM: dts: sun9i: Add A80 Optimus Board support   Chen-Yu Tsai
• [PATCH v3 4/5] devicetree: bindings: Document supported Allwinner sunxi SoCs   Chen-Yu Tsai
• [PATCH v3 5/5] Documentation: sunxi: Add A80 datasheet link   Chen-Yu Tsai
• [PATCH v3 3/5] ARM: dts: sun9i: Add A80 Optimus Board support   Chen-Yu Tsai
• [PATCH v2 7/7] ARM: dts: sun6i: Add required ahb1 clock parent and rates for dma controller   Chen-Yu Tsai
• [PATCH 0/7] clk: sun6i: Unify AHB1 clock and fix rate calculation   Chen-Yu Tsai
• [PATCH 0/5] clk: sunxi: Add peripheral bus clock support for A80   Chen-Yu Tsai
• [PATCH 1/5] clk: sunxi: make factors clock mux mask configurable   Chen-Yu Tsai
• [PATCH 2/5] clk: sunxi: Add support for A80 basic bus clocks   Chen-Yu Tsai
• [PATCH 3/5] clk: sunxi: Add support for bus clock gates on Allwinner A80 SoC   Chen-Yu Tsai
• [PATCH 4/5] ARM: sunxi: Select ARCH_HAS_RESET_CONTROLLER and RESET_CONTROLLER for sun9i   Chen-Yu Tsai
• [PATCH 5/5] ARM: dts: sun9i: Add basic clocks and reset controls   Chen-Yu Tsai
• [linux-sunxi] [PATCH 0/5] clk: sunxi: Add peripheral bus clock support for A80   Chen-Yu Tsai
• [PATCH 2/5] clk: sunxi: Add support for A80 basic bus clocks   Chen-Yu Tsai
• [PATCH 26/26] ARM: sun8i: q8h: Relicense the device tree under GPLv2/X11   Chen-Yu Tsai
• [PATCH 2/5] clk: sunxi: Add support for A80 basic bus clocks   Chen-Yu Tsai
• [PATCH v2 0/5] clk: sunxi: Add peripheral bus clock support for A80   Chen-Yu Tsai
• [PATCH v2 1/5] clk: sunxi: make factors clock mux mask configurable   Chen-Yu Tsai
• [PATCH v2 2/5] clk: sunxi: Add support for A80 basic bus clocks   Chen-Yu Tsai
• [PATCH v2 3/5] clk: sunxi: Add support for bus clock gates on Allwinner A80 SoC   Chen-Yu Tsai
• [PATCH v2 4/5] ARM: sunxi: Select ARCH_HAS_RESET_CONTROLLER and RESET_CONTROLLER for sun9i   Chen-Yu Tsai
• [PATCH v2 5/5] ARM: dts: sun9i: Add basic clocks and reset controls   Chen-Yu Tsai
• [RFC 0/3] ARM: sun9i: Add PRCM clocks and reset controls support   Chen-Yu Tsai
• [RFC 1/3] clk: sunxi: sun6i-apb0: Add support for sun9i A80 apbs gates   Chen-Yu Tsai
• [RFC 2/3] mfd: sun6i-prcm: Add support for PRCM found on Allwinner A80 SoC   Chen-Yu Tsai
• [RFC 3/3] ARM: dts: sun9i: Add A80 PRCM clocks and reset control nodes   Chen-Yu Tsai
• [PATCH 3/4] ARM: sun9i: Enable the A80 pinctrl driver   Chen-Yu Tsai
• [PATCH 0/6] ARM: sun9i: Enable extra uarts, leds and i2c controllers   Chen-Yu Tsai
• [PATCH 1/6] ARM: dts: sun9i: Add i2c controller nodes to a80 dtsi   Chen-Yu Tsai
• [PATCH 2/6] ARM: dts: sun9i: Add i2c3 pinmux setting for A80 SoC   Chen-Yu Tsai
• [PATCH 3/6] ARM: dts: sun9i: Enable i2c3 on A80 Optimus board   Chen-Yu Tsai
• [PATCH 4/6] ARM: dts: sun9i: Add GPIO LEDs for A80 Optimus board   Chen-Yu Tsai
• [PATCH 5/6] ARM: dts: sun9i: Add uart4 pinmux setting for A80 SoC   Chen-Yu Tsai
• [PATCH 6/6] ARM: dts: sun9i: Enable uart4 for A80 Optimus board   Chen-Yu Tsai
• [PATCH 4/6] ARM: dts: sun9i: Add GPIO LEDs for A80 Optimus board   Chen-Yu Tsai
• [linux-sunxi] [PATCH 4/6] ARM: dts: sun9i: Add GPIO LEDs for A80 Optimus board   Chen-Yu Tsai
• [PATCH 4/6] ARM: dts: sun9i: Add GPIO LEDs for A80 Optimus board   Chen-Yu Tsai
• [RFC 0/3] ARM: sun9i: Add PRCM clocks and reset controls support   Chen-Yu Tsai
• [PATCH 1/5] phy: sun4i: add support for USB phy0   Chen-Yu Tsai
• [PATCH v2 0/6] ARM: sun9i: Enable extra uarts, leds and i2c controllers   Chen-Yu Tsai
• [PATCH v2 1/6] ARM: dts: sun9i: Add i2c controller nodes to a80 dtsi   Chen-Yu Tsai
• [PATCH v2 2/6] ARM: dts: sun9i: Add i2c3 pinmux setting for A80 SoC   Chen-Yu Tsai
• [PATCH v2 3/6] ARM: dts: sun9i: Enable i2c3 on A80 Optimus board   Chen-Yu Tsai
• [PATCH v2 4/6] ARM: dts: sun9i: Add GPIO LEDs for A80 Optimus board   Chen-Yu Tsai
• [PATCH v2 5/6] ARM: dts: sun9i: Add uart4 pinmux setting for A80 SoC   Chen-Yu Tsai
• [PATCH v2 6/6] ARM: dts: sun9i: Enable uart4 for A80 Optimus board   Chen-Yu Tsai
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Mike Turquette
• [GIT PULL] some more Rockchip clock changes for 3.18   Mike Turquette
• [GIT PULL] clk: mvebu: Last change for v3.18   Mike Turquette
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   Mike Turquette
• Fixing boot-time hiccups in your display   Mike Turquette
• [PATCH v1] clk: pxa clocks build system fix   Mike Turquette
• [PATCH v1] clk: pxa clocks build system fix   Mike Turquette
• [PATCH v2 4/4] clk: Use ww_mutexes for clk_prepare_{lock/unlock}   Mike Turquette
• [PATCH 09/13] dmaengine: edma: check for echan->edesc => NULL in edma_dma_pause()   Peter Ujfalusi
• [PATCH/RFC v2 1/4] ARM: hw_breakpoint: Add arm_dbg_regs_available flag   Geert Uytterhoeven
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Geert Uytterhoeven
• [PATCH/RFC v2 1/4] ARM: hw_breakpoint: Add arm_dbg_regs_available flag   Geert Uytterhoeven
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Geert Uytterhoeven
• [PATCH] [RFC] ARM: shmobile: Add early debugging support using SCIF(A)   Geert Uytterhoeven
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Geert Uytterhoeven
• [PATCH] [RFC] ARM: shmobile: Add early debugging support using SCIF(A)   Geert Uytterhoeven
• [PATCH 12/29] ncr5380: Cleanup host info() methods   Geert Uytterhoeven
• [PATCH] [RFC] ARM: shmobile: Add early debugging support using SCIF(A)   Geert Uytterhoeven
• [PATCH] serial/core: Initialize the console pm state   Geert Uytterhoeven
• [PATCH] ARM: shmobile: r7s72100: Remove r7s72100-genmai.dtb for ARCH_SHMOBILE_LEGACY   Geert Uytterhoeven
• [PATCH v2 00/11] ARM: shmobile: r8a7740/armadillo800eva legacy PM domain support   Geert Uytterhoeven
• [PATCH v3 07/13] ARM: shmobile: R-Mobile: Use generic_pm_domain.attach_dev() for pm_clk setup   Geert Uytterhoeven
• [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   Geert Uytterhoeven
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   Geert Uytterhoeven
• [PATCH] [RFC] ARM: shmobile: Add early debugging support using SCIF(A)   Geert Uytterhoeven
• [PATCH] [RFC] ARM: shmobile: Add early debugging support using SCIF(A)   Geert Uytterhoeven
• [PATCH] [RFC] ARM: shmobile: Add early debugging support using SCIF(A)   Geert Uytterhoeven
• Fixing boot-time hiccups in your display   Geert Uytterhoeven
• [PATCH v2 5/5] simplefb: add clock handling code   Geert Uytterhoeven
• [PATCH 04/44] m68k: Replace mach_power_off with pm_power_off   Geert Uytterhoeven
• [PATCH 35/44] m68k: Register with kernel poweroff handler   Geert Uytterhoeven
• [PATCH] [RFC] ARM: shmobile: Add early debugging support using SCIF(A)   Geert Uytterhoeven
• [PATCH] [RFC] ARM: shmobile: Add early debugging support using SCIF(A)   Geert Uytterhoeven
• [PATCH] [RFC] ARM: shmobile: Add early debugging support using SCIF(A)   Geert Uytterhoeven
• [PATCH resend] arm:extend the reserved memory for initrd to be page aligned   Geert Uytterhoeven
• [PATCH 01/44] kernel: Add support for poweroff handler call chain   Geert Uytterhoeven
• [PATCH 1/4] ARM: shmobile: r8a7790: Add RGX clock to device tree   Geert Uytterhoeven
• [PATCH 3/4] ARM: shmobile: r8a7790: Add MMP clock to device tree   Geert Uytterhoeven
• [PATCH v2 2/2] Documentation: dmaengine: Add a documentation for the dma controller API   Geert Uytterhoeven
• [PATCH 0/4] ARM: shmobile: Add clock to DT   Geert Uytterhoeven
• [PATCH v3 1/3] power-domain: add power domain drivers for Rockchip platform   Geert Uytterhoeven
• [PATCH v4] ARM: perf: save/restore pmu registers in pm notifier   Geert Uytterhoeven
• [PATCH v5 1/3] power-domain: add power domain drivers for Rockchip platform   Geert Uytterhoeven
• [PATCH v2 2/3] ARM: keystone: pm: switch to use generic pm domains   Geert Uytterhoeven
• [PATCH v2 2/3] ARM: keystone: pm: switch to use generic pm domains   Geert Uytterhoeven
• [PATCH v2] ARM: shmobile: Add early debugging support using SCIF(A)   Geert Uytterhoeven
• [PATCH v2] ARM: shmobile: Add early debugging support using SCIF(A)   Geert Uytterhoeven
• [PATCH v2] ARM: shmobile: Add early debugging support using SCIF(A)   Geert Uytterhoeven
• [PATCH v3 00/11] ARM: shmobile: r8a7740/armadillo800eva legacy PM domain support   Geert Uytterhoeven
• [PATCH v3 01/11] ARM: shmobile: r8a7740: Add missing A3SP pm domain devices   Geert Uytterhoeven
• [PATCH v3 02/11] ARM: shmobile: r8a7740: Add missing A4S pm domain devices   Geert Uytterhoeven
• [PATCH v3 03/11] ARM: shmobile: armadillo800eva legacy: Add missing A3SP pm domain devices   Geert Uytterhoeven
• [PATCH v3 04/11] ARM: shmobile: armadillo800eva legacy: Add missing A4S pm domain devices   Geert Uytterhoeven
• [PATCH v3 05/11] ARM: shmobile: r8a7740: Add A3RV pm domain support   Geert Uytterhoeven
• [PATCH v3 06/11] ARM: shmobile: r8a7740: Add A3SG pm domain support   Geert Uytterhoeven
• [PATCH v3 07/11] ARM: shmobile: r8a7740/armadillo legacy: Add A4MP pm domain support   Geert Uytterhoeven
• [PATCH v3 08/11] ARM: shmobile: r8a7740: Add D4 pm domain support   Geert Uytterhoeven
• [PATCH v3 09/11] ARM: shmobile: r8a7740/armadillo legacy: Add A4R pm domain support   Geert Uytterhoeven
• [PATCH v3 10/11] ARM: shmobile: r8a7740: Add A4SU pm domain support   Geert Uytterhoeven
• [PATCH v3 11/11] ARM: shmobile: r8a7740: Add A3SM pm domain support   Geert Uytterhoeven
• [PATCH/RFC] ARM: shmobile: sh7372: Keep D4 pm domain powered   Geert Uytterhoeven
• Koelsch boot broken on 3.18-rc1 ?   Geert Uytterhoeven
• Koelsch boot broken on 3.18-rc1 ?   Geert Uytterhoeven
• [PATCH 4/4] mm: cma: Use %pa to print physical addresses   Geert Uytterhoeven
• [PATCH 1/2] ARM: shmobile: r8a73a4: Add SoC-specific CMT compatible property   Geert Uytterhoeven
• [PATCH 2/2] ARM: shmobile: r8a7778: Add SoC-specific TMU compatible property   Geert Uytterhoeven
• [PATCH v3 07/11] ARM: shmobile: r8a7740/armadillo legacy: Add A4MP pm domain support   Geert Uytterhoeven
• [PATCH/RFC] ARM: shmobile: sh7372: Keep D4 pm domain powered   Geert Uytterhoeven
• [PATCH/RFC] ARM: shmobile: sh7372: Keep D4 pm domain powered   Geert Uytterhoeven
• [PATCH 4/4] PM / Domains: Let the ->attach_dev() callback return an error code   Geert Uytterhoeven
• [PATCH 4/4] PM / Domains: Let the ->attach_dev() callback return an error code   Geert Uytterhoeven
• [PATCH 4/4] PM / Domains: Let the ->attach_dev() callback return an error code   Geert Uytterhoeven
• [PATCH 4/4] PM / Domains: Let the ->attach_dev() callback return an error code   Geert Uytterhoeven
• [PATCH/RFC] ARM: shmobile: koelsch: Fix SPI mode of SPI-Flash into mode3   Geert Uytterhoeven
• [PATCH/RFC] ARM: shmobile: koelsch: Add MSIOF1 support to device tree   Geert Uytterhoeven
• [PATCH/RFC] ARM: shmobile: lager: Fix SPI mode of SPI-Flash into mode3   Geert Uytterhoeven
• [PATCH/RFC] ARM: shmobile: lager: Fix node name of GPIO keys   Geert Uytterhoeven
• [PATCH 0/2] ARM: shmobile: r8a7790: Fix SD3CKCR address   Geert Uytterhoeven
• [PATCH 1/3] ARM: shmobile: r8a7794: Add SGX clock to device tree   Geert Uytterhoeven
• [PATCH 3/3] ARM: shmobile: r8a7794: Add MMP and VSP1 clocks to device tree   Geert Uytterhoeven
• [PATCH] ARM: shmobile: koelsch: Fix flash partition label and size in device tree   Geert Uytterhoeven
• [PATCH] PM / Domains: Change prototype for the ->attach_dev() callback   Geert Uytterhoeven
• [PATCH RESEND] serial: mxs-auart: add sysrq support   Janusz Uzycki
• [PATCH RESEND] serial: mxs-auart: add sysrq support   Janusz Uzycki
• [PATCH v2 RESEND] serial: mxs-auart: add sysrq support   Janusz Uzycki
• [PATCH v4 0/4] serial: mxs-auart: gpios as modem signals   Janusz Uzycki
• [PATCH v4 1/4] serial: mxs-auart: clean get_mctrl and set_mctrl   Janusz Uzycki
• [PATCH v4 2/4] serial: mxs-auart: use mctrl_gpio helpers for handling modem signals   Janusz Uzycki
• [PATCH v4 3/4] serial: mxs-auart: add interrupts for modem control lines   Janusz Uzycki
• [PATCH v4 4/4] serial: mxs-auart: enable PPS support   Janusz Uzycki
• clk_set_rate, mux does not switch over, reparenting   Janusz Użycki
• [PATCH] serial: mxs-auart: add sysrq support   Janusz Użycki
• [PATCH 3/4] serial: mxs-auart: add interrupts for modem control lines   Janusz Użycki
• [PATCH v4 2/4] serial: mxs-auart: use mctrl_gpio helpers for handling modem signals   Janusz Użycki
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Tomi Valkeinen
• [PATCH 1/3] video: fbdev: omap2: omapfb: remove __exit annotation   Tomi Valkeinen
• [PATCH 2/3] video: fbdev: omap2: omapfb: add missing MODULE_ALIAS()   Tomi Valkeinen
• [PATCH 3/3] arm: boot: dts: am437x-sk: fix lcd enable pin mux data   Tomi Valkeinen
• [PATCH 2/3] video: fbdev: omap2: omapfb: add missing MODULE_ALIAS()   Tomi Valkeinen
• [PATCH 1/3] video: fbdev: omap2: omapfb: remove __exit annotation   Tomi Valkeinen
• [PATCH 2/3] video: fbdev: omap2: omapfb: add missing MODULE_ALIAS()   Tomi Valkeinen
• [PATCH] drivers: video: fbdev: atmel_lcdfb.c: remove unnecessary header   Tomi Valkeinen
• [PATCH v4 0/5] simplefb: add clock handling code   Tomi Valkeinen
• [PATCH 3/5] fbdev: sa1100fb: make use of device clock   Tomi Valkeinen
• [linux-sunxi] Re: [PATCH v4 0/5] simplefb: add clock handling code   Tomi Valkeinen
• Nokia n900 problems in 3.18-rc1 (was Re: USB Ethernet gadget on Nokia n900)   Tomi Valkeinen
• [PATCH v4 0/5] simplefb: add clock handling code   Tomi Valkeinen
• [PATCH] ARM: DT: apq8064: Add Support for SD Card Detect for ifc6410 board   Stanimir Varbanov
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Luc Verhaegen
• [PATCH] ARM: davinci: Remove redundant casts   Rasmus Villemoes
• BUG (maybe) with find_get_entry()   Rabin Vincent
• RCU bug with v3.17-rc3 ?   Rabin Vincent
• [PATCH] tracing/syscalls: ignore numbers outside NR_syscalls' range   Rabin Vincent
• [PATCH 0/2] Per-user clock constraints   Tomeu Vizoso
• [PATCH 1/2] clk: Make clk API return per-user struct clk instances   Tomeu Vizoso
• [PATCH 2/2] clk: Add floor and ceiling constraints to clock rates   Tomeu Vizoso
• [PATCH] clk: ux500: Remove unused includes of linux/clk-private.h   Tomeu Vizoso
• [PATCH] mmc: sunxi: Remove unused includes of linux/clk-private.h   Tomeu Vizoso
• [PATCH 1/2] clk: Make clk API return per-user struct clk instances   Tomeu Vizoso
• [PATCH v2 0/8] Per-user clock constraints   Tomeu Vizoso
• [PATCH v2 6/8] clk: Change clk_ops->determine_rate to return a clk_hw as the best parent   Tomeu Vizoso
• [PATCH v2 7/8] clk: Make clk API return per-user struct clk instances   Tomeu Vizoso
• [PATCH 1/2] clk: Make clk API return per-user struct clk instances   Tomeu Vizoso
• [PATCH v2 0/8] Per-user clock constraints   Tomeu Vizoso
• [PATCH v3 0/8] Per-user clock constraints   Tomeu Vizoso
• [PATCH v3 6/8] clk: Change clk_ops->determine_rate to return a clk_hw as the best parent   Tomeu Vizoso
• [PATCH v3 7/8] clk: Make clk API return per-user struct clk instances   Tomeu Vizoso
• [PATCH 00/10] Tegra124 EMC (external memory controller) support   Tomeu Vizoso
• [PATCH 05/10] ARM: tegra: Add EMC to Tegra124 device tree   Tomeu Vizoso
• [PATCH 06/10] ARM: tegra: Add EMC timings to Jetson TK1 device tree   Tomeu Vizoso
• [PATCH v3 7/8] clk: Make clk API return per-user struct clk instances   Tomeu Vizoso
• [PATCH v3 01/12] clk: tegra: Implement memory-controller clock   Tomeu Vizoso
• [PATCH v4 0/8] Per-user clock constraints   Tomeu Vizoso
• [PATCH v4 6/8] clk: Change clk_ops->determine_rate to return a clk_hw as the best parent   Tomeu Vizoso
• [PATCH v4 7/8] clk: Make clk API return per-user struct clk instances   Tomeu Vizoso
• [PATCH v2 00/12] Tegra124 EMC (external memory controller) support   Tomeu Vizoso
• [PATCH v2 07/12] ARM: tegra: Add EMC to Tegra124 device tree   Tomeu Vizoso
• [PATCH v2 08/12] ARM: tegra: Add EMC timings to Jetson TK1 device tree   Tomeu Vizoso
• [PATCH 0/3] Add support for Tegra Activity Monitor   Tomeu Vizoso
• [PATCH 3/3] ARM: tegra: Add Tegra124 ACTMON support   Tomeu Vizoso
• [PATCH v3 00/13] Tegra124 EMC (external memory controller) support   Tomeu Vizoso
• [PATCH v3 07/13] ARM: tegra: Add EMC to Tegra124 device tree   Tomeu Vizoso
• [PATCH v3 08/13] ARM: tegra: Add EMC timings to Jetson TK1 device tree   Tomeu Vizoso
• [PATCH v5 0/7] Per-user clock constraints   Tomeu Vizoso
• [PATCH v5 5/7] clk: Change clk_ops->determine_rate to return a clk_hw as the best parent   Tomeu Vizoso
• [PATCH v5 6/7] clk: Make clk API return per-user struct clk instances   Tomeu Vizoso
• [PATCH v1 0/3] gpio: Add APM X-Gene standy platform GPIO driver   Y Vo
• [PATCH v1 1/3] gpio: Add APM X-Gene standby GPIO controller driver   Y Vo
• [PATCH v1 2/3] Documentation: gpio: Add APM X-Gene standby GPIO controller DTS binding   Y Vo
• [PATCH v1 3/3] arm64:dts: Add APM X-Gene standby GPIO controller DTS entries   Y Vo
• [PATCH v1 1/3] gpio: Add APM X-Gene standby GPIO controller driver   Y Vo
• [PATCH v1 1/3] gpio: Add APM X-Gene standby GPIO controller driver   Y Vo
• [PATCH] gcov: add ARM64 to GCOV_PROFILE_ALL   Riku Voipio
• [PATCH] gcov: add ARM64 to GCOV_PROFILE_ALL   Riku Voipio
• [PATCH] gcov: add ARM64 to GCOV_PROFILE_ALL   Riku Voipio
• [PATCH] gcov: enable GCOV_PROFILE_ALL from ARCH Kconfigs   Riku Voipio
• [PATCH] MAINTAINERS: CNS3xxx and IXP4xx update.   Anton Vorontsov
• [PATCH] ARM: imx: refactor mxc_iomux_mode()   Dmitry Voytik
• [PATCH] ARM: imx: refactor mxc_iomux_mode()   Dmitry Voytik
• [Xen-devel] [RFC PATCH 14/16] x86/xen: support poweroff through poweroff handler call chain   David Vrabel
• [Xen-devel] [PATCH 1/2] xen/arm: remove handling of XENFEAT_grant_map_identity   David Vrabel
• [PATCH 2/2] xen/arm: introduce XENMEM_cache_flush   David Vrabel
• [PATCH v2 2/2] xen/arm: introduce GNTTABOP_cache_flush   David Vrabel
• [PATCH v2 2/2] xen/arm: introduce GNTTABOP_cache_flush   David Vrabel
• [Xen-devel] [PATCH v3 1/2] xen/arm: remove handling of XENFEAT_grant_map_identity   David Vrabel
• [Xen-devel] [PATCH v3 2/2] xen/arm: introduce GNTTABOP_cache_flush   David Vrabel
• [PATCH v4 6/7] xen/arm/arm64: introduce xen_arch_need_swiotlb   David Vrabel
• [Xen-devel] [PATCH v4 3/7] [RFC] arm/arm64: introduce is_dma_coherent   David Vrabel
• [PATCH V3 0/3] rtc: omap: Add support for regulator supply   Lokesh Vutla
• [PATCH V3 1/3] rtc: omap: use module_platform_driver   Lokesh Vutla
• [PATCH V3 2/3] rtc: omap: Update Kconfig for OMAP RTC   Lokesh Vutla
• [PATCH V3 3/3] rtc: omap: Support regulator supply for RTC   Lokesh Vutla
• [PATCH V3 3/3] rtc: omap: Support regulator supply for RTC   Lokesh Vutla
• [PATCH V4 3/3] rtc: omap: Support regulator supply for RTC   Lokesh Vutla
• [PATCH V3 3/3] rtc: omap: Support regulator supply for RTC   Lokesh Vutla
• [PATCH V4 0/3] rtc: omap: Add support for regulator supply   Lokesh Vutla
• [PATCH V4 1/3] rtc: omap: use module_platform_driver   Lokesh Vutla
• [PATCH V4 2/3] rtc: omap: Update Kconfig for OMAP RTC   Lokesh Vutla
• [PATCH V4 3/3] rtc: omap: Support regulator supply for RTC   Lokesh Vutla
• [PATCH v2 5/6] ARM: dts: imx53: add cpufreq-dt support   Stefan Wahren
• [PATCH RFC V3 0/3] mxs: add ocotp support for i.MX23 and i.MX28   Stefan Wahren
• [PATCH RFC V3 1/3] mxs: add binding for fsl ocotp   Stefan Wahren
• [PATCH RFC V3 2/3] mxs: add driver for ocotp in i.MX23 and i.MX28   Stefan Wahren
• [PATCH RFC V3 3/3] mxs: enable ocotp for i.MX23 and i.MX28   Stefan Wahren
• [PATCH RFC V3 2/3] mxs: add driver for ocotp in i.MX23 and i.MX28   Stefan Wahren
• [PATCH] mailbox: Enable BCM2835 mailbox support   Stefan Wahren
• [PATCH RFC V3 2/3] mxs: add driver for ocotp in i.MX23 and i.MX28   Stefan Wahren
• [PATCH 1/2] ARM: realview: basic device tree implementation   Linus Walleij
• [PATCH 2/2] ARM: realview: add device tree and bindings for PB1176   Linus Walleij
• [GIT PULL] RealView device tree support   Linus Walleij
• [PATCH 0/5] pinctrl: samsung: Data structure clean-up   Linus Walleij
• [PATCH] pinctrl: alter device tree bindings for functions   Linus Walleij
• [PATCH] pinctrl: specify bindings for pins and groups   Linus Walleij
• [PATCH] cpufreq: integrator: fix integrator_cpufreq_remove return type   Linus Walleij
• [PATCH 0/7] pinctrl: force-convert to generic DT bindings   Linus Walleij
• [PATCH 1/7] pinctrl: nomadik: force-convert to generic mux bindings   Linus Walleij
• [PATCH 2/7] pinctrl: abx500: force-convert to generic mux bindings   Linus Walleij
• [PATCH 3/7] pinctrl: nomadik: force-convert to generic config bindings   Linus Walleij
• [PATCH 4/7] pinctrl: abx500: force-convert to generic config bindings   Linus Walleij
• [PATCH 5/7] pinctrl: abx500: retire phandle config mechanism   Linus Walleij
• [PATCH 6/7] pinctrl: abx500: update device tree bindings   Linus Walleij
• [PATCH 7/7] pinctrl: abx500: mark pin config as generic   Linus Walleij
• [PATCH v2 2/4] ARM: mediatek: Add Pinctrl/GPIO driver for mt8135.   Linus Walleij
• [PATCH v2 3/4] dt-bindings: Add pinctrl bindings for mt65xx/mt81xx.   Linus Walleij
• [PATCH v2 4/4] ARM: dts: mt8135: Add pinctrl node for mt8135.   Linus Walleij
• [RFC] pinctrl driver for Zynq   Linus Walleij
• [RFC] pinctrl driver for Zynq   Linus Walleij
• [PATCH v4 0/6] Add initial support for pinctrl on Exynos7   Linus Walleij
• [PATCH v2 0/5] pinctrl: samsung: Data structure clean-up   Linus Walleij
• [PATCH v1 0/3] gpio: Add APM X-Gene standy platform GPIO driver   Linus Walleij
• preferable method for pinctrl driver   Linus Walleij
• [PATCH 1/8] ARM: realview: move DT GIC to FPGA node   Linus Walleij
• [PATCH 2/8] ARM: realview: add PL061 GPIO to the PB1176 DTS   Linus Walleij
• [PATCH 3/8] ARM: realview: add charlcd to PB1176 device tree   Linus Walleij
• [PATCH 4/8] ARM: realview: add RTC clocks to device tree   Linus Walleij
• [PATCH 5/8] ARM: realview: add PL022 SSP/SPI block to PB1176 DTS   Linus Walleij
• [PATCH 6/8] ARM: realview: add FPGA UART4 to PB1176 DTS   Linus Walleij
• [PATCH 7/8] ARM: realview: add KMIs to the PB1176 DTS   Linus Walleij
• [PATCH 8/8] ARM: realview: add MMCI to the PB1176 DTS   Linus Walleij
• [PATCH v4 2/4] gpio: vf610: add gpiolib/IRQ chip driver for Vybrid   Linus Walleij
• [PATCH] ARM: integrator: move AP timer to clocksource   Linus Walleij
• [PATCH] pinctrl: nomadik: amend MMC/SD pins   Linus Walleij
• [PATCH v2 3/4] dt-bindings: Add pinctrl bindings for mt65xx/mt81xx.   Linus Walleij
• [PATCH v2 4/4] ARM: dts: mt8135: Add pinctrl node for mt8135.   Linus Walleij
• [PATCH v2 4/4] ARM: dts: mt8135: Add pinctrl node for mt8135.   Linus Walleij
• [PATCH v2 2/4] ARM: mediatek: Add Pinctrl/GPIO driver for mt8135.   Linus Walleij
• [PATCH 1/3] pinctrl: add driver for Amlogic Meson SoCs   Linus Walleij
• [GIT PULL] RealView DeviceTree support for v3.19   Linus Walleij
• [GIT PULL] Integrator multiplatform migration for v3.19   Linus Walleij
• [PATCH 2/3] pinctrl: meson: add device tree bindings documentation   Linus Walleij
• [PATCH v5 0/6] Add initial support for pinctrl on Exynos7   Linus Walleij
• [PATCH v2 0/5] pinctrl: samsung: Data structure clean-up   Linus Walleij
• [PATCH v1 1/3] gpio: Add APM X-Gene standby GPIO controller driver   Linus Walleij
• [PATCH v5 1/4] pinctrl: imx: add gpio pinmux support for vf610   Linus Walleij
• [PATCH v5 2/4] gpio: vf610: add gpiolib/IRQ chip driver for Vybrid   Linus Walleij
• [PATCH v5 4/4] Documentation: dts: add bindings for Vybrid GPIO/PORT module   Linus Walleij
• [PATCH v5 3/4] ARM: dts: vf610: use new GPIO support   Linus Walleij
• [PATCH v2 12/47] mfd: ab8500-sysctrl: Register with kernel poweroff handler   Linus Walleij
• [PATCH] mfd: ab8500-sysctrl: Drop ab8500_restart   Linus Walleij
• [PATCH 02/12] dmaengine: coh901318: use dmaengine_terminate_all() API   Linus Walleij
• [PATCH 0/8] ARM: ux500: Add initial support for PM domains   Linus Walleij
• [PATCH 4/8] power: ab8500: Use power_supply_*() API for accessing function attrs   Linus Walleij
• [PATCH 7/7] mfd: ab8500: Decrement the power supply's device reference counter   Linus Walleij
• [PATCH 1/3] pinctrl: add driver for Amlogic Meson SoCs   Linus Walleij
• [PATCH 2/3] pinctrl: meson: add device tree bindings documentation   Linus Walleij
• [PATCH v2 1/3] pinctrl: add driver for Amlogic Meson SoCs   Linus Walleij
• [PATCH v2 2/3] pinctrl: meson: add device tree bindings documentation   Linus Walleij
• [PATCH v2 11/53] dmaengine: coh901318: Split device_control   Linus Walleij
• [PATCH v2 38/53] dmaengine: d40: Split device_control   Linus Walleij
• [PATCH RFC v2 1/8] pinctrl: Add driver for Zynq   Linus Walleij
• [PATCH RFC v2 2/8] pinctrl: pinconf-generic: Add flag to print arguments   Linus Walleij
• [PATCH RFC v2 3/8] pinctrl: pinconf-generic: Add parameter 'IO standard'   Linus Walleij
• [PATCH RFC v2 8/8] ARM: zynq: DT: Add pinctrl information   Linus Walleij
• [PATCH 4/4] pinctrl: berlin: use the generic node to map function   Linus Walleij
• [PATCH 1/4] pinctrl: rockchip: Set wake_enabled   Linus Walleij
• [PATCH v3 2/6] pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume   Linus Walleij
• [PATCH] pinctrl: at91: use own header   Linus Walleij
• [PATCH v4 1/6] pinctrl: rockchip: add suspend/resume functions   Linus Walleij
• [RFC] pinctrl: Provide a generic device tree binding for per-pin pin controllers   Linus Walleij
• [PATCH v2 3/4] pinctrl: rockchip: Parse pin groups before calling pinctrl_register()   Linus Walleij
• [PATCH v5 0/6] Add initial support for pinctrl on Exynos7   Linus Walleij
• [PATCH] pinctrl: at91: fix compilation   Linus Walleij
• [PATCH v1 1/3] gpio: Add APM X-Gene standby GPIO controller driver   Linus Walleij
• [PATCH 1/3] genirq: Allow the irqchip state of an IRQ to be save/restored   Linus Walleij
• [PATCH 2/3] irqchip: GIC: Add support for irq_{get, set}_irqchip_state   Linus Walleij
• [PATCH] ARM: l2c: Make l2x0_cache_size_of_parse() return 'int'   Linus Walleij
• [PATCH v2 1/4] pinctrl: sunxi: Add PN bank base pin   Linus Walleij
• [PATCH v2 2/4] pinctrl: sunxi: Add A80 pinctrl muxing options   Linus Walleij
• [PATCH v2 3/4] ARM: sun9i: Enable the A80 pinctrl driver   Linus Walleij
• [PATCH v2 4/4] ARM: sun9i: optimus: Set UART0 muxing   Linus Walleij
• [PATCH 06/17] gpio: mvebu: add suspend/resume support   Linus Walleij
• [PATCH 01/15] mfd: add new driver for Sharp LoCoMo   Linus Walleij
• [PATCH 02/15] GPIO: port LoCoMo gpio support from old driver   Linus Walleij
• [PATCH 09/15] ARM: sa1100: don't preallocate IRQ space for locomo   Linus Walleij
• [PATCH 14/15] gpio: locomo: implement per-pin irq handling   Linus Walleij
• [PATCH RFC v2 8/8] ARM: zynq: DT: Add pinctrl information   Linus Walleij
• [PATCH RFC v2 3/8] pinctrl: pinconf-generic: Add parameter 'IO standard'   Linus Walleij
• [RFC PATCH 1/2] pinctrl: Add output-disable   Linus Walleij
• [PATCH RESEND V4 3/9] of: Update Tegra XUSB pad controller binding for USB   Linus Walleij
• [PATCH 11/15] sound: soc: poodle: make use of new locomo GPIO interface   Linus Walleij
• [PATCH 1/3] genirq: Allow the irqchip state of an IRQ to be save/restored   Linus Walleij
• [PATCH RFC v2 8/8] ARM: zynq: DT: Add pinctrl information   Linus Walleij
• [PATCH 1/6] ARM: nomadik: move MMC/SD card detect GPIO to board DTS   Linus Walleij
• [PATCH 2/6] ARM: nomadik: disable chrystals in top level board files   Linus Walleij
• [PATCH 3/6] ARM: nomadik: move GPIO I2C to S8815 board file   Linus Walleij
• [PATCH 4/6] ARM: nomadik: set up MCDATDIR2   Linus Walleij
• [PATCH 5/6] ARM: nomadik: push ethernet down to board   Linus Walleij
• [PATCH 6/6] ARM: nomadik: device tree for NHK15 board   Linus Walleij
• [PATCH v6 1/7] pinctrl: rockchip: add suspend/resume functions   Linus Walleij
• Tegra baseline test results for v3.17-rc4   Paul Walmsley
• Tegra baseline test results for v3.17-rc5   Paul Walmsley
• Tegra baseline test results for v3.17-rc6   Paul Walmsley
• Tegra baseline test results for v3.17-rc7   Paul Walmsley
• OMAP baseline test results for v3.17-rc7   Paul Walmsley
• Tegra baseline test results for v3.17   Paul Walmsley
• OMAP baseline test results for v3.17   Paul Walmsley
• Tegra baseline test results for v3.18-rc1   Paul Walmsley
• Tegra baseline test results for v3.18-rc1   Paul Walmsley
• OMAP baseline test results for v3.18-rc1   Paul Walmsley
• OMAP baseline test results for v3.18-rc1   Paul Walmsley
• Tegra baseline test results for v3.18-rc2   Paul Walmsley
• OMAP baseline test results for v3.18-rc2   Paul Walmsley
• RE   Mrs.Christy Walton
• RE   Mrs.Christy Walton
• [PATCH] audio: sai: Add Power Management support   Alison Wang
• [PATCH v7 1/5] thermal: rockchip: add driver for thermal   Caesar Wang
• [PATCH v8 0/5] Rockchip soc thermal driver   Caesar Wang
• [PATCH v8 1/5] thermal: rockchip: add driver for thermal   Caesar Wang
• [PATCH v8 2/5] dt-bindings: document Rockchip thermal   Caesar Wang
• [PATCH v8 3/5] ARM: dts: add RK3288 Thermal data   Caesar Wang
• [PATCH v8 4/5] ARM: dts: add main Thermal info to rk3288   Caesar Wang
• [PATCH v8 5/5] ARM: dts: enable Thermal on rk3288-evb board   Caesar Wang
• [PATCH v8 1/5] thermal: rockchip: add driver for thermal   Caesar Wang
• [PATCH v9 0/5] Rockchip soc thermal driver   Caesar Wang
• [PATCH v9 1/5] thermal: rockchip: add driver for thermal   Caesar Wang
• [PATCH v9 2/5] dt-bindings: document Rockchip thermal   Caesar Wang
• [PATCH v9 3/5] ARM: dts: add RK3288 Thermal data   Caesar Wang
• [PATCH v9 4/5] ARM: dts: add main Thermal info to rk3288   Caesar Wang
• [PATCH v9 5/5] ARM: dts: enable Thermal on rk3288-evb board   Caesar Wang
• [PATCH v9 1/5] thermal: rockchip: add driver for thermal   Caesar Wang
• [PATCH v10 0/5] Rockchip soc thermal driver   Caesar Wang
• [PATCH v10 1/5] thermal: rockchip: add driver for thermal   Caesar Wang
• [PATCH v10 2/5] dt-bindings: document Rockchip thermal   Caesar Wang
• [PATCH v10 3/5] ARM: dts: add RK3288 Thermal data   Caesar Wang
• [PATCH v10 4/5] ARM: dts: add main Thermal info to rk3288   Caesar Wang
• [PATCH v10 5/5] ARM: dts: enable Thermal on rk3288-evb board   Caesar Wang
• [PATCH v10 1/5] thermal: rockchip: add driver for thermal   Caesar Wang
• [PATCH v11 0/5] Rockchip soc thermal driver   Caesar Wang
• [PATCH v11 1/5] thermal: rockchip: add driver for thermal   Caesar Wang
• [PATCH v11 2/5] dt-bindings: document Rockchip thermal   Caesar Wang
• [PATCH v11 3/5] ARM: dts: add RK3288 Thermal data   Caesar Wang
• [PATCH v11 4/5] ARM: dts: add main Thermal info to rk3288   Caesar Wang
• [PATCH v11 5/5] ARM: dts: enable Thermal on rk3288-evb board   Caesar Wang
• [PATCH v12 0/5] Rockchip soc thermal driver   Caesar Wang
• [PATCH v12 1/5] thermal: rockchip: add driver for thermal   Caesar Wang
• [PATCH v12 2/5] dt-bindings: document Rockchip thermal   Caesar Wang
• [PATCH v12 3/5] ARM: dts: add RK3288 Thermal data   Caesar Wang
• [PATCH v12 4/5] ARM: dts: add main Thermal info to rk3288   Caesar Wang
• [PATCH v12 5/5] ARM: dts: enable Thermal on rk3288-evb board   Caesar Wang
• [PATCH v13 0/5] Rockchip soc thermal driver   Caesar Wang
• [PATCH v13 1/5] thermal: rockchip: add driver for thermal   Caesar Wang
• [PATCH v13 2/5] dt-bindings: document Rockchip thermal   Caesar Wang
• [PATCH v13 3/5] ARM: dts: add RK3288 Thermal data   Caesar Wang
• [PATCH v13 4/5] ARM: dts: add main Thermal info to rk3288   Caesar Wang
• [PATCH v13 5/5] ARM: dts: enable Thermal on rk3288-evb board   Caesar Wang
• [PATCH v13 1/5] thermal: rockchip: add driver for thermal   Caesar Wang
• [PATCH v14 0/5] Rockchip soc thermal driver   Caesar Wang
• [PATCH v14 1/5] thermal: rockchip: add driver for thermal   Caesar Wang
• [PATCH v14 2/5] dt-bindings: document Rockchip thermal   Caesar Wang
• [PATCH v14 3/5] ARM: dts: add RK3288 Thermal data   Caesar Wang
• [PATCH v14 4/5] ARM: dts: add main Thermal info to rk3288   Caesar Wang
• [PATCH v14 5/5] ARM: dts: enable Thermal on rk3288-evb board   Caesar Wang
• [PATCH v14 2/5] dt-bindings: document Rockchip thermal   Caesar Wang
• [PATCH v14 1/5] thermal: rockchip: add driver for thermal   Caesar Wang
• [PATCH v15 0/5] Rockchip soc thermal driver   Caesar Wang
• [PATCH v15 1/5] thermal: rockchip: add driver for thermal   Caesar Wang
• [PATCH v15 2/5] dt-bindings: document Rockchip thermal   Caesar Wang
• [PATCH v15 3/5] ARM: dts: add RK3288 Thermal data   Caesar Wang
• [PATCH v15 4/5] ARM: dts: add main Thermal info to rk3288   Caesar Wang
• [PATCH v15 5/5] ARM: dts: enable Thermal on rk3288-evb board   Caesar Wang
• [PATCH v16 0/5] Rockchip soc thermal driver   Caesar Wang
• [PATCH v16 1/5] thermal: rockchip: add driver for thermal   Caesar Wang
• [PATCH v16 2/5] dt-bindings: document Rockchip thermal   Caesar Wang
• [PATCH v16 3/5] ARM: dts: add RK3288 Thermal data   Caesar Wang
• [PATCH v16 4/5] ARM: dts: add main Thermal info to rk3288   Caesar Wang
• [PATCH v16 5/5] ARM: dts: enable Thermal on rk3288-evb board   Caesar Wang
• [PATCH v15 1/5] thermal: rockchip: add driver for thermal   Caesar Wang
• [PATCH v15 2/5] dt-bindings: document Rockchip thermal   Caesar Wang
• [PATCH v16 2/5] dt-bindings: document Rockchip thermal   Caesar Wang
• [PATCH v17 0/5] Rockchip soc thermal driver   Caesar Wang
• [PATCH v17 1/5] thermal: rockchip: add driver for thermal   Caesar Wang
• [PATCH v17 2/5] dt-bindings: document Rockchip thermal   Caesar Wang
• [PATCH v17 3/5] ARM: dts: add RK3288 Thermal data   Caesar Wang
• [PATCH v17 4/5] ARM: dts: add main Thermal info to rk3288   Caesar Wang
• [PATCH v17 5/5] ARM: dts: enable Thermal on rk3288-evb board   Caesar Wang
• [PATCH] audio: sai: Add Power Management support   Huan Wang
• [PATCH] audio: sai: Add Power Management support   Huan Wang
• [PATCH resend] arm:extend the reserved memory for initrd to be page aligned   Wang, Yalin
• [PATCH RFC] arm/arm64:add CONFIG_HAVE_ARCH_BITREVERSE to support rbit   Wang, Yalin
• [RFC V2] arm/arm64:add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction   Wang, Yalin
• [RFC V3] arm/arm64:add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction   Wang, Yalin
• [PATCH] 6fire: Convert byte_rev_table uses to bitrev8   Wang, Yalin
• [RFC V3] arm/arm64:add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction   Wang, Yalin
• [PATCH] 6fire: Convert byte_rev_table uses to bitrev8   Wang, Yalin
• [RFC V2] arm/arm64:add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction   Wang, Yalin
• [RFC V4 1/3] add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction   Wang, Yalin
• [RFC V5 3/3] arm64:add bitrev.h file to support rbit instruction   Wang, Yalin
• [RFC] arm:remove clear_thread_flag(TIF_UPROBE)   Wang, Yalin
• [RFC V6 2/3] add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction   Wang, Yalin
• [RFC] arm:remove clear_thread_flag(TIF_UPROBE)   Wang, Yalin
• [PATCH v3 00/27] Use MSI chip framework to configure MSI/MSI-X in all platforms   Yijing Wang
• [PATCH v3 01/27] MSI: Remove the redundant irq_set_chip_data()   Yijing Wang
• [PATCH v3 02/27] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()   Yijing Wang
• [PATCH v3 03/27] s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq()   Yijing Wang
• [PATCH v3 04/27] arm/MSI: Save MSI chip in pci_sys_data   Yijing Wang
• [PATCH v3 05/27] PCI: tegra: Save msi chip in pci_sys_data   Yijing Wang
• [PATCH v3 06/27] PCI: designware: Save msi chip in pci_sys_data   Yijing Wang
• [PATCH v3 07/27] PCI: rcar: Save msi chip in pci_sys_data   Yijing Wang
• [PATCH v3 08/27] PCI: mvebu: Save msi chip in pci_sys_data   Yijing Wang
• [PATCH v3 09/27] arm/PCI: Clean unused pcibios_add_bus() and pcibios_remove_bus()   Yijing Wang
• [PATCH v3 10/27] PCI/MSI: Remove useless bus->msi assignment   Yijing Wang
• [PATCH v3 11/27] PCI/MSI: Refactor struct msi_chip to make it become more common   Yijing Wang
• [PATCH v3 12/27] x86/MSI: Use MSI chip framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH v3 13/27] x86/xen/MSI: Use MSI chip framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH v3 14/27] Irq_remapping/MSI: Use MSI chip framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH v3 15/27] x86/MSI: Remove unused MSI weak arch functions   Yijing Wang
• [PATCH v3 16/27] Mips/MSI: Save msi chip in pci sysdata   Yijing Wang
• [PATCH v3 17/27] MIPS/Octeon/MSI: Use MSI chip framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH v3 18/27] MIPS/Xlp: Remove the dead function destroy_irq() to fix build error   Yijing Wang
• [PATCH v3 19/27] MIPS/Xlp/MSI: Use MSI chip framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH v3 20/27] MIPS/Xlr/MSI: Use MSI chip framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH v3 21/27] Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH v3 22/27] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH v3 23/27] arm/iop13xx/MSI: Use MSI chip framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH v3 24/27] IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH v3 25/27] Sparc/MSI: Use MSI chip framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH v3 26/27] tile/MSI: Use MSI chip framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH v3 27/27] PCI/MSI: Clean up unused MSI arch functions   Yijing Wang
• [PATCH v3 22/27] s390/MSI: Use MSI chip framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH v3 21/27] Powerpc/MSI: Use MSI chip framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH v3 04/27] arm/MSI: Save MSI chip in pci_sys_data   Yijing Wang
• [PATCH v3 24/27] IA64/MSI: Use MSI chip framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH v3 02/27] x86/xen/MSI: Eliminate arch_msix_mask_irq() and arch_msi_mask_irq()   Yijing Wang
• [PATCH v3 05/27] PCI: tegra: Save msi chip in pci_sys_data   Yijing Wang
• [PATCH v3 04/27] arm/MSI: Save MSI chip in pci_sys_data   Yijing Wang
• [PATCH v3 09/27] arm/PCI: Clean unused pcibios_add_bus() and pcibios_remove_bus()   Yijing Wang
• [PATCH v3 10/27] PCI/MSI: Remove useless bus->msi assignment   Yijing Wang
• [PATCH v3 00/27] Use MSI chip framework to configure MSI/MSI-X in all platforms   Yijing Wang
• [PATCH v3 16/27] Mips/MSI: Save msi chip in pci sysdata   Yijing Wang
• [PATCH 00/10] Save MSI chip in pci_sys_data   Yijing Wang
• [PATCH 01/10] MSI: Rename msi_chip to msi_controller for better readability   Yijing Wang
• [PATCH 02/10] PCI/MSI: Introduce weak pcibios_msi_controller()   Yijing Wang
• [PATCH 03/10] arm/MSI: Save MSI controller in pci_sys_data   Yijing Wang
• [PATCH 04/10] PCI: tegra: Save MSI controller in pci_sys_data   Yijing Wang
• [PATCH 05/10] PCI: designware: Save MSI controller in pci_sys_data   Yijing Wang
• [PATCH 06/10] PCI: rcar: Save MSI controller in pci_sys_data   Yijing Wang
• [PATCH 07/10] PCI: mvebu: Save MSI controller in pci_sys_data   Yijing Wang
• [PATCH 08/10] PCI: xilinx: Save MSI controller in pci_sys_data   Yijing Wang
• [PATCH 09/10] arm/PCI: Clean unused pcibios_add_bus() and pcibios_remove_bus()   Yijing Wang
• [PATCH 10/10] PCI/MSI: Remove useless bus->msi assignment   Yijing Wang
• [PATCH 00/16] Use MSI controller framework to configure MSI/MSI-X   Yijing Wang
• [PATCH 01/16] PCI/MSI: Refactor MSI controller to make it become more common   Yijing Wang
• [PATCH 02/16] x86/MSI: Use MSI controller framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH 03/16] x86/xen/MSI: Use MSI controller framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH 04/16] Irq_remapping/MSI: Use MSI controller framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH 05/16] x86/MSI: Remove unused MSI weak arch functions   Yijing Wang
• [PATCH 06/16] Mips/MSI: Save MSI controller in pci sysdata   Yijing Wang
• [PATCH 07/16] MIPS/Octeon/MSI: Use MSI controller framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH 08/16] MIPS/Xlp/MSI: Use MSI controller framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH 09/16] MIPS/Xlr/MSI: Use MSI controller framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH 10/16] Powerpc/MSI: Use MSI controller framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH 11/16] s390/MSI: Use MSI controller framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH 12/16] arm/iop13xx/MSI: Use MSI controller framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH 13/16] IA64/MSI: Use MSI controller framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH 14/16] Sparc/MSI: Use MSI controller framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH 15/16] tile/MSI: Use MSI controller framework to configure MSI/MSI-X irq   Yijing Wang
• [PATCH 16/16] PCI/MSI: Clean up unused MSI arch functions   Yijing Wang
• [RFC PATCH 2/2] arm: pcibios: move to generic PCI domains   Yijing Wang
• [PATCH v1 0/2] ARM: hip04: add GPIO support   Zhou Wang
• [PATCH v1 1/2] ARM: hip04: set ARCH_NR_GPIO to 128   Zhou Wang
• [PATCH v1 2/2] ARM: dts: hip04: add GPIO pieces   Zhou Wang
• [PATCH] ARM: dts: hip04: NAND controller support   Zhou Wang
• [PATCH] ARM: dts: hip04: NAND controller support   Zhou Wang
• [PATCH] ARM: dts: hip04: NAND controller support   Zhou Wang
• [PATCH v1] mtd: hisilicon: add device tree node for NAND controller   Zhou Wang
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Stephen Warren
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   Stephen Warren
• [PATCH 1/2] MAINTAINERS: add Alex Courbot for Tegra   Stephen Warren
• [PATCH 2/2] MAINTAINERS: condense some Tegra related entries   Stephen Warren
• [PATCH 1/2] MAINTAINERS: add Alex Courbot for Tegra   Stephen Warren
• [PATCH V2 1/2] MAINTAINERS: add Alexandre Courbot for Tegra   Stephen Warren
• [PATCH V2 2/2] MAINTAINERS: condense some Tegra related entries   Stephen Warren
• [PATCH] serial: of-serial: fix up PM ops on no_console_suspend   Stephen Warren
• [PATCH v2 01/53] dmaengine: Make the destination abbreviation coherent   Stephen Warren
• [PATCH v2 10/53] dmaengine: bcm2835: Split device_control   Stephen Warren
• [PATCH v2 45/53] dmaengine: bcm2835: Declare slave capabilities for the generic code   Stephen Warren
• [PATCH] MAINTAINERS: corrected bcm2835 search   Stephen Warren
• [PATCH] bcm2835: add VideoCore Mailbox to the device tree   Stephen Warren
• [PATCH] mailbox: Enable BCM2835 mailbox support   Stephen Warren
• [PATCH] mailbox: Enable BCM2835 mailbox support   Stephen Warren
• [RFC] pinctrl: Provide a generic device tree binding for per-pin pin controllers   Stephen Warren
• [PATCHv4 0/3] pwm: imx: support output polarity inversion   Lothar Waßmann
• [PATCHv5 1/3] pwm: print error messages with pr_err() instead of pr_debug()   Lothar Waßmann
• [PATCHv5 2/3] pwm: make the PWM_POLARITY flag in DTB optional   Lothar Waßmann
• [PATCHv5 3/3] pwm: imx: support output polarity inversion   Lothar Waßmann
• [PATCHv6 0/3] pwm: imx: support output polarity inversion   Lothar Waßmann
• [PATCHv6 1/3] pwm: print error messages with pr_err() instead of pr_debug()   Lothar Waßmann
• [PATCHv6 2/3] pwm: make the PWM_POLARITY flag in DTB optional   Lothar Waßmann
• [PATCH 3/3] pwm: imx: support output polarity inversion   Lothar Waßmann
• [PATCH 2/3] pwm: push up dynamic printk level on errors in of_pwm_get()   Lothar Waßmann
• [PATCHv2 0/6] net: fec: fix regression on i.MX28 introduced by rx_copybreak support   Lothar Waßmann
• [PATCHv2 1/6] net: fec: indentation cleanup; no functional change   Lothar Waßmann
• [PATCHv2 2/6] net: fec: declare bufdesc_ex flag as bool   Lothar Waßmann
• [PATCHv2 3/6] net: fec: improve access to quirk flags by copying them into fec_enet_private struct   Lothar Waßmann
• [PATCHv2 4/6] net: fec: use swab32s() instead of cpu_to_be32()   Lothar Waßmann
• [PATCHv2 5/6] net: fec: simplify loop counter handling in swap_buffer()   Lothar Waßmann
• [PATCHv2 6/6] net: fec: fix regression on i.MX28 introduced by rx_copybreak support   Lothar Waßmann
• [PATCHv2 6/6] net: fec: fix regression on i.MX28 introduced by rx_copybreak support   Lothar Waßmann
• [PATCHv2 6/6] net: fec: fix regression on i.MX28 introduced by rx_copybreak support   Lothar Waßmann
• net: fec: fix regression on i.MX28 introduced by rx_copybreak support   Lothar Waßmann
• [PATCHv3 1/9] net: fec: indentation cleanup   Lothar Waßmann
• [PATCHv3 2/9] net: fec: consistently use lower case chars as hex digits   Lothar Waßmann
• [PATCHv3 3/9] net: fec: properly parenthesize macro args   Lothar Waßmann
• [PATCHv3 4/9] net: fec: declare bufdesc_ex flag as bool   Lothar Waßmann
• [PATCHv3 5/9] net: fec: improve access to quirk flags by copying them into fec_enet_private struct   Lothar Waßmann
• [PATCHv3 6/9] net: fec: use swab32s() instead of cpu_to_be32()   Lothar Waßmann
• [PATCHv3 7/9] net: fec: simplify loop counter handling in swap_buffer()   Lothar Waßmann
• [PATCHv3 8/9] net: fec: remove unused return value from swap_buffer()   Lothar Waßmann
• [PATCHv3 9/9] net: fec: fix regression on i.MX28 introduced by rx_copybreak support   Lothar Waßmann
• [PATCHv2 6/6] net: fec: fix regression on i.MX28 introduced by rx_copybreak support   Lothar Waßmann
• [PATCH RFC v2 1/8] pinctrl: Add driver for Zynq   Lothar Waßmann
• [PATCH RFC v2 1/8] pinctrl: Add driver for Zynq   Lothar Waßmann
• net: fec: fix regression on i.MX28 introduced by rx_copybreak support   Lothar Waßmann
• [PATCH RFC v2 1/8] pinctrl: Add driver for Zynq   Lothar Waßmann
• net: fec: fix regression on i.MX28 introduced by rx_copybreak support   Lothar Waßmann
• [PATCH v2 0/6] UIO driver for APM X-Gene QMTM   Richard Weinberger
• RCU bug with v3.17-rc3 ?   Johannes Weiner
• [PATCH] arm64: Fix compile error seen in non-SMP builds   Frederic Weisbecker
• [PATCH 2/2] ARM: perf: armv7: wrap unsupported arch init functions via micro   Chai Wen
• [PATCH 1/2] ARM: perf: armv7 remove useless return and check of idx in counter handling   Chai Wen
• [PATCH resend] ARM: perf: remove useless return and check of idx in counter handling   Chai Wen
• [PATCH resend] ARM: perf: remove useless return and check of idx in counter handling   Chai Wen
• [PATCH resend] ARM: perf: remove useless return and check of idx in counter handling   Chai Wen
• [PATCH] ARM: shmobile: koelsch: Fix flash partition label and size in device tree   Chai Wen
• next build: 304 warnings 0 failures (next/next-20141013)   Mika Westerberg
• next build: 304 warnings 0 failures (next/next-20141013)   Mika Westerberg
• [PATCH] leds: leds-gpio: Convert gpio_blink_set() to use GPIO descriptors   Mika Westerberg
• [PATCH v4 6/7] xen/arm/arm64: introduce xen_arch_need_swiotlb   Konrad Rzeszutek Wilk
• [PATCH v4 6/7] xen/arm/arm64: introduce xen_arch_need_swiotlb   Konrad Rzeszutek Wilk
• [PATCH] vfio/pci: make MSI handling optional   Alex Williamson
• [PATCH 1/3] qe-uart: modify qe-uart to adapt both powerpc and arm   Scott Wood
• [PATCH 3/3] ls1021a-twr/qe: add qe node to ls1-twr   Scott Wood
• [PATCH 1/3] qe-uart: modify qe-uart to adapt both powerpc and arm   Scott Wood
• [PATCHv5] clk: ppc-corenet: rename to qoriq and add CLK_OF_DECLARE support   Scott Wood
• [PATCH v2 08/47] kernel: Move pm_power_off to common code   Lennox Wu
• [PATCH v2 2/4] ARM: exynos: Ensure PM domains are powered at initialization   Rafael J. Wysocki
• [PATCH 03/44] hibernate: Call have_kernel_poweroff instead of checking pm_power_off   Rafael J. Wysocki
• [PATCH 44/44] kernel: Remove pm_power_off   Rafael J. Wysocki
• [PATCH v5 12/18] ACPI / processor: Make it possible to get CPU hardware ID via GICC   Rafael J. Wysocki
• [PATCH] PM / Domains: Change prototype for the ->attach_dev() callback   Rafael J. Wysocki
• [PATCH 3/3] ACPI / processor: Rename acpi_(un)map_lsapic() to acpi_(un)map_cpu()   Rafael J. Wysocki
• [PATCH 3/3] ACPI / processor: Rename acpi_(un)map_lsapic() to acpi_(un)map_cpu()   Rafael J. Wysocki
• [PATCH v3 0/9] PM / Domains: Fix race conditions during boot   Rafael J. Wysocki
• [PATCH v3 4/9] drivercore / platform: Keep PM domain powered during ->probe()   Rafael J. Wysocki
• pm_runtime_enable() in ->probe() (was: Re: [PATCH v3 0/9] PM / Domains: Fix race conditions during boot)   Rafael J. Wysocki
• pm_runtime_enable() in ->probe() (was: Re: [PATCH v3 0/9] PM / Domains: Fix race conditions during boot)   Rafael J. Wysocki
• [PATCH V2 00/13] clk: mmp: clock device tree support   Chao Xie
• [PATCH V2 01/13] clk: mmp: add prefix "mmp" for structures defined for clk-frac   Chao Xie
• [PATCH V2 02/13] clk: mmp: add spin lock for clk-frac   Chao Xie
• [PATCH V2 03/13] clk: mmp: add init callback for clk-frac   Chao Xie
• [PATCH V2 04/13] clk: mmp: move definiton of mmp_clk_frac to clk.h   Chao Xie
• [PATCH V2 05/13] clk: mmp: add clock type mix   Chao Xie
• [PATCH V2 06/13] clk: mmp: add mmp private gate clock   Chao Xie
• [PATCH V2 07/13] clk: mmp: add basic support functions for DT support   Chao Xie
• [PATCH V2 08/13] clk: mmp: add reset support   Chao Xie
• [PATCH V2 09/13] clk: mmp: add pxa168 DT support for clock driver   Chao Xie
• [PATCH V2 10/13] clk: mmp: add pxa910 DT support for clock driver   Chao Xie
• [PATCH V2 11/13] clk: mmp: add mmp2 DT support for clock driver   Chao Xie
• [PATCH V2 12/13] arm: mmp: Make all the dts file to be compiled by Makefile   Chao Xie
• [PATCH V2 13/13] arm: mmp: Make use of the DT supported clock   Chao Xie
• [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator   Herbert Xu
• [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator   Herbert Xu
• [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator   Herbert Xu
• [PATCH 0/2] init some clock rate from dts for rk3288   Kever Yang
• [PATCH 1/2] clk: rockchip: add 400MHz and 500MHz for rk3288 clock rate   Kever Yang
• [PATCH 2/2] ARM: dts: enable init rate for clock   Kever Yang
• [PATCH v2 0/2] init some clock rate from dts for rk3288   Kever Yang
• [PATCH v2 1/2] clk: rockchip: add 400MHz and 500MHz for rk3288 clock rate   Kever Yang
• [PATCH v2 2/2] ARM: dts: enable init rate for clock   Kever Yang
• [PATCH] clk: rockchip: change PLL setting for better clock jitter   Kever Yang
• [PATCH v3 0/6] add basic rk3288 smp support   Kever Yang
• [PATCH v3 1/6] ARM: rockchip: convert to regmap and use pmu syscon if available   Kever Yang
• [PATCH v3 2/6] ARM: dts: rockchip: use the same pmu node name as before   Kever Yang
• [PATCH v3 3/6] ARM: rockchip: add option to access the pmu via a phandle in smp_operations   Kever Yang
• [PATCH v3 4/6] ARM: dts: rockchip: add pmu references to cpus nodes   Kever Yang
• [PATCH v3 5/6] ARM: rockchip: add basic smp support for rk3288   Kever Yang
• [PATCH v3 6/6] ARM: dts: rockchip: add intmem node for rk3288 smp support   Kever Yang
• [PATCH 0/2] Fix up rk3288 smp cpu hotplug   Kever Yang
• [PATCH 1/2] ARM: rockchip: fix up rk3288 smp cpu hotplug   Kever Yang
• [PATCH 2/2] ARM: dts: rockchip: add reset for CPU nodes   Kever Yang
• [PATCH v4 0/6] add basic rk3288 smp support   Kever Yang
• [PATCH v4 1/6] ARM: rockchip: convert to regmap and use pmu syscon if available   Kever Yang
• [PATCH v4 2/6] ARM: rockchip: add option to access the pmu via a phandle in smp_operations   Kever Yang
• [PATCH v4 3/6] ARM: dts: rockchip: add pmu references to cpus nodes   Kever Yang
• [PATCH v4 4/6] ARM: rockchip: add basic smp support for rk3288   Kever Yang
• [PATCH v4 5/6] ARM: dts: rockchip: add intmem node for rk3288 smp support   Kever Yang
• [PATCH v4 6/6] ARM: dts: rockchip: add reset for CPU nodes   Kever Yang
• [PATCH v4 4/6] ARM: rockchip: add basic smp support for rk3288   Kever Yang
• [PATCH v4 4/6] ARM: rockchip: add basic smp support for rk3288   Kever Yang
• [PATCH v5 0/6] add basic rk3288 smp support   Kever Yang
• [PATCH v5 1/6] ARM: rockchip: convert to regmap and use pmu syscon if available   Kever Yang
• [PATCH v5 2/6] ARM: rockchip: add option to access the pmu via a phandle in smp_operations   Kever Yang
• [PATCH v5 3/6] ARM: dts: rockchip: add pmu references to cpus nodes   Kever Yang
• [PATCH v5 4/6] ARM: rockchip: add basic smp support for rk3288   Kever Yang
• [PATCH v5 5/6] ARM: dts: rockchip: add intmem node for rk3288 smp support   Kever Yang
• [PATCH v5 6/6] ARM: dts: rockchip: add reset for CPU nodes   Kever Yang
• [PATCH] clk: rockchip: add npll to source of sclk_gpu   Kever Yang
• [PATCH] clk: rockchip: disable unused clocks   Kever Yang
• [PATCH] clk: rockchip: disable unused clocks   Kever Yang
• [PATCH v2] clk: rockchip: disable unused clocks   Kever Yang
• [PATCH v3] clk: rockchip: disable unused clocks   Kever Yang
• [PATCH] clk: rockchip: change hierarchy for some clocks   Kever Yang
• [PATCH 1/4] mm: cma: Don't crash on allocation if CMA area can't be activated   Weijie Yang
• [PATCH] spi/atmel: add support for runtime PM   Wenyou Yang
• [PATCH] spi/atmel: add support for runtime PM   Yang, Wenyou
• [PATCH v2] spi/atmel: add support for runtime PM   Wenyou Yang
• [PATCH] spi/atmel: add support for runtime PM   Yang, Wenyou
• [PATCH] spi/atmel: add support for runtime PM   Yang, Wenyou
• [PATCH 0/3] i2c/at91: add support PM functions   Wenyou Yang
• [PATCH 1/3] i2c/at91: add support for runtime PM   Wenyou Yang
• [PATCH 2/3] i2c/at91: add support for system PM   Wenyou Yang
• [PATCH 3/3] i2c/at91: adopt pinctrl support   Wenyou Yang
• [PATCH] spi/atmel: add support for runtime PM   Yang, Wenyou
• [PATCH 1/3] i2c/at91: add support for runtime PM   Yang, Wenyou
• [PATCH 2/3] i2c/at91: add support for system PM   Yang, Wenyou
• [PATCH v2 0/3] i2c/at91: add support PM functions   Wenyou Yang
• [PATCH v2 1/3] i2c/at91: add support for runtime PM   Wenyou Yang
• [PATCH v2 2/3] i2c/at91: add support for system PM   Wenyou Yang
• [PATCH v2 3/3] i2c/at91: adopt pinctrl support   Wenyou Yang
• [PATCH] spi/atmel: improve the system suspend/resume functions implementation   Wenyou Yang
• [PATCH v3 0/3] i2c/at91: add support PM functions   Wenyou Yang
• [PATCH v3 1/3] i2c/at91: add support for runtime PM   Wenyou Yang
• [PATCH v3 2/3] i2c/at91: add support for system PM   Wenyou Yang
• [PATCH v3 3/3] i2c/at91: adopt pinctrl support   Wenyou Yang
• [PATCH v3 2/3] i2c/at91: add support for system PM   Yang, Wenyou
• [PATCH] mmc: atmel-mci: add pm runtime support   Wenyou Yang
• [PATCH] mmc: atmel-mci: add pm runtime support   Yang, Wenyou
• [PATCH v2] mmc: atmel-mci: add runtime pm support   Wenyou Yang
• [PATCH v9 0/3] i2c: imx: add DMA support for freescale i2c driver   Yuan Yao
• [PATCH v9 1/3] i2c: imx: Sort include headers alphabetically   Yuan Yao
• [PATCH v9 2/3] Documentation:add DMA support for freescale i2c driver   Yuan Yao
• [PATCH v9 3/3] i2c: imx: add DMA support for freescale i2c driver   Yuan Yao
• [PATCH 0/7] arm64 kexec kernel patches V3   Dave Young
• [PATCH 0/7] arm64 kexec kernel patches V3   Dave Young
• [RFC PATCH] arm64/efi: use stable virtual mappings for UEFI runtime services   Dave Young
• [RFC PATCH] arm64/efi: use stable virtual mappings for UEFI runtime services   Dave Young
• [PATCH 4/6] arm64/efi: move SetVirtualAddressMap() to UEFI stub   Dave Young
• [PATCH 4/6] arm64/efi: move SetVirtualAddressMap() to UEFI stub   Dave Young
• [PATCH 00/10] arm64 kexec kernel patches V5   Dave Young
• [PATCH v8 1/2] i2c: imx: add DMA support for freescale i2c driver   Yao Yuan
• [PATCH] imx: thermal: imx_get_temp might be called before the sensor clock ist prepared   Philipp Zabel
• [PATCH v2 1/3] ARM: meson: reset: Add reset controller for MesonX SoCs   Philipp Zabel
• [PATCH v2 2/3] ARM: meson: DTSI: Enable reset controller   Philipp Zabel
• [PATCH v3 1/3] ARM: meson: reset: Add reset controller for MesonX SoCs   Philipp Zabel
• [PATCH 3/3] ARM: dts: mt8135: Add Reset Controller for MediaTek SoC   Philipp Zabel
• [PATCH 1/3] ARM: mediatek: Add Reset Controller for MediaTek SoC   Philipp Zabel
• [PATCH 0/3] pwm: support backward compatibility of DTB extending PWM args   Vladimir Zapolskiy
• [PATCH 1/3] pwm: process pwm polarity argument in of_pwm_simple_xlate()   Vladimir Zapolskiy
• [PATCH 2/3] pwm: push up dynamic printk level on errors in of_pwm_get()   Vladimir Zapolskiy
• [PATCH 3/3] pwm: set the actual number of pwms arguments defined in board dts   Vladimir Zapolskiy
• [PATCHv2 2/3] pwm: push up dynamic printk level on errors in of_pwm_get()   Vladimir Zapolskiy
• [PATCHv2 0/3] pwm: support backward compatibility of DTB extending PWM args   Vladimir Zapolskiy
• [PATCH 1/3] pwm: process pwm polarity argument in of_pwm_simple_xlate()   Vladimir Zapolskiy
• [PATCHv2 2/3] pwm: push up dynamic printk level on errors in of_pwm_get()   Vladimir Zapolskiy
• [PATCHv2 3/3] pwm: set the actual number of pwms arguments defined in board dts   Vladimir Zapolskiy
• [PATCH] ARM: i.MX6: Fix "emi" clock name typo   Vladimir Zapolskiy
• [PATCH v10 1/5] thermal: rockchip: add driver for thermal   Vladimir Zapolskiy
• [PATCH v11 1/5] thermal: rockchip: add driver for thermal   Vladimir Zapolskiy
• [PATCHv8 1/2] pwm: Add Allwinner SoC support   Vladimir Zapolskiy
• [PATCHv8 1/2] pwm: Add Allwinner SoC support   Vladimir Zapolskiy
• [PATCHv8 1/2] pwm: Add Allwinner SoC support   Vladimir Zapolskiy
• [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator   Vladimir Zapolskiy
• [PATCH v5 4/4] crypto: Add Allwinner Security System crypto accelerator   Vladimir Zapolskiy
• [PATCH v5 02/16] clk: tegra: Add library for the DFLL clock source (open-loop mode)   Vladimir Zapolskiy
• [PATCH v5 03/16] clk: tegra: Add closed loop support for the DFLL   Vladimir Zapolskiy
• [PATCH] ARM: dts: imx6dl: add alias for I2C4 bus   Vladimir Zapolskiy
• [PATCH 1/6] Documentation: DT: Add bindings for Spreadtrum serial   Orson Zhai
• [PATCH v2 5/5] tty/serial: Add earlycon support for Spreadtrum serial driver   Orson Zhai
• [PATCH v2 5/5] tty/serial: Add earlycon support for Spreadtrum serial driver   Orson Zhai
• [PATCH v2 0/5] Add Spreadtrum Sharkl Platform support   Chunyan Zhang
• [PATCH v2 1/5] Documentation: DT: Renamed of-serial.txt to 8250.txt   Chunyan Zhang
• [PATCH v2 2/5] Documentation: DT: Add bindings for Spreadtrum Sharkl Platform   Chunyan Zhang
• [PATCH v2 3/5] arm64: dts: Add support for Spreadtrum Sharkl3 SoC in dts and Makefile.   Chunyan Zhang
• [PATCH v2 4/5] arm64: Add support for Spreadtrum's Sharkl Platform in Kconfig and defconfig   Chunyan Zhang
• [PATCH v2 5/5] tty/serial: Add earlycon support for Spreadtrum serial driver   Chunyan Zhang
• [PATCH 3/3] irqchip: dw-apb-ictl: add PM support   Jisheng Zhang
• [PATCH 3/3] irqchip: dw-apb-ictl: add PM support   Jisheng Zhang
• [PATCH 3/3] irqchip: dw-apb-ictl: add PM support   Jisheng Zhang
• [PATCH] irqchip: dw-apb-ictl: select GENERIC_IRQ_CHIP   Jisheng Zhang
• [PATCH v2] irqchip: dw-apb-ictl: select GENERIC_IRQ_CHIP   Jisheng Zhang
• [PATCH] irqchip: dw-apb-ictl: select GENERIC_IRQ_CHIP   Jisheng Zhang
• [PATCH 2/6] arm64: Add DTS support for Spreadtrum's Shark64 SoC   Lyra Zhang
• [PATCH v2 5/5] tty/serial: Add earlycon support for Spreadtrum serial driver   Lyra Zhang
• [PATCH v2 5/5] tty/serial: Add earlycon support for Spreadtrum serial driver   Lyra Zhang
• [PATCH 2/6] arm64: Add DTS support for Spreadtrum's Shark64 SoC   Lyra Zhang
• [PATCH v4] ARM: perf: save/restore pmu registers in pm notifier   Neil Zhang
• [PATCH v4] ARM: perf: save/restore pmu registers in pm notifier   Neil Zhang
• [PATCH] arm64: ARCH_PFN_OFFSET should be unsigned long   Neil Zhang
• [PATCH] arm64: mm: use macro instead of if judgement of ZONE_DMA   Yifan Zhang
• [PATCH v2] arm64: mm: use macro instead of if judgement of ZONE_DMA   Yifan Zhang
• [PATCH v2] arm64: mm: use macro instead of if judgement of ZONE_DMA   Yifan Zhang
• [PATCH] arm64: mm: use macro instead of if judgement of ZONE_DMA   Yifan Zhang
• [PATCH v2] arm64: mm: use macro instead of if judgement of ZONE_DMA   Yifan Zhang
• [PATCH v2 1/2] pm: add FSM configuration for deep sleep   Chenhui Zhao
• [PATCH v2 2/2] arm: pm: add deep sleep support for LS1   Chenhui Zhao
• [PATCH 1/4] pinctrl: rockchip: Set wake_enabled   Chris Zhong
• [PATCH 2/4] pinctrl: rockchip: Don't call pinctrl_gpio_direction_output() in pin_config_set()   Chris Zhong
• [PATCH 3/4] pinctrl: rockchip: Parse pin groups before calling pinctrl_register()   Chris Zhong
• [PATCH v4 0/6] this is the 1st version of suspend. RK3288 can shut down the cpu, gpu and   Chris Zhong
• [PATCH v4 1/6] pinctrl: rockchip: add suspend/resume functions   Chris Zhong
• [PATCH v4 2/6] pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume   Chris Zhong
• [PATCH v4 3/6] clk: rockchip: RK3288: add suspend and resume   Chris Zhong
• [PATCH v4 4/6] ARM: rockchip: add suspend and resume for RK3288   Chris Zhong
• [PATCH v4 5/6] ARM: rockchip: Add pmu-sram binding   Chris Zhong
• [PATCH v4 6/6] ARM: dts: add RK3288 suspend support   Chris Zhong
• [PATCH v6 0/7] This is the 1st version of suspend for RK3288.   Chris Zhong
• [PATCH v6 1/7] pinctrl: rockchip: add suspend/resume functions   Chris Zhong
• [PATCH v6 2/7] pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume   Chris Zhong
• [PATCH v6 3/7] clk: rockchip: RK3288: add suspend and resume   Chris Zhong
• [PATCH v6 4/7] ARM: rockchip: add suspend and resume for RK3288   Chris Zhong
• [PATCH v6 6/7] ARM: dts: add RK3288 suspend support   Chris Zhong
• [PATCH v6 7/7] ARM: dts: add suspend voltage setting for RK808   Chris Zhong
• [PATCH] gpio: pl061: hook request if gpio-ranges avaiable   Haojian Zhuang
• [PATCH] gpio: pl061: hook request if gpio-ranges avaiable   Haojian Zhuang
• [PATCH] gpio: pl061: hook request if gpio-ranges avaiable   Haojian Zhuang
• [PATCH] ARM: dts: hip04: NAND controller support   Haojian Zhuang
• [PATCH v1 0/2] ARM: hip04: add GPIO support   Haojian Zhuang
• [PATCH v6 3/6] sched: add utilization_avg_contrib   Peter Zijlstra
• [PATCH v6 3/6] sched: add utilization_avg_contrib   Peter Zijlstra
• [PATCH v6 3/6] sched: add utilization_avg_contrib   Peter Zijlstra
• [PATCH v6 5/6] sched: replace capacity_factor by usage   Peter Zijlstra
• [PATCH v7 2/7] sched: move cfs task on a CPU with higher capacity   Peter Zijlstra
• [PATCH v7 5/7] sched: get CPU's usage statistic   Peter Zijlstra
• [PATCH v7 6/7] sched: replace capacity_factor by usage   Peter Zijlstra
• [PATCH v7 6/7] sched: replace capacity_factor by usage   Peter Zijlstra
• [PATCH v7 6/7] sched: replace capacity_factor by usage   Peter Zijlstra
• [PATCH v7 5/7] sched: get CPU's usage statistic   Peter Zijlstra
• [PATCH v7 6/7] sched: replace capacity_factor by usage   Peter Zijlstra
• [PATCH v7 2/7] sched: move cfs task on a CPU with higher capacity   Peter Zijlstra
• [PATCH v3 0/3] ASoC/ARM: tegra: apalis/colibri t30: sgtl5000 audio   Marcel Ziswiler
• [PATCH v3 1/3] ASoC: tegra: add tegra sgtl5000 machine driver   Marcel Ziswiler
• [PATCH v3 2/3] ARM: tegra: apalis/colibri t30: integrate audio support   Marcel Ziswiler
• [PATCH v3 3/3] ARM: tegra: enable sgtl5000 audio   Marcel Ziswiler
• [PATCH V2 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators   Bartlomiej Zolnierkiewicz
• [PATCH V2 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators   Bartlomiej Zolnierkiewicz
• [PATCH V2 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators   Bartlomiej Zolnierkiewicz
• [PATCH V2 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators   Bartlomiej Zolnierkiewicz
• [GIT PULL 3/3] 3rd Round of Exynos-PM-2 Updates for v3.18   Bartlomiej Zolnierkiewicz
• [GIT PULL 3/3] 3rd Round of Exynos-PM-2 Updates for v3.18   Bartlomiej Zolnierkiewicz
• [PATCH V2 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators   Bartlomiej Zolnierkiewicz
• [PATCH] ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board   Bartlomiej Zolnierkiewicz
• [PATCH] ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board   Bartlomiej Zolnierkiewicz
• [PATCH] ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board   Bartlomiej Zolnierkiewicz
• [PATCH v3] ARM: EXYNOS: add Exynos3250 PMU support   Bartlomiej Zolnierkiewicz
• [GIT PULL 3/3] 3rd Round of Exynos-PM-2 Updates for v3.18   Bartlomiej Zolnierkiewicz
• [GIT PULL 2/3] 1st Round of Samsung PM updates for v3.19   Bartlomiej Zolnierkiewicz
• [PATCH v2 1/3] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Marc Zyngier
• [PATCH v2 1/3] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Marc Zyngier
• [PATCH v2 1/3] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Marc Zyngier
• [PATCH v2 1/3] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Marc Zyngier
• [PATCH 1/6] arm/arm64: KVM: use __GFP_ZERO not memset() to get zeroed pages   Marc Zyngier
• [PATCH 2/6] arm/arm64: KVM: fix potential NULL dereference in user_mem_abort()   Marc Zyngier
• [PATCH 3/6] arm/arm64: KVM: add 'writable' parameter to kvm_phys_addr_ioremap   Marc Zyngier
• [PATCH 4/6] ARM: kvm: define PAGE_S2_DEVICE as read-only by default   Marc Zyngier
• [PATCH 5/6] arm64: kvm: define PAGE_S2_DEVICE as read-only by default   Marc Zyngier
• [PATCH 2/6] arm/arm64: KVM: fix potential NULL dereference in user_mem_abort()   Marc Zyngier
• [PATCH 3/6] arm/arm64: KVM: add 'writable' parameter to kvm_phys_addr_ioremap   Marc Zyngier
• [PATCH v3 3/7] irqchip: gic: Support hierarchy irq domain.   Marc Zyngier
• [PATCH v3 1/3] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Marc Zyngier
• [PATCH v3 2/3] arm/arm64: KVM: Ensure memslots are within KVM_PHYS_SIZE   Marc Zyngier
• [PATCH v4] arm/arm64: KVM: map MMIO regions at creation time   Marc Zyngier
• [PATCH v3 3/7] irqchip: gic: Support hierarchy irq domain.   Marc Zyngier
• [PATCH v3 3/7] irqchip: gic: Support hierarchy irq domain.   Marc Zyngier
• [PATCH v3 3/7] irqchip: gic: Support hierarchy irq domain.   Marc Zyngier
• [PATCH v3 3/7] irqchip: gic: Support hierarchy irq domain.   Marc Zyngier
• [PATCH v3 1/7] irqdomain: Fix irq_domain_alloc_irqs return check.   Marc Zyngier
• [RFC PATCH] arm/arm64: KVM: Fix BE accesses to GICv2 EISR and ELRSR regs   Marc Zyngier
• [PATCH] ARM/ARM64: arch-timer: fix arch_timer_probed logic   Marc Zyngier
• [GIT PULL] Second pull request for KVM on arm/arm64 for 3.18   Marc Zyngier
• [PATCH 01/12] arm: kvm: fix CPU hotplug   Marc Zyngier
• [PATCH 02/12] ARM: KVM: fix vgic-disabled build   Marc Zyngier
• [PATCH 03/12] arm/arm64: KVM: use __GFP_ZERO not memset() to get zeroed pages   Marc Zyngier
• [PATCH 04/12] arm/arm64: KVM: fix potential NULL dereference in user_mem_abort()   Marc Zyngier
• [PATCH 05/12] arm/arm64: KVM: add 'writable' parameter to kvm_phys_addr_ioremap   Marc Zyngier
• [PATCH 06/12] ARM: kvm: define PAGE_S2_DEVICE as read-only by default   Marc Zyngier
• [PATCH 07/12] arm64: kvm: define PAGE_S2_DEVICE as read-only by default   Marc Zyngier
• [PATCH 08/12] arm/arm64: KVM: map MMIO regions at creation time   Marc Zyngier
• [PATCH 09/12] arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2   Marc Zyngier
• [PATCH 10/12] arm/arm64: KVM: Ensure memslots are within KVM_PHYS_SIZE   Marc Zyngier
• [PATCH 11/12] arm: kvm: STRICT_MM_TYPECHECKS fix for user_mem_abort   Marc Zyngier
• [PATCH 12/12] arm/arm64: KVM: Fix BE accesses to GICv2 EISR and ELRSR regs   Marc Zyngier
• [PATCH] irqchip: hip04: Convert to handle_domain_irq   Marc Zyngier
• [PATCH] genirq: Introduce irq_read_line()   Marc Zyngier
• [PATCH] genirq: Introduce irq_read_line()   Marc Zyngier
• [PATCH] genirq: Introduce irq_read_line()   Marc Zyngier
• [PATCH 0/3] genirq: Saving/restoring the irqchip state of an irq line   Marc Zyngier
• [PATCH 1/3] genirq: Allow the irqchip state of an IRQ to be save/restored   Marc Zyngier
• [PATCH 2/3] irqchip: GIC: Add support for irq_{get, set}_irqchip_state   Marc Zyngier
• [PATCH 3/3] irqchip: GICv3: Add support for irq_{get, set}_irqchip_state   Marc Zyngier
• [PATCH 0/3] genirq: Add support for "split-EOI" irqchips   Marc Zyngier
• [PATCH 1/3] genirq: Add support for priority-drop/deactivate interrupt controllers   Marc Zyngier
• [PATCH 2/3] irqchip: GIC: Convert to EOImode == 1   Marc Zyngier
• [PATCH 3/3] irqchip: GICv3: Convert to EOImode == 1   Marc Zyngier
• [PATCH] ARM/ARM64: arch-timer: fix arch_timer_probed logic   Marc Zyngier
• [PATCH 1/3] genirq: Allow the irqchip state of an IRQ to be save/restored   Marc Zyngier
• [PATCH 1/3] genirq: Add support for priority-drop/deactivate interrupt controllers   Marc Zyngier
• [PATCHv4 2/7] arm64: Switch to ldr for loading the stub vectors   Marc Zyngier
• [PATCH] genirq: Introduce irq_read_line()   Marc Zyngier
• [PATCH 1/3] genirq: Add support for priority-drop/deactivate interrupt controllers   Marc Zyngier
• [Patch Part2 v3 01/24] irqdomain: Introduce new interfaces to support hierarchy irqdomains   Marc Zyngier
• [Patch Part2 v3 01/24] irqdomain: Introduce new interfaces to support hierarchy irqdomains   Marc Zyngier
• [PATCH 1/3] genirq: Add support for priority-drop/deactivate interrupt controllers   Marc Zyngier
• [PATCH 2/3] irqchip: GIC: Add support for irq_{get, set}_irqchip_state   Marc Zyngier
• [PATCH] arm64: KVM: fix unmapping with 48-bit VAs   Marc Zyngier
• [PATCH 1/3] genirq: Allow the irqchip state of an IRQ to be save/restored   Marc Zyngier
• [PATCH] arm64: KVM: fix unmapping with 48-bit VAs   Marc Zyngier
• [PATCH] arm64: KVM: fix unmapping with 48-bit VAs   Marc Zyngier
• [PATCH 1/3] genirq: Add support for priority-drop/deactivate interrupt controllers   Marc Zyngier
• [PATCH] arm64: amd-seattle: Adding device tree for AMD Seattle platform   suravee.suthikulpanit at amd.com
• [PATCH V2] arm64: amd-seattle: Adding device tree for AMD Seattle platform   suravee.suthikulpanit at amd.com
• [PATCH V3] arm64: amd-seattle: Adding device tree for AMD Seattle platform   suravee.suthikulpanit at amd.com
• [V9 PATCH 0/2] irqchip: gic: Introduce ARM GICv2m MSI(-X) support   suravee.suthikulpanit at amd.com
• [V9 PATCH 1/2] genirq: Add irq_chip_set_type_parent function   suravee.suthikulpanit at amd.com
• [V9 PATCH 2/2] irqchip: gicv2m: Add supports for ARM GICv2m MSI(-X)   suravee.suthikulpanit at amd.com
• [PATCH 1/2] socfpga: hotplug: put cpu1 in wfi   atull
• [PATCH 2/2] socfpga: support suspend to ram   atull
• [PATCH 1/2] socfpga: hotplug: put cpu1 in wfi   atull
• [PATCH v2 2/2] socfpga: support suspend to ram   atull
• [PATCH v2 2/2] socfpga: support suspend to ram   atull
• [PATCH v2 1/2] socfpga: hotplug: put cpu1 in wfi   atull
• [PATCH v3 2/2] socfpga: support suspend to ram   atull
• [PATCH 1/2] ARM: socfpga: Add driver for the L3 interconnect   atull
• [PATCH 0/3] ARM: mediatek: Add driver for Mediatek I2C controller   xudong chen
• [PATCH 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.   xudong chen
• [PATCH 3/3] I2C: mediatek: Add driver for MediaTek I2C controller   xudong chen
• [PATCH] PCI: imx6q-pcie doc: Update the clocks descriptions to use defines   Hong-Xing.Zhu at freescale.com
• [PATCH v3] ARM: ls1021a: add gating clocks to IP blocks.   Li.Xiubo at freescale.com
• [PATCH v4] ARM: ls1021a: add gating clocks to IP blocks.   Li.Xiubo at freescale.com
• [PATCH] audio: sai: Add Power Management support   Li.Xiubo at freescale.com
• 答复: [PATCH v6] PCI: Layerscape: Add Layerscape PCIe driver   Minghuan.Lian at freescale.com
• [PATCH V4 0/6] ARM64: Add support for FSL's LS2085A SoC   bhupesh.sharma at freescale.com
• [PATCH v2 1/1] ARM: dts: imx6x: Add enet2 support for imx6sx-sdb board   fugang.duan at freescale.com
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH 4/4] simplefb: add clock handling code   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   jonsmirl at gmail.com
• [linux-sunxi] Re: [PATCH v3] dt-bindings: Add a clocks property to the simple-framebuffer binding   jonsmirl at gmail.com
• Fixing boot-time hiccups in your display   jonsmirl at gmail.com
• Fixing boot-time hiccups in your display   jonsmirl at gmail.com
• [linux-sunxi] Re: Fixing boot-time hiccups in your display   jonsmirl at gmail.com
• Fixing boot-time hiccups in your display   jonsmirl at gmail.com
• [PATCH] ARM: Add unwinding support for memset function   linyongting at gmail.com
• [PATCH 4/7] sched: Track group sched_entity usage contributions   bsegall at google.com
• [PATCH v5 1/3] power-domain: add power domain drivers for Rockchip platform   Hong jinkun
• [PATCH v4 1/3] power-domain: add power domain drivers for Rockchip platform   Hong jinkun
• [PATCH v7 1/3] power-domain: add power domain drivers for Rockchip platform   Hong jinkun
• [PATCH v5 1/3] power-domain: add power domain drivers for Rockchip platform   Hong jinkun
• [PATCH v3 0/3] ARM: rk3288 : Add PM Domain support   jinkun.hong
• [PATCH v3 1/3] power-domain: add power domain drivers for Rockchip platform   jinkun.hong
• [PATCH v3 2/3] dt-bindings: add document of Rockchip power domain   jinkun.hong
• [PATCH v3 3/3] ARM: dts: add rk3288 power-domain node   jinkun.hong
• [PATCH v4 0/3] ARM: rk3288 : Add PM Domain support   jinkun.hong
• [PATCH v4 1/3] power-domain: add power domain drivers for Rockchip platform   jinkun.hong
• [PATCH v4 2/3] dt-bindings: add document of Rockchip power domain   jinkun.hong
• [PATCH v4 3/3] ARM: dts: add rk3288 power-domain node   jinkun.hong
• [PATCH v5 0/3] ARM: rk3288 : Add PM Domain support   jinkun.hong
• [PATCH v5 1/3] power-domain: add power domain drivers for Rockchip platform   jinkun.hong
• [PATCH v5 2/3] dt-bindings: add document of Rockchip power domain   jinkun.hong
• [PATCH v5 3/3] ARM: dts: add rk3288 power-domain node   jinkun.hong
• [PATCH v6 0/3] ARM: rk3288 : Add PM Domain support   jinkun.hong
• [PATCH v6 1/3] power-domain: add power domain drivers for Rockchip platform   jinkun.hong
• [PATCH v6 2/3] dt-bindings: add document of Rockchip power domain   jinkun.hong
• [PATCH v6 3/3] ARM: dts: add rk3288 power-domain node   jinkun.hong
• [PATCH v7 0/3] ARM: rk3288 : Add PM Domain support   jinkun.hong
• [PATCH v7 1/3] power-domain: add power domain drivers for Rockchip platform   jinkun.hong
• [PATCH v7 2/3] dt-bindings: add document of Rockchip power domain   jinkun.hong
• [PATCH v7 3/3] ARM: dts: add rk3288 power-domain node   jinkun.hong
• [PATCH] gpio: pl061: hook request if gpio-ranges avaiable   k00278426
• [PATCH 3/3] arm64: psci: Add support to call cpu_suspend with deepest C state.   amit daniel kachhap
• [PATCH 2/3] arm64: psci: fix cpu_suspend to check idle state type for index   amit daniel kachhap
• [PATCH 1/2] spi/rockchip: fix bug that case spi can't go as fast as slave request   addy ke
• [PATCH 2/2] spi/rockchip: fix bug that cause spi transfer timed out in DMA duplex mode   addy ke
• [PATCH 1/2] spi/rockchip: fix bug that case spi can't go as fast as slave request   addy ke
• [PATCH] mmc: dw_mmc: add a quirk for the defferent bit of sdio interrupt   addy ke
• [PATCH] mmc: dw_mmc: add support for the other bit of sdio interrupt   addy ke
• [PATCH] mmc: dw_mmc: add support for the other bit of sdio interrupt   addy ke
• [PATCH] pwm-backlight: Turn off pwm backlight in probe   Ajay kumar
• [PATCH RESEND v7 00/11] Coresight framework and drivers   mathieu.poirier at linaro.org
• [PATCH RESEND v7 01/11] coresight: add CoreSight core layer framework   mathieu.poirier at linaro.org
• [PATCH RESEND v7 02/11] coresight-tmc: add CoreSight TMC driver   mathieu.poirier at linaro.org
• [PATCH RESEND v7 03/11] coresight-tpiu: add CoreSight TPIU driver   mathieu.poirier at linaro.org
• [PATCH RESEND v7 04/11] coresight-etb: add CoreSight ETB driver   mathieu.poirier at linaro.org
• [PATCH RESEND v7 05/11] coresight-funnel: add CoreSight Funnel driver   mathieu.poirier at linaro.org
• [PATCH RESEND v7 06/11] coresight-replicator: add CoreSight Replicator driver   mathieu.poirier at linaro.org
• [PATCH RESEND v7 07/11] coresight-etm: add CoreSight ETM/PTM driver   mathieu.poirier at linaro.org
• [PATCH RESEND v7 08/11] coresight: adding documentation for coresight   mathieu.poirier at linaro.org
• [PATCH RESEND v7 09/11] coresight: adding support for beagle and beagleXM   mathieu.poirier at linaro.org
• [PATCH RESEND v7 10/11] coresight: adding basic support for Vexpress TC2   mathieu.poirier at linaro.org
• [PATCH RESEND v7 11/11] ARM: removing support for etb/etm in "arch/arm/kernel/"   mathieu.poirier at linaro.org
• [PATCH v8 00/11] Coresight framework and drivers   mathieu.poirier at linaro.org
• [PATCH v8 01/11] coresight: add CoreSight core layer framework   mathieu.poirier at linaro.org
• [PATCH v8 02/11] coresight-tmc: add CoreSight TMC driver   mathieu.poirier at linaro.org
• [PATCH v8 03/11] coresight-tpiu: add CoreSight TPIU driver   mathieu.poirier at linaro.org
• [PATCH v8 04/11] coresight-etb: add CoreSight ETB driver   mathieu.poirier at linaro.org
• [PATCH v8 05/11] coresight-funnel: add CoreSight Funnel driver   mathieu.poirier at linaro.org
• [PATCH v8 06/11] coresight-replicator: add CoreSight Replicator driver   mathieu.poirier at linaro.org
• [PATCH v8 07/11] coresight-etm: add CoreSight ETM/PTM driver   mathieu.poirier at linaro.org
• [PATCH v8 08/11] coresight: documentation for coresight framework and drivers   mathieu.poirier at linaro.org
• [PATCH v8 09/11] coresight: adding support for beagle and beagleXM   mathieu.poirier at linaro.org
• [PATCH v8 10/11] coresight: adding basic support for Vexpress TC2   mathieu.poirier at linaro.org
• [PATCH v8 11/11] ARM: removing support for etb/etm in "arch/arm/kernel/"   mathieu.poirier at linaro.org
• [PATCH] ARM: supplementing IO accessors with 64 bit capability   mathieu.poirier at linaro.org
• [PATCH v2] ARM: supplementing IO accessors with 64 bit capability   mathieu.poirier at linaro.org
• [PATCH v3] ARM: supplementing IO accessors with 64 bit capability   mathieu.poirier at linaro.org
• [PATCH v0] ARMv8:mm:Support the DEBUG_PAGEALLOC   zhichang.yuan at linaro.org
• [PATCH] arm: armv7: perf: fix armv7 ref-cycles error   gregkh at linuxfoundation.org
• [PATCH] arm: armv7: perf: fix armv7 ref-cycles error   gregkh at linuxfoundation.org
• [PATCH] arm: armv7: perf: fix armv7 ref-cycles error   gregkh at linuxfoundation.org
• [PATCH 0/3] Add Reset Controller for MediaTek SoC   flora.fu at mediatek.com
• [PATCH 1/3] ARM: mediatek: Add Reset Controller for MediaTek SoC   flora.fu at mediatek.com
• [PATCH 2/3] dt-bindings: Add Reset Controller for MediaTek SoC   flora.fu at mediatek.com
• [PATCH 3/3] ARM: dts: mt8135: Add Reset Controller for MediaTek SoC   flora.fu at mediatek.com
• [PATCH v2 0/2] socfpga: fix hotplug/add suspend to ram   atull at opensource.altera.com
• [PATCH v2 1/2] socfpga: hotplug: put cpu1 in wfi   atull at opensource.altera.com
• [PATCH v2 2/2] socfpga: support suspend to ram   atull at opensource.altera.com
• [PATCH v3 0/2] socfpga: fix hotplug/add suspend to ram   atull at opensource.altera.com
• [PATCH v3 1/2] socfpga: hotplug: put cpu1 in wfi   atull at opensource.altera.com
• [PATCH v3 2/2] socfpga: support suspend to ram   atull at opensource.altera.com
• [PATCH] arm: socfpga: fix fetching cpu1start_addr for system with > 2GB of ram   dinguyen at opensource.altera.com
• [PATCHv2] arm: socfpga: fix fetching cpu1start_addr for system with > 2GB of ram   dinguyen at opensource.altera.com
• [PATCHv3] arm: socfpga: fix fetching cpu1start_addr for SMP   dinguyen at opensource.altera.com
• [PATCHv4] arm: socfpga: fix fetching cpu1start_addr for SMP   dinguyen at opensource.altera.com
• [PATCH 0/2] ARM: dts: socfpga: fix booting with SD/MMC   dinguyen at opensource.altera.com
• [PATCH 1/2] ARM: dts: socfpga: Fix SD card detect   dinguyen at opensource.altera.com
• [PATCH 2/2] ARM: dts: socfpga: Add a 3.3V fixed regulator node   dinguyen at opensource.altera.com
• [PATCHv2 0/2] ARM: dts: socfpga: fix booting with SD/MMC   dinguyen at opensource.altera.com
• [PATCHv2 1/2] ARM: dts: socfpga: Fix SD card detect   dinguyen at opensource.altera.com
• [PATCHv2 2/2] ARM: dts: socfpga: Add a 3.3V fixed regulator node   dinguyen at opensource.altera.com
• [PATCHv3 0/2] ARM: dts: socfpga: fix booting with SD/MMC   dinguyen at opensource.altera.com
• [PATCHv3 1/2] ARM: dts: socfpga: Fix SD card detect   dinguyen at opensource.altera.com
• [PATCHv3 2/2] ARM: dts: socfpga: Add a 3.3V fixed regulator node   dinguyen at opensource.altera.com
• [PATCH] ARM: socfpga_defconfig: Update defconfig for SoCFPGA   dinguyen at opensource.altera.com
• [PATCHv4 0/3] ARM: dts: socfpga: fix booting with SD/MMC   dinguyen at opensource.altera.com
• [PATCHv4 1/3] ARM: dts: socfpga: rename gpio nodes   dinguyen at opensource.altera.com
• [PATCHv4 2/3] ARM: dts: socfpga: Fix SD card detect   dinguyen at opensource.altera.com
• [PATCHv4 3/3] ARM: dts: socfpga: Add a 3.3V fixed regulator node   dinguyen at opensource.altera.com
• [GIT PULL] SOCFPGA fixes for 3.18   dinguyen at opensource.altera.com
• [GIT PULL] SOCFPGA defconfig update for v3.19   dinguyen at opensource.altera.com
• [PATCH] arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC   dinguyen at opensource.altera.com
• [PATCHv2 0/4] Add Altera peripheral memories to EDAC framework   tthayer at opensource.altera.com
• [PATCHv2 1/4] arm: socfpga: Enable L2 Cache ECC on startup.   tthayer at opensource.altera.com
• [PATCHv2 2/4] arm: socfpga: Enable OCRAM ECC on startup.   tthayer at opensource.altera.com
• [PATCHv2 3/4] edac: altera: Add Altera L2 and OCRAM EDAC support   tthayer at opensource.altera.com
• [PATCHv2 4/4] arm: dts: Add Altera L2 Cache and OCRAM EDAC   tthayer at opensource.altera.com
• [PATCHv3 0/5] Add Altera peripheral memories to EDAC framework   tthayer at opensource.altera.com
• [PATCHv3 1/5] arm: socfpga: Enable L2 Cache ECC on startup.   tthayer at opensource.altera.com
• [PATCHv3 2/5] arm: socfpga: Enable OCRAM ECC on startup.   tthayer at opensource.altera.com
• [PATCHv3 3/5] edac: altera: Remove SDRAM module compile   tthayer at opensource.altera.com
• [PATCHv3 4/5] edac: altera: Add Altera L2 Cache and OCRAM EDAC Support   tthayer at opensource.altera.com
• [PATCHv3 5/5] arm: dts: Add Altera L2 Cache and OCRAM EDAC   tthayer at opensource.altera.com
• [PATCH 0/4] add suspend support for RK3288   zyw at rock-chips.com
• [PATCH 1/4] ARM: rockchip: add suspend and resume for RK3288   zyw at rock-chips.com
• [PATCH 2/4] clk: rockchip: RK3288: add suspend and resume   zyw at rock-chips.com
• [PATCH 3/4] ARM: dts: add RK3288 suspend support   zyw at rock-chips.com
• [PATCH 4/4] ARM: rockchip: add pmu-sram sub   zyw at rock-chips.com
• [PATCH v2 0/4] add suspend support for RK3288   zyw at rock-chips.com
• [PATCH v2 1/4] clk: rockchip: RK3288: add suspend and resume   zyw at rock-chips.com
• [PATCH v2 2/4] ARM: rockchip: add suspend and resume for RK3288   zyw at rock-chips.com
• [PATCH v2 3/4] ARM: rockchip: Add pmu-sram binding   zyw at rock-chips.com
• [PATCH v2 4/4] ARM: dts: add RK3288 suspend support   zyw at rock-chips.com
• [PATCH v3 0/6] add suspend support for RK3288   zyw at rock-chips.com
• [PATCH v3 1/6] pinctrl: rockchip: add suspend/resume functions   zyw at rock-chips.com
• [PATCH v3 2/6] pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume   zyw at rock-chips.com
• [PATCH v3 3/6] clk: rockchip: RK3288: add suspend and resume   zyw at rock-chips.com
• [PATCH v3 4/6] ARM: rockchip: add suspend and resume for RK3288   zyw at rock-chips.com
• [PATCH v3 5/6] ARM: rockchip: Add pmu-sram binding   zyw at rock-chips.com
• [PATCH v3 6/6] ARM: dts: add RK3288 suspend support   zyw at rock-chips.com
• [PATCH 0/8] power_supply: Add API for safe access of get_property-like function attrs   jonghwa3.lee at samsung.com
• [linux-sunxi] [PATCH 2/4] pinctrl: sunxi: Add A80 pinctrl muxing options   dannym at scratchpost.org
• [PATCH v2 0/4] Enable PCI controller for Keystone SoCs   santosh shilimkar
• [RFC PATCH v3 5/7] dma-mapping: detect and configure IOMMU in of_dma_configure   jroedel at suse.de
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   post at twien.net
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   post at twien.net
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   post at twien.net
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   post at twien.net
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   post at twien.net
• ARMADA 370 - Distributed Switch Architecture (dsa) - device tree   post at twien.net
• where/how arm start first jump from svc to user in kernel   vichy
• where/how arm start first jump from svc to user in kernel   vichy
• where/how arm start first jump from svc to user in kernel   vichy
• where/how arm start first jump from svc to user in kernel   vichy
• where/how arm start first jump from svc to user in kernel   vichy
• [PATCH v3 6/8] phy: miphy28lp: Add SSC support for PCIE   Valdis.Kletnieks at vt.edu
• [PATCH v2 00/15] KVM GICv3 emulation   wanghaibin
• [PATCH 1/2] ARM: perf: armv7 remove useless return and check of idx in counter handling   chai wen
• [PATCH 2/2] ARM: perf: armv7: wrap unsupported arch init functions via micro   chai wen
• [PATCH resend] ARM: perf: remove useless return and check of idx in counter handling   chai wen
• [PATCH v3 2/3] i2c: hix5hd2: add i2c controller driver   zhangfei
• [PATCH v3 2/3] i2c: hix5hd2: add i2c controller driver   zhangfei
• [PATCH v4 2/3] i2c: hix5hd2: add i2c controller driver   zhangfei
• [PATCH v5 3/3] ARM: dts: hix5hd2: add i2c node   zhangfei
• [PATCH] arm: armv7: perf: fix armv7 ref-cycles error   zhangzhiqiang
• [PATCH] arm: armv7: perf: fix armv7 ref-cycles error   zhangzhiqiang
• [PATCH] arm: armv7: perf: fix armv7 ref-cycles error   zhangzhiqiang
• [PATCH v0] ARMv8:mm:Support the DEBUG_PAGEALLOC   zhichang.yuan