[RFC Patch 2/4] mfd: AXP20x: Add power supply sub-driver
Bruno Prémont
bonbons at linux-vserver.org
Tue Oct 21 23:30:13 PDT 2014
On Tue, 21 Oct 2014 22:27:15 +0200 Maxime Ripard wrote:
> On Mon, Oct 20, 2014 at 10:33:20PM +0200, Bruno Prémont wrote:
> > Add driver for the power supply features of AXP20x PMIC.
> >
> > Covered features:
> > - backup / RTC battery
> > - VBUS/OTG power input
> > - AC power input
> > - LIon battery charger
>
> Missing Signed-off-by
Oops, forgot that when splitting the original patch
into multiple parts.
> > ---
> > drivers/mfd/axp20x.c | 106 +-
> > drivers/power/Kconfig | 9 +
> > drivers/power/Makefile | 1 +
> > drivers/power/axp20x_power.c | 1530 ++++++++++++++++++++++
> > include/linux/mfd/axp20x.h | 5 +
> > 5 files changed, 1650 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/power/axp20x_power.c
> >
> > diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> > index dee6539..1322489 100644
> > --- a/drivers/mfd/axp20x.c
> > +++ b/drivers/mfd/axp20x.c
> > @@ -31,10 +31,16 @@
> > static const struct regmap_range axp20x_writeable_ranges[] = {
> > regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
> > regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
> > + regmap_reg_range(AXP20X_OCV(0), AXP20X_OCV(15)),
> > };
> >
> > static const struct regmap_range axp20x_volatile_ranges[] = {
> > + regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP20X_USB_OTG_STATUS),
> > + regmap_reg_range(AXP20X_CHRG_CTRL1, AXP20X_CHRG_CTRL2),
> > regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
> > + regmap_reg_range(AXP20X_ACIN_V_ADC_H, AXP20X_IPSOUT_V_HIGH_L),
> > + regmap_reg_range(AXP20X_GPIO20_SS, AXP20X_GPIO3_CTRL),
> > + regmap_reg_range(AXP20X_FG_RES, AXP20X_RDC_L),
> > };
> >
> > static const struct regmap_access_table axp20x_writeable_table = {
> > @@ -61,12 +67,106 @@ static struct resource axp20x_pek_resources[] = {
> > },
> > };
> >
> > +static struct resource axp20x_power_resources[] = {
> > + {
> > + .name = "ACIN_OVER_V",
> > + .start = AXP20X_IRQ_ACIN_OVER_V,
> > + .end = AXP20X_IRQ_ACIN_OVER_V,
> > + .flags = IORESOURCE_IRQ,
> > + }, {
> > + .name = "ACIN_PLUGIN",
> > + .start = AXP20X_IRQ_ACIN_PLUGIN,
> > + .end = AXP20X_IRQ_ACIN_PLUGIN,
> > + .flags = IORESOURCE_IRQ,
> > + }, {
> > + .name = "ACIN_REMOVAL",
> > + .start = AXP20X_IRQ_ACIN_REMOVAL,
> > + .end = AXP20X_IRQ_ACIN_REMOVAL,
> > + .flags = IORESOURCE_IRQ,
> > + }, {
> > + .name = "VBUS_OVER_V",
> > + .start = AXP20X_IRQ_VBUS_OVER_V,
> > + .end = AXP20X_IRQ_VBUS_OVER_V,
> > + .flags = IORESOURCE_IRQ,
> > + }, {
> > + .name = "VBUS_PLUGIN",
> > + .start = AXP20X_IRQ_VBUS_PLUGIN,
> > + .end = AXP20X_IRQ_VBUS_PLUGIN,
> > + .flags = IORESOURCE_IRQ,
> > + }, {
> > + .name = "VBUS_REMOVAL",
> > + .start = AXP20X_IRQ_VBUS_REMOVAL,
> > + .end = AXP20X_IRQ_VBUS_REMOVAL,
> > + .flags = IORESOURCE_IRQ,
> > + }, {
> > + .name = "VBUS_V_LOW",
> > + .start = AXP20X_IRQ_VBUS_V_LOW,
> > + .end = AXP20X_IRQ_VBUS_V_LOW,
> > + .flags = IORESOURCE_IRQ,
> > + }, {
> > + .name = "BATT_PLUGIN",
> > + .start = AXP20X_IRQ_BATT_PLUGIN,
> > + .end = AXP20X_IRQ_BATT_PLUGIN,
> > + .flags = IORESOURCE_IRQ,
> > + }, {
> > + .name = "BATT_REMOVAL",
> > + .start = AXP20X_IRQ_BATT_REMOVAL,
> > + .end = AXP20X_IRQ_BATT_REMOVAL,
> > + .flags = IORESOURCE_IRQ,
> > + }, {
> > + .name = "BATT_ACTIVATE",
> > + .start = AXP20X_IRQ_BATT_ENT_ACT_MODE,
> > + .end = AXP20X_IRQ_BATT_ENT_ACT_MODE,
> > + .flags = IORESOURCE_IRQ,
> > + }, {
> > + .name = "BATT_ACTIVATED",
> > + .start = AXP20X_IRQ_BATT_EXIT_ACT_MODE,
> > + .end = AXP20X_IRQ_BATT_EXIT_ACT_MODE,
> > + .flags = IORESOURCE_IRQ,
> > + }, {
> > + .name = "BATT_CHARGING",
> > + .start = AXP20X_IRQ_CHARG,
> > + .end = AXP20X_IRQ_CHARG,
> > + .flags = IORESOURCE_IRQ,
> > + }, {
> > + .name = "BATT_CHARGED",
> > + .start = AXP20X_IRQ_CHARG_DONE,
> > + .end = AXP20X_IRQ_CHARG_DONE,
> > + .flags = IORESOURCE_IRQ,
> > + }, {
> > + .name = "BATT_HOT",
> > + .start = AXP20X_IRQ_BATT_TEMP_HIGH,
> > + .end = AXP20X_IRQ_BATT_TEMP_HIGH,
> > + .flags = IORESOURCE_IRQ,
> > + }, {
> > + .name = "BATT_COLD",
> > + .start = AXP20X_IRQ_BATT_TEMP_LOW,
> > + .end = AXP20X_IRQ_BATT_TEMP_LOW,
> > + .flags = IORESOURCE_IRQ,
> > + }, {
> > + .name = "BATT_CHG_CURR_LOW",
> > + .start = AXP20X_IRQ_CHARG_I_LOW,
> > + .end = AXP20X_IRQ_CHARG_I_LOW,
> > + .flags = IORESOURCE_IRQ,
> > + }, {
> > + .name = "POWER_LOW_WARN",
> > + .start = AXP20X_IRQ_LOW_PWR_LVL1,
> > + .end = AXP20X_IRQ_LOW_PWR_LVL1,
> > + .flags = IORESOURCE_IRQ,
> > + }, {
> > + .name = "POWER_LOW_CRIT",
> > + .start = AXP20X_IRQ_LOW_PWR_LVL2,
> > + .end = AXP20X_IRQ_LOW_PWR_LVL2,
> > + .flags = IORESOURCE_IRQ,
> > + },
> > +};
> > +
> > static const struct regmap_config axp20x_regmap_config = {
> > .reg_bits = 8,
> > .val_bits = 8,
> > .wr_table = &axp20x_writeable_table,
> > .volatile_table = &axp20x_volatile_table,
> > - .max_register = AXP20X_FG_RES,
> > + .max_register = AXP20X_OCV(15),
> > .cache_type = REGCACHE_RBTREE,
> > };
> >
> > @@ -158,6 +258,10 @@ static struct mfd_cell axp20x_cells[] = {
> > .name = "axp20x-regulator",
> > .parent_supplies = axp20x_supplies,
> > .num_parent_supplies = ARRAY_SIZE(axp20x_supplies),
> > + }, {
> > + .name = "axp20x-power",
> > + .num_resources = ARRAY_SIZE(axp20x_power_resources),
> > + .resources = axp20x_power_resources,
> > },
> > };
> >
> > diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
> > index 73cfcdf..209d677 100644
> > --- a/drivers/power/Kconfig
> > +++ b/drivers/power/Kconfig
> > @@ -396,6 +396,15 @@ config BATTERY_GOLDFISH
> > Say Y to enable support for the battery and AC power in the
> > Goldfish emulator.
> >
> > +config AXP20X_POWER
> > + tristate "AXP20x power supply driver"
> > + depends on MFD_AXP20X
> > + help
> > + This driver provides support for the power supply features of
> > + AXP20x PMIC.
> > + Included features are: AC-power, USB-power, Battery charger
> > + (RTC backup-battery and Lithium main bettery).
> > +
> > source "drivers/power/reset/Kconfig"
>
> This patch should be splitted in two, one to add the new resources,
> the other one to add the new driver.
Ok
> > endif # POWER_SUPPLY
> > diff --git a/drivers/power/Makefile b/drivers/power/Makefile
> > index dfa8942..ab2324f 100644
> > --- a/drivers/power/Makefile
> > +++ b/drivers/power/Makefile
> > @@ -9,6 +9,7 @@ obj-$(CONFIG_GENERIC_ADC_BATTERY) += generic-adc-battery.o
> >
> > obj-$(CONFIG_PDA_POWER) += pda_power.o
> > obj-$(CONFIG_APM_POWER) += apm_power.o
> > +obj-$(CONFIG_AXP20X_POWER) += axp20x_power.o
> > obj-$(CONFIG_MAX8925_POWER) += max8925_power.o
> > obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.o
> > obj-$(CONFIG_WM831X_POWER) += wm831x_power.o
> > diff --git a/drivers/power/axp20x_power.c b/drivers/power/axp20x_power.c
> > new file mode 100644
> > index 0000000..9d6b8bc
> > --- /dev/null
> > +++ b/drivers/power/axp20x_power.c
> > @@ -0,0 +1,1530 @@
> > +/*
> > + * AC power input driver for X-Powers AXP20x PMICs
> > + *
> > + * Copyright 2014 Bruno Prémont <bonbons at linux-vserver.org>
> > + *
> > + * This file is subject to the terms and conditions of the GNU General
> > + * Public License. See the file "COPYING" in the main directory of this
> > + * archive for more details.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/err.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/irq.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/power_supply.h>
> > +#include <linux/regmap.h>
> > +#include <linux/slab.h>
> > +#include <linux/time.h>
> > +#include <linux/mfd/axp20x.h>
> > +
> > +struct axp20x_power {
> > + struct axp20x_dev *axp20x;
> > + /* RTC / Backup battery */
> > + struct power_supply backup;
> > + char backup_name[24];
> > + /* ACIN power supply */
> > + struct power_supply ac;
> > + char ac_name[24];
> > + /* VBUS/OTG power supply */
> > + struct power_supply vbus;
> > + char vbus_name[24];
> > + /* Battery charger */
> > + struct power_supply battery;
> > + char battery_name[24];
> > + char *battery_supplies[2];
> > + /* AXP state tracking */
> > + struct work_struct work;
> > + spinlock_t lock;
> > + struct timespec next_check;
> > + uint8_t status1;
> > + uint8_t status2;
> > + uint8_t vbusmgt;
> > + int vvbus;
> > + int ivbus;
> > + int vac;
> > + int iac;
> > + int vbatt;
> > + int ibatt;
> > + int pbatt;
> > + int tbatt;
> > + int tbatt_min;
> > + int tbatt_max;
> > + int batt_percent;
> > + int batt_capacity;
> > + int batt_health;
> > + int batt_user_imax;
> > +};
> > +
> > +/* Fields of AXP20X_PWR_INPUT_STATUS */
> > +#define AXP20X_PWR_STATUS_AC_PRESENT (1 << 7)
> > +#define AXP20X_PWR_STATUS_AC_AVAILABLE (1 << 6)
> > +#define AXP20X_PWR_STATUS_VBUS_PRESENT (1 << 5)
> > +#define AXP20X_PWR_STATUS_VBUS_AVAILABLE (1 << 4)
> > +#define AXP20X_PWR_STATUS_VBUS_VHOLD (1 << 3)
> > +#define AXP20X_PWR_STATUS_BAT_CHARGING (1 << 2)
> > +#define AXP20X_PWR_STATUS_AC_VBUS_SHORT (1 << 1)
> > +#define AXP20X_PWR_STATUS_AC_VBUS_SEL (1 << 0)
> > +
> > +/* Fields of AXP20X_PWR_OP_MODE */
> > +#define AXP20X_PWR_OP_OVERTEMP (1 << 7)
> > +#define AXP20X_PWR_OP_CHARGING (1 << 6)
> > +#define AXP20X_PWR_OP_BATT_PRESENT (1 << 5)
> > +#define AXP20X_PWR_OP_BATT_ACTIVATED (1 << 3)
> > +#define AXP20X_PWR_OP_BATT_CHG_CURRENT_LOW (1 << 2)
> > +
> > +/* Fields of AXP20X_ADC_EN1 */
> > +#define AXP20X_ADC_EN1_BATT_V (1 << 7)
> > +#define AXP20X_ADC_EN1_BATT_C (1 << 6)
> > +#define AXP20X_ADC_EN1_ACIN_V (1 << 5)
> > +#define AXP20X_ADC_EN1_ACIN_C (1 << 4)
> > +#define AXP20X_ADC_EN1_VBUS_V (1 << 3)
> > +#define AXP20X_ADC_EN1_VBUS_C (1 << 2)
> > +#define AXP20X_ADC_EN1_APS_V (1 << 1)
> > +#define AXP20X_ADC_EN1_TEMP (1 << 0)
> > +
> > +/* Fields of AXP20X_ADC_RATE */
> > +#define AXP20X_ADR_RATE_MASK (3 << 6)
> > +#define AXP20X_ADR_RATE_25Hz (0 << 6)
> > +#define AXP20X_ADR_RATE_50Hz (1 << 6)
> > +#define AXP20X_ADR_RATE_100Hz (2 << 6)
> > +#define AXP20X_ADR_RATE_200Hz (3 << 6)
> > +#define AXP20X_ADR_TS_CURR_MASK (3 << 4)
> > +#define AXP20X_ADR_TS_CURR_20uA (0 << 4)
> > +#define AXP20X_ADR_TS_CURR_40uA (1 << 4)
> > +#define AXP20X_ADR_TS_CURR_60uA (2 << 4)
> > +#define AXP20X_ADR_TS_CURR_80uA (3 << 4)
> > +#define AXP20X_ADR_TS_UNRELATED (1 << 2)
> > +#define AXP20X_ADR_TS_WHEN_MASK (3 << 0)
> > +#define AXP20X_ADR_TS_WHEN_OFF (0 << 0)
> > +#define AXP20X_ADR_TS_WHEN_CHG (1 << 0)
> > +#define AXP20X_ADR_TS_WHEN_ADC (2 << 0)
> > +#define AXP20X_ADR_TS_WHEN_ON (3 << 0)
> > +
> > +/* Fields of AXP20X_VBUS_IPSOUT_MGMT */
> > +#define AXP20X_VBUS_VHOLD_MASK (7 << 3)
> > +#define AXP20X_VBUS_VHOLD_mV(b) (4000000 + (((b) >> 3) & 7) * 100000)
> > +#define AXP20X_VBUS_CLIMIT_MASK (3)
> > +#define AXP20X_VBUC_CLIMIT_900mA (0)
> > +#define AXP20X_VBUC_CLIMIT_500mA (1)
> > +#define AXP20X_VBUC_CLIMIT_100mA (2)
> > +#define AXP20X_VBUC_CLIMIT_NONE (3)
> > +
> > +/* Fields of AXP20X_OFF_CTRL */
> > +#define AXP20X_OFF_CTRL_BATT_MON (1 << 6)
> > +#define AXP20X_OFF_CTRL_CHGLED_MASK (3 << 4)
> > +#define AXP20X_OFF_CTRL_CHGLED_HR (0 << 4)
> > +#define AXP20X_OFF_CTRL_CHGLED_1Hz (1 << 4)
> > +#define AXP20X_OFF_CTRL_CHGLED_4Hz (2 << 4)
> > +#define AXP20X_OFF_CTRL_CHGLED_LOW (3 << 4)
> > +#define AXP20X_OFF_CTRL_CHGLED_FIX (1 << 3)
> > +/* Fields of AXP20X_CHRG_CTRL1 */
> > +#define AXP20X_CHRG_CTRL1_ENABLE (1 << 7)
> > +#define AXP20X_CHRG_CTRL1_TGT_VOLT (3 << 5)
> > +#define AXP20X_CHRG_CTRL1_TGT_4_1V (0 << 5)
> > +#define AXP20X_CHRG_CTRL1_TGT_4_15V (1 << 5)
> > +#define AXP20X_CHRG_CTRL1_TGT_4_2V (2 << 5)
> > +#define AXP20X_CHRG_CTRL1_TGT_4_36V (3 << 5)
> > +#define AXP20X_CHRG_CTRL1_END_CURR (1 << 4)
> > +#define AXP20X_CHRG_CTRL1_TGT_CURR 0x0f
> > +/* Fields of AXP20X_CHRG_CTRL2 */
> > +#define AXP20X_CHRG_CTRL2_PRE_MASK (3 << 6)
> > +#define AXP20X_CHRG_CTRL2_PRE_40MIN (0 << 6)
> > +#define AXP20X_CHRG_CTRL2_PRE_50MIN (1 << 6)
> > +#define AXP20X_CHRG_CTRL2_PRE_60MIN (2 << 6)
> > +#define AXP20X_CHRG_CTRL2_PRE_70MIN (3 << 6)
> > +#define AXP20X_CHRG_CTRL2_CHGLED_FL (1 << 4)
> > +#define AXP20X_CHRG_CTRL2_CHG_MASK (0 << 6)
> > +#define AXP20X_CHRG_CTRL2_CHG_6H (0 << 0)
> > +#define AXP20X_CHRG_CTRL2_CHG_8H (1 << 0)
> > +#define AXP20X_CHRG_CTRL2_CHG_10H (2 << 6)
> > +#define AXP20X_CHRG_CTRL2_CHG_12H (3 << 0)
> > +/* Fields of AXP20X_FG_RES */
> > +#define AXP20X_FG_ENABLE (1 << 7)
> > +#define AXP20X_FG_PERCENT (0x7f)
>
> I guess these should be defined together with the registers.
I can do. I included them here as Carlo did for the PEK input driver
from which series I referenced the bindings documentation patch.
> > +
> > +static int axp20x_power_poll(struct axp20x_power *devdata, int init)
> > +{
> > + struct axp20x_dev *axp20x = devdata->axp20x;
> > + struct timespec ts;
> > + int ret, status1, status2, vbusmgt, adc_cfg, bpercent;
> > + uint8_t adc[19];
> > +
> > + getnstimeofday(&ts);
> > + /* only query hardware if our data is stale */
>
> Is it called that often?
Pretty often yes.
When accessing /sys/class/power_supply/*/uevent it's one call per
property, for the property specific sysfs files its one per file read.
Notifying power_supply subsystem about changes also triggers one access
per defined property.
Initially I tried without caching data and it caused quite severe
latencies (would have to redo the tests for proper quantifying).
I looked at regmap's caching feature but it seems not possible to tell
it to flush (part of) its cache.
> > + spin_lock(&devdata->lock);
> > + if (!init && !(ts.tv_sec > devdata->next_check.tv_sec ||
> > + ts.tv_nsec > devdata->next_check.tv_sec)) {
> > + spin_unlock(&devdata->lock);
> > + return 0;
> > + }
> > + spin_unlock(&devdata->lock);
> > +
> > + ret = regmap_read(axp20x->regmap, AXP20X_PWR_INPUT_STATUS, &status1);
> > + if (ret)
> > + return ret;
> > + ret = regmap_read(axp20x->regmap, AXP20X_PWR_OP_MODE, &status2);
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_read(axp20x->regmap, AXP20X_ADC_RATE, &adc_cfg);
> > + if (ret)
> > + return ret;
> > +
> > + if (init == 2) {
> > + int reg = AXP20X_ADC_EN1_VBUS_V | AXP20X_ADC_EN1_VBUS_C;
> > +
> > + if (!(status1 & AXP20X_PWR_STATUS_AC_VBUS_SHORT))
> > + reg |= AXP20X_ADC_EN1_ACIN_V | AXP20X_ADC_EN1_ACIN_C;
> > + if (devdata->battery_name[0])
> > + reg |= AXP20X_ADC_EN1_BATT_V | AXP20X_ADC_EN1_BATT_C;
> > + if (devdata->battery_name[0] &&
> > + !(adc_cfg & AXP20X_ADR_TS_UNRELATED))
> > + reg |= AXP20X_ADC_EN1_TEMP;
> > +
> > + regmap_update_bits(axp20x->regmap, AXP20X_ADC_EN1,
> > + AXP20X_ADC_EN1_ACIN_V | AXP20X_ADC_EN1_ACIN_C |
> > + AXP20X_ADC_EN1_VBUS_V | AXP20X_ADC_EN1_VBUS_C |
> > + AXP20X_ADC_EN1_BATT_V | AXP20X_ADC_EN1_BATT_C |
> > + AXP20X_ADC_EN1_TEMP, reg);
> > + }
> > +
> > + ret = regmap_read(axp20x->regmap, AXP20X_VBUS_IPSOUT_MGMT, &vbusmgt);
> > + if (ret)
> > + return ret;
> > +
> > + ret = regmap_bulk_read(axp20x->regmap, AXP20X_ACIN_V_ADC_H, adc, 8);
> > + if (ret)
> > + return ret;
> > + if (devdata->battery_name[0] && !(adc_cfg & AXP20X_ADR_TS_UNRELATED)) {
> > + ret = regmap_bulk_read(axp20x->regmap, AXP20X_TS_IN_H, adc+8, 2);
> > + if (ret)
> > + return ret;
> > + }
> > + if (devdata->battery_name[0]) {
> > + ret = regmap_bulk_read(axp20x->regmap, AXP20X_PWR_BATT_H, adc+10, 3);
> > + if (ret)
> > + return ret;
> > + ret = regmap_bulk_read(axp20x->regmap, AXP20X_BATT_V_H, adc+13, 6);
> > + if (ret)
> > + return ret;
> > + ret = regmap_read(axp20x->regmap, AXP20X_FG_RES, &bpercent);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + switch (adc_cfg & AXP20X_ADR_RATE_MASK) {
> > + case AXP20X_ADR_RATE_200Hz:
> > + timespec_add_ns(&ts, 5000000); break;
> > + case AXP20X_ADR_RATE_100Hz:
> > + timespec_add_ns(&ts, 10000000); break;
> > + case AXP20X_ADR_RATE_50Hz:
> > + timespec_add_ns(&ts, 20000000); break;
> > + case AXP20X_ADR_RATE_25Hz:
> > + default:
> > + timespec_add_ns(&ts, 40000000);
> > + }
> > +
> > + ret = devdata->status1 | (devdata->status2 << 8) |
> > + ((devdata->batt_percent & 0x7f) << 16);
> > + if (init == 2)
> > + timespec_add_ns(&ts, 200000000);
> > + spin_lock(&devdata->lock);
> > + devdata->vac = ((adc[0] << 4) | (adc[1] & 0x0f)) * 1700;
> > + devdata->iac = ((adc[2] << 4) | (adc[3] & 0x0f)) * 625;
> > + devdata->vvbus = ((adc[4] << 4) | (adc[5] & 0x0f)) * 1700;
> > + devdata->ivbus = ((adc[6] << 4) | (adc[7] & 0x0f)) * 375;
> > + devdata->next_check = ts;
> > + devdata->vbusmgt = vbusmgt;
> > + devdata->status1 = status1;
> > + devdata->status2 = status2;
> > + if (devdata->battery_name[0] && !(adc_cfg & AXP20X_ADR_TS_UNRELATED))
> > + devdata->tbatt = ((adc[8] << 4) | (adc[9] & 0x0f)) * 800;
> > + if (devdata->battery_name[0]) {
> > + devdata->vbatt = ((adc[13] << 4) | (adc[14] & 0x0f)) * 1100;
> > + if (status1 & AXP20X_PWR_STATUS_BAT_CHARGING)
> > + devdata->ibatt = ((adc[15] << 4) | (adc[16] & 0x0f));
> > + else
> > + devdata->ibatt = ((adc[17] << 4) | (adc[18] & 0x0f));
> > + devdata->ibatt *= 500;
> > + devdata->pbatt = ((adc[10] << 16) | (adc[11] << 8) | adc[12]) *
> > + 55 / 100;
> > + devdata->batt_percent = bpercent & 0x7f;
> > + }
> > + spin_unlock(&devdata->lock);
> > +
> > + if (init == 2 || init == 0)
> > + return 0;
> > +
> > + if ((ret ^ status1) & (AXP20X_PWR_STATUS_VBUS_PRESENT |
> > + AXP20X_PWR_STATUS_VBUS_AVAILABLE))
> > + power_supply_changed(&devdata->vbus);
> > + if (devdata->ac_name[0]) {
> > + } else if ((ret ^ status1) & (AXP20X_PWR_STATUS_AC_PRESENT |
> > + AXP20X_PWR_STATUS_AC_AVAILABLE))
> > + power_supply_changed(&devdata->ac);
> > + if (!devdata->battery_name[0]) {
> > + } else if ((ret ^ status1) & AXP20X_PWR_STATUS_BAT_CHARGING) {
> > + power_supply_changed(&devdata->battery);
> > + } else if (((ret >> 8) ^ status2) & (AXP20X_PWR_OP_CHARGING |
> > + AXP20X_PWR_OP_BATT_PRESENT | AXP20X_PWR_OP_BATT_ACTIVATED |
> > + AXP20X_PWR_OP_BATT_CHG_CURRENT_LOW)) {
> > + power_supply_changed(&devdata->battery);
> > + } else if (((ret >> 16) & 0x7f) != (bpercent & 0x7f)) {
> > + power_supply_changed(&devdata->battery);
> > + }
> > + return 0;
> > +}
> > +
> > +static void axp20x_power_monitor(struct work_struct *work)
> > +{
> > + struct axp20x_power *devdata = container_of(work,
> > + struct axp20x_power, work);
> > +
> > + axp20x_power_poll(devdata, 1);
> > +
> > + /* TODO: check status for consitency
> > + * adjust battery charging parameters as needed
> > + */
> > +}
> > +
> > +/* ********************************************** *
> > + * *** RTC / Backup battery charger *** *
> > + * ********************************************** */
> > +
> > +/* Fields of AXP20X_CHRG_BAK_CTRL */
> > +#define AXP20X_BACKUP_ENABLE (0x01 << 7)
> > +#define AXP20X_BACKUP_VOLTAGE_MASK (0x03 << 5)
> > +#define AXP20X_BACKUP_VOLTAGE_3_1V (0x00 << 5)
> > +#define AXP20X_BACKUP_VOLTAGE_3_0V (0x01 << 5)
> > +#define AXP20X_BACKUP_VOLTAGE_3_6V (0x02 << 5)
> > +#define AXP20X_BACKUP_VOLTAGE_2_5V (0x03 << 5)
> > +#define AXP20X_BACKUP_CURRENT_MASK 0x03
> > +#define AXP20X_BACKUP_CURRENT_50uA 0x00
> > +#define AXP20X_BACKUP_CURRENT_100uA 0x01
> > +#define AXP20X_BACKUP_CURRENT_200uA 0x02
> > +#define AXP20X_BACKUP_CURRENT_400uA 0x03
> > +
> > +static int axp20x_backup_config(struct platform_device *pdev,
> > + struct axp20x_dev *axp20x)
> > +{
> > + struct device_node *np;
> > + int ret = 0, reg, new_reg = 0;
> > + u32 lim[2];
> > +
> > + ret = regmap_read(axp20x->regmap, AXP20X_CHRG_BAK_CTRL, ®);
> > + if (ret)
> > + return ret;
> > +
> > + np = of_node_get(axp20x->dev->of_node);
> > + if (!np)
> > + return -ENODEV;
> > +
> > + ret = of_property_read_u32_array(np, "backup", lim, 2);
> > + if (ret != 0)
> > + goto err;
> > +
> > + switch (lim[0]) {
> > + case 2500000:
> > + new_reg |= AXP20X_BACKUP_VOLTAGE_2_5V;
> > + break;
> > + case 3000000:
> > + new_reg |= AXP20X_BACKUP_VOLTAGE_3_0V;
> > + break;
> > + case 3100000:
> > + new_reg |= AXP20X_BACKUP_VOLTAGE_3_1V;
> > + break;
> > + case 3600000:
> > + new_reg |= AXP20X_BACKUP_VOLTAGE_3_6V;
> > + break;
> > + default:
> > + dev_warn(&pdev->dev, "Invalid backup DT voltage limit %u\n", lim[0]);
> > + ret = -EINVAL;
> > + goto err;
> > + }
> > + switch (lim[1]) {
> > + case 50:
> > + new_reg |= AXP20X_BACKUP_CURRENT_50uA;
> > + break;
> > + case 100:
> > + new_reg |= AXP20X_BACKUP_CURRENT_100uA;
> > + break;
> > + case 200:
> > + new_reg |= AXP20X_BACKUP_CURRENT_200uA;
> > + break;
> > + case 400:
> > + new_reg |= AXP20X_BACKUP_CURRENT_400uA;
> > + break;
> > + default:
> > + dev_warn(&pdev->dev, "Invalid backup DT current limit %u\n", lim[1]);
> > + ret = -EINVAL;
> > + goto err;
> > + }
> > + new_reg |= AXP20X_BACKUP_ENABLE;
> > +
> > + ret = regmap_update_bits(axp20x->regmap, AXP20X_CHRG_BAK_CTRL,
> > + AXP20X_BACKUP_ENABLE | AXP20X_BACKUP_VOLTAGE_MASK |
> > + AXP20X_BACKUP_CURRENT_MASK, new_reg);
> > + if (ret)
> > + dev_warn(&pdev->dev, "Failed to adjust backup battery settings: %d\n", ret);
> > +
> > +err:
> > + of_node_put(np);
> > + return ret;
> > +}
> > +
> > +static int axp20x_backup_get_prop(struct power_supply *psy,
> > + enum power_supply_property psp,
> > + union power_supply_propval *val)
> > +{
> > + struct axp20x_power *devdata = dev_get_drvdata(psy->dev->parent);
> > + int ret = 0, reg;
> > +
> > + ret = regmap_read(devdata->axp20x->regmap, AXP20X_CHRG_BAK_CTRL, ®);
> > + if (ret < 0)
> > + return ret;
> > +
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_STATUS:
> > + if ((reg & AXP20X_BACKUP_ENABLE))
> > + val->intval = POWER_SUPPLY_STATUS_CHARGING;
> > + else
> > + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> > + switch ((reg & AXP20X_BACKUP_VOLTAGE_MASK)) {
> > + case AXP20X_BACKUP_VOLTAGE_2_5V:
> > + val->intval = 2500000; break;
> > + case AXP20X_BACKUP_VOLTAGE_3_0V:
> > + val->intval = 3000000; break;
> > + case AXP20X_BACKUP_VOLTAGE_3_1V:
> > + val->intval = 3100000; break;
> > + case AXP20X_BACKUP_VOLTAGE_3_6V:
> > + val->intval = 3600000; break;
> > + default:
> > + val->intval = 0;
> > + }
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> > + switch ((reg & AXP20X_BACKUP_CURRENT_MASK)) {
> > + case AXP20X_BACKUP_CURRENT_50uA:
> > + val->intval = 50; break;
> > + case AXP20X_BACKUP_CURRENT_100uA:
> > + val->intval = 100; break;
> > + case AXP20X_BACKUP_CURRENT_200uA:
> > + val->intval = 200; break;
> > + case AXP20X_BACKUP_CURRENT_400uA:
> > + val->intval = 400; break;
> > + default:
> > + val->intval = 0;
> > + }
> > + break;
> > +
> > + default:
> > + ret = -EINVAL;
> > + break;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static int axp20x_backup_set_prop(struct power_supply *psy,
> > + enum power_supply_property psp,
> > + const union power_supply_propval *val)
> > +{
> > + struct axp20x_power *devdata = dev_get_drvdata(psy->dev->parent);
> > + int ret;
> > +
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_STATUS:
> > + if (val->intval == POWER_SUPPLY_STATUS_CHARGING)
> > + ret = regmap_update_bits(devdata->axp20x->regmap,
> > + AXP20X_CHRG_BAK_CTRL,
> > + AXP20X_BACKUP_ENABLE,
> > + AXP20X_BACKUP_ENABLE);
> > + else if (val->intval == POWER_SUPPLY_STATUS_NOT_CHARGING)
> > + ret = regmap_update_bits(devdata->axp20x->regmap,
> > + AXP20X_CHRG_BAK_CTRL,
> > + AXP20X_BACKUP_ENABLE, 0);
> > + else
> > + ret = -EINVAL;
> > + break;
> > +
> > + default:
> > + ret = -EINVAL;
> > + }
> > + return ret;
> > +}
> > +
> > +static int axp20x_backup_prop_writeable(struct power_supply *psy,
> > + enum power_supply_property psp)
> > +{
> > + return psp == POWER_SUPPLY_PROP_STATUS;
> > +}
> > +
> > +static enum power_supply_property axp20x_backup_props[] = {
> > + POWER_SUPPLY_PROP_STATUS,
> > + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
> > + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
> > +};
> > +
> > +/* ********************************************** *
> > + * *** ACIN power supply *** *
> > + * ********************************************** */
> > +
> > +static int axp20x_ac_get_prop(struct power_supply *psy,
> > + enum power_supply_property psp,
> > + union power_supply_propval *val)
> > +{
> > + struct axp20x_power *devdata = dev_get_drvdata(psy->dev->parent);
> > + int ret;
> > +
> > + ret = axp20x_power_poll(devdata, 0);
> > + if (ret)
> > + return ret;
> > +
> > + spin_lock(&devdata->lock);
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_PRESENT:
> > + val->intval = !!(devdata->status1 & AXP20X_PWR_STATUS_AC_PRESENT);
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_ONLINE:
> > + val->intval = !!(devdata->status1 & AXP20X_PWR_STATUS_AC_AVAILABLE);
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> > + val->intval = devdata->vac;
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_CURRENT_NOW:
> > + val->intval = devdata->iac;
> > + break;
> > +
> > + default:
> > + ret = -EINVAL;
> > + }
> > + spin_unlock(&devdata->lock);
> > +
> > + return ret;
> > +}
> > +
> > +static enum power_supply_property axp20x_ac_props[] = {
> > + POWER_SUPPLY_PROP_PRESENT,
> > + POWER_SUPPLY_PROP_ONLINE,
> > + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> > + POWER_SUPPLY_PROP_CURRENT_NOW,
> > +};
> > +
> > +/* ********************************************** *
> > + * *** VBUS power supply *** *
> > + * ********************************************** */
> > +
> > +static int axp20x_vbus_get_prop(struct power_supply *psy,
> > + enum power_supply_property psp,
> > + union power_supply_propval *val)
> > +{
> > + struct axp20x_power *devdata = dev_get_drvdata(psy->dev->parent);
> > + int ret;
> > +
> > + ret = axp20x_power_poll(devdata, 0);
> > + if (ret)
> > + return ret;
> > +
> > + spin_lock(&devdata->lock);
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_PRESENT:
> > + val->intval = !!(devdata->status1 & AXP20X_PWR_STATUS_VBUS_PRESENT);
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_ONLINE:
> > + val->intval = !!(devdata->status1 & AXP20X_PWR_STATUS_VBUS_AVAILABLE);
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> > + val->intval = devdata->vvbus;
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_CURRENT_NOW:
> > + val->intval = devdata->ivbus;
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_CURRENT_MAX:
> > + switch (devdata->vbusmgt & AXP20X_VBUS_CLIMIT_MASK) {
> > + case AXP20X_VBUC_CLIMIT_100mA:
> > + val->intval = 100000; break;
> > + case AXP20X_VBUC_CLIMIT_500mA:
> > + val->intval = 500000; break;
> > + case AXP20X_VBUC_CLIMIT_900mA:
> > + val->intval = 900000; break;
> > + case AXP20X_VBUC_CLIMIT_NONE:
> > + default:
> > + val->intval = -1;
> > + }
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_VOLTAGE_MIN:
> > + val->intval = AXP20X_VBUS_VHOLD_mV(devdata->vbusmgt);
> > + break;
> > +
> > + default:
> > + ret = -EINVAL;
> > + }
> > + spin_unlock(&devdata->lock);
> > +
> > + return ret;
> > +}
> > +
> > +static int axp20x_vbus_set_prop(struct power_supply *psy,
> > + enum power_supply_property psp,
> > + const union power_supply_propval *val)
> > +{
> > + struct axp20x_power *devdata = dev_get_drvdata(psy->dev->parent);
> > + int ret, reg;
> > +
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_CURRENT_MAX:
> > + if (val->intval == 100000)
> > + reg = AXP20X_VBUC_CLIMIT_100mA;
> > + else if (val->intval == 500000)
> > + reg = AXP20X_VBUC_CLIMIT_500mA;
> > + else if (val->intval == 900000)
> > + reg = AXP20X_VBUC_CLIMIT_900mA;
> > + else if (val->intval == -1)
> > + reg = AXP20X_VBUC_CLIMIT_NONE;
> > + else {
> > + ret = -EINVAL;
> > + break;
> > + }
> > + regmap_update_bits(devdata->axp20x->regmap,
> > + AXP20X_VBUS_IPSOUT_MGMT,
> > + AXP20X_VBUS_CLIMIT_MASK, reg);
> > + spin_lock(&devdata->lock);
> > + devdata->vbusmgt = (devdata->vbusmgt & ~AXP20X_VBUS_CLIMIT_MASK) |
> > + (reg & AXP20X_VBUS_CLIMIT_MASK);
> > + spin_unlock(&devdata->lock);
> > + ret = 0;
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_VOLTAGE_MIN:
> > + if (val->intval < 4000000) {
> > + ret = -EINVAL;
> > + break;
> > + } else
> > + reg = val->intval / 100000;
> > + if ((reg & 7) != reg) {
> > + ret = -EINVAL;
> > + break;
> > + } else
> > + reg = reg << 3;
> > + regmap_update_bits(devdata->axp20x->regmap,
> > + AXP20X_VBUS_IPSOUT_MGMT,
> > + AXP20X_VBUS_VHOLD_MASK, reg);
> > + spin_lock(&devdata->lock);
> > + devdata->vbusmgt = (devdata->vbusmgt & ~AXP20X_VBUS_VHOLD_MASK) |
> > + (reg & AXP20X_VBUS_VHOLD_MASK);
> > + spin_unlock(&devdata->lock);
> > + ret = 0;
> > + break;
> > +
> > + default:
> > + ret = -EINVAL;
> > + }
> > + return ret;
> > +}
> > +
> > +static enum power_supply_property axp20x_vbus_props[] = {
> > + POWER_SUPPLY_PROP_PRESENT,
> > + POWER_SUPPLY_PROP_ONLINE,
> > + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> > + POWER_SUPPLY_PROP_CURRENT_NOW,
> > + POWER_SUPPLY_PROP_VOLTAGE_MIN,
> > + POWER_SUPPLY_PROP_CURRENT_MAX,
> > +};
> > +
> > +static int axp20x_vbus_prop_writeable(struct power_supply *psy,
> > + enum power_supply_property psp)
> > +{
> > + return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN ||
> > + psp == POWER_SUPPLY_PROP_CURRENT_MAX;
> > +}
> > +
> > +
> > +/* ********************************************** *
> > + * *** main battery charger *** *
> > + * ********************************************** */
> > +
> > +static void axp20x_battery_chg_reconfig(struct power_supply *psy);
> > +
> > +static int axp20x_battery_config(struct platform_device *pdev,
> > + struct axp20x_power *devdata,
> > + struct axp20x_dev *axp20x)
> > +{
> > + struct device_node *np;
> > + int i, ret = 0, reg, new_reg = 0;
> > + u32 ocv[16], temp[3], rdc, capa;
> > +
> > + ret = regmap_read(axp20x->regmap, AXP20X_PWR_OP_MODE, ®);
> > + if (ret)
> > + return ret;
> > +
> > + np = of_node_get(axp20x->dev->of_node);
> > + if (!np)
> > + return -ENODEV;
> > +
> > + ret = of_property_read_u32_array(np, "battery.ocv", ocv, 16);
> > + for (i = 0; ret == 0 && i < ARRAY_SIZE(ocv); i++)
> > + if (ocv[i] > 100) {
> > + dev_warn(&pdev->dev, "OCV[%d] %u > 100\n", i, ocv[i]);
> > + ret = -EINVAL;
> > + goto err;
> > + }
> > +
> > + ret = of_property_read_u32_array(np, "battery.resistance", &rdc, 1);
> > + if (ret != 0)
> > + rdc = 100;
> > +
> > + ret = of_property_read_u32_array(np, "battery.capacity", &capa, 1);
> > + if (ret != 0)
> > + capa = 0;
> > +
> > + ret = of_property_read_u32_array(np, "battery.temp_sensor", temp, 3);
> > + if (ret != 0)
> > + memset(temp, 0, sizeof(temp));
> > + else if (temp[0] != 20 && temp[0] != 40 && temp[0] != 60 &&
> > + temp[0] != 80) {
> > + dev_warn(&pdev->dev, "Invalid battery temperature sensor current setting\n");
> > + ret = -EINVAL;
> > + memset(temp, 0, sizeof(temp));
> > + }
> > +
> > + dev_info(&pdev->dev, "FDT settings: capacity=%d, resistance=%d, temp_sensor=<%d %d %d>\n", capa, rdc, temp[0], temp[1], temp[2]);
> > + /* apply settings */
> > + devdata->batt_health = POWER_SUPPLY_HEALTH_UNKNOWN;
> > + regmap_update_bits(axp20x->regmap, AXP20X_FG_RES, AXP20X_FG_ENABLE, 0x00);
> > + regmap_update_bits(axp20x->regmap, AXP20X_RDC_H, 0x80, 0x00);
> > + regmap_update_bits(axp20x->regmap, AXP20X_RDC_L, 0xff, (rdc * 10000 + 5371) / 10742);
> > + regmap_update_bits(axp20x->regmap, AXP20X_RDC_H, 0x1f, ((rdc * 10000 + 5371) / 10742) >> 8);
> > + if (of_find_property(np, "battery.ocv", NULL))
> > + for (i = 0; i < ARRAY_SIZE(ocv); i++) {
> > + ret = regmap_update_bits(axp20x->regmap, AXP20X_OCV(i),
> > + 0xff, ocv[i]);
> > + if (ret)
> > + dev_warn(&pdev->dev,
> > + "Failed to store OCV[%d] setting: %d\n",
> > + i, ret);
> > + }
> > + regmap_update_bits(axp20x->regmap, AXP20X_FG_RES, AXP20X_FG_ENABLE, AXP20X_FG_ENABLE);
> > +
> > + if (capa == 0 && !(reg & AXP20X_PWR_OP_BATT_PRESENT)) {
> > + /* No battery present or configured -> disable */
> > + regmap_update_bits(axp20x->regmap, AXP20X_CHRG_CTRL1, AXP20X_CHRG_CTRL1_ENABLE, 0x00);
> > + regmap_update_bits(axp20x->regmap, AXP20X_OFF_CTRL, AXP20X_OFF_CTRL_BATT_MON, 0x00);
> > + dev_info(&pdev->dev, "No battery, disabling charger\n");
> > + ret = -ENODEV;
> > + goto err;
> > + }
> > +
> > + if (temp[0] == 0) {
> > + regmap_update_bits(axp20x->regmap, AXP20X_ADC_RATE,
> > + AXP20X_ADR_TS_WHEN_MASK |
> > + AXP20X_ADR_TS_UNRELATED,
> > + AXP20X_ADR_TS_UNRELATED |
> > + AXP20X_ADR_TS_WHEN_OFF);
> > + } else {
> > + devdata->tbatt_min = temp[1];
> > + devdata->tbatt_max = temp[2];
> > + switch (temp[0]) {
> > + case 20:
> > + regmap_update_bits(axp20x->regmap, AXP20X_ADC_RATE,
> > + AXP20X_ADR_TS_CURR_MASK |
> > + AXP20X_ADR_TS_WHEN_MASK |
> > + AXP20X_ADR_TS_UNRELATED,
> > + AXP20X_ADR_TS_CURR_20uA |
> > + AXP20X_ADR_TS_WHEN_ADC);
> > + break;
> > + case 40:
> > + regmap_update_bits(axp20x->regmap, AXP20X_ADC_RATE,
> > + AXP20X_ADR_TS_CURR_MASK |
> > + AXP20X_ADR_TS_WHEN_MASK |
> > + AXP20X_ADR_TS_UNRELATED,
> > + AXP20X_ADR_TS_CURR_40uA |
> > + AXP20X_ADR_TS_WHEN_ADC);
> > + break;
> > + case 60:
> > + regmap_update_bits(axp20x->regmap, AXP20X_ADC_RATE,
> > + AXP20X_ADR_TS_CURR_MASK |
> > + AXP20X_ADR_TS_WHEN_MASK |
> > + AXP20X_ADR_TS_UNRELATED,
> > + AXP20X_ADR_TS_CURR_60uA |
> > + AXP20X_ADR_TS_WHEN_ADC);
> > + break;
> > + case 80:
> > + regmap_update_bits(axp20x->regmap, AXP20X_ADC_RATE,
> > + AXP20X_ADR_TS_CURR_MASK |
> > + AXP20X_ADR_TS_WHEN_MASK |
> > + AXP20X_ADR_TS_UNRELATED,
> > + AXP20X_ADR_TS_CURR_80uA |
> > + AXP20X_ADR_TS_WHEN_ADC);
> > + break;
> > + }
> > + new_reg = temp[1] / (0x10 * 800);
> > + regmap_update_bits(axp20x->regmap, AXP20X_V_HTF_CHRG, 0xff,
> > + new_reg);
> > + regmap_update_bits(axp20x->regmap, AXP20X_V_HTF_DISCHRG, 0xff,
> > + new_reg);
> > + new_reg = temp[2] / (0x10 * 800);
> > + regmap_update_bits(axp20x->regmap, AXP20X_V_LTF_CHRG, 0xff,
> > + new_reg);
> > + regmap_update_bits(axp20x->regmap, AXP20X_V_LTF_DISCHRG, 0xff,
> > + new_reg);
> > + }
> > + devdata->batt_capacity = capa * 1000;
> > + devdata->batt_user_imax = (capa < 300 ? 300 : capa) * 1000;
> > + /* Prefer longer battery life over longer runtime. */
> > + regmap_update_bits(devdata->axp20x->regmap, AXP20X_CHRG_CTRL1,
> > + AXP20X_CHRG_CTRL1_TGT_VOLT,
> > + AXP20X_CHRG_CTRL1_TGT_4_15V);
> > +
> > + /* TODO: configure CHGLED? */
> > +
> > + /* Default to about 5% capacity, about 3.5V */
> > + regmap_update_bits(axp20x->regmap, AXP20X_APS_WARN_L1, 0xff,
> > + (3500000 - 2867200) / 4 / 1400);
> > + regmap_update_bits(axp20x->regmap, AXP20X_APS_WARN_L2, 0xff,
> > + (3304000 - 2867200) / 4 / 1400);
> > + /* RDC - disable capacity monitor, reconfigure, re-enable */
> > + regmap_update_bits(axp20x->regmap, AXP20X_FG_RES, 0x80, 0x80);
> > + regmap_update_bits(axp20x->regmap, AXP20X_RDC_H, 0x80, 0x00);
> > + regmap_update_bits(axp20x->regmap, AXP20X_RDC_H, 0x1f, ((rdc * 10000 + 5371) / 10742) >> 8);
> > + regmap_update_bits(axp20x->regmap, AXP20X_RDC_L, 0xff, (rdc * 10000 + 5371) / 10742);
> > + regmap_update_bits(axp20x->regmap, AXP20X_FG_RES, 0x80, 0x00);
> > + regmap_update_bits(axp20x->regmap, AXP20X_OFF_CTRL, AXP20X_OFF_CTRL_BATT_MON, AXP20X_OFF_CTRL_BATT_MON);
> > + axp20x_battery_chg_reconfig(&devdata->battery);
> > + ret = 0;
> > +
> > +err:
> > + of_node_put(np);
> > + return ret;
> > +}
> > +
> > +static int axp20x_battery_uv_to_temp(struct axp20x_power *devdata, int uv)
> > +{
> > + /* TODO: convert µV to °C */
> > + return uv;
> > +}
> > +
> > +static int axp20x_battery_get_prop(struct power_supply *psy,
> > + enum power_supply_property psp,
> > + union power_supply_propval *val)
> > +{
> > + struct axp20x_power *devdata = dev_get_drvdata(psy->dev->parent);
> > + int ret, reg;
> > +
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_CURRENT_MAX:
> > + ret = regmap_read(devdata->axp20x->regmap, AXP20X_CHRG_CTRL1,
> > + ®);
> > + if (ret)
> > + return ret;
> > + val->intval = (reg & AXP20X_CHRG_CTRL1_TGT_CURR) * 100000 +
> > + 300000;
> > + return 0;
> > +
> > + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
> > + ret = regmap_read(devdata->axp20x->regmap, AXP20X_CHRG_CTRL1,
> > + ®);
> > + if (ret)
> > + return ret;
> > + switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
> > + case AXP20X_CHRG_CTRL1_TGT_4_1V:
> > + val->intval = 4100000;
> > + break;
> > + case AXP20X_CHRG_CTRL1_TGT_4_15V:
> > + val->intval = 4150000;
> > + break;
> > + case AXP20X_CHRG_CTRL1_TGT_4_2V:
> > + val->intval = 4200000;
> > + break;
> > + case AXP20X_CHRG_CTRL1_TGT_4_36V:
> > + val->intval = 4360000;
> > + break;
> > + default:
> > + ret = -EINVAL;
> > + }
> > + return 0;
> > +
> > + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
> > + ret = regmap_read(devdata->axp20x->regmap, AXP20X_APS_WARN_L2,
> > + ®);
> > + if (ret)
> > + return ret;
> > + val->intval = 2867200 + 1400 * reg * 4;
> > + return 0;
> > +
> > + case POWER_SUPPLY_PROP_TECHNOLOGY:
> > + val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
> > + return 0;
> > +
> > + default:
> > + break;
> > + }
> > +
> > + ret = axp20x_power_poll(devdata, 0);
> > + if (ret)
> > + return ret;
> > +
> > + spin_lock(&devdata->lock);
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_PRESENT:
> > + case POWER_SUPPLY_PROP_ONLINE:
> > + val->intval = !!(devdata->status2 & AXP20X_PWR_OP_BATT_PRESENT);
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_STATUS:
> > + if (devdata->status1 & AXP20X_PWR_STATUS_BAT_CHARGING)
> > + val->intval = POWER_SUPPLY_STATUS_CHARGING;
> > + else if (devdata->ibatt == 0 && devdata->batt_percent == 100)
> > + val->intval = POWER_SUPPLY_STATUS_FULL;
> > + else if (devdata->ibatt == 0)
> > + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
> > + else
> > + val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_CURRENT_NOW:
> > + val->intval = devdata->ibatt;
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_HEALTH:
> > + val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
> > + // POWER_SUPPLY_HEALTH_GOOD, POWER_SUPPLY_HEALTH_OVERHEAT, POWER_SUPPLY_HEALTH_DEAD, POWER_SUPPLY_HEALTH_OVERVOLTAGE, POWER_SUPPLY_HEALTH_UNSPEC_FAILURE, POWER_SUPPLY_HEALTH_COLD, POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> > + val->intval = devdata->vbatt;
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_POWER_NOW:
> > + val->intval = devdata->pbatt;
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
> > + val->intval = devdata->batt_capacity;
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_CHARGE_NOW:
> > + /* TODO */
> > + val->intval = 12345;
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_CAPACITY:
> > + val->intval = devdata->batt_percent;
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_TEMP:
> > + val->intval = axp20x_battery_uv_to_temp(devdata,
> > + devdata->tbatt);
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_TEMP_ALERT_MIN:
> > + val->intval = axp20x_battery_uv_to_temp(devdata,
> > + devdata->tbatt_min);
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
> > + val->intval = axp20x_battery_uv_to_temp(devdata,
> > + devdata->tbatt_max);
> > + break;
> > +
> > + default:
> > + ret = -EINVAL;
> > + }
> > + spin_unlock(&devdata->lock);
> > +
> > + return ret;
> > +}
> > +
> > +static int axp20x_battery_max_chg_current(struct axp20x_power *devdata)
> > +{
> > + if ((devdata->status1 & AXP20X_PWR_STATUS_AC_PRESENT) &&
> > + (devdata->status1 & AXP20X_PWR_STATUS_AC_AVAILABLE)) {
> > + /* AC available - unrestricted power */
> > + return devdata->batt_capacity / 2;
> > + } else if ((devdata->status1 & AXP20X_PWR_STATUS_VBUS_PRESENT) &&
> > + (devdata->status1 & AXP20X_PWR_STATUS_VBUS_AVAILABLE)) {
> > + /* VBUS available - limited power */
> > + switch (devdata->vbusmgt & AXP20X_VBUS_CLIMIT_MASK) {
> > + case AXP20X_VBUC_CLIMIT_100mA:
> > + return 0;
> > + case AXP20X_VBUC_CLIMIT_500mA:
> > + return 300000;
> > + case AXP20X_VBUC_CLIMIT_900mA:
> > + return 600000;
> > + case AXP20X_VBUC_CLIMIT_NONE:
> > + return devdata->batt_capacity / 2;
> > + default:
> > + return 0;
> > + }
> > + } else {
> > + /* on-battery */
> > + return 0;
> > + }
> > +}
> > +
> > +static int axp20x_battery_set_prop(struct power_supply *psy,
> > + enum power_supply_property psp,
> > + const union power_supply_propval *val)
> > +{
> > + struct axp20x_power *devdata = dev_get_drvdata(psy->dev->parent);
> > + int ret;
> > +
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_STATUS:
> > + if (val->intval == POWER_SUPPLY_STATUS_CHARGING) {
> > + ret = axp20x_battery_max_chg_current(devdata);
> > + if (ret == 0) {
> > + ret = -EBUSY;
> > + break;
> > + }
> > + ret = regmap_update_bits(devdata->axp20x->regmap,
> > + AXP20X_PWR_OP_MODE,
> > + AXP20X_PWR_OP_CHARGING,
> > + AXP20X_PWR_OP_CHARGING);
> > + if (ret == 0)
> > + axp20x_battery_chg_reconfig(&devdata->battery);
> > + } else if (val->intval == POWER_SUPPLY_STATUS_NOT_CHARGING) {
> > + ret = regmap_update_bits(devdata->axp20x->regmap,
> > + AXP20X_PWR_OP_MODE,
> > + AXP20X_PWR_OP_CHARGING, 0);
> > + } else
> > + ret = -EINVAL;
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
> > + /* TODO: adjust AXP20X_APS_WARN_L1 and AXP20X_APS_WARN_L2 accordingly */
> > + ret = -EINVAL;
> > + break;
> > +
> > + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
> > + switch (val->intval) {
> > + case 4100000:
> > + ret = regmap_update_bits(devdata->axp20x->regmap,
> > + AXP20X_CHRG_CTRL1,
> > + AXP20X_CHRG_CTRL1_TGT_VOLT,
> > + AXP20X_CHRG_CTRL1_TGT_4_1V);
> > + break;
> > + case 4150000:
> > + ret = regmap_update_bits(devdata->axp20x->regmap,
> > + AXP20X_CHRG_CTRL1,
> > + AXP20X_CHRG_CTRL1_TGT_VOLT,
> > + AXP20X_CHRG_CTRL1_TGT_4_15V);
> > + break;
> > + case 4200000:
> > + ret = regmap_update_bits(devdata->axp20x->regmap,
> > + AXP20X_CHRG_CTRL1,
> > + AXP20X_CHRG_CTRL1_TGT_VOLT,
> > + AXP20X_CHRG_CTRL1_TGT_4_2V);
> > + break;
> > + case 4360000:
> > + /* refuse this as it's too much for Li-ion! */
> > + default:
> > + ret = -EINVAL;
> > + }
> > + break;
> > + case POWER_SUPPLY_PROP_CURRENT_MAX:
> > + if (((val->intval - 300000) / 100000) > 0x0f)
> > + ret = -EINVAL;
> > + else if (val->intval < 300000)
> > + ret = -EINVAL;
> > + else {
> > + devdata->batt_user_imax = val->intval;
> > + axp20x_battery_chg_reconfig(&devdata->battery);
> > + ret = 0;
> > + }
> > + break;
> > +
> > + default:
> > + ret = -EINVAL;
> > + }
> > + return ret;
> > +}
> > +
> > +static enum power_supply_property axp20x_battery_props[] = {
> > + POWER_SUPPLY_PROP_PRESENT,
> > + POWER_SUPPLY_PROP_ONLINE,
> > + POWER_SUPPLY_PROP_STATUS,
> > + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> > + POWER_SUPPLY_PROP_CURRENT_NOW,
> > + POWER_SUPPLY_PROP_CURRENT_MAX,
> > + POWER_SUPPLY_PROP_HEALTH,
> > + POWER_SUPPLY_PROP_TECHNOLOGY,
> > + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
> > + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
> > + POWER_SUPPLY_PROP_POWER_NOW,
> > + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
> > + /* POWER_SUPPLY_PROP_CHARGE_NOW, */
> > + POWER_SUPPLY_PROP_CAPACITY,
> > + POWER_SUPPLY_PROP_TEMP,
> > + POWER_SUPPLY_PROP_TEMP_ALERT_MIN,
> > + POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
> > +};
> > +
> > +static int axp20x_battery_prop_writeable(struct power_supply *psy,
> > + enum power_supply_property psp)
> > +{
> > + return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN ||
> > + psp == POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN ||
> > + psp == POWER_SUPPLY_PROP_CURRENT_MAX ||
> > + psp == POWER_SUPPLY_PROP_STATUS;
> > +}
> > +
> > +static void axp20x_battery_chg_reconfig(struct power_supply *psy)
> > +{
> > + struct axp20x_power *devdata = container_of(psy,
> > + struct axp20x_power, battery);
> > + int charge_max, ret;
> > +
> > + ret = axp20x_power_poll(devdata, 0);
> > + if (ret)
> > + return;
> > +
> > + charge_max = axp20x_battery_max_chg_current(devdata);
> > +
> > + if (charge_max == 0) {
> > + ret = regmap_update_bits(devdata->axp20x->regmap,
> > + AXP20X_PWR_OP_MODE,
> > + AXP20X_PWR_OP_CHARGING, 0);
> > + } else {
> > + if (devdata->batt_user_imax < charge_max)
> > + charge_max = devdata->batt_user_imax;
> > + if (((charge_max - 300000) / 100000) > 0x0f)
> > + charge_max = 300000 + 0x0f * 100000;
> > + ret = regmap_update_bits(devdata->axp20x->regmap,
> > + AXP20X_CHRG_CTRL1,
> > + AXP20X_CHRG_CTRL1_TGT_CURR,
> > + (charge_max - 300000) / 100000);
> > + ret = regmap_update_bits(devdata->axp20x->regmap,
> > + AXP20X_PWR_OP_MODE,
> > + AXP20X_PWR_OP_CHARGING,
> > + AXP20X_PWR_OP_CHARGING);
> > + }
> > +}
> > +
> > +
> > +
> > +/* ********************************************** *
> > + * *** IRQ handlers *** *
> > + * ********************************************** */
> > +
> > +static irqreturn_t axp20x_irq_ac_over_v(int irq, void *pwr)
> > +{
> > + struct platform_device *pdev = pwr;
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + dev_warn(&pdev->dev, "IRQ#%d AC over voltage\n", irq);
> > + schedule_work(&devdata->work);
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t axp20x_irq_ac_plugin(int irq, void *pwr)
> > +{
> > + struct platform_device *pdev = pwr;
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + dev_info(&pdev->dev, "IRQ#%d AC connected\n", irq);
> > + schedule_work(&devdata->work);
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t axp20x_irq_ac_removal(int irq, void *pwr)
> > +{
> > + struct platform_device *pdev = pwr;
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + dev_info(&pdev->dev, "IRQ#%d AC disconnected\n", irq);
> > + schedule_work(&devdata->work);
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t axp20x_irq_vbus_over_v(int irq, void *pwr)
> > +{
> > + struct platform_device *pdev = pwr;
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + dev_warn(&pdev->dev, "IRQ#%d VBUS over voltage\n", irq);
> > + schedule_work(&devdata->work);
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t axp20x_irq_vbus_plugin(int irq, void *pwr)
> > +{
> > + struct platform_device *pdev = pwr;
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + dev_info(&pdev->dev, "IRQ#%d VBUS connected\n", irq);
> > + schedule_work(&devdata->work);
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t axp20x_irq_vbus_removal(int irq, void *pwr)
> > +{
> > + struct platform_device *pdev = pwr;
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + dev_info(&pdev->dev, "IRQ#%d VBUS disconnected\n", irq);
> > + schedule_work(&devdata->work);
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t axp20x_irq_vbus_v_low(int irq, void *pwr)
> > +{
> > + struct platform_device *pdev = pwr;
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + dev_warn(&pdev->dev, "IRQ#%d VBUS low voltage\n", irq);
> > + schedule_work(&devdata->work);
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t axp20x_irq_batt_plugin(int irq, void *pwr)
> > +{
> > + struct platform_device *pdev = pwr;
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + dev_info(&pdev->dev, "IRQ#%d Battery connected\n", irq);
> > + schedule_work(&devdata->work);
> > + return IRQ_HANDLED;
> > +}
> > +static irqreturn_t axp20x_irq_batt_removal(int irq, void *pwr)
> > +{
> > + struct platform_device *pdev = pwr;
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + dev_info(&pdev->dev, "IRQ#%d Battery disconnected\n", irq);
> > + schedule_work(&devdata->work);
> > + return IRQ_HANDLED;
> > +}
> > +static irqreturn_t axp20x_irq_batt_activation(int irq, void *pwr)
> > +{
> > + struct platform_device *pdev = pwr;
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + dev_info(&pdev->dev, "IRQ#%d Battery activation started\n", irq);
> > + schedule_work(&devdata->work);
> > + return IRQ_HANDLED;
> > +}
> > +static irqreturn_t axp20x_irq_batt_activated(int irq, void *pwr)
> > +{
> > + struct platform_device *pdev = pwr;
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + dev_info(&pdev->dev, "IRQ#%d Battery activation completed\n", irq);
> > + schedule_work(&devdata->work);
> > + return IRQ_HANDLED;
> > +}
> > +static irqreturn_t axp20x_irq_batt_charging(int irq, void *pwr)
> > +{
> > + struct platform_device *pdev = pwr;
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + dev_info(&pdev->dev, "IRQ#%d Battery charging\n", irq);
> > + schedule_work(&devdata->work);
> > + return IRQ_HANDLED;
> > +}
> > +static irqreturn_t axp20x_irq_batt_charged(int irq, void *pwr)
> > +{
> > + struct platform_device *pdev = pwr;
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + dev_info(&pdev->dev, "IRQ#%d Battery charged\n", irq);
> > + schedule_work(&devdata->work);
> > + return IRQ_HANDLED;
> > +}
> > +static irqreturn_t axp20x_irq_batt_high_temp(int irq, void *pwr)
> > +{
> > + struct platform_device *pdev = pwr;
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + dev_warn(&pdev->dev, "IRQ#%d Battery temperature high\n", irq);
> > + schedule_work(&devdata->work);
> > + return IRQ_HANDLED;
> > +}
> > +static irqreturn_t axp20x_irq_batt_low_temp(int irq, void *pwr)
> > +{
> > + struct platform_device *pdev = pwr;
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + dev_warn(&pdev->dev, "IRQ#%d Battery temperature low\n", irq);
> > + schedule_work(&devdata->work);
> > + return IRQ_HANDLED;
> > +}
> > +static irqreturn_t axp20x_irq_batt_chg_curr_low(int irq, void *pwr)
> > +{
> > + struct platform_device *pdev = pwr;
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + dev_warn(&pdev->dev, "IRQ#%d External power too weak for target charging current!\n", irq);
> > + schedule_work(&devdata->work);
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static irqreturn_t axp20x_irq_power_low(int irq, void *pwr)
> > +{
> > + struct platform_device *pdev = pwr;
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + dev_warn(&pdev->dev, "IRQ#%d System power running out soon\n", irq);
> > + schedule_work(&devdata->work);
> > + return IRQ_HANDLED;
> > +}
> > +static irqreturn_t axp20x_irq_power_low_crit(int irq, void *pwr)
> > +{
> > + struct platform_device *pdev = pwr;
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + dev_crit(&pdev->dev, "IRQ#%d System power running out now!\n", irq);
> > + schedule_work(&devdata->work);
> > + return IRQ_HANDLED;
> > +}
> > +
> > +/* ********************************************** *
> > + * *** Platform driver code *** *
> > + * ********************************************** */
> > +
> > +static int axp20x_init_irq(struct platform_device *pdev,
> > + struct axp20x_dev *axp20x, const char *irq_name,
> > + const char *dev_name, irq_handler_t handler)
> > +{
> > + int irq = platform_get_irq_byname(pdev, irq_name);
> > + int ret;
> > +
> > + if (irq < 0) {
> > + dev_warn(&pdev->dev, "No IRQ for %s: %d\n", irq_name, irq);
> > + return irq;
> > + }
> > + irq = regmap_irq_get_virq(axp20x->regmap_irqc, irq);
> > +
> > + ret = devm_request_any_context_irq(&pdev->dev, irq, handler, 0,
> > + dev_name, pdev);
> > + if (ret < 0)
> > + dev_warn(&pdev->dev, "Failed to request %s IRQ#%d: %d\n", irq_name, irq, ret);
> > + return ret;
> > +}
> > +
> > +static int axp20x_power_suspend(struct platform_device *pdev, pm_message_t state)
> > +{
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + cancel_work_sync(&devdata->work);
> > + return 0;
> > +}
> > +
> > +static int axp20x_power_resume(struct platform_device *pdev)
> > +{
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + axp20x_power_poll(devdata, 1);
> > + return 0;
> > +}
> > +
> > +static void axp20x_power_shutdown(struct platform_device *pdev)
> > +{
> > + struct axp20x_power *devdata = platform_get_drvdata(pdev);
> > +
> > + cancel_work_sync(&devdata->work);
> > +}
> > +
> > +static int axp20x_power_probe(struct platform_device *pdev)
> > +{
> > + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
> > + struct axp20x_power *devdata;
> > + struct power_supply *ac, *vbus, *backup, *battery;
> > + int ret;
> > +
> > + devdata = devm_kzalloc(&pdev->dev, sizeof(struct axp20x_power),
> > + GFP_KERNEL);
> > + if (devdata == NULL)
> > + return -ENOMEM;
> > +
> > + spin_lock_init(&devdata->lock);
> > + devdata->axp20x = axp20x;
> > + platform_set_drvdata(pdev, devdata);
> > +
> > + backup = &devdata->backup;
> > + snprintf(devdata->backup_name, sizeof(devdata->backup_name), "axp20x-backup");
> > + backup->name = devdata->backup_name;
> > + backup->type = POWER_SUPPLY_TYPE_BATTERY;
> > + backup->properties = axp20x_backup_props;
> > + backup->num_properties = ARRAY_SIZE(axp20x_backup_props);
> > + backup->property_is_writeable = axp20x_backup_prop_writeable;
> > + backup->get_property = axp20x_backup_get_prop;
> > + backup->set_property = axp20x_backup_set_prop;
> > +
> > + ac = &devdata->ac;
> > + snprintf(devdata->ac_name, sizeof(devdata->ac_name), "axp20x-ac");
> > + ac->name = devdata->ac_name;
> > + ac->type = POWER_SUPPLY_TYPE_MAINS;
> > + ac->properties = axp20x_ac_props;
> > + ac->num_properties = ARRAY_SIZE(axp20x_ac_props);
> > + ac->get_property = axp20x_ac_get_prop;
> > +
> > + vbus = &devdata->vbus;
> > + snprintf(devdata->vbus_name, sizeof(devdata->vbus_name), "axp20x-usb");
> > + vbus->name = devdata->vbus_name;
> > + vbus->type = POWER_SUPPLY_TYPE_USB;
> > + vbus->properties = axp20x_vbus_props;
> > + vbus->num_properties = ARRAY_SIZE(axp20x_vbus_props);
> > + vbus->property_is_writeable = axp20x_vbus_prop_writeable;
> > + vbus->get_property = axp20x_vbus_get_prop;
> > + vbus->set_property = axp20x_vbus_set_prop;
> > +
> > + devdata->battery_supplies[0] = devdata->vbus_name;
> > + devdata->battery_supplies[1] = devdata->ac_name;
> > + battery = &devdata->battery;
> > + snprintf(devdata->battery_name, sizeof(devdata->battery_name), "axp20x-battery");
> > + battery->name = devdata->battery_name;
> > + battery->type = POWER_SUPPLY_TYPE_BATTERY;
> > + battery->properties = axp20x_battery_props;
> > + battery->num_properties = ARRAY_SIZE(axp20x_battery_props);
> > + battery->property_is_writeable = axp20x_battery_prop_writeable;
> > + battery->get_property = axp20x_battery_get_prop;
> > + battery->set_property = axp20x_battery_set_prop;
> > + battery->supplied_from = devdata->battery_supplies;
> > + battery->num_supplies = 1;
> > + battery->external_power_changed = axp20x_battery_chg_reconfig;
> > +
> > + /* configure hardware and check FDT params */
> > + regmap_update_bits(axp20x->regmap, AXP20X_ADC_RATE,
> > + AXP20X_ADR_RATE_MASK, AXP20X_ADR_RATE_50Hz);
> > +
> > + ret = axp20x_backup_config(pdev, axp20x);
> > + if (ret)
> > + devdata->backup_name[0] = '\0';
> > +
> > + ret = axp20x_battery_config(pdev, devdata, axp20x);
> > + if (ret)
> > + devdata->battery_name[0] = '\0';
> > + else if (devdata->tbatt_min == 0 && devdata->tbatt_max == 0)
> > + battery->num_properties -= 3;
> > +
> > + ret = axp20x_power_poll(devdata, 2);
> > + if (ret)
> > + return ret;
> > +
> > + if (devdata->status1 & AXP20X_PWR_STATUS_AC_VBUS_SHORT)
> > + devdata->ac_name[0] = '\0';
> > + else
> > + battery->num_supplies = 2;
> > +
> > + /* register present supplies */
> > + ret = power_supply_register(&pdev->dev, backup);
> > + if (ret)
> > + return ret;
> > +
> > + ret = power_supply_register(&pdev->dev, vbus);
> > + if (ret)
> > + goto err_unreg_backup;
> > + power_supply_changed(&devdata->vbus);
> > +
> > + if (devdata->ac_name[0]) {
> > + ret = power_supply_register(&pdev->dev, ac);
> > + if (ret)
> > + goto err_unreg_vbus;
> > + power_supply_changed(&devdata->ac);
> > + }
> > +
> > + if (devdata->battery_name[0]) {
> > + ret = power_supply_register(&pdev->dev, battery);
> > + if (ret)
> > + goto err_unreg_ac;
> > + power_supply_changed(&devdata->battery);
> > + }
>
> It looks like there's a lot more than just one driver here. Would it
> make sense to split this into smaller drivers?
There are 4 parts - AC, VBUS, backup/RTC battery and main battery.
Splitting it into four parts would be possible though there are some
interactions between them:
- AC and VBUS/OTG need to trigger charge current reconfiguration for
battery charger (due to current supply limit on VBUS/OTG)
In addition, some of supply information is presented in registers shared
with the other supplies which would make caching management harder
unless regmap caching could be controlled in a better way.
> Thanks,
> Maxime
Thanks,
Bruno
More information about the linux-arm-kernel
mailing list