[PATCH v3 6/6] ARM: dts: rockchip: add intmem node for rk3288 smp support

Heiko Stübner heiko at sntech.de
Sat Oct 11 11:01:01 PDT 2014


Am Freitag, 10. Oktober 2014, 14:26:10 schrieb Kever Yang:
> This patch add intmem node des which is needed by platsmp.c
> 
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>

again without this Signed-off please (also true for patch 5/6 where I forgot to 
mention it)

> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
> ---
> 
> Changes in v3:
> - remove 'enable-method' from this patch
> - add compitable name "rockchip,rk3288-pmu-sram" for pmu-intmem
> 
> Changes in v2:
> - adjust the alignment
> 
>  arch/arm/boot/dts/rk3288.dtsi | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 44108fe..5e9c56d 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -441,6 +441,23 @@
>  		status = "disabled";
>  	};
> 
> +	bus_intmem at ff700000 {
> +		compatible = "mmio-sram";
> +		reg = <0xff700000 0x18000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0 0xff700000 0x18000>;
> +		smp-sram at 0 {
> +			compatible = "rockchip,rk3066-smp-sram";
> +			reg = <0x00 0x10>;
> +		};
> +	};
> +
> +	pmu_intmem at ff720000 {
> +		compatible = "mmio-sram", "rockchip,rk3288-pmu-sram";

general rule, the more specific compatible should be in front, so
		compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";

This way, if there is a driver for "rockchip,rk3288-pmu-sram" at some point in 
the future, it will grab the node before the more generic sram driver does.

But in general, what is the pmu sram necessary for, as no part of this series 
uses it?

> +		reg = <0xff720000 0x4000>;
> +	};
> +
>  	pmu: power-management at ff730000 {
>  		compatible = "rockchip,rk3066-pmu", "syscon";
>  		reg = <0xff730000 0x100>;




More information about the linux-arm-kernel mailing list