[PATCH v4 1/1] ARM: at91/dt: sam9x5: Add CAN device nodes

[Nicolas Ferre]

On 07/10/2014 13:51, Alexander Stein :
> Add the missing CAN devices node including their pin muxing to the shared
> .dtsi for at91sam9x5. Actually include this file.
> While at it, fix white spaces of can1_clk.

Well, no: I split the patch in two to separate these whitespace
modifications and the addition of nodes. But now worries, I did it and
stacked the 2 patches on top of my WIP at91-3.19-dt branch.

(FYI, the additional patch is named (ARM: at91/dt/trivial:
at91sam9x5_can.dtsi: comment and whitespace fixes))

I also added the Acked-by from Alexandre Belloni as he added it in a
previous version and confirmed it on IRC for this v4.

Thanks for your help Alexander. Bye,


> Signed-off-by: Alexander Stein <alexander.stein at systec-electronic.com>
> ---
> Changes in v4:
> * Move can related descriptions to at91sam9x5_can.dtsi
> * Actually include this file in at91sam9x[23]5.dtsi
> 
>  arch/arm/boot/dts/at91sam9x25.dtsi    |  1 +
>  arch/arm/boot/dts/at91sam9x35.dtsi    |  1 +
>  arch/arm/boot/dts/at91sam9x5_can.dtsi | 48 ++++++++++++++++++++++++++++++++---
>  3 files changed, 46 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
> index c255421..3c5fa33 100644
> --- a/arch/arm/boot/dts/at91sam9x25.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x25.dtsi
> @@ -10,6 +10,7 @@
>  #include "at91sam9x5_usart3.dtsi"
>  #include "at91sam9x5_macb0.dtsi"
>  #include "at91sam9x5_macb1.dtsi"
> +#include "at91sam9x5_can.dtsi"
>  
>  / {
>  	model = "Atmel AT91SAM9X25 SoC";
> diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
> index 8eac66c..499cdc8 100644
> --- a/arch/arm/boot/dts/at91sam9x35.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x35.dtsi
> @@ -8,6 +8,7 @@
>  
>  #include "at91sam9x5.dtsi"
>  #include "at91sam9x5_macb0.dtsi"
> +#include "at91sam9x5_can.dtsi"
>  
>  / {
>  	model = "Atmel AT91SAM9X35 SoC";
> diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi
> index f44ab77..3579232 100644
> --- a/arch/arm/boot/dts/at91sam9x5_can.dtsi
> +++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi
> @@ -20,10 +20,50 @@
>  						reg = <29>;
>  					};
>  
> -                                        can1_clk: can1_clk {
> -                                                #clock-cells = <0>;
> -                                                reg = <30>;
> -                                        };
> +					can1_clk: can1_clk {
> +						#clock-cells = <0>;
> +						reg = <30>;
> +					};
> +				};
> +			};
> +
> +			can0: can at f8000000 {
> +				compatible = "atmel,at91sam9x5-can";
> +				reg = <0xf8000000 0x300>;
> +				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&pinctrl_can0_rx_tx>;
> +				clocks = <&can0_clk>;
> +				clock-names = "can_clk";
> +				status = "disabled";
> +			};
> +
> +			can1: can at f8004000 {
> +				compatible = "atmel,at91sam9x5-can";
> +				reg = <0xf8004000 0x300>;
> +				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&pinctrl_can1_rx_tx>;
> +				clocks = <&can1_clk>;
> +				clock-names = "can_clk";
> +				status = "disabled";
> +			};
> +
> +			pinctrl at fffff400 {
> +				can0 {
> +					pinctrl_can0_rx_tx: can0_rx_tx {
> +						atmel,pins =
> +							<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0, conflicts with DRXD */
> +							AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX0, conflicts with DTXD */
> +					};
> +				};
> +
> +				can1 {
> +					pinctrl_can1_rx_tx: can1_rx_tx {
> +						atmel,pins =
> +							<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1, conflicts with RXD1 */
> +							AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* CANTX1, conflicts with TXD1 */
> +					};
>  				};
>  			};
>  		};
> 


-- 
Nicolas Ferre