December 2016 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Thu Dec 1 01:13:30 PST 2016
Ending: Fri Dec 30 07:56:53 PST 2016
Messages: 135

• Client station sends probes on DFS channels   Jean-Pierre Tosoni
  • Client station sends probes on DFS channels   Adrian Chadd
    • TR: Client station sends probes on DFS channels   Jean-Pierre Tosoni
• ath10k: Fix soft lockup during firmware crash/hw-restart   Valo, Kalle
• [PATCH v2] ath10k: Fix soft lockup during firmware crash/hw-restart   Valo, Kalle
  • [PATCH v2] ath10k: Fix soft lockup during firmware crash/hw-restart   Mohammed Shafi Shajakhan
• ath10k: fix TLV set regdomain command   Kalle Valo
• [v2] ath10k: Fix soft lockup during firmware crash/hw-restart   Kalle Valo
• ath10k: Fix Tx DMA alloc failure during continuous wifi down/up   Kalle Valo
• ath10k: wmi-alloc-chunk should use DMA_BIDIRECTIONAL.   Kalle Valo
  • ath10k: wmi-alloc-chunk should use DMA_BIDIRECTIONAL.   Valo, Kalle
• [PATCH 1/3] ath10k: Ensure there are no stale ar->txqs entries.   Ben Greear
  • [PATCH 1/3] ath10k: Ensure there are no stale ar->txqs entries.   Ben Greear
    • [PATCH 1/3] ath10k: Ensure there are no stale ar->txqs entries.   Michal Kazior
      • [PATCH 1/3] ath10k: Ensure there are no stale ar->txqs entries.   Ben Greear
• ath10k crash due to funky-ness in mac80211 restart logic.   Ben Greear
• [PATCH 1/2] mac80211: do not iterate active interfaces when in re-configure   greearb at candelatech.com
  • [PATCH 2/2] ath10k: work-around for stale txq in ar->txqs   greearb at candelatech.com
  • [PATCH 1/2] mac80211: do not iterate active interfaces when in re-configure   Michal Kazior
    • [PATCH 1/2] mac80211: do not iterate active interfaces when in re-configure   Johannes Berg
      • [PATCH 1/2] mac80211: do not iterate active interfaces when in re-configure   Ben Greear
      • [PATCH 1/2] mac80211: do not iterate active interfaces when in re-configure   Johannes Berg
      • [PATCH 1/2] mac80211: do not iterate active interfaces when in re-configure   Ben Greear
      • [PATCH 1/2] mac80211: do not iterate active interfaces when in re-configure   Adrian Chadd
• ath10k firmware crashes in mesh mode on QCA9880   Benjamin Morgan
  • ath10k firmware crashes in mesh mode on QCA9880   Mohammed Shafi Shajakhan
    • ath10k firmware crashes in mesh mode on QCA9880   Mohammed Shafi Shajakhan
      • ath10k firmware crashes in mesh mode on QCA9880   Benjamin Morgan
      • ath10k firmware crashes in mesh mode on QCA9880   Nagarajan, Ashok Raj
      • ath10k firmware crashes in mesh mode on QCA9880   Benjamin Morgan
      • ath10k firmware crashes in mesh mode on QCA9880   Benjamin Morgan
      • ath10k firmware crashes in mesh mode on QCA9880   Benjamin Morgan
      • ath10k firmware crashes in mesh mode on QCA9880   Manoharan, Rajkumar
      • ath10k firmware crashes in mesh mode on QCA9880   Alexis Green
      • ath10k firmware crashes in mesh mode on QCA9880   Adrian Chadd
      • ath10k firmware crashes in mesh mode on QCA9880   Alexis Green
      • ath10k firmware crashes in mesh mode on QCA9880   Adrian Chadd
• [BUG] Kernel crashes with ath10k radio and Nexus 5X clients   Timo Sigurdsson
• [PATCH 1/4] cfg80211: Add support to enable or disable btcoex   Johannes Berg
  • [PATCH 1/4] cfg80211: Add support to enable or disable btcoex   Tamizh chelvam
• [PATCH 2/4] cfg80211: Add new NL80211_CMD_SET_BTCOEX_PRIORITY to support BTCOEX   Johannes Berg
  • [PATCH 2/4] cfg80211: Add new NL80211_CMD_SET_BTCOEX_PRIORITY to support BTCOEX   Tamizh chelvam
    • [PATCH 2/4] cfg80211: Add new NL80211_CMD_SET_BTCOEX_PRIORITY to support BTCOEX   Johannes Berg
      • [PATCH 2/4] cfg80211: Add new NL80211_CMD_SET_BTCOEX_PRIORITY to support BTCOEX   Tamizh chelvam
      • [PATCH 2/4] cfg80211: Add new NL80211_CMD_SET_BTCOEX_PRIORITY to support BTCOEX   Johannes Berg
      • [PATCH 2/4] cfg80211: Add new NL80211_CMD_SET_BTCOEX_PRIORITY to support BTCOEX   Tamizh chelvam
• [PATCH] ath10k: free host-mem with DMA_BIRECTIONAL flag.   greearb at candelatech.com
  • [PATCH] ath10k: free host-mem with DMA_BIRECTIONAL flag.   Valo, Kalle
  • ath10k: free host-mem with DMA_BIRECTIONAL flag.   Kalle Valo
• [PATCH 1/2] ath10k: add accounting for the extended peer statistics   Christian Lamparter
  • [PATCH 1/2] ath10k: add accounting for the extended peer statistics   Mohammed Shafi Shajakhan
    • [PATCH 1/2] ath10k: add accounting for the extended peer statistics   Christian Lamparter
      • [PATCH 1/2] ath10k: add accounting for the extended peer statistics   Mohammed Shafi Shajakhan
      • [PATCH 1/2] ath10k: add accounting for the extended peer statistics   Christian Lamparter
      • [PATCH 1/2] ath10k: add accounting for the extended peer statistics   Mohammed Shafi Shajakhan
      • [PATCH 1/2] ath10k: add accounting for the extended peer statistics   Mohammed Shafi Shajakhan
      • [PATCH 1/2] ath10k: add accounting for the extended peer statistics   Christian Lamparter
      • [PATCH 1/2] ath10k: add accounting for the extended peer statistics   Mohammed Shafi Shajakhan
      • [PATCH] ath10k: merge extended peer info data with existing peers info   Christian Lamparter
      • [PATCH] ath10k: merge extended peer info data with existing peers info   Mohammed Shafi Shajakhan
      • [PATCH] ath10k: merge extended peer info data with existing peers info   Mohammed Shafi Shajakhan
      • [PATCH] ath10k: merge extended peer info data with existing peers info   Christian Lamparter
      • [PATCH] ath10k: merge extended peer info data with existing peers info   Mohammed Shafi Shajakhan
      • [PATCH] ath10k: merge extended peer info data with existing peers info   Christian Lamparter
      • [PATCH] ath10k: merge extended peer info data with existing peers info   Mohammed Shafi Shajakhan
  • [1/2] ath10k: add accounting for the extended peer statistics   Kalle Valo
    • [1/2] ath10k: add accounting for the extended peer statistics   Christian Lamparter
      • [1/2] ath10k: add accounting for the extended peer statistics   Valo, Kalle
• [PATCH 2/2] ath10k: fix potential memory leak in ath10k_wmi_tlv_op_pull_fw_stats()   Christian Lamparter
  • [2/2] ath10k: fix potential memory leak in ath10k_wmi_tlv_op_pull_fw_stats()   Kalle Valo
• ath10k firmware sends probes on DFS channels without radar detection   Jean-Pierre Tosoni
  • ath10k firmware sends probes on DFS channels without radar detection   Ben Greear
    • ath10k firmware sends probes on DFS channels without radar detection   Jean-Pierre Tosoni
    • ath10k firmware sends probes on DFS channels without radar detection   Ben Greear
  • ath10k firmware sends probes on DFS channels without radar detection   Jouni Malinen
    • ath10k firmware sends probes on DFS channels without radar detection   Jean-Pierre Tosoni
      • ath10k firmware sends probes on DFS channels without radar detection   Ben Greear
      • ath10k firmware sends probes on DFS channels without radar detection   Jean-Pierre Tosoni
      • ath10k firmware sends probes on DFS channels without radar detection   Jouni Malinen
      • ath10k firmware sends probes on DFS channels without radar detection   Jean-Pierre Tosoni
• [PATCH] ath10k: Avoid potential page alloc BUG_ON in tx free path   Mohammed Shafi Shajakhan
  • ath10k: Avoid potential page alloc BUG_ON in tx free path   Kalle Valo
• boot kernel panic with QCA6174 and kernel 4.8   Alexandre Maloteaux
  • boot kernel panic with QCA6174 and kernel 4.8   Mohammed Shafi Shajakhan
    • boot kernel panic with QCA6174 and kernel 4.8   Mohammed Shafi Shajakhan
      • boot kernel panic with QCA6174 and kernel 4.8   Alexandre Maloteaux
• ath10k qca988x: hostapd does not start properly   Zoilo Gomez
• [PATCH 1/5] ath10k: fix IRAM banks number for QCA9377   Bartosz Markowski
  • [PATCH 2/5] ath10k: override CE5 config for QCA9377   Bartosz Markowski
  • [PATCH 3/5] ath10k: decrease num of peers support   Bartosz Markowski
  • [PATCH 4/5] ath10k: set CTS protection VDEV param only if VDEV is up   Bartosz Markowski
  • [PATCH 5/5] ath10k: add debug trace to rts/cts set function   Bartosz Markowski
  • [1/5] ath10k: fix IRAM banks number for QCA9377   Kalle Valo
• [PATCH] ath10k: fix incorrect txpower set by P2P_DEVICE interface   ryanhsu at qca.qualcomm.com
• ath10k raw mode   Andreas Christoforou
  • ath10k raw mode   Michal Kazior
    • ath10k raw mode   Michal Kazior
• [PATCH 1/2] ath10k: htc: Removal of unused struct members   Erik Stromdahl
  • [PATCH 2/2] ath10k: htc: Simplified credit distribution.   Erik Stromdahl
• [RFC v2 11/11] ath10k: Added sdio support   Valo, Kalle
  • [RFC v2 11/11] ath10k: Added sdio support   Valo, Kalle
    • [RFC v2 11/11] ath10k: Added sdio support   Erik Stromdahl
  • [RFC v2 11/11] ath10k: Added sdio support   Valo, Kalle
    • [RFC v2 11/11] ath10k: Added sdio support   Erik Stromdahl
• [RFC v2 05/11] ath10k: htc: refactorization   Valo, Kalle
  • [RFC v2 05/11] ath10k: htc: refactorization   Michal Kazior
    • [RFC v2 05/11] ath10k: htc: refactorization   Valo, Kalle
      • [RFC v2 05/11] ath10k: htc: refactorization   Erik Stromdahl
      • [RFC v2 05/11] ath10k: htc: refactorization   Michal Kazior
      • [RFC v2 05/11] ath10k: htc: refactorization   Valo, Kalle
      • [RFC v2 05/11] ath10k: htc: refactorization   Valo, Kalle
      • [RFC v2 05/11] ath10k: htc: refactorization   Erik Stromdahl
• [PATCH V2] ath10k: fix incorrect txpower set by P2P_DEVICE interface   ryanhsu at qca.qualcomm.com
  • [V2] ath10k: fix incorrect txpower set by P2P_DEVICE interface   Kalle Valo
• [RFC v2 06/11] ath10k: htc: Added ATH10K_HTC_FLAG_BUNDLE_LSB   Valo, Kalle
• Compex WLE900VX wireless driver   Mikhail Sokolovskyy
  • Compex WLE900VX wireless driver   Bruno Antunes
• ath10k truesize issue?   Ben Greear
• [PATCH v2] ath10k: Fix crash during rmmod when probe firmware fails   Mohammed Shafi Shajakhan
• [PATCH v3] ath10k: Fix crash during rmmod when probe firmware fails   Mohammed Shafi Shajakhan
• Can the ath10k driver support more than one MAC address?   Gordon, Charles
  • Can the ath10k driver support more than one MAC address?   Janusz Dziedzic
  • Can the ath10k driver support more than one MAC address?   Adrian Chadd
    • Can the ath10k driver support more than one MAC address?   Ben Greear
• [PATCH] ath10k: support dev_coredump for crash dump   Kalle Valo
  • ath10k: support dev_coredump for crash dump   Kalle Valo
• [PATCH] ath10k: recal the txpower when removing interface   ryanhsu at qca.qualcomm.com
  • ath10k: recal the txpower when removing interface   Kalle Valo
• [PATCH] ath10k: ignore configuring the incorrect board_id   ryanhsu at qca.qualcomm.com
  • ath10k: ignore configuring the incorrect board_id   Kalle Valo
• [PATCH] ath10k: Remove passing unused argument for ath10k_mac_tx   Mohammed Shafi Shajakhan
  • ath10k: Remove passing unused argument for ath10k_mac_tx   Kalle Valo
• [PATCH] ath10k: Enable advertising support for channel 169, 5Ghz   Mohammed Shafi Shajakhan
  • ath10k: Enable advertising support for channel 169, 5Ghz   Kalle Valo
• QCA9377 Bluetooth Audio not working with HSP profile   Yevgeniy Melnichuk

Last message date: Fri Dec 30 07:56:53 PST 2016
Archived on: Fri Dec 30 07:57:18 PST 2016

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...