ath10k: ignore configuring the incorrect board_id

[Kalle Valo]

Ryan Hsu <ryanhsu at qca.qualcomm.com> wrote:
> From: Ryan Hsu <ryanhsu at qca.qualcomm.com>
> 
> With command to get board_id from otp, in the case of following
> 
>   boot get otp board id result 0x00000000 board_id 0 chip_id 0
>   boot using board name 'bus=pci,bmi-chip-id=0,bmi-board-id=0"
>   ...
>   failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=0 from
>   ath10k/QCA6174/hw3.0/board-2.bin
> 
> The invalid board_id=0 will be used as index to search in the board-2.bin.
> 
> Ignore the case with board_id=0, as it means the otp is not carrying
> the board id information.
> 
> Signed-off-by: Ryan Hsu <ryanhsu at qca.qualcomm.com>

Patch applied to ath-next branch of ath.git, thanks.

d2e202c06ca4 ath10k: ignore configuring the incorrect board_id

-- 
https://patchwork.kernel.org/patch/9486941/

Documentation about submitting wireless patches and checking status
from patchwork:

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches