September 2020 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Sep 2 04:49:27 EDT 2020
Ending: Tue Sep 22 03:40:23 EDT 2020
Messages: 146

• [PATCH v2 01/12] wcn36xx: Add VHT fields to parameter data structures   Bryan O'Donoghue
• [PATCH v2 03/10] wcn36xx: Add ieee802.11 VHT flags   Bryan O'Donoghue
• [PATCH v3 0/2] wcn36xx: Extend V1 data-structures   Bryan O'Donoghue
• [PATCH v3 1/2] wcn36xx: Add VHT fields to parameter data structures   Bryan O'Donoghue
• [PATCH v3 2/2] wcn36xx: Use V1 data structure to store supported rates   Bryan O'Donoghue
• [PATCH v3 0/7] wcn36xx: Add a set of helpers to enable VHT parameter passing   Bryan O'Donoghue
• [PATCH v3 1/7] wcn36xx: Add wcn36xx_set_default_rates_v1   Bryan O'Donoghue
• [PATCH v3 2/7] wcn36xx: Add wcn36xx_smd_set_sta_default_vht_params()   Bryan O'Donoghue
• [PATCH v3 3/7] wcn36xx: Add wcn36xx_smd_set_sta_default_ht_ldpc_params()   Bryan O'Donoghue
• [PATCH v3 4/7] wcn36xx: Add wcn36xx_smd_set_sta_vht_params()   Bryan O'Donoghue
• [PATCH v3 5/7] wcn36xx: Add wcn36xx_smd_set_sta_ht_ldpc_params()   Bryan O'Donoghue
• [PATCH v3 6/7] wcn36xx: Add wcn36xx_smd_set_bss_vht_params()   Bryan O'Donoghue
• [PATCH v3 7/7] wcn36xx: Add wrapper function wcn36xx_smd_set_sta_params_v1()   Bryan O'Donoghue
• [PATCH v3 0/7] wcn36xx: Tidy up BSS/STA config   Bryan O'Donoghue
• [PATCH v3 1/7] wcn36xx: Functionally decompose wcn36xx_smd_config_sta()   Bryan O'Donoghue
• [PATCH v3 2/7] wcn36xx: Move wcn36xx_smd_set_sta_params() inside wcn36xx_smd_config_bss()   Bryan O'Donoghue
• [PATCH v3 3/7] wcn36xx: Move BSS parameter setup to wcn36xx_smd_set_bss_params()   Bryan O'Donoghue
• [PATCH v3 4/7] wcn36xx: Update wcn36xx_smd_config_bss_v1() to operate internally   Bryan O'Donoghue
• [PATCH v3 5/7] wcn36xx: Add wcn36xx_smd_config_bss_v0   Bryan O'Donoghue
• [PATCH v3 6/7] wcn36xx: Convert to using wcn36xx_smd_config_bss_v0()   Bryan O'Donoghue
• [PATCH v3 7/7] wcn36xx: Remove dead code in wcn36xx_smd_config_bss()   Bryan O'Donoghue
• [PATCH v3 0/5] wcn36xx: PHY modifications to support 80MHz operation   Bryan O'Donoghue
• [PATCH v3 1/5] wcn36xx: Add accessor macro HW_VALUE_CHANNEL for hardware channels   Bryan O'Donoghue
• [PATCH v3 2/5] wcn36xx: Use HW_VALUE_CHANNEL macro to get channel number   Bryan O'Donoghue
• [PATCH v3 3/5] wcn36xx: Add accessor macro HW_VALUE_PHY for PHY settings   Bryan O'Donoghue
• [PATCH v3 4/5] wcn36xx: Encode PHY mode for 80MHz channel in hw_value   Bryan O'Donoghue
• [PATCH v3 5/5] wcn36xx: Set PHY into correct mode for 80MHz channel width   Bryan O'Donoghue
• [PATCH v3 0/4] wcn36xx: Update firmware config to support wcn3680   Bryan O'Donoghue
• [PATCH v3 1/4] wcn36xx: Extend HAL param config list   Bryan O'Donoghue
• [PATCH v3 2/4] wcn36xx: Define wcn3680 specific firmware parameters   Bryan O'Donoghue
• [PATCH v3 3/4] wcn36xx: Add ability to download wcn3680 specific firmware parameters   Bryan O'Donoghue
• [PATCH v3 4/4] wcn36xx: Latch VHT specific BSS parameters to firmware   Bryan O'Donoghue
• [PATCH v3 0/2] wcn36xx: Enable VHT when supported   Bryan O'Donoghue
• [PATCH v3 1/2] wcn36xx: Add VHT rates to wcn36xx_update_allowed_rates()   Bryan O'Donoghue
• [PATCH v3 2/2] wcn36xx: Advertise ieee802.11 VHT flags   Bryan O'Donoghue
• [PATCH v3 0/2] wcn36xx: Miscellaneous updates   Bryan O'Donoghue
• [PATCH v3 1/2] wcn36xx: Mark internal smd functions static   Bryan O'Donoghue
• [PATCH v3 2/2] wcn36xx: Ensure spaces between functions   Bryan O'Donoghue
• [RESEND PATCH v3 0/2] wcn36xx: Enable VHT when supported   Bryan O'Donoghue
• [PATCH v3 1/2] wcn36xx: Add VHT rates to wcn36xx_update_allowed_rates()   Bryan O'Donoghue
• [PATCH v3 2/2] wcn36xx: Advertise ieee802.11 VHT flags   Bryan O'Donoghue
• [RESEND PATCH v3 0/2] wcn36xx: Miscellaneous updates   Bryan O'Donoghue
• [PATCH v3 1/2] wcn36xx: Mark internal smd functions static   Bryan O'Donoghue
• [PATCH v3 2/2] wcn36xx: Ensure spaces between functions   Bryan O'Donoghue
• [PATCH v3 2/7] wcn36xx: Add wcn36xx_smd_set_sta_default_vht_params()   Bryan O'Donoghue
• [PATCH v4 0/2] wcn36xx: Extend V1 data-structures   Bryan O'Donoghue
• [PATCH v4 1/2] wcn36xx: Add VHT fields to parameter data structures   Bryan O'Donoghue
• [PATCH v4 2/2] wcn36xx: Use V1 data structure to store supported rates   Bryan O'Donoghue
• [PATCH v4 0/7] wcn36xx: Add a set of helpers to enable VHT parameter passing   Bryan O'Donoghue
• [PATCH v4 1/7] wcn36xx: Add wcn36xx_set_default_rates_v1   Bryan O'Donoghue
• [PATCH v4 2/7] wcn36xx: Add wcn36xx_smd_set_sta_default_vht_params()   Bryan O'Donoghue
• [PATCH v4 3/7] wcn36xx: Add wcn36xx_smd_set_sta_default_ht_ldpc_params()   Bryan O'Donoghue
• [PATCH v4 4/7] wcn36xx: Add wcn36xx_smd_set_sta_vht_params()   Bryan O'Donoghue
• [PATCH v4 5/7] wcn36xx: Add wcn36xx_smd_set_sta_ht_ldpc_params()   Bryan O'Donoghue
• [PATCH v4 6/7] wcn36xx: Add wcn36xx_smd_set_bss_vht_params()   Bryan O'Donoghue
• [PATCH v4 7/7] wcn36xx: Add wrapper function wcn36xx_smd_set_sta_params_v1()   Bryan O'Donoghue
• [PATCH v4 0/7] wcn36xx: Tidy up BSS/STA config   Bryan O'Donoghue
• [PATCH v4 1/7] wcn36xx: Functionally decompose wcn36xx_smd_config_sta()   Bryan O'Donoghue
• [PATCH v4 2/7] wcn36xx: Move wcn36xx_smd_set_sta_params() inside wcn36xx_smd_config_bss()   Bryan O'Donoghue
• [PATCH v4 3/7] wcn36xx: Move BSS parameter setup to wcn36xx_smd_set_bss_params()   Bryan O'Donoghue
• [PATCH v4 4/7] wcn36xx: Update wcn36xx_smd_config_bss_v1() to operate internally   Bryan O'Donoghue
• [PATCH v4 5/7] wcn36xx: Add wcn36xx_smd_config_bss_v0   Bryan O'Donoghue
• [PATCH v4 6/7] wcn36xx: Convert to using wcn36xx_smd_config_bss_v0()   Bryan O'Donoghue
• [PATCH v4 7/7] wcn36xx: Remove dead code in wcn36xx_smd_config_bss()   Bryan O'Donoghue
• [PATCH v4 0/5] wcn36xx: PHY modifications to support 80MHz operation   Bryan O'Donoghue
• [PATCH v4 1/5] wcn36xx: Add accessor macro HW_VALUE_CHANNEL for hardware channels   Bryan O'Donoghue
• [PATCH v4 2/5] wcn36xx: Use HW_VALUE_CHANNEL macro to get channel number   Bryan O'Donoghue
• [PATCH v4 3/5] wcn36xx: Add accessor macro HW_VALUE_PHY for PHY settings   Bryan O'Donoghue
• [PATCH v4 4/5] wcn36xx: Encode PHY mode for 80MHz channel in hw_value   Bryan O'Donoghue
• [PATCH v4 5/5] wcn36xx: Set PHY into correct mode for 80MHz channel width   Bryan O'Donoghue
• [PATCH v4 0/4] wcn36xx: Update firmware config to support wcn3680   Bryan O'Donoghue
• [PATCH v4 1/4] wcn36xx: Extend HAL param config list   Bryan O'Donoghue
• [PATCH v4 2/4] wcn36xx: Define wcn3680 specific firmware parameters   Bryan O'Donoghue
• [PATCH v4 3/4] wcn36xx: Add ability to download wcn3680 specific firmware parameters   Bryan O'Donoghue
• [PATCH v4 4/4] wcn36xx: Latch VHT specific BSS parameters to firmware   Bryan O'Donoghue
• [PATCH v4 0/4] wcn36xx: Enable VHT when supported   Bryan O'Donoghue
• [PATCH v4 1/4] wcn36xx: Define INIT_HAL_MSG_V1()   Bryan O'Donoghue
• [PATCH v4 2/4] wcn36xx: Convert to VHT parameter structure on wcn3680   Bryan O'Donoghue
• [PATCH v4 3/4] wcn36xx: Add VHT rates to wcn36xx_update_allowed_rates()   Bryan O'Donoghue
• [PATCH v4 4/4] wcn36xx: Advertise ieee802.11 VHT flags   Bryan O'Donoghue
• [PATCH v4 0/2] wcn36xx: Miscellaneous updates   Bryan O'Donoghue
• [PATCH v4 1/2] wcn36xx: Mark internal smd functions static   Bryan O'Donoghue
• [PATCH v4 2/2] wcn36xx: Ensure spaces between functions   Bryan O'Donoghue
• [PATCH v4 0/4] wcn36xx: Enable VHT when supported   Bryan O'Donoghue
• [PATCH v4 0/4] wcn36xx: Enable VHT when supported   Bryan O'Donoghue
• [PATCH v5 0/2] wcn36xx: Extend V1 data-structures   Bryan O'Donoghue
• [PATCH v5 1/2] wcn36xx: Add VHT fields to parameter data structures   Bryan O'Donoghue
• [PATCH v5 2/2] wcn36xx: Use V1 data structure to store supported rates   Bryan O'Donoghue
• [PATCH v5 0/7] wcn36xx: Add a set of helpers to enable VHT parameter passing   Bryan O'Donoghue
• [PATCH v5 1/7] wcn36xx: Add wcn36xx_set_default_rates_v1   Bryan O'Donoghue
• [PATCH v5 2/7] wcn36xx: Add wcn36xx_smd_set_sta_default_vht_params()   Bryan O'Donoghue
• [PATCH v5 3/7] wcn36xx: Add wcn36xx_smd_set_sta_default_ht_ldpc_params()   Bryan O'Donoghue
• [PATCH v5 4/7] wcn36xx: Add wcn36xx_smd_set_sta_vht_params()   Bryan O'Donoghue
• [PATCH v5 5/7] wcn36xx: Add wcn36xx_smd_set_sta_ht_ldpc_params()   Bryan O'Donoghue
• [PATCH v5 6/7] wcn36xx: Add wcn36xx_smd_set_bss_vht_params()   Bryan O'Donoghue
• [PATCH v5 7/7] wcn36xx: Add wrapper function wcn36xx_smd_set_sta_params_v1()   Bryan O'Donoghue
• [PATCH v5 0/7] wcn36xx: Tidy up BSS/STA config   Bryan O'Donoghue
• [PATCH v5 1/7] wcn36xx: Functionally decompose wcn36xx_smd_config_sta()   Bryan O'Donoghue
• [PATCH v5 2/7] wcn36xx: Move wcn36xx_smd_set_sta_params() inside wcn36xx_smd_config_bss()   Bryan O'Donoghue
• [PATCH v5 3/7] wcn36xx: Move BSS parameter setup to wcn36xx_smd_set_bss_params()   Bryan O'Donoghue
• [PATCH v5 4/7] wcn36xx: Update wcn36xx_smd_config_bss_v1() to operate internally   Bryan O'Donoghue
• [PATCH v5 5/7] wcn36xx: Add wcn36xx_smd_config_bss_v0   Bryan O'Donoghue
• [PATCH v5 6/7] wcn36xx: Convert to using wcn36xx_smd_config_bss_v0()   Bryan O'Donoghue
• [PATCH v5 7/7] wcn36xx: Remove dead code in wcn36xx_smd_config_bss()   Bryan O'Donoghue
• [PATCH v5 0/5] wcn36xx: PHY modifications to support 80MHz operation   Bryan O'Donoghue
• [PATCH v5 1/5] wcn36xx: Add accessor macro HW_VALUE_CHANNEL for hardware channels   Bryan O'Donoghue
• [PATCH v5 2/5] wcn36xx: Use HW_VALUE_CHANNEL macro to get channel number   Bryan O'Donoghue
• [PATCH v5 3/5] wcn36xx: Add accessor macro HW_VALUE_PHY for PHY settings   Bryan O'Donoghue
• [PATCH v5 4/5] wcn36xx: Encode PHY mode for 80MHz channel in hw_value   Bryan O'Donoghue
• [PATCH v5 5/5] wcn36xx: Set PHY into correct mode for 80MHz channel width   Bryan O'Donoghue
• [PATCH v5 0/4] wcn36xx: Update firmware config to support wcn3680   Bryan O'Donoghue
• [PATCH v5 1/4] wcn36xx: Extend HAL param config list   Bryan O'Donoghue
• [PATCH v5 2/4] wcn36xx: Define wcn3680 specific firmware parameters   Bryan O'Donoghue
• [PATCH v5 3/4] wcn36xx: Add ability to download wcn3680 specific firmware parameters   Bryan O'Donoghue
• [PATCH v5 4/4] wcn36xx: Latch VHT specific BSS parameters to firmware   Bryan O'Donoghue
• [PATCH v5 0/4] wcn36xx: Enable VHT when supported   Bryan O'Donoghue
• [PATCH v5 1/4] wcn36xx: Define INIT_HAL_MSG_V1()   Bryan O'Donoghue
• [PATCH v5 2/4] wcn36xx: Convert to VHT parameter structure on wcn3680   Bryan O'Donoghue
• [PATCH v5 3/4] wcn36xx: Add VHT rates to wcn36xx_update_allowed_rates()   Bryan O'Donoghue
• [PATCH v5 4/4] wcn36xx: Advertise ieee802.11 VHT flags   Bryan O'Donoghue
• [PATCH v5 0/2] wcn36xx: Miscellaneous updates   Bryan O'Donoghue
• [PATCH v5 1/2] wcn36xx: Mark internal smd functions static   Bryan O'Donoghue
• [PATCH v5 2/2] wcn36xx: Ensure spaces between functions   Bryan O'Donoghue
• [PATCH v5 0/2] wcn36xx: Miscellaneous updates   Bryan O'Donoghue
• [PATCH v5 0/2] wcn36xx: Miscellaneous updates   Bryan O'Donoghue
• [PATCH v5 0/2] wcn36xx: Miscellaneous updates   Bryan O'Donoghue
• [PATCH v2 01/10] wcn36xx: Add a chip identifier for WCN3680   Kalle Valo
• [PATCH v2 03/10] wcn36xx: Add ieee802.11 VHT flags   Kalle Valo
• [PATCH v2 01/12] wcn36xx: Add VHT fields to parameter data structures   Kalle Valo
• [PATCH v2 01/12] wcn36xx: Add VHT fields to parameter data structures   Kalle Valo
• [PATCH v2 03/10] wcn36xx: Add ieee802.11 VHT flags   Kalle Valo
• [PATCH v5 0/2] wcn36xx: Miscellaneous updates   Kalle Valo
• [PATCH v5 1/2] wcn36xx: Add VHT fields to parameter data structures   Kalle Valo
• [PATCH v5 1/7] wcn36xx: Add wcn36xx_set_default_rates_v1   Kalle Valo
• [PATCH v5 1/7] wcn36xx: Functionally decompose wcn36xx_smd_config_sta()   Kalle Valo
• [PATCH v5 1/5] wcn36xx: Add accessor macro HW_VALUE_CHANNEL for hardware channels   Kalle Valo
• [PATCH v5 1/5] wcn36xx: Add accessor macro HW_VALUE_CHANNEL for hardware channels   Kalle Valo
• [PATCH v5 1/4] wcn36xx: Extend HAL param config list   Kalle Valo
• [PATCH v5 1/4] wcn36xx: Extend HAL param config list   Kalle Valo
• [PATCH v5 1/4] wcn36xx: Define INIT_HAL_MSG_V1()   Kalle Valo
• [PATCH v5 1/2] wcn36xx: Mark internal smd functions static   Kalle Valo
• [PATCH v3 2/7] wcn36xx: Add wcn36xx_smd_set_sta_default_vht_params()   kernel test robot
• [PATCH v4 3/7] wcn36xx: Move BSS parameter setup to wcn36xx_smd_set_bss_params()   kernel test robot
• [PATCH v4 5/7] wcn36xx: Add wcn36xx_smd_config_bss_v0   kernel test robot
• [PATCH v4 3/7] wcn36xx: Move BSS parameter setup to wcn36xx_smd_set_bss_params()   kernel test robot
• [PATCH v4 5/7] wcn36xx: Add wcn36xx_smd_config_bss_v0   kernel test robot

Last message date: Tue Sep 22 03:40:23 EDT 2020
Archived on: Tue Sep 22 03:40:38 EDT 2020

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...