[PATCH v4 0/7] wcn36xx: Add a set of helpers to enable VHT parameter passing

[Bryan O'Donoghue]

This series is two in a set of seven to add support for wcn3680 at 802.11ac
data-rates.

V4:
- No functional change.
  Sending out full set again using --base=ath-202009090652 to aid kernel
  test robot
- https://lore.kernel.org/linux-wireless/20200908182437.2870281-1-bryan.odonoghue@linaro.org/T/#t

V3:
- Enables MU-MIMO bits in wcn36xx_smd_set_sta_vht_params()
- Adds a set of helper functions. In the previous set these unused
  declarations would cause a warning during compile because they were
  declared static with the intention to add code later on to use them.

  To resolve that, I do not declare the functions static. Static
  declaration is done in a later patch after the functions have been used.

- There are two good reasons for this:
  1. Granularity. I think its important and useful to have a patch per
     function that clearly sets out what it does and why.
  2. Patch size. Declaring seven functions at the time of their first
     use is not good practice.

I think maintaining patch granularity is a good enough reason to not squash
these commits down. It is pretty trivial to declare the functions static
later on without generating compile warnings in the interregnum.

V2:
This set makes a series of modifications to enable passing of an extended
V1 data-structure to the firmware.

A series of of helper functions are added to facilitate the setup.

The final step in the process is enabling the extended data-structure
parameter passing for the wcn3680 only.

Only a firmware that is capable of 80211.ac will accept the larger V1
messages and only after explicitly enabling the DOT11AC firmware feature
bit.

- No functional difference from V1 for these patches
  Breaking into smaller chunks to enable easier review/merging

V1:

https://lore.kernel.org/linux-wireless/87eensldhi.fsf@codeaurora.org/T/#t

Bryan O'Donoghue (7):
  wcn36xx: Add wcn36xx_set_default_rates_v1
  wcn36xx: Add wcn36xx_smd_set_sta_default_vht_params()
  wcn36xx: Add wcn36xx_smd_set_sta_default_ht_ldpc_params()
  wcn36xx: Add wcn36xx_smd_set_sta_vht_params()
  wcn36xx: Add wcn36xx_smd_set_sta_ht_ldpc_params()
  wcn36xx: Add wcn36xx_smd_set_bss_vht_params()
  wcn36xx: Add wrapper function wcn36xx_smd_set_sta_params_v1()

 drivers/net/wireless/ath/wcn36xx/main.c    |  8 ++
 drivers/net/wireless/ath/wcn36xx/smd.c     | 90 ++++++++++++++++++++++
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h |  1 +
 3 files changed, 99 insertions(+)


base-commit: 160b351d75cb50a0dd2abf9b63e1891935aa9e4a
prerequisite-patch-id: 9a4ac7faca179f6594c9b3a115ee69a2da540a69
prerequisite-patch-id: 183286f9c22d1aaa12f356651224e6b337ef1938
-- 
2.27.0