[PATCH v5 4/7] wcn36xx: Add wcn36xx_smd_set_sta_vht_params()

[Bryan O'Donoghue]

This commit adds support for setting VHT parameters based on the declared
VHT capability bits in the VHT capability structure.

We cannot do 160MHz so VHT Channel width set should be zero.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>
---
 drivers/net/wireless/ath/wcn36xx/smd.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index e926bbaec220..1432f310f758 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -174,6 +174,31 @@ static void wcn36xx_smd_set_sta_ht_params(struct ieee80211_sta *sta,
 	}
 }
 
+void wcn36xx_smd_set_sta_vht_params(struct wcn36xx *wcn,
+		struct ieee80211_sta *sta,
+		struct wcn36xx_hal_config_sta_params_v1 *sta_params);
+void wcn36xx_smd_set_sta_vht_params(struct wcn36xx *wcn,
+		struct ieee80211_sta *sta,
+		struct wcn36xx_hal_config_sta_params_v1 *sta_params)
+{
+	if (sta->vht_cap.vht_supported) {
+		unsigned long caps = sta->vht_cap.cap;
+
+		sta_params->vht_capable = sta->vht_cap.vht_supported;
+		sta_params->vht_ldpc_enabled =
+			is_cap_supported(caps, IEEE80211_VHT_CAP_RXLDPC);
+		if (get_feat_caps(wcn->fw_feat_caps, MU_MIMO)) {
+			sta_params->vht_tx_mu_beamformee_capable =
+				is_cap_supported(caps, IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE);
+			if (sta_params->vht_tx_mu_beamformee_capable)
+			       sta_params->vht_tx_bf_enabled = 1;
+		} else {
+			sta_params->vht_tx_mu_beamformee_capable = 0;
+		}
+		sta_params->vht_tx_channel_width_set = 0;
+	}
+}
+
 static void wcn36xx_smd_set_sta_default_ht_params(
 		struct wcn36xx_hal_config_sta_params *sta_params)
 {
-- 
2.27.0