[PATCH v5 1/5] wcn36xx: Add accessor macro HW_VALUE_CHANNEL for hardware channels

[Bryan O'Donoghue]

Adds HW_VALUE_CHANNEL(hw_value) an access macro that will be used to
extract the channel number from struct ieee80211_channel->hw_value in
preparation for also storing PHY settings for 802.11ac in the upper bits of
hw_value.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>
---
 drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
index 2da81d9926c4..ebce1ed7adf7 100644
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -83,7 +83,9 @@ enum wcn36xx_ampdu_state {
 	WCN36XX_AMPDU_OPERATIONAL,
 };
 
-#define WCN36XX_HW_CHANNEL(__wcn) (__wcn->hw->conf.chandef.chan->hw_value)
+#define HW_VALUE_CHANNEL(hw_value) ((hw_value) & 0xFF)
+#define WCN36XX_HW_CHANNEL(__wcn)\
+	HW_VALUE_CHANNEL(__wcn->hw->conf.chandef.chan->hw_value)
 #define WCN36XX_BAND(__wcn) (__wcn->hw->conf.chandef.chan->band)
 #define WCN36XX_CENTER_FREQ(__wcn) (__wcn->hw->conf.chandef.chan->center_freq)
 #define WCN36XX_LISTEN_INTERVAL(__wcn) (__wcn->hw->conf.listen_interval)
-- 
2.27.0