October 2021 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Oct 1 01:27:12 PDT 2021
Ending: Sun Oct 31 23:55:58 PDT 2021
Messages: 204

• [PATCH V4] Makefile: Add build time and compiler info string   Jessica Clarke
• [PATCH V4] Makefile: Add build time and compiler info string   Jessica Clarke
• Release Plans   Jessica Clarke
• [PATCH 1/1] dt-bindings: reg-io-width for SiFive CLINT   Jessica Clarke
• [PATCH v2 0/5] I2C framework, reboot Unmatched via PMIC   Jessica Clarke
• [PATCH v2 0/5] I2C framework, reboot Unmatched via PMIC   Jessica Clarke
• [PATCH v6] Makefile: Add build time and compiler info string   Jessica Clarke
• [PATCH 1/1] dt-bindings: T-HEAD CLINT   Jessica Clarke
• [PATCH] lib: utils/reset: Add voltage level for gpio_reset   Jessica Clarke
• [RFC PATCH 2/2] lib: utils/timer: Add a separate compatible for the D1 CLINT   Jessica Clarke
• [PATCH] lib: utils/reset: Add voltage level for gpio_reset   Jessica Clarke
• [PATCH] lib: utils/reset: Add voltage level for gpio_reset   Jessica Clarke
• [PATCH] lib: utils:/gpio: Improve the sifive gpio driver   Jessica Clarke
• [PATCH v2] lib: sbi: Save context for all non-retentive suspend types   Dong Du
• [PATCH] lib: sbi: sbi_system_reset() if not supported   Dong Du
• [PATCH] lib: utils/reset: Register separate GPIO system reset devices   Dong Du
• [PATCH] lib: sbi: Refine addr format in sbi_printf   Dong Du
• [PATCH v2 3/3] lib: sbi: error handling in fdt_reset_init()   Dong Du
• [PATCH] lib: sbi: Fix GPA passed to __sbi_hfence_gvma_xyz() functions   Dong Du
• [PATCH v3 1/3] lib: sbi: move sbi_boot_print_general()   Dong Du
• [PATCH v2 2/3] platform: generic: move fdt_reset_init to final_init   Dong Du
• [PATCH v2 3/3] lib: sbi: error handling in fdt_reset_init()   Dong Du
• [PATCH v5] Makefile: Add build time and compiler info string   Alistair Francis
• [PATCH v5] Makefile: Add build time and compiler info string   Alistair Francis
• [PATCH V4] Makefile: Add build time and compiler info string   Wei Fu
• [PATCH v2 0/5] I2C framework, reboot Unmatched via PMIC   Alexandre Ghiti
• [PATCH v2 0/5] I2C framework, reboot Unmatched via PMIC   Alexandre Ghiti
• [PATCH v2 2/5] lib: utils/i2c: Add generic I2C configuration library   Alexandre Ghiti
• [PATCH v2 3/5] lib: utils/i2c: Add simple FDT based I2C framework   Alexandre Ghiti
• [PATCH v2 4/5] lib: utils/i2c: Add minimal SiFive I2C driver   Alexandre Ghiti
• [PATCH v2 5/5] lib: utils/reset: Add generic da9063 reset driver   Alexandre Ghiti
• [PATCH v2 0/5] I2C framework, reboot Unmatched via PMIC   Alexandre Ghiti
• [PATCH v2 0/5] I2C framework, reboot Unmatched via PMIC   Alexandre Ghiti
• [PATCH v2 2/5] lib: utils/i2c: Add generic I2C configuration library   Alexandre Ghiti
• [PATCH v2 5/5] lib: utils/reset: Add generic da9063 reset driver   Alexandre Ghiti
• [PATCH v2 0/5] I2C framework, reboot Unmatched via PMIC   Alexandre Ghiti
• [PATCH v2 5/5] lib: utils/reset: Add generic da9063 reset driver   Alexandre Ghiti
• [PATCH v2 0/5] I2C framework, reboot Unmatched via PMIC   Alexandre Ghiti
• [PATCH 1/1] lib: utils/reset: error handling in fdt_reset_init()   Alexandre Ghiti
• [PATCH] include: sbi_utils: Introduce an helper to get fdt base address   Alexandre Ghiti
• [PATCH 1/1] dt-bindings: T-HEAD CLINT   Rob Herring
• [PATCH 1/1] dt-bindings: T-HEAD CLINT   Rob Herring
• [PATCH v2] lib: utils/irqchip: Automatically delegate T-HEAD PLIC access   Samuel Holland
• [RFC PATCH 0/2] Add support for Allwinner D1 CLINT   Samuel Holland
• [PATCH 1/2] lib: utils/fdt: Require match data to be const   Samuel Holland
• [RFC PATCH 2/2] lib: utils/timer: Add a separate compatible for the D1 CLINT   Samuel Holland
• [PATCH] lib: utils/reset: Add voltage level for gpio_reset   Samuel Holland
• [PATCH v5] Makefile: Add build time and compiler info string   Peter Korsgaard
• [PATCH v5] Makefile: Add build time and compiler info string   Peter Korsgaard
• [PATCH v6] Makefile: Add build time and compiler info string   Peter Korsgaard
• [PATCH v6] Makefile: Add build time and compiler info string   Peter Korsgaard
• [OpenSBI] rfence related question   Leo Liang
• [OpenSBI] rfence related question   Leo Liang
• [PATCH V4] Makefile: Add build time and compiler info string   Bin Meng
• Release Plans   Bin Meng
• [PATCH 1/1] dt-bindings: reg-io-width for SiFive CLINT   Bin Meng
• [PATCH 1/1] dt-bindings: reg-io-width for SiFive CLINT   Bin Meng
• [PATCH v2] lib: utils/irqchip: Automatically delegate T-HEAD PLIC access   Bin Meng
• [PATCH v5] Makefile: Add build time and compiler info string   Bin Meng
• [PATCH v5] Makefile: Add build time and compiler info string   Bin Meng
• [PATCH v5] Makefile: Add build time and compiler info string   Bin Meng
• [PATCH v5] Makefile: Add build time and compiler info string   Bin Meng
• [PATCH v5] Makefile: Add build time and compiler info string   Bin Meng
• [PATCH v5] Makefile: Add build time and compiler info string   Bin Meng
• [PATCH v6] Makefile: Add build time and compiler info string   Bin Meng
• Release Plans   Bin Meng
• [PATCH] lib: sbi: Emulate debug CSR read/write   Bin Meng
• [PATCH] lib: sbi: Emulate debug CSR read/write   Bin Meng
• [PATCH 1/2] lib: sbi: convert reset to list   Anup Patel
• [PATCH 2/2] lib: sbi: add priority for reset handler   Anup Patel
• [PATCH 0/2] system reset rework to list, priority   Anup Patel
• [PATCH V4] Makefile: Add build time and compiler info string   Anup Patel
• [PATCH 1/2] lib: sbi: convert reset to list   Anup Patel
• [PATCH 2/2] lib: sbi: add priority for reset handler   Anup Patel
• [PATCH] lib: sbi: Save context for all non-retentive suspend types   Anup Patel
• [PATCH] lib: sbi: Save context for all non-retentive suspend types   Anup Patel
• [PATCH v2] lib: sbi: Save context for all non-retentive suspend types   Anup Patel
• Release Plans   Anup Patel
• [PATCH v5] Makefile: Add build time and compiler info string   Anup Patel
• [PATCH] lib: sbi: sbi_system_reset() if not supported   Anup Patel
• [PATCH v2 1/1] dt-bindings: reg-io-width for SiFive CLINT   Anup Patel
• PATCH for Issue 225   Anup Patel
• [PATCH v5] Makefile: Add build time and compiler info string   Anup Patel
• [PATCH v5] Makefile: Add build time and compiler info string   Anup Patel
• [PATCH v5] Makefile: Add build time and compiler info string   Anup Patel
• [PATCH] lib: sbi: sbi_system_reset() if not supported   Anup Patel
• [PATCH v5] Makefile: Add build time and compiler info string   Anup Patel
• [PATCH 1/1] lib: sbi: system reset with invalid parameters   Anup Patel
• [PATCH v2] lib: sbi: Save context for all non-retentive suspend types   Anup Patel
• [RFC PATCH 0/2] Add support for Allwinner D1 CLINT   Anup Patel
• [PATCH v6] Makefile: Add build time and compiler info string   Anup Patel
• [PATCH 1/1] dt-bindings: T-HEAD CLINT   Anup Patel
• [PATCH 1/1] dt-bindings: T-HEAD CLINT   Anup Patel
• [PATCH v6] Makefile: Add build time and compiler info string   Anup Patel
• [PATCH v2] lib: utils/irqchip: Automatically delegate T-HEAD PLIC access   Anup Patel
• [PATCH] lib: utils/reset: Register separate GPIO system reset devices   Anup Patel
• [PATCH v6] Makefile: Add build time and compiler info string   Anup Patel
• [PATCH] lib: utils/reset: Register separate GPIO system reset devices   Anup Patel
• [PATCH] lib: utils:/gpio: Improve the sifive gpio driver   Anup Patel
• [PATCH] lib: utils:/gpio: Improve the sifive gpio driver   Anup Patel
• Release Plans   Anup Patel
• [PATCH 1/1] lib: utils/reset: error handling in fdt_reset_init()   Anup Patel
• [PATCH 1/1] lib: utils/reset: error handling in fdt_reset_init()   Anup Patel
• [PATCH] lib: sbi: Fix GPA passed to __sbi_hfence_gvma_xyz() functions   Anup Patel
• [PATCH] lib: sbi: Fix GPA passed to __sbi_hfence_gvma_xyz() functions   Anup Patel
• [PATCH] lib: sbi: Emulate debug CSR read/write   Anup Patel
• Release Plans   Atish Patra
• [OpenSBI] rfence related question   Atish Patra
• [PATCH 1/1] lib: sbi: system reset with invalid parameters   Atish Patra
• [PATCH v2 00/10] Sscof extension support   Atish Patra
• [PATCH v2 01/10] riscv: Add new CSRs introduced by Sscofpmf extension   Atish Patra
• [PATCH v2 02/10] lib: sbi: Use csr_read/write_num for mhpmevent[h] csrs as well   Atish Patra
• [PATCH v2 03/10] lib: sbi: Detect SSCOF extension at run time   Atish Patra
• [PATCH v2 04/10] lib: sbi: Delegate PMU counter overflow interrupt to S mode   Atish Patra
• [PATCH v2 05/10] lib: sbi: Support sscof extension in OpenSBI   Atish Patra
• [PATCH v2 06/10] lib: sbi: Always enable access for all counters   Atish Patra
• [PATCH v2 07/10] lib: sbi: Allow programmable counters to monitor cycle/instret events   Atish Patra
• [PATCH v2 08/10] lib: sbi: Reset the mhpmevent value upon counter reset   Atish Patra
• [PATCH v2 09/10] lib: sbi: Counter info width should be zero indexed   Atish Patra
• [PATCH v2 10/10] lib: sbi: Enable PMU extension for platforms without mcountinhibit   Atish Patra
• Release Plans   Atish Patra
• [PATCH 1/1] dt-bindings: reg-io-width for SiFive CLINT   Guo Ren
• [RFC PATCH 2/2] lib: utils/timer: Add a separate compatible for the D1 CLINT   Guo Ren
• [PATCH 1/2] lib: utils/fdt: Require match data to be const   Guo Ren
• [RFC PATCH 2/2] lib: utils/timer: Add a separate compatible for the D1 CLINT   Guo Ren
• [PATCH 1/1] dt-bindings: T-HEAD CLINT   Guo Ren
• [PATCH 1/1] dt-bindings: reg-io-width for SiFive CLINT   Heinrich Schuchardt
• [PATCH 1/1] dt-bindings: reg-io-width for SiFive CLINT   Heinrich Schuchardt
• [PATCH v2 1/1] dt-bindings: reg-io-width for SiFive CLINT   Heinrich Schuchardt
• [PATCH 1/1] dt-bindings: reg-io-width for SiFive CLINT   Heinrich Schuchardt
• [PATCH 1/1] lib: sbi: system reset with invalid parameters   Heinrich Schuchardt
• [PATCH] lib: sbi: sbi_system_reset() if not supported   Heinrich Schuchardt
• [PATCH] lib: sbi: sbi_system_reset() if not supported   Heinrich Schuchardt
• [PATCH v2 1/1] dt-bindings: reg-io-width for SiFive CLINT   Heinrich Schuchardt
• [RFC PATCH 2/2] lib: utils/timer: Add a separate compatible for the D1 CLINT   Heinrich Schuchardt
• [PATCH 1/1] dt-bindings: T-HEAD CLINT   Heinrich Schuchardt
• [PATCH 1/1] dt-bindings: T-HEAD CLINT   Heinrich Schuchardt
• [PATCH 1/1] dt-bindings: T-HEAD CLINT   Heinrich Schuchardt
• [PATCH v2 5/5] lib: utils/reset: Add generic da9063 reset driver   Heinrich Schuchardt
• [PATCH 1/1] lib: utils/reset: error handling in fdt_reset_init()   Heinrich Schuchardt
• [PATCH v2 5/5] lib: utils/reset: Add generic da9063 reset driver   Heinrich Schuchardt
• [PATCH 1/1] lib: utils/reset: error handling in fdt_reset_init()   Heinrich Schuchardt
• [PATCH v2 0/3] lib: sbi: error handling in fdt_reset_init()   Heinrich Schuchardt
• [PATCH v2 1/3] lib: sbi: move sbi_boot_print_general()   Heinrich Schuchardt
• [PATCH v2 2/3] platform: generic: move fdt_reset_init to final_init   Heinrich Schuchardt
• [PATCH v2 3/3] lib: sbi: error handling in fdt_reset_init()   Heinrich Schuchardt
• [PATCH v2 3/3] lib: sbi: error handling in fdt_reset_init()   Heinrich Schuchardt
• [PATCH v3 0/3] lib: sbi: error handling in fdt_reset_init()   Heinrich Schuchardt
• [PATCH v3 1/3] lib: sbi: move sbi_boot_print_general()   Heinrich Schuchardt
• [PATCH v2 2/3] platform: generic: move fdt_reset_init to final_init   Heinrich Schuchardt
• [PATCH v2 3/3] lib: sbi: error handling in fdt_reset_init()   Heinrich Schuchardt
• [PATCH v4 0/3] lib: sbi: error handling in fdt_reset_init()   Heinrich Schuchardt
• [PATCH v4 1/3] lib: sbi: move sbi_boot_print_general()   Heinrich Schuchardt
• [PATCH v4 2/3] platform: generic: move fdt_reset_init to final_init   Heinrich Schuchardt
• [PATCH v4 3/3] lib: sbi: error handling in fdt_reset_init()   Heinrich Schuchardt
• [PATCH] lib: sbi: Save context for all non-retentive suspend types   Andreas Schwab
• [PATCH v5] Makefile: Add build time and compiler info string   Andreas Schwab
• [PATCH v5] Makefile: Add build time and compiler info string   Andreas Schwab
• [RFC PATCH 2/2] lib: sbi: add priority for reset handler   Nikita Shubin
• [PATCH 0/2] system reset rework to list, priority   Nikita Shubin
• [PATCH 1/2] lib: sbi: convert reset to list   Nikita Shubin
• [PATCH 2/2] lib: sbi: add priority for reset handler   Nikita Shubin
• [PATCH 2/2] lib: sbi: add priority for reset handler   Nikita Shubin
• [PATCH v2 0/5] I2C framework, reboot Unmatched via PMIC   Nikita Shubin
• [PATCH v2 1/5] lib: utils/reset: add priority to gpio reset   Nikita Shubin
• [PATCH v2 2/5] lib: utils/i2c: Add generic I2C configuration library   Nikita Shubin
• [PATCH v2 3/5] lib: utils/i2c: Add simple FDT based I2C framework   Nikita Shubin
• [PATCH v2 4/5] lib: utils/i2c: Add minimal SiFive I2C driver   Nikita Shubin
• [PATCH v2 5/5] lib: utils/reset: Add generic da9063 reset driver   Nikita Shubin
• [PATCH v2 0/5] I2C framework, reboot Unmatched via PMIC   Nikita Shubin
• [PATCH v2 0/5] I2C framework, reboot Unmatched via PMIC   Nikita Shubin
• [PATCH v2 2/5] lib: utils/i2c: Add generic I2C configuration library   Nikita Shubin
• [PATCH v2 3/5] lib: utils/i2c: Add simple FDT based I2C framework   Nikita Shubin
• [PATCH v2 4/5] lib: utils/i2c: Add minimal SiFive I2C driver   Nikita Shubin
• [PATCH v2 5/5] lib: utils/reset: Add generic da9063 reset driver   Nikita Shubin
• [PATCH v2 0/5] I2C framework, reboot Unmatched via PMIC   Nikita Shubin
• [PATCH v2 0/5] I2C framework, reboot Unmatched via PMIC   Nikita Shubin
• [PATCH v2 5/5] lib: utils/reset: Add generic da9063 reset driver   Nikita Shubin
• [PATCH v2 5/5] lib: utils/reset: Add generic da9063 reset driver   Nikita Shubin
• [PATCH v2 0/5] I2C framework, reboot Unmatched via PMIC   Nikita Shubin
• [PATCH v3 0/3] lib: sbi: error handling in fdt_reset_init()   Nikita Shubin
• [PATCH v2] lib: sbi: Save context for all non-retentive suspend types   Xiang W
• [PATCH 1/1] lib: sbi: system reset with invalid parameters   Xiang W
• [PATCH 1/1] dt-bindings: reg-io-width for SiFive CLINT   Xiang W
• [PATCH] lib: utils/reset: Register separate GPIO system reset devices   Xiang W
• [PATCH] lib: utils/reset: Add voltage level for gpio_reset   Xiang W
• [PATCH 1/2] lib: utils/fdt: Require match data to be const   Xiang W
• [RFC PATCH 2/2] lib: utils/timer: Add a separate compatible for the D1 CLINT   Xiang W
• [PATCH] lib: utils/reset: Add voltage level for gpio_reset   Xiang W
• [PATCH] lib: utils/reset: Add voltage level for gpio_reset   Xiang W
• [PATCH] lib: utils/reset: Add voltage level for gpio_reset   Xiang W
• [PATCH] lib: utils/reset: Add voltage level for gpio_reset   Xiang W
• [PATCH] lib: utils:/gpio: Improve the sifive gpio driver   Xiang W
• [PATCH V2 0/2] lib: utils:/gpio: Improve the gpio driver   Xiang W
• [PATCH V2 1/2] lib: utils:/gpio: Improve the sifive gpio driver   Xiang W
• [PATCH V2 2/2] lib: utils:/gpio: Move the invert logic of ACTIVE_LOW to gpio   Xiang W
• [PATCH] lib: utils:/gpio: Improve the sifive gpio driver   Xiang W
• [PATCH] lib: sbi: Fix GPA passed to __sbi_hfence_gvma_xyz() functions   Xiang W
• [PATCH] lib: sbi: Fix GPA passed to __sbi_hfence_gvma_xyz() functions   Xiang W
• [PATCH] include: sbi_utils: Introduce an helper to get fdt base address   Xiang W
• [PATCH] lib: sbi: Emulate debug CSR read/write   Xiang W
• [PATCH] lib: utils:/gpio: Improve the sifive gpio driver   Green Wan
• [PATCH v6] Makefile: Add build time and compiler info string   Fu Wei
• Release Plans   Alexandre ghiti

Last message date: Sun Oct 31 23:55:58 PDT 2021
Archived on: Sun Oct 31 23:56:14 PDT 2021

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...