[PATCH v2 5/5] lib: utils/reset: Add generic da9063 reset driver
Heinrich Schuchardt
heinrich.schuchardt at canonical.com
Tue Oct 26 01:04:17 PDT 2021
On 10/15/21 15:19, Nikita Shubin wrote:
> From: Nikita Shubin <n.shubin at yadro.com>
>
> da9063 PMIC can be used to reset/shutdown the
> Sifive Unmatched board.
>
> shutdown is done simply by writing SHUTDOWN bit to
> DA9063_REG_CONTROL_F register.
>
> reset via setting WAKEUP bit in DA9063_REG_CONTROL_F
> register followed by masking POWER and POWER1 domains
> and setting STANDBY bit in DA9063_REG_CONTROL_A,
> originally discovered by Alexandre Ghiti on linux-riscv
> maillists.
>
> Signed-off-by: Nikita Shubin <n.shubin at yadro.com>
> ---
> v1 -> v2:
> - changed to sub dts node da9063-reset instead of relying on dlg,da9063
> - added priority dts node
> - return priority system_reset_check either readed from dts or default 1
> ---
> lib/utils/reset/fdt_reset.c | 2 +
> lib/utils/reset/fdt_reset_da9063.c | 214 +++++++++++++++++++++++++++++
> lib/utils/reset/objects.mk | 1 +
> 3 files changed, 217 insertions(+)
> create mode 100644 lib/utils/reset/fdt_reset_da9063.c
>
> diff --git a/lib/utils/reset/fdt_reset.c b/lib/utils/reset/fdt_reset.c
> index 168bb0c..92f37b0 100644
> --- a/lib/utils/reset/fdt_reset.c
> +++ b/lib/utils/reset/fdt_reset.c
> @@ -18,6 +18,7 @@ extern struct fdt_reset fdt_reset_htif;
> extern struct fdt_reset fdt_reset_sifive_test;
> extern struct fdt_reset fdt_reset_sunxi_wdt;
> extern struct fdt_reset fdt_reset_thead;
> +extern struct fdt_reset fdt_reset_da9063;
>
> static struct fdt_reset *reset_drivers[] = {
> &fdt_poweroff_gpio,
> @@ -26,6 +27,7 @@ static struct fdt_reset *reset_drivers[] = {
> &fdt_reset_sifive_test,
> &fdt_reset_sunxi_wdt,
> &fdt_reset_thead,
> + &fdt_reset_da9063,
> };
>
> int fdt_reset_init(void)
> diff --git a/lib/utils/reset/fdt_reset_da9063.c b/lib/utils/reset/fdt_reset_da9063.c
> new file mode 100644
> index 0000000..e3c9ced
> --- /dev/null
> +++ b/lib/utils/reset/fdt_reset_da9063.c
> @@ -0,0 +1,214 @@
> +/*
> + * SPDX-License-Identifier: BSD-2-Clause
> + *
> + * Copyright (c) 2021 YADRO
> + *
> + * Authors:
> + * Nikita Shubin <nshubin at yadro.com>
> + */
> +
> +#include <libfdt.h>
> +#include <sbi/sbi_error.h>
> +#include <sbi/sbi_console.h>
> +#include <sbi/sbi_ecall_interface.h>
> +#include <sbi/sbi_hart.h>
> +#include <sbi/sbi_system.h>
> +#include <sbi_utils/fdt/fdt_helper.h>
> +#include <sbi_utils/i2c/fdt_i2c.h>
> +#include <sbi_utils/reset/fdt_reset.h>
> +
> +#define DA9063_REG_PAGE_CON 0x00
> +#define DA9063_REG_CONTROL_A 0x0e
> +#define DA9063_REG_CONTROL_C 0x10
> +#define DA9063_REG_CONTROL_F 0x13
> +#define DA9063_REG_DEVICE_ID 0x81
> +
> +#define DA9063_CONTROL_A_CP_EN (1 << 7)
> +#define DA9063_CONTROL_A_M_POWER1_EN (1 << 6)
> +#define DA9063_CONTROL_A_M_POWER_EN (1 << 5)
> +#define DA9063_CONTROL_A_M_SYSTEM_EN (1 << 4)
> +#define DA9063_CONTROL_A_STANDBY (1 << 3)
> +#define DA9063_CONTROL_A_POWER1_EN (1 << 2)
> +#define DA9063_CONTROL_A_POWER_EN (1 << 1)
> +#define DA9063_CONTROL_A_SYSTEM_EN (1 << 0)
> +
> +#define DA9063_CONTROL_F_WAKEUP (1 << 2)
> +#define DA9063_CONTROL_F_SHUTDOWN (1 << 1)
> +#define DA9063_CONTROL_F_WATCHDOG (1 << 0)
> +
> +#define DA9063_CONTROL_C_DEF_SUPPLY (1 << 7)
> +#define DA9063_CONTROL_C_SLEW_RATE (1 << 4)
> +#define DA9063_CONTROL_C_OTPREAD_EN (1 << 3)
> +#define DA9063_CONTROL_C_AUTO_BOOT (1 << 2)
> +#define DA9063_CONTROL_C_DEBOUNCING (1 << 0)
> +
> +#define PMIC_CHIP_ID_DA9063 0x61
> +
> +static struct {
> + struct i2c_adapter *adapter;
> + uint32_t reg;
> + u8 priority;
> +} da9063 = {
> + .priority = 1
This value should be 0 until da9063_reset_init() succees. See comments
below.
> +};
> +
> +static int da9063_system_reset_check(u32 type, u32 reason)
> +{
> + switch (type) {
> + case SBI_SRST_RESET_TYPE_SHUTDOWN:
> + case SBI_SRST_RESET_TYPE_COLD_REBOOT:
> + case SBI_SRST_RESET_TYPE_WARM_REBOOT:
> + return da9063.priority;
> + }
> +
> + return 0;
> +}
> +
> +static inline int da9063_sanity_check(struct i2c_adapter *adap, uint32_t reg)
> +{
> + uint8_t val;
> + int rc = i2c_adapter_smbus_reg_write(adap, reg, DA9063_REG_PAGE_CON, 0x02);
> +
> + if (rc)
> + return rc;
> +
> + /* check set page*/
> + rc = i2c_adapter_smbus_reg_read(adap, reg, 0x0, &val);
> + if (rc)
> + return rc;
> +
> + if (val != 0x02)
> + return SBI_ENODEV;
> +
> + /* read and check device id */
> + rc = i2c_adapter_smbus_reg_read(adap, reg, DA9063_REG_DEVICE_ID, &val);
> + if (rc)
> + return rc;
> +
> + if (val != PMIC_CHIP_ID_DA9063)
> + return SBI_ENODEV;
> +
> + return 0;
> +}
> +
> +static inline int da9063_shutdown(struct i2c_adapter *adap, uint32_t reg)
> +{
> + int rc = i2c_adapter_smbus_reg_write(adap, da9063.reg,
> + DA9063_REG_PAGE_CON, 0x00);
> +
> + if (rc)
> + return rc;
> +
> + return i2c_adapter_smbus_reg_write(adap, da9063.reg,
> + DA9063_REG_CONTROL_F, DA9063_CONTROL_F_SHUTDOWN);
> +}
> +
> +static inline int da9063_reset(struct i2c_adapter *adap, uint32_t reg)
> +{
> + int rc = i2c_adapter_smbus_reg_write(adap, da9063.reg,
> + DA9063_REG_PAGE_CON, 0x00);
> +
> + if (rc)
> + return rc;
> +
> + rc = i2c_adapter_smbus_reg_write(adap, da9063.reg,
> + DA9063_REG_CONTROL_F, DA9063_CONTROL_F_WAKEUP);
> + if (rc)
> + return rc;
> +
> + return i2c_adapter_smbus_reg_write(adap, da9063.reg,
> + DA9063_REG_CONTROL_A,
> + DA9063_CONTROL_A_M_POWER1_EN |
> + DA9063_CONTROL_A_M_POWER_EN |
> + DA9063_CONTROL_A_STANDBY);
> +}
> +
> +static void da9063_system_reset(u32 type, u32 reason)
> +{
> + struct i2c_adapter *adap = da9063.adapter;
> + uint32_t reg = da9063.reg;
> + int rc;
> +
> + if (adap) {
> + /* may include clock init */
> + i2c_adapter_configure(adap);
> +
> + /* sanity check */
> + rc = da9063_sanity_check(adap, reg);
> + if (rc) {
> + sbi_printf("%s: chip is not da9063 PMIC\n", __func__);
> + goto skip_reset;
> + }
> +
> + switch (type) {
> + case SBI_SRST_RESET_TYPE_SHUTDOWN:
> + da9063_shutdown(adap, reg);
> + break;
> + case SBI_SRST_RESET_TYPE_COLD_REBOOT:
> + case SBI_SRST_RESET_TYPE_WARM_REBOOT:
> + da9063_reset(adap, reg);
> + break;
> + }
> +
> + while
> + (1);
> +skip_reset:
> + }
> +
> + sbi_hart_hang();
> +}
> +
> +static struct sbi_system_reset_device da9063_reset_i2c = {
> + .name = "da9063-reset",
> + .system_reset_check = da9063_system_reset_check,
> + .system_reset = da9063_system_reset
> +};
> +
> +static int da9063_reset_init(void *fdt, int nodeoff,
> + const struct fdt_match *match)
> +{
> + int rc, i2c_dev, i2c_bus, len;
> + const fdt32_t *val;
> + struct i2c_adapter *adapter;
> + uint64_t addr;
> +
> + /* find dlg,da9063 parent node */
> + i2c_dev = fdt_parent_offset(fdt, nodeoff);
> + if (i2c_dev < 0)
> + return i2c_dev;
> +
> + rc = fdt_get_node_addr_size(fdt, i2c_dev, 0, &addr, NULL);
> + if (rc)
> + return rc;
If you return anything but -ENODEV or 0 to fdt_reset_init(),
fdt_reset_init will return a non-zero return value and the board will
hang without any console message.
I see the following alternative solutions:
1) Move the initialization of the console before all other devices and
provide error messages.
2) Return -ENODEV if the problem does not require hanging.
3) Let fdt_reset_init() just continue in case of any initialization error.
1) makes sense anyway. But hanging is a bad idea.
2) and 3) require that system_reset_check return 0 if the initialization
failed.
Best regards
Heinrich
> +
> + da9063.reg = addr;
> + val = fdt_getprop(fdt, nodeoff, "priority", &len);
> + if (len > 0)
> + da9063.priority = fdt32_to_cpu(*val);
> +
> + /* find i2c bus parent node */
> + i2c_bus = fdt_parent_offset(fdt, i2c_dev);
> + if (i2c_bus < 0)
> + return i2c_bus;
> +
> + /* i2c adapter get */
> + rc = fdt_i2c_adapter_get(fdt, i2c_bus, &adapter);
> + if (rc)
> + return rc;
> +
> + da9063.adapter = adapter;
> +
> + sbi_system_reset_add_device(&da9063_reset_i2c);
> +
> + return 0;
> +}
> +
> +static const struct fdt_match da9063_reset_match[] = {
> + { .compatible = "da9063-reset", .data = (void *)TRUE },
> + { },
> +};
> +
> +struct fdt_reset fdt_reset_da9063 = {
> + .match_table = da9063_reset_match,
> + .init = da9063_reset_init,
> +};
> diff --git a/lib/utils/reset/objects.mk b/lib/utils/reset/objects.mk
> index 6c95db3..cfe4c09 100644
> --- a/lib/utils/reset/objects.mk
> +++ b/lib/utils/reset/objects.mk
> @@ -14,3 +14,4 @@ libsbiutils-objs-y += reset/fdt_reset_sifive_test.o
> libsbiutils-objs-y += reset/fdt_reset_sunxi_wdt.o
> libsbiutils-objs-y += reset/fdt_reset_thead.o
> libsbiutils-objs-y += reset/fdt_reset_thead_asm.o
> +libsbiutils-objs-y += reset/fdt_reset_da9063.o
>
More information about the opensbi
mailing list